I have installed in my HD2 many build but all of this have for me a big problem: all doesn't connect with APN used PAP authentication and user e passswd not null. For my work I must use an "aziendal APN" that must have a PAP authentication. All the build installed failed the connection. I have tested two bulid ANDROID-native ( on a DESIRE phone) and they work very well. What is the problem in HD2 configuration ?
In Windows Mobile mode, if I set a wrong password, the connection failed and I have a message of failure. In Android if I set a wrong password, the connection goes ACTIVE but there aren't byte in reply from the network.
Any idea?
Tanks in advance.
D.
Anyone has this problem? Is there anyone that use an APN with user/pass and PAP auth if this connection work?
D.
dinopall said:
I have installed in my HD2 many build but all of this have for me a big problem: all doesn't connect with APN used PAP authentication and user e passswd not null. For my work I must use an "aziendal APN" that must have a PAP authentication. All the build installed failed the connection. I have tested two bulid ANDROID-native ( on a DESIRE phone) and they work very well. What is the problem in HD2 configuration ?
In Windows Mobile mode, if I set a wrong password, the connection failed and I have a message of failure. In Android if I set a wrong password, the connection goes ACTIVE but there aren't byte in reply from the network.
Any idea?
Tanks in advance.
D.
Click to expand...
Click to collapse
Anyone, anyone that use a PAP auh.with user/passwd not NULL?
you won't find much info about this specific problem, it seems no one is using other APN's other than usual internet APN, I have exactly the same problem with my HD2 running Android, already tried all possible and impossible combination for my work APN, it doesn't help, it connects but it can't authenticate so data doesn't work.
banesi said:
you won't find much info about this specific problem, it seems no one is using other APN's other than usual internet APN, I have exactly the same problem with my HD2 running Android, already tried all possible and impossible combination for my work APN, it doesn't help, it connects but it can't authenticate so data doesn't work.
Click to expand...
Click to collapse
So, we haven't any possibility of solution ...............
D.
But I have found in another forum an input for another base for connection called RMNET. I have tested a bulid ( LEO+FROYO w/sense 1.7) but the process for a new APN goes in crash. Anyone can tell me a build with RMNET and the possibility for declaration new APN for testing my problem?
Many tanks.
I can't remember trying this on rmnet builds, maybe it will work, it seems that when nand versions start to appear we will have rmnet working, we just have to wait a bit more.
There were some rmnet builds around but they are old and you'll miss many good things happened since than.
Sent from HD2, powered by Android.
Yesterday I have tested the build "NexusHD2-FRG83D_V1.8_(Froyo_2.2.1" that have the possibility of switch between PPP e RMNET.
In PPP my connection is up but I see only tx data, non response from the network; in RMNET instead, the connection doesen't go up and the code is "failed autentication of user e/o passwd".
Now I think that the functionality of PAP authentication has many fault in PPP and also in RMNET.....
Problem solved, use one of the NAND roms with rmnet connection. It works for me.
Sent from HD2, powered by Android.
Related
I have jasjar with latest rom from imate.
I have two major problem with my operator: TIM
1. follwing all the instructions about MMS on the TIM website I still get an error, receiving and sending MMS
2. changing the pin, I get "unknown sim error". I tried with two different sim, an old 32kB and a new one 128kB.
Any other italian reader with kaskar and TIM?
thanks
Rosario
Hi, I'm Italian and I get it working.
You need to:
1) set a new connection (I put it in My Work Connection): name timMMS,select a modem:Cellular Line (GPRS,3G),Access Point name: mms.tim.it
2) go to mms configuration (it's in the menu in the messaging centre), and you put the data you can find here: www.i.tim.it/file/0,,774,00.pdf
So server name TIM_mms (or whatsoever), gateway 213.230.130.89, port number 9201, server address http://mms.tim.it/servlets/mms
connect via Work, and IMPORTANT: choose Wap version WAP 1.2, not 2.0 or it doesn't work
Ciao
I configured it in this way too. But no luck, I still get an error after 30 secs sending messages, or retriving it.
Very strange, same sim, same parameters but different phone and everything works great.
I don't understand why in some jasjar they work and in others they don't.
Do you get an error when you try to change the pin code to you sim?
thanks
ciao
anyone of you got the MobileTV working ... which are the RTSP addresses ?
rpingar, I disabled the pin code.
Maybe you should try this (I haven't a clue, but...)
Please pay attention to put it in WAP mode 1.2
I am trying to connect to my university's wireless.
We have two different wireless ssid's that i can connect to with my laptop.
The first, called UBC is unsecured, but when you connect, it takes you to a web page where you enter your username/password.
The second, called ubcsecure, can authenticate with either WPA2 or WPA ( it shows up as WPA2-Enterprise).
The encryption method is AES for WPA2, and TKIP for WPA.
EAP type: PEAP v0 , Authentication protocol is MS-CHAP-V2
there is an option for mutual authentication using a certification server:
secure.wireless.ubc.ca
I am unable to connect to either using the stock HTC magic ROM, the HoFo community rom, and most recently, myHero 1.0.1
I have tried editing /system/etc/wifi/wpa_supplicant.conf to include
network={
ssid="ubcsecure"
proto=WPA
key_mgmt=WPA-EAP
pairwise=TKIP
group=TKIP
eap=PEAP
identity="[email protected]"
password="password"
phase1="peaplabel=0"
phase2="auth=MSCHAPV2"
}
Any ideas as to how to connect?
Data wipe.
Try to reset your phone's basic settings.
It could rebuild the information necessary to acquire the specific IP from their connection.
Manually entering the data couldn't hurt either. This is something that usually I would consider consulting the school about. Privatized internet connections could cause a number of issues for those seeking to utilize Wi-Fi.
The NAT settings might be too strict to support a handheld device.
Me too!
have you found any other solution??
i m here in ubc as well with my htc magic 1.5
when i'm trying to connect to ubc,, it keeps requiring the ip but doesnt connet
and ubcsecure doesnt even show up!
is really frustrating not being able to use internet in universityyy..
i thought by activating the wpa enterprise will work for the ubcsercure, i guess not??
will any of the heros rom work??
Im having this problem too.. anyone find a fix?
I have no idea why but ubcsecure seems to be working using JesterBlur ROM. http://forum.xda-developers.com/showthread.php?t=567122
it works on the Dream? or sapphire? I don't think it matters but... be interesting to know
Dream. Theres a version for the Sapphire. Maybe give it a shot? ubcsecure still working here.
Ask for working setting
absolutcamper said:
Dream. Theres a version for the Sapphire. Maybe give it a shot? ubcsecure still working here.
Click to expand...
Click to collapse
Did you use the UI setting or you edit the "wpa_supplicant.conf" file manually?
would you please send us your "wpa_supplicant.conf" file or its ubcsecure part? it would be the great help to have a working setting.
Cheers,
Ali
I used the UI that came up during first boot. How can I get to that file?
the wpa_supplicant is in /data/misc/wifi. But considering how it works using the ui settings, i dont think changing the config file will work...but please still post it.
I also tried replacing the wlan.ko from the jesterblur rom... and doesnt seem to be compatible with magic which is apparently normal because there is a patch for magic users that fixes wifi apparently. I will try the wlan.ko from the fix soon probably to see if it works.
Hi guys,
I'm at UBC with the same problem (I can't even connect to the regular UBC network). I went to the UBC help desk and they basically told me that they don't support android at all. The funny thing is I can connect to the fatport network with no problems but cannot connect to ubc, ubcsecure or eduroam networks on campus. I'm currently runnning on Cyanongen 4.2.4 (waiting for 32a kernel to upgrade to 4.2.5) on a rogers htc magic.
Anyway, the point of this post. If anyones interested in meeting up at UBC to find a solution to this problem it'd be great. I'm hoping we can eventually create a package of some sort that'll fix any android phone but lets focus on fixing the current prob first.
Also @fnkaze - aren't the dream and sapphire the same thing?
Er, i think the dream is the G1 and the sapphire is the G2 aka the rogers magic... well i think the dream has a differnt wifi driver? maybe.. thats the problem
I think the reason why they dont support android is because the stock rogers rom doesnt have native wpa2 support i think.... but the custom roms should have it.. the hero rom does have it... at home my wpa2 wifi works fine
I can also connect to fatport, i think the eduroam is also using the same thing...tho ive heard eduroam seems to work on the rogers rom at different univeristies..
I still have yet to try the jester rom wifi driver tho, ill try it soon...
Thanks for the clarification. And the reason eduroam works at other universities is because the WPA encryption settings are based on the uni's actual/main wireless network. So at different universites the authentication protocols might be a bit different.
What phone do you have? The dream or the magic? The jester rom doesn't work on my magic.
i have the magic, but i think it should work on the magic, they also have a seperate patch to get Wifi working for the it.. so im assuming its possible..
So yeah, Concordia University in Montreal has the same WPA2-Enterprise and this is how I got WIFI to work on my Magic (with HoFo's Sense UI ROM, would still probably work with a rooted 1.5/1.6 ROM)
In fact it will probably work with any rooted Dream or Magic
Remember you need your phone to be rooted for this to work, you will also need to have the drivers installed for your phone from the Android SDK.
- Go into recovery mode
- mount the /data/ folder
Code:
adb shell mount /data
- With ADB Pull the /data/misc/wifi/wpa_supplicant.conf file to your computer (in this example it will go to the tools folder where you have your androidsdk)
Code:
adb pull /data/misc/wifi/wpa_supplicant.conf .
- Make a backup of your conf file in case you mess something up
- Edit it and add in the configuration settings given by your University for Linux wpa_supplicant.conf files, so in your case
Code:
network={
ssid="ubcsecure"
proto=WPA
key_mgmt=WPA-EAP
pairwise=TKIP
group=TKIP
eap=PEAP
identity="[email protected]"
password="password"
phase1="peaplabel=0"
phase2="auth=MSCHAPV2"
}
- With ADB Push the wpa_supplicant.conf from your computer to the /data/misc/wifi/ folder
Code:
adb push wpa_supplicant.conf /data/misc/wifi/
mydewji13 said:
UBC help desk and they basically told me that they don't support android at all.
Also @fnkaze - aren't the dream and sapphire the same thing?
Click to expand...
Click to collapse
Honestly that person at the helpdesk probably doesn't even know what Android is. If they says they don't support Android at all, well using their logic any Linux distro using wpa_supplicant.conf isn't supported which OBVIOUSLY isn't the case.
And no the Dream and Magic are far from being the same device.
Thanks!
I'll try this solution and see if it works. Will post back to let you know how it goes.
Hi,
Ok, I just finished installing the sdk, fixing udev to recognize my phone etc...
The problem I'm having is that everytime I run:
Code:
adb shell mount /data
I get the following error:
Code:
mount: cannot read /etc/fstab: No such file or directory
Help?!?!
NVM after reading the adb -help i tried this:
Code:
adb pull /data/misc/wifi/wpa_supplicant.conf /home/myuser
Ok something really wierd happened...I pushed a new wpa supplicant file and the rebooted the phone and it stopped seeing wireless networks! But ubcsecure showed up as a known network. If I long press it an 'forget it' I can see networks again, but still cant connect to any ubc network?
WTF>?
Is there anyway I could use by ubuntu wpa_supplicant settings? Anyone know where the file is on Karmic? b/c I cant find it at all
I installed MDJ android froyo build 4.3 and everything was working well.
i had to enter ip address for a certain network at work, everything got messed up, so i removed the ip address enteries i made (use static ip) and still needs ip for connecting, i also checked DLNA auto ip and nothing changed!!
keeps trying to connect (giving me obtaining ip address) and disconnects, doesn't want to connect.
i tried reinstalling android again but keeps giving me this damn problem!!!! i think there r some files not deleted
i tried connecting on WM, i found out that it doesn't connect also
what to do for that ****, really annoyed about that!!
TMOUS HD2 on stock Rom 2.10 and radio 2.08, WM 6.5 and recently installed android MDJ 4.3
Thanks in advance
sevoflurane said:
I installed MDJ android froyo build 4.3 and everything was working well.
i had to enter ip address for a certain network at work, everything got messed up, so i removed the ip address enteries i made (use static ip) and still needs ip for connecting, i also checked DLNA auto ip and nothing changed!!
keeps trying to connect (giving me obtaining ip address) and disconnects, doesn't want to connect.
i tried reinstalling android again but keeps giving me this damn problem!!!! i think there r some files not deleted
i tried connecting on WM, i found out that it doesn't connect also
what to do for that ****, really annoyed about that!!
TMOUS HD2 on stock Rom 2.10 and radio 2.08, WM 6.5 and recently installed android MDJ 4.3
Thanks in advance
Click to expand...
Click to collapse
You may need to enter correct APN settings and or change your DNS settings as well. Check my sig and thumbnail for more help.
Hi all,
i've a big problem here, i can't connect to my home router.
router got wep encryption 64 bit, hd2 with stock rom wm 6.5 ( 5.2.21869 ), rom versio 1.66.408.1 ( 76641 ) ITA, radio version 2.15.50.14, protocol version 15.42.50.11u, hspl 2.08.
i think is an os or radio or hspl error, because when i boot into android i can connect to the router, but not in wm 6.5.
can someone help me resolving this problem?
thx in advance at all who would help me.
Alessio
Hi
Do you use MAC address filter in your router?
Probably the WiMo 6.5 and the ANDROID Wifi MAC-Addresses are different and only the ANDROID MAC-address is entered to the router's MAC filter and is allowed to get internet access by the MAC-Filter.
br
Rainer
No man, i don't use any mac filter.
i think that was something inerent to android, cause this problem come showing when i had installed it. before i had no problem.
UP. none got any idea?
Well, good news.... now my 3g connection aren't working on android...
( wm6.5 wifi ko 3g ok --- android wifi ok 3g ko ) none could help me?
Did you put in the right APN settings in android?
And are you sure your the setting on your wifi channel is right. Meaning is it on the right channel? E.g. 8, 20, 11
If you're not sure, factory resetting the router might restore it to the compatible channel.
the apn is right... is the same as wm 6.5 ( i get it from my provider assistence ).
the router is on channel 6. i think that couldn't be an error in router configuration and also an apn error cause wifi in android works and 3g in wm 6.5 also.
wm 6.5 cna't connect to any router ( i've tried in 8 different router) maybe an hspl error?
UP. none could help me?
im having this same problem
Mmm, you can try reinstalling the radio. Might fix wifi. If that doesn't work, I still recommend hard resetting the router.
But are you sure your apn settings are right? If it works in winmo, then more than likely it's the apn settings in android that is wrong. But I'm not sure. You can try search up your carrier's apn settings, and try those.
hi,
so i was wondering do you need hslp (not spl) to run wifi on ics (sd version not nand) because i dont have hspl and wifi works for my gingerbread currently but if i want to change to different sd roms wifi never works
Plz Help!!!
HSPL has nothing to do with SD builds.
It doesn't affect the way your ROM behaves and you don't need it whatsoever. [As long as you're not using NAND]
so do you have any idea why my wifi doesnt work ??
It is probably kernel related, have you (tried to) change it recently?
do you mean acutal roms, them yes i have tried about 5 and non of them work ( i mean wifi )
it would help massively if you explained in what way your wifi doesnt work. i.e does it turn on but not connect? does it appear to connect but no network? It would also help if you described your network a little, i.e wep? wpa? mac filtered? home router? works router? You've confirmed it works under other android sd roms, right? just ICS?
Just saying 'it doesnt work', is like phoning a mechanic and saying 'my car doesn't work, , tell me what's wrong''.
hi,
my wifi network shows up on the wifi settings and if I enter my password it just says = secure with with WPA/WPA2 PSK but it dows not connect. I have wpa2psk network at my rom is MDJ_GingerBread_HD2_v.1.0_RC5_RAM_STOCK( which wifi works). I want to set up IceCreamTostidroid v11.0 normal. Is it the roms fault or mine???
thx for the help
Flashpoint382 said:
hi,
my wifi network shows up on the wifi settings and if I enter my password it just says = secure with with WPA/WPA2 PSK but it dows not connect. I have wpa2psk network at my rom is MDJ_GingerBread_HD2_v.1.0_RC5_RAM_STOCK( which wifi works). I want to set up IceCreamTostidroid v11.0 normal. Is it the roms fault or mine???
thx for the help
Click to expand...
Click to collapse
If you are booting through haret try this,in wm6.5 turn on airplane mode,now boot back to android,try wifi now
Sent from my HD2 using xda premium