Related
Ok so here is my problem, I have my HERO running on metropcs, as some of you know, Internet works( Not for me ATM) and no other apps work, so is there any chance of having a proxy running to tell the apps and everything on the phone to run trough wap.metropcs.com port 3128 ?
Thanks
Hi there,
I've just upgraded my HTC Tattoo to the SP-FroYo v2.2.1 AOSP ROM, I had hoped some WiFi problems had been solved. At my work we have a WPA2-PSK encrypted network which also sends out a WPA-PSK encrypted network. Only my HTC Tattoo shows it as a WEP encrypted network, but I can't connect. I use a WPA2-PSK encrypted network at home and it works fine.
Is there a update available to fix some WiFi signals?
Thanks!
Did you had a costum ROM before that one?
Sometimes, if something doesn't work, i allways flash oficial ROM first, then root and finally flash the costum ROM.
Cheers
I had the original ROM before this, and in that ROM it didn't work either!
Have you tried to go to :
Settings > Wireless Controls > Wi-Fi Settings and press the Menu button, select Advance > Regulatory domain
And tell the phone to use (all) 14 channels.
Cheers
It still isn't working, it recognising it but I can't connect
I installed MDJ android froyo build 4.3 and everything was working well.
i had to enter ip address for a certain network at work, everything got messed up, so i removed the ip address enteries i made (use static ip) and still needs ip for connecting, i also checked DLNA auto ip and nothing changed!!
keeps trying to connect (giving me obtaining ip address) and disconnects, doesn't want to connect.
i tried reinstalling android again but keeps giving me this damn problem!!!! i think there r some files not deleted
i tried connecting on WM, i found out that it doesn't connect also
what to do for that ****, really annoyed about that!!
TMOUS HD2 on stock Rom 2.10 and radio 2.08, WM 6.5 and recently installed android MDJ 4.3
Thanks in advance
sevoflurane said:
I installed MDJ android froyo build 4.3 and everything was working well.
i had to enter ip address for a certain network at work, everything got messed up, so i removed the ip address enteries i made (use static ip) and still needs ip for connecting, i also checked DLNA auto ip and nothing changed!!
keeps trying to connect (giving me obtaining ip address) and disconnects, doesn't want to connect.
i tried reinstalling android again but keeps giving me this damn problem!!!! i think there r some files not deleted
i tried connecting on WM, i found out that it doesn't connect also
what to do for that ****, really annoyed about that!!
TMOUS HD2 on stock Rom 2.10 and radio 2.08, WM 6.5 and recently installed android MDJ 4.3
Thanks in advance
Click to expand...
Click to collapse
You may need to enter correct APN settings and or change your DNS settings as well. Check my sig and thumbnail for more help.
I have installed in my HD2 many build but all of this have for me a big problem: all doesn't connect with APN used PAP authentication and user e passswd not null. For my work I must use an "aziendal APN" that must have a PAP authentication. All the build installed failed the connection. I have tested two bulid ANDROID-native ( on a DESIRE phone) and they work very well. What is the problem in HD2 configuration ?
In Windows Mobile mode, if I set a wrong password, the connection failed and I have a message of failure. In Android if I set a wrong password, the connection goes ACTIVE but there aren't byte in reply from the network.
Any idea?
Tanks in advance.
D.
Anyone has this problem? Is there anyone that use an APN with user/pass and PAP auth if this connection work?
D.
dinopall said:
I have installed in my HD2 many build but all of this have for me a big problem: all doesn't connect with APN used PAP authentication and user e passswd not null. For my work I must use an "aziendal APN" that must have a PAP authentication. All the build installed failed the connection. I have tested two bulid ANDROID-native ( on a DESIRE phone) and they work very well. What is the problem in HD2 configuration ?
In Windows Mobile mode, if I set a wrong password, the connection failed and I have a message of failure. In Android if I set a wrong password, the connection goes ACTIVE but there aren't byte in reply from the network.
Any idea?
Tanks in advance.
D.
Click to expand...
Click to collapse
Anyone, anyone that use a PAP auh.with user/passwd not NULL?
you won't find much info about this specific problem, it seems no one is using other APN's other than usual internet APN, I have exactly the same problem with my HD2 running Android, already tried all possible and impossible combination for my work APN, it doesn't help, it connects but it can't authenticate so data doesn't work.
banesi said:
you won't find much info about this specific problem, it seems no one is using other APN's other than usual internet APN, I have exactly the same problem with my HD2 running Android, already tried all possible and impossible combination for my work APN, it doesn't help, it connects but it can't authenticate so data doesn't work.
Click to expand...
Click to collapse
So, we haven't any possibility of solution ...............
D.
But I have found in another forum an input for another base for connection called RMNET. I have tested a bulid ( LEO+FROYO w/sense 1.7) but the process for a new APN goes in crash. Anyone can tell me a build with RMNET and the possibility for declaration new APN for testing my problem?
Many tanks.
I can't remember trying this on rmnet builds, maybe it will work, it seems that when nand versions start to appear we will have rmnet working, we just have to wait a bit more.
There were some rmnet builds around but they are old and you'll miss many good things happened since than.
Sent from HD2, powered by Android.
Yesterday I have tested the build "NexusHD2-FRG83D_V1.8_(Froyo_2.2.1" that have the possibility of switch between PPP e RMNET.
In PPP my connection is up but I see only tx data, non response from the network; in RMNET instead, the connection doesen't go up and the code is "failed autentication of user e/o passwd".
Now I think that the functionality of PAP authentication has many fault in PPP and also in RMNET.....
Problem solved, use one of the NAND roms with rmnet connection. It works for me.
Sent from HD2, powered by Android.
As in beta, you still can't connect to Wi-Fi in official Oxygen OS 10. Network reset did not help
OP 6T has no IP address.
Anyone have any ideas?
..
I had a Bet 10 v.17 phone also had no Wi-Fi connection.
After returning to Android 9, IP appeared again and there were no connection problems.
This is not an issue with Oxygen OS 10. It is a feature of Android 10 called mac randomize. Your mac will be changed randomly when you connect to wifi network. This is for security purpose. If you enabled mac filter in your router then while connecting to your wifi network in your mobile go to advanced options choose Use device mac under the privacy option.
Note: after you upgrade to Android 10 you device mac will be changed. Don't forget to updated your new mac in you router mac filter settings.
Azar_k said:
This is not an issue with Oxygen OS 10. It is a feature of Android 10 called mac randomize. Your mac will be changed randomly when you connect to wifi network. This is for security purpose. If you enabled mac filter in your router then while connecting to your wifi network in your mobile go to advanced options choose Use device mac under the privacy option.
Note: after you upgrade to Android 10 you device mac will be changed. Don't forget to updated your new mac in you router mac filter settings.
Click to expand...
Click to collapse
I have turned off all filters on the router.
I changed to MAC of device, to randomized MAC. Nothing new.
Still can't connect to Wi-Fi.
This is insane! New system and connection problems?
Instead of getting better, it's getting worse.
Bluetooth issues on my phone
I can't even enable wifi connection
Reflash the official update zip....worked for me
I have exactly the same issue.
After upgrading to Oxygen OS 10.0 on my OnePlus 6, connecting to my router with a password became impossible.
The only option is to connect via a guest connection, without a password (hardly a viable option).
All other devices connect properly.
Setting the MAC address to "device MAC" rather than "random MAC" does not solve the problem.
Resetting the phone's wireless settings does not solve the problem.
Factory resetting the smartphone (the only solution suggested by OnePlus support) has not solved the problem.
Resetting the router (Netgear Nighthawk RAX40) has not solved the problem.
SOLUTION !!!
justforkix said:
I have exactly the same issue.
After upgrading to Oxygen OS 10.0 on my OnePlus 6, connecting to my router with a password became impossible.
The only option is to connect via a guest connection, without a password (hardly a viable option).
All other devices connect properly.
Setting the MAC address to "device MAC" rather than "random MAC" does not solve the problem.
Resetting the phone's wireless settings does not solve the problem.
Factory resetting the smartphone (the only solution suggested by OnePlus support) has not solved the problem.
Resetting the router (Netgear Nighthawk RAX40) has not solved the problem.
Click to expand...
Click to collapse
I FOUND A SOLUTION !!!
The router had previous security: WPA2 (very secure).
Android 9 in OP 6T worked with them, but not Android 10.
I have reduced security to: WPA / WPA2 (secure).
Currently, Android 10 connects to a Wi-Fi network without a problem.
You should write the patch in Android 10.
Does this mean that everyone under Oxygen OS 10 should downgrade their Wi-Fi security in order to connect with it?
Is your OnePlus font italic?
Have you used Magisk Canary?
justforkix said:
Does this mean that everyone under Oxygen OS 10 should downgrade their Wi-Fi security in order to connect with it?
Click to expand...
Click to collapse
Haven't yet tried, but it seems to be a solution.. I couldn't understand, WHY it works with all other WiFis and doesn't work with my, but WPA2 looks like answer.
Has somebody reported this bug to OP?
drozel said:
Haven't yet tried, but it seems to be a solution.. I couldn't understand, WHY it works with all other WiFis and doesn't work with my, but WPA2 looks like answer.
Has somebody reported this bug to OP?
Click to expand...
Click to collapse
Until yesterday, were I messed up with root/magisk, everything (including WPA2) was working well for me.
Now I can'T turn on WIFI anymore.
WPA/WPA2 helped for me... OP can't connect to only-WPA2 networks after Android 10 update.
Installed via OxygenUpdater, no root, no unlocked bootloader, full stock
Alex_H_H said:
I FOUND A SOLUTION !!!
The router had previous security: WPA2 (very secure).
Android 9 in OP 6T worked with them, but not Android 10.
I have reduced security to: WPA / WPA2 (secure).
Click to expand...
Click to collapse
many, many thanks!
I can still connect to my existing network, I just had to update my MAC filters.
I really advise against using WPA at all - see if there is firmware update for your router.
Are you using Magisk Canary?
Roll back to Stable and reinstall oos
firegate22 said:
Until yesterday, were I messed up with root/magisk, everything (including WPA2) was working well for me.
Now I can'T turn on WIFI anymore.
Click to expand...
Click to collapse
I had the same issue, flashing a custom kernal (Omega) fixed the problem. Why ? Idk
change private DNS to automatic
changing my DNS from cloudflare to automatic helped me (after also switching to device MAC)
dbarrett480 said:
Reflash the official update zip....worked for me
Click to expand...
Click to collapse
Did you flash the full zip or incremental? From TWRP? Is any wipe necessary after flashing?