Related
Hi Guys,
I've been searching but couldn't find info on this head unit. It looks like they upgraded the screen to 7" 1024x600 on an older dual core 1.6Ghz RK3066 to make a universal 2DIN unit. It seems to be a recently released model, looks like a nice unit for a good value.
Does anyone have this HU or know about it? Hotaudio seems to be the original manufacturer, is there a better known clone of this unit?
All I can find searching for "Hotaudio 2100" are some posts on a Russian forum:
https://www.drive2.ru/l/7069581/
https://www.drive2.ru/l/7031068/
They're on Aliexpress and Ebay:
http://www.aliexpress.com/item/Dual...ole-size-176mm-101mm-No-disc/32342857044.html
http://www.ebay.com/itm/1024-600-An...mm-176mm-7-inch-navi-radio-wifi-/251948090321
Any info or ideas?
Hi. This Hotaudio RK3066 - 1024X600 HU is considered a HuiFei type, so check out the thread below for more info:
http://forum.xda-developers.com/showthread.php?t=2660662
Here's another thread on this specific HA HU that could help too:
http://forum.xda-developers.com/and...in-s07-android-4-4-using-rk3066-root-t3155372
Also, below's a link to Malaysk's Custom Rk3066 - 1024X600 ROM Images that have worked well for me with this HU:
http://forum.xda-developers.com/showpost.php?p=58249825&postcount=7614
And here's a link the MCU images for BN-HA RK3066 / RK3188 specific models:
http://forum.xda-developers.com/showpost.php?p=61291848&postcount=14139
My opinion of this HA HU is that it's inexpensively made and not perfect. For example, I had to relocate the WiFi antenna out the back, as the factory location inside of the unit created a very weak signal. To clarify, moving the antenna lead out the back of the unit increased throughput up and down by at least 10x + on my unit. Moreover, my HA HU also has an input switching issue with my vehicle's factory amp that creates a single loud popping sound through the speakers when switching from music to radio inputs or when turning the vehicle off. That said, this issue was not present at all with a prior Winmark Android HU in the same vehicle. I even installed a RCA ground loop isolator - noise filter and made sure the ground was to chassis, but the input switching loud single popping sound is still a problem with this HU. I'm guessing it's an issue with how crudely this HU the switches power, which is unlike the soft power switch and volume ramp up of my last Android HU.
Another issue with many of these Android type head units including this one is the boot up time. It's at least 20-30 seconds, but you can set the HU shut down time delay up to two hours. Still, it's not equal to having an any time almost instant on HU like my last one.
All the above said, this HU is decent if you can find it for around $200 US, but I'd recommend going with something of higher quality if cost is not a big concern, or at the least look for one of these units or similar ones with the quad core RK3188 processor and good support.
Bottom line is that these units are inexpensively made IMHO, but they can be fun to work with; thanks to Malaysk and all the excellent XDA developers and contributors. Plus, I still have not found any higher quality brand names to date that run pure android, OBD2, and have as many other app options available.
Best to all,
R
Thanks a lot for your informative post rhacy.
My unit just came in and I was wondering if this was the WiFi antenna you relocated out the back?
There seems to be an adhesive copper antenna tab taped to the inside of the chassis near the screen at the front of the unit. If you route it out the back wouldn't it put the antenna further away from the seats where you'd want the stronger WiFi signal? Was the stock placement of your antenna the same way?
Your previous Winmark HU with the instant boot up time was a Windows CE unit with Android running in a VM, or was it pure Android? I've seen the option in xdAuto firmware for the Carpad HUs to set sleep delay for 1day, 2days so it will instantly boot as long you drive every few days. I wonder if we can do that on these HuiFei units somehow?
I've seen mention in the changelog of an adapter that addresses factory amp pop by introducing a delay before switching the input, at least during turn-on. Maybe using an adapter like this might address the issue?
http://www.pac-audio.com/firmware/RP/RP4-CH11.html
Release Notes for RP firmware
2/13/2015 Rev 1.5.4.4:
Adds Fusion
Separates Sony & Pioneer
Adds Alpine VR command
Factory amp turn-on delay slightly longer to avoid turn-on pop
Fixes LED problem without proper radio selection
Click to expand...
Click to collapse
Do you have Steering Wheel Controls working with your unit? Does your vehicle have resistive controls or canbus?
I'm going to hook mine up to power and test it out, will report any issues to this thread. Anyone who has one of these Hotaudio model 2100 please post your experience.
Hi rcll,
Your more than welcome and thank you for the heads up and link for an adapter that addresses factory amp pop by introducing a delay before switching the inputs, at least at amp turn on. Cheers!
Here's a link to one I found on ebay that looks like it may work in some instances:
http://www.ebay.com/itm/PAC-TR-4-Ca...gger-Module-/191226517960?hash=item2c85fd19c8
Moreover, I'll do some more research and try to find an adapter that can sense any input switch and soft switch the amp. Well... I will if the new Android HU I just purchased has the same single loud popping sound when switching inputs or turning off. The new HU is a Joying JY-UQ124 Quad Core RK3188 1024*600 16GB 2 DIN system. It was purchased because I missed having an actual volume knob and wanted to upgrade to a quad core as well as see if it would fix the loud single pop sound issue.
Please note that I have emailed Hotaudio multiple times over the last month or so about the loud single pop sound issue when switching audio inputs etc., and Summer has stated that they are working on the problem and will send me a fix if and when they figure it out.
Also, if it helps at all, the Hotaudio HU is installed currently in a 2003 Mitsubishi Montero Limited with the factory infinity amp, 6 speakers, and a Polk sub-woofer. It's a non CANbus and non SWC SUV. As I mentioned in my previous post, there were zero single loud popping noise issues with the Winmark Android HU that I installed in the Montero prior this HA HU. The Winmark has a gentle audio input switching and a nice soft volume ramp up on any input including the radio. It was listed as a Pure Android Single DIN HU with the pop out 7" 1024x600 display and it has worked well. I only replaced it because I did not like how far it stuck out of the dash even with the display in. Plus, the display had to pop out in order for me to see my reverse camera or access my nav apps and that got old real fast. Also, I was concerned that the display motor or its ribbon cable would fail eventually.
Here's a link to Winmark Pure Android 4.1 Single DIN HU:
http://www.alibaba.com/product-detail/Pure-Android-4-1-universal-1_60150935774.html
To clarify further, the Winmark Pure Android HU is instant on when using the android music player or radio, but it does take 10 seconds for the display to pop out and up. That said, I'm guessing that there must be a sleep or standby mode for the Mstar system that Rockchip does not deploy. Plus, I know for sure that the Mstar system does not need to boot up even when the Montero has sat for days or weeks without use.
In regard to the Hotaudio WiFi Antenna, yes, mine was in the exact same spot originally. However, mine did not come with an adhesive copper antenna tab at the end of the antenna lead on the side of the case. It was just soldered to the inside sidewall of case. Your unit may perform better with the copper tab, although, I think there will still be more interference due to the antenna lead being inside the case. On mine, the difference between the factory mounting location and the lead being routed out the back (through the rear mounting bracket hole and then attached to center upper rear housing screw) has been a massive improvement in both signal strength and throughput. If I was not pressed for time during the antenna fix, I would have taken pictures as well as mounted a RP-SMA Antenna on the back housing like the one in the link below.
2.4G 2.5dBI Wireless RP-SMA Antenna with Extension Cord Cheap hot sale
http://www.ebay.com/itm/171505160014?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT
Further, I did ask Hotaudio for help with the ridiculously weak wifi signal and directly related low throughput issue, but they only suggested using a USB WiFi adapter instead of the internal WiFi radio. D'oh! And even then, there was no information on which adapter would work, or how to set it up, where to get the drivers, or where to get it. In turn, I pulled the HU, relocated the antenna lead, and tried to explain to them the poor factory antenna location problem. This was more than a month ago, so hopefully they are doing a better job on new units. Please note, my Winmark HU has the WiFi antenna routed out the back and it works great. Also, the forthcoming Joying HU routes the antenna out the back too, so hopefully it will work great as well. Anyway, if you're bench testing your HU prior to install, you can at least test the signal strength and throughput and compare it to your phone etc., and then decide if you need to reroute or not. Although, if you like to connect to home or work WiFi networks, I'd recommend relocating and upgrading the antenna.
Yikes... my apologies for type rambling...
Best to all,
R
rhacy said:
My opinion of this HA HU is that it's cheaply made and far from perfect. For example, I had to relocate the WiFi antenna out the back, as the factory location inside of the unit was poorly designed to save a few cents per unit. To clarify, moving the antenna lead out the back of the unit increased throughput up and down by 10x + on my unit. Moreover, my HA HU also has an input switching issue with my vehicle's factory amp that creates a single loud popping sound through the speakers when switching from music to radio inputs or when turning the vehicle off. That said, this issue was not present at all with a prior Winmark Android HU in the same vehicle. I even installed a RCA ground loop isolator - noise filter and made sure the ground was to chassis, but the input switching loud single popping sound is still a problem with this HU. I'm guessing it's an issue with how crudely this HU the switches power, which is unlike the soft power switch and volume ramp up of my last Android HU.
Click to expand...
Click to collapse
Did you ever solve the popping sound before you switched to the Joying? This is my second HotAudio unit, my first one had a power issue. They sent me a new one at no cost, but this has the speaker popping as you described. My first one did not have this issue. And no word from Summer yet. I really don't want to go through the hassle of shipping this one back and waiting another 2 weeks for a new one. Frustrating.
vdubskey said:
Did you ever solve the popping sound before you switched to the Joying? This is my second HotAudio unit, my first one had a power issue. They sent me a new one at no cost, but this has the speaker popping as you described. My first one did not have this issue. And no word from Summer yet. I really don't want to go through the hassle of shipping this one back and waiting another 2 weeks for a new one. Frustrating.
Click to expand...
Click to collapse
Hi vdubskey,
No... I haven't solved the Hotaudio single loud popping sound when switching audio inputs or turning off yet. On an encouraging note, Summer sent me a link to new ROM and MCU images yesterday should fix the single loud audio popping sound. I'm guessing the fix is in updated MCU audio switching assembly code, but I've already installed the Joying HU and it's been working great for the most part. To clarify, out of the box the Joying HU has zero audio pop issues, decent WiFi throughput, and is obviously faster due to the quad core. The only issue with it so far is low mic volume and some background buzzing noise for the person on the receiving end of my Bluetooth paired phone calls. D'oh! There always seems to be some issue with these head units.
Anyway, if Summer has not sent you the download link to the New4_rk3066_h(20150831) ROM & MCU images yet, you can pm me for the link. Please note that I'm going to email Summer and will post the link and password here if she gives me permission to do so.
Best to all,
R
I also bought this model and with the latest files from Summer, I noticed that the input pop sounds went away : ). Super happy about that
It is too bad I have to stick with the files from HotAudio/Summer so I won't have the popping sounds. This also means I won't be able to install the Malaysk's current custom rom as you will hear the popping sounds
butthead123 said:
I also bought this model and with the latest files from Summer, I noticed that the input pop sounds went away : ). Super happy about that
It is too bad I have to stick with the files from HotAudio/Summer so I won't have the popping sounds. This also means I won't be able to install the Malaysk's current custom rom as you will hear the popping sounds
Click to expand...
Click to collapse
I have this same HU and it has been nothing short of perfect for me. Try and update the MCU to the new (20150831) HA file and then put in Malaysk's ROM. The popping sound should be MCU related not ROM so you shouldn't have any problems.
I personally haven't updated my MCU yet so I still have that popping sounds, only the ROM to Malaysk's Aug24-2015 and it's running flawless. I bearly notice the pop anyways.
butthead123 said:
I also bought this model and with the latest files from Summer, I noticed that the input pop sounds went away : ). Super happy about that
It is too bad I have to stick with the files from HotAudio/Summer so I won't have the popping sounds. This also means I won't be able to install the Malaysk's current custom rom as you will hear the popping sounds
Click to expand...
Click to collapse
Great news. She just sent me a link with a firmware date of 09/09/2015 so hopefully it fixes it. Yea I appreciate all the work Malaysk has done but all of the UI changes done are not to my taste. The stock firmware looks much better IMO. I just extract the stock firmware images and rebuild with the modded apps I use and use then flash and apply *#hct#root# to root and install xposed and get the same experience with the same look as stock. Works for me [emoji6]
Sent from my Nexus 6 using Tapatalk
Summer at Hotaudio has given me permission to post the links below that should fix the single loud audio pop when switching inputs or when turning off.
Please note that these ROM Firmware images should be for 1024x600 Hotaudio Dual Core RK3066 & Quad Core RK3188 Head Units, but I haven't testing them yet, so use at your own risk.
Hotaudio Rockchip RK3066 8-31-15 ROM Firmware & MCU Images:
http://yunpan.cn/cm4nU7wHDzcuA password:2782
Hotaudio Rockchip RK3188 9-8-15 ROM Firmware & MCU Images:
http://yunpan.cn/cmtZjSvdtbqqv password:6389
Thanks in advance for any feedback.
R
Yup that's the firmware I downloaded, the 9/8/15 one. I upgraded to a quadcore SOM for this radio. I'll try the MCU image first and see if it solves my problem and then the UPDATE image if I need to. Should get these posted to the HuiFei file server as well. At least the MCU files anyways.
Sent from my Nexus 6 using Tapatalk
vdubskey said:
Yup that's the firmware I downloaded, the 9/8/15 one. I upgraded to a quadcore SOM for this radio. I'll try the MCU image first and see if it solves my problem and then the UPDATE image if I need to. Should get these posted to the HuiFei file server as well. At least the MCU files anyways.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Thanks! Please let us know if the single loud audio pop goes away or not. Also, once you flash the MCU, could you post the MCU version number for the new RK3188 MCU from your Settings - about section?
Moreover, once I know the both the new HA RK3066 and RK3188 MCU version numbers, I'll see if I or someone can post them to the HuiFei and mega.nz file servers - ( https://mega.nz/#F!KMZnXTJC!zDFMlP4qgxEE6vQxt8rrrw ), or if you do, please let us know.
Thanks again.
R
The MCU that was included in the 3188 download is v2.73. And that is what my system already had prior. I am still getting the pop randomly when switching music and radio apps. Although I haven't got the pop on boot or shutdown yet except a very tiny one that might have been related to something else. I'll have to do some more testing.
Sent from my Nexus 6 using Tapatalk
Hey guys, I am a total noob when it comes to dealing with these android head units. I am wondering if anyone can tell me if there is any way to have music (I.e. Mp3, radio, or other sources) to play continually, or at least while I am in the Nav app. Riding in silence just to use the Nav is not cool....
vdubskey said:
The MCU that was included in the 3188 download is v2.73. And that is what my system already had prior. I am still getting the pop randomly when switching music and radio apps. Although I haven't got the pop on boot or shutdown yet except a very tiny one that might have been related to something else. I'll have to do some more testing.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Yikes! I updated to MCU 2.73 on my HA rk3066 about month ago and still had the single loud audio pop when switching inputs or turning off. Regardless, thanks for posting the MCU version. It's probably a waste of time, but I'll bench flash the MCU included with latest rk3066 ROM from Summer to see if it's newer than 2.73.
Bigjoe1025 said:
Hey guys, I am a total noob when it comes to dealing with these android head units. I am wondering if anyone can tell me if there is any way to have music (I.e. Mp3, radio, or other sources) to play continually, or at least while I am in the Nav app. Riding in silence just to use the Nav is not cool....
Click to expand...
Click to collapse
Try going into Settings > GPS and selecting Mixing. There, you can also adjust the volume settings between your music and gps voice directions. Please note that this GPS volume setting may not work if you're using a GPS app with text to speech street names.
Hope this helps...
Best to all,
R
butthead123 said:
I also bought this model and with the latest files from Summer, I noticed that the input pop sounds went away : ). Super happy about that
It is too bad I have to stick with the files from HotAudio/Summer so I won't have the popping sounds. This also means I won't be able to install the Malaysk's current custom rom as you will hear the popping sounds
Click to expand...
Click to collapse
Hey can you post the version number of the MCU that took the pop away. Also the firmware date? Is your unit a dual core or quadcore. Thanks.
Sent from my Nexus 6 using Tapatalk
Update: I went ahead and flashed the update.img after the MCU.img had no effect and it has resolved the speaker popping. So it turns out the even tho the MCU probably does handle the input switching, it must have been how the OS handled the execution. No facts to back that up but just my opinion. Now I have to mod this version all over again and setup my apps but oh well.
Sent from my Nexus 6 using Tapatalk
vdubskey said:
Update: I went ahead and flashed the update.img after the MCU.img had no effect and it has resolved the speaker popping. So it turns out the even tho the MCU probably does handle the input switching, it must have been how the OS handled the execution. No facts to back that up but just my opinion. Now I have to mod this version all over again and setup my apps but oh well.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Thanks for posting that the latest Update Image from Summer at Hotaudio fixes the audio pop. I did bench load the included MCU for the HA rk3066. Unfortunately, it was version 2.60, so I knew it would not help. Thanks again for verifying the fix is the new firmware.
Cheers,
R
Another update: So the newest firmware fixes the pop when switching from radio to music and vice versa perfectly. Haven't had a pop yet. But I'm still getting a random pop here and there on ignition off. So I think I'm going to going to wire my DCDC-USB power supply in-between the unit and the battery so I can use the power off delay function to make sure my amp is powered off before the unit so I don't get the pop. Hopefully it works out.
Sent from my Nexus 6 using Tapatalk
Does anyone know how to get into recovery mode? This model doesn't have physical buttons but it still has the reset button. I tried going from maylask's to the original img. After flashing, it never booted successfully and now I'm stuck on the android logo screen. Any pointers ?
Please bear with me as im relatively new to all this, and just posted in the wrong forum. Sorry.
Ive got a unbranded chinese head unit, was working ok for two days, but then decided to boot to the blue wizzy android logo and no further. was running kk 4.4 as supplied. no upgrading or anything has been going on, just fitted to van and thats it. no fiddling!
Ive been trying all sorts of methods to get into recovery mode, as i assume this is what i need to do, but nothing works.
retailer is not helping and has refused a refund, Paypal also say im outside the 30 days cover offered, regardless of the fact i alerted the seller to the problems 3 days after i received the goods.
make and model are unknown.
here is a link the the unit.
ebay.co.uk/itm/141745211290?euid=f7c885aa6eed45d0a992a3f423a4cb9d &cp=1
Please, help.
Kind regards,
Phil
Ive now stripped the unit down.
the daughter board plugged into the main board is labelled as zx803 with a Allwinner A20 proc fitted.
*bump*
*bump*
Friends please help. I installed a headunit i bought from amazon
10.1 Inch 1024*600 Resolution HD Capacitive Multi-touch Screen,Pure run most recent, stable version, Android 4.4.4 kitkat OS; CPU: RK3188 1.6GHz Cortex A9 Quad Core
after installation, everything worked fine, then i went ahead to screw in all the screws and put the dash back, and I get a square and exclamation mark
the weird thing is that my phone does connect to the headunit via bluetooth
and when i go to shut down the car, i can see the homescreen and a popup box saying its shutting down.
mr_achtung I had a similar experience a couple of years ago with an older 2.3.4 (I think) unit. Went to great lengths to cut up the dash in my truck and squeeze this baby in--same case anyway as yours. It worked great for about 2 weeks and then without warning, it won't boot up (I just get a white screen) and can't figure out how to reset, enter recovery mode, reflash firmware etc.
I asked for help in here too and never got any response--I check back every few months. Sorry I can't actually help, but maybe it will be nice to know that your bad experience has made me feel better.
Try this
kenjiloc5 said:
Friends please help. I installed a headunit i bought from amazon
10.1 Inch 1024*600 Resolution HD Capacitive Multi-touch Screen,Pure run most recent, stable version, Android 4.4.4 kitkat OS; CPU: RK3188 1.6GHz Cortex A9 Quad Core
after installation, everything worked fine, then i went ahead to screw in all the screws and put the dash back, and I get a square and exclamation mark
the weird thing is that my phone does connect to the headunit via bluetooth
and when i go to shut down the car, i can see the homescreen and a popup box saying its shutting down.
Click to expand...
Click to collapse
I noticed on the Joying website blog that if the screws are tightened too much it can pinch some wires and cause the unit to not work. That's the gist of what they say, as it it difficult to understand the broken English. You might try loosen the screws or taking them out entirely and see if it works. If it does, just space them out with some washers to keep them from extending too far into the case. They use the term " screws from both sides of the car" but I'm sure that's what they mean.
kenjiloc5 said:
Friends please help. I installed a headunit i bought from amazon
10.1 Inch 1024*600 Resolution HD Capacitive Multi-touch Screen,Pure run most recent, stable version, Android 4.4.4 kitkat OS; CPU: RK3188 1.6GHz Cortex A9 Quad Core
after installation, everything worked fine, then i went ahead to screw in all the screws and put the dash back, and I get a square and exclamation mark
the weird thing is that my phone does connect to the headunit via bluetooth
and when i go to shut down the car, i can see the homescreen and a popup box saying its shutting down.
Click to expand...
Click to collapse
having same sort of problems with my unit, same chip set RK3188 and OS 4.4.4
when i do get it to power up after a while get desk top and a popup box saying its shutting down, after many attempts to reload the firmware, with the same problems, i come to the conclusion it's knackered.
will find out soon from suppler and factory if i have a nice door stop..
Got my Head unit from Pumpkin in Jun 2015. Had no major problems with it until December 2015. Drove for 4 hours with the head unit running TomTom with no problems. Went to use the car the next day and the headunit's screen was just black, the backlight was lit up and all features still worked. Poweramp would load up and start playing music off the SD card and I can get the radio to work. I can even change the station using the touchscreen.
This leads me to this it's the LCD that gone faulty. Just wondered if anyone has any idea I could try to fix it.
Been 3 months without the head unit now, so just wondered if anyone can think of something to check on the unit, or if anyone knows what screen it uses?
I've tried checking the connections for the board and the screen, but couldn't see any problems.
Specs of the unit are:
800x600
RK3066
Ram: 1GB
CPU: armv7 1.6GHz (x2)
MCU: MTCB-KLD2-V2.50
KLD
Thanks
fpscod said:
Got my Head unit from Pumpkin in Jun 2015. Fitted it to the car, Had the custom rom from on here had a reverse cam installed and had done the external mic fix.
Specs:
800x600
RK3066
Ram: 1GB
CPU: armv7 1.6GHz (x2)
MCU: MTCB-KLD2-V2.50
KLD unit
Had no major problems with it until December 2015. Drove for 4 hours with the head unit running TomTom with no problems. Went to use the car the next day and the headunit's screen was just black, the backlight was lit up and all features still worked. Poweramp would load up and start playing music off the SD card and I can get the radio to work. I can even change the station using the touchscreen.
This leads me to this it's the LCD that gone faulty. Just wondered if anyone has any idea I could try to fix it.
Been 3 months without the head unit now, so just wondered if anyone can think of something to check on the unit.
I've tried checking the connections for the board and the screen, but couldn't see any problems.
Thanks
Click to expand...
Click to collapse
Can you send the product's link? I want to know more about the product details before helping u.
fpscod said:
Got my Head unit from Pumpkin in Jun 2015. Had no major problems with it until December 2015. Drove for 4 hours with the head unit running TomTom with no problems. Went to use the car the next day and the headunit's screen was just black, the backlight was lit up and all features still worked. Poweramp would load up and start playing music off the SD card and I can get the radio to work. I can even change the station using the touchscreen.
This leads me to this it's the LCD that gone faulty. Just wondered if anyone has any idea I could try to fix it.
Been 3 months without the head unit now, so just wondered if anyone can think of something to check on the unit, or if anyone knows what screen it uses?
I've tried checking the connections for the board and the screen, but couldn't see any problems.
Specs of the unit are:
800x600
RK3066
Ram: 1GB
CPU: armv7 1.6GHz (x2)
MCU: MTCB-KLD2-V2.50
KLD
Thanks
Click to expand...
Click to collapse
Had the same problem with mine, this may sound stupid but have you tried the reset button. I pushed the reset on mine and the screen worked again when it rebooted, it has done this twice where I would lose the display but all else would work. I have reflased the rom and have not had the problem since.
the reset is a small hole on the front of the unit.
Paul2482 said:
Had the same problem with mine, this may sound stupid but have you tried the reset button. I pushed the reset on mine and the screen worked again when it rebooted, it has done this twice where I would lose the display but all else would work. I have reflased the rom and have not had the problem since.
the reset is a small hole on the front of the unit.
Click to expand...
Click to collapse
Hey Paul,
Have given it a go a few times. Did you press it whilst it was on? and for how long?
Also, what rom did you put on after?
Cheers!
Paul2482 said:
Had the same problem with mine, this may sound stupid but have you tried the reset button. I pushed the reset on mine and the screen worked again when it rebooted, it has done this twice where I would lose the display but all else would work. I have reflased the rom and have not had the problem since.
the reset is a small hole on the front of the unit.
Click to expand...
Click to collapse
Hey Paul,
Have given it a go a few times. Did you press it whilst it was on? and for how long?
Also, what rom did you put on after?
Cheers!
Pressed it when it was on, the unit should shut down and then restart. Rom I got from autopumpkin.com it's there stock rooted rom android 4.4.4 duel core
Paul2482 said:
Pressed it when it was on, the unit should shut down and then restart. Rom I got from autopumpkin.com it's there stock rooted rom android 4.4.4 duel core
Click to expand...
Click to collapse
Gave it another go but no luck. Thank for the suggestion though.
Currently awaiting (Since Jan) for a replacement screen from pumpkin. They have not been helpful.
Might give it a go at flashing the pumpkin rom without the screen on
Hi, Have a similar problem I have a Pumpin 10 4gb ram 32 rom. The screen is blank but the backlight work. I have no sound and nothing works, however, if I turn it off and on again every now and again I get something like Pumpkin 10 for a split second then the blank screen.
I tried the reset button a few times but nothing
Hi guys
I'm hoping to get some help from you with deciding head unit for my Ford S-Max. I'm doing a research about it but still a bit confused.
I have few units I'm looking at,
1. Ford specific Joying - JY-FL124N2 ( Android 5.1.1 Lollipop 2GB RAM Intel SoFIA 3GR , 4 Cores )
2. Universal Joying - JY-UL135N2 ( Android 5.1.1 Lollipop 2GB RAM Intel SoFIA 3GR , 4 Cores )
3. Ford specyfic Xtrons - PF75QSFAP-S ( Android 5.1 Lollipop 64 Bit Operating System Quad Core )
4. Ford specyfic Xtrons - PCD76QSFA-S ( Android 6.0 Marshmallow quad core Cortex A7 )
5. Ford specyfic Xtrons - PF70FSFS-S ( 800MHZ Cortex A7 Processor and latest WinCE6.0 )
I'm really into buying ford specific Joying with SoFIA, i was reading about it and plenty of people suggest to buy this one and all seems good but there is one big minus of it, there is no DVD slot (which isn't a problem) the problem is with 2 NOT working buttons 'eject cd' and 'dvd' which is very annoying and taking up the space... I've asked support if there is a chance to reuse (re-programme) those buttons for something else but got no response about that.
Anyway I like the Universal Joying unit the most, one volume knob, few buttons, looks much better then ford specific ones but there is a problem with wiring, its needed to get the harness etc from other source and whats worst connect all that to be working, steering wheels controls are the most stressful for me, and need to get some dash kit for installation. So I will end up with a frame in a frame (unit itself), so it will be very visible that this is a after market unit.
.
If you have any other suggestions please dont hesitate to say.
This will be used mostly for youtube, some movies for my kids, playing music from my phone (Xperia Z3), making calls, using internet from my phone or hotspots, navigation (probably google maps as i like them the most). I also want to get the rear camera with it
Any ideas welccome, thanks!
R
What year is your S-max? For the newer ones (post 2011or so) it's hard to change the OEM unit because the airco controls are integrated.
Johan
Verstuurd vanaf mijn SM-T580 met Tapatalk
JohanEe said:
What year is your S-max? For the newer ones (post 2011or so) it's hard to change the OEM unit because the airco controls are integrated.
Johan
Verstuurd vanaf mijn SM-T580 met Tapatalk
Click to expand...
Click to collapse
Hey Johan, thanks for asking...its 2006 Ford S-Max so its easy enough with those specific ones.
I was thinking about it and decided to use one of the specific ones, less hassle with installation and looks better, less after market. But Im not sure which one to pick, I dont have a big budget for this and would prefer to spend around € 200 on it but i dont want to be disappointed with how the unit works, i need it to work mostly with rear camera, playing music from my phone and simultaneously using navigation or playing videos in the back screens (when i finally buy them, plan for future), making calls, some youtube for kids during the trip...i just have enough of drained batteries in phones by 'wheels on the bus' songs lol
In my opinion, as a general rule you should pick up an unit with 2Gb of Ram and physical buttons.
A quad core is also recommended and to be honest I don't think that you need more then quad. There are some new units with octa but I haven't read more info and don't know if they worth the trouble.
Also I would pick a Ford specific unit because it fits perfectly in the dash compared to a standard 2DIN with various adapters that are not always up to standard most of the time.
Sofia looks like a good option, I am also interested in one... I began to read about it... I need to replace my 2 year old 3066 (KYD) unit.
I am mostly seeking it's instant on feature since I got tired of waiting for 30-40 seconds for my unit to boot each time I start my car.
Also I am not sure that you should opt for a CD unit since most don't use CD's anymore.... but that's up to you.
From my experience these aftermarket silver units are a different shade (brighter) of silver compared to the silver dash Ford elements.
nouserr said:
Hi guys
I'm hoping to get some help from you with deciding head unit for my Ford S-Max. I'm doing a research about it but still a bit confused.
I have few units I'm looking at,
1. Ford specific Joying - JY-FL124N2 ( Android 5.1.1 Lollipop 2GB RAM Intel SoFIA 3GR , 4 Cores )
2. Universal Joying - JY-UL135N2 ( Android 5.1.1 Lollipop 2GB RAM Intel SoFIA 3GR , 4 Cores )
Click to expand...
Click to collapse
edit said:
In my opinion, as a general rule you should pick up an unit with 2Gb of Ram and physical buttons.
A quad core is also recommended and to be honest I don't think that you need more then quad. There are some new units with octa but I haven't read more info and don't know if they worth the trouble.
Also I would pick a Ford specific unit because it fits perfectly in the dash compared to a standard 2DIN with various adapters that are not always up to standard most of the time.
Sofia looks like a good option, I am also interested in one... I began to read about it... I need to replace my 2 year old 3066 (KYD) unit.
I am mostly seeking it's instant on feature since I got tired of waiting for 30-40 seconds for my unit to boot each time I start my car.
Also I am not sure that you should opt for a CD unit since most don't use CD's anymore.... but that's up to you.
From my experience these aftermarket silver units are a different shade (brighter) of silver compared to the silver dash Ford elements.
Click to expand...
Click to collapse
Hey
Thanks for spending time to reply.
Yes i also decided to go with a Ford specific, i know the shade might be different but it will still look better then universal unit with frames...The only thing that is annoying is those 2 not working buttons...
It would be good enough if we can programme them but probably those are just blank covers without a button.
nouserr said:
Hey
Thanks for spending time to reply.
Yes i also decided to go with a Ford specific, i know the shade might be different but it will still look better then universal unit with frames...The only thing that is annoying is those 2 not working buttons...
It would be good enough if we can programme them but probably those are just blank covers without a button.
Click to expand...
Click to collapse
Glad I could help, I have a Mondeo (oval shape headunit unit) myself and exchanged quite a lot of headunits, I had 2 x 2DIN units and 2 x Ford specific ones. With the 2 DIN I had a hard tine finding adapters that fit perfectly but never got one with the right shade of silver or the perfect shape to accommodate the dash and the 2DIN unit... So I gave up on 2DIN units based on the adapters headache and overall look.
I mentioned that thing about the silver shade because you don't have this problem if you buy it black
Some people are bothered if it's not the same shade.
Yes, those 2 dummy buttons annoys me as well but there's nothing we can do... Overall the buttons layout is not for my liking. I would have preferred the standard android buttons on one side (back, home...) and multimedia buttons on the other side (play, stop...). But they tried really hard to cut the costs this time using old parts and completely cutting out the CD/DVD unit. For me the CD/DVD is useless because with all the streaming services I haven't touched an CD in the last 3 years. The DVD player in the car is also useless for me... when I drive I need waze/gmaps/igo/here and PlayerPro/XiiaLive Pro.
The Sofia unit needs a little modding from what I have read... you definitely need to stop the killing app service, install Viper4Android because the 3 band default EQ is really poor in general... and probably many more... still reading on the problems the unit has and the workarounds.
One thing I can say for sure.. if it weren't for the XDA forum and all these great people I would never consider buying an Chinese unit because out of the box it's pretty poor software wise.
nouserr said:
I'm really into buying ford specific Joying with SoFIA, i was reading about it and plenty of people suggest to buy this one and all seems good but there is one big minus of it, there is no DVD slot (which isn't a problem) the problem is with 2 NOT working buttons 'eject cd' and 'dvd' which is very annoying and taking up the space... I've asked support if there is a chance to reuse (re-programme) those buttons for something else but got no response about that.
Click to expand...
Click to collapse
Hi all.
I've recently bought the Joying EU-JY-FL121N2 model, so it fits for a bit newer Modeo/S-max/Focus. In my model there is a dvd slot but it's blanked (not as in the pictures of the hu on the Joying website). The most important thing for you may be the fact that the 'dvd' and 'eject' buttons do work, they just don't do nothing on default. With the
Joying 2GB - Steering wheel key customization - V4 (NO KILL)
mod I am able to use them. I can't be 100% sure that there is the same situation with the other models but I suppose that in fact it is.
[email protected] said:
Hi all.
I've recently bought the Joying EU-JY-FL121N2 model, so it fits for a bit newer Modeo/S-max/Focus. In my model there is a dvd slot but it's blanked (not as in the pictures of the hu on the Joying website). The most important thing for you may be the fact that the 'dvd' and 'eject' buttons do work, they just don't do nothing on default. With the
Joying 2GB - Steering wheel key customization - V4 (NO KILL)
mod I am able to use them. I can't be 100% sure that there is the same situation with the other models but I suppose that in fact it is.
Click to expand...
Click to collapse
Can you please take a picture of your unit and show us how it looks... the pictures from the website are old renderings that had the CD slot removed in Photoshop. I would like to see a real picture if possible.
Let me get straight you managed to remap those buttons to do something else with the help of the mod "Joying 2GB - Steering wheel key customization - V4 (NO KILL)"?
Thank you !
edit said:
Can you please take a picture of your unit and show us how it looks... the pictures from the website are old renderings that had the CD slot removed in Photoshop. I would like to see a real picture if possible.
Click to expand...
Click to collapse
Here you go. The whole unit first:
drive.google.com/open?id=0B7ILN8lhPUkFLWxMcVdyNDZQUGM
And now the picture of the "dvd slot". I shot it with flash so you can see there is no hole:
drive.google.com/open?id=0B7ILN8lhPUkFYXFCNEQxbGZyckk
Let me get straight you managed to remap those buttons to do something else with the help of the mod "Joying 2GB - Steering wheel key customization - V4 (NO KILL)"?
Click to expand...
Click to collapse
That is exactly what I did. In my unit I've got the following codes:
31 - DVD button
32 - EJECT button
33 - MEDIA button
34 - RADIO button
[email protected] said:
Here you go. The whole unit first:
drive.google.com/open?id=0B7ILN8lhPUkFLWxMcVdyNDZQUGM
And now the picture of the "dvd slot". I shot it with flash so you can see there is no hole:
drive.google.com/open?id=0B7ILN8lhPUkFYXFCNEQxbGZyckk
That is exactly what I did. In my unit I've got the following codes:
31 - DVD button
32 - EJECT button
33 - MEDIA button
34 - RADIO button
Click to expand...
Click to collapse
Thank you VERY much for the feedback. The pictures are great. They differ a lot from what they posted ... Surprise! the DVD slot is still there... only that is blocked... hmm.....
I pictured that they at least get rid of the slot and the side lights (that I presume that they still lit the fake cd slot)... kinda sloppy decision.... eh... whatever....
The unit looks good... I am definately getting one.
1. Since I have an Mondeo and I will be getting the exact same unit I gotta ask if everything went fine as for some units there are problems with steering wheel buttons (vol up and down, next, prev) especially the M button in the middle (you can't configure it to do anything)? Do they work ok?
2. Did you encounter problems at start (the unit start command, power on, is sent through CAN and actually interpreted and enable by the chinese CAN decoder) ?
3. Does the instant power on feature works ok?
4. The unit hardware buttons backlight colour match the car dashboard?
5. Is the screen bright enough?
6. At night does it dimm enough or do you need to use some software to dimm it even more? (like I feed the need on my unit, if I turn down the brightness even if it goes prett down I still feel the need to make my screen even darker for those white background apps like Google Play Music)
Thank you !
edit said:
1. Since I have an Mondeo and I will be getting the exact same unit I gotta ask if everything went fine as for some units there are problems with steering wheel buttons (vol up and down, next, prev) especially the M button in the middle (you can't configure it to do anything)? Do they work ok?
Click to expand...
Click to collapse
I was able to get the steering wheel buttons work. I only use those on the left side, but all of them work: vol up/down, next/prev and the 'M' button. In my case the wheel buttons work with connecting 'KEY2' wire - sorry but I don't remember details right know - it is described in the manual from Joying (which is included with the HU). At start after cutting some wire I connected it from the wrong side with the KEY2 one, but then I've noticed a youtube clip
youtube.com/watch?v=QaJqWy9Tk24
and did the same way, but I had to stay with the canbus decoder connected (the only difference from the method shown above).
2. Did you encounter problems at start (the unit start command, power on, is sent through CAN and actually interpreted and enable by the chinese CAN decoder) ?
Click to expand...
Click to collapse
I don't quite understand what you've wrote in brackets - I haven't noticed any weird behaviour with starting the unit.
3. Does the instant power on feature works ok?
Click to expand...
Click to collapse
Yes, it does actually. I don't know much about the battery drain - I've got the unit for a week only. But I've seen somewhere in the forum statistics of the processor activity during the night and it was almost 100% deep sleep so I'm hoping it's ok.
4. The unit hardware buttons backlight colour match the car dashboard?
Click to expand...
Click to collapse
Essentially, yes. In more details: I've set up the red colour (the option of changing colour is visible only with car's lights on - not that much obvious to me) and in the daylight it looks a bit pale - you can see it on the pictures I gave. But when it's dark they look very nice to me - the same or almost the same colour as on the dashboard.
5. Is the screen bright enough?
Click to expand...
Click to collapse
We haven't had many sunny days during the last week, so I may only say - I can see what's on the screen, but I don't think I'm going to use it to watch movies - radio, music, bluetooth, maps - for now it's all I need.
6. At night does it dimm enough or do you need to use some software to dimm it even more? (like I feed the need on my unit, if I turn down the brightness even if it goes prett down I still feel the need to make my screen even darker for those white background apps like Google Play Music)
Click to expand...
Click to collapse
I can't tell anything about that to be honest, this is to check yet. I'm not very sure but I think that the 28 march update brought some more options for backlight of the screen (but it may have been there before also).
I ordered it just now, hope it goes well !
Thank you for all the feedback !
---------- Post added at 12:47 PM ---------- Previous post was at 12:09 PM ----------
[email protected];71748303
Yes said:
Did it start instantly each day or there were days when it booted slowly?
Click to expand...
Click to collapse
edit said:
Did it start instantly each day or there were days when it booted slowly?
Click to expand...
Click to collapse
I didn't notice the last question, so maybe the answer is for other people right now - I haven't got any cold boot yet.
Sent from my D5803 using XDA-Developers Legacy app
[email protected] said:
I didn't notice the last question, so maybe the answer is for other people right now - I haven't got any cold boot yet.
Sent from my D5803 using XDA-Developers Legacy app
Click to expand...
Click to collapse
That is nice to know... I am hoping that my unit will be here in the next 2-3 days... and then it's mod time... lots of work
Have you hard moded yours to add additional cooling to the unit (heatsinks or fans) or did you let it stock? Have you noticed cpu throttling ? Have you checked the CPU temp? (not sure how users checked it out, probably with an app)
Don't know if I will mod my unit, I am not ready to give up the warranty from day 1.
edit said:
Have you hard moded yours to add additional cooling to the unit (heatsinks or fans) or did you let it stock? Have you noticed cpu throttling ?
Click to expand...
Click to collapse
AFAIK people here have got some throttling during cpu stress (some benchmarks I think) - I use the unit for listening to the radio, music, phone calls and navigation, for now at least. I don't think those actions will stress the hu at all or maybe in some small amount - I hope so at least...
Have you checked the CPU temp? (not sure how users checked it out, probably with an app)
Click to expand...
Click to collapse
I haven't done this with the unit, but in my phone I've used cpuz. I think there are plenty of such kind of apps in Play store which even don't need root.
Don't know if I will mod my unit, I am not ready to give up the warranty from day 1.
Click to expand...
Click to collapse
Right now I'm not ready to do any hardware mod and surely I don't feel I need one.
[email protected] said:
AFAIK people here have got some throttling during cpu stress (some benchmarks I think) - I use the unit for listening to the radio, music, phone calls and navigation, for now at least. I don't think those actions will stress the hu at all or maybe in some small amount - I hope so at least...
I haven't done this with the unit, but in my phone I've used cpuz. I think there are plenty of such kind of apps in Play store which even don't need root.
Right now I'm not ready to do any hardware mod and surely I don't feel I need one.
Click to expand...
Click to collapse
What is your CAN bus settings? I am really struggling with my CAN bus. My S-Max headlights are blinking when parked. I would love to know what settings you are using.
Iscariot76 said:
What is your CAN bus settings? I am really struggling with my CAN bus. My S-Max headlights are blinking when parked. I would love to know what settings you are using.
Click to expand...
Click to collapse
What kind of headlights do you have? In my car there are h1/h7 bulbs and I can't see any kind of blinking.
I managed to solve my issue by cutting the wire on the alarm sensor pin in the plug between my car and HU.
Hi everyone,
first of all, my apologizes in advance for duplicating the thread, but I've got the feeling that the original HERE is not in the right place, and therefore I've got 0 comments since open.
Therefore, I transcribe the problem here.
After buying an android head unit for the Fabia mk3 from my wife and testing it at my workshop, I got mad because the front panel buttons were not working. I was almost giving up when I decided to install the radio anyway just to profit from the navigation by forcing us to use it only by the touchscreen, when I found out that the front panel buttons get activated only when the head unit receives the can-bus signals.
However, some days after the installation and the happiness of solving the issue, big surprise when we found the car with the battery dead. o after bringing it back to life, I removed the android radio and checked the current drainage. It was around 300mA for the car switched off. Too much for a car that is parked so long due to the COVID-19 quarantine.
After asking Google, I found out that in the new VAGs, included the Fabia mk3, there is no longer a "switched-off" power cable arriving to the radio. Only an "always-on" one. It seems that the original radio is being switched off by the can-bus signal, bringing the current drainage to a minimum. What is this minimum, I do not know as I haven't measured it.
This doesn't seem to be the case with my android radio which is sucking 300mA when turned off by the can-bus.
So I looked for a "switched-off" signal from the fuse panel and I brought it all the way up to the radio to force the total current shut-off when switching off the car.
Happy with the solution, my wife takes the car again some days after and and told me that the radio was not starting. I went to check it and I found the unit getting blocked at the "android" starting screen.
Sometimes it ends up just blocked there. Sometimes shows an alternating picture between the word "android" and a kind of arrow picture. I share here a couple of screenshots and a small video.
I've tried the reset button, even with the 15 seconds wait, and nothing happens, I get the same blocked starting screen...
Any ideas what can this be? It looks pretty damn bricked to me but I refuse to give up with the radio, it looked very well installed in the car and I was able to "taste" the capabilities right before the battery drainage and it was even sounding better than the ****ty original radio.
Here the head-unit specs:
Android 9.0 System
Capacitive Screen HD 1024*600 1080P HD Video
CPU Rockchip PX3 Cortex A9, 4 core 1.6GHz
2GB DDR3 RAM Memory
16 GB Nand Flash