Proxy for Android? - Hero CDMA General

Ok so here is my problem, I have my HERO running on metropcs, as some of you know, Internet works( Not for me ATM) and no other apps work, so is there any chance of having a proxy running to tell the apps and everything on the phone to run trough wap.metropcs.com port 3128 ?
Thanks

Related

Android Debug Mode/USB Tethering on XV6800

hey everyone. long time forum lurker, few time poster :/
i have the XV6800 Titan, unlocked and running DCD 4.1.2 currently with Cricket services working in full. From the MicroSD i am running the recent Android release through the Haret.exe software
Cricket WAP requires a proxy server configured for Android to use WAP. i'd like to access the phone from Linux/Windows through telnet or USB in order to configure the sqlite3 proxy and enable WAP on my phone, however the device only charges and does not appear to be mountable or as a serial device in either Gentoo Linux or Windows XP
has anyone had luck with accessing Android from USB? does anyone have a local (from the phone) method of configuring the WAP proxy? perhaps a simple command line option i can run from the phone?
thank you everyone, in advance
FYI the Cricket WAP network i am shooting for is 172.28.178.197 (Portland, OR area) on port 8080 requiring a login ('[email protected]', password 'cricket')
i have tried the this from the terminal (Message key on top left of Titan) only to receive a 'Web page not available' error
Cricket network does receive an IP in Togga, but seems not to hit the proxy
ok, tethering is a no go apparently. that should be fine since there is a Terminal Emulator in Android under Development Tools. i can su to root and run sqlite3 from there without the need to use the Android SDK (adb shell)... or so i believe
i am not trying to configure the Cricket proxy server via sqlite3 as explained here
still no luck so far (i get 'SQL error: not an error' ), but i FEEL like i am getting closer!

[Q] Problem with PAP authentication

I have installed in my HD2 many build but all of this have for me a big problem: all doesn't connect with APN used PAP authentication and user e passswd not null. For my work I must use an "aziendal APN" that must have a PAP authentication. All the build installed failed the connection. I have tested two bulid ANDROID-native ( on a DESIRE phone) and they work very well. What is the problem in HD2 configuration ?
In Windows Mobile mode, if I set a wrong password, the connection failed and I have a message of failure. In Android if I set a wrong password, the connection goes ACTIVE but there aren't byte in reply from the network.
Any idea?
Tanks in advance.
D.
Anyone has this problem? Is there anyone that use an APN with user/pass and PAP auth if this connection work?
D.
dinopall said:
I have installed in my HD2 many build but all of this have for me a big problem: all doesn't connect with APN used PAP authentication and user e passswd not null. For my work I must use an "aziendal APN" that must have a PAP authentication. All the build installed failed the connection. I have tested two bulid ANDROID-native ( on a DESIRE phone) and they work very well. What is the problem in HD2 configuration ?
In Windows Mobile mode, if I set a wrong password, the connection failed and I have a message of failure. In Android if I set a wrong password, the connection goes ACTIVE but there aren't byte in reply from the network.
Any idea?
Tanks in advance.
D.
Click to expand...
Click to collapse
Anyone, anyone that use a PAP auh.with user/passwd not NULL?
you won't find much info about this specific problem, it seems no one is using other APN's other than usual internet APN, I have exactly the same problem with my HD2 running Android, already tried all possible and impossible combination for my work APN, it doesn't help, it connects but it can't authenticate so data doesn't work.
banesi said:
you won't find much info about this specific problem, it seems no one is using other APN's other than usual internet APN, I have exactly the same problem with my HD2 running Android, already tried all possible and impossible combination for my work APN, it doesn't help, it connects but it can't authenticate so data doesn't work.
Click to expand...
Click to collapse
So, we haven't any possibility of solution ...............
D.
But I have found in another forum an input for another base for connection called RMNET. I have tested a bulid ( LEO+FROYO w/sense 1.7) but the process for a new APN goes in crash. Anyone can tell me a build with RMNET and the possibility for declaration new APN for testing my problem?
Many tanks.
I can't remember trying this on rmnet builds, maybe it will work, it seems that when nand versions start to appear we will have rmnet working, we just have to wait a bit more.
There were some rmnet builds around but they are old and you'll miss many good things happened since than.
Sent from HD2, powered by Android.
Yesterday I have tested the build "NexusHD2-FRG83D_V1.8_(Froyo_2.2.1" that have the possibility of switch between PPP e RMNET.
In PPP my connection is up but I see only tx data, non response from the network; in RMNET instead, the connection doesen't go up and the code is "failed autentication of user e/o passwd".
Now I think that the functionality of PAP authentication has many fault in PPP and also in RMNET.....
Problem solved, use one of the NAND roms with rmnet connection. It works for me.
Sent from HD2, powered by Android.

[Q] SDK debugging through charles proxy

Okay, I'm running an android 1.5 emulator and I'm trying to debug an app using charles proxy.
emulator -http-proxy 127.0.0.1:8888 (a)andemu
Well, everything works (browser and all) BUT nothing shows up in my charles proxy.
I'm in the process of trying fiddler2 to do this using the same ip and port.
I'm also quite new at this and I hope someone can tell me how stupid I am for trying this and failing completely... and then tell me how to do it right. I'm sure I'll get plenty of the former, hopefully some of the latter too
Thank you in advance for your help,
Tek.
Edit: Fiddler2 didn't work either. I've been reading up on it and I'm going to try to create a new APN using the actual emulator and set the APN as my 127.0.0.1:8888 and hope that works. I don't know what to put in instead of that so I can set that as my proxy and use an APN... Not even sure what that is actually...
Edit2: And no. Of course not. Seems nothing I try works. Am I using the wrong emulator? I just need something that I can debug via proxy. I can't even get it to run through my proxy so how will I know what's working and what's not?

hd revolution 6.1.4 & vpn

hi
vpn can be connected in revolution 6.1.4 but i can not get into any site....
what's the problem????
It could be a dns related problem, as a start try to connect remote site using ip address. Btw. are you using your phone's vpn client or something else?
jms-xda said:
It could be a dns related problem, as a start try to connect remote site using ip address. Btw. are you using your phone's vpn client or something else?
Click to expand...
Click to collapse
I made a L2TP Connection which i use for my pc without any problem....
hello
I havent received any answer yet.....
VPN on Android 2.3.5 ARDH 6.1.5
I managed to get PPTP working on my android phone running 2.2
I used the stock VPN settings screen to do this.
1. Settings->Wireless and Network-> VPN Settings.
2. Add VPN
3. Add PPTP VPN
4. VPN Name - whatever
5. Set VPN server: (or whichever server you want to use)
6. Enable Encryption: UnCheck
Then save and you'll be brought back to the VPN settings screen. Select the newly created VPN entry, and you'll be prompted for your username and password. Be careful about typing your password in, its difficult with the onscreen keyboard.
Mine connects after that.
L2TP doesn't work for me though.
K73
ARHD 6.1.5
bmojtaba said:
hi
vpn can be connected in revolution 6.1.4 but i can not get into any site....
what's the problem????
Click to expand...
Click to collapse
Try ARHD 6.1.5 , maybe more luck...
http://forum.xda-developers.com/showthread.php?t=840040

[Q] No service in all WP7 roms

Hi!
I have problem with cellular connection.
I've tried few roms:
http://forum.xda-developers.com/showthread.php?t=1356833
http://forum.xda-developers.com/showthread.php?t=953078
I can't connect to gsm network.
Connection Setup says that my carrier doesn't exist in database (Play, Poland).
I did input my apn settings manually, but it didn't work eather.
On Android and WM6.5 everything is working fine. Few months ago I've had BackToTheFuture 7720 rom - without problems as well.
I'm running out of options...
Check if there is an update to Connection Setup, otherwise you could try flashing an original WM 6.5 Rom and see if the problem persists.
I've installed WM6.5 - everything is working fine.
Connection Setup from marketplace - same story as before.
Any ideas?
gregory90 said:
I've installed WM6.5 - everything is working fine.
Connection Setup from marketplace - same story as before.
Any ideas?
Click to expand...
Click to collapse
There is a new connections database cab for connection setup at yuki/xbmod tweaks thread, but Play is not in the database. Must be a niche carrier. Find out if Play is a reseller of a larger carrier.
Actually there is Play in that database. It seems like Connection Setup can't detect proper network (I'm using Turbosim to remove simlock - could this be causing problem?).
Is there a way to tell Connection Setup what settings should it use? Or set this manually?

Categories

Resources