Hello.
To get oreo I flashed AQL5 firmware via odin with re-partition unchecked.
I choosed normal CSC file not HOME_CSC in odin.
After flasing then in recovery factory reseting my CSC did not change to DTM ( AQL5 fw was with DTM csc ). Previously and now I still got PLS CSC.
Also after first configuration. Had to make a wierd license authorization via knox from my network provider.
NOW WHEN I want to update to oreo via stock recovery getting E:error in /sideload/package/zip status 7.
What's wrong
Related
So im currently have this phone GT-I9505 with firmware I9505XXUGNH8_I9505OLBGNH2_XTC and i dont have CSC when i check it using *#1234#
But everything is working fine, wifi, blueetoth, mobile data. i dont have any problem. How do i fiox this? can i just flash a csc? my phone CSC
in firmware is I9505OLBGNH2, but cant find flashable CSC tar or zip. I did try changing my CSC code, *#272*IMEI# but it doesnt work.
SO i Lost when i flash a Stock firmware UK BTU I9505XXUHOB7_I9505BTUHOB4_BTU from kitkat I9505XXUGNH8_I9505OLBGNH2_XTC
and then downgraded again to I9505XXUGNH8_I9505OLBGNH2_XTC. so when i downgraded my firmware ofcourse i wipe data and cache 1st
then reboot to download mode and flash stock kitkat autoreboot is untick then flash I9505XXUGNH8 bootloader and modem.
everything works fine except i dont have a csc and my country is SIN(singapore) is should be XTC(Open line) Philippines.
any help is appreciated.
Problem SOlved: i fix it by flashing the same firmware, what i did was, wipe date factory reset, wipe cahce then shutdown and enter download mode.
flash same firmware then i use *#272*IMEI# (this will wipe your data) and choose my country code. the device rebooted itself to recovery.
then device installed my country CSC (which is XTC for me). check my csc using *#1234#.
OK - I started with a unbranded UK A300FU - CSC code BTU on 5.x
I flashed a (supposedly) UK VOdafone 6.0.1 rom using Odin and the ROM n the AP sjlot
It appears this failed - my Modem wasn't updated an WiFi failed - the advice elsewhere is to go into download from a cold phone.
Also, it would appear the firmware wasn't UK, but some germanic version
I restored from a TWRP backup
My phone details now says the "orginal CSC Code" is VD2
If I want get back to showing Original code as BT should I re-flash in Odin the firmware that matched the twrp backup ? If so , should I stil use the AP slot, or should I use the CSC slot?
Many thanks
Use CSC slot.
Also, the reason why your TWRP backup restoration didn't touch the CSC is that it has it's own partition, which one normally does not backup.
You could flash an entirely unbranded marshmallow rom of your choice, and flash the BTU CSC of lollipop, it should still theoretically work.
HI.
I have 935F I bought with the CSC TPA.
I flashed a new firmware with another CSC, and now the CSC of my phone is empty (Recovery says multi-csc).
I flashed via odin AP. Do I need also to flash the CSC file in odin?
What is the solution to get the new CSC?
Thanks!
I have flashed nougat via odin without csc. My csc info shows nothing now. Will it make any problem or what if i flash csc only via odin?
Sent from my SM-G935F using Tapatalk
u have to flesh bl ap cp from n rom and ur hone csc or csc via doin
I dont understand..
Hi, I purchased an S7 Edge duo G935FD that was from Nigeria (CSC code ECT). It was running on Android 6 when I booted so I upgraded to 7 through OTA and checked Knox which showed as 0x0. I live in the UK and am with EE network, so i decided to flash the EE stock firmware to enable OTA and VoLTE (see download link below). The EE CSC code (EVR) did not show in my available CSC on the original firmware.
I downloaded and flashed the second to most recent EE firmware, so i could test OTA. The EE firmware is for the single sim version of the phone but I have read on this forum that the single sim firmware can be flashed to the duo. I flashed BL, AP, CP, CSC using Odin. I didn’t select re-partition.
The phone booted fine but the knox count had tripped to 0x1. I received notification of an OTA update but the OTA update failed (it downloaded and the phone rebooted, but the file did not take for some reason and i received an error message).
I then re-flashed the firmware but this time I selected re-partition in Odin. Everything worked and the OTA was successful.
How did I trip knox? I don’t want to make the same mistake in the future. Was it because i didn’t re-partition the phone on my first flash?
Many thanks
The firmware I downloaded: https://www.sammobile.com/firmwares/...U1DQE7/168839/
My device got FRP locked and so I used Odin to flash the official firmware from Sammobile and now I have T mobile menus like personal hotspot in my settings apps even though my device is the Wi-Fi only tab A 2016.
Here's how I got here:
I flashed the correct firmware, and in Odin I flashed the ap file, that's all. It succeeded but when installing updates, it said no command and went to the stock recovery. I factory wiped and rebooted.
How do I get rid of the T mobile menu's?
Any help would be appreciated
FIXED: Reflash in Odin with BL and CSC file
Same
I got the same problem, fixed it by flashing ap and csc
I live in the US and chose the XAR version from Frija
Now my lockscreen doesn't work, how do i fix it?