Related
Hoi Hoi people
i got myself a GT540 Optimus <yes total newbeee to android>
It came with a deal for free and its my 1st android :0
anyway
After USING the official way (silly me )to update I now have some odd Portuguese apps installed ? Stuff from SAPO.pt ???
I didn't do any Sync backup as i just got the phone and its basically empty
I used the Updater tool from LG connected and all went well But after I look I was able to change the language to ENG but it has quiet a few Portuguese Apps installed...
I am in Holland so i cannot see how this updater decided to give me a POR image ?
Now i could make a guess and say the IMEI is for Portuguese market(?) and the dutch INTERNET cheapo middleman I got the deal from has bought a bunch on the gray market ..
Whatever it is i don't care
I would like you guys now to point me the right way
I just flash the thing myself
I think the tool i need is called KDZ ?
Please someone point me to the right post I am looking but seem to get nowhere
just more confused
Thanks guys
B.T.W I am not too inept . I am used to flashin me HTC HD all the time ..
Follow the thread: http://forum.xda-developers.com/showthread.php?t=802895
to update to v2.1 Eclair.
or
follow
http://forum.xda-developers.com/showthread.php?t=857213
to update to Quarx's OpenSwift project v2.2.1.
Make sure you read the instructions very carefully.
Toen je de officele lg updater gebruikte, welke taal was hij toen?
Het kan zijn dat je dat aan het begin verkeerd heb ingesteld.
Joost
Thanks a lot guys
I followed the hints and now my LG is dead ..
LOL
This is rather annoying
1st I get a Crap gray import from 2call
then LG puts a Portuguese update rom on it??WTF!>?
while i choose NETHERLANDS with language english
but nevermind
buy **** buy twice thats life
My 1st and last lg phone ?/
What kind of rubbish is this
u update using the official LG tool and they play a freckin foreign rom onto my LG (SAPO.PT) then I cant update it at all anymore using the tool . So i look for alternatives but thats just made it worse ...
Really really poor this ..
Now ...I followed the guide but it didn't work ..well it did until restarted
My lg is now black. Dead ! doesn't start up at all !
Doesn't start no-matter what i try !
not even emergency mode.
And no guys I read the instruction word for word !!!!
I followed it to the letter !!!!! and the update did work ..Just now it doesn't start at all anymore.
I should of known reading around
there are too many update ways people are doing this ..Hack tool or original KDZ ..or just Black system way ..Too many loopholes for things to go wrong ..but now too late
Hmm...
Try a reflash...
This is a guide I followed from another forum, and posted elsewhere with some minor additions in case anyone had problems.
The guide is from a forum post at the android forums,it is NOT my work, the added bits are mostly what I have found from browsing here and from asking questions. While I can't be held liable if you mess your phone up having done so myself I thought this could helpa few people and save them searching various threads for answers so hope it helps
The guide
To install this ROM you need to have fastboot enabled on your phone. If you have Android 1.6/2.1 installed from LG, then fastboot is not enabled. I will explain how to enable fastboot on your phone (this involves re-flashing/replacing your currently installed firmware):
I am unable to post links yet so you will have to copy and paste the appropriate link into your browser replacing the ** with tt
KDZ Updater Carphone Warehouse Unlocked.zip can be downloaded at h**p://goo.gl/7aRTc - A link to a zip archive with all the files needed to flash to Android version 2.1 with fastboot (Carphone Warehouse Unlocked)
KDZ Updater Europe Open.zip can be downloaded at h**p://goo.gl/BOcYT - A link to a zip archive with all the files needed to flash toAndroid version 2.1 with fastboot (Europe Open)
Download the version that best applies to you, if you live in the UK, I'd recommend you download the Carphone Warehouse Unlocked version, whereas if you live in Europe, I'd recommend the Europe Open version (simple right? )
I live in the UK and used the open rom from Europe as the Carphone Warehouse rom would not install
Now, how to flash these versions; I'll explain in detail how to flash the ROM's from starting with backing up.
Instructions to install ROM with Fastboot:
1. Before you start, make sure you backup all your data by installing the z4root.1.3.0.apk file onto your phone, then open it and choose 'Permanent Root'. Your phone will root and reboot. Then go to the Market and install 'MyBackup Root', open it and do a backup of your apps and personal data (contacts, sms, call log etc.) Once this is done, go to Settings>SD Card and Phone Storage>Unmount SD Card, a notification in the notification bar should appear saying 'SD Card safe to remove'. Remove the battery cover and remove the SD card and store it in a safe place. Then continue to step 2.
2. Extract the .zip file you downloaded to your computer (e.g. your desktop). Open the folder and install MSXML 4.0 SP3 Parser (msxml.msi).
3. Once that has finished, install LGAndroidDriver_WHQL_ML_Ver1.0_All_Win7.exe which are the drivers so your computer will recognize your phone.
4. Next, open KDZ_FW_UPD.exe
(i) Change 'Type' to '3GQCT' *THIS IS A MUST, THE UPDATE WILL NOT WORK OTHERWISE AND YOU MAY BRICK YOUR PHONE*
(ii) Make sure 'PhoneMode' is set to 'DIAG'
(iii) Browse for the 'V20B_00+Fastboot.kdz' file.
5. Prepare the phone by enabling USB Debugging by going to Settings>Applications>Development>Enable USB Debugging and connect the phone to the computer via USB cable and wait for the drivers to install for the phone.
6. Click 'Launch software update' and do not use your computer until the update is complete. The update will take roughly 10-20 mins to complete.
If you have a problem with this try a different rom, this guide offers two to choose from.
Instructions to install CyanogenMod:
Once the update is complete, your phone will reboot, what you need to do is power off the phone and whilst the phone is off, press and hold the 'Camera' button all the way ANDpower on the phone, make sure you hold the 'Camera' button. The phone will display the LG logo and disappear, then display a blank screen. The phone is now in fastboot mode!
Now you want to download this file: Flashing CyanogenMod.zip and extract it to a folder called 'Android' (without the quotes '') on the C: drive (you'll probably need to make this folder yourself.
1. Now open CMD with administrator privileges (Search for CMD in the start menu and right click on 'cmd' and click 'Run as Administrator' )
2. Connect the phone to your computer via USB cable and wait for the necessary drivers to install.
If when connected with a usb cable the computer says "waiting for device" and nothing else happens try installing the fastboot drivers. You can do this by going to the control panel of your pc, from the Windows start menu, opening the list of devices and where you see the one representing your phone (likely, as was the case with me, it will say android and have a yellow exclamation mark over it). Different versions of Windows do things slightly different but what you need to do is simply update the driver by choosing the icons properties box choosing UPDATE or INSTALL DRIVER and when asked pointing it to the folder where you unzipped the drivers.
3. Then go back to the cmd window and type:
Code:
cd C:\Android
(i) Then type:
Code:
fastboot.exe -w
(ii) Once that's completed, type:
Code:
fastboot.exe erase system
(iii) Once that's completed, type:
Code:
fastboot.exe flash system system.img
(iv) Once that's completed, type:
Code:
fastboot.exe flash boot boot.img
(v) Once that's completed, type:
Code:
fastboot.exe reboot
4. Your phone will now reboot with CyanogenMod 6.1.1 (Android 2.2.1). The first boot might take longer than a normal boot.
If your phone stays at a blank screen you simply forgot to do one of the above steps, in which case simply repeat them. It is likely if that happens that you simply forgot the flash boot image instruction.
5. You can now re-insert your SD card and go to Settings>SD Card and Phone Storage>Mount SD Card
Enjoy!
The instructions for flashing both the firmware with fastboot and flashing CyanogenMod are included in the zip archives called 'Readme'. I'll update the links so that you'll always have the most up to date version of CyanogenMod available for download, note that if you choose to update your phone you will loose all your data including apps etc. so backup before you update
And that, with a few comments added by myself, is the guide.
Once you have set your phone up the way you want power off your phone. Hold the HOME and POWER buttons down while the LG logo appears and you will see a menu appear on screen.
Using the volume down key to navigate the different menu choices, and the camera button to select an option choose the BACKUP OR RESTORE option and from the sub menu that it will give you choose BACKUP.
This will make a backup of your phone AND all your data, if you ever mess up an update or think you have damaged your phone in the future simply holdthe POWER and HOME buttons down and when the menu appears choose the RESTORE option
Click to expand...
Click to collapse
And...
Don;t forget to install Fastboot drivers.
Dude
thanks a lot for your lengthy post and effort .I appreciate it .
but unfortunately U seem to miss the post I wrote.
MY LG doesn't even start anymore after using the Hack tool to upgrade it ...
SO its futile ??
I cant start the phone at all ...
After following yesterdays advice Its dead ..
Great init
Oh dang. Doesn't even turn on? No LG boot logo?
Well...if it's bricked...the only three ways are:
1) Get it repaired/replaced.
2) Buy a new phone.
3) Use it as a paperweight.
=)
No my friend ..its DEAD !!!!
following the guide to the letter
Installed parser got the hack tool
run all as admin and made sure I started windows enabler
All the things in the guide
worked a charm until reboot
Not its black and dead!!!
ANY IDEAS !!!!?????
Have you tried this...
If you did it with kdz updater than:
pull out battery, sim and sd
connect phone with computer
disable lg modem in the device manager
flash a rom with fastboot
go in fastboot by camara+power
connect to computer
type 'fastboot -w' and 'fastboot reboot' in cmd
Click to expand...
Click to collapse
I cannot see why this could work
The phone is dead ! it doest charge! it doesn't connect to the pc ! USB cable in out makes no difference !
I d love to try but how ??
contact303 said:
I cannot see why this could work
The phone is dead ! it doest charge! it doesn't connect to the pc ! USB cable in out makes no difference !
I d love to try but how ??
Click to expand...
Click to collapse
You can try by pulling out your battery, SIM card and SD card...
Note to you: Try everything that is possible and don't give up. Maybe you will fix it if you try.
Yes of course man I ll try thanks for the encouragement and your effort
It doesn't power at all
I DOESN'T connect to the pc
It Makes no difference if i have battery in or out .
sd card and sim are long removed ..and I tried with and without battery as well.
It updated, then rebooted to never come back ...
update tool reported Finished at the end
but its dead !!!
I understand id have a chance if i had at least a boot but I dont It dotn boot it dont Power up
Try getting into Emergency/Download mode by holding down "Volume Down" button and plugging into PC.
After that...try reflashing.
GL man.
Nope
Tried that combination as well
contact303 said:
Nope
Tried that combination as well
Click to expand...
Click to collapse
Opps sorry..."Volume Down" + "Power BUtton" while plugging into PC.
Try a hard reset as well...
Hold down VOLUME UP + HOME + SEARCH buttons for 5 seconds. (But phone needs to be turned on...)
MegaBubbletea said:
Opps sorry..."Volume Down" + "Power BUtton" while plugging into PC.
Click to expand...
Click to collapse
LOL yeah i knowww
I tried that as well
NO luck
hard reset i cant Its not on ...
Well...does anything happen when you press the "Power button"?
Dude LOLOL
Read again my 1st 2 posts
ITS dead ! nothing happens!
With battery or without makes no difference
NO BOOT! No power nothing
i followed the upgrade post in your 1t reply
it went all very well as i say
then it reboot and never got back
Hmm...probably give it a rest for a while...and then try again.
If all else fails..last resort.
Send back to LG for repairs or replacement.
mmh
So I gues iam screwed ..
I didn't even want to get into moddin the gt540 . Just the OFFICIAL 2.1 release really ..
And even that LG cant do without f&*kin me phone to Portuguese
So Well done LG )
hi guys.. could you help me with my problem.!
I have an LG GT540 android 1.6 firmware version(stock)
So here are my problems:
1. I tried to upgrade it from 1.6 to 2.1 using this tutorial http://forum.xda-developers.com/show...27&postcount=3 thanks to lavero.burgos for posting it, I was successful at first part, but I cant follow the next because my device wont go to fast boot,, I tried putting it off, then camera+poweron but it doesnt do anything. It doesn't light, no lg logo appears, just nothing although the computer can read the drive when I connect it through usb. So I cannot flash it to 2.3,2.3 because it just wont go to fastboot.
2. When I turn it on normally, It takes long before it response like after 30sec to light, but just light, no lg logo appears although it wasnt bricked because I can use it normally after just waiting to on.(annoying)
3. Since I upgraded it to 2.1, I lost all 3rd party application and the internal apps were the only left, so I copied all my saved apps (.apk) to my sd card but the problem is there is no saved app on my phone to read and install those apps from my sd card.(irritating)
4. My device wont read my sim card, when I start it it says "sim card unprovisioned" so basically I cant connect to mobile networks here in the philippines(im using globe telecom). I feel that Im stucked in the middle of nowhere since I cannot contact and txt all my family and friends.
5. I cant connect to wifi,, when my device detects wi-fi, I try to connect to it but from the log it only try to connect but doesn't obtain the ip address. Even when the wi-fi signal is strong, it does the same thing.
So please help me guys,,I want to hear from my fellow xda-developers badly,,,
PS. also those who have problems with their LG GT540 pls feel free to post and share it with us here... thank you all guys in advance....
hi so let me get it right the phone is working (can turn on and use but cant call) yes? hmmmmm..... try this
MUST DOWNLOAD THIS DRIVERS!!!!
http://dottech.org/android/26188/usb-adb-and-fastboot-drivers-for-windows-for-all-android-phones/
Step one!
1.turn off phone.
2.hold the POWER button till you feel the beep.
3.let go of the POWER button when you feel the beep and hold onto the CAMERA button only.
4.hopefully it turns on to a blackscreen and nothing else(fastboot)
5.unzip this CLICK ME!! to desktop and open the flash all no wipe file
or......
1.turn on your phone.
2.go to settings>applications>development>tick the usb debugging
3.connect phone to computer (make sure phone is on)
4.unzip this CLICK ME!! to desktop and open the flash all no wipe file
5. phone should boot into blackscreen like the one above......
Click to expand...
Click to collapse
Step 2!
both should flash a recovery image. Next
1.make sure the phone is off
2.press POWER button
3.when you feel the beep let go of POWER button and press the HOME button only.
4.phone should boot into recovery mode.
5.take out battery again
6. download a rom into the sdcard using computer
7.go to recovery again using the steps above (steps 1 to 4)
8.select wipe all data factory reset or something like that....
9.install zip from sdcard
10.select from sdcard
11.choose the file you downloaded
12.finish flash and reboot phone.
Click to expand...
Click to collapse
excellent guide! big thanx
bs828 said:
hi so let me get it right the phone is working (can turn on and use but cant call) yes? hmmmmm..... try this
MUST DOWNLOAD THIS DRIVERS!!!!
http://dottech.org/android/26188/usb-adb-and-fastboot-drivers-for-windows-for-all-android-phones/
Click to expand...
Click to collapse
Thanks,, Ive tried the 2nd option on step one and i think my phone successfully got to fastboot(just clean blank screen) so the cmd automatically run and states
C:\Desktop\adb rebootloader
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: protocol fault <no status>
C:\Desktop\fastboot flash recovery recovery.img
< waiting for device >
Did I miss something???
ok try again this time with the phone turned on. and then run the script and did you install the drivers?
bs828 said:
ok try again this time with the phone turned on. and then run the script and did you install the drivers?
Click to expand...
Click to collapse
yeah I installed the drivers...
hmmm maybe there are no fastboot drivers(main suspect....) there are a few ways to get it but for mine i just plug my phone in to my pc (windows 7 64bit) it just recognize it and tries to get the "google fastboot interface" drivers from windows update...
Try Volume Up+Search Key+Power to go into Fast boot Mode, There's different keys to activate Fastboot Mode (There is different versions of Fastboot)
Sent from my LG GT540 CM9 PreRC Polish Blood using xda premium
Your phone is/was bricked
Hey, I'm sorry to bing back such an old thread, but I just wanted to say this for posterity: your phone has/had a soft-brick. This means: you can't see Android nor LG boot logos, can't enter Recovery and (maybe) can't access Fastboot, but I'm not too sure on that last one. Besides that, the phone works "okay", but you should try to fix it.
Basically this soft-brick is almost always caught when upgrading from 1.6 to 2.1, so everyone should have it, including me. It took me a whole year to realize how to friggin' fix it lol, but here goes what I did:
Thanks for your help everyone, I came to a solution after a full year lol. Here's my enlightenment, from another Thread:
------------------------------------------------------------------------------------------
Just wanted to leave my 2 cents here, I've been trying to do my best since around august 2014, no success. 2 days ago I retried this, and I DID IT! I will tell everyone what I did very shortly:
My problem that I solved: I can boot, device works like a charm. But: no boot logos, no recovery.
My solution for TL;DR: UNINSTALL ALL DRIVERS FROM DEVICE MANAGER 1ST, then reinstall. After that, flash a fastboot ROM and use it to WIPE ALL THE DATA IN YOUR PHONE! THIS was what I needed and was never explained: you had to WIPE the old data in order to get the boot screens back.
IN THIS ORDER (THANK YOU to those people from previous replies, gathering all your info was of great value):
Uninstall all of your phone drivers from your PC!!! This is what made most of my headaches go away, just use Device Manager and uninstall anything from LGE. After that, plug in your device in your USB ports (always BACK ports, not front ports, important). It should detect all drivers and download them.
IF it fails (it generally does with LGE USB Modem), you can go to Device Manager > Unknown Device (the one that wasn't recognized) > Right Click and Update > Choose 2nd option, then choose "choose from a list of local controllers" (or whatever the button says). After that, scroll down to LG Electronics, Inc. and install what didn't install.
I also found these drivers, but I did not test them: http://www.mediafire.com/download/p693hcz6kkouh19/USB_Driver_LG_GT540.zip
Huzzah!
Now you're set to begin:
FIRST thing you wanna do is a factory reset, this is something I'd forgotten with time, don't make the same mistake as I did. You can do it by turning your phone on and pressing Volume +/- & Home & Quick Search buttons all together for 5 seconds (it works, be patient and wait for it, even if you open the camera or any other stuff).
Download this Google SDK Tools (unzip and put the folder in C:\ drive) and this Fastboot drivers for GT540 (unzip and put the files inside the folder in C:\android-sdk).
Skip this next line if you know your ROM has fastboot.
Now, if you don't have a ROM with fastboot, I recommend you use either European Open+Fastboot or V20C Orange France Fastboot ROM.
Click to expand...
Click to collapse
Since you have Fastboot enabled, now all you need to do is turn off your device (all this with its battery on it, no weird things) and hold the Camera button before turning it back on. This should take you either to a black screen, or simply to no display, like me. Either one will work anyways.
Now press the Windows key > Type cmd and open it with Right Click > Run as Administrator.
In it, type all this, command by command (you can paste by right clicking):
cd C:\android-sdk
fastboot -w
fastboot erase boot
fastboot erase system
fastboot -w
fastboot reboot
Click to expand...
Click to collapse
And now it's go time! Do what everyone else says in here: Take out your phone's battery, SD and SIM cards, fire KDZ Updater up as Administrator (If your KDZ freezes, then it's either faulty or you did not install msxml, look for a good KDZ that comes with that file and delete your current one), choose CS_Emergency PhoneMode and:
1-Plug your phone while holding the volume DOWN button (don't worry! My phone didn't show "Download Mode" either, if you hear the Windows "Somethingpluggedin" Bump noise, it's ok).
2-Flash French V20A
3-Unplug your phone once KDZ says "==FINISHED==".
4-Plug it once again, holding the volume DOWN button.
5-Flash out.kdz (remember! it's CS_Emergency).
Click to expand...
Click to collapse
THANK YOU XDA!
--------------------------------------------------------------------------------------
Also, if you look in here you'll find how to flash an awesome ROM, Cyanogen Mod 10 (should say "Final Version#2).
I have meizu m2 note. Its now bricked. I was using sp flash tool to unlock the bootloader and install twrp recovery.
i was following the guide giving on youtube. I can't attach an outside link here.
So i did everything this guide said, but on the last step when i switched off my phone and connected to the usb port. The sp flash tool stopped working i waited for 5-10 mins. Finally it crashed. Now when i try to connect my phone it says usb device not recognised (the last device you connected to this computer malfunctioned). I cannot start my phone. I tried pressing the power button for 10 secs, tried pressing volume + with power button, nothing happens.
Anybody have any idea how to solve this.
Go to download old version Flyme os 4+ any but original rom you have must install,
And dow load any latest sp tool,
And also downlaod latest all mtk devices drivers,
If you have system knoledge you can install all of these pc softwares,
Test it once again your phone connecting to computer,
Just detected only nothing. Can do that its just detected your will be alive soon but its very easy if you know a little bit mobile knowledge,
Lets go to process
Step 1 check best and good branded usb connecting cable, test to connect usb cable to your phone,
Step 2 extract Flyme stock rom, and extract mtk sp tool,
Step 3 open sp tool showing error there is no any scatter. Or download file dont worry, da file availble at sptools folder you can go and select, and scatter. File availble at flyme stock rom folder lets check it then select firmware all formate and install that you have to select that option, then you select download and now connect your phone just leave ituntill done then your phone is will alive feel happy like me if you need any more information any other problem connect. To. Me
Can you speak more clearly?I don't understand.Because my English is not very good.
zzx3731 said:
Can you speak more clearly?I don't understand.Because my English is not very good.
Click to expand...
Click to collapse
What problem with your phone?
Hi ! I have the same problem right now, when I plug it, it says device not recognised, what could I do now ?
Thank you very much，This is my mobile phone. It's done.Thank you for your kindness.
：○
Hagadou said:
What problem with your phone?
Click to expand...
Click to collapse
I been able to install LineageOS, I fixed it by pressing home and menu button, it disconnect and reconnect and i been able to Re-flash it with the recovery and when i tried to install Lineage, my error was gone (error 7)
Ok guys here is the step by step even for noobs how to unbrick Xiaomi Mi Max (helium).
If you have access to fastboot jump to step 11
Requirements :
* MiFlash Beta :Download Here
* MiFlash 20151028 : Download Here
* Global Fastboot Rom : Download Here
* Xiaomi Qualcomm Drivers
* Screw and tools.
* Paper clip or cable
* For sure Usb Cable.
Now if you all ready lets continue repair. First of all you need to open back cover.
1) Open Back cover and disconnect fingerprint sensor and battery. Dont connect battery till you finish whole process. (How to disassemble video : https://www.youtube.com/watch?v=YMG04GqVU_0&t=64s)
2) Make a paper clip to setup short circuit in your mainboard. Here are the testpoints. https://s15.postimg.org/s0j0qhq3v/Xiaomi_Max_Test_Points.png
3) Ok here is the hardest and trickiest one. While you are holding paper clip or cable with those testpoint you need to connect phone to pc. My suggestion 1st connect usb cable to phone then make short circuit then connect to pc.
* One more time you need to connect phone to pc while those two testpoints connected to eachother with a paperclip or a cable.
4) Here is the second tricky part. Unzip rom file. Important part is the name of folder. Please try to make it as short as possible.
Ex : C:\mimax\
So after extraction your folder will looks like this : http://oi63.tinypic.com/334rr11.jpg
5) You need to install both MiFlash versions. They are 2 different software so you shouldnt see any errors like "it is already installed".
6) Go To C:\XiaoMi\XiaoMiFlash and run XiaoMiFlash.exe as an administrator. Click browse and choose your rom folder. NOT IMAGES FOLDER ROM FOLDER !!!! ( Ex : C:\mimax)
7) Click "refresh" you will see COM port and click "flash" If you dont see any COM port here first check if you installed drivers correctly. If drivers are installed correct please go back to step 3 and try again.
8) Install will start and continue and %99 possibly it will stop in the middle You will receive Max buffer 256 error. No worries just keep calm and take deep breath. Go to next step
9) Disconnect usb cable from pc and phone. Reconnect battery. Now voila phone will ready to work BUT NOT READY TO WORK FLAWLESS. So now put your phone to fastboot mode. Yes you read correct now your phone will be in fastboot mode even it could be ready to use but just wait for next step.
10) Fastboot mode : Volume Down + Power button you will see fastboot screen and connect to PC.
11) Now close old MiFlash and run the normal one from either desktop or C:\Program Files (x86)\Xiaomi\MiPhone\MiFlash.exe or C:\Program Files\Xiaomi\MiPhone\MiFlash.exe.
12) Choose your rom folder. NOT IMAGES FOLDER ROM FOLDER !!!! ( Ex : C:\mimax).
13) Click "refresh" and this time you have to see device serial number on device tab. Now click flash and let process finish. It takes around 3-5 minute and phone will reboot by itself.
Now re-assemble your phone. DONT FORGET TO CONNECT FINGERPRINT SENSOR. Now you are totally ready.
Tried 5 times with my very own Xiaomi Mi Max 128 GB.
Different reactions
Hi,
My device could still boot on fastboot mode, and flashes successfully through it on MiFlash Beta. However, the device remains stuck on Mi logo. I've already tested flashing on EDL mode apparently successfully, with the same results. I've flashed TWRP, but the device don't enter recovery mode. What can I do? Any suggestion will be welcome.
benzersizadam said:
Many thanks for this thread, I stuck on my mi max with no reaction at anything, I read more than 100 threads, I tried testpoint, DFC (deep flash cable), click inside usb terminal to pc, windows 8, 7 10, 32 bits, 64 bits, programms like qfil (qpst), flasher tools for other phones and nothing, before with other apps at first second gives me error "can not read from port COM...", and now at least advance to 5 seconds with same error, I need to know it is neccesary too disconnect, remove two plastic cables down where places the battery
Click to expand...
Click to collapse
Working also with Hydrogen. Thanks.
@benzersizadam
This is why XDA is a great FORUM! Thank you for writing this thorough solution!
My device is up and running currently with MIUI 8! It went from a dead brick to a productive device again! I was almost giving up hope! You saved the day! It was a lot of work, but it is great seeing the device alive again.
I would just add that taking the cover off doesn't even need a tool like in the original disassembly youtube video: https://www.youtube.com/watch?v=dULcMWCEgEc
Yay!
coffee-turtle said:
@benzersizadam
This is why XDA is a great FORUM! Thank you for writing this thorough solution!
My device is up and running currently with MIUI 8! It went from a dead brick to a productive device again! I was almost giving up hope! You saved the day! It was a lot of work, but it is great seeing the device alive again.
I would just add that taking the cover off doesn't even need a tool like in the original disassembly youtube video: https://www.youtube.com/watch?v=dULcMWCEgEc
Yay!
Click to expand...
Click to collapse
Can you kindly explain some tips or secret to get unbrick cause mine is more than 4 months almost totally dead, just receive charge the battery but any signal of life in display, don´t enter recovery, fastboot, in mode EDL pc identifies like hs-usb qdownload 9008 but in 4 or 5 seconds cut conection with pc. and in my country nobody knows about Xiaomi. thanks in advance
SubwayChamp said:
Can you kindly explain some tips or secret to get unbrick cause mine is more than 4 months almost totally dead, just receive charge the battery but any signal of life in display, don´t enter recovery, fastboot, in mode EDL pc identifies like hs-usb qdownload 9008 but in 4 or 5 seconds cut conection with pc. and in my country nobody knows about Xiaomi. thanks in advance
Click to expand...
Click to collapse
Hi @SubwayChamp Everything I did was in the post and video from above in the first post by benz....
His instructions were perfect along with the youtube video. It's tricky, true, but with patience you can go through the steps and get your device running again. I was so glad that @Qulox gave me this link to this thread.
As you go through the steps, if you get stuck, we can try to give you advice.
This works for Hydrogen as well.
Many thanks
I have two dead mi max. One 128gb helium and one 32gb hydrogen.
128gb helium is completely lifeless. No charging led, no vibrations, no fastboot mode. Though i could bring it up to edl mode showing right qualcomm device in device manager. I tried flashing stock rom as mentioned in this guide which rather went successful without giving any error, even while battery connector was removed.
But mobile is still in same lifeless condition. Other than flashing process going through, it didnt make any difference. Dont know whats wrong. Also i didnt have to use two miflash versions as mentioned in steps as flashing process didnt give any error.
32gb hydrogen, boots up in flashboot mode, shows charging led, mi logo even edl model worked without any issue. It even boots up, but gives error of encryption unsuccessful asking me to reset device. I tried factory reseting it. Tried flashing twrp and wiping, formatting data, changing file system to all formats like fat, f2fs, ext1, ext2, ext3, ext4. Tried flashing crdoid and RR based on orea. Nothing working.
With twrp it keeps bootlooping showing mi logo. And with stock rom, recovery shows up encryption error. Followed procedure mentioned in this guide as well.
Is there anything am i missing or can do? Btw, bootloader is locked for both the devices. I could flash twrp referring another guide which suggested to replace stock recovery in rom files/ folder and flashing it like stock rom through miflash tool.
Battery problems? in the 128 especially?
If "nothing works" through any normal software methods, the ram &/or ROM memory chips might have become semi-defect. They are not eternal . . .
cobben said:
Battery problems? in the 128 especially?
If "nothing works" through any normal software methods, the ram &/or ROM memory chips might have become semi-defect. They are not eternal . . .
Click to expand...
Click to collapse
Tried replacing battery as well. Surprising thing is completely dead 128gb helium does boot up in edl mode with flashing working perfectly file in miflash tool. Dont know how reliable that software is.....
Hello,
trying with both Helium & Hydrogen. Still on error like say these logs.
log#1
Code:
[0,02 COM7]:[COM7]:start flash.
[0,02 COM7]:received hello packet
[0,02 COM7]:can not found programmer file.
log#2
Code:
[0,00 COM7]:[COM7]:start flash.
[2,03 COM7]:cannot receive hello packet,MiFlash is trying to reset status!
[4,56 COM7]:cannot receive hello packet,MiFlash is trying to reset status!
[7,11 COM7]:try to reset status.
[7,13 COM7]:Switch mode back
[7,13 COM7]:cannot receive hello packet,MiFlash is trying to reset status!
[7,14 COM7]:Riferimento a un oggetto non impostato su un'istanza di oggetto.
Hope anyone can help me. What's my wrong following the guide.
Thanks
harpy.eagle said:
Tried replacing battery as well. Surprising thing is completely dead 128gb helium does boot up in edl mode with flashing working perfectly file in miflash tool. Dont know how reliable that software is.....
Click to expand...
Click to collapse
Hi there.. The link of video & image of test points is not working. Can anybody please share working links
Hi there.. The link of video & image of test points is not working. Can anybody please share working links
rizkhan77 said:
Hi there.. The link of video & image of test points is not working. Can anybody please share working links
Click to expand...
Click to collapse
This is the video of Test Point https://youtu.be/SqcVY8IWkZI
benzersizadam said:
Ok guys here is the step by step even for noobs how to unbrick Xiaomi Mi Max (helium).
If you have access to fastboot jump to step 11
Requirements :
* MiFlash Beta :Download Here
* MiFlash 20151028 : Download Here
* Global Fastboot Rom : Download Here
* Xiaomi Qualcomm Drivers
* Screw and tools.
* Paper clip or cable
* For sure Usb Cable.
Now if you all ready lets continue repair. First of all you need to open back cover.
1) Open Back cover and disconnect fingerprint sensor and battery. Dont connect battery till you finish whole process. (How to disassemble video : https://www.youtube.com/watch?v=YMG04GqVU_0&t=64s)
2) Make a paper clip to setup short circuit in your mainboard. Here are the testpoints. https://s15.postimg.org/s0j0qhq3v/Xiaomi_Max_Test_Points.png
3) Ok here is the hardest and trickiest one. While you are holding paper clip or cable with those testpoint you need to connect phone to pc. My suggestion 1st connect usb cable to phone then make short circuit then connect to pc.
* One more time you need to connect phone to pc while those two testpoints connected to eachother with a paperclip or a cable.
4) Here is the second tricky part. Unzip rom file. Important part is the name of folder. Please try to make it as short as possible.
Ex : C:\mimax\
So after extraction your folder will looks like this : http://oi63.tinypic.com/334rr11.jpg
5) You need to install both MiFlash versions. They are 2 different software so you shouldnt see any errors like "it is already installed".
6) Go To C:\XiaoMi\XiaoMiFlash and run XiaoMiFlash.exe as an administrator. Click browse and choose your rom folder. NOT IMAGES FOLDER ROM FOLDER !!!! ( Ex : C:\mimax)
7) Click "refresh" you will see COM port and click "flash" If you dont see any COM port here first check if you installed drivers correctly. If drivers are installed correct please go back to step 3 and try again.
8) Install will start and continue and %99 possibly it will stop in the middle You will receive Max buffer 256 error. No worries just keep calm and take deep breath. Go to next step
9) Disconnect usb cable from pc and phone. Reconnect battery. Now voila phone will ready to work BUT NOT READY TO WORK FLAWLESS. So now put your phone to fastboot mode. Yes you read correct now your phone will be in fastboot mode even it could be ready to use but just wait for next step.
10) Fastboot mode : Volume Down + Power button you will see fastboot screen and connect to PC.
11) Now close old MiFlash and run the normal one from either desktop or C:\Program Files (x86)\Xiaomi\MiPhone\MiFlash.exe or C:\Program Files\Xiaomi\MiPhone\MiFlash.exe.
12) Choose your rom folder. NOT IMAGES FOLDER ROM FOLDER !!!! ( Ex : C:\mimax).
13) Click "refresh" and this time you have to see device serial number on device tab. Now click flash and let process finish. It takes around 3-5 minute and phone will reboot by itself.
Now re-assemble your phone. DONT FORGET TO CONNECT FINGERPRINT SENSOR. Now you are totally ready.
Tried 5 times with my very own Xiaomi Mi Max 128 GB.
Click to expand...
Click to collapse
hi, could someone share with me the miflash beta? I can download the rest but I cannot download the beta one.
thanks
Wanted to say thank you was able to recover my mi max 64gb unit.
1. What is a "hard bricked" phone?
Hard brick is the state of android device that occurs when your device is unbootable without a bootloop. A hard Brick device generally show little to no signs of life (you wont be able to switch it on and the screen doesnt turn on).
A phone gets hard-bricked due to trying install ROM not made for the device or use ROM Manager incorrectly.
2. Procedure
Step 1: Download all the necessary files below:
download link: en(dot)miui(dot)com/a-234.html
MIUI ROM Flashing Tool(*.exe file)
MIUI Fastboot ROM package for your device(*.tgz file) - Any variant Global / Chinese should work
Step 2: Extract MIUI Fastboot ROM package using 7zip or any other software you prefer
Correctly extracted folder should look like: (Image folder), flash_all.bat e.t.c.
After extracting rename parent folder to something short such as "mido". Avoid parent folder of ROM package extracts being too long
Step 3: Install MIUI ROM Flashing Tool
If you get "driver not signed pop up during installation click "install anyway option or similar"
To test if everything installed correctly, connect your phone to your computer and open flash tool then hit refresh button, you should see an index and com port which indicates your phone is being detected.
If phone not detected restart computer with phone still connected and navigate to device manager->ports (you should see something like Qualcomm hs-usb qdloader 9008.) if its not there re install MIUI ROM Flashing tool
Note that if you try to flash your extracted package at this point the installer will fail to communicate with the phone, step 4 is very necessary to ensure flashing can commenceStep 4: Remove back cover and disconnect phone battery
Disconnect your phone from your PC and find a nice dissasembly video on youtube to help you remove the back case of your phone. The battery is connected to the phone via one black flex cable on the right of the battery, simply detach this to disconnect battery.
Step 5. Flash your phone.
With your phone still opened, and battery still disconnected.
1. Open Flashing tool and connect your phone to your computer
2. Hit refresh to let your computer detect your phone.
3. Hit select/browse button and select parent folder from step 2. which has your rom
4. Select clean all option at the bottom of flash tool window
4. Hit flash.
5. Once flash is complete your phone will remain off disconnect from computer and reconnect the battery then switch your phone on.
3. Done
At this point your phone should be back to life. Close your phone's cover and then youre done.This guide helped me revive my Redmi note 4X snapdragon 625 3GB - please share youre experience if it doesnt work for you
Thanks man!!!!!!!!!!
Y day my rn4 sd hard bricked, with your guide I completely recover it.......
Once again thanks...... :victory:
Please, help me:
"cannot receive hello packet,MiFlash is trying to reset status!"
alexfelipe said:
Please, help me:
"cannot receive hello packet,MiFlash is trying to reset status!"
Click to expand...
Click to collapse
Yeah, I'm getting that. And then "Object reference not set to an instance of an object" But then I just tried a few more times, maybe unplugged the cable and plugged it in again, and it worked.
not working
not working on my RN4X. while using MiFlash 2015 it is stuck on "Send nop command" and while using the 2016 version of MiFlash it is either "cannot receive hello packet" or cannot "ping". the latest version of MiFlash cannot be installed because of some cabinet file is missing. I'm stuck with this for a whole day now. is there anything that I'm missing??