Hi I have a few questions
I'm on B32 roted Whit magisk ...
I want to sell my phone and want to put it back to stock
Already downloaded b32 from ZTE ...
Do I just uninstall magisk and flash stock recovery ? Right after that let the phone boot and lock the boatloader ? If I'm missing a step help it's always appreciate
luisaet82 said:
Hi I have a few questions
I'm on B32 roted Whit magisk ...
I want to sell my phone and want to put it back to stock
Already downloaded b32 from ZTE ...
Do I just uninstall magisk and flash stock recovery ? Right after that let the phone boot and lock the boatloader ? If I'm missing a step help it's always appreciate
Click to expand...
Click to collapse
Flash stock recovery, then flash the B32 that you downloaded from ZTE and also do a factory reset. After that I think you can lock.
P.S where did you get the stock recovery from?
Choose an username... said:
Flash stock recovery, then flash the B32 that you downloaded from ZTE and also do a factory reset. After that I think you can lock.
P.S where did you get the stock recovery from?
Click to expand...
Click to collapse
I extract the factory IMG from the b32 I downloaded from ZTE I'm I doing it wrong ?
luisaet82 said:
I extract the factory IMG from the b32 I downloaded from ZTE I'm I doing it wrong ?
Click to expand...
Click to collapse
Nah it's okay.
Just install B32 from the stock recovery.
relock /unlock the boatloader,it just work on mm.....mybe.you can try
kurey said:
relock /unlock the boatloader,it just work on mm.....mybe.you can try
Click to expand...
Click to collapse
that would brick the phone unless it was completely stock...
Related
A2017g with unlocked bootloader, stock b10 and stock b10 recovery. When booting to recovery I select bootloader but it's just restarts the phone.
Any suggestions?
It Wont
ItsNewDroid said:
A2017g with unlocked bootloader, stock b10 and stock b10 recovery. When booting to recovery I select bootloader but it's just restarts the phone.
Any suggestions?
Click to expand...
Click to collapse
Axon 7 doesnot boot to bootloader in Noughat
satish.yarramsetti said:
Axon 7 doesnot boot to bootloader in Noughat
Click to expand...
Click to collapse
B10 is marshmallow
ItsNewDroid said:
B10 is marshmallow
Click to expand...
Click to collapse
Installed also b03 including b03 recovery. Still no bootloader
I am sorry
ItsNewDroid said:
B10 is marshmallow
Click to expand...
Click to collapse
ItsNewDroid said:
Installed also b03 including b03 recovery. Still no bootloader
Click to expand...
Click to collapse
Why do you want to get to fastboot? If you really need to, install TWRP, unlock the bootloader, and use the ZIP that storming made (somewhere on Reinstall TWRP and Root after update to Nougat).
That's the way to get fastboot.
Choose an username... said:
Why do you want to get to fastboot? If you really need to, install TWRP, unlock the bootloader, and use the ZIP that storming made (somewhere on Reinstall TWRP and Root after update to Nougat).
That's the way to get fastboot.
Click to expand...
Click to collapse
I want fast boot on stock so I can lock the bootloader
Hi there...anybody could provide stock recovery?
I did a debranding from cust C02 to c432 but can´t install OTA...it´s downloading without any problems..but reboot is running immediately in TWRP..
Could anybody help me?
Have the same problem.
Downloads then reboots into TWRP and nothing happens.
Any ideas?
https://forum.xda-developers.com/mate-9/how-to/guide-rebrand-chinese-al00-mate9-to-t3554656/page59
M.KK said:
https://forum.xda-developers.com/mate-9/how-to/guide-rebrand-chinese-al00-mate9-to-t3554656/page59
Click to expand...
Click to collapse
Thx a lot.. I did the rebrand with this method... Without any error notification... Phone boots normally... Then it says there's an update... I can download without any problems.. And the next reboot to install update comes immediately into twrp
Hey,
You need the stock recovery.
I can upload the img file tomorrow, when I'm at home.
Or you download and unpack it on your own like explained here.
Hey,
I uploaded stock recovery here.
Just flash in fastboot mode and try ota again.
Should work now. But it could relock bootloader if it does the full ota and not just the update..
Ri_Ka said:
Hey,
I uploaded stock recovery here.
Just flash in fastboot mode and try ota again.
Should work now. But it could relock bootloader if it does the full ota and not just the update..
Click to expand...
Click to collapse
THX A LOT!!!!
U saved my day!!!!!!
relock is no problem... because I m not really sure if I need it open..can´t decide if root or not at the moment because
it´s not perfectly clear to me what r the benefits...except being able to install adaway.apk to get rid of the annoying advertisings
Ri_Ka said:
Hey,
I uploaded stock recovery here.
Just flash in fastboot mode and try ota again.
Should work now. But it could relock bootloader if it does the full ota and not just the update..
Click to expand...
Click to collapse
Will it work for P10?
juntulis said:
Will it work for P10?
Click to expand...
Click to collapse
Hey,
I think it should work, just give it a try.
Nothing to loose, if it doesn't, just reflash twrp again.
Hey Guys,
im going to switch my black G6 to a platimum one - so i have to relock the bootloader. I know how to do this, but first i have to get rid of twrp .
Can one of you tell me, how to performe a completet factory reset, so i can relock my bootloader?
thx in advance!
fonsi78 said:
Hey Guys,
im going to switch my black G6 to a platimum one - so i have to relock the bootloader. I know how to do this, but first i have to get rid of twrp .
Can one of you tell me, how to performe a completet factory reset, so i can relock my bootloader?
thx in advance!
Click to expand...
Click to collapse
Flash original recovery and firmware then send the lock command via ADB to lock bootloader
basicreece said:
Flash original recovery and firmware then send the lock command via ADB to lock bootloader
Click to expand...
Click to collapse
thank you, but how do i get the original recovery file? i didnt find it.
with my pixel and oneplus 3t i was able to flash stock rom and this reseted recovery, too.
I already flashed the actual stock rom with twrp (https://forum.xda-developers.com/lg-g6/development/rom-eu-lg-h870-10n-rom-t3637828), but this zip was made to keep twrp. Now i´m wondering how to flash a full stock rom, inkl. recovery or just flash recovery....
basicreece said:
Flash original recovery and firmware then send the lock command via ADB to lock bootloader
Click to expand...
Click to collapse
Realy adb relock bottloader work thats it? just easy?
On G4 not working...
If realy working very good news me thanks anyone confirm this!
Hey guys,
i still didn´t get it to work. Any Tipps for a LG Noob, how to get back to stock recovery?
plz give me a hint or throw a link in at me, If i´m missing something obvious :silly:
Can't you just install the official LG suite software on a desktop or laptop and then use that? It will probably detect the missing or "damaged" recovery and then automatically "repair".
https://www.androidfilehost.com/?fid=817550096634787189 thats the original recovery.img from 10n kdz flasht it with twrp oder flashfire app and twrp is gone
westwood24 said:
https://www.androidfilehost.com/?fid=817550096634787189 thats the original recovery.img from 10n kdz flasht it with twrp oder flashfire app and twrp is gone
Click to expand...
Click to collapse
Thank you..i will give it a try tonight.
westwood24 said:
https://www.androidfilehost.com/?fid=817550096634787189 thats the original recovery.img from 10n kdz flasht it with twrp oder flashfire app and twrp is gone
Click to expand...
Click to collapse
Thank you. This did the Job.
Now I'm on stock rom with stock recovery, but the "fastboot oem lock" leads to a "corrupt device" that will not boot anymore. Can't the H870 (europe) be relocked, once it was unlocked via unlock.bin?
Isn't that the exact same procedure but then simply choosing "lock"?
ASW1 said:
Isn't that the exact same procedure but then simply choosing "lock"?
Click to expand...
Click to collapse
i thought it was, but as a mentioned, it leads to a startscreen, that says: your device is corrupt and will not boot. after flashing the unlock bin it boots again
fonsi78 said:
i thought it was, but as a mentioned, it leads to a startscreen, that says: your device is corrupt and will not boot. after flashing the unlock bin it boots again
Click to expand...
Click to collapse
Is there a "lock.bin" file that can be fetched from the LG site maybe?
From the LG developer site:
4. Once unlocked, it cannot be undone.
There is no turning back once you have unlocked the bootloader. You will not be able to revert your phone to locked status.
Click to expand...
Click to collapse
Didn't you read this information before unlock the bootloader???
Montechristo said:
From the LG developer site:
Didn't you read this information before unlock the bootloader???
Click to expand...
Click to collapse
i read it..:angel:
but i also read here @xda that you can relock it, if you restore to stock rom, via kdz & LG Up an then fastboot oem lock...and it worked, finally.
Thx to everyone for your help..i really, really appreciate it!
fonsi78 said:
i read it..:angel:
but i also read here @xda that you can relock it, if you restore to stock rom, via kdz & LG Up an then fastboot oem lock...and it worked, finally.
Thx to everyone for your help..i really, really appreciate it!
Click to expand...
Click to collapse
I'm interested in buying a LG G6. Can you please explain a little bit more what you did to re-lock? Where did you get the kdz image (which region) and what steps did you do? I'm completely new to LG devices.
Question: If I install a full stock zip, does it overwrite:
Boot stack? <- Yes if from stock recovery / ? if from TWRP
Fastboot? <- Yes if from stock recovery / No if from TWRP
Recovery? <- Yes if from stock recovery / Yes if from TWRP
I've flashed a full stock zip and fastboot. just want to make sure I don't need to also flash stock bootstack for RMA purposes.
witchcraftz said:
Question: If I install a full stock zip, does it overwrite:
Boot stack? <- ?
Fastboot? <- No
Recovery? <- Yes
I've flashed a full stock zip and fastboot. just want to make sure I don't need to also flash stock bootstack for RMA purposes.
Click to expand...
Click to collapse
If you want to RMA your phone, flash an official zip through the official recovery. Those overwrite the bootstack, the recovery and the bootloader. Or use MiFlash. But I wouldn't risk locking the bootloader with not everything fully stock...
After flashing the official zip use axon7toolkit to relock.
I followed this process and I locked my phone.
https://forum.xda-developers.com/showpost.php?p=73576556&postcount=47
I'll download the latest Official Zip form ZTE and flash it officially just to make sure.
https://www.zteusa.com/axon-7#support
Thanks
I have been able to download OTAs and update this way.
But when I try to flash a Stock update.zip either from SD card or internal storage it gives me an error about not being able to mount the SD card.
Will the OTA updates also overwrite to boot stack?
Choose an username... said:
If you want to RMA your phone, flash an official zip through the official recovery. Those overwrite the bootstack, the recovery and the bootloader.
Click to expand...
Click to collapse
The phone downloaded the OTA for B19 and was able to run the update. How does ZTE check for a phone having been modified? Are there some steps or commands that can be run to check before sending it in? Should I just reflash the B19 full stock from Miflash to be sure everything is back to stock?
witchcraftz said:
The phone downloaded the OTA for B19 and was able to run the update. How does ZTE check for a phone having been modified? Are there some steps or commands that can be run to check before sending it in? Should I just reflash the B19 full stock from Miflash to be sure everything is back to stock?
Click to expand...
Click to collapse
We don't really know if they check it at all. Someone said he sent it unlocked and they disn't even notice.
Just be sure that the 5 second screen doesn't show up when you turn it on. Should be enough
Choose an username... said:
We don't really know if they check it at all. Someone said he sent it unlocked and they disn't even notice.
Just be sure that the 5 second screen doesn't show up when you turn it on. Should be enough
Click to expand...
Click to collapse
Update: My device was accepted by RMA and I have just received a replacement. Success!
Hi to everyone, I have a doubt on what to do.
I installed a Custom Rom in my Huawei P10 Lite, but I want to go back to stock, and I know that before flashing the stock rom, I have to install the stock recovery and then use the dload method to revert to stock, my doubt is, which Stock recovery should I use?
Thanks in advance!
blackfag said:
Hi to everyone, I have a doubt on what to do.
I installed a Custom Rom in my Huawei P10 Lite, but I want to go back to stock, and I know that before flashing the stock rom, I have to install the stock recovery and then use the dload method to revert to stock, my doubt is, which Stock recovery should I use?
Thanks in advance!
Click to expand...
Click to collapse
You don't need stock recovery for dload method.
nemanjsb said:
You don't need stock recovery for dload method.
Click to expand...
Click to collapse
Meaning can use twrp custom recovery and flash the stock rom ?just the raw stock rom zip file without any converting ?
nainaabd said:
Meaning can use twrp custom recovery and flash the stock rom ?just the raw stock rom zip file without any converting ?
Click to expand...
Click to collapse
With HwOta8 or dload (dload will lock bootloader) u need just files for stock roms and nothing else.
nemanjsb said:
You don't need stock recovery for dload method.
Click to expand...
Click to collapse
Thank you, I made it! Unfortunately, I found out I can use only service roms with dload method, other roms gave me error, but going back to stock was the only thing I wanted, thank you again for your help!
blackfag said:
Thank you, I made it! Unfortunately, I found out I can use only service roms with dload method, other roms gave me error, but going back to stock was the only thing I wanted, thank you again for your help!
Click to expand...
Click to collapse
can you share how did you revert to stock .U dont need to install stock recovery ?just flash stock rom using twrp ?
nainaabd said:
can you share how did you revert to stock .U dont need to install stock recovery ?just flash stock rom using twrp ?
Click to expand...
Click to collapse
U can't flash stock rom with twrp. Which rom you have now?
nemanjsb said:
U can't flash stock rom with twrp. Which rom you have now?
Click to expand...
Click to collapse
WAS-LX2C636B368 (8.0.0.368) Malaysia(Asia pacific)
rooted + magisk
nainaabd said:
WAS-LX2C636B368 (8.0.0.368) Malaysia(Asia pacific)
rooted + magisk
Click to expand...
Click to collapse
It's not stock rom?
nemanjsb said:
It's not stock rom?
Click to expand...
Click to collapse
i want to revert back to 100% stock with out any modification (back to factory default) existing stock already
unlock /rooted /custom recovery /many mods on system apps too.
How do i return to factory default?
nainaabd said:
i want to revert back to 100% stock with out any modification (back to factory default) existing stock already
unlock /rooted /custom recovery /many mods on system apps too.
How do i return to factory default?
Click to expand...
Click to collapse
Dload or HwOta.
Dload will format all partition and lock your bootloader and u need sd card.
HwOta will just install stock rom and after it do not boot rom(you don't need sd card). You need to do factory reset from stock recovery.
nainaabd said:
can you share how did you revert to stock .U dont need to install stock recovery ?just flash stock rom using twrp ?
Click to expand...
Click to collapse
I just downloaded a Service Rom from another XDA post for Huawei P10 Lite, copied all those files in a folder called "dload" and then, after turning off the device, used the "three buttons method" (you have to press volume up, volume down and power button to use the dload method) and it fully reverted to stock.
Just to warn you, I'm missing too much things and I don't know how to fix that, I'm just happy that my phone reverted to stock.