Database Users

Honor 7 Premium Stock images. (PLK-L01) / Stock ROM.

Need those for flashing from Fastboot.
All of them system,boot,recovery and others.
My situation in shortly:
*I unlock my Bootloader and installed "Chinese TWRP" on it.
*After that my device rebooted normally once, after second reboot that start reboot only to the fastboot or the TWRP.
*Then i reformat whole device and tried to install Modaco customROM at first try, that bring me "Bootloop" and i was on that situation like 2days almost.
Then things starts resolve and with speed, heres the steps how i unbick my device and got flashed latest firmware inside of it and i finally update to the B330 and then moved to the YodaROM v8.
1. I talked with multiple users on this forum and on others boards, and then i got great advices from user: inside!out.
2. He told me right region code for my phone and package where i should to start look and unbrick my device, also i used hes "Honor 7 MultiTool" for unbrick my device.
-First i resolve what is my device region code (My was: C432) and then i look B180 FULL update package with my region code.
-Then i install HuaweiExtractor like the MultiTool says on the instructions, and after that is installed my PC i take out .img files from that "Update.app" file to separately.
-After that is done i move those to the "Unbrick" folder on MultiTool, and i unbrick my device with those B180 files, and also placed that B180 "Update.app" file to my device's SDCard under /dload folder.
-When unbricking was done my device rebooted normally with 5.0.2 version of android and with 3.1 version of EMUI.
Part of updating:
-Downloaded B330 files what match to with my region code and location.
-Then i move that B330 "Update.app" file to my SDCard under /dload folder, and then i reboot my phone with (3-Button) method and i start recovery.
(with USB-Cable plugged i reach 95% and without cable i reach 19% always).
-Tested that multiple times and always same thing, not sure was the problem on my SDCard or what, but i change it to another. And now i flash B180 files over again.
-Again i moved B330 "update.app" to the SDCard on /dload folder, and started recovery with (3-button) method. Suddenly now that update reach 95% and then got FAIL.
-Rebooted my device normally and WTF? there was B330 inside with 6.0 android even that recovery FAILS at 95%.
-After that i flash TWRP again and Downloaded YodaROM v8 what i push to my SDCard and installed that trought TWRP with instructions.
-Same thing with Xploited app, you can find instructions for it from YodaROM thread.
Files what i used on whole operation:
Honor MultiTool.
TWRP 3.0.2-0.
Honor 7 C432B180 and C432B330 packages.
HuaweiUpdateExtractor.
YodaROM v8.
Xposed Framework for arm64 sdk23.

kenkae said:
Need those for flashing from Fastboot.
All of them system,boot,recovery and others.
Click to expand...
Click to collapse
The same of Honor 7
Отправлено с моего PLK-L01 через Tapatalk

inside!out said:
The same of Honor 7
Отправлено с моего PLK-L01 через Tapatalk
Click to expand...
Click to collapse
Tried to install differend ROMs what i have found for it, still that stands on loading screen "Honor powered by Android"
Also tried to flash couple differend image sets but with no results. Just looking something what works and i can get my phone to use again. :laugh:

kenkae said:
Tried to install differend ROMs what i have found for it, still that stands on loading screen "Honor powered by Android"
Also tried to flash couple differend image sets but with no results. Just looking something what works and i can get my phone to use again. :laugh:
Click to expand...
Click to collapse
Your firmware build? Full symbols
Отправлено с моего PLK-L01 через Tapatalk

inside!out said:
Your firmware build? Full symbols
Отправлено с моего PLK-L01 через Tapatalk
Click to expand...
Click to collapse
Where i can check that, cant boot to the system with my phone. And also i can use custom recovery what i can flash there TWRP and Fastboot when im Bootloader.
On package i can see mark: 51710NEL-D and that PLK-L01 - ROM: 32GB

Hi. I have an Honor 7 premium also. I think the right designation is "enhanced edition" its 32 GB ROM and it came with version PLK-L01 C900B188 so I guess you should have the same version. I tried to update to B330 but it fails at 2% and reboot.
Enviado do meu EVA-L09 através de Tapatalk

Ups, you have c900 custom version. Honor 7 standard has c432
Отправлено с моего PLK-L01 через Tapatalk

Yes. I asked honor what version should I update and they told me to use honor.UK for download. I've downloaded C432B180 and C432B330b but neither one install correctly.
Enviado do meu EVA-L09 através de Tapatalk

HmMarques said:
Yes. I asked honor what version should I update and they told me to use honor.UK for download. I've downloaded C432B180 and C432B330b but neither one install correctly.
Enviado do meu EVA-L09 através de Tapatalk
Click to expand...
Click to collapse
C432 is West Europe. C10 is Russia.
C900 I don't know. Seeking for C900 firmware.
Отправлено с моего PLK-L01 через Tapatalk

Thank you, I've been searching for some time, but no luck.. They keep saying to use Honor.UK for firmware download.
Enviado do meu EVA-L09 através de Tapatalk

Ask honor.UK for vendor_update.app for change to c432.
My honor was c10, but Russian firmware still b140. I update to c432 with vendor_update.app that honor EU provide to me. And I had b330 now. It's for locked BL, I haven't root.
Отправлено с моего PLK-L01 через Tapatalk

Still got the problem, yes this is that Honor 7 Premium 32GB the "new model"
Still facing that boot problem with some of files boot starts automaticly restarting after 5 seconds and with other files that just stand on that "Honor" loading screen at the beginning
And if that helps anything i live in Finland..

kenkae said:
Still got the problem, yes this is that Honor 7 Premium 32GB the "new model"
Still facing that boot problem with some of files boot starts automaticly restarting after 5 seconds and with other files that just stand on that "Honor" loading screen at the beginning
And if that helps anything i live in Finland..
Click to expand...
Click to collapse
Try to unbrick from same firmware files with my multi-tool
Отправлено с моего PLK-L01 через Tapatalk

inside!out said:
Try to unbrick from same firmware files with my multi-tool
Отправлено с моего PLK-L01 через Tapatalk
Click to expand...
Click to collapse
What you mean with same files?
Dont got any working backups from my stock files from the phone, thats why i need to know what is firmware where im going to flash correct files/ROM for it. Every tip/hint are welcome!
EDIT: And if i forgot to tell my phone is atm totally empty there is nothing anymore inside, and now started flashing unbricking with your Multitool from: PLK-L01C432B100
And im thinking to try unbrick with every package, let see what that gives to me. Lets hope we can resolve this soon! -,-
Packages from: http://forum.xda-developers.com/honor-7/general/plk-l01-firmwares-updates-official-beta-t3272205
That helps lots of if someone got ORIGINAL ROM taked instantly before doing any modifications, dont know why my backup file was corrupted and wasnt work so im now in bad situation.
What happens:
*Downloaded (Honor 7_Firmware_PLK-L01_Andriod 6.0_EMUI4.0_C432B330b_France_Germany_Spain_Holland_Italy.zip)
*Flashed .img's with Honor Tool with Unbrick option -> moved update.app file to SD card under the folder /dload.
*Boot stands still with "Honor" logo but when i do "3 button reboot" and start updating that will happen with USB cable insted of WIFI but that got stucked at 5%.
(Earlier that update tried to go trought WIFI and always got failed instantly)
**Installed B180 Boot and Recovery.img and now i have access login to my WIFI, still after i login there and started download recovery package trought WIFI that got FAILED almost instantly.
More coming when i got something new what is good to inform...

I promise 50$ reward with Bitcoins/Skrill/PayPall or Finland Bank Transfer to person who help me out of this grave.

kenkae said:
I promise 50$ reward with Bitcoins/Skrill/PayPall or Finland Bank Transfer to person who help me out of this grave.
Click to expand...
Click to collapse
Answer step by step, what you had and what you did.
Отправлено с моего PLK-L01 через Tapatalk

inside!out said:
Answer step by step, what you had and what you did.
Отправлено с моего PLK-L01 через Tapatalk
Click to expand...
Click to collapse
Phone= Huawei Honor 7 PREMIUM ROM: 32GB | PLK-L01 ??????? | Country: Finland | Bootloader UNLOCKED
Link to the device what i have on my hands atm: https://kauppa.saunalahti.fi/?&_ga=1.32807035.453105054.1462124093#!/puhelimet/Honor-7-Premium
*: Opened my device from box -> tested it couple hours.
**: Then i unlock bootloader with instuctions with received OEM UNLOCK code from huawei
***: Installed Chinese lang TWRP with instuctions that can be found on this forum:
***: I Boot my phone normally to the System and that works normally, after i reboot again my phone only reboot to the Chinese TWRP.
**** Tried factory reset and all but not works, still i got always booted to the Chinese TWRP.
*****: Flashed custom ROM if i remember right that was http://forum.xda-developers.com/honor-7/development/rom-r1-modaco-custom-rom-t3339554
*****: Faced same problem, then ERASE every section totally from the phone and tried again.
******: Now i have flashed uncountable amount of differend boot and recovery images without any results. Phone just reboot after reboot or stands on "Honor" loading screen at the start.
*******: Where im now, i have erased again total phone and sdcard, then i created /dload folder to the sdcard and i move B180 update.app to the SDCARD. Then i flash that Boot and Recovery image from B180 and i start (3-Button restart) what is called "Erecovery" and that started download/install that recovery trought USB now and got stucked in 90%.
I know there is a solution to get this back to work, and that solution is correct files what match with my device. Dont have got any devices to this situation before. Bad thing is the i dont remember unlock code for relock it again and i have unlocked bootloader so that can be effect to my warranty.

kenkae said:
Phone= Huawei Honor 7 PREMIUM ROM: 32GB | PLK-L01 ??????? | Country: Finland | Bootloader UNLOCKED
Link to the device what i have on my hands atm: https://kauppa.saunalahti.fi/?&_ga=1.32807035.453105054.1462124093#!/puhelimet/Honor-7-Premium
*: Opened my device from box -> tested it couple hours.
**: Then i unlock bootloader with instuctions with received OEM UNLOCK code from huawei
***: Installed Chinese lang TWRP with instuctions that can be found on this forum:
***: I Boot my phone normally to the System and that works normally, after i reboot again my phone only reboot to the Chinese TWRP.
**** Tried factory reset and all but not works, still i got always booted to the Chinese TWRP.
*****: Flashed custom ROM if i remember right that was http://forum.xda-developers.com/honor-7/development/rom-r1-modaco-custom-rom-t3339554
*****: Faced same problem, then ERASE every section totally from the phone and tried again.
******: Now i have flashed uncountable amount of differend boot and recovery images without any results. Phone just reboot after reboot or stands on "Honor" loading screen at the start.
*******: Where im now, i have erased again total phone and sdcard, then i created /dload folder to the sdcard and i move B180 update.app to the SDCARD. Then i flash that Boot and Recovery image from B180 and i start (3-Button restart) what is called "Erecovery" and that started download/install that recovery trought USB now and got stucked in 90%.
I know there is a solution to get this back to work, and that solution is correct files what match with my device. Dont have got any devices to this situation before. Bad thing is the i dont remember unlock code for relock it again and i have unlocked bootloader so that can be effect to my warranty.
Click to expand...
Click to collapse
Ok. Thanks for details. What firmware you had from box before these actions?

inside!out said:
Ok. Thanks for details. What firmware you had from box before these actions?
Click to expand...
Click to collapse
I thank the person who knows that, dont runned bigger updates or nothing before i take my own actions. Clearly dont know my firmware when i do those actions.
Thats helps alot if i can resolve that somehow,

kenkae said:
I thank the person who knows that, dont runned bigger updates or nothing before i take my own actions. Clearly dont know my firmware when i do those actions.
Thats helps alot if i can resolve that somehow,
Click to expand...
Click to collapse
I try to help you. Modaco's ROM based on 330?
Отправлено с моего PLK-L01 через Tapatalk

[GUIDE] Use different region firmware without rebranding

Things Needed:
Unlocked Honor 7x : Go here
A PC
WinRAR
Firmware Finder
HuaweiUpdateExtractor_0.9.9.5
Note: I suggest you to read from here and see all guides from here to backup your phone completely before doing this
Downloads:
1. Firmware Finder : Website
2. HuaweiUpdateExtractor_0.9.9.5 : OP
Instruction:
1. Run Firmware finder and go to Common Base tab, enter bnd in Model for find and click Find
2. Click the link under Filelist of the latest FullOTA package (I used BND-AL10C00B182)
3. Download the first link (update.zip) and third link (update_full_BND-AL10_all_cn.zip) from the pop up and extract UPDATE.APP from them to different locations, using winrar. Now you have 2 UPDATE.APP files at different locations.
Again, Download the last link of latest OTA Package of your variant (update_BND-L22_hw_in.zip for india) (optional) (i used BND-AL10C675B140CUSTC675D002)
4. Run HuaweiUpdateExtractor_0.9.9.5 and select Honor 7x from drop down list. Now in Extract tab locate UPDATE.APP and right click any file and select extract all.
5. Repeat again for second UPDATE.APP file.
6.
a. Reboot to TWRP and copy system.img, product.img, vendor.img, version, cust.img to memory card
b. Tap install and tap image
c. Select system.img and choose system
d. Repeat for all images you copied in step 6. a
7. Wipe data and reboot to system
8. Once system boots up, reboot to TWRP
9. Copy your backed up product, version and cust images to memory card and flash using TWRP (see steps 6.a and 6.b)
10. Flash the the ota of your variant (update_BND-L22_hw_in.zip for india)
Reboot
For better understanding, watch the video
Join Telegram group if you are willing to test latest stuff.

reserved

reserved 2

Suppose for TL10 is the same process with your corresponding files, yes?
Enviado desde mi BND-TL10 mediante Tapatalk

valeriogerva said:
Suppose for TL10 is the same process with your corresponding files, yes?
Enviado desde mi BND-TL10 mediante Tapatalk
Click to expand...
Click to collapse
Process will be same but files will not
Sent from my BND-AL10 using Tapatalk

Dumb question: I can't install the latest BND-AL10 on my BND-L21 phone right? There are some hardware restrictions, or something like that?
Because I swiped my OS accidently three weeks ago, and I don't have other phone so... If I can have basic functions of the Honor 7X waiting for the official BND-L21 STOCK ROM, it's ok for me.
Thanks a lot, sorry for this stupid question...

k0pernicus said:
Dumb question: I can't install the latest BND-AL10 on my BND-L21 phone right? There are some hardware restrictions, or something like that?
Because I swiped my OS accidently three weeks ago, and I don't have other phone so... If I can have basic functions of the Honor 7X waiting for the official BND-L21 STOCK ROM, it's ok for me.
Thanks a lot, sorry for this stupid question...
Click to expand...
Click to collapse
It'll work just fine if you just wiped system
Make backup of other Partitions and follow the guide same way
Sent from my BND-AL10 using Tapatalk

Why does the Firmware Finder not show the BND-L24C567B130 update?
I installed this OTA update on my new L24, but didn't think to capture the update.zip at the time.

Sudeep Duhoon said:
Things Needed:
Join Telegram group if you are willing to test latest stuff.
Click to expand...
Click to collapse
I tried this guide but could not succeed in manual update! Device doesn't boot at all. Am i missing some crucial step.
It worked perfectly.

SVR said:
I tried this guide but could not succeed in manual update! Device doesn't boot at all. Am i missing some crucial step.
It worked perfectly.
Click to expand...
Click to collapse
You meant this sleek? How to get Indian AL10 worth Google play? The

Clarification ---
I had an Honor 7x BND-L24 but because I could not find stock firmware I returned it as I was afraid to root it without being able to restore to factory reset version.
So if I understand from your post, I can use another firmware set and it will work just fine by following your steps?
1. What firmware do you suggest we use?
2. In one of your posts you mentioned - "Make backup of other Partitions and follow the guide same way" - How is this accomplished?
If I can find a way to root this phone and then factory reset it, I would buy it again.

[GUIDE] How to skip RMM STATE: PRENORMAL and install TWRP

Dear members, i don't see the way how to skip 7 days of waiting on oreo on xda (OEM LOCK and RMM STATE: PRENORMAL).
But i found one.
Note: THIS DOES TRIP KNOX.
Download any ROM before December(Nougat) for your device.
Then, using ODIN and download mode flash that ROM. After setting UP device will not have RMM state in Download mode and you will se OEM unlock in Dev settings.
Now you can flash twrp and get custom ROM (Nougat or Oreo)
DISCLAIMER: I AM NOT RESPONSIBLE FOR BRICKED DEVICES, FOLLOW TUTORIAL AT YOUR OWN RISK.
INTERNAL STORAGE WILL BE COMPLETELY WIPED CLEAN (IF YOU USE CSC_OXM), MAKE SURE YOU BACKUP BEFORE FLASHING.

https://forum.xda-developers.com/sa...w-to/guide-root-install-twrp-samsung-t3747535
you can press thank's button for them

SmailkO said:
Dear members, i don't see the way how to skip 7 days of waiting on oreo on xda (OEM LOCK and RMM STATE: PRENORMAL).
But i found one.
Note: THIS DOES TRIP KNOX.
Download any ROM before December(Nougat) for your device.
Then, using ODIN and download mode flash that ROM. After setting UP device will not have RMM state in Download mode and you will se OEM unlock in Dev settings.
Now you can flash twrp and get custom ROM (Nougat or Oreo)
DISCLAIMER: I AM NOT RESPONSIBLE FOR BRICKED DEVICES, FOLLOW TUTORIAL AT YOUR OWN RISK.
INTERNAL STORAGE WILL BE COMPLETELY WIPED CLEAN (IF YOU USE CSC_OXM), MAKE SURE YOU BACKUP BEFORE FLASHING.
Click to expand...
Click to collapse
ODIN Does not allow Bootloader downgrade.

JazonX said:
ODIN Does not allow Bootloader downgrade.
Click to expand...
Click to collapse
yes it does. At least this time it does - I have flashed back to Nougat and then back to Oreo several times. If you don't want to be locked out once you have flashed OREO - you can use ODIN to flash a NOUGAT ROM and it will work. I know you can, I have done it.

Work! Thanks ?

JazonX said:
ODIN Does not allow Bootloader downgrade.
Click to expand...
Click to collapse
Who told U that, downgraded BL so many times in Odin.

rajkabul said:
Who told U that, downgraded BL so many times in Odin.
Click to expand...
Click to collapse
Can you explain how you did, So I can try again?
In my Note 7 - It didn't happen. Got a Fail error in ODIN.

JazonX said:
Can you explain how you did, So I can try again?
In my Note 7 - It didn't happen. Got a Fail error in ODIN.
Click to expand...
Click to collapse
Nougat and Oreo firmwares for the S8 are same binary. So you can downgrade.
For The Note Fan Edition, you can't downgrade from binary 2 to binary 1

New way
BlackMesa123 said:
Hello everybody. I got interested about this problem since my friends @Yahia Angelo and @corsicanu got the "Only official released binaries are allowed to be flashed" problem, so we decided to search deeply about this. We found out that this problem isn't related to FRP/OEM Unlock (even if enabled same problem comes), but to a new prop that you can see in Download Mode (RMM State: Prenormal). By searching in system, seems this prop is related to a new "thief" protection Samsung added in latest firmwares. Let's make an example: you get the device, setup Google Account, all good... then someone steals the device and wipes it... ok. After wipe he boots, but he can't pass the setup without internet, and when he connects to internet it asks for your Google account, since your account is saved in FRP partition, so he can't setup. This RMM State is more than that simple FRP, as it doesn't allow him to flash custom binaries to remove FRP. So now let's cut to the chase: who still doesn't have this RMM lock can avoid to get the device locked by following these two simple steps:
1. In build.prop, make sure "ro.security.vaultkeeper.feature" property is set to 0, like this:
Code:
sys.use_fifo_ui=0
ro.wsmd.enable=true
ro.security.vaultkeeper.feature=[COLOR="Blue"]0[/COLOR]
keyguard.no_require_sim=true
ro.carrier=unknown
2. Remove Rlc app. To do this go in "/system/priv-app" folder with a root file manager or with twrp file manager and remove "Rlc" folder.
For those who unfortunately has RMM State set to "Prenormal", as this user reports, seems that by keeping your phone running without shut it off/reboot, at a certain device running time value RMM State prop will set again to "Normal", so you can flash custom binaries again, if it works to you make sure to follow the above steps to not get locked again, I'll keep you guys updated about this when there will be news.
EDIT:
In attachments now you can find a zip that does the job for you. So when RMM State is set back to "Normal", flash a custom recovery and then flash this zip file to avoid lock again
Click to expand...
Click to collapse
UPDATE
rady96 said:
...................Odin flash fails fixed 100% solutions..................Explanation to why odin fails
When your s8/ s8+ is forced rebooted by holding the power and volume down buttons or crash reboots. And when booting into download mode for some reason download mode is locked or corrupted and Odin will fail even if you use official device specific firmware. So follow the steps below to fix
How to fix!
1. Boot into download mode by pressing ( power + volume down + Bixby button) and stop at the screen of continue and reboot.
2. Press volume down to restart phone
3. Quickly boot back into download mode by pressing (power + volume down + Bixby button)
4. Press continue
5. Congratulations fully working now
Click to expand...
Click to collapse

T0nyCr said:
New way
Click to expand...
Click to collapse
of course you have to be Rooted to do it manually and you have to have TWRP installed to flash the fix - so either way - if you can't flash because fo the Official Binaries Only warning - you will have to wait 7 days, 168 hours before you can flash again - or flash the NOUGAT BL as suggested by the OP.
FYI - there is an OREO ROM called Minotaurus (Find it on Telegram) that you can use while on the NOUGAT BL - so you can enjoy the benefits of OREO by first going to back to the last NOUGAT Firmware in ODIN - then flashing MINOTAURUS ROM (V19) - OREO Rom. (It is an excellent rom!)

Obviously this isnt for G955U??

Geekser said:
yes it does. At least this time it does - I have flashed back to Nougat and then back to Oreo several times. If you don't want to be locked out once you have flashed OREO - you can use ODIN to flash a NOUGAT ROM and it will work. I know you can, I have done it.
Click to expand...
Click to collapse
Thats because both nougat(Nov and DEC builds) and oreo are on V2 bootloader at the moment. ODIN DOES NOT allow bootloader downgrade. infact its the phone and not even ODIN controlling that.

It's binary 1, not 2
Envoyé de mon SM-N935F en utilisant Tapatalk

Doesn't work
T0nyCr said:
New way
UPDATE
Click to expand...
Click to collapse
New way (updated) doesn't work, still prenormal rmm state, still can't flash

gastondh91 said:
New way (updated) doesn't work, still prenormal rmm state, still can't flash
Click to expand...
Click to collapse
Just downgrade if you got the S8 or S8+
Envoyé de mon SM-N935F en utilisant Tapatalk

benyou54 said:
Just downgrade if you got the S8 or S8+
Envoyé de mon SM-N935F en utilisant Tapatalk
Click to expand...
Click to collapse
Yeah sure, i have nougat working with no prenormal rmm state but i want to have oreo with no prenormal and when i flash with odin it gets to prenormal again even if do that power+ vol- + bixbie trick, it doesn't work

gastondh91 said:
Yeah sure, i have nougat working with no prenormal rmm state but i want to have oreo with no prenormal and when i flash with odin it gets to prenormal again even if do that power+ vol- + bixbie trick, it doesn't work
Click to expand...
Click to collapse
The prenormal state goes away after 7 days. You have to wait 7 days with the phone turned on. There is no trick to make the rmm state disappeared from the download. Just wait 7 days then flash twrp, magisk and rmm fix [emoji106]
Envoyé de mon SM-N935F en utilisant Tapatalk

Do I have to flash to pure stock or can I stay on a nougat backup for 7 days?

Smartphones13 said:
Do I have to flash to pure stock or can I stay on a nougat backup for 7 days?
Click to expand...
Click to collapse
I don't know what you mean by nougat backup ? You just have to wait 7 days with your FE turned on, that's all.
Envoyé de mon SM-N935F en utilisant Tapatalk

so once I go back to stock rom I just need to wait 7 days with no reboots right?

Oreo On NXT-L09 and L29

Install oreo AL10 chinese version on Mate 8 L09
1. You have to be in nougat, install the rollback to marshmallow creating on your MicroSD a folder named dload and inside this folder put the UPDATE.app, install with the 3 button combo or from the engineers menu, the change from l09 or 29 to al10 is only secure from android marshmallow..
2. Install the rom B100 with the 3 button combo, if you have an unlocked bootloader it will relock, you must have to unlock the bootloader many times here (2 or 3)..
3. After the reboot on the dload folder put the rom NXT-C00B129SP02, unzip this on dload and at the root of the sd put the OemInfo-all_cn.zip.
4. Now you have marshmallow with the NXT-C00B129SP02... flash TWRP via fastboot i will upload all this files.
5. Start the TWRP and flash OemInfo-all_cn.zip
6. Restart the phone on bootloader, flash the stock recovery, restart from adb (fastboot reboot) and when the screen turns black press the up and down volume buttoms to flash the dload... dont let the phone boot winouth installing the dload.
7. Now afther installing this you must be booting on marshmallow chinese version, some times this will take some time to boot, always leave it, if you wish you can update to 8 via ota but you probably aren't gonna have imei or signal, on your sd create a folder named B596 there you have to put HuRUpdater_0.4.zip and update.zip from B596 (everything uploaded in the pack).
8. Now flash TWRP marshmallow again, install the HuRUpdater_0.4.zip in B596 ( when the phone vibrates press the volume down button to install ), when it's ready reboot the phone.
9. Now you have Nougat chinese version ( no signal yet ), on your sd create a folder named B834 ( i will upload everything just to copy and paste) and there you will have the HuRUpdater_0.4.zip and update.zip... update_data_public.zip files..
10. InstallTWRP Nougat and flash the HuRUpdater_0.4.zip.
Now reboot the phone and wait, this will take time but it starts..
L29 To al 10:
You must check on Firmware Finder if your phone accepts the Oreo update.
1. Downgrade to Emui 4.0 any version..
2. With SRK tools change oeminfo y custom.bin to AL10. (You must have unlocked bootloader and root)
3. Download the NXT-AL10C00B172 rom and install with the 3 button combo.
4. Now you will have marshmallow with no signal.
5. Conectar to WiFi and update via ota to the last version, it will be 4 or more, install all versions
6. You will finish with B596
7. With B596 install Firmware Finder y search for this rom (NXT-AL10C17B828 (8.0.0.828), FF-No.: 152726) (Install it via Proxy).
8. Now you have Oreo B829 winouth signal.
9. Flash your cust ( from your region) via Fastboot with "fastboot flash cust cust.img"
9. Wipe everything (factory reset) and booting first time deactivate the updater, if you dont maybe there will be a permanent menssaje)
If you want open kirin!!
Flash via adb this command
fastboot flash system <name-of-rom-image-file>
Install TWRP Oreo, open TWRP, change language to english and search for the option fix encription, swipe to install the script and wipe data, all here on TWRP, now reboot to system and leave it boot, i have my NXT L09 from Colombia, running Oreo 8.1.0 with Openkirin Resurrection Remix OS, sorry for my bad english and i accept comments...
Link with everything for L09:
http://www.mediafire.com/file/eherlv3ht9xocg0/Files.rar
Link with everything for L29:
https://mega.nz/#F!L9RlXSiJ!BZ8Lzu5f0G3QvTYHLDrVNA

Una explicación desde el numeral 6, Ojalá en español soy de Colombia, amigo gracias para el mate 8 nxt-L09
No entiendo lo del gestor de arranque entre otros
An explanation from numeral 6, I hope in Spanish I am from Colombia, friend thanks for mate 8 nxt-L09 I do not understand what the boot manager among others

juanchos650 said:
Una explicación desde el numeral 6, Ojalá en español soy de Colombia, amigo gracias para el mate 8 nxt-L09
No entiendo lo del gestor de arranque entre otros
Click to expand...
Click to collapse
https://www.htcmania.com/showthread.php?t=1441276

Can you upload other screenshots? Of the three it only opens first

are there any major bugs you found on openkirin?

Phone Model "Unknown"
Hey thanks for the sweet tutorial. Amazingly simple but worked so well unlike some others I have seen. Bricked my Mate 8 so many times I still skeptical of the fact that I am actually on Oreo. Thanks dude.
I just have one problem though. My phone model says unknown in the about screen. How can this be rectified? Really hoping you can assist.

Hi, great tutorial, I was just wondering. Is it possible to use any other rom for the AL10 then the chinese one?

nobody will share his experience about this rom on l09? Stability? Bugs?​
PD: Step 4 is wrong.. at that point we only have that version on dload but not installed.
PD2: Can't install twrp oreo, must use fastboot flash recovery_ramdisk RECOVERY.img

E_N_Y said:
Hi, great tutorial, I was just wondering. Is it possible to use any other rom for the AL10 then the chinese one?
Click to expand...
Click to collapse
Sorry for this time, I wish I could help you today, you can change the al10 to l09, search about it, the you can install any l09 rom or go back to al10

rophiroth said:
nobody will share his experience about this rom on l09? Stability? Bugs?​
PD: Step 4 is wrong.. at that point we only have that version on dload but not installed.
PD2: Can't install twrp oreo, must use fastboot flash recovery_ramdisk RECOVERY.img
Click to expand...
Click to collapse
Thank you for your help! I forgot to explain that, I can say this about the rom, 5 months using it, really good, I think the charge is fast than stock, I thing, never metered, no bugs at all, very functional.. :laugh:

No bugs at all? I'm full of graphic bugs when using split or multiple window...

Can someone explain why we even get signal? in the tutorial since the debranding on all AL10 roms there is no sim detection, and when it comes to HuRUpdate the oreo stock al10 rom it works... The rom has some modifications?

L29 download link not work

What is the latest version of oreo (before patches01-02)? and which of the 5 files should I put, I always have in the system compilation
update.zip
update_full_NXT-AL10_all_cn.zip
update_full_NXT-TL00_cmcc_cn.zip
update_full_NXT-DL00_dualcu_cn.zip
update_data_full_public.zip
update_full_NXT-CL00_telecom_cn.zip

"Restart the phone on bootloader, flash the stock recovery"
On step 6, can someone kindly explain which file is the stock recovery image i need to flash?
I answered my own question.... I used Huawei Extractor and used recovery.img from the update.app of the al10 rom.
I finished all the steps, and now my phone is now on Android 8 Emui 8, THANK YOU SO MUCH
but ...........
I am missing all google apps.!!! and the system will not allow me to add a google account,
Is this expected? the same situation for everyone else?

ngg71 said:
"Restart the phone on bootloader, flash the stock recovery"
On step 6, can someone kindly explain which file is the stock recovery image i need to flash?
I answered my own question.... I used Huawei Extractor and used recovery.img from the update.app of the al10 rom.
I finished all the steps, and now my phone is now on Android 8 Emui 8, THANK YOU SO MUCH
but ...........
I am missing all google apps.!!! and the system will not allow me to add a google account,
Is this expected? the same situation for everyone else?
Click to expand...
Click to collapse
Search play store apk on Google, it is the first result, install it and go.

Experiencing graphic bugs also. Camera app freezes lower half image sometimes. Also, I set the region and language to my country (Colombia) but some system menus pop up in chinese, (dont know what they say) , unable to change or apply themes, some apps wont install from the huawei app store, and sometimes the browser wont connect to websites. On the plus side, the phone is very fast and battery is great.
How can I rollback to L09 nogaut or marsmallow version?? I tried starting the tutorial from the beginning and rollback to marsmallow, but all the update.app files that I used from the tutorial failed using the recovery menu.

ngg71 said:
Experiencing graphic bugs also. Camera app freezes lower half image sometimes. Also, I set the region and language to my country (Colombia) but some system menus pop up in chinese, (dont know what they say) , unable to change or apply themes, some apps wont install from the huawei app store, and sometimes the browser wont connect to websites. On the plus side, the phone is very fast and battery is great.
How can I rollback to L09 nogaut or marsmallow version?? I tried starting the tutorial from the beginning and rollback to marsmallow, but all the update.app files that I used from the tutorial failed using the recovery menu.
Click to expand...
Click to collapse
it's the same process, but vice versa ...
https://m.facebook.com/story/graphq...wMDAwMDgwNjQ0MjU0MTpWSzo4OTIxMDg3OTc2NTA3NjU=

So anyone bugless?? I only upgrade to oreo without bug with another method... that don't have network available :'c... I dont know how to have both at the same time

For Signal Fix No need to flash your region cust follow these steps.
1.open any root explorer
2.goto /cust/all/cn/prop and rename local.prop to local.prop.bak
3.restart and wait for 10 seconds
I know its ugly but it works and you won't lose updater too.

No OS Phone bricked Help Please

Hello
i make an error when i flash with TWRP
Now i cant solve this error ...
I test flash miui rom and crdroid
I test flash with xiaomi flash with fastboot rom
Anything dont work :crying:
Please help me (sorry for my bad english)

nosif said:
Hello
i make an error when i flash with TWRP
Now i cant solve this error ...
I test flash miui rom and crdroid
I test flash with xiaomi flash with fastboot rom
Anything dont work :crying:
Please help me (sorry for my bad english)
Click to expand...
Click to collapse
This is the procedure to install custom ROMs on the Redmi Note 7, if you follow it you shouldn't have any problems:
1. Download flashable_vbmeta.zip, the ROM you want, the OpenGapps you want and mount_system_lavender.zip (You can find those files in the Telegram group of this ROM)
2. Put the downloaded files in a SD card on your phone or in your computer
3. Go to TWRP and flash flashable_vbmeta.zip
4. Format data and wipe system, data, cache and dalvik cache partitions
4-a. (Only do this if you saved your files in a computer) Connect your phone to the computer and pass all the files using the adb push "file's name" /mnt command
5. Flash the ROM you want
6. Flash mount_system_lavender.zip and then the OpenGapps you want
7. Reboot to system

AdRi_232 said:
This is the procedure to install custom ROMs on the Redmi Note 7, if you follow it you shouldn't have any problems:
1. Download flashable_vbmeta.zip, the ROM you want, the OpenGapps you want and mount_system_lavender.zip (You can find those files in the Telegram group of this ROM)
2. Put the downloaded files in a SD card on your phone or in your computer
3. Go to TWRP and flash flashable_vbmeta.zip
4. Format data and wipe system, data, cache and dalvik cache partitions
4-a. (Only do this if you saved your files in a computer) Connect your phone to the computer and pass all the files using the adb push "file's name" /mnt command
5. Flash the ROM you want
6. Flash mount_system_lavender.zip and then the OpenGapps you want
7. Reboot to system
Click to expand...
Click to collapse
OP try his method. If it doesn't work just download fastboot Rom in your pc and flash it.

Not work [emoji26]
I have some error
Envoyé de mon Redmi Note 5 en utilisant Tapatalk

!!!!!!!Root2!!!!!! said:
OP try his method. If it doesn't work just download fastboot Rom in your pc and flash it.
Click to expand...
Click to collapse
I test with Xiaomi flash in fastboot mode but the process during 2sec and Say success
No os install when reboot...
Envoyé de mon Redmi Note 5 en utilisant Tapatalk

U have formated this partitions. Why? U have backup ? Try to recover. ( i dont think it will work, but u dont have much options now)
I dont know that it will work on this phone but u can try to fastboot stock boot.img and reflash STOCK rom.
Good luck.

zlata said:
U have formated this partitions. Why? U have backup ? Try to recover. ( i dont think it will work, but u dont have much options now)
I dont know that it will work on this phone but u can try to fastboot stock boot.img and reflash STOCK rom.
Good luck.
Click to expand...
Click to collapse
I make an error when i wipe i dont have backup
Envoyé de mon Redmi Note 5 en utilisant Tapatalk

nosif said:
I make an error when i wipe i dont have backup
Envoyé de mon Redmi Note 5 en utilisant Tapatalk
Click to expand...
Click to collapse
last option is to fastboot back to miui, it will remove twrp but at least it will save your phone.

nosif said:
I make an error when i wipe i dont have backup
Envoyé de mon Redmi Note 5 en utilisant Tapatalk
Click to expand...
Click to collapse
Sorry to hear that. Number one rule when u get TWRP is to make backup! U dont rush things.

Flash stock rom with miui flash tool, try to downgrade to lower firmware version and don't check option to relock bootloader because this will hardbrick your device when you have root and non stock rom..

Xiaomi flash doesnt work
Flash during 2sec
I flash cust systèm and boot with adb
I boot in miui but wifi dont work
I try flash miui with twrp but a i have error 7 ...
Envoyé de mon Redmi Note 5 en utilisant Tapatalk

nosif said:
Xiaomi flash doesnt work
Flash during 2sec
I flash cust systèm and boot with adb
I boot in miui but wifi dont work
I try flash miui with twrp but a i have error 7 ...
Envoyé de mon Redmi Note 5 en utilisant Tapatalk
Click to expand...
Click to collapse
Hello,
Have you tried MiFlash in EDL mode? (Fastboot_edl-v2 .rar attachment)
In the MiA2 you can enter the EDL mode with the command "fastboot reboot-edl".
I do not know if this works for the RN7.
Regards!

Its okay
I solved it
I flash with ADB old miui boot cust system
I boot and I make update with miui
Thanks all for your help
Envoyé de mon Redmi Note 7 en utilisant Tapatalk