Hi, I have a Nokia 6 and after updating it to Android 8.0 the capacitive Buttons don't work but they light up when pressing them.
Renix25 said:
Hi, I have a Nokia 6 and after updating it to Android 8.0 the capacitive Buttons don't work but they light up when pressing them.
Click to expand...
Click to collapse
make a factory reset, this will help u out of this problem, same was happened with me too
just make a backup before doing this, factory reset will remove all your data
Sometimes clearing the cache in the boot recovery menu does the trick, but in my experience its best to do a factory fresh reset after any major OS updates to avoid little bugs.
Related
GOOD DAY I HAVE AN HTC BLACKSTON AND HAVE A STRANGE PROBLEM WHEN I FINISH A PHONE CALL THE PHONE FREEZ AND REFUSE TO WORK. AFTER EACH CALL I HAVE TO DO A SOFT RESET CAN YOU HELP PLZ WITH THIS PROBLEM 10XXXXXX
abiis said:
GOOD DAY I HAVE AN HTC BLACKSTON AND HAVE A STRANGE PROBLEM WHEN I FINISH A PHONE CALL THE PHONE FREEZ AND REFUSE TO WORK. AFTER EACH CALL I HAVE TO DO A SOFT RESET CAN YOU HELP PLZ WITH THIS PROBLEM 10XXXXXX
Click to expand...
Click to collapse
Could you provide us with the following info:
Which rom are you currently using?
Have you recently flashed a new rom? Problem may be with this rom in particular
What is your current SPL?
When did this first start happening?
Have you recently installed any apps?
Have you recently changed any registry settings/tweaks?
This may help us narrow down your issue
Ta
Rick
Fallen Spartan said:
Could you provide us with the following info:
Which rom are you currently using?
Have you recently flashed a new rom? Problem may be with this rom in particular
What is your current SPL?
When did this first start happening?
Have you recently installed any apps?
Have you recently changed any registry settings/tweaks?
This may help us narrow down your issue
Ta
Rick
Click to expand...
Click to collapse
good day
* i am using original rom 1.14.421.5 (25590) wwe
*no didnt flash any rom
*IT HAPPENS WITH ME SINCE 2 WEEK
*YES GPS SOFTWARES BUT AFTER the problem
*ONLY THE REGISTARY OF CAM TO SHOW THE EXTRAS AND NETFRAME FROM 3.5 TO 3.7 ALL THIS IS SINC TWO DAYS
NB= MY PROGRAM MEMORY IS USING 45% OF THE CPU IS THAT NORMAL WHEN I DO SOFT RESET IT RETURN TO 37%
thanks
any ideas plz
Hi there abiis,
You can try resetting your phone back to factory settings by performing a Hard Reset. Try to uninstall any programs that you may have recently installed first that may be causing a conflict. You can backup any data on your phone (such as Contacts, Messages, etc) using PIMBackup before you perform a Hard Reset.
To perform a Hard Reset, try the following:
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.
3. Release the VOLUME UP and VOLUME DOWN buttons, press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
Mastoid said:
Hi there abiis,
You can try resetting your phone back to factory settings by performing a Hard Reset. Try to uninstall any programs that you may have recently installed first that may be causing a conflict. You can backup any data on your phone (such as Contacts, Messages, etc) using PIMBackup before you perform a Hard Reset.
To perform a Hard Reset, try the following:
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.
3. Release the VOLUME UP and VOLUME DOWN buttons, press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
Click to expand...
Click to collapse
i know this option but i need a solution without having a hard reset thanks any way
can't you just backup before hardreset ?
To be honest, I think a Hard Reset would resolve your problem with the dropped calls... but if you are unwilling to perform a hard reset, then I would suggest that you try sending your phone back to HTC for repair assuming it is still under warranty?
Best Regards.
well this depends greatly
which end call button is he using. if it the red software one then its a software problem, and this would be remedied with a had reset
if its the one on the bottom of the phone with the 4 button (start call, home, back and end call) then this could indicate a hardware issue and in that case i recommend a return to vendor
So, i got a samsung galaxy Note 4 from Verizon. My phone uses data even when i turn off my data. Do you guys have had a similar experience?
Have you tried doing a hard factory reset on your device to seemif that would help?
DarkGuyver said:
Have you tried doing a hard factory reset on your device to seemif that would help?
Click to expand...
Click to collapse
I tried Factory reset. Nothing happened
hellothere93 said:
I tried Factory reset. Nothing happened
Click to expand...
Click to collapse
But did you do a hard factory reset by pressing and holding the power, volume up and hold button during start up then releasing them when you see the Android System Recovery screen loading screen
Umm yea. I did that
hello there, i have flashed Official marshmallow ROM, from stock Lollipop build # ALE-AL21C185B188 to ALE-AL21C185B525, I just did hard reset, but now earlier it was doing OK, but now its screen start flickering right from the first boot after Reset... I don't know what went Wrong, yes I did wipe Cache, Dalvik Cache & System.... Does any have any solution.
Khugiani said:
hello there, i have flashed Official marshmallow ROM, from stock Lollipop build # ALE-AL21C185B188 to ALE-AL21C185B525, I just did hard reset, but now earlier it was doing OK, but now its screen start flickering right from the first boot after Reset... I don't know what went Wrong, yes I did wipe Cache, Dalvik Cache & System.... Does any have any solution.
Click to expand...
Click to collapse
Try downloading MM full-ota from Huawei site, extract it and put update.app on sdcard/dload (if there isn't a folder called dload, create it); shut down your phone and boot it long pressing power button (but stop pressing when screen powers up) and both volume + and volume - until it vibrates. It will reset your phone and solve that problem.
If it doesn't work, send me a photo of what happens
hi, i run marshmallow 6 on yotaphone 2, everything was fine, and after enabling phone encryption the EPD screen touch stopped working, i mean i can see, but if i touch anything it wont work on the EPD screen, it does work on color screen tho. I read phone encryption can't be disabled on Marshmallow, even doing a factory reset, any idea on how to fix that?
Regards,
photek01 said:
hi, i run marshmallow 6 on yotaphone 2, the russian update, everything was fine, and after enabling phone encryption the EPD screen touch stopped working, i mean i can see, but if i touch anything it wont work on the EPD screen, it does work on color screen tho.
I read phone encryption can't be disabled on Marshmallow, even doing a factory reset, any idea on how to fix that? flashing the european one is possible?
Regards,
Click to expand...
Click to collapse
Got reply with solution from YotaPhone Facebook support, sharing it in case someone has the same problem:
Unfortunately, encryption can not be undone.
In this situation, we recommend that you do a factory reset.
To do this, you need to download the phone in Recovery mode. To do this, turn off the phone. Press volume+ key and power key and hold 20-25 seconds. In the menu that appears , please Choose the "Wipe Data / Factory Reset" item by pressing the volume keys. To confirm your selection please press on the power button. In the menu please click Choose "Yes" and confirm by pressing the power button.
Please note that this procedure all personal data on your smartphone will be deleted.
Click to expand...
Click to collapse
Hi. I'm using s10 5g running android 11. After updating to android 11 my phone does lag a lot so i decided to reset my phone. Since my power button is broken so i can only reset via Settings. I have something to ask you:
My Secure Folder contains a lot of files, can i reset without losing them?
Will resetting solve my lag? apps even reset when I back to home, use other app and back to that app. it also takes me up to ~10s from tapping shutter button to taking pic. Camera sometimes out when swipe to "other modes".
Which section in reset in settings equivatlent to factory reset/wipe /cache, dalvik and wipe /data? I previously use TWRP to reset but i cant now (broken power button). Resetting options of samsung really confuse me.
Can reset in Settings be done without power button?
Thank you