Related
I get model mismatch every single time, I have downloaded the right firmware.. Downloaded the one said to do 5 DIFFERENT ONES that are all essentially the same, I rooted succesffully, then tried to flash xposed and failed obv.
.."Stock-S7-EDGE-ATT_G935AATT2APG1.zip"
"AP_G935AUCS2APF2_CL7617530_QB9897831_REV02_user_low_ship_MULTI_CERT.tar.md5"
Etc. Idk what to do anymore, stuck in download or recovery mode.
"Downloaded the one said to do 5 DIFFERENT ONES that are essentially the same," what does that mean? You downloaded the firmware zip file that had 5 seperate files in it, and they're all essentially the same? See how you quoted one of the files inside? Notice how it starts with "AP"? In odin, you click the AP button, then add that file in that AP slot. Then the one that starts with "BL" in the BL slot, and so on and so forth, until you have all 5 files in their respective slots. THEN you start the flashing process. Did you do that? If that didn't work, did you make sure the md5 number listed at the download screen match after you downloaded the zip file? Do you have an md5 checksum program on your computer? You can easily find a free one by doing a quick google search. You could also maybe try downloading and flashing a different/newer stock AT&T firmware.
As for xposed, you first need to download and install this version of the xposed apk from the xposed website: XposedInstaller_3.0_alpha4.apk
Then, if/when rooted find and flash this version of xposed framework in flashfire:
xposed-v85.1-sdk23-arm64-custom-build-by-wanam-20160530.zip
If you're not having any luck, and your phone is still stuck in download or recovery mode, you can still power it off for the time being using the following steps:
If it's in recovery mode, you'll have options listed, like "reboot system now," and, "power off device." You can toggle through each choice using the volume up and down buttons, and once you highlight the one you want, hit the power button to select it. You can go to "power off device" in recovery mode and turn your phone off for now if you don't want to have to worry about it. If your phone is in download mode, it'll either be at the warning screen where you can hit volume up to continue, or volume down to cancel and restart the phone. If it is all the way in download mode, it'll say "downloading... do not turn off target !!" If it is on the warning screen, just continue into into download mode. If it is in download mode already, or you just continued into download mode, and you want to turn the phone off, press and hold volume up, volume down, power, and home button and hold them all down at the same time until the phone shuts off. Immediately after, let go of all the buttons, and then press and hold the volume up, home, and power buttons until the phone comes back on, and in the top left corner, in blue, it'll say "Recovery booting." It is then that you let go of all the buttons. You will enter recovery there and be able to power the device off.
Anyway, I hope you already got it fixed, and if not, I hope this information helped. I'm not trying to be mean, but you really need to search through all of the forums, read everything, read people's comments for information on how to do these sort of things properly, and how to fix the problems. Rooting, installing custom roms and xposed is a little different on newer devices now. Mistakes can be much more costly now than they used to be, so unless you've read thoroughly on such processes, and/or have found a youtube video that helps and you're feeling confident about it, you might want to reconsider attempting to apply these kinds of changes to your phone. If you have any friends that are good at this stuff, maybe that would be another way as well. Anyway, best of luck to you.
Try Odin 3.12.3 or PrinceComsy version It work for me. My case was that I upgrade to the firmware 935u version bootloader v4 and I wanted go back to PH1 that the bootloader is v2. Make sure to do factory reset before do any flash with odin (I don't know if that matter but works for me). Hope this work for you.
xjimmy said:
"Downloaded the one said to do 5 DIFFERENT ONES that are essentially the same," what does that mean? You downloaded the firmware zip file that had 5 seperate files in it, and they're all essentially the same? See how you quoted one of the files inside? Notice how it starts with "AP"? In odin, you click the AP button, then add that file in that AP slot. Then the one that starts with "BL" in the BL slot, and so on and so forth, until you have all 5 files in their respective slots. THEN you start the flashing process. Did you do that? If that didn't work, did you make sure the md5 number listed at the download screen match after you downloaded the zip file? Do you have an md5 checksum program on your computer? You can easily find a free one by doing a quick google search. You could also maybe try downloading and flashing a different/newer stock AT&T firmware.
As for xposed, you first need to download and install this version of the xposed apk from the xposed website: XposedInstaller_3.0_alpha4.apk
Then, if/when rooted find and flash this version of xposed framework in flashfire:
xposed-v85.1-sdk23-arm64-custom-build-by-wanam-20160530.zip
If you're not having any luck, and your phone is still stuck in download or recovery mode, you can still power it off for the time being using the following steps:
If it's in recovery mode, you'll have options listed, like "reboot system now," and, "power off device." You can toggle through each choice using the volume up and down buttons, and once you highlight the one you want, hit the power button to select it. You can go to "power off device" in recovery mode and turn your phone off for now if you don't want to have to worry about it. If your phone is in download mode, it'll either be at the warning screen where you can hit volume up to continue, or volume down to cancel and restart the phone. If it is all the way in download mode, it'll say "downloading... do not turn off target !!" If it is on the warning screen, just continue into into download mode. If it is in download mode already, or you just continued into download mode, and you want to turn the phone off, press and hold volume up, volume down, power, and home button and hold them all down at the same time until the phone shuts off. Immediately after, let go of all the buttons, and then press and hold the volume up, home, and power buttons until the phone comes back on, and in the top left corner, in blue, it'll say "Recovery booting." It is then that you let go of all the buttons. You will enter recovery there and be able to power the device off.
Anyway, I hope you already got it fixed, and if not, I hope this information helped. I'm not trying to be mean, but you really need to search through all of the forums, read everything, read people's comments for information on how to do these sort of things properly, and how to fix the problems. Rooting, installing custom roms and xposed is a little different on newer devices now. Mistakes can be much more costly now than they used to be, so unless you've read thoroughly on such processes, and/or have found a youtube video that helps and you're feeling confident about it, you might want to reconsider attempting to apply these kinds of changes to your phone. If you have any friends that are good at this stuff, maybe that would be another way as well. Anyway, best of luck to you.
Click to expand...
Click to collapse
I did all of this, except for the check md5thing, will try this today.
Yeah so im pretty sure my phone is done for good, I have literally tried to flash every stock firmware, blah blah there is. ik to put Bl with bl ap with ap etc. lol it used to be so easy...
brandonjames1212 said:
Yeah so im pretty sure my phone is done for good, I have literally tried to flash every stock firmware, blah blah there is. ik to put Bl with bl ap with ap etc. lol it used to be so easy...
Click to expand...
Click to collapse
What are you flashing FROM? From what you listed in the OP, you are trying to flash to APG1? What the device is on now could be on a newer firmware
kangi26 said:
What are you flashing FROM? From what you listed in the OP, you are trying to flash to APG1? What the device is on now could be on a newer firmware
Click to expand...
Click to collapse
I honestly dnt knnow what the phone originally was, I forgot, but i have tried pg1 Pf2 pb4.. atleast those are some of the files i have tried.. cant find any others.. currently about to try ph1
Ph1 failed too.
idk if this helps anything, but Here is exactly what it says on my download mode
"ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-G935A
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FAP LOCK: ON
WARRANTY VOID: 0x0
QUALCOM SECUREBOOT: ENABLE
AP SWREV: B4(2,1,1,1,1) K1 S3
SECURE DOWNLOAD: ENABLE
brandonjames1212 said:
I honestly dnt knnow what the phone originally was, I forgot, but i have tried pg1 Pf2 pb4.. atleast those are some of the files i have tried.. cant find any others.. currently about to try ph1
Ph1 failed too.
idk if this helps anything, but Here is exactly what it says on my download mode
"ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-G935A
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FAP LOCK: ON
WARRANTY VOID: 0x0
QUALCOM SECUREBOOT: ENABLE
AP SWREV: B4(2,1,1,1,1) K1 S3
SECURE DOWNLOAD: ENABLE
Click to expand...
Click to collapse
If you are trying to flash the stock ROM and you are on different bootloaders you are going to run into issues. I THINK (and could be wrong), you may be on version 4 (based off of the "AP SWREV: B4(2,1,1,1,1) K1 S3") again, I'm not positive on my assumption here, but, if that's the case you need to flash a stock ROM that is on version 4 of the bootloaders, something like G935AUCS4API2 (BL4)
kangi26 said:
If you are trying to flash the stock ROM and you are on different bootloaders you are going to run into issues. I THINK (and could be wrong), you may be on version 4 (based off of the "AP SWREV: B4(2,1,1,1,1) K1 S3") again, I'm not positive on my assumption here, but, if that's the case you need to flash a stock ROM that is on version 4 of the bootloaders, something like G935AUCS4API2 (BL4)
Click to expand...
Click to collapse
Thank you for responding, but I did download that one yesterday and tried that one too.. got the same error sadly ;/
brandonjames1212 said:
Thank you for responding, but I did download that one yesterday and tried that one too.. got the same error sadly ;/
Click to expand...
Click to collapse
If you go into Recovery Mode, you should be able to see what ROM you are on. From there, I'd do a system wipe like xjimmy suggested, power off, boot to Download mode, and try to flash the ROM that has matching bootloader
kangi26 said:
If you go into Recovery Mode, you should be able to see what ROM you are on. From there, I'd do a system wipe like xjimmy suggested, power off, boot to Download mode, and try to flash the ROM that has matching bootloader
Click to expand...
Click to collapse
Android recovery
MMB29M.G935AUCS4API2
samsung/hero2qlteuc/hero2qlteatt
6.0.1/MMB29M/G935AUCS4API2
I factory reset, But can you refer me to what i should download for the above.. tired of downloading wrong file and all.. lol have downloaded over 13gb worth of files.. dnt wanna fail again
Lol i see pi2... ive already done that one tho, but as he said before, i reset this time and gonna try again.. already have files for that one.. so about to try
brandonjames1212 said:
Android recovery
MMB29M.G935AUCS4API2
samsung/hero2qlteuc/hero2qlteatt
6.0.1/MMB29M/G935AUCS4API2
I factory reset, But can you refer me to what i should download for the above.. tired of downloading wrong file and all.. lol have downloaded over 13gb worth of files.. dnt wanna fail again
Click to expand...
Click to collapse
So you are on V4 Bootloaders, and API2, which is the current stock release.
I would
Download the stock API2 ROM from HERE and put them all on your desktop
Open Odin
In Recovery mode, wipe the device
Restart the phone in Download Mode then plug the phone into the PC
Put the downloaded files to their slots in Odin, and hit start
kangi26 said:
So you are on V4 Bootloaders, and API2, which is the current stock release.
I would
Download the stock API2 ROM from HERE and put them all on your desktop
Open Odin
In Recovery mode, wipe the device
Restart the phone in Download Mode then plug the phone into the PC
Put the downloaded files to their slots in Odin, and hit start
Click to expand...
Click to collapse
That is the exactly files i have currently trying again now that i reset phone.
OMG thank you guys so much, after a thousand tries.. it ended up being the files you linked (Which were the original files i used the very first time) I just never did the factory reset!!! after doing the reset and trying again!! its currently started actually through the process, instead of saying model mismatch ! hopefully it does the entire thing with no errrors!! THANK YOU GUYS SO MUCH...
brandonjames1212 said:
OMG thank you guys so much, after a thousand tries.. it ended up being the files you linked (Which were the original files i used the very first time) I just never did the factory reset!!! after doing the reset and trying again!! its currently started actually through the process, instead of saying model mismatch ! hopefully it does the entire thing with no errrors!! THANK YOU GUYS SO MUCH...
Click to expand...
Click to collapse
Excellent!
kangi26 said:
If you are trying to flash the stock ROM and you are on different bootloaders you are going to run into issues. I THINK (and could be wrong), you may be on version 4 (based off of the "AP SWREV: B4(2,1,1,1,1) K1 S3") again, I'm not positive on my assumption here, but, if that's the case you need to flash a stock ROM that is on version 4 of the bootloaders, something like G935AUCS4API2 (BL4)
Click to expand...
Click to collapse
Yes I'm trying to flash the stock firmware but I flashed the rooted bootloader in Odin I think, lol so that may be why I'm having issues. Cause mine fails every single time for the att version and it's driving me nuts and I can't find any video tutorial on it at all, and smart switch won't work with the att one lol Dicks
kshansen7692 said:
Yes I'm trying to flash the stock firmware but I flashed the rooted bootloader in Odin I think, lol so that may be why I'm having issues. Cause mine fails every single time for the att version and it's driving me nuts and I can't find any video tutorial on it at all, and smart switch won't work with the att one lol Dicks
Click to expand...
Click to collapse
Did you do a Factory Reset in Recovery first?
kangi26 said:
Did you do a Factory Reset in Recovery first?
Click to expand...
Click to collapse
No I haven't I'm about to and I'll let you know what happens
kangi26 said:
Did you do a Factory Reset in Recovery first?
Click to expand...
Click to collapse
OK did a reset wiped her out set it up and wallllllaaaa it's fixed golden!! You sir helped a bunch thanks again this thread saved my nuggets
kshansen7692 said:
OK did a reset wiped her out set it up and wallllllaaaa it's fixed golden!! You sir helped a bunch thanks again this thread saved my nuggets
Click to expand...
Click to collapse
Sorry to come back to the party so late. Things have been hectic here. I'm glad these guys were able to get you all fixed up.
[Update as of May 23, 2020] - Thread no longer active and all download links are invalid
A brief history - A few weeks ago, i got fed up of EMUI and all the bloat. EMUI has a bunch of very useful features but i did miss the AOSP look and feel, root advantages. So, i tried magisk and couldn't get it to work with EMUI(pre 15.4 version). So i switched to Open krin 8.1 AOSP. Used it for a few days but it was too much of a sacrifice (VOLTE and Camera) and occasional buggyness for me to live with.
During this adventure, i found myself (multiple times) with a bricked device (A critical brick with FRP on aswell!).
After a lot of struggle(Specially to find working download links), i'm making this thread, to help fellow users like me.
Before we get started,
This is tested on my device but may not necessarily work with yours! I'm not responsible for any loss/damage/whatever caused because of the information in this thread.
Note 0 : Do not Quote the entire post!!
Note 1 : This guide will be updated as and when necessary.
Note 2 : These methods are only tested on Honor 8 Pro - Indian Variant(DUK-L09-C675)
Note 3 : This guide assumes the bootloader is unlocked.
Note 4 : Do text if you need any clarification on any step!
Thanks to @nanortemis (https://forum.xda-developers.com/honor-8-pro/how-to/restoring-dukfullotaromflasher-t3741223) for the ROM flasher
Download links for every file needed - Download links are now removed.
Let's get started.
Reboot your device into bootloader mode.
How? Method 11. Shut down the phone.
2. Hold the volume down button and connect the usb cable connected to your PC.Method 2 (If device is boot looping)1. Press and hold power button untill phone reboots.
2. Hold volume up key to boot to e-recovery.
3. Click shutdown.
4. Now follow Method 1.
Now that you are in bootloader mode,
You may find yourself in one of these three conditions
Condition 1. You read Phone unlock , FRP unlock ( Hurray !! This is the easiest to recover from.)
Condition 2. You read Phone unlock , FRP Lock AND you have TWRP flashed and working. ( Phew , there is still hope!)
Condition 3. You read Phone unlock , FRP Lock AND you have STOCK recovery! (Not sure how you got here, but this method is not tested by me.) (Please text if someone is stuck in this situation. I Will think of something if needed)(Guide is not yet updated with instructions on how to do this yet!)
Steps to recover from condition 1
1. Download stock rom files and stock rom flasher(from here) ( I have updated files for indian version.
Please get the version appropriate to your location.)
2. Extract files into a folder and transfer them to an exteral SD or USB OTG(If you can get it to work. I
Couldn't get my OTG to be detected) and insert it into your phone.
3. Reboot to recovery.
How? 1. Shutdown the deive(Look above for instructions, if needed.)
2. Hold volume up and then simultaniously press the power key. 4. In TWRP, erase everything except micro-sd/otg.
5. Reboot the device into recovery.
6. Flash the zip with the file name "FlashThisZip-DUK_FullOTA_ROM_flasher".
7. Done ! You should now be on Stock Indian oreo rom 8.0.0.323
8. (Optional) Relock bootloader (Check other guids please.)
Steps to recover from condition 2
1. Download and extract the twrp recovery files i made. ( You may use any stock emui (all partition)
backups you have made!
2. Transer the TWRP folder to External SD / OTG and insert it into the phone.
3. Reboot to recovery.
How? 1. Shutdown the deive(Look above for instructions, if needed.)
2. Hold volume up and then simultaniously press the power key. 4. In TWRP, erase everything except micro-sd/otg.
5. Restore the backup.
6. Done !!! To flash full stock fresh rom, read on.
7. (Optional) Boot up the phone, head into settings, enable developer options and enable OEM unlock.
8. (Optional) Now, simply follow steps from Condition 1(which is above!)
Guide is still under construction. I got this out as soon as i can to help anyone who is stuck. Please ignore any typos(They will be fixed when i find time to make this guide better).
All the best :good: :fingers-crossed:
---------------------------------------
Guide created on : 10 June, 2018
Last modification : None
Anirudh A said:
A brief history - A few weeks ago, i got fed up of EMUI and all the bloat. EMUI has a bunch of very useful features but i did miss the AOSP look and feel, root advantages. So, i tried magisk and couldn't get it to work with EMUI(pre 15.4 version). So i switched to Open krin 8.1 AOSP. Used it for a few days but it was too much of a sacrifice (VOLTE and Camera) and occasional buggyness for me to live with.
During this adventure, i found myself (multiple times) with a bricked device (A critical brick with FRP on aswell!).
After a lot of struggle(Specially to find working download links), i'm making this thread, to help fellow users like me.
Before we get started,
This is tested on my device but may not necessarily work with yours! I'm not responsible for any loss/damage/whatever caused because of the information in this thread.
Note 0 : Do not Quote the entire post!!
Note 1 : This guide will be updated as and when necessary.
Note 2 : These methods are only tested on Honor 8 Pro - Indian Variant(DUK-L09-C675)
Note 3 : This guide assumes the bootloader is unlocked.
Note 4 : Do text if you need any clarification on any step!
Thanks to @nanortemis (https://forum.xda-developers.com/honor-8-pro/how-to/restoring-dukfullotaromflasher-t3741223) for the ROM flasher
Download links for every file needed - https://drive.google.com/open?id=1qkFa9uMWWVWwnF3GS75Pzw6vDQ9GKx6J
Let's get started.
Reboot your device into bootloader mode.
How? Method 11. Shut down the phone.
2. Hold the volume down button and connect the usb cable connected to your PC.Method 2 (If device is boot looping)1. Press and hold power button untill phone reboots.
2. Hold volume up key to boot to e-recovery.
3. Click shutdown.
4. Now follow Method 1.
Now that you are in bootloader mode,
You may find yourself in one of these three conditions
Condition 1. You read Phone unlock , FRP unlock ( Hurray !! This is the easiest to recover from.)
Condition 2. You read Phone unlock , FRP Lock AND you have TWRP flashed and working. ( Phew , there is still hope!)
Condition 3. You read Phone unlock , FRP Lock AND you have STOCK recovery! (Not sure how you got here, but this method is not tested by me.) (Please text if someone is stuck in this situation. I Will think of something if needed)(Guide is not yet updated with instructions on how to do this yet!)
Steps to recover from condition 1
1. Download stock rom files and stock rom flasher(from here) ( I have updated files for indian version.
Please get the version appropriate to your location.)
2. Extract files into a folder and transfer them to an exteral SD or USB OTG(If you can get it to work. I
Couldn't get my OTG to be detected) and insert it into your phone.
3. Reboot to recovery.
How?1. Shutdown the deive(Look above for instructions, if needed.)
2. Hold volume up and then simultaniously press the power key.4. In TWRP, erase everything except micro-sd/otg.
5. Reboot the device into recovery.
6. Flash the zip with the file name "FlashThisZip-DUK_FullOTA_ROM_flasher".
7. Done ! You should now be on Stock Indian oreo rom 8.0.0.323
8. (Optional) Relock bootloader (Check other guids please.)
Steps to recover from condition 2
1. Download and extract the twrp recovery files i made. ( You may use any stock emui (all partition)
backups you have made!
2. Transer the TWRP folder to External SD / OTG and insert it into the phone.
3. Reboot to recovery.
How?1. Shutdown the deive(Look above for instructions, if needed.)
2. Hold volume up and then simultaniously press the power key.4. In TWRP, erase everything except micro-sd/otg.
5. Restore the backup.
6. Done !!! To flash full stock fresh rom, read on.
7. (Optional) Boot up the phone, head into settings, enable developer options and enable OEM unlock.
8. (Optional) Now, simply follow steps from Condition 1(which is above!)
Guide is still under construction. I got this out as soon as i can to help anyone who is stuck. Please ignore any typos(They will be fixed when i find time to make this guide better).
All the best :good: :fingers-crossed:
---------------------------------------
Guide created on : 10 June, 2018
Last modification : None
Click to expand...
Click to collapse
woaw.. is very well created! it might be handy in any case! thank you
Sent from my DUK-L09 using Tapatalk
Hi, Thanks for the guide.
However, I'm in deep shi*. I'm currently stuck in bootloop, I'm even unable to get to e-recovery. I'm able to get to fastboot though. Even though, I read PHONE Locked and FRP Unlock. What options do I have? I got my bootloader unlock code from EMUI but when I try to unlock bootloader, it says that the password is incorrect..
Check your password
tuniekonematei said:
Hi, Thanks for the guide.
However, I'm in deep shi*. I'm currently stuck in bootloop, I'm even unable to get to e-recovery. I'm able to get to fastboot though. Even though, I read PHONE Locked and FRP Unlock. What options do I have? I got my bootloader unlock code from EMUI but when I try to unlock bootloader, it says that the password is incorrect..
Click to expand...
Click to collapse
Hey,
While i was messing around with my H8P bootloader, i noticed an additional 's' in my password ! Probably while saving it would have got added.
I recommend cross checking if you're actually using the right password. (To the extent that you go through the request process again! Recommend doing this and taking screenshots as after a few days, you will no longer be able to request codes anymore!).
Also, post the error you get while trying to unlock the bootloader.
Anirudh A said:
Hey,
While i was messing around with my H8P bootloader, i noticed an additional 's' in my password ! Probably while saving it would have got added.
I recommend cross checking if you're actually using the right password. (To the extent that you go through the request process again! Recommend doing this and taking screenshots as after a few days, you will no longer be able to request codes anymore!).
Also, post the error you get while trying to unlock the bootloader.
Click to expand...
Click to collapse
Hi Anirudh,
I've gone through the same process several times and every single time I get the same Bootloader Password with the same error when trying to unlock:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
That's the password Huawei gives me:
(I'm using H8 NON-pro version btw, sorry)
tuniekonematei said:
Hi Anirudh,
I've gone through the same process several times and every single time I get the same Bootloader Password with the same error when trying to unlock:
That's the password Huawei gives me:
(I'm using H8 NON-pro version btw, sorry)
Click to expand...
Click to collapse
Hey. Sorry for the late reply. Before investigating further, any progress?
Anirudh A said:
Hey. Sorry for the late reply. Before investigating further, any progress?
Click to expand...
Click to collapse
Hi,
Eventually I had to pay 15€ for DC Phoenix to be able to flash my Honor. Absolutely nothing helped and none of C434 firmwares worked on C900B131 rollback package, therefore I had to flash C636B130. I received an update to B360 which worked just fine. Then B380 update came which is a nightmare that bricks our phones and the reason I bricked my Honor 8 the first time (back in October of 2017). I had to reflash it through DC Phoenix once again. Later on I tried to move from B360 to B389 which bricked my phone AGAIN. So I am staying on B360 which, I think, works just fine. It is sad that I am unable to get the latest firmware updates but it is what it is. Although I really hate the notification on my Settings icon which informs to update the phone. I disabled all the Updater notifications and so on but it is still there.
I like Honor 8 and I've been always recomending it to everyone but as of now I doubt I'll ever buy Huawei phone again.
tuniekonematei said:
Hi,
Eventually I had to pay 15€ for DC Phoenix to be able to flash my Honor. Absolutely nothing helped and none of C434 firmwares worked on C900B131 rollback package, therefore I had to flash C636B130. I received an update to B360 which worked just fine. Then B380 update came which is a nightmare that bricks our phones and the reason I bricked my Honor 8 the first time (back in October of 2017). I had to reflash it through DC Phoenix once again. Later on I tried to move from B360 to B389 which bricked my phone AGAIN. So I am staying on B360 which, I think, works just fine. It is sad that I am unable to get the latest firmware updates but it is what it is. Although I really hate the notification on my Settings icon which informs to update the phone. I disabled all the Updater notifications and so on but it is still there.
I like Honor 8 and I've been always recomending it to everyone but as of now I doubt I'll ever buy Huawei phone again.
Click to expand...
Click to collapse
DC Phoenix always to the rescue. Unfortunately , this is the sad state of Huawei/Honor . Your device should be fixed free , because of Honors fault. Now that they're also not giving out unlock codes after a month , it's a direct screw you to all the advanced users. There's no predicting how this gamble will play out for them. I'm also not going to recommend Huawei /Honor to any advanced users . One plus has my money. However , Huaweis midrangers and just about OK for regular use.
i just restore your backup now stuck with bootloop frp lock phone lock
jazzy ╰_╯ said:
i just restore your backup now stuck with bootloop frp lock phone lock
Click to expand...
Click to collapse
Ensure your phone varient is what is specified in this thread. Phone lock is impossible. Please mention condition before, steps taken.
jazzy ╰_╯ said:
i just restore your backup now stuck with bootloop frp lock phone lock
Click to expand...
Click to collapse
Also, try factory reset, with data erase
Anirudh A said:
Ensure your phone varient is what is specified in this thread. Phone lock is impossible. Please mention condition before, steps taken.
Click to expand...
Click to collapse
i was on condition 2 i formated the phone as you said and downloaded twrp back up when i restored the back the first boot took me to erecovery then i try to go to twrp but it was gone i booted into fastboot and saw that phone is locked frp is lock stuck with bootloop ( which boots up my device to erecovery again and again) i do have an indian varient and was already on mm it was just that i had rooted device with magisk where i was not able to pass safenet so i thought to unroot it to stock and reroot again
---------- Post added at 01:52 AM ---------- Previous post was at 01:51 AM ----------
Anirudh A said:
Also, try factory reset, with data erase
Click to expand...
Click to collapse
already tried nothing happen
Anirudh A said:
Also, try factory reset, with data erase
Click to expand...
Click to collapse
are you going to help me out
jazzy ╰_╯ said:
i was on condition 2 i formated the phone as you said and downloaded twrp back up when i restored the back the first boot took me to erecovery then i try to go to twrp but it was gone i booted into fastboot and saw that phone is locked frp is lock stuck with bootloop ( which boots up my device to erecovery again and again) i do have an indian varient and was already on mm it was just that i had rooted device with magisk where i was not able to pass safenet so i thought to unroot it to stock and reroot again
---------- Post added at 01:52 AM ---------- Previous post was at 01:51 AM ----------
already tried nothing happen
Click to expand...
Click to collapse
Got it repaired by service center even though I want to do it by myself
jazzy ╰_╯ said:
Got it repaired by service center even though I want to do it by myself
Click to expand...
Click to collapse
Yikes. Is yours an Indian Honor 8 pro ?
jazzy ╰_╯ said:
Got it repaired by service center even though I want to do it by myself
Click to expand...
Click to collapse
Yikes. Is yours an Indian Honor 8 pro ?
I am stuck with condition 3. I have flashed project treble, but i wanted to revert back to stock so flashed stock ramdisk.img and my phone is showing phone unlock and frp lock. i can boot into the treble rr rom, but i want to revert back to stock emui. what should i do?
rhijuloves said:
I am stuck with condition 3. I have flashed project treble, but i wanted to revert back to stock so flashed stock ramdisk.img and my phone is showing phone unlock and frp lock. i can boot into the treble rr rom, but i want to revert back to stock emui. what should i do?
Click to expand...
Click to collapse
First thing, go to developer options and enable oem unlocking.. DO NOT FLASH/ DO ANYTHING BEFORE THIS STEP. Then you'll be on condition 1 so you can follow those steps.
Anirudh A said:
First thing, go to developer options and enable oem unlocking.. DO NOT FLASH/ DO ANYTHING BEFORE THIS STEP. Then you'll be on condition 1 so you can follow those steps.
Click to expand...
Click to collapse
can't change oem unlocking, it says bootloader unlocked. Kindly help me.
rhijuloves said:
can't change oem unlocking, it says bootloader unlocked. Kindly help me.
Click to expand...
Click to collapse
Bootloader and frp unlock are different and are independent of each other.Turn on your internet/connect to one and then try oem unlocking. Also, share the screenshot of the oem unlock screen.
Hello everyone, have been a long time
I have a VNS-L21 (P9 Lite 2016) from Colombia, it worked fine but I started to get more and more ads over the time so I decided to unlock the bootloader and root it, and I did it, after almost a year of working just fine, the phone start to restart by itself with no reason around 1 or 2 days per month, they were not scheduled or something.
Last night the phone started to restart by itself again, but this time after it turned on completely it went off some minutes later and started to restart several times without reason, I got frustrated so I decided to uninstall root (thought it was the problem) but the problem was still there, turn on and after some minutes it went off and restart.
Then I decided to check for updates and it had a pending update so I chose to install it but after restart, it won’t come on and kept in an endless boot loop.
Can anyone help me and tell me what to do? Thanks in advance...
fr4nk32 said:
Hello everyone, have been a long time
I have a VNS-L21 (P9 Lite 2016) from Colombia, it worked fine but I started to get more and more ads over the time so I decided to unlock the bootloader and root it, and I did it, after almost a year of working just fine, the phone start to restart by itself with no reason around 1 or 2 days per month, they were not scheduled or something.
Last night the phone started to restart by itself again, but this time after it turned on completely it went off some minutes later and started to restart several times without reason, I got frustrated so I decided to uninstall root (thought it was the problem) but the problem was still there, turn on and after some minutes it went off and restart.
Then I decided to check for updates and it had a pending update so I chose to install it but after restart, it won’t come on and kept in an endless boot loop.
Can anyone help me and tell me what to do? Thanks in advance...
Click to expand...
Click to collapse
Hello,
I bet that along with the root you also had a custom recovery.
So if before you install the update you have re-flashed the stock recovery, simply hold vol + and power button until it restarts in e-recovery mode. At this point make a factory reset and wipe cache.
Reboot system, done.
If instead you have not reinstalled the stock recovery, download one for the system you use (android 6 or 7) and install it via fastboot. ( you can download a rom the same version you use and extract recovery with extractor.
There are two recovery.img in the rom, just take recovery, NOT recovery2 ).
Try to reboot with vol + and power until you turn it on,
then factory reset in custom recovery.
Reboot in fastboot mode, install stock recovery, reboot system and launch again the update.
Happy holidays and good luck
Dadditz said:
Hello,
I bet that along with the root you also had a custom recovery.
So if before you install the update you have re-flashed the stock recovery, simply hold vol + and power button until it restarts in e-recovery mode. At this point make a factory reset and wipe cache.
Reboot system, done.
If instead you have not reinstalled the stock recovery, download one for the system you use (android 6 or 7) and install it via fastboot. ( you can download a rom the same version you use and extract recovery with extractor.
There are two recovery.img in the rom, just take recovery, NOT recovery2 ).
Try to reboot with vol + and power until you turn it on,
then factory reset in custom recovery.
Reboot in fastboot mode, install stock recovery, reboot system and launch again the update.
Happy holidays and good luck
Click to expand...
Click to collapse
Hello, thanks for answer
Yes, I still have the custom recovery and I was using nougat, where can I find an stock recovery for nougat? I wasn't able to use firmware finder (didn't understand how to use it).. does the recovery in rollback package works for this? just asking...
or can someone provide an stock rom compatible with my phone?
sorry for my bad engish and my little knowledge of all this, thanks in advance.
fr4nk32 said:
Hello, thanks for answer
Yes, I still have the custom recovery and I was using nougat, where can I find an stock recovery for nougat? I wasn't able to use firmware finder (didn't understand how to use it).. does the recovery in rollback package works for this? just asking...
or can someone provide an stock rom compatible with my phone?
sorry for my bad engish and my little knowledge of all this, thanks in advance.
Click to expand...
Click to collapse
No worries dude my english is very bad too......
So, you're in nougat L21, but what is your complete firmware ? (example L21C432B504)
Then download from official THREAD Firmware Finder for PC and unzip in a folder on your desktop.
Launch FF and go to COMMON BASE tab.
Type your complete firmware into search space and click on the search button...
Find FULL OTA MF firmware, tap on FILELIST tab, a pop up will appear...
Select the whole link of ONLY update.zip and copy/past into your browser for download...
Once downloaded, unzip to a folder on your desktop.
Download Huawei Update Extractor you find here on XDA...
Launch HUE and select UPDATE.APP you find into folder you just unzipped from upadate.zip...
Now you'll see two recovery, just select recovery.img and with mouse's* right key extract somewere on your desktop...
Done dude you have stock recovery....
Copy that .img recovery into your adb/fastboot folder (very important) and reboot in fastboot mode.
If you don't have adb/fastboot just download here from XDA..
From PC with terminal launch "fastboot flash recovery
(name.of.recovery).img" and recovery will be flashed.
Now you have stock recovery and can make stock ota update correctly.
Hope all will take right way, feel free to ask.
Good luck :fingers-crossed:
edit: * added
Dadditz said:
No worries dude my english is very bad too......
So, you're in nougat L21, but what is your complete firmware ? (example L21C432B504)
Then download from official THREAD Firmware Finder for PC and unzip in a folder on your desktop.
Launch FF and go to COMMON BASE tab.
Type your complete firmware into search space and click on the search button...
Find FULL OTA MF firmware, tap on FILELIST tab, a pop up will appear...
Select the whole link of ONLY update.zip and copy/past into your browser for download...
Once downloaded, unzip to a folder on your desktop.
Download Huawei Update Extractor you find here on XDA...
Launch HUE and select UPDATE.APP you find into folder you just unzipped from upadate.zip...
Now you'll see two recovery, just select recovery.img and with mouse's* right key extract somewere on your desktop...
Done dude you have stock recovery....
Copy that .img recovery into your adb/fastboot folder (very important) and reboot in fastboot mode.
If you don't have adb/fastboot just download here from XDA..
From PC with terminal launch "fastboot flash recovery.img" and recovery will be flashed.
Now you have stock recovery and can make stock ota update correctly.
Hope all will take right way, feel free to ask.
Good luck :fingers-crossed:
edit: * added
Click to expand...
Click to collapse
Hello again
thanks for your help, your guide is really useful
One more thing (excuse me for my little knowledge about this) I don't know what's the exact firmware for my phone, I mean I know it is VNS-L21 and should end B3xx but don't know which C... (I didn't check before the cellphone started to bootloop).
I search around the web and found some recommend the C432 one so I download the update.zip from it, would it have any problem if I flash the recovery from there?
And last thing, Can I flash recovery with P9 lite Toolkit? or just through adb? thanks in advance.
fr4nk32 said:
Hello again
thanks for your help, your guide is really useful
One more thing (excuse me for my little knowledge about this) I don't know what's the exact firmware for my phone, I mean I know it is VNS-L21 and should end B3xx but don't know which C... (I didn't check before the cellphone started to bootloop).
I search around the web and found some recommend the C432 one so I download the update.zip from it, would it have any problem if I flash the recovery from there?
And last thing, Can I flash recovery with P9 lite Toolkit? or just through adb? thanks in advance.
Click to expand...
Click to collapse
Dude at this step how can you tell you were on nougat ?
Is your device branded / unbranded one ?
I searched for Colombia firmware and L21 device don't exist, please check behind the cover,
it's wrote at the bottom. ( maybe L23 one ? )
Try to someway backup your stuff then
reboot with vol+ and power button to recovery, tap WIPE then SWIPE to factory reset.
If boot correctly see inside wich is your complete firmware.
C432 are for european area devices, teoratically should work, but will not risk...
Recovery.img can be easily be flashed with toolkit, i used it a lot of times...
Dadditz said:
Dude at this step how can you tell you were on nougat ?
Is your device branded / unbranded one ?
I searched for Colombia firmware and L21 device don't exist, please check behind the cover,
it's wrote at the bottom. ( maybe L23 one ? )
Try to someway backup your stuff then
reboot with vol+ and power button to recovery, tap WIPE then SWIPE to factory reset.
If boot correctly see inside wich is your complete firmware.
C432 are for european area devices, teoratically should work, but will not risk...
Recovery.img can be easily be flashed with toolkit, i used it a lot of times...
Click to expand...
Click to collapse
Hey dude
You really know about this, I'm sure because I updated the phone to Nougat before unlock and root it, time after an update came but I ignore it (I know it was a security updated not sure which one).
Yes, I just checked my phone in the backpart and it is L23, my bad, when you say branded it means if it is related to a phone/internet company? No, it is not tied to any company, I bought it free from internet.
I really don't care about backing up, if it starts from zero or is back to previous stage is fine for me since it can turn on and use it .
Cheers!
fr4nk32 said:
Hey dude
You really know about this, I'm sure because I updated the phone to Nougat before unlock and root it, time after an update came but I ignore it (I know it was a security updated not sure which one).
Yes, I just checked my phone in the backpart and it is L23, my bad, when you say branded it means if it is related to a phone/internet company? No, it is not tied to any company, I bought it free from internet.
I really don't care about backing up, if it starts from zero or is back to previous stage is fine for me since it can turn on and use it .
Cheers!
Click to expand...
Click to collapse
OK, since from first time i saw this post i thinked was a hardware problem, hope no....
You have to reboot to recovery holding vol+ and power button until a recovery will appear.
Then make a factory reset as already wrote in previous post.
Dadditz said:
OK, since from first time i saw this post i thinked was a hardware problem, hope no....
You have to reboot to recovery holding vol+ and power button until a recovery will appear.
Then make a factory reset as already wrote in previous post.
Click to expand...
Click to collapse
Hi there
Sorry for the late reply...
I managed to turn on the phone updating it through dload method (installing stock kernel and trying to update it with erecovery didn't work) without your help I wouldn't know how to to download the right firmware for my phone. Now, my phone is working "properly".
BUT my phone show a new update, when I tried to install it, it says "your device fail verification and may not work properly" and won't install the update, after that if I reboot the phone it will show your device... sign in red letters and won't turn on without choosing continue (when I was using custom kernel, it will show some letters in orange I think, but will turn on by itself without pressing continue) when I installed the firmware through dload I didn't see that message till I try to update the phone.
Thanks in advance and a very happy new year!.
fr4nk32 said:
Hi there
Sorry for the late reply...
I managed to turn on the phone updating it through dload method (installing stock kernel and trying to update it with erecovery didn't work) without your help I wouldn't know how to to download the right firmware for my phone. Now, my phone is working "properly".
BUT my phone show a new update, when I tried to install it, it says "your device fail verification and may not work properly" and won't install the update, after that if I reboot the phone it will show your device... sign in red letters and won't turn on without choosing continue (when I was using custom kernel, it will show some letters in orange I think, but will turn on by itself without pressing continue) when I installed the firmware through dload I didn't see that message till I try to update the phone.
Thanks in advance and a very happy new year!.
Click to expand...
Click to collapse
Dear forgive me, even for me English it's not my main language and maybe
i did not grab everything you posted. Did you use the dload method?
So you were on EMUI 4 / android 6, but now? If I understand correctly when you turn
on the device, see the red lines and press the power button to boot into the system?
If so, unlock again the bootloader.
If you want to post some screenshots so as to simplify ...
Best regards
Dadditz said:
Dear forgive me, even for me English it's not my main language and maybe
i did not grab everything you posted. Did you use the dload method?
So you were on EMUI 4 / android 6, but now? If I understand correctly when you turn
on the device, see the red lines and press the power button to boot into the system?
If so, unlock again the bootloader.
If you want to post some screenshots so as to simplify ...
Best regards
Click to expand...
Click to collapse
Hi there
I have been so busy these days, and I'm thinking in get another phone.
The red letters are still appearing, I cant install updates and it is driving me crazy.
Yes, i did use dloaad method and it turned on but after that it doesnt install the updates neither through dload method. I'm on EMUI 5, it says the bootloader is already unlocked
here are some pictures....
fr4nk32 said:
Hi there
I have been so busy these days, and I'm thinking in get another phone.
The red letters are still appearing, I cant install updates and it is driving me crazy.
Yes, i did use dloaad method and it turned on but after that it doesnt install the updates neither through dload method. I'm on EMUI 5, it says the bootloader is already unlocked
here are some pictures....
Click to expand...
Click to collapse
Hey dude,
Don't worry about replying soon or late,
we all have our personal stuff to do in our lifes...
You' ve been lucky you don't bricked your device using dload method
on your nougat/android 7 rom version.
This is allowed only to downgrade to a precedent android version (in your case android 6/Marshmallow...)
Even it says your bootloader is unlocked, it isn't, so backup your stuff and unlock it again.
Once unlocked, factory reset will start. When finished do wipe cache too...
Booting into the system will now show yellow (not red) lines and after a bit will automatically boot.
Will take some minutes... ( prepare a coffee )
Set up your phone and look forward for updates...
If all will take right direction, new update will completely lock the bootloader
and at the reboot no yellow or red lines will appears. :fingers-crossed:
Voilà, complete stock with latest firmware.
Take your coffee and enjoy :laugh:
Best regards
P.S.: Remove or obscure the screenshot with imei codes ( it's sensitive datas )
Dadditz said:
Hey dude,
Don't worry about replying soon or late,
we all have our personal stuff to do in our lifes...
You' ve been lucky you don't bricked your device using dload method
on your nougat/android 7 rom version.
This is allowed only to downgrade to a precedent android version (in your case android 6/Marshmallow...)
Even it says your bootloader is unlocked, it isn't, so backup your stuff and unlock it again.
Once unlocked, factory reset will start. When finished do wipe cache too...
Booting into the system will now show yellow (not red) lines and after a bit will automatically boot.
Will take some minutes... ( prepare a coffee )
Set up your phone and look forward for updates...
If all will take right direction, new update will completely lock the bootloader
and at the reboot no yellow or red lines will appears. :fingers-crossed:
Voilà, complete stock with latest firmware.
Take your coffee and enjoy :laugh:
Best regards
P.S.: Remove or obscure the screenshot with imei codes ( it's sensitive datas )
Click to expand...
Click to collapse
Hi there
Hey didn't know about the IMEI codes, already deleted the picture.
I did as you said and my phone is fully stock now (no red or yellow letters) and the ads are back ,anyway thank you so much for your patience and time for helping me out.
I really appreciated your help, take care and see you around. :victory:
fr4nk32 said:
Hi there
Hey didn't know about the IMEI codes, already deleted the picture.
I did as you said and my phone is fully stock now (no red or yellow letters) and the ads are back ,anyway thank you so much for your patience and time for helping me out.
I really appreciated your help, take care and see you around. :victory:
Click to expand...
Click to collapse
Ok i'm glad to see that worked..
I wish to thank in a special way Firmware Finder TEAM that with their
programs gave us the chance to solve many problems, THX guys. :good:
See you
Well, I f*cked up.
Fastboot works, I can flash stock rom via Xiaomi Flash. Flashing completes without any problems. A notification about encypting phone shows up, at 3% it jumps to 100% and resumes boot. Now after each boot, phone freezes at "input your sim pin" and reboots. Over and over again. What can I try, please help :
edited
twister26 said:
There is an reward for whoever helps me solve this issue
Click to expand...
Click to collapse
u try put your sim on other phone and remove the pin from them , maybe the boot skip that part and dont get freeze
dfranco51207 said:
u try put your sim on other phone and remove the pin from them , maybe the boot skip that part and dont get freeze
Click to expand...
Click to collapse
no luck, removed sim and now it reboots as soon as android one text is displayed
I've also tried wiping cache in default recovery, no luck
twister26 said:
no luck, removed sim and now it reboots as soon as android one text is displayed
I've also tried wiping cache in default recovery, no luck
Click to expand...
Click to collapse
Try to format data in twrp or stock recovery.
If it does not work flash an android 8.0 or Nougat ROM. Do not lock the bootloader.
Let me guess. From Pie to Oreo or Nougat?
Mercoory said:
Let me guess. From Pie to Oreo or Nougat?
Click to expand...
Click to collapse
yes, exactly is there a thread already open somewhere here and i missed? last time TWRP was working, I even got a message "your system has been destroyed" or something like that.
sipollo said:
Try to format data in twrp or stock recovery.
If it does not work flash an android 8.0 or Nougat ROM. Do not lock the bootloader.
Click to expand...
Click to collapse
will try!
https://forum.xda-developers.com/mi-a1/how-to/tutorial-downgrade-9-0-to-8-1-edl-imei-t3879624
ccalixtro said:
https://forum.xda-developers.com/mi-a1/how-to/tutorial-downgrade-9-0-to-8-1-edl-imei-t3879624
Click to expand...
Click to collapse
will give it a read, it it works, I'll PM you and you'll give me your paypal address. Fair is fair.
can't unlock OEM, because I can't boot up to developer tools. great, just great. will try to fix that first.
if you can boot to fastboot try to flash stock pie 10.0.4.0 with miflash, after that your device should be able to boot, than unlock OEM and bootloader and downgrade to what version you want
fdc77 said:
if you can boot to fastboot try to flash stock pie 10.0.4.0 with miflash, after that your device should be able to boot, than unlock OEM and bootloader and downgrade to what version you want
Click to expand...
Click to collapse
I can get to fastboot yeah, but MiFlash tool says that remote oem unlock is not allowed. So I'll probably have to open it up for EDL. Reboot to edl isn't working. Thanks for the advice tho.
twister26 said:
I can get to fastboot yeah, but MiFlash tool says that remote oem unlock is not allowed. So I'll probably have to open it up for EDL. Reboot to edl isn't working. Thanks for the advice tho.
Click to expand...
Click to collapse
i had a problem like yours, but i have flashed stock rom in non EDL mode and everything had start to work apart LTE band missing that i restored with qualcomm's tools
which stock rom have you try to flash? are you downgrading from oreo? bootloop on android one logo after downgrading is a common issue due to ARB (anti rollback protection)
twister26 said:
Whoever saves my precious Mi A1 gets 10$ on his paypal.
Click to expand...
Click to collapse
This is ****
This is not XDA spirit
You can get help without to pay
Please cancel the reward, do it. For all the people on this community.
tropbel said:
This is ****
This is not XDA spirit
You can get help without to pay
Please cancel the reward, do it. For all the people on this community.
Click to expand...
Click to collapse
reward is cancelled from this point on i will reward the one who helped me so far tho. still working on solving the problem so winner has not been decided yet.
you don't understand.
There are no winners and no loosers.
You are free to donate to anyone you want, but your post boost and encourages a bad attitude.
If people start to solve only paid problems, the spirit of the community will be destroyed.
The problem is with the Pie specific partition table
I write the whole guide from memory, so it can differ a bit.... I skipped some steps ( erasing, reboot, fastboot mode, TWRP loading via fastboot, OEM unlock )
From previous writings I think you can know the skipped steps.
Keep in mind: It is dangerous, you can loose your IMEI ( it will only work again with Pie - or there are some writings at forum how can you manually change it. ).
Steps:
1 - Backup with TWRP (fastboot) efs,persist,modem & make copy to your computer and or to your cloud provider.
2 - Create a new folder in Internal Storage -> TWRP -> BACKUP -> With a new date directory ( the backup already made one, make a new folder, with different date )
3 - Download someone's older TWRP backup from xda (I cheated, I copied the following links ) :
(I'm still a new user, so can't directly write url's )
Mediafire : https COLON SLASH SLASH bit.ly SLASH 2QU5NtC
Mirror: Google Drive : https COLON SLASH SLASH bit.ly SLASH 2UN1DTo
4 - Unpack, and copy EFS to the folder created 2 point
5 - Fastboot TWRP -> Restore EFS
6 - Flash the Official latest firmware from en.miui.com ( If you want to make sure go with EDL mode )
7 - Now, the IMEI & Mac addresses are missing. Don't panic! Download update with System Updates.
8 - When you are on Pie again, restore your first TWRP (fastboot) persist partition
9 - One more System restore
At this time, you will have IMEI & Mac addressees, and hopefully a working phone.
Hope this helps. The same thing happened with me 2 weeks ago. This is how I solves it.
Thank you, I solved it yesterday. Hopefully this post will come in handy for other people!
Hi, this is my first post here so Hello everyone!
I tried to root P9 lite using below steps:
1. Get unlock code from DC-unlocker.
2. "fastboot oem unlock XXXXXXX..."
3. Phone was reset to factory default sow raw Android 7 was installed.
4. "fastboot boot twrp-3.1.1-0-eva.img" was not working (unknown or forbidden command, don't remember exact message)
5. fastboot flash recovery twrp-3.1.1-0-eva.img
6. After restart with recovery mode still Marshmallow recovery was running so I assumed flash failed.
7. I tried several time put other versions (twrp-3.0.2-0-eva and twrp-3.1.0-0-eva) but if I remember well last one was again installing twrp-3.1.1-0-eva again.
8. As that didn't helped I decided to give up and restore phone to previous state so locked bootloader using SRKToolHuawei-STABLE-V1.3-20160619
9. System restarted and restored to factory default and after running I saw message informing that password is needed to unlock mass storage (or mass memory). There was no onscreen keyboard so no possibility to type anything.
10. Restarted in recovery mode (volume up + power) and tried to recover system from Marshmallow recovery option (using WiFi) but it didn't helped.
11. During next restart I accidentally hold both volume up, down with power so phone tried probably to install system from SSD, but as there was no UPDATE.APP it just stopped at 5%. I left it as it is and after some time (around 5min) phone restarted.
12. Now after restart I see only info that "Your device is booting now...". All key combinations are causing phone restart and same message.
Please advise if there is anything what I can do now.
Will appreciate any help.
After discharging the battery phone started responding properly.
With connected USB cable, volume down and power buttons fastboot&rescue mode is working.
Phone unlocked
FRP unlocked
There is still EMUI recovery in place.
So looks like recovery partition was not replaced and bootloader was not locked again.
I can't tell what is in bootloader now.
System is cleared and can't reinstall it using Marshmallow recovery as it is probably end of maintenance.
My goal is to recover system now and I don't want to root it anymore.
How should I proceed?
JimiLincoln said:
After discharging the battery phone started responding properly.
With connected USB cable, volume down and power buttons fastboot&rescue mode is working.
Phone unlocked
FRP unlocked
There is still EMUI recovery in place.
So looks like recovery partition was not replaced and bootloader was not locked again.
I can't tell what is in bootloader now.
System is cleared and can't reinstall it using Marshmallow recovery as it is probably end of maintenance.
My goal is to recover system now and I don't want to root it anymore.
How should I proceed?
Click to expand...
Click to collapse
Hello,
it seemed that android 7 was your latest working OS.
Can you confirm it ?
If yes what was you complete firmware ?
(example: VNS-L31C432B418/VNS-L21C185B392, etc...)
note: 'EVA' stuff is for P9 variant, not P9 lite..
that's why you f***ed your phone...
Thank you Dadditz for your reply.
Dadditz said:
Hello,
it seemed that android 7 was your latest working OS.
Can you confirm it ?
If yes what was you complete firmware ?
(example: VNS-L31C432B418/VNS-L21C185B392, etc...)
Click to expand...
Click to collapse
It was 7 installed there for sure. And this is VNZ-L21.
Probably latest possible firmware version but can't be sure about this.
Can it be somehow checked now (guess not but not losing hope )?
Dadditz said:
Hello,
note: 'EVA' stuff is for P9 variant, not P9 lite..
that's why you f***ed your phone...
Click to expand...
Click to collapse
I took TWRP from here: twrp.me/huawei/huaweip9.html
When I look at devices list there is not P9 lite here: twrp.me/Devices/Huawei/
Which one should I use then?
P.S. sorry for no links or pictures but as new here I can't add them for now.
EDIT: I found TWRP in SRKToolHuawei-STABLE-V1.3-20160619\recovery\p9\p9.zip\twrpp9mm.img.
Guess I should load this one.
What do you think?
JimiLincoln said:
Thank you Dadditz for your reply.
It was 7 installed there for sure. And this is VNZ-L21.
Probably latest possible firmware version but can't be sure about this.
Can it be somehow checked now (guess not but not losing hope )?
I took TWRP from here: twrp.me/huawei/huaweip9.html
When I look at devices list there is not P9 lite here: twrp.me/Devices/Huawei/
Which one should I use then?
P.S. sorry for no links or pictures but as new here I can't add them for now.
EDIT: I found TWRP in SRKToolHuawei-STABLE-V1.3-20160619\recovery\p9\p9.zip\twrpp9mm.img.
Guess I should load this one.
What do you think?
Click to expand...
Click to collapse
I don't think firmware can be checked now...
Firmware may depend on where you live...
If you live in Europe it can be a branded one
(ex. vodafone: VNS-L21C02B345/6) or unbranded one(VNS-L21C432B505/6).
You cannot flash one of them if you have the other one.
You have to flash an OEMinfo file...
Anyhow you may try a factory reset first and let's hope it will restore the device.
Boot your phone with vol+and power till the e-recovery appear,
do the reset and report back how it went.
P.S.: P9 lite doesn't have an OFFICIAL TWRP.
Available unofficial versions can be founded searching into P9 lite XDA threads.
P.S.2 : A LITTLE SARCASM...
When you tinker with the phone you're not cooking
a plate of spaghetti with tomato sauce.
As you can see bricks are beyond the corner... and not always they can be solved...
Generally it is always better to ask before do, specially
if you don't know what you're doing ... but ... yes,
phone is yours and you can do anything you want...
Dadditz said:
Firmware may depend on where you live...
If you live in Europe it can be a branded one
(ex. vodafone: VNS-L21C02B345/6) or unbranded one(VNS-L21C432B505/6).
You cannot flash one of them if you have the other one.
You have to flash an OEMinfo file...
Click to expand...
Click to collapse
VNS-L21C22B383
Dadditz said:
Anyhow you may try a factory reset first and let's hope it will restore the device.
Click to expand...
Click to collapse
I don't have such option in Huawei eRecovery, only 3 below:
Download latest version and recovery
Reboot
Shutdown
When I used first option and connected trough WiFi I got error "Getting package info failed".
I tried that several times previous days but today this phone again surprised me.
After over 24 hours with discharged battery it became even more responsive (or maybe I just treated it different today).
Today I tried Huawei eRecovery again, it tried to download latest version trough WiFi and "Getting package info failed".
After restart I saw recovery wizard.
Went trough it and I got 7.0 working.
There was no screen keyboard but after recovering backup from HiSuite keyboard is was installed.
I'm also missing some other default android applications like file explorer, mirror, voice recorder, calc.
I'm wondering if it wasn't corrupted during my activities (eg "fastboot flash recovery twrp-3.1.1-0-eva.img").
Dadditz said:
P.S.: P9 lite doesn't have an OFFICIAL TWRP.
Available unofficial versions can be founded searching into P9 lite XDA threads.
Click to expand...
Click to collapse
When I mentioned about SRKToolHuawei-STABLE-V1.3-20160619.zip in my previous post it was one from:
forum.xda-developers.com/huawei-p9lite/how-to/guide-unlock-bootloader-twrp-root-t3405701
Would you recommend it?
Dadditz said:
P.S.2 : A LITTLE SARCASM...
When you tinker with the phone you're not cooking
a plate of spaghetti with tomato sauce.
As you can see bricks are beyond the corner... and not always they can be solved...
Generally it is always better to ask before do, specially
if you don't know what you're doing ... but ... yes,
phone is yours and you can do anything you want...
Click to expand...
Click to collapse
I fully agree with you.
I was searching for many instruction how to do it properly and my mistake was that I stopped fallowing them at point where I tried to installed manually TWRP.
My general conclusion is that even if system was recovered I'm not sure if everything will be ok.
I was totally surprised how my phone reacted during last days so still everything may happen.
I see also some corruption in restored system as some apps are missing.
Any advise how this could be cleaned?
Maybe I should install this system again from some trusted package like from below topic?
forum.xda-developers.com/huawei-p9lite/development/huawei-p9-lite-firmware-compilations-t3517124
What about unlocked bootloader? Should I leave it with annoying screen during phone startup or lock again?
JimiLincoln said:
VNS-L21C22B383
Click to expand...
Click to collapse
This is a good new !!
JimiLincoln said:
I don't have such option in Huawei eRecovery, only 3 below:
Download latest version and recovery
Reboot
Shutdown
When I used first option and connected trough WiFi I got error "Getting package info failed".
I tried that several times previous days but today this phone again surprised me.
After over 24 hours with discharged battery it became even more responsive (or maybe I just treated it different today).
Today I tried Huawei eRecovery again, it tried to download latest version trough WiFi and "Getting package info failed".
After restart I saw recovery wizard.
Went trough it and I got 7.0 working.
There was no screen keyboard but after recovering backup from HiSuite keyboard is was installed.
Click to expand...
Click to collapse
Also a good new !!
JimiLincoln said:
I'm also missing some other default android applications like file explorer, mirror, voice recorder, calc.
I'm wondering if it wasn't corrupted during my activities (eg "fastboot flash recovery twrp-3.1.1-0-eva.img").
Click to expand...
Click to collapse
Yes, surely.
JimiLincoln said:
When I mentioned about SRKToolHuawei-STABLE-V1.3-20160619.zip in my previous post it was one from:
forum.xda-developers.com/huawei-p9lite/how-to/guide-unlock-bootloader-twrp-root-t3405701
Would you recommend it?
Click to expand...
Click to collapse
No, this recovery isn't for nougat (android 7) version.
If you want, you can flash the one you find into HassanMirza01 TWRP thread.
Do not use 3.2.1, instead choose the 3.1.1-1 version, it's the most stable one.
JimiLincoln said:
I fully agree with you.
I was searching for many instruction how to do it properly and my mistake was that I stopped fallowing them at point where I tried to installed manually TWRP.
Click to expand...
Click to collapse
I agree too, it happen when process aren't properly followed...
JimiLincoln said:
My general conclusion is that even if system was recovered I'm not sure if everything will be ok.
I was totally surprised how my phone reacted during last days so still everything may happen.
I see also some corruption in restored system as some apps are missing.
Any advise how this could be cleaned?
Maybe I should install this system again from some trusted package like from below topic?
forum.xda-developers.com/huawei-p9lite/development/huawei-p9-lite-firmware-compilations-t3517124
What about unlocked bootloader? Should I leave it with annoying screen during phone startup or lock again?
Click to expand...
Click to collapse
Dude,
system can be fully recovered, especially now you're sure about
your latest firmware...
There was a thread with a list of stock apps, but it's been closed
because links are dead...
First thing, eliminate all safeties (fingerprints/pattern/pin)(you can add at the end of process)
You should try to reinstall your current firmware using Firmware Finder app,
download it from the big G store. Use dns/vpn method
and choose VNS-L21C22B383 FULLOTA-MF.
Also all info are inside the app. Using this method
the bootloader will be relocked.
If you wont succeed then i can tell you how to use twrp recovery
providing your stock full firmware.
Cheers
Dadditz said:
No, this recovery isn't for nougat (android 7) version.
If you want, you can flash the one you find into HassanMirza01 TWRP thread.
Do not use 3.2.1, instead choose the 3.1.1-1 version, it's the most stable one.
Click to expand...
Click to collapse
Thanks for that info. I will try it in a while when my wife will have new phone.
Dadditz said:
First thing, eliminate all safeties (fingerprints/pattern/pin)(you can add at the end of process)
Click to expand...
Click to collapse
Done
Dadditz said:
You should try to reinstall your current firmware using Firmware Finder app,
download it from the big G store. Use dns/vpn method
and choose VNS-L21C22B383 FULLOTA-MF.
Also all info are inside the app. Using this method
Click to expand...
Click to collapse
I fallowed instructions and choose first VNS-L21C22B383 FULLOTA-MF from the top (each version appear 2 times on this list).
Tried downloading trough DNS but got below message.
"Due to changes in the data exchange protocol between the Huawei server and the device, this function stopped its correct operation, but still works on older software that allows you to upgrade to one of the latest software if it has not already been done."
I tried with all FullOTA-MF versions on the list and same situation for all.
Because no other option I choose Download from last section (Other) and now I have 3 files on my phone:
update.zip
public/update_data_full_public.zip
VNS-L21_polkomtel_pl/update_full_VNS-L21_polkomtel_pl.zip
Should I install them manually?
If yes then how?
Vol+Vol-Power with those files on SD card or by TWRP?
Dadditz said:
the bootloader will be relocked.
If you wont succeed then i can tell you how to use twrp recovery
providing your stock full firmware.
Cheers
Click to expand...
Click to collapse
Many thanks for your help so far! Really appreciate that.
JimiLincoln said:
I fallowed instructions and choose first VNS-L21C22B383 FULLOTA-MF from the top
(each version appear 2 times on this list).
Tried downloading trough DNS but got below message.
"Due to changes in the data exchange protocol between the Huawei server and the device, this function stopped its correct operation, but still works on older software that allows you to upgrade to one of the latest software if it has not already been done."
I tried with all FullOTA-MF versions on the list and same situation for all.
Because no other option I choose Download from last section (Other) and now I have 3 files on my phone:
update.zip
public/update_data_full_public.zip
VNS-L21_polkomtel_pl/update_full_VNS-L21_polkomtel_pl.zip
Should I install them manually?
If yes then how?
Vol+Vol-Power with those files on SD card or by TWRP?
Many thanks for your help so far! Really appreciate that.
Click to expand...
Click to collapse
Dude, sorry if i wrote this.
I'm pretty sure you done everything correct,
but before attempt using the TWRP it's better if you
try again using Firmware Finder this way...
1 - connect to the internet, open the app, accept the disclaimer;
2 - add your complete firmware (add model) - VNS-L21C22B383;
3 - tap on your firmware;
4 - select the one with fullota-mf;
5 - tap check firmware access;
6 - tap check availability, accept disclaimer;
7 - you should have an 'availability of firmware' popup, tap ok;
8 - go back and tap 'get update through dns';
9 - a popup 'alert' you already faced will apper, tap ok;
10 - a new popup 'select dns method' will appear, tap 'auto',
then tap run vpn service and 'accept' the new connection request popup;
11 - you should now have the running vpn service in the notification panel...;
12 - minimize Firmware Finder;
13 - open settings > tap system updater,
you should find the VNS-L21C22B383 update (check multiple times);
14 - tap on it do download and apply the update;
15 - when the download reach 5%, stop the vpn service and continue doing the process...
It's something like THIS VIDEO.
Let me know...
Hi, your directions as well as movie you provided is giving much more details than application itself.
(In below description I had to use links without https as still I don't have enough posts to make them working.)
Dadditz said:
1 - connect to the internet, open the app, accept the disclaimer;
2 - add your complete firmware (add model) - VNS-L21C22B383;
3 - tap on your firmware;
4 - select the one with fullota-mf
5 - tap check firmware access;
6 - tap check availability, accept disclaimer;
7 - you should have an 'availability of firmware' popup, tap ok;
8 - go back and tap 'get update through dns';
9 - a popup 'alert' you already faced will apper, tap ok;
10 - a new popup 'select dns method' will appear, tap 'auto',
then tap run vpn service and 'accept' the new connection request popup;
11 - you should now have the running vpn service in the notification panel...;
12 - minimize Firmware Finder;
Click to expand...
Click to collapse
Done
Dadditz said:
13 - open settings > tap system updater,
you should find the VNS-L21C22B383 update (check multiple times);
Click to expand...
Click to collapse
No such option in my Phone. It looks like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ibb.co/Zf4k0fX
when it should look like this
ibb.co/C0NfpJd
I found it using search menu
ibb.co/SDSYdjR
but when I tap it nothing is happening
Dadditz said:
14 - tap on it do download and apply the update;
15 - when the download reach 5%, stop the vpn service and continue doing the process...
It's something like THIS VIDEO.
Let me know...
Click to expand...
Click to collapse
I wish I could do that
JimiLincoln said:
Hi, your directions as well as movie you provided is giving much more details than application itself.
(In below description I had to use links without https as still I don't have enough posts to make them working.)
Done
No such option in my firmware finder
ibb.co/DYkBGVH
ibb.co/rsNTvdb
so i tried to proceed without checking.
Done
No such option in my Phone. It looks like this
ibb.co/Zf4k0fX
when it should look like this
ibb.co/C0NfpJd
I found it using search menu
ibb.co/SDSYdjR
but when I tap it nothing is happening
I wish I could do that :
Click to expand...
Click to collapse
Thank you for all your feedbacks dude.
Yep, it's clear the firmware is completely f***ed...
Tomorrow i will tell you how to use TWRP
and completely restore the device.
@JimiLincoln
You can restore the exact same rom you had on your smartphone ...
(I'm not sure, it seems it's a sort of firmware branded by vodafone)
but if I can afford, if it were you
i would install the European non-brand version (C432),
without bloatware and should also have the most updated security patch.
Is the phone single or dual sim?
Also, let me know if you want to have all stocks or
have the bootloader unlocked for future manipulations ...
Hello @Dadditz,
Dadditz said:
You can restore the exact same rom you had on your smartphone ...
(I'm not sure, it seems it's a sort of firmware branded by vodafone)
Click to expand...
Click to collapse
It is branded by Polkomtel (plus.pl).
Dadditz said:
but if I can afford, if it were you
i would install the European non-brand version (C432),
Click to expand...
Click to collapse
European non-brand version would be the best.
Dadditz said:
Is the phone single or dual sim?
Click to expand...
Click to collapse
Dual (hybrid)
Dadditz said:
Also, let me know if you want to have all stocks or
have the bootloader unlocked for future manipulations ...
Click to expand...
Click to collapse
I have bootloader unlocked and if future modifications will not erase phone data then we could start with minimal version.
Thanks
JimiLincoln said:
Hello @Dadditz,
It is branded by Polkomtel (plus.pl).
European non-brand version would be the best.
Dual (hybrid)
I have bootloader unlocked and if future modifications will not erase phone data then we could start with minimal version.
Thanks
Click to expand...
Click to collapse
You must use a twrp to rebrand your phone.
Download and flash the one i suggested you (3.1.1-1 by HassanMirza01)
When you done, come back for the files and the guide...
TWRP 3.1.1-1 For P9 Lite by HassanMirza01 installed.
I can enter it only by holding Power + Vol Up without USB connected.
When I hold Power + Vol Up with USB connected Huawei eRecovery is launched.
Is it normal?
JimiLincoln said:
TWRP 3.1.1-1 For P9 Lite by HassanMirza01 installed.
I can enter it only by holding Power + Vol Up without USB connected.
When I hold Power + Vol Up with USB connected Huawei eRecovery is launched.
Is it normal?
Click to expand...
Click to collapse
Yes, normal, you have both
stock and custom recovery now...
Ok, i will post a list of file you have to download:
1 - HuRUpdater04.zip file (will do the job);
2 - L21C432OEMinfo.zip file (dual sim);
THE FIRMWARE:
3 - update.zip ;
4 - update_data_full_public.zip ;
5 - update_full_VNS-L21_hw_eu.zip ;
Let file 3 the same name, rename file 4 from
update_data_full_public TO update_data_public,
rename file 5 from update_full_VNS-L21_hw_eu TO update_all_hw.
Names must mandatory match the ones I wrote to you, otherwise it won't work.
This is the procedure:
Use your PC, make a folder and rename it L21C432B506.
Copy files 3-4-5 (renamed) and HuRUpdater04.zip file into that folder.
(if you want you can keep the TWRP copying the .img file into that folder too).
Copy the folder into the SD.
Copy the OEMinfo file wherever you want into the SD.
Put the SD into the device...
Reboot into recovery and format DATA
(wipe>advanced wipe>tick data and tap format in the bottom right> type 'yes').
Reboot again recovery and wipe everything except SD
(wipe>advanced wipe>tick everything except sd).
Go in main menu, tap install, find and select OEMinfo file, let it flash...
When finished go in main menu and select REBOOT then Bootloader.
Once booted, connect the phone to your PC and
unlock again the bootloader. (quickly disconnect it from PC)
Device should automatically reboot into the recovery otherwise you can do
holding vol + and power button.
Now tap install, find your L21C432B506 folder,
select (only) HuRUpdater04.zip file and let it flash...
Your device should reboot into the system correctly,
if not (if passes over 15 mins) reboot into the e-recovery and
do a factory reset + wipe cache.
Done !!
Hello Dadditz,
Everything installed and working fine
Only bothering thing is message that device was unlocked and can't be trusted.
I will keep this for now as it may be useful at some point.
Many thanks Dadditz for your great help!!!
I will probably come back to this topic when my wife will have new phone, so I will play more with this P9 lite, customize system and learn more.
JimiLincoln said:
Hello Dadditz,
Everything installed and working fine
Only bothering thing is message that device was unlocked and can't be trusted.
I will keep this for now as it may be useful at some point.
Many thanks Dadditz for your great help!!!
I will probably come back to this topic when my wife will have new phone, so I will play more with this P9 lite, customize system and learn more.
Click to expand...
Click to collapse
Amazing polite guy,
i was very pleased to be able to help you, obviously, for what I know ...
It's not a big deal to have that 'annoying' message at boot.
Re-lock the bootloader is the only way to remove it.
You have more than one method:
Flash a previous version of your current firmware
and use Firmware Finder to update to the latest;
or wait untill a new version of your current firmware comes out
and use Firmware Finder to update to;
or use fastboot commands but it's seriously risky;
Keep it as is..
Cheers dude. :highfive:
help
i have a similar problem BUT i can't restart my p9 lite in recovery mode. I tried vol+ & power; vol - & power; vol +, vol - & pwer; only power. The result is always the same: "your device as been unlocked and can't be trusted....... Your device is booting now....". I try also to wait to descharge battery. After descharging, when i connect usb cable to recharge, the smartphone wake on with the same message..... Someone can help me?
Dadditz said:
Amazing polite guy,
i was very pleased to be able to help you, obviously, for what I know ...
It's not a big deal to have that 'annoying' message at boot.
Re-lock the bootloader is the only way to remove it.
You have more than one method:
Flash a previous version of your current firmware
and use Firmware Finder to update to the latest;
or wait untill a new version of your current firmware comes out
and use Firmware Finder to update to;
or use fastboot commands but it's seriously risky;
Keep it as is..
Cheers dude. :highfive:
Click to expand...
Click to collapse
Hello Dadditz,
thank you for your warm words.
I can only comment that still being polite is much easier than spending your private time on helping stranger
Also thanks for warning about locking bootloader by fastboot.