I currently have the U1 unlocked firmware flashed and am trying to flash it back to the original U firmware because of the new bootloader issue. I am receiving an Odin fail error all the time with different USB ports and computers. Is there something I did wrong? Also, I purchased this as a G950U device. I recently got it unlocked through ATT so does that mean it is now a G950U1 device?
The G950U is the unlocked version, so why did you have to unlock it through AT&T?
It should've worked straight off the bat.
This is the U version (For USA, unlocked version) https://www.gsmarena.com/samsung_galaxy_s8-8161.php#g950u
And the AT&T version is the G950A.
Ross is confused.
I had this once when PrinceComsy Odin wouldn't work. Use this Odin, it worked when nothing else would, IDK why
https://drive.google.com/file/d/1s15geKe625T11lpkClq49zTsMjqOmYhl/view?usp=drivesdk
joe3681 said:
Ross is confused.
I had this once when PrinceComsy Odin wouldn't work. Use this Odin, it worked when nothing else would, IDK why
Click to expand...
Click to collapse
Fail again. The phone is showing "SW REV CHECK FAIL : [abl]Fused 2 > Binary 1"
joe3681 said:
Ross is confused.
I had this once when PrinceComsy Odin wouldn't work. Use this Odin, it worked when nothing else would, IDK why
Click to expand...
Click to collapse
Failed again. I'm getting "sw rev check fail : [abl]Fused 2 > Binary 1"
Is the bootloader version on the firmware you're trying to flash the same as the one that's on there now? You can't downgrade bootloader versions.
ironbesterer said:
Is the bootloader version on the firmware you're trying to flash the same as the one that's on there now? You can't downgrade bootloader versions.
Click to expand...
Click to collapse
I'm honestly not sure. The firmware was the original stock ATT version and I was running the latest Nougat update. I switched the CSC code back to ATT from AIO this morning using the main guide here, but I am now stuck on that Factory Binary screen. Is there a firmware for v2 bootloader for ATT out there?
ironbesterer said:
Is the bootloader version on the firmware you're trying to flash the same as the one that's on there now? You can't downgrade bootloader versions.
Click to expand...
Click to collapse
Figured it out, I have v2 bootloader software and the unlocked software I am using is v1. Could someone please give me a link to v2 unlocked firmware? I'm honestly drained at this point and I'll just not do any OTAs from this point on.
roguester91 said:
Figured it out, I have v2 bootloader software and the unlocked software I am using is v1. Could someone please give me a link to v2 unlocked firmware? I'm honestly drained at this point and I'll just not do any OTAs from this point on.
Click to expand...
Click to collapse
QL1 is the latest. This is labeled as vzw but it's all inclusive so it installs properly depending on your sim:
https://fws02.updato.com/GALAXYS8/SM-G950U/VZW/SM-G950U_1_20171206182640_wp1tc0yal5_fac.zip
---------- Post added at 06:34 PM ---------- Previous post was at 06:33 PM ----------
roguester91 said:
Figured it out, I have v2 bootloader software and the unlocked software I am using is v1. Could someone please give me a link to v2 unlocked firmware? I'm honestly drained at this point and I'll just not do any OTAs from this point on.
Click to expand...
Click to collapse
QL1 is the latest. Labeled as vzw but it's all inclusive so it installs properly based on what sim you're using
https://fws02.updato.com/GALAXYS8/SM-G950U/VZW/SM-G950U_1_20171206182640_wp1tc0yal5_fac.zip
joe3681 said:
QL1 is the latest. This is labeled as vzw but it's all inclusive so it installs properly depending on your sim:
https://fws02.updato.com/GALAXYS8/SM-G950U/VZW/SM-G950U_1_20171206182640_wp1tc0yal5_fac.zip
---------- Post added at 06:34 PM ---------- Previous post was at 06:33 PM ----------
QL1 is the latest. Labeled as vzw but it's all inclusive so it installs properly based on what sim you're using
https://fws02.updato.com/GALAXYS8/SM-G950U/VZW/SM-G950U_1_20171206182640_wp1tc0yal5_fac.zip
Click to expand...
Click to collapse
I got desperate and rooted due to needing to do an important phone call. Are there any guides that can walk me through this? Also your link gives me some weird hotlinking error.
joe3681 said:
QL1 is the latest. This is labeled as vzw but it's all inclusive so it installs properly depending on your sim:
https://fws02.updato.com/GALAXYS8/SM-G950U/VZW/SM-G950U_1_20171206182640_wp1tc0yal5_fac.zip
---------- Post added at 06:34 PM ---------- Previous post was at 06:33 PM ----------
QL1 is the latest. Labeled as vzw but it's all inclusive so it installs properly based on what sim you're using
https://fws02.updato.com/GALAXYS8/SM-G950U/VZW/SM-G950U_1_20171206182640_wp1tc0yal5_fac.zip
Click to expand...
Click to collapse
Hey joe thanks for this! I figured I'd give it a shot to flash back to unroot and it worked! I also checked my warranty in the download mode and it's still at 0x0 and I'm still able to use Samsung Pay/Secure Folder so I didn't even trip Knox.
roguester91 said:
Hey joe thanks for this! I figured I'd give it a shot to flash back to unroot and it worked! I also checked my warranty in the download mode and it's still at 0x0 and I'm still able to use Samsung Pay/Secure Folder so I didn't even trip Knox.
Click to expand...
Click to collapse
Glad to help!
Related
Finally here. Currently only OTA update available, but should work on TMO variant.
http://mobilesyrup.com/2016/05/26/bell-samsung-galaxy-note-4-marshmallow-update-canada/
Really.. The canadians get the update before the us... i'm getting a lg that was the last straw....
HockeyNinja said:
Finally here. Currently only OTA update available, but should work on TMO variant.
http://mobilesyrup.com/2016/05/26/bell-samsung-galaxy-note-4-marshmallow-update-canada/
Click to expand...
Click to collapse
Can i flash this on n910t?
Avide said:
Can i flash this on n910t?
Click to expand...
Click to collapse
First off it's only on the note 4 from north america... 2 it's only over the air (OTA) so there is no firmware to download... that i know of..
S5Sickness said:
First off it's only on the note 4 from north america... 2 it's only over the air (OTA) so there is no firmware to download...
Click to expand...
Click to collapse
Weird, i was thinking that this is one of the Canadian versions avaliable for download http://www.sammobile.com/firmwares/download/72507/N910W8VLU1DPE2_N910W8OYA1DPE2_BMC/
Also i forgot N910T it's not from north america.
This is ridiculous! T-mobile updated all of their scheduled MM updates, except Note 4s and Tab S2! Whats wrong with them!!! I'm soo mad...
Avide said:
Weird, i was thinking that this is one of the Canadian versions avaliable for download http://www.sammobile.com/firmwares/download/72507/N910W8VLU1DPE2_N910W8OYA1DPE2_BMC/
Also i forgot N910T it's not from north america.
Click to expand...
Click to collapse
This might have just came out after i posted this... but if it will work with your phone as long as the model match then no reason why you can't upgrade....
if you want to download it, just get samfirm and download it using that with model number as sm-n910w8 and either use TLS (Telus) or RWC for Region.
Set the option to decrypt automatically. You can use odin to flash.
goofball2k said:
if you want to download it, just get samfirm and download it using that with model number as sm-n910w8 and either use TLS (Telus) or RWC for Region.
Set the option to decrypt automatically. You can use odin to flash.
Click to expand...
Click to collapse
So you are saying i can flash the sm-n910w8 firmware onto the t-mobile note 4?
S5Sickness said:
So you are saying i can flash the sm-n910w8 firmware onto the t-mobile note 4?
Click to expand...
Click to collapse
Fwiw, it decrypts/ extracts as a .zip file, so won't flash in Odin. I assume it's a zip due to it being a downloadable update directly to the phone. Flash in TWRP or CWM?
---------- Post added at 07:44 PM ---------- Previous post was at 07:40 PM ----------
Avide said:
Also i forgot N910T it's not from north america.
Click to expand...
Click to collapse
Well...it is indeed from North America, as the USA is in North America. However, it is not the "North American" version.
Will it work in a N910T? Beats me.
Anyone else having problems with ALL other ROMs not booting up after upgrading to N910W8VLU1DPE2?
NIKKOTUASON said:
Anyone else having problems with ALL other ROMs not booting up after upgrading to N910W8VLU1DPE2?
Click to expand...
Click to collapse
if you upgraded from 5.1.1 to 6.0 you have lost root more then likely.. you may need to wait for a new way to root 6.0..
S5Sickness said:
if you upgraded from 5.1.1 to 6.0 you have lost root more then likely.. you may need to wait for a new way to root 6.0..
Click to expand...
Click to collapse
No need to wait, the latest cf-auto-root from chainfire works fine on 6.0.
---------- Post added at 11:47 PM ---------- Previous post was at 11:41 PM ----------
Pinan said:
Fwiw, it decrypts/ extracts as a .zip file, so won't flash in Odin. I assume it's a zip due to it being a downloadable update directly to the phone. Flash in TWRP or CWM?
---------- Post added at 07:44 PM ---------- Previous post was at 07:40 PM ----------
Well...it is indeed from North America, as the USA is in North America. However, it is not the "North American" version.
Will it work in a N910T? Beats me.
Click to expand...
Click to collapse
Actually the DPE2 firmware is posted as a zip, but once you unzip your download (which is over 2 GB in size, btw!) you will have a .tar.md5 file that you flash with Odin in the usual way.
As for the question of whether you actually _can_ flash the DPE2 firmware for the N910W8 on the N910T, at least one developer, Ovrdrive, who tried it on his N910T said it wouldn't boot, and I haven't seen any posts here from anyone saying they got it to work on a N910T. So - any brave soul who tried DPE2 on his N910T and made it work should post about his success here.
gun26 said:
No need to wait, the latest cf-auto-root from chainfire works fine on 6.0.
---------- Post added at 11:47 PM ---------- Previous post was at 11:41 PM ----------
Actually the DPE2 firmware is posted as a zip, but once you unzip your download (which is over 2 GB in size, btw!) you will have a .tar.md5 file that you flash with Odin in the usual way.
As for the question of whether you actually _can_ flash the DPE2 firmware for the N910W8 on the N910T, at least one developer, Ovrdrive, who tried it on his N910T said it wouldn't boot, and I haven't seen any posts here from anyone saying they got it to work on a N910T. So - any brave soul who tried DPE2 on his N910T and made it work should post about his success here.
Click to expand...
Click to collapse
NO it will not work on the 910T. not through Odin anyways as the model number won't match. Sefrcoko is working on a flashable zip and deodexing but at the moment is having issues with deodexing so it may work through flashing in recovery with a MM kernel. We will have to wait and see
gun26 said:
Actually the DPE2 firmware is posted as a zip, but once you unzip your download (which is over 2 GB in size, btw!) you will have a .tar.md5 file that you flash with Odin in the usual way.
.
Click to expand...
Click to collapse
Not for me. I downloaded it using SamFirm (as mentioned earlier), and set to "Decrypt Automatically. It completed as a Zip file that would not unzip. Perhaps it was corrupt. ?
Pinan said:
Not for me. I downloaded it using SamFirm (as mentioned earlier), and set to "Decrypt Automatically. It completed as a Zip file that would not unzip. Perhaps it was corrupt. ?
Click to expand...
Click to collapse
I've never used Samfirm. I was talking specifically about the zip files posted at sammobile (link for the N910W8 version in my previous post), which are intended to be unzipped to a .tar.md5 and flashed with Odin.
NIKKOTUASON said:
Anyone else having problems with ALL other ROMs not booting up after upgrading to N910W8VLU1DPE2?
Click to expand...
Click to collapse
Same here! Upgraded to mm and can't boot to overrides s7 port or my v15 restore and when it does boot, its missing wifi????
Tried different mm kernels but it never gets past the android is upgrading screen
BTW, Im re rooted and supersu installed.
gun26 said:
No need to wait, the latest cf-auto-root from chainfire works fine on 6.0.
Click to expand...
Click to collapse
which one?
the one on their website for the W8 says 5.1.1...
dsac said:
which one?
the one on their website for the W8 says 5.1.1...
Click to expand...
Click to collapse
That one works. Same one I used for 5.1.1 is the one I used for 6.0.
kidhertz said:
Same here! Upgraded to mm and can't boot to overrides s7 port or my v15 restore and when it does boot, its missing wifi????
Tried different mm kernels but it never gets past the android is upgrading screen
BTW, Im re rooted and supersu installed.
Click to expand...
Click to collapse
I assume that since you upgraded to MM, and T-Mobile has yet to ship MM, you have a N910W8 and you installed DPE2. It's the bootloader that came with DPE2 that is the problem. All the custom ROMs, even the MM port ones, are intended for the most recent T-Mobile bootloader, which is DOK2 Lollipop 5.1.1, or the most recent Canadian equivalent, COK3 Lollipop 5.1.1. When and if T-Mobile finally, FINALLY ships their version of MM, the custom ROMs here will probably be based on that bootloader instead. T-Mo and Samsung should be ashamed about how long MM is taking. Verizon has it. EVERY Canadian carrier has it. Looks like T-Mo is shooting for the distinction of being the very last carrier anywhere to ship MM.
Anyway, until then you need to use Odin to downgrade to COK3 (or, at least the COK3 bootloader) before any currently available custom ROMs will boot.
I have the latest firmware (G930PVPS4APJ2) but I want to root my phone. Is there anyway to root on this firmware/bootloader? Or are there instructions to downgrade?
loraxnope said:
I have the latest firmware (G930PVPS4APJ2) but I want to root my phone. Is there anyway to root on this firmware/bootloader? Or are there instructions to downgrade?
Click to expand...
Click to collapse
On the latest firmware the easiest thing I've found is to flash Echoe. When I rooted apj2 I couldn't get my data sms working even having my msl all the Apns I set wouldn't stick
vegoja said:
On the latest firmware the easiest thing I've found is to flash Echoe. When I rooted apj2 I couldn't get my data sms working even having my msl all the Apns I set wouldn't stick
Click to expand...
Click to collapse
So when you flashed the rom did everything work then? And was you rooted running Echoe rom on pj2?
joedaddyoo said:
So when you flashed the rom did everything work then? And was you rooted running Echoe rom on pj2?
Click to expand...
Click to collapse
Not exactly but I am on the latest firmware it just happens to be from Verizon not sprint but everything works just fine except native Hotspot
vegoja said:
Not exactly but I am on the latest firmware it just happens to be from Verizon not sprint but everything works just fine except native Hotspot
Click to expand...
Click to collapse
Well there isn't a stable root for PJ2 I did a guide on rooting that you might want to check out. I explain how to get back to PE1 before rooting, and in the method it shows how to get data and sms back easily.
http://forum.xda-developers.com/galaxy-s7/how-to/samsung-galaxy-s7-sm-g930p-root-xposed-t3502829
I also made a tethering mod method if you would like to check that out.
http://forum.xda-developers.com/galaxy-s7/how-to/root-tether-free-android-t3503698
Is pj2 on bootloader v4? If that's the case, he will need a pit file to downgrade to a lower firmware
Sent from my SM-G930U using XDA-Developers mobile app
epicman_1200 said:
Well there isn't a stable root for PJ2 I did a guide on rooting that you might want to check out. I explain how to get back to PE1 before rooting, and in the method it shows how to get data and sms back easily.
http://forum.xda-developers.com/galaxy-s7/how-to/samsung-galaxy-s7-sm-g930p-root-xposed-t3502829
I also made a tethering mod method if you would like to check that out.
http://forum.xda-developers.com/galaxy-s7/how-to/root-tether-free-android-t3503698
Click to expand...
Click to collapse
So you can downgrade from v4 that's great news echoe is a good rom just more customization than I need and would like to get the best performance possible
epicman_1200 said:
Well there isn't a stable root for PJ2 I did a guide on rooting that you might want to check out. I explain how to get back to PE1 before rooting, and in the method it shows how to get data and sms back easily.
http://forum.xda-developers.com/galaxy-s7/how-to/samsung-galaxy-s7-sm-g930p-root-xposed-t3502829
I also made a tethering mod method if you would like to check that out.
http://forum.xda-developers.com/galaxy-s7/how-to/root-tether-free-android-t3503698
Click to expand...
Click to collapse
Hey! So just so I'm clear, I can follow your guide and it should work, even if I'm on PJ2 right now? Do I need a pit file like lvpre mentioned?
epicman_1200 said:
Well there isn't a stable root for PJ2 I did a guide on rooting that you might want to check out. I explain how to get back to PE1 before rooting, and in the method it shows how to get data and sms back easily.
http://forum.xda-developers.com/galaxy-s7/how-to/samsung-galaxy-s7-sm-g930p-root-xposed-t3502829
I also made a tethering mod method if you would like to check that out.
http://forum.xda-developers.com/galaxy-s7/how-to/root-tether-free-android-t3503698
Click to expand...
Click to collapse
I didn't think you could get back to PE1 from PJ2 just by flashing the PE1 firmware. I also did not see where you explained how to get Voice and SMS back (possibly not needed if you are coming from PE1). Is this info included in the download (dropbox is preventing download because you're soo popular ) or does the XTether mod fix this issue?
I have heard that flashing the Echoe Rom from PE1 fixes most issues.
Downgrading to PE1
loraxnope said:
Hey! So just so I'm clear, I can follow your guide and it should work, even if I'm on PJ2 right now? Do I need a pit file like lvpre mentioned?
Click to expand...
Click to collapse
Yes you can start on PJ2 Firmware, however before you start rooting process you have to be on PE1. My guide includes how to get back down to PE1 before you start rooting. You can use Odin and the firmware included to flash you Samsung completely back to PE1. The only reason you can't use PJ2 is because it has updated PRL's and they wont allow you to reactivate your service, therefore to reactivate your phone service you have to be on PE1 Firmware using the older PRL's.
I do not know anything about a pit file, I have done this process many times with no problem. The reason I've done it so many times is to test out its success rate, and every time I've done it, the method gets easier to do, and it works 100% of the time.
---------- Post added at 06:30 AM ---------- Previous post was at 06:26 AM ----------
jakemastaflash said:
I didn't think you could get back to PE1 from PJ2 just by flashing the PE1 firmware. I also did not see where you explained how to get Voice and SMS back (possibly not needed if you are coming from PE1). Is this info included in the download (dropbox is preventing download because you're soo popular ) or does the XTether mod fix this issue?
I have heard that flashing the Echoe Rom from PE1 fixes most issues.
Click to expand...
Click to collapse
As it says in the post, I did not create this method, I simply make it easier to follow. How to get sms and calling back is in the link reference under the subtitle "4.Rooting:". He shows how to root the device and then get everything working. He just doesn't explain the setup,how to install Xposed, and he does not show how to get back to PE1 so that's what I've done with my post, is just make it easier to follow.
SIDE NOTE: Service and sms is very easy to get back on PE1 I tried many times to do it on PJ2 using different methods, the PRL just wouldn't allow me to activate my device.
When I tried this method it said pit fail immediately in Odin. I tried adding the pit file but it still failed
just tried it too. Same result. execept i didn't try with a PIT. think you could provide it for me? @vegoja
The Android Attorney said:
just tried it too. Same result. execept i didn't try with a PIT. think you could provide it for me? @vegoja
Click to expand...
Click to collapse
Yes one sec I think I have it on mega
vegoja said:
When I tried this method it said pit fail immediately in Odin. I tried adding the pit file but it still failed
Click to expand...
Click to collapse
Hmm. Ok. Can you tell me your variant of Samsung Galaxy S7. Like what service provider, Snapdragon or Exynos?
and did you use the files directly from my drop box link?
Did you run Odin as admin?
Does the Odin exe file say "Odin PrinceComsy.exe" and you also have to "Odin3.ini" config settings?
Maybe this post will help.
http://forum.xda-developers.com/galaxy-s7/how-to/collection-firmware-rom-pit-files-t3326707
Pit file
https://mega.nz/#!EIxXEKoC
---------- Post added at 07:53 AM ---------- Previous post was at 07:50 AM ----------
epicman_1200 said:
Hmm. Ok. Can you tell me your variant of Samsung Galaxy S7. Like what service provider, Snapdragon or Exynos?
and did you use the files directly from my drop box link?
Did you run Odin as admin?
Does the Odin exe file say "Odin PrinceComsy.exe" and you also have to "Odin3.ini" config settings?
Click to expand...
Click to collapse
930P snapdragon sprint, your Dropbox link is down but I have the firmware saved, yes I ran Odin as admin and yes I have the princecomsy Odin, and I'll have to check my config settings
---------- Post added at 08:03 AM ---------- Previous post was at 07:53 AM ----------
Sorry for the bad link this one should work
https://drive.google.com/file/d/0B1sf5JWVwnK6MlFBMXNWXzJieE0/view?usp=drivesdk
.,hhj
The Android Attorney said:
WOOOWW!!!! IT WORKED!! i used the PIT this time and it worked.
@vegoja @epicman_1200
Click to expand...
Click to collapse
That's awesome I wonder what I'm doing wrong
vegoja said:
That's awesome I wonder what I'm doing wrong
Click to expand...
Click to collapse
i feel like such an ahole now. i mistakenly chose from the PJ2 directory...
The Android Attorney said:
i feel like such an ahole now. i mistakenly chose from the PJ2 directory...
Click to expand...
Click to collapse
LOL it happens I've done the same thing a few times
vegoja said:
Pit file
https://mega.nz/#!EIxXEKoC
---------- Post added at 07:53 AM ---------- Previous post was at 07:50 AM ----------
930P snapdragon sprint, your Dropbox link is down but I have the firmware saved, yes I ran Odin as admin and yes I have the princecomsy Odin, and I'll have to check my config settings
---------- Post added at 08:03 AM ---------- Previous post was at 07:53 AM ----------
Sorry for the bad link this one should work
https://drive.google.com/file/d/0B1sf5JWVwnK6MlFBMXNWXzJieE0/view?usp=drivesdk
Click to expand...
Click to collapse
Hey do you mind if i use your pit link and add it to my guide in case other users get stuck here too?
https://www.sammobile.com/firmwares/database/SM-G925F/
Android 7.0 for S6 Edge
Can we flash this rom for 925i?
Can I flash it on 925i?
If we flash it on g925i can we root by chainfire's cf autoroot?
Can i flash it directly over the existing 6.0.1 fw? Will the knoxx flag trigger in this case?
Dirrtydog said:
Can i flash it directly over the existing 6.0.1 fw? Will the knoxx flag trigger in this case?
Click to expand...
Click to collapse
No guarantees it will flash properly. It depends on the size of the hidden partition. I would wait for a debranded firmware like BTU or XEU.
Rom S6 Edge deodexed nougat 7.0
https://forum.xda-developers.com/galaxy-s6-edge/development/rom-s6-edge-nougat-7-0-t3570218
Dirrtydog said:
Can i flash it directly over the existing 6.0.1 fw? Will the knoxx flag trigger in this case?
Click to expand...
Click to collapse
not safe just wait it will get messy and you wont be able to update correctly.
Can anyone please some screenshots, if you have already updated your device?
ImAnurag said:
Can anyone please some screenshots, if you have already updated your device?
Click to expand...
Click to collapse
please i am still waithing too.BTU.
Any Faster download links?
Anyone confirm it works with cf auto root? If not im stayin on 6.0.1
Live for most G925F's, none listed yet for G925I, but i haven't had a problem on my G925I running it, very smooth, very fast, new keyboard is ugly af tho
source: http://updato.com/firmware-archive-select-model?q=g925f&v=Nougat(Android+7.0)&exact=1
boltron said:
Live for most G925F's, none listed yet for G925I, but i haven't had a problem on my G925I running it, very smooth, very fast, new keyboard is ugly af tho
source: http://updato.com/firmware-archive-select-model?q=g925f&v=Nougat(Android+7.0)&exact=1
Click to expand...
Click to collapse
Bro did u flash complete firmware or skipped CSC??
Can the firmware be flashed over 925I model?? Since the hardware is same I guess it shouldn't be a problem??
Thanks for your input @ joecool666 and @lynxblaine.
This morning I just received the 7 OTA on my device and is installing as we speak. It's aprox 200MB smaller than on the S7e (i'm on S6e).
For anyone interested.. I flashed this last night.. but it FAILED on hidden partition... had to emergency repair it. I'm using g925f in the UK on Vodafone..
Edit...
I flashed the UK Vodafone from sammobile
can i flash it with odin or i must install twrp recovery first?
has anyone tried secure folder app ?
I've installed it from Sammobile but it does not run saying "unauthorised"
I made a video of all the new features and the whole new design with nougat
if anybody is interested here you go
i know its the flat version but the firmwares are quite similar
https://www.youtube.com/watch?v=X3EnwrwvFmY
TimurAlaskara_TR said:
I made a video of all the new features and the whole new design with nougat
if anybody is interested here you go
i know its the flat version but the firmwares are quite similar
Click to expand...
Click to collapse
I saw it before yo write thus comment hahaha great vid
mrmrmrmr said:
has anyone tried secure folder app ?
I've installed it from Sammobile but it does not run saying "unauthorised"
Click to expand...
Click to collapse
Yes, I did try it but was unsuccessful to run the app.
Of course, because knox was tripped.
---------- Post added at 06:06 AM ---------- Previous post was at 06:00 AM ----------
JAMIE1000UK said:
For anyone interested.. I flashed this last night.. but it FAILED on hidden partition... had to emergency repair it. I'm using g925f in the UK on Vodafone..
Edit...
I flashed the UK Vodafone from sammobile
Click to expand...
Click to collapse
Maybe you need to remove hidden.img.
---------- Post added at 06:11 AM ---------- Previous post was at 06:06 AM ----------
[/COLOR]
xRaska said:
can i flash it with odin or i must install twrp recovery first?
Click to expand...
Click to collapse
Flash it with Odin. Why would you install TWRP for the purpose of updating to Nougat Official?
Does not make sense. Hence, good luck and happy flashing official OS 7.
:laugh:
---------- Post added at 06:12 AM ---------- Previous post was at 06:11 AM ----------
adie1234 said:
Anyone confirm it works with cf auto root? If not im stayin on 6.0.1
Click to expand...
Click to collapse
No one can confirm for the moment.
But there are already reports saying that they flash TWRP and Magisk for root then installed Magisk Manager from Play Store.
I finally cracked it!!! after about 1700 hours of research amd development on the original Note 7 Snapdragon variant, here isis the firmware tbat will save your note 7 from the last death update. Flash this through odin just like normal and your note 7 will now charge to 100% and will be fully functional. Unfortunatley the wifi and bluetooth are disabled but i am working tirelessly on fixing the wifi and bluetooth and will post the fix on this thread when it is acheived. Feel free to donate if you wish, i spent a TON of time on this and will always appreciate your generosity. Paypal : [email protected] Enjoy!
https://www.alliancex.org/viewtopic.php?f=44&t=2652
Works with s L K versions?
translpro said:
Works with s L K versions?
Click to expand...
Click to collapse
Have not been tested on those models but as long as its snapdragon it should work....maybe just try flashing the boot image to start, if it flashes in, then you're good to go!
You flashed it with frp lock on or off?
translpro said:
Works with s L K versions?
Click to expand...
Click to collapse
K and L versions are Exynos based. Will not works.
translpro said:
You flashed it with frp lock on or off?
Click to expand...
Click to collapse
It doesn't matter if its on or off, the note 7's frp is easily hacked if you don't know the last emails identity or password. The only thing that matters is the fact that this will only work for snapdragon, sorry enynos
This isn't something I need but congrats. Nice work!
Is the firmware official? What binary version? Can I install recovery and system for exynos model?
translpro said:
Is the firmware official? What binary version? Can I install recovery and system for exynos model?
Click to expand...
Click to collapse
It is all official, flashable firmware, rev 3, unfortunately this is a Qualcomm exclusive firmware, for exynos just flash twerp, root your n7 and flash hydra rom, easy peasy
akiraO1 said:
It is all official, flashable firmware, rev 3, unfortunately this is a Qualcomm exclusive firmware, for exynos just flash twerp, root your n7 and flash hydra rom, easy peasy
Click to expand...
Click to collapse
My problem is frp lock
---------- Post added at 07:08 PM ---------- Previous post was at 06:51 PM ----------
akiraO1 said:
It is all official, flashable firmware, rev 3, unfortunately this is a Qualcomm exclusive firmware, for exynos just flash twerp, root your n7 and flash hydra rom, easy peasy
Click to expand...
Click to collapse
My problem is frp
how can i get this back to sprint rom or anything? after this nothing will pass in odin
solomon711 said:
how can i get this back to sprint rom or anything? after this nothing will pass in odin
Click to expand...
Click to collapse
there currently is no rev 3 sprint firmware in existance.
this is the stock N930W8 firmware, modified to charge to 100%. i have tracked down the stock rev 3 verizon firmware amf modified it to charge to 100% and on this firm the wifi and bluetooth are fixed. PM me if you need the modified verizon firmware, im sharing it for $30 per person.
No cure for exynos models?
translpro said:
My problem is frp lock
---------- Post added at 07:08 PM ---------- Previous post was at 06:51 PM ----------
My problem is frp
Click to expand...
Click to collapse
http://www.techoxygen.com/bypass-factory-reset-protection-on-samsung-galaxy-phone/
click on this link, this method works on the note 7, personally tested, enjoy
Compatible with N9300 HK Snapdragon version?
Sansedor007 said:
Compatible with N9300 HK Snapdragon version?
Click to expand...
Click to collapse
Not tested with the Chinese model, but it may work. Also on a side note, I have found permanent root for all Qualcomm Note 77s Canadian amd American variants. I'll be posting a huge 'how to do' post on xda somewhere, follow my work.
Link not working please update working links..
Thanks in Advance..
links have been updated
Cant get APN to change
Hi thanks alot for the fix its a miracle of god
However in your readme it says to get mobile services to reconfigure APN , it wont let me to that however so I cant connect to Bell network I'm from canada.
Thanks for any help or answers
I have N930T Tmobile Variant .. will this fix work for this model ... and wifi and bluetooth will also work ?
Link remove
Link is up .. Enjoy!!!
This is new odin version and not comsy right? Comsy is only for unlocked firmware, is that correct?
Sent from my SM-N950U using Tapatalk
Needs at least ODIN 3.12.10 to flash
So does this just restore back to Full AT&T with all the bloat crap -- or is it without ATT bloat?
I assume VoLTE and WiFi Calling work ??
jcrompton said:
So does this just restore back to Full AT&T with all the bloat crap -- or is it without ATT bloat?
I assume VoLTE and WiFi Calling work ??
Click to expand...
Click to collapse
Will restore full official Stock AT&T and wipe your data.
Sent from my Samsung Galaxy Note8 using XDA Labs
Can you flash this on the carrier unlocked.
DanMc85 said:
Needs at least ODIN 3.12.10 to flash
Click to expand...
Click to collapse
Where did you get the ODIN 3.12.10 from I can't find it anywhere?
Sent from my SM-N950U1 using XDA-Developers Legacy app
ahenderson223 said:
Where did you get the ODIN 3.12.10 from I can't find it anywhere?
Sent from my SM-N950U1 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Google is best search engine. If you type in in Google search " Download Odin 3.12.10" you will get results in mater on seconds.
I don't think there is odin 3.12.10, last one official is 3.12.7 and is here : https://thedroidguru.com/download-latest-odin-odin3-all-versions-full-collection/
borijess said:
Can you flash this on the carrier unlocked.
Click to expand...
Click to collapse
Did you purchase unlock version of Note 8 or you sim unlock with code?
borijess said:
Can you flash this on the carrier unlocked.
Click to expand...
Click to collapse
Just following up on this request. I purchased international unlocked both sim and bootloader.
Right now my ATT sim works in my SM-950F/DS. But I think its not getting 4GLTE.
I'm hoping for a CSC flash for this international version, but if a stock ATT flash will work as well, then I'll do that.
Yes hoping to keep dual-sim capability with GoogleFI.
Carrier unlocked from Samsung.
borijess said:
Carrier unlocked from Samsung.
Click to expand...
Click to collapse
Then flashing this firmware is not best idea since this is 100 % At&T firmware
Sent from my SM-G955U using XDA Premium HD app
do we need the CSC edit tool found in the zip file?
Update: Why am i getting the Tmobile firmware when i flash this?
daraj said:
do we need the CSC edit tool found in the zip file?
Update: Why am i getting the Tmobile firmware when i flash this?
Click to expand...
Click to collapse
If you get other carrier files when flashing a different carrier version...you can follow the switching carrier guide in the main guide section to ensure ATT code...
---------- Post added at 05:58 AM ---------- Previous post was at 05:55 AM ----------
borijess said:
Carrier unlocked from Samsung.
Click to expand...
Click to collapse
This firmware, as well as any carrier firmware, can be flashed on unlocked devices - SM-N950U1...
---------- Post added at 05:58 AM ---------- Previous post was at 05:58 AM ----------
norbarb said:
Then flashing this firmware is not best idea since this is 100 % At&T firmware
Click to expand...
Click to collapse
This firmware, as well as any carrier firmware, can be flashed on unlocked devices - SM-N950U1...and is the best option for users that wish to gain full use of carrier features....your reply is not 100% accurate...☺
Is this the latest release for AT&T ?.
jawonder said:
Is this the latest release for AT&T ?.
Click to expand...
Click to collapse
No Latest is QIA
Running On Samsung Galaxy Note 8 Wicked Venom
it sucks when you stuck on kernel panic try to root it and now cant use phone at all.
BlueFox721 said:
If you get other carrier files when flashing a different carrier version...you can follow the switching carrier guide in the main guide section to ensure ATT code...
---------- Post added at 05:58 AM ---------- Previous post was at 05:55 AM ----------
This firmware, as well as any carrier firmware, can be flashed on unlocked devices - SM-N950U1...
---------- Post added at 05:58 AM ---------- Previous post was at 05:58 AM ----------
This firmware, as well as any carrier firmware, can be flashed on unlocked devices - SM-N950U1...and is the best option for users that wish to gain full use of carrier features....your reply is not 100% accurate...
Click to expand...
Click to collapse
I have the N950N (korean) model. I want to use the carrier firmware on my phone but I'm worried doing so will irreversibly lock my bootloader.
Kul_dood said:
I have the N950N (korean) model. I want to use the carrier firmware on my phone but I'm worried doing so will irreversibly lock my bootloader.
Click to expand...
Click to collapse
It could brick your phone that model has a different cpu than the AT&T model
Sent from my SM-N950U using Tapatalk