Honor 7 Premium Stock images. (PLK-L01) / Stock ROM. - Honor 7 General

Need those for flashing from Fastboot.
All of them system,boot,recovery and others.
My situation in shortly:
*I unlock my Bootloader and installed "Chinese TWRP" on it.
*After that my device rebooted normally once, after second reboot that start reboot only to the fastboot or the TWRP.
*Then i reformat whole device and tried to install Modaco customROM at first try, that bring me "Bootloop" and i was on that situation like 2days almost.
Then things starts resolve and with speed, heres the steps how i unbick my device and got flashed latest firmware inside of it and i finally update to the B330 and then moved to the YodaROM v8.
1. I talked with multiple users on this forum and on others boards, and then i got great advices from user: inside!out.
2. He told me right region code for my phone and package where i should to start look and unbrick my device, also i used hes "Honor 7 MultiTool" for unbrick my device.
-First i resolve what is my device region code (My was: C432) and then i look B180 FULL update package with my region code.
-Then i install HuaweiExtractor like the MultiTool says on the instructions, and after that is installed my PC i take out .img files from that "Update.app" file to separately.
-After that is done i move those to the "Unbrick" folder on MultiTool, and i unbrick my device with those B180 files, and also placed that B180 "Update.app" file to my device's SDCard under /dload folder.
-When unbricking was done my device rebooted normally with 5.0.2 version of android and with 3.1 version of EMUI.
Part of updating:
-Downloaded B330 files what match to with my region code and location.
-Then i move that B330 "Update.app" file to my SDCard under /dload folder, and then i reboot my phone with (3-Button) method and i start recovery.
(with USB-Cable plugged i reach 95% and without cable i reach 19% always).
-Tested that multiple times and always same thing, not sure was the problem on my SDCard or what, but i change it to another. And now i flash B180 files over again.
-Again i moved B330 "update.app" to the SDCard on /dload folder, and started recovery with (3-button) method. Suddenly now that update reach 95% and then got FAIL.
-Rebooted my device normally and WTF? there was B330 inside with 6.0 android even that recovery FAILS at 95%.
-After that i flash TWRP again and Downloaded YodaROM v8 what i push to my SDCard and installed that trought TWRP with instructions.
-Same thing with Xploited app, you can find instructions for it from YodaROM thread.
Files what i used on whole operation:
Honor MultiTool.
TWRP 3.0.2-0.
Honor 7 C432B180 and C432B330 packages.
HuaweiUpdateExtractor.
YodaROM v8.
Xposed Framework for arm64 sdk23.

kenkae said:
Need those for flashing from Fastboot.
All of them system,boot,recovery and others.
Click to expand...
Click to collapse
The same of Honor 7
Отправлено с моего PLK-L01 через Tapatalk

inside!out said:
The same of Honor 7
Отправлено с моего PLK-L01 через Tapatalk
Click to expand...
Click to collapse
Tried to install differend ROMs what i have found for it, still that stands on loading screen "Honor powered by Android"
Also tried to flash couple differend image sets but with no results. Just looking something what works and i can get my phone to use again. :laugh:

kenkae said:
Tried to install differend ROMs what i have found for it, still that stands on loading screen "Honor powered by Android"
Also tried to flash couple differend image sets but with no results. Just looking something what works and i can get my phone to use again. :laugh:
Click to expand...
Click to collapse
Your firmware build? Full symbols
Отправлено с моего PLK-L01 через Tapatalk

inside!out said:
Your firmware build? Full symbols
Отправлено с моего PLK-L01 через Tapatalk
Click to expand...
Click to collapse
Where i can check that, cant boot to the system with my phone. And also i can use custom recovery what i can flash there TWRP and Fastboot when im Bootloader.
On package i can see mark: 51710NEL-D and that PLK-L01 - ROM: 32GB

Hi. I have an Honor 7 premium also. I think the right designation is "enhanced edition" its 32 GB ROM and it came with version PLK-L01 C900B188 so I guess you should have the same version. I tried to update to B330 but it fails at 2% and reboot.
Enviado do meu EVA-L09 através de Tapatalk

Ups, you have c900 custom version. Honor 7 standard has c432
Отправлено с моего PLK-L01 через Tapatalk

Yes. I asked honor what version should I update and they told me to use honor.UK for download. I've downloaded C432B180 and C432B330b but neither one install correctly.
Enviado do meu EVA-L09 através de Tapatalk

HmMarques said:
Yes. I asked honor what version should I update and they told me to use honor.UK for download. I've downloaded C432B180 and C432B330b but neither one install correctly.
Enviado do meu EVA-L09 através de Tapatalk
Click to expand...
Click to collapse
C432 is West Europe. C10 is Russia.
C900 I don't know. Seeking for C900 firmware.
Отправлено с моего PLK-L01 через Tapatalk

Thank you, I've been searching for some time, but no luck.. They keep saying to use Honor.UK for firmware download.
Enviado do meu EVA-L09 através de Tapatalk

Ask honor.UK for vendor_update.app for change to c432.
My honor was c10, but Russian firmware still b140. I update to c432 with vendor_update.app that honor EU provide to me. And I had b330 now. It's for locked BL, I haven't root.
Отправлено с моего PLK-L01 через Tapatalk

Still got the problem, yes this is that Honor 7 Premium 32GB the "new model"
Still facing that boot problem with some of files boot starts automaticly restarting after 5 seconds and with other files that just stand on that "Honor" loading screen at the beginning
And if that helps anything i live in Finland..

kenkae said:
Still got the problem, yes this is that Honor 7 Premium 32GB the "new model"
Still facing that boot problem with some of files boot starts automaticly restarting after 5 seconds and with other files that just stand on that "Honor" loading screen at the beginning
And if that helps anything i live in Finland..
Click to expand...
Click to collapse
Try to unbrick from same firmware files with my multi-tool
Отправлено с моего PLK-L01 через Tapatalk

inside!out said:
Try to unbrick from same firmware files with my multi-tool
Отправлено с моего PLK-L01 через Tapatalk
Click to expand...
Click to collapse
What you mean with same files?
Dont got any working backups from my stock files from the phone, thats why i need to know what is firmware where im going to flash correct files/ROM for it. Every tip/hint are welcome!
EDIT: And if i forgot to tell my phone is atm totally empty there is nothing anymore inside, and now started flashing unbricking with your Multitool from: PLK-L01C432B100
And im thinking to try unbrick with every package, let see what that gives to me. Lets hope we can resolve this soon! -,-
Packages from: http://forum.xda-developers.com/honor-7/general/plk-l01-firmwares-updates-official-beta-t3272205
That helps lots of if someone got ORIGINAL ROM taked instantly before doing any modifications, dont know why my backup file was corrupted and wasnt work so im now in bad situation.
What happens:
*Downloaded (Honor 7_Firmware_PLK-L01_Andriod 6.0_EMUI4.0_C432B330b_France_Germany_Spain_Holland_Italy.zip)
*Flashed .img's with Honor Tool with Unbrick option -> moved update.app file to SD card under the folder /dload.
*Boot stands still with "Honor" logo but when i do "3 button reboot" and start updating that will happen with USB cable insted of WIFI but that got stucked at 5%.
(Earlier that update tried to go trought WIFI and always got failed instantly)
**Installed B180 Boot and Recovery.img and now i have access login to my WIFI, still after i login there and started download recovery package trought WIFI that got FAILED almost instantly.
More coming when i got something new what is good to inform...

I promise 50$ reward with Bitcoins/Skrill/PayPall or Finland Bank Transfer to person who help me out of this grave.

kenkae said:
I promise 50$ reward with Bitcoins/Skrill/PayPall or Finland Bank Transfer to person who help me out of this grave.
Click to expand...
Click to collapse
Answer step by step, what you had and what you did.
Отправлено с моего PLK-L01 через Tapatalk

inside!out said:
Answer step by step, what you had and what you did.
Отправлено с моего PLK-L01 через Tapatalk
Click to expand...
Click to collapse
Phone= Huawei Honor 7 PREMIUM ROM: 32GB | PLK-L01 ??????? | Country: Finland | Bootloader UNLOCKED
Link to the device what i have on my hands atm: https://kauppa.saunalahti.fi/?&_ga=1.32807035.453105054.1462124093#!/puhelimet/Honor-7-Premium
*: Opened my device from box -> tested it couple hours.
**: Then i unlock bootloader with instuctions with received OEM UNLOCK code from huawei
***: Installed Chinese lang TWRP with instuctions that can be found on this forum:
***: I Boot my phone normally to the System and that works normally, after i reboot again my phone only reboot to the Chinese TWRP.
**** Tried factory reset and all but not works, still i got always booted to the Chinese TWRP.
*****: Flashed custom ROM if i remember right that was http://forum.xda-developers.com/honor-7/development/rom-r1-modaco-custom-rom-t3339554
*****: Faced same problem, then ERASE every section totally from the phone and tried again.
******: Now i have flashed uncountable amount of differend boot and recovery images without any results. Phone just reboot after reboot or stands on "Honor" loading screen at the start.
*******: Where im now, i have erased again total phone and sdcard, then i created /dload folder to the sdcard and i move B180 update.app to the SDCARD. Then i flash that Boot and Recovery image from B180 and i start (3-Button restart) what is called "Erecovery" and that started download/install that recovery trought USB now and got stucked in 90%.
I know there is a solution to get this back to work, and that solution is correct files what match with my device. Dont have got any devices to this situation before. Bad thing is the i dont remember unlock code for relock it again and i have unlocked bootloader so that can be effect to my warranty.

kenkae said:
Phone= Huawei Honor 7 PREMIUM ROM: 32GB | PLK-L01 ??????? | Country: Finland | Bootloader UNLOCKED
Link to the device what i have on my hands atm: https://kauppa.saunalahti.fi/?&_ga=1.32807035.453105054.1462124093#!/puhelimet/Honor-7-Premium
*: Opened my device from box -> tested it couple hours.
**: Then i unlock bootloader with instuctions with received OEM UNLOCK code from huawei
***: Installed Chinese lang TWRP with instuctions that can be found on this forum:
***: I Boot my phone normally to the System and that works normally, after i reboot again my phone only reboot to the Chinese TWRP.
**** Tried factory reset and all but not works, still i got always booted to the Chinese TWRP.
*****: Flashed custom ROM if i remember right that was http://forum.xda-developers.com/honor-7/development/rom-r1-modaco-custom-rom-t3339554
*****: Faced same problem, then ERASE every section totally from the phone and tried again.
******: Now i have flashed uncountable amount of differend boot and recovery images without any results. Phone just reboot after reboot or stands on "Honor" loading screen at the start.
*******: Where im now, i have erased again total phone and sdcard, then i created /dload folder to the sdcard and i move B180 update.app to the SDCARD. Then i flash that Boot and Recovery image from B180 and i start (3-Button restart) what is called "Erecovery" and that started download/install that recovery trought USB now and got stucked in 90%.
I know there is a solution to get this back to work, and that solution is correct files what match with my device. Dont have got any devices to this situation before. Bad thing is the i dont remember unlock code for relock it again and i have unlocked bootloader so that can be effect to my warranty.
Click to expand...
Click to collapse
Ok. Thanks for details. What firmware you had from box before these actions?

inside!out said:
Ok. Thanks for details. What firmware you had from box before these actions?
Click to expand...
Click to collapse
I thank the person who knows that, dont runned bigger updates or nothing before i take my own actions. Clearly dont know my firmware when i do those actions.
Thats helps alot if i can resolve that somehow,

kenkae said:
I thank the person who knows that, dont runned bigger updates or nothing before i take my own actions. Clearly dont know my firmware when i do those actions.
Thats helps alot if i can resolve that somehow,
Click to expand...
Click to collapse
I try to help you. Modaco's ROM based on 330?
Отправлено с моего PLK-L01 через Tapatalk

Related

New B190 for Chinese model

http://emui.huawei.com/cn/plugin.php?id=hwdownload&mod=detail&mid=172
Seems it's not yet available via OTA
is there a change log?
lassie20 said:
is there a change log?
Click to expand...
Click to collapse
I'm interested too, searched for it but found nothing ..
Change log B190 :
楼主,
华为荣耀7 B190版本
更新公告及问题收集贴
升级方式:
1.分批在线升级(没有收到的还请耐心等候哈!)
2.SD卡下载完整包升级(已经发布)
更新推荐:
优化 手机通话及数据流量上网稳定性
优化 特殊场景通话性能及通讯录匹配,增强用户体验
优化 指纹匹配不正确时的马达震感
优化 屏幕概率性的点亮灰屏
应用:
更新 天际通应用,解决电信WLAN特殊场景下链接问题。
系统:
合入安全补丁增强系统安全性、稳定性
Google translation :
The landlord,
Huawei glory 7 B190 version
Update Bulletin and problem collecting stickers
Upgrade:
**** 1. Batch Online Upgrade (not received yet Please Wait Ha!)
**** 2.SD card Download the complete package upgrade (has been released)
Update Recommended:
**** Phone calls and data traffic optimization Internet stability
**** Special talk performance optimization and matching contacts scene, enhance the user experience
**** Optimization of the motor felt when incorrect fingerprint match
**** Optimize screen lighting probabilistic gray screen
** application:
**** Update sky-application, solve the next problem telecommunications link WLAN particular scene.
** system:
**** Fit into the security patches enhance system security, stability
i brick my al10 64gb ..now on bootloop.please someone help
warriorsach said:
i brick my al10 64gb ..now on bootloop.please someone help
Click to expand...
Click to collapse
It is easy, do you need download de rom (190) in the emui website
Afer that extrat the update.app and flash in fastboot "system", "boot" and "recovery"
You have tutorial in this link: http://forum.xda-developers.com/honor-7/general/guide-beginners-how-to-root-update-fix-t3255452
In other order of things, do someone know a twrp how works with his rom? (190) I tryed with 3 diferents and not works. With 188 i dont have any problems with twrp
bro i already have B188 update and i done the all things like extract files from update.app and then manually flash via fastboot,,,but those dosent work..and i m not able to boot in recovery i can only boot in to fastboot..
i already follow all instructions.
and i m not using europian version
im using PLK AL10 64gb model
warriorsach said:
bro i already have B188 update and i done the all things like extract files from update.app and then manually flash via fastboot,,,but those dosent work..and i m not able to boot in recovery i can only boot in to fastboot..
i already follow all instructions.
and i m not using europian version
im using PLK AL10 64gb model
Click to expand...
Click to collapse
I know that you have chinesse model, not eu, me too, but i put this tuturial because the steps are the same (not roms).
Maybe you could try with other adb tool (minimal adb fastboot works fine) and you can download the rom again. I had the same problem that you and i solve with this way (flashing system boot and recovery Of 190)
I hope that you can solve it soon
Tirizia said:
I know that you have chinesse model, not eu, me too, but i put this tuturial because the steps are the same (not roms).
Maybe you could try with other adb tool (minimal adb fastboot works fine) and you can download the rom again. I had the same problem that you and i solve with this way (flashing system boot and recovery Of 190)
I hope that you can solve it soon
Click to expand...
Click to collapse
you are the man..buddy finally solve, and overcome from bootloop, your combination are perfect. 1st system then boot and then recovery...thank you buddy god bless you.
It is famous problem with twrp for Honor 7 - often it loop after flashing.
You could pres all 4 buttons and it helps to regular boot!
Did you flash stock recovery to twrp?
warriorsach said:
you are the man..buddy finally solve, and overcome from bootloop, your combination are perfect. 1st system then boot and then recovery...thank you buddy god bless you.
Click to expand...
Click to collapse
I am glad to help! But i am the woman not the man haha
Enjoy your "new" Honor 7, friend
I have rooted B188 [PKL AL10]. I unrooted it, than updata to B190 than to 5.12.16 - all using local updata. I did not loose any data.
After that I received OTA to MM 6.0 (ROM 6.1.1) - instaled via OTA.
All my personal data are ok.
But now I do not know if it is possible to root MM 6.0 Rom 6.1.1?

EMUI 4.0 Android 6.0.1 KIW-L21 C185 (Middle East Version)

Warning : I am not responsable for any bricked devices, dead sd cards, or other issues, I just wanted to share this, because I know, there are many Honor 5x KIW-L21 C185 users, and this, in my case, worked.
Warning :
***This will turn your device into a single sim phone.***
This WILL CHANGE your CUST version to 432.
Because I couldn't wait anymore for the official MM update from Huawei. I managed to install EMUI 4.0 Android 6.0.1 on my KIW-L21 C185, Middle East Version following this steps here: http://forum.xda-developers.com/showpost.php?p=67851428&postcount=2 .
1. You need to install TWRP, obviously . http://forum.xda-developers.com/devdb/project/dl/?id=19454
2. Download mm-update from here http://forum.xda-developers.com/devdb/project/dl/?id=19446 and extract files, you should be seeing 2 image files : TZ.img and MODEM.img .
3. Download and install Huawei Update Extractor http://forum.xda-developers.com/showthread.php?t=2433454 .
4. In my case, I downloaded this firmware here http://download-c.huawei.com/download/downloadCenter?downloadId=84663&version=327467 .
5. Now, using the Huawei Update Extractor, open the downloaded firmware and extract BOOT.img , CUST.img , SYSTEM.img on your computer.
6. Reboot phone in recovery mode and make a full TWRP backup.
7.Wipe data/factory reset and then wipe system, Data, Cache, Cust, Dalvik/Art Cache.
8. Install, and in the bottom of the screen, choose install image as following:
I. BOOT.img install to Boot.
II. CUST.img install to cust_image.
III. SYSTEM.img install to system_image.
IV. TZ.img install to tz_image.
V. MODEM.img install to modem_image.
9. After installing all of the above files, just reboot and there it is.
Untill now, I haven't found any bugs or issues, except that in the 'About Phone' panel at Model Number it doesn't say anymore KIW-L21 , but says 'MSM8916 for arm64'.
Screenshots
Is it stable and all options working
Sent from my KIW-L21 using Tapatalk
kevoxy said:
Is it stable and all options working
Click to expand...
Click to collapse
So it seems, in my case,everything is working, no FC's , camera working fine in professional mode, extends battery life.
Only thing I didn't try is going back to stock C185 Rom.
Also,didn't try flashing others rom,because I really like how it's working on EMUI 4.0
hi boro Im flash this rom in honor 5x kiw-l21c185b140 everything good just rom one sim card not dual sim???
mammadpsy said:
hi boro Im flash this rom in honor 5x kiw-l21c185b140 everything good just rom one sim card not dual sim???
Click to expand...
Click to collapse
Never tried using dual sim mod,as I only use one sim, that I didn't check.
cosminvr27 said:
Warning : I am not responsable for any bricked devices'.
Click to expand...
Click to collapse
Hi, i flashed cm13 and i wanna do flash for this build because of change tz number to get newer builds of cm.
Is it work on cm 13 or i must have stock rom before doing flash, accidentally i removed my stock rom i think, and twrp backup didn't restored my previous rom.
Pls help. Tnx.
Sent from my KIW-L21 using XDA-Developers mobile app
najafi.ali.68 said:
Hi, i flashed cm13 and i wanna do flash for this build because of change tz number to get newer builds of cm.
Is it work on cm 13 or i must have stock rom before doing flash, accidentally i removed my stock rom i think, and twrp backup didn't restored my previous rom.
Pls help. Tnx.
Click to expand...
Click to collapse
I'm not sure, I would try going back to stock rom first , as I not know how would it affect flashing over CM. Try to revert to stock first , than do update,than flash CM again.
cosminvr27 said:
I'm not sure, I would try going back to stock rom first , as I not know how would it affect flashing over CM. Try to revert to stock first , than do update,than flash CM again.
Click to expand...
Click to collapse
You're right, I'll do that, but i didn't get back tu stock rom in my life, if i wanna do that how? Its like flashing cm? I didn't find KIW-L21 C185 VERSION stock rom for download anywhere, i don't know why.
Thanks again for your help ?
Sent from my KIW-L21 using XDA-Developers mobile app
najafi.ali.68 said:
You're right, I'll do that, but i didn't get back tu stock rom in my life, if i wanna do that how? Its like flashing cm? I didn't find KIW-L21 C185 VERSION stock rom for download anywhere, i don't know why.
Thanks again for your help ?
Click to expand...
Click to collapse
Here it is
http://click.xda-developers.com/api...d 5.1_EMUI 3.1_C185B130_Kuwait_Channel-Others
You have to put it on the sd card in dload folder than hold volume - , volume + and power , and the rest does it by itself..also, after , make sure you update to b140 , as it will ask for it after you configure the phone.
Tried installing twrp but didn't boot
And in twrp 3-0-0 doesn't have option to flash images in cust or tz partitions
cosminvr27 said:
e.
8. Install, and in the bottom of the screen, choose install image as following:
I. BOOT.img install to Boot.
II. CUST.img install to cust_image.
III. SYSTEM.img install to system_image.
IV. TZ.img install to tz_image.
V. MODEM.img install to modem_image.
9. After installing all of the above files, just reboot and there it is.
Untill now, I haven't found any bugs or issues, except that in the 'About Phone' panel at Model Number it doesn't say anymore KIW-L21 , but says 'MSM8916 for arm64'.
Click to expand...
Click to collapse
Hi, when.i wanna flash cust.img its not a cust partition to flash on to it, what is wrong? Is sth with my phone or my twrp version (3.0.2.0)?
najafi.ali.68 said:
Hi, when.i wanna flash cust.img its not a cust partition to flash on to it, what is wrong? Is sth with my phone or my twrp version (3.0.2.0)?
Click to expand...
Click to collapse
What partitions do you see ?
cosminvr27 said:
What partitions do you see ?
Click to expand...
Click to collapse
Boot and recovery, it can be fixed?
najafi.ali.68 said:
Boot and recovery, it can be fixed?
Click to expand...
Click to collapse
But you did revert to stock , right ?
cosminvr27 said:
But you did revert to stock , right ?
Click to expand...
Click to collapse
Yes, i flashed cm build of 18july @crpalmer, for newer builds and FP i need mm base because of tz number, i revovered my twrp.backup to stock and when i want to do your steps i see this problem.
It could be because of version of twrp? I donno how to change twrp.
Thanks for your help.
najafi.ali.68 said:
Yes, i flashed cm build of 18july @crpalmer, for newer builds and FP i need mm base because of tz number, i revovered my twrp.backup to stock and when i want to do your steps i see this problem.
Thanks for your help.
Click to expand...
Click to collapse
Yes,but you got back to stock using the update.app or your recovery ? If You did recovery try force updating stock using the dload folder and the update.app.
cosminvr27 said:
Yes,but you got back to stock using the update.app or your recovery ? If You did recovery try force updating stock using the dload folder and the update.app.
Click to expand...
Click to collapse
I said that i got back to stock with twrp restore,that i think it means recovery you said and now
im on kiw-l21 c185.
I dont get that, you mean that i put stock rom in dload forder then what? Use local update in updater? It will work?
d
najafi.ali.68 said:
I said that i got back to stock to stock with twrp restore,that ithink.it means
recovery you said and now im on kiw-l21 c185
I dont get that, you mean that i put stock rom in dload forder then what? Use local update in updater? It will work?
d
Click to expand...
Click to collapse
Yes.
Download this https://mega.nz/#!Q0YQmIQD!KSwQvGymMUf-YA4A5oDFBvg12UwQlPDm5dIOdTDsEjc
You should be seeing either an archive either the update.app file, wich is the stock b130 rom.
Now, copy the update.app on the sd card into a folder called dload ( If you don't see it, just create it ).
Power off the phone, then press at the same time volume +, volume - and power and it should install the stock b130 rom. Next just do the update to b140 through the updater and reinstall twrp and try again .
If while updating you encounter any errors , try reinstalling stock recovery first.
cosminvr27 said:
Yes.
Download this https://mega.nz/#!Q0YQmIQD!KSwQvGymMUf-YA4A5oDFBvg12UwQlPDm5dIOdTDsEjc
You should be seeing either an archive either the update.app file, wich is the stock b130 rom.
Now, copy the update.app on the sd card into a folder called dload ( If you don't see it, just create it ).
Power off the phone, then press at the same time volume +, volume - and power and it should install the stock b130 rom. Next just do the update to b140 through the updater and reinstall twrp and try again .
If while updating you encounter any errors , try reinstalling stock recovery first.
Click to expand...
Click to collapse
Ok when i got home i'll do.that and tell what happened.
Thank you so much

Honour 7 PLK-AL10 after upgrde of software to 6 data service is not working

i want to downgrade the software to 5.1.1 lollipop and EMUI to 3.1
please help me i have down load the software when i give the command to upgrade from SD card the instillation start and fail
ashishpupri said:
i want to downgrade the software to 5.1.1 lollipop and EMUI to 3.1
please help me i have down load the software when i give the command to upgrade from SD card the instillation start and fail
Click to expand...
Click to collapse
Are you on MM? Did you download the rollback package or just the stock firmware for your device?
You need a rollback package to go back to LP from MM.
If you are on Marshmallow you have to flash the rollback first. Otherwise follow below steps.
Try to update it manually, assuming you were rooted, follow these steps:
Download your phone's lollipop firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
NOTE: If the manual flashing doesn't works or you get any errors, then first try only the force update method, i.e Putting the UPDATE.APP from which you extracted the files in dload folder of your external SDCARD and pressing Vol UP + Vol DOWN + Power button simultaneously after switching off your phone.
Sent from my PLK-L01 using Tapatalk
ashishpupri said:
i want to downgrade the software to 5.1.1 lollipop and EMUI to 3.1
please help me i have down load the software when i give the command to upgrade from SD card the instillation start and fail
Click to expand...
Click to collapse
I suggest you to backup all your stuff with Huawei native backup app. Copy it to a safe place or let it be at the SD card.
If you have root, unroot H7 in SuperSU (full unroot).
If you have TWRP recovery flash (fastboot flash recovery recovery.img) recovery file from (extracted) current version ROM.
Copy transitional package to dload folder in H7, and force update (from off state, press vol+- and power untill it shows a screen)
Then you can flash B180 full ROM and update to B190.
Restore your backup and your done.
zinko_pt said:
I suggest you to backup all your stuff with Huawei native backup app. Copy it to a safe place or let it be at the SD card.
If you have root, unroot H7 in SuperSU (full unroot).
If you have TWRP recovery flash (fastboot flash recovery recovery.img) recovery file from (extracted) current version ROM.
Copy transitional package to dload folder in H7, and force update (from off state, press vol+- and power untill it shows a screen)
Then you can flash B180 full ROM and update to B190.
Restore your backup and your done.
Click to expand...
Click to collapse
The linked transitional package is for PLK-L01 (European version), while ashishpupri has PLK-AL10 (Chinese) and he needs another rollback file, like I do. But I haven't found any rollback package that works with B380 (or B395) builds.
---------- Post added at 11:10 AM ---------- Previous post was at 11:07 AM ----------
DigiGoon said:
If you are on Marshmallow you have to flash the rollback first. Otherwise follow below steps.
Try to update it manually, assuming you were rooted, follow these steps:
Download your phone's lollipop firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
NOTE: If the manual flashing doesn't works or you get any errors, then first try only the force update method, i.e Putting the UPDATE.APP from which you extracted the files in dload folder of your external SDCARD and pressing Vol UP + Vol DOWN + Power button simultaneously after switching off your phone.
Sent from my PLK-L01 using Tapatalk
Click to expand...
Click to collapse
Is it possible to simply "overwrite" the current system with fastboot flash? You know we don't have rollback package for PLK-AL10 but want to go back to lollipop.
tgergo said:
The linked transitional package is for PLK-L01 (European version), while ashishpupri has PLK-AL10 (Chinese) and he needs another rollback file, like I do. But I haven't found any rollback package that works with B380 (or B395) builds.
---------- Post added at 11:10 AM ---------- Previous post was at 11:07 AM ----------
Flash all other extracted files similarly firing these commands.
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
NOTE: If the manual flashing doesn't works or you get any errors, then first try only the force update method, i.e Putting the UPDATE.APP from which you extracted the files in dload folder of your external SDCARD and pressing Vol UP + Vol DOWN + Power button simultaneously after switching off your phone.
Sent from my PLK-L01 using Tapatalk
Is it possible to simply "overwrite" the current system with fastboot flash? You know we don't have rollback package for PLK-AL10 but want to go back to lollipop.
Click to expand...
Click to collapse
I had the same question... The answer is in the following thread
http://forum.xda-developers.com/honor-7/help/manually-downgrading-mm-to-lp-t3469774/page1
Sent from my PLK-L01 using XDA Labs
What about "debranding"? How could it work?
It was suggested to me here:
http://forum.xda-developers.com/hon...to-android-5-emui-3-1-plk-al10-t3460784/page2
tgergo said:
Is it possible to simply "overwrite" the current system with fastboot flash? You know we don't have rollback package for PLK-AL10 but want to go back to lollipop.
Click to expand...
Click to collapse
I don't think it'll work, as rollback has some other packages too which needs to be flashed unlike the common ones.
Sent from my PLK-L01 using Tapatalk
DigiGoon said:
I don't think it'll work, as rollback has some other packages too which needs to be flashed unlike the common ones.
Sent from my PLK-L01 using Tapatalk
Click to expand...
Click to collapse
It will work, I´ve done it for PLK-01. The problem is the partitions will be messed up and you get first a nice bootloop. Then it´s a matter of trial-and-error to fash img files from full LP releases to see which work. Once I spent a whole Saturday and Sunday doing flashings and praying for the best. I got lucky.
I honestly don't recommend, AT ALL, this way. It´s a nice attempt to get your device bricked.
zinko_pt said:
It will work, I´ve done it for PLK-01. The problem is the partitions will be messed up and you get first a nice bootloop. Then it´s a matter of trial-and-error to fash img files from full LP releases to see which work. Once I spent a whole Saturday and Sunday doing flashings and praying for the best. I got lucky.
I honestly don't recommend, AT ALL, this way. It´s a nice attempt to get your device bricked.
Click to expand...
Click to collapse
The first bootloop only states that it doesn't work in a pattern, so no one should try or do it.
tgergo said:
What about "debranding"? How could it work?
It was suggested to me here:
http://forum.xda-developers.com/hon...to-android-5-emui-3-1-plk-al10-t3460784/page2
Click to expand...
Click to collapse
Yep. That is a valid strategy. Debrand and rollback.
Sent from my PLK-L01 using XDA Labs
muradulislam said:
Yep. That is a valid strategy. Debrand and rollback.
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
Can you tell me how to do it? What are the steps? How does it work? Thanks.
tgergo said:
Can you tell me how to do it? What are the steps? How does it work? Thanks.
Click to expand...
Click to collapse
I am sorry buddy. Checked multi-tool options to write the post for you but I got this (you can see it under model names in the pic below)
"Change model possible only on version of Android 5.0"
And moreover I don't see honor 7 plus supported here in the tool as you can see in the image.
If you want to check it out for yourself, head to the thread
http://forum.xda-developers.com/honor-7/general/honor-7-multi-tool-t3281176/page1
and download multi-tool but it will unlock your bootloader, root your phone and in the end, you will not get what you want. (IMHO)
The only possible way I can think of is to contact Huawei customer service with your problem via email but most likely they will ask you to take your phone to a customer service center.
Sent from my PLK-L01 using XDA Labs
Try the Huawei firmware finder. You may find the complete and transitional packages if available.
http://forum.xda-developers.com/honor-7/general/huawei-firmware-finder-team-mt-t3469621
zinko_pt said:
Try the Huawei firmware finder. You may find the complete and transitional packages if available.
http://forum.xda-developers.com/honor-7/general/huawei-firmware-finder-team-mt-t3469621
Click to expand...
Click to collapse
Thank you. I found the version B396 and its change log says it can be rollbacked to emui 3.1. However it did not find (search for) rollback packages, hopefully it will work with the existing ones.
I unrooted my phone yesterday, installed B396 rom but none of the rollback packages work. Still "software install failed". Any more idea what could be done?
Who makes the rollback packages? They are only 18-19 kB.
What is the realistic size of a rollback file? What I found for PLK-AL10 are only 17-18kB (!), while on official honor site the rollback file made for the European (L01) version is 200-300 MB.
tgergo said:
What is the realistic size of a rollback file? What I found for PLK-AL10 are only 17-18kB (!), while on official honor site the rollback file made for the European (L01) version is 200-300 MB.
Click to expand...
Click to collapse
It should be anywhere from 100 to 300 MB. That is the size I usually observed.
But 18-19 KB is not possible coz it has to has multiple partitions inside it.
Sent from my PLK-L01 using XDA Labs
muradulislam said:
It should be anywhere from 100 to 300 MB. That is the size I usually observed.
But 18-19 KB is not possible coz it has to has multiple partitions inside it.
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
Hmmm... Then I don't understand why these files are so small...
DigiGoon said:
I don't think it'll work, as rollback has some other packages too which needs to be flashed unlike the common ones.
Sent from my PLK-L01 using Tapatalk
Click to expand...
Click to collapse
Hi friend,
The problem is still how to go back from Android 6 to 5 on PLK-AL10.
Another guy suggested me a simple solution: format (wipe) my phone and then any operating system can be flashed. Here is the way he did:
http://forum.xda-developers.com/showpost.php?p=69187959&postcount=13
Do you think it can work?
Thanks in advance.

[GUIDE] Use different region firmware without rebranding

Things Needed:
Unlocked Honor 7x : Go here
A PC
WinRAR
Firmware Finder
HuaweiUpdateExtractor_0.9.9.5
Note: I suggest you to read from here and see all guides from here to backup your phone completely before doing this
Downloads:
1. Firmware Finder : Website
2. HuaweiUpdateExtractor_0.9.9.5 : OP
Instruction:
1. Run Firmware finder and go to Common Base tab, enter bnd in Model for find and click Find
2. Click the link under Filelist of the latest FullOTA package (I used BND-AL10C00B182)
3. Download the first link (update.zip) and third link (update_full_BND-AL10_all_cn.zip) from the pop up and extract UPDATE.APP from them to different locations, using winrar. Now you have 2 UPDATE.APP files at different locations.
Again, Download the last link of latest OTA Package of your variant (update_BND-L22_hw_in.zip for india) (optional) (i used BND-AL10C675B140CUSTC675D002)
4. Run HuaweiUpdateExtractor_0.9.9.5 and select Honor 7x from drop down list. Now in Extract tab locate UPDATE.APP and right click any file and select extract all.
5. Repeat again for second UPDATE.APP file.
6.
a. Reboot to TWRP and copy system.img, product.img, vendor.img, version, cust.img to memory card
b. Tap install and tap image
c. Select system.img and choose system
d. Repeat for all images you copied in step 6. a
7. Wipe data and reboot to system
8. Once system boots up, reboot to TWRP
9. Copy your backed up product, version and cust images to memory card and flash using TWRP (see steps 6.a and 6.b)
10. Flash the the ota of your variant (update_BND-L22_hw_in.zip for india)
Reboot
For better understanding, watch the video
Join Telegram group if you are willing to test latest stuff.
reserved
reserved 2
Suppose for TL10 is the same process with your corresponding files, yes?
Enviado desde mi BND-TL10 mediante Tapatalk
valeriogerva said:
Suppose for TL10 is the same process with your corresponding files, yes?
Enviado desde mi BND-TL10 mediante Tapatalk
Click to expand...
Click to collapse
Process will be same but files will not
Sent from my BND-AL10 using Tapatalk
Dumb question: I can't install the latest BND-AL10 on my BND-L21 phone right? There are some hardware restrictions, or something like that?
Because I swiped my OS accidently three weeks ago, and I don't have other phone so... If I can have basic functions of the Honor 7X waiting for the official BND-L21 STOCK ROM, it's ok for me.
Thanks a lot, sorry for this stupid question...
k0pernicus said:
Dumb question: I can't install the latest BND-AL10 on my BND-L21 phone right? There are some hardware restrictions, or something like that?
Because I swiped my OS accidently three weeks ago, and I don't have other phone so... If I can have basic functions of the Honor 7X waiting for the official BND-L21 STOCK ROM, it's ok for me.
Thanks a lot, sorry for this stupid question...
Click to expand...
Click to collapse
It'll work just fine if you just wiped system
Make backup of other Partitions and follow the guide same way
Sent from my BND-AL10 using Tapatalk
Why does the Firmware Finder not show the BND-L24C567B130 update?
I installed this OTA update on my new L24, but didn't think to capture the update.zip at the time.
Sudeep Duhoon said:
Things Needed:
Join Telegram group if you are willing to test latest stuff.
Click to expand...
Click to collapse
I tried this guide but could not succeed in manual update! Device doesn't boot at all. Am i missing some crucial step.
It worked perfectly.
SVR said:
I tried this guide but could not succeed in manual update! Device doesn't boot at all. Am i missing some crucial step.
It worked perfectly.
Click to expand...
Click to collapse
You meant this sleek? How to get Indian AL10 worth Google play? The
Clarification ---
I had an Honor 7x BND-L24 but because I could not find stock firmware I returned it as I was afraid to root it without being able to restore to factory reset version.
So if I understand from your post, I can use another firmware set and it will work just fine by following your steps?
1. What firmware do you suggest we use?
2. In one of your posts you mentioned - "Make backup of other Partitions and follow the guide same way" - How is this accomplished?
If I can find a way to root this phone and then factory reset it, I would buy it again.

[stock rom latest version instalition guide] Honor 8 LRD-F09

Hello all you confused people!
I was at the same situation myself without having a backup after i bricked my honor 8.
I looked everywhere but i couldn't seem to find the latest firmware with a simple and easy instalition guide.
Basically all you have to do is flash the old rom version and then update your phone through HiSuite.
Things you are going to need:
A SDCard
Your device
The firmware of your region which you are going to get through the post i will link. Thanks a lot @DigiGoon
And last your pc with hisuite installed.
1)So download the firmware according to your device.
2)unzip it and you will have a folder named "dload"
3)take the folder with its contents and paste it to your SDCard
4)place the sdcard to your phone
5)Power your phone off if it isn't powered of already
6)press the volume up and down button and then press the power button(all at the same time!!!)
7)the phone will install the update package(firmware)by itself.after that its going to reboot
8)Then connect your phone with the computer and press update on Hisuite.it will download and install a full update.
9)after that update from the phones ota and you succesfully have your device like brand new out of the box.
if this helped you in any way press thanks if you are kind enough
thanks to @DigiGoon again for providing the firmware,feel free to ask me anything in the comments.
GerasxD said:
Hello all you confused people!
I was at the same situation myself without having a backup after i bricked my honor 8.
I looked everywhere but i couldn't seem to find the latest firmware with a simple and easy instalition guide.
Basically all you have to do is flash the old rom version and then update your phone through HiSuite.
Things you are going to need:
A SDCard
Your device
The firmware of your region which you are going to get through the post i will link. Thanks a lot @DigiGoon
And last your pc with hisuite installed.
1)So download the firmware according to your device.
2)unzip it and you will have a folder named "dload"
3)take the folder with its contents and paste it to your SDCard
4)place the sdcard to your phone
5)Power your phone off if it isn't powered of already
6)press the volume up and down button and then press the power button(all at the same time!!!)
7)the phone will install the update package(firmware)by itself.after that its going to reboot
8)Then connect your phone with the computer and press update on Hisuite.it will download and install a full update.
9)after that update from the phones ota and you succesfully have your device like brand new out of the box.
if this helped you in any way press thanks if you are kind enough
thanks to @DigiGoon again for providing the firmware,feel free to ask me anything in the comments.
Click to expand...
Click to collapse
Will this work on an unlocked bootloader?
h4cker90 said:
Will this work on an unlocked bootloader?
Click to expand...
Click to collapse
Yes, installation via dload method will work with locked bl and will likely relock your bootloader. And it's better to make a factory reset through recovery after installation and boot it up once before you update in next step.
About update via HiSuite, idk if this needs a locked BL.
Sent from my FRD-L09 using XDA Labs
Can I use this to update to EMUI 8 on FRD L04?
Blackherted said:
Can I use this to update to EMUI 8 on FRD L04?
Click to expand...
Click to collapse
yes you can do it in any firmware you are currently.
can i use this methode when i have a coustom recovery and an open bootloader?
I have android 6.0 and i want to install Oreo and later on rros.
Or is there a easier version to install oreo? Because my phone isnt bricked.
Palindrom87 said:
can i use this methode when i have a coustom recovery and an open bootloader?
I have android 6.0 and i want to install Oreo and later on rros.
Or is there a easier version to install oreo? Because my phone isnt bricked.
Click to expand...
Click to collapse
You'd be able to update to nougat, go to B412, update to Oreo via HiSuite and than flash RROS. All these passages surely will delete all your datas and lock your device back.
Hello there,
Thanks for the guide but where is the link to the firmwares?
I'm on the latest Oreo with unlocked bootloader and I wish to do that to relock my bootloader...
I tried this guide but doesnt work for me.. Once i reboot with three finger, after reach 5% recovery say me update failed
Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk
Please help
Thanks help, my honor 8 frd-l09 broke down, constantly lost signal from network operator, so I bought on eBay a board supposedly would be the same but the seller lied, the board had Chinese firmware, after searching here on the site I followed a tutorial to rebrand from frd-al00 to frd-l09, everything was perfect, until updates started to arrive on the phone and I accepted, the third update occurred an error and the phone no longer started, to make it worse i tried to install another rom Now I have a brick.

Categories

Resources