Database Users

HONOR 7 Upgrade problem - reboot with TWRP

Hi,
When I bought my Honor 7 I rooted it, this morning I received the upgrade to new firmware and I selected Install.
The device reloaded in recovery mode, and start TWRP (Chinese version!), I used it when I rooted my phone).
There is no way to start Android, I tryed to select reboot system, but all the time come back TWRP.
someone can help ?

wrong section sorry, it is possible to move the discussion to the correct section ?
sorry

Have you tried going into the EMUI Recovery and press reboot? that did the thing for me.

Rawerz said:
Have you tried going into the EMUI Recovery and press reboot? that did the thing for me.
Click to expand...
Click to collapse
yes I tried, but after the reboot go back to recovery mode

you can not flash an ota update with root and custom recovery. if you search the honor7 forum, you will find dozens topics related to this problem.
for further help, you will have to provide us with more information.

bamserl said:
you can not flash an ota update with root and custom recovery. if you search the honor7 forum, you will find dozens topics related to this problem.
for further help, you will have to provide us with more information.
Click to expand...
Click to collapse
hi bamserl thanks for the answer.
How can I fix?
What information do you need?

I tried a factory rest but the problem still present.
I tried to reinstal TWRP.img but it' useless. :crying:

which fw version was on the phone before the update? which one should it have been afterwards?

Gianluca123 said:
Hi,
When I bought my Honor 7 I rooted it, this morning I received the upgrade to new firmware and I selected Install.
The device reloaded in recovery mode, and start TWRP (Chinese version!), I used it when I rooted my phone).
There is no way to start Android, I tryed to select reboot system, but all the time come back TWRP.
someone can help ?
Click to expand...
Click to collapse
i had the same problem. i fixed it by flashing the stock recovery back on to my device (go into fast boot mode by holding down the power untill its turned off completely hold the volume down button then plugging it into your PC while holing the volume down button then wait till you see a white screen with the android logo)

I think the previews version was PLK-L01C432B121, I don't know the new version but came just 2 days ago

i followed this guide:
http://forum.xda-developers.com/honor-7/general/guide-beginners-how-to-root-update-fix-t3255452 part 5.
now my phone is working
thanks for the help

New Firmware 5.0.0-RU1.1.99

You can find it here: ftp://fw.ydevices.com/YotaPhone2/Firmwares/RU/
Install either via OTA update if you're already on the 1.87 RU ROM like I am. On my device it first wanted to install the update only, about 67MB, but it failed to install; then the next time I checked for updates after reboot through the settings update menu, it downloaded the full file, about 0,99 GB. Then the update went all the way through. SuperSU is lost on the way, I will try if it still works through the recovery installation.
You can also install through Yotaflasher like it's explained here: http://forum.xda-developers.com/showthread.php?t=3247356
Didn't have time to test things out, but it's still Lollipop 5.0, so only bugfixes and some new yotapanel features I guess.
Enjoy!

Thanks for that muchly dude, hadn't checked that for a while.
Update seems to be stability improvements, power efficiency improvements and some yotamirror and panel improvements and features.
Its not 5.1, but it's an update, I'll take it.
And yeah, super glad moved to the RU ROM. Backing up now, will OTA flash update once that's done. SuperSU has been flashable everytime after an update so far so fingers crossed.

All up and running .
I was rooted, running RU 1.87 with TWRP - phone handled it all just fine - downloaded OTA, pressed install - it went to TWRP > flashed stock recovery back over itself > rebooted and installed.
Phone booted up, all working fine. Lost root - simple reboot and flash the SU.zip had sitting there from the last update. Cache and Dalvik wiped for good measure.
Reboot and all is well and back to normal but with a few improvements, lovely.
About as easy as it's even been done really.
Hope everyone else gets to enjoy the update through similarly smooth procedures .

Yeah, I ended up doing a fresh installation plus rooting, everything smooth. I'm never too sure what an update leaves behind.
It's really a great device, hopefully they'll keep updating things for a while. Of course version 6.0 would be welcomed... Apparently, by the numbering they use, next step would be either 1.2.xx with Android 5.1 or 2.x.xx with 6.0. Let's see.

Fair play, I toyed with idea of it, but was fresh from last install and honestly don't have the time to set everything up again.
My hope is they take all their good ideas from this and can at least join someone else in making a great device.
Saw a working bendy phone the other day, lets you turn pages on reading app by bending corner as you would a book etc. I thought if that could be combined with yota tech, then you have damn near the perfect tablet.
Honestly I don't think we'll get 5.1, let alone 6.0. They're refining their ideas in prep for Yotaphone 3, that and the possible tablet are their main focus right now.
Interestingly, the update flashed it's stock recovery over twrp - someone prepared for the possibility of root owners this time around. So they are still paying attention .

So any idea what's the difference between the EU and the RU rom? I mean there has to be some reason they are two separate roms.

To answer my own question: there isn't too many differences between EU and RU roms. I did a diff between the RU1.1.59 and EU1.1.60, and out of 2092 files, roughly 1900 of the files inside system.img were identical. The APKs were slightly different, but only slightly. So probably the difference comes from some differently named resources.
The RU version also has some additional apps which the EU version does not have, such as Esquire, Questions, Strelka and Vector. These are probably the main reason why they have different ROMs. They might only work in Russia.

Jeopardy said:
To answer my own question: there isn't too many differences between EU and RU roms. I did a diff between the RU1.1.59 and EU1.1.60, and out of 2092 files, roughly 1900 of the files inside system.img were identical. The APKs were slightly different, but only slightly. So probably the difference comes from some differently named resources.
The RU version also has some additional apps which the EU version does not have, such as Esquire, Questions, Strelka and Vector. These are probably the main reason why they have different ROMs. They might only work in Russia.
Click to expand...
Click to collapse
FYI the difference is essentially the product package configuration (app bundles that are pre-loaded) but there are also some differences between the resources used for the stock apps. One in particular (my personal fav ) is the dialler - the RU variant includes cyrillic characters regardless of language/locale setting (feature). The EU will give you a regular english-only dialler if you're using english locale settings

Vuche said:
You can find it here: ftp://fw.ydevices.com/YotaPhone2/Firmwares/RU/
Install either via OTA update if you're already on the 1.87 RU ROM like I am. On my device it first wanted to install the update only, about 67MB, but it failed to install; then the next time I checked for updates after reboot through the settings update menu, it downloaded the full file, about 0,99 GB. Then the update went all the way through. SuperSU is lost on the way, I will try if it still works through the recovery installation.
You can also install through Yotaflasher like it's explained here: http://forum.xda-developers.com/showthread.php?t=3247356
Didn't have time to test things out, but it's still Lollipop 5.0, so only bugfixes and some new yotapanel features I guess.
Enjoy!
Click to expand...
Click to collapse
Ho to flash the update zip file? I m stuck on 4.4.3...

does nyone know how to flash the file zip into the phone?? i have no idea how it works and i dont find any infos

Does the new update solve the keyboard sensitivity issue??

zute333 said:
numerous guides and how to's in this forum and across XDA, as well as google.
download fastboot + adb > boot to download mode > flash twrp via fastboot commands > boot into twrp > flash zip.
There's obviously more to it than that, up to you to do the research.
Click to expand...
Click to collapse
i'm using this post as a minimalistic guide for myself (so i keep it up with my "discoveries" )
and ofc for been helped by everyone who wants to help me because i am completely new to android world cause this is my first android phone ever!
so.. let's get started!
i downloaded [TOOL] [WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.3
version 1.4.3 doesnt works for me so i downloaded the 1.3 as suggested and worked.
then i enabled the download mode following the procedure:
Turn off the phone, then press and hold the volume down key + the power key at the same time. This should boot you into download mode.
Click to expand...
Click to collapse
note: phone MUST be disconnected form pc to be turned off.
now..
*does install twrp invalidate warranty?
EDIT: answer is YES cause of
TWRP 2.8.5.0 YotaPhone 2 recovery image said:
Warning: It is currently not known how to re-lock the bootloader. This means you cannot completely undo the next step as of yet. This might have consequences for sending the device in for repairs, if they check for this, and deem it a (warranty) problem
Click to expand...
Click to collapse
*is installing TWRP a mandatory step?
EDIT: the answer is NO. it seems that the mandatory part is to unlock the bootloader (the bad part for the warranty.. and that can erase ur data..) and this can be done following this guide How to Install TWRP Recovery on YotaPhone 2 untill point 6 included - which i am reporting here for easy of use.
How to Install TWRP Recovery on YotaPhone 2 said:
How to Flash TWRP Recovery on YotaPhone 2
1 - Setup ADB and Fastboot on your Windows PC.
2 - Enable USB debugging from developer options on your YotaPhone 2.
3 - Connect it to PC with a USB cable, if it asks for debugging authorization, permit it.
4 - Go to the folder where you downloaded the TWRP recovery image from the download link above on your PC and open a command window inside that folder by doing “Shift + Right click” on any empty white space inside the folder, then select “Open command window here”.
5 - (Skip this if your bootloader is already unlocked) Now to unlock the bootloader, type in the following command:
└ Beware that unlocking the bootloader may wipe your phone’s data. Make sure to backup first before proceeding.
adb reboot bootloader
Click to expand...
Click to collapse
└ This will reboot your phone to bootloader mode
fastboot oem unlock
Click to expand...
Click to collapse
└ This will unlock bootloader on your device.
6 - Now if your phone has rebooted and is no longer in the bootloader mode, then boot it back into bootloader mode with the “adb reboot bootloader” command.
Click to expand...
Click to collapse
i already downloaded yotaflasher and the last RU firmware 5.0.0-RU1.1.99.zip
NOTE: Russian firmware seems to contain English language. i dont know how to change it later to the favorite one.
NOTE: you need to move the firmware files to the same location as the Flasher tool. Default one is C:\Program Files (x86)\yotaphone_flasher
i tryed to use yotaflasher right now while phone is in download mode and it says:
error: cannot open 'firmware/emnc_appsboot.mbn'
error: cannot open 'firmware/boot.img'
error: cannot open 'firmware/system.img'
error: cannot open 'firmware/recovery.img'
error: cannot open 'firmware/cache.img'
error: cannot open 'firmware/radio/NON-HLOS.bin'
error: cannot open 'firmware/radio/sbli.mbn'
error: cannot open 'firmware/radio/rpm.mbn'
error: cannot open 'firmware/radio/tz.mbn'
error: cannot open 'firmware/enmc_appsboots.mbn'
Would you like to flash userdata[Y/N]:
Click to expand...
Click to collapse
EDIT: placing the firmware in the right folder and unzipping ip let me flash my phone without using any bootloader. now i dont know why but is stucked showing android logo.
i dont know if this happened cause i used the last RU firmware on my stock 4.4.3 android or what..
what do i have to do?:crying::crying::crying:
tnx

Hello guys, I downloaded Lollipop from the ftp but installation fails: no MD5 file found!
I downloaded all russian versions and also the 1.6 EU version... but no way I always get this error.
I'm using TWRP 2.8.5, I guess the last one, and in the tutorials I see this version...
Does anyone know how to solve? :crying:

giocorrado said:
does nyone know how to flash the file zip into the phone?? i have no idea how it works and i dont find any infos
Click to expand...
Click to collapse
The info is described in various posts across the yotaphone forum. Are you rooted? If not then there also many many guides across the internet for that.
Not walking you through the whole process, sorry. We all had to learn, once you do it's all much easier.

It happens also to me...don't panic! press Volume up and the power button and when you enter in the bootloader select the downloading options, it will restart the phone with the "downloading" status
in the meanwhile with the yotaflasher select the option to downloads a firmware and try a different one. When the download is finished try to flash once again.

Melting Blaze said:
i already downloaded yotaflasher and the last RU firmware 5.0.0-RU1.1.99.zip
NOTE: Russian firmware seems to contain English language. i dont know how to change it later to the favorite one.
NOTE: you need to move the firmware files to the same location as the Flasher tool. Default one is C:\Program Files (x86)\yotaphone_flasher
i tryed to use yotaflasher right now while phone is in download mode and it says:
EDIT: placing the firmware in the right folder and unzipping ip let me flash my phone without using any bootloader. now i dont know why but is stucked showing android logo.
i dont know if this happened cause i used the last RU firmware on my stock 4.4.3 android or what..
what do i have to do?:crying::crying::crying:
tnx
Click to expand...
Click to collapse
I placed like you the rom downloaded through website in the firmware folder and flash got wrong. I was blocked on "powered by android" logo like you.
After this almost-bricking experience, I flashed 4.4.3 downloaded all through Flasher and phone was working again.
Then I tried to substitute 5.0 system.img in the folder downloaded through Flasher but no way... after flashing phone didn't boot.
I reflashed 4.4.3 back again and now is working.
I think that we can't put files in folder for Yota Flasher...
I cannot download last 5.0 EU version, like described here: http://forum.xda-developers.com/yot...ially-dead-t3312382/post65839167#post65839167

TKPL said:
I placed like you the rom downloaded through website in the firmware folder and flash got wrong. I was blocked on "powered by android" logo like you.
After this almost-bricking experience, I flashed 4.4.3 downloaded all through Flasher and phone was working again.
Then I tried to substitute 5.0 system.img in the folder downloaded through Flasher but no way... after flashing phone didn't boot.
I reflashed 4.4.3 back again and now is working.
I think that we can't put files in folder for Yota Flasher...
I cannot download last 5.0 EU version, like described here: http://forum.xda-developers.com/yot...ially-dead-t3312382/post65839167#post65839167
Click to expand...
Click to collapse
yeah i've done the same.
i founded the trick i hope
after my big mistake i have done this:
*i downloaded the last 4.4.3-S01-003-EU1.0.3.61a.zip then i flashed it. reminding to unzip it and put it in the right folder of the flasher. remind that this will delete ur data too prob.
*i checked for update on the phone in setting--> about phone --> sistem update
*it downloaded lollipop (android 5.0 Lollipop - 1Gb to download) :laugh:
*i took the 5.0.0-RU1.1.99.zip and flashed it
*u can choose english when the phone boot so dont worry about firmware to be RU
*i checked the firmware version doing the combo "Volume up and the power button" (press it while restarting)
*i changed the language of the phone in setting --> language (there is plenty of languages to choose. i choose mine, italian, but sometimes it happens to find something in english )
i downladed some app etc etc but i never used it for calls cause of the requested nano sim that i'm going to take tomorrow probably cause today i get stucked with trouble about my contacts.
hope to solve the problem for pass my contacts form my nokia N8 to yotaphone 2 quickly!
please let me know if it works for u too
JAMMANDROID said:
It happens also to me...don't panic! press Volume up and the power button and when you enter in the bootloader select the downloading options, it will restart the phone with the "downloading" status in the meanwhile with the yotaflasher select the option to downloads a firmware and try a different one. When the download is finished try to flash once again.
Click to expand...
Click to collapse
yeah. is exactly what i did, but super panicing like a chicken without head

Melting Blaze said:
yeah i've done the same.
i founded the trick i hope
after my big mistake i have done this:
*i downloaded the last 4.4.3-S01-003-EU1.0.3.61a.zip then i flashed it. reminding to unzip it and put it in the right folder of the flasher. remind that this will delete ur data too prob.
*i checked for update on the phone in setting--> about phone --> sistem update
*it downloaded lollipop (android 5.0 Lollipop - 1Gb to download) :laugh:
*i took the 5.0.0-RU1.1.99.zip and flashed it
*u can choose english when the phone boot so dont worry about firmware to be RU
*i checked the firmware version doing the combo "Volume up and the power button" (press it while restarting)
*i changed the language of the phone in setting --> language (there is plenty of languages to choose. i choose mine, italian, but sometimes it happens to find something in english )
i downladed some app etc etc but i never used it for calls cause of the requested nano sim that i'm going to take tomorrow probably cause today i get stucked with trouble about my contacts.
hope to solve the problem for pass my contacts form my nokia N8 to yotaphone 2 quickly!
please let me know if it works for u too
yeah. is exactly what i did, but super panicing like a chicken without head
Click to expand...
Click to collapse
I saw also an update this morning at home on wifi (I wait for the SIM too) because yesterday I flashed the 4.4.3-S01-003-EU1.0.51a: is not the 61 like yours and I received an update alert to 4.4.3-S01-003-EU1.0.3.56. I'm at work, I'll try this evening.
I haven't updated this morning because I was downloading a previous 5.0, the EU 1.44, but when flashing I had error "cannot load firmware/system.img". So I reflashed 4.4.3... I'll try again this evening

giocorrado said:
does nyone know how to flash the file zip into the phone?? i have no idea how it works and i dont find any infos
Click to expand...
Click to collapse
Hi, download YotaFlasher, it permits you to download and flash firmwares in an easy way, and you don't need to know any shell command
---------- Post added at 09:37 AM ---------- Previous post was at 09:25 AM ----------
giocorrado said:
does nyone know how to flash the file zip into the phone?? i have no idea how it works and i dont find any infos
Click to expand...
Click to collapse
TKPL said:
I saw also an update this morning at home on wifi (I wait for the SIM too) because yesterday I flashed the 4.4.3-S01-003-EU1.0.51a: is not the 61 like yours and I received an update alert to 4.4.3-S01-003-EU1.0.3.56. I'm at work, I'll try this evening.
I haven't updated this morning because I was downloading a previous 5.0, the EU 1.44, but when flashing I had error "cannot load firmware/system.img". So I reflashed 4.4.3... I'll try again this evening
Click to expand...
Click to collapse
Hello! I have 5.0!
After flashing and old version of 4.4.3 (my phone went with a 4.4.something branded Vodafone Italy, and they evidently don't give a fork about updates). With the 4.4.3 rev 1.0.51a I immediately received he update to 1.0.56a: I downloaded the 114MB, rebooted, and then got the update to 1.0.61a, around 63MB. I rebooted and then got finally the update to 5.0, 1GB :laugh:
I have only one problem now: the device doesn't recognize when I'm looking at the ink screen, and power button powers on the amoled... Even unlocking through swiping from bottom to top doesn't work. Option is correctly set, I tried to uncheck, reboot, wipe cache and check the option again but it not working well yet.

I have only one problem now: the device doesn't recognize when I'm looking at the ink screen, and power button powers on the amoled... Even unlocking through swiping from bottom to top doesn't work. Option is correctly set, I tried to uncheck, reboot, wipe cache and check the option again but it not working well yet.
Click to expand...
Click to collapse
seems that is the same for a lot of people if not everyone..
cause of this problem i am using this app gravity screen on/off.
it halves the problem cause now i have no problem for the amoled. and for problem i mean use the pwer button instead of simply swipe.
for the e-ink panel i still have to use the power button, only way it works.

P8 Lite strange brick

Hello i'm a new user of this forum and i'm italian so sorry for my bad english. I'm an enthusiast android user.
now i have a perfectly working p9 lite but 1 year ago i had bricked my old p8 lite and today i returned to work on it but the problem are the same as before.
1 year ago the android 5 lollipop was the latest for the p8 lite and i rooted with no problem with random root application unfortunally maybe kingroot...... but all was ok for months. after i updated my p8 lite to android 6 mm and i tried to root, after many tryes i sucsessfull root my device, but the xda framework didnt work at all at that time the mm version was too new. so i tried to rollback to android 5, but i didn t know about a correct rollback update, so i flashed android 5's boot, cust, recovery and system.img via fastboot. i saw that the sim didn't recognised and so i discovered that the imei was lost........ And believe it or not, this is not entirely the problem.... after that i was in panic and i went to assistance and there they tell me that the motherboard was to replace.... so for the cost of the entire phone i decided to not pay. after i tried to follow so many guides my friend, you not even any ideas.... but one guide seems to work, i had to flash b049 or b52 (don not remember) and after my b190 but at the b49/b52 it give balong problem, after i fixed with a vendor little flash but the imei was completely gone in every versions..... i was sad... but while a flash and another thi biggest problem born.......... the phone bootloop, but NOT a normal bootloop, it starts correctly every versions but after 10 seconds of a working os ( i can go in settings, start application ec but it give up and restart totally not explayned.... i've formatted 1000 times and the force update fail or bootloop itself at 10 or 11% (10seconds....) same with recovery... only in rescue/fastboot mode it do not restart after 10 seconds and in the twrp 3.0.2 that i tried to flash every modded firmware in zip and at system flash it restart (seems like the 10 second stuff). now the imei problem is not a request because now i've the p9 lite and i dont need the phone things but the system.... its unplayble with the 10 secodns restart loop.... please is hard but HELP.

Franseven said:
Hello i'm a new user of this forum and i'm italian so sorry for my bad english. I'm an enthusiast android user.
now i have a perfectly working p9 lite but 1 year ago i had bricked my old p8 lite and today i returned to work on it but the problem are the same as before.
1 year ago the android 5 lollipop was the latest for the p8 lite and i rooted with no problem with random root application unfortunally maybe kingroot...... but all was ok for months. after i updated my p8 lite to android 6 mm and i tried to root, after many tryes i sucsessfull root my device, but the xda framework didnt work at all at that time the mm version was too new. so i tried to rollback to android 5, but i didn t know about a correct rollback update, so i flashed android 5's boot, cust, recovery and system.img via fastboot. i saw that the sim didn't recognised and so i discovered that the imei was lost........ And believe it or not, this is not entirely the problem.... after that i was in panic and i went to assistance and there they tell me that the motherboard was to replace.... so for the cost of the entire phone i decided to not pay. after i tried to follow so many guides my friend, you not even any ideas.... but one guide seems to work, i had to flash b049 or b52 (don not remember) and after my b190 but at the b49/b52 it give balong problem, after i fixed with a vendor little flash but the imei was completely gone in every versions..... i was sad... but while a flash and another thi biggest problem born.......... the phone bootloop, but NOT a normal bootloop, it starts correctly every versions but after 10 seconds of a working os ( i can go in settings, start application ec but it give up and restart totally not explayned.... i've formatted 1000 times and the force update fail or bootloop itself at 10 or 11% (10seconds....) same with recovery... only in rescue/fastboot mode it do not restart after 10 seconds and in the twrp 3.0.2 that i tried to flash every modded firmware in zip and at system flash it restart (seems like the 10 second stuff). now the imei problem is not a request because now i've the p9 lite and i dont need the phone things but the system.... its unplayble with the 10 secodns restart loop.... please is hard but HELP.
Click to expand...
Click to collapse
Do you have access to rescue mode/fastboot? Maybe flashing TWRP would help
P.S.-- DON'T EVER RUN KINGROOT ON P8LITE; MAYBE IT WILL SUCCESS, BUT YOUR DEVICE WILL BE MESSED UP

XTutorials said:
Do you have access to rescue mode/fastboot? Maybe flashing TWRP would help
Click to expand...
Click to collapse
yes, Maybe I was not clear but rescue mode is the only one where no automatic restart occurs. I twrp it and tried it but it did not help. If you are expert please give me more advice

Franseven said:
yes, Maybe I was not clear but rescue mode is the only one where no automatic restart occurs. I twrp it and tried it but it did not help. If you are expert please give me more advice
Click to expand...
Click to collapse
I have some questions:
1. What means"I twrp it" ? I know you're italian but please more details; did you flashed it succesfully?
More, I want a response to this question first

XTutorials said:
I have some questions:
1. What means"I twrp it" ? I know you're italian but please more details; did you flashed it succesfully?
More, I want a response to this question first
Click to expand...
Click to collapse
I successfully flashed the twrp recovery and trying to flash the zip while the firmware reboots while flashing the system

Franseven said:
I successfully flashed the twrp recovery and trying to flash the zip while the firmware reboots while flashing the system
Click to expand...
Click to collapse
Try here it might work

cristi.blidariu said:
Try here it might work
Click to expand...
Click to collapse
in fastboot mode hicare don't see my device, If you think that this particular version b132 changes something I try but I think it will restart every 10 seconds as the others ..

Franseven said:
I successfully flashed the twrp recovery and trying to flash the zip while the firmware reboots while flashing the system
Click to expand...
Click to collapse
For this fix, you should have and sd card
Download sokkoban's emui 4.0.3 B596, copy to sd card, erase everything in TWRP (cache, dalvik, data, system, internal storage), then flash the .zip you copied to the sd card.

XTutorials said:
For this fix, you should have and sd card
Download sokkoban's emui 4.0.3 B596, copy to sd card, erase everything in TWRP (cache, dalvik, data, system, internal storage), then flash the .zip you copied to the sd card.
Click to expand...
Click to collapse
Also by deleting everything in the twrp recovery the other .zip phones will restart as twrp is copying system, with b596 should not happen?

Franseven said:
Also by deleting everything in the twrp recovery the other .zip phones will restart as twrp is copying system, with b596 should not happen?
Click to expand...
Click to collapse
Maybe, try

XTutorials said:
Maybe, try
Click to expand...
Click to collapse
nope.. i've tried right now and it do same thing

Franseven said:
nope.. i've tried right now and it do same thing
Click to expand...
Click to collapse
Try to erase everything in twrp -->>advanced wipe-->> tick everything and click wipe.
Then flash latest TWRP (3.1.0-1) And try again flashing B596

XTutorials said:
Try to erase everything in twrp -->>advanced wipe-->> tick everything and click wipe.
Then flash latest TWRP (3.1.0-1) And try again flashing B596
Click to expand...
Click to collapse
ok done.
install zip
successful
but down i see
E:unknown command [errno]
dalvik wiped
now reboot
and....splash logo ok...reboot.......splash... again.. yes bootloop, but now seems normal
my initiative , i m going to hard resetnow
factory reset done
reboot
bootloop again my friend.
EDIT:
tried again, after 3 bootloop emui show to load but restart again. after that emui load and while the language selection it shutdown automatically, this time don't restart. we see tomorrow

Franseven said:
ok done.
install zip
successful
but down i see
E:unknown command [errno]
dalvik wiped
now reboot
and....splash logo ok...reboot.......splash... again.. yes bootloop, but now seems normal
my initiative , i m going to hard resetnow
factory reset done
reboot
bootloop again my friend.
EDIT:
tried again, after 3 bootloop emui show to load but restart again. after that emui load and while the language selection it shutdown automatically, this time don't restart. we see tomorrow
Click to expand...
Click to collapse
Oh my god.... that error is just a log, everything works, don't panic so again.
Go to twrp-- wipe-- advanced wipe-- tick(check) all and clikc wipe
reflash twrp 3.1.0-1,
flash again zip, and don't care about that error, that means it succesfully flashed the rom

XTutorials said:
Oh my god.... that error is just a log, everything works, don't panic so again.
Go to twrp-- wipe-- advanced wipe-- tick(check) all and clikc wipe
reflash twrp 3.1.0-1,
flash again zip, and don't care about that error, that means it succesfully flashed the rom
Click to expand...
Click to collapse
i've done what your saying, and the result is that when the device reach the boot logo starts a sort of timer, and after 10 seconds the os crash in every case with every firmware... thats not help

Franseven said:
i've done what your saying, and the result is that when the device reach the boot logo starts a sort of timer, and after 10 seconds the os crash in every case with every firmware... thats not help
Click to expand...
Click to collapse
Then I'm done... I don't know man other fixes. I've read os kinda same type of hard brick that if you disconnect the battery and plug it in back does something

XTutorials said:
Then I'm done... I don't know man other fixes. I've read os kinda same type of hard brick that if you disconnect the battery and plug it in back does something
Click to expand...
Click to collapse
in the p8 lite the battery is unremovible, i must try with deassemble tutorial?
but have you ear of this type of bootloop? with this strange timer crash?
EDIT:
i just followed a guide for battery sostitution, i've unplagged and replugged and the "timer boot loop/ os timer crash" continue.
now i m trying to unplug for 5 mins to do safe.
Ok done. same bad result.. please if you can't help, make this post still alive invite if you have expert friend, i'm going mad.

I think it's problem with the hardware, that the power button pressed continuously.
Because in our phone if you keep pressing it for 10 seconds it will force restart.
Actually I don't know about twrp flashing problem, if it also do the same or not...
you may check the power button..

salembream said:
I think it's problem with the hardware, that the power button pressed continuously.
Because in our phone if you keep pressing it for 10 seconds it will force restart.
Actually I don't know about twrp flashing problem, if it also do the same or not...
you may check the power button..
Click to expand...
Click to collapse
oh i thought that... i can try to dissassemble but i hope to not damage the device..
wait a minute... but when i click the power button i can hear sonor "clak" don't seems to be pressed costantly..
EDIT:
its definetely not a power button problem, i dissassembled, i replug the battery, so pressed power button, while booting i unplugged the contact of the power button and volume +- so i cant even seems pressed. same happened after 10 seconds it restart. sorry bad english

Brick, Elite Rom, stock, and brick again...

Hy everyone, i have an VNS-L23 Argentina Huawei, about a week ago i installed the Elite Rom with no problem, but it had some 4g problems, so yesterday i wanted to back to stock, and there all begin, i follow the steps to back to stock but it bricked i dont know why. i solved it with dload mode and a stock 6.0 rom global for latinoamerica (VNS-L23C605B120). In that rom i cant update to nougat and fingerprint doesnt work.
I googled and i found a ´´p9 lite B150 Nougat Stock Firmware VNS-l23 Argentina Version Personal´´(VNS-L23C110B150) and i tried to install it, now i have a black screen always i turn on and all the update.app i tried dont work, do the error ´´incompatibility with current version please download the correct update package´´. Bootloader unlocked but frp locked and i cant do anything in flashboot because of that. Also i lost TWRP. Can a technic solve this?
Thanks and please give me help, greetings from Argentina.

Hello,
you have been able to dload one time,
then do It again..
Wait wait... damn It.... why you flashed
firmware with different cust ??
( u flashed c110 over c605 )...
That's the reason you bricked It...
Damn It bootloader unlocked, FRP locked...
that's not a good situation...
Take a look onto those threads and
if cannot escape bring your phone to assistance:fingers-crossed:
https://forum.xda-developers.com/huawei-p9lite/how-to/unified-help-thread-huawei-p9-lite-t3649152
https://forum.xda-developers.com/hu...ution-bl-unlockedfrp-locked-fastboot-t3684302
Best Regards

Dadditz said:
Hello,
you have been able to dload one time,
then do It again..
Wait wait... damn It.... why you flashed
firmware with different cust ??
( u flashed c110 over c605 )...
That's the reason you bricked It...
Damn It bootloader unlocked, FRP locked...
that's not a good situation...
Take a look onto those threads and
if cannot escape bring your phone to assistance:fingers-crossed:
https://forum.xda-developers.com/huawei-p9lite/how-to/unified-help-thread-huawei-p9-lite-t3649152
https://forum.xda-developers.com/hu...ution-bl-unlockedfrp-locked-fastboot-t3684302
Best Regards
Click to expand...
Click to collapse
Hi, thx for answer i tried everything and nothing, so today i will take the phone to assistance, that i dont know what firware or update should i install because VNS-L23C605B120 full ota dont work anymore because compatibility, and the thing can i install is the same update file of 222mb of VNS-L23C110B150, if i install the full ota of this device, it will at least install and boot?

yaco96 said:
Hi, thx for answer i tried everything and nothing, so today i will take the phone to assistance, that i dont know what firware or update should i install because VNS-L23C605B120 full ota dont work anymore because compatibility, and the thing can i install is the same update file of 222mb of VNS-L23C110B150, if i install the full ota of this device, it will at least install and boot?
Click to expand...
Click to collapse
Hello,
try this before u bring phone to assistance..
Check if TWRP work for you, and if you donot have then install one for your version firmware then put in SD the files in links...
Reboot recovery and flash oeminfo.zip.
When finished turn off the phone and reboot with vol up+vol down+power buttons until flash starts...
When finished reboot to e-recovery (vol up+power button) and make a factory reset.. That' all...
Wish you the best..
OEMINFO
https://mega.nz/#!EBtDyDZa!1_D0FnisbuMXk50wi3Sm0gdoF9RPgEXpceAbxTASK0g
ROM
https://mega.nz/#!ZY0U3DYQ!MiBkJmkCaBTz6bcJ-Ij3z_PMEpbmhFmsT7865pTUW50

Hi!, I have the same problem with the same version. I tried to flash the version VNS-L23C605B120 through dload on sdcard, but it said the same "incompatible with de current version" when it arrive to 5%. I can't enter on fastboot mode too, so i don't know what is going on. Could you give some trick to try?.
Thanks in advange.

mboscovich said:
Hi!, I have the same problem with the same version. I tried to flash the version VNS-L23C605B120 through dload on sdcard, but it said the same "incompatible with de current version" when it arrive to 5%. I can't enter on fastboot mode too, so i don't know what is going on. Could you give some trick to try?.
Thanks in advange.
Click to expand...
Click to collapse
Hey i dont know if i can help,
explain the problem as better as you can.

Yeeeeah, if you ask me Elite rom is simply bad. Yes, it is fast and etc, but if i have to pay for some features then that is a BIG NO.
Why you want to flash Elite rom though? Half of the mods barely work and it is no different from the stock EMUI.

Huawei P9 lite not starting

Hi, this is my first post here so Hello everyone!
I tried to root P9 lite using below steps:
1. Get unlock code from DC-unlocker.
2. "fastboot oem unlock XXXXXXX..."
3. Phone was reset to factory default sow raw Android 7 was installed.
4. "fastboot boot twrp-3.1.1-0-eva.img" was not working (unknown or forbidden command, don't remember exact message)
5. fastboot flash recovery twrp-3.1.1-0-eva.img
6. After restart with recovery mode still Marshmallow recovery was running so I assumed flash failed.
7. I tried several time put other versions (twrp-3.0.2-0-eva and twrp-3.1.0-0-eva) but if I remember well last one was again installing twrp-3.1.1-0-eva again.
8. As that didn't helped I decided to give up and restore phone to previous state so locked bootloader using SRKToolHuawei-STABLE-V1.3-20160619
9. System restarted and restored to factory default and after running I saw message informing that password is needed to unlock mass storage (or mass memory). There was no onscreen keyboard so no possibility to type anything.
10. Restarted in recovery mode (volume up + power) and tried to recover system from Marshmallow recovery option (using WiFi) but it didn't helped.
11. During next restart I accidentally hold both volume up, down with power so phone tried probably to install system from SSD, but as there was no UPDATE.APP it just stopped at 5%. I left it as it is and after some time (around 5min) phone restarted.
12. Now after restart I see only info that "Your device is booting now...". All key combinations are causing phone restart and same message.
Please advise if there is anything what I can do now.
Will appreciate any help.

After discharging the battery phone started responding properly.
With connected USB cable, volume down and power buttons fastboot&rescue mode is working.
Phone unlocked
FRP unlocked
There is still EMUI recovery in place.
So looks like recovery partition was not replaced and bootloader was not locked again.
I can't tell what is in bootloader now.
System is cleared and can't reinstall it using Marshmallow recovery as it is probably end of maintenance.
My goal is to recover system now and I don't want to root it anymore.
How should I proceed?

JimiLincoln said:
After discharging the battery phone started responding properly.
With connected USB cable, volume down and power buttons fastboot&rescue mode is working.
Phone unlocked
FRP unlocked
There is still EMUI recovery in place.
So looks like recovery partition was not replaced and bootloader was not locked again.
I can't tell what is in bootloader now.
System is cleared and can't reinstall it using Marshmallow recovery as it is probably end of maintenance.
My goal is to recover system now and I don't want to root it anymore.
How should I proceed?
Click to expand...
Click to collapse
Hello,
it seemed that android 7 was your latest working OS.
Can you confirm it ?
If yes what was you complete firmware ?
(example: VNS-L31C432B418/VNS-L21C185B392, etc...)
note: 'EVA' stuff is for P9 variant, not P9 lite..
that's why you f***ed your phone...

Thank you Dadditz for your reply.
Dadditz said:
Hello,
it seemed that android 7 was your latest working OS.
Can you confirm it ?
If yes what was you complete firmware ?
(example: VNS-L31C432B418/VNS-L21C185B392, etc...)
Click to expand...
Click to collapse
It was 7 installed there for sure. And this is VNZ-L21.
Probably latest possible firmware version but can't be sure about this.
Can it be somehow checked now (guess not but not losing hope )?
Dadditz said:
Hello,
note: 'EVA' stuff is for P9 variant, not P9 lite..
that's why you f***ed your phone...
Click to expand...
Click to collapse
I took TWRP from here: twrp.me/huawei/huaweip9.html
When I look at devices list there is not P9 lite here: twrp.me/Devices/Huawei/
Which one should I use then?
P.S. sorry for no links or pictures but as new here I can't add them for now.
EDIT: I found TWRP in SRKToolHuawei-STABLE-V1.3-20160619\recovery\p9\p9.zip\twrpp9mm.img.
Guess I should load this one.
What do you think?

JimiLincoln said:
Thank you Dadditz for your reply.
It was 7 installed there for sure. And this is VNZ-L21.
Probably latest possible firmware version but can't be sure about this.
Can it be somehow checked now (guess not but not losing hope )?
I took TWRP from here: twrp.me/huawei/huaweip9.html
When I look at devices list there is not P9 lite here: twrp.me/Devices/Huawei/
Which one should I use then?
P.S. sorry for no links or pictures but as new here I can't add them for now.
EDIT: I found TWRP in SRKToolHuawei-STABLE-V1.3-20160619\recovery\p9\p9.zip\twrpp9mm.img.
Guess I should load this one.
What do you think?
Click to expand...
Click to collapse
I don't think firmware can be checked now...
Firmware may depend on where you live...
If you live in Europe it can be a branded one
(ex. vodafone: VNS-L21C02B345/6) or unbranded one(VNS-L21C432B505/6).
You cannot flash one of them if you have the other one.
You have to flash an OEMinfo file...
Anyhow you may try a factory reset first and let's hope it will restore the device.
Boot your phone with vol+and power till the e-recovery appear,
do the reset and report back how it went.
P.S.: P9 lite doesn't have an OFFICIAL TWRP.
Available unofficial versions can be founded searching into P9 lite XDA threads.
P.S.2 : A LITTLE SARCASM...
When you tinker with the phone you're not cooking
a plate of spaghetti with tomato sauce.
As you can see bricks are beyond the corner... and not always they can be solved...
Generally it is always better to ask before do, specially
if you don't know what you're doing ... but ... yes,
phone is yours and you can do anything you want...

Dadditz said:
Firmware may depend on where you live...
If you live in Europe it can be a branded one
(ex. vodafone: VNS-L21C02B345/6) or unbranded one(VNS-L21C432B505/6).
You cannot flash one of them if you have the other one.
You have to flash an OEMinfo file...
Click to expand...
Click to collapse
VNS-L21C22B383
Dadditz said:
Anyhow you may try a factory reset first and let's hope it will restore the device.
Click to expand...
Click to collapse
I don't have such option in Huawei eRecovery, only 3 below:
Download latest version and recovery
Reboot
Shutdown
When I used first option and connected trough WiFi I got error "Getting package info failed".
I tried that several times previous days but today this phone again surprised me.
After over 24 hours with discharged battery it became even more responsive (or maybe I just treated it different today).
Today I tried Huawei eRecovery again, it tried to download latest version trough WiFi and "Getting package info failed".
After restart I saw recovery wizard.
Went trough it and I got 7.0 working.
There was no screen keyboard but after recovering backup from HiSuite keyboard is was installed.
I'm also missing some other default android applications like file explorer, mirror, voice recorder, calc.
I'm wondering if it wasn't corrupted during my activities (eg "fastboot flash recovery twrp-3.1.1-0-eva.img").
Dadditz said:
P.S.: P9 lite doesn't have an OFFICIAL TWRP.
Available unofficial versions can be founded searching into P9 lite XDA threads.
Click to expand...
Click to collapse
When I mentioned about SRKToolHuawei-STABLE-V1.3-20160619.zip in my previous post it was one from:
forum.xda-developers.com/huawei-p9lite/how-to/guide-unlock-bootloader-twrp-root-t3405701
Would you recommend it?
Dadditz said:
P.S.2 : A LITTLE SARCASM...
When you tinker with the phone you're not cooking
a plate of spaghetti with tomato sauce.
As you can see bricks are beyond the corner... and not always they can be solved...
Generally it is always better to ask before do, specially
if you don't know what you're doing ... but ... yes,
phone is yours and you can do anything you want...
Click to expand...
Click to collapse
I fully agree with you.
I was searching for many instruction how to do it properly and my mistake was that I stopped fallowing them at point where I tried to installed manually TWRP.
My general conclusion is that even if system was recovered I'm not sure if everything will be ok.
I was totally surprised how my phone reacted during last days so still everything may happen.
I see also some corruption in restored system as some apps are missing.
Any advise how this could be cleaned?
Maybe I should install this system again from some trusted package like from below topic?
forum.xda-developers.com/huawei-p9lite/development/huawei-p9-lite-firmware-compilations-t3517124
What about unlocked bootloader? Should I leave it with annoying screen during phone startup or lock again?

JimiLincoln said:
VNS-L21C22B383
Click to expand...
Click to collapse
This is a good new !!
JimiLincoln said:
I don't have such option in Huawei eRecovery, only 3 below:
Download latest version and recovery
Reboot
Shutdown
When I used first option and connected trough WiFi I got error "Getting package info failed".
I tried that several times previous days but today this phone again surprised me.
After over 24 hours with discharged battery it became even more responsive (or maybe I just treated it different today).
Today I tried Huawei eRecovery again, it tried to download latest version trough WiFi and "Getting package info failed".
After restart I saw recovery wizard.
Went trough it and I got 7.0 working.
There was no screen keyboard but after recovering backup from HiSuite keyboard is was installed.
Click to expand...
Click to collapse
Also a good new !!
JimiLincoln said:
I'm also missing some other default android applications like file explorer, mirror, voice recorder, calc.
I'm wondering if it wasn't corrupted during my activities (eg "fastboot flash recovery twrp-3.1.1-0-eva.img").
Click to expand...
Click to collapse
Yes, surely.
JimiLincoln said:
When I mentioned about SRKToolHuawei-STABLE-V1.3-20160619.zip in my previous post it was one from:
forum.xda-developers.com/huawei-p9lite/how-to/guide-unlock-bootloader-twrp-root-t3405701
Would you recommend it?
Click to expand...
Click to collapse
No, this recovery isn't for nougat (android 7) version.
If you want, you can flash the one you find into HassanMirza01 TWRP thread.
Do not use 3.2.1, instead choose the 3.1.1-1 version, it's the most stable one.
JimiLincoln said:
I fully agree with you.
I was searching for many instruction how to do it properly and my mistake was that I stopped fallowing them at point where I tried to installed manually TWRP.
Click to expand...
Click to collapse
I agree too, it happen when process aren't properly followed...
JimiLincoln said:
My general conclusion is that even if system was recovered I'm not sure if everything will be ok.
I was totally surprised how my phone reacted during last days so still everything may happen.
I see also some corruption in restored system as some apps are missing.
Any advise how this could be cleaned?
Maybe I should install this system again from some trusted package like from below topic?
forum.xda-developers.com/huawei-p9lite/development/huawei-p9-lite-firmware-compilations-t3517124
What about unlocked bootloader? Should I leave it with annoying screen during phone startup or lock again?
Click to expand...
Click to collapse
Dude,
system can be fully recovered, especially now you're sure about
your latest firmware...
There was a thread with a list of stock apps, but it's been closed
because links are dead...
First thing, eliminate all safeties (fingerprints/pattern/pin)(you can add at the end of process)
You should try to reinstall your current firmware using Firmware Finder app,
download it from the big G store. Use dns/vpn method
and choose VNS-L21C22B383 FULLOTA-MF.
Also all info are inside the app. Using this method
the bootloader will be relocked.
If you wont succeed then i can tell you how to use twrp recovery
providing your stock full firmware.
Cheers

Dadditz said:
No, this recovery isn't for nougat (android 7) version.
If you want, you can flash the one you find into HassanMirza01 TWRP thread.
Do not use 3.2.1, instead choose the 3.1.1-1 version, it's the most stable one.
Click to expand...
Click to collapse
Thanks for that info. I will try it in a while when my wife will have new phone.
Dadditz said:
First thing, eliminate all safeties (fingerprints/pattern/pin)(you can add at the end of process)
Click to expand...
Click to collapse
Done
Dadditz said:
You should try to reinstall your current firmware using Firmware Finder app,
download it from the big G store. Use dns/vpn method
and choose VNS-L21C22B383 FULLOTA-MF.
Also all info are inside the app. Using this method
Click to expand...
Click to collapse
I fallowed instructions and choose first VNS-L21C22B383 FULLOTA-MF from the top (each version appear 2 times on this list).
Tried downloading trough DNS but got below message.
"Due to changes in the data exchange protocol between the Huawei server and the device, this function stopped its correct operation, but still works on older software that allows you to upgrade to one of the latest software if it has not already been done."
I tried with all FullOTA-MF versions on the list and same situation for all.
Because no other option I choose Download from last section (Other) and now I have 3 files on my phone:
update.zip
public/update_data_full_public.zip
VNS-L21_polkomtel_pl/update_full_VNS-L21_polkomtel_pl.zip
Should I install them manually?
If yes then how?
Vol+Vol-Power with those files on SD card or by TWRP?
Dadditz said:
the bootloader will be relocked.
If you wont succeed then i can tell you how to use twrp recovery
providing your stock full firmware.
Cheers
Click to expand...
Click to collapse
Many thanks for your help so far! Really appreciate that.

JimiLincoln said:
I fallowed instructions and choose first VNS-L21C22B383 FULLOTA-MF from the top
(each version appear 2 times on this list).
Tried downloading trough DNS but got below message.
"Due to changes in the data exchange protocol between the Huawei server and the device, this function stopped its correct operation, but still works on older software that allows you to upgrade to one of the latest software if it has not already been done."
I tried with all FullOTA-MF versions on the list and same situation for all.
Because no other option I choose Download from last section (Other) and now I have 3 files on my phone:
update.zip
public/update_data_full_public.zip
VNS-L21_polkomtel_pl/update_full_VNS-L21_polkomtel_pl.zip
Should I install them manually?
If yes then how?
Vol+Vol-Power with those files on SD card or by TWRP?
Many thanks for your help so far! Really appreciate that.
Click to expand...
Click to collapse
Dude, sorry if i wrote this.
I'm pretty sure you done everything correct,
but before attempt using the TWRP it's better if you
try again using Firmware Finder this way...
1 - connect to the internet, open the app, accept the disclaimer;
2 - add your complete firmware (add model) - VNS-L21C22B383;
3 - tap on your firmware;
4 - select the one with fullota-mf;
5 - tap check firmware access;
6 - tap check availability, accept disclaimer;
7 - you should have an 'availability of firmware' popup, tap ok;
8 - go back and tap 'get update through dns';
9 - a popup 'alert' you already faced will apper, tap ok;
10 - a new popup 'select dns method' will appear, tap 'auto',
then tap run vpn service and 'accept' the new connection request popup;
11 - you should now have the running vpn service in the notification panel...;
12 - minimize Firmware Finder;
13 - open settings > tap system updater,
you should find the VNS-L21C22B383 update (check multiple times);
14 - tap on it do download and apply the update;
15 - when the download reach 5%, stop the vpn service and continue doing the process...
It's something like THIS VIDEO.
Let me know...

Hi, your directions as well as movie you provided is giving much more details than application itself.
(In below description I had to use links without https as still I don't have enough posts to make them working.)
Dadditz said:
1 - connect to the internet, open the app, accept the disclaimer;
2 - add your complete firmware (add model) - VNS-L21C22B383;
3 - tap on your firmware;
4 - select the one with fullota-mf
5 - tap check firmware access;
6 - tap check availability, accept disclaimer;
7 - you should have an 'availability of firmware' popup, tap ok;
8 - go back and tap 'get update through dns';
9 - a popup 'alert' you already faced will apper, tap ok;
10 - a new popup 'select dns method' will appear, tap 'auto',
then tap run vpn service and 'accept' the new connection request popup;
11 - you should now have the running vpn service in the notification panel...;
12 - minimize Firmware Finder;
Click to expand...
Click to collapse
Done
Dadditz said:
13 - open settings > tap system updater,
you should find the VNS-L21C22B383 update (check multiple times);
Click to expand...
Click to collapse
No such option in my Phone. It looks like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ibb.co/Zf4k0fX
when it should look like this
ibb.co/C0NfpJd
I found it using search menu
ibb.co/SDSYdjR
but when I tap it nothing is happening
Dadditz said:
14 - tap on it do download and apply the update;
15 - when the download reach 5%, stop the vpn service and continue doing the process...
It's something like THIS VIDEO.
Let me know...
Click to expand...
Click to collapse
I wish I could do that

JimiLincoln said:
Hi, your directions as well as movie you provided is giving much more details than application itself.
(In below description I had to use links without https as still I don't have enough posts to make them working.)
Done
No such option in my firmware finder
ibb.co/DYkBGVH
ibb.co/rsNTvdb
so i tried to proceed without checking.
Done
No such option in my Phone. It looks like this
ibb.co/Zf4k0fX
when it should look like this
ibb.co/C0NfpJd
I found it using search menu
ibb.co/SDSYdjR
but when I tap it nothing is happening
I wish I could do that :
Click to expand...
Click to collapse
Thank you for all your feedbacks dude.
Yep, it's clear the firmware is completely f***ed...
Tomorrow i will tell you how to use TWRP
and completely restore the device.

@JimiLincoln
You can restore the exact same rom you had on your smartphone ...
(I'm not sure, it seems it's a sort of firmware branded by vodafone)
but if I can afford, if it were you
i would install the European non-brand version (C432),
without bloatware and should also have the most updated security patch.
Is the phone single or dual sim?
Also, let me know if you want to have all stocks or
have the bootloader unlocked for future manipulations ...

Hello @Dadditz,
Dadditz said:
You can restore the exact same rom you had on your smartphone ...
(I'm not sure, it seems it's a sort of firmware branded by vodafone)
Click to expand...
Click to collapse
It is branded by Polkomtel (plus.pl).
Dadditz said:
but if I can afford, if it were you
i would install the European non-brand version (C432),
Click to expand...
Click to collapse
European non-brand version would be the best.
Dadditz said:
Is the phone single or dual sim?
Click to expand...
Click to collapse
Dual (hybrid)
Dadditz said:
Also, let me know if you want to have all stocks or
have the bootloader unlocked for future manipulations ...
Click to expand...
Click to collapse
I have bootloader unlocked and if future modifications will not erase phone data then we could start with minimal version.
Thanks

JimiLincoln said:
Hello @Dadditz,
It is branded by Polkomtel (plus.pl).
European non-brand version would be the best.
Dual (hybrid)
I have bootloader unlocked and if future modifications will not erase phone data then we could start with minimal version.
Thanks
Click to expand...
Click to collapse
You must use a twrp to rebrand your phone.
Download and flash the one i suggested you (3.1.1-1 by HassanMirza01)
When you done, come back for the files and the guide...

TWRP 3.1.1-1 For P9 Lite by HassanMirza01 installed.
I can enter it only by holding Power + Vol Up without USB connected.
When I hold Power + Vol Up with USB connected Huawei eRecovery is launched.
Is it normal?

JimiLincoln said:
TWRP 3.1.1-1 For P9 Lite by HassanMirza01 installed.
I can enter it only by holding Power + Vol Up without USB connected.
When I hold Power + Vol Up with USB connected Huawei eRecovery is launched.
Is it normal?
Click to expand...
Click to collapse
Yes, normal, you have both
stock and custom recovery now...
Ok, i will post a list of file you have to download:
1 - HuRUpdater04.zip file (will do the job);
2 - L21C432OEMinfo.zip file (dual sim);
THE FIRMWARE:
3 - update.zip ;
4 - update_data_full_public.zip ;
5 - update_full_VNS-L21_hw_eu.zip ;
Let file 3 the same name, rename file 4 from
update_data_full_public TO update_data_public,
rename file 5 from update_full_VNS-L21_hw_eu TO update_all_hw.
Names must mandatory match the ones I wrote to you, otherwise it won't work.
This is the procedure:
Use your PC, make a folder and rename it L21C432B506.
Copy files 3-4-5 (renamed) and HuRUpdater04.zip file into that folder.
(if you want you can keep the TWRP copying the .img file into that folder too).
Copy the folder into the SD.
Copy the OEMinfo file wherever you want into the SD.
Put the SD into the device...
Reboot into recovery and format DATA
(wipe>advanced wipe>tick data and tap format in the bottom right> type 'yes').
Reboot again recovery and wipe everything except SD
(wipe>advanced wipe>tick everything except sd).
Go in main menu, tap install, find and select OEMinfo file, let it flash...
When finished go in main menu and select REBOOT then Bootloader.
Once booted, connect the phone to your PC and
unlock again the bootloader. (quickly disconnect it from PC)
Device should automatically reboot into the recovery otherwise you can do
holding vol + and power button.
Now tap install, find your L21C432B506 folder,
select (only) HuRUpdater04.zip file and let it flash...
Your device should reboot into the system correctly,
if not (if passes over 15 mins) reboot into the e-recovery and
do a factory reset + wipe cache.
Done !!

Hello Dadditz,
Everything installed and working fine
Only bothering thing is message that device was unlocked and can't be trusted.
I will keep this for now as it may be useful at some point.
Many thanks Dadditz for your great help!!!
I will probably come back to this topic when my wife will have new phone, so I will play more with this P9 lite, customize system and learn more.

JimiLincoln said:
Hello Dadditz,
Everything installed and working fine
Only bothering thing is message that device was unlocked and can't be trusted.
I will keep this for now as it may be useful at some point.
Many thanks Dadditz for your great help!!!
I will probably come back to this topic when my wife will have new phone, so I will play more with this P9 lite, customize system and learn more.
Click to expand...
Click to collapse
Amazing polite guy,
i was very pleased to be able to help you, obviously, for what I know ...
It's not a big deal to have that 'annoying' message at boot.
Re-lock the bootloader is the only way to remove it.
You have more than one method:
Flash a previous version of your current firmware
and use Firmware Finder to update to the latest;
or wait untill a new version of your current firmware comes out
and use Firmware Finder to update to;
or use fastboot commands but it's seriously risky;
Keep it as is..
Cheers dude. :highfive:

help
i have a similar problem BUT i can't restart my p9 lite in recovery mode. I tried vol+ & power; vol - & power; vol +, vol - & pwer; only power. The result is always the same: "your device as been unlocked and can't be trusted....... Your device is booting now....". I try also to wait to descharge battery. After descharging, when i connect usb cable to recharge, the smartphone wake on with the same message..... Someone can help me?

Dadditz said:
Amazing polite guy,
i was very pleased to be able to help you, obviously, for what I know ...
It's not a big deal to have that 'annoying' message at boot.
Re-lock the bootloader is the only way to remove it.
You have more than one method:
Flash a previous version of your current firmware
and use Firmware Finder to update to the latest;
or wait untill a new version of your current firmware comes out
and use Firmware Finder to update to;
or use fastboot commands but it's seriously risky;
Keep it as is..
Cheers dude. :highfive:
Click to expand...
Click to collapse
Hello Dadditz,
thank you for your warm words.
I can only comment that still being polite is much easier than spending your private time on helping stranger
Also thanks for warning about locking bootloader by fastboot.