Hi there...anybody could provide stock recovery?
I did a debranding from cust C02 to c432 but can´t install OTA...it´s downloading without any problems..but reboot is running immediately in TWRP..
Could anybody help me?
Have the same problem.
Downloads then reboots into TWRP and nothing happens.
Any ideas?
https://forum.xda-developers.com/mate-9/how-to/guide-rebrand-chinese-al00-mate9-to-t3554656/page59
M.KK said:
https://forum.xda-developers.com/mate-9/how-to/guide-rebrand-chinese-al00-mate9-to-t3554656/page59
Click to expand...
Click to collapse
Thx a lot.. I did the rebrand with this method... Without any error notification... Phone boots normally... Then it says there's an update... I can download without any problems.. And the next reboot to install update comes immediately into twrp
Hey,
You need the stock recovery.
I can upload the img file tomorrow, when I'm at home.
Or you download and unpack it on your own like explained here.
Hey,
I uploaded stock recovery here.
Just flash in fastboot mode and try ota again.
Should work now. But it could relock bootloader if it does the full ota and not just the update..
Ri_Ka said:
Hey,
I uploaded stock recovery here.
Just flash in fastboot mode and try ota again.
Should work now. But it could relock bootloader if it does the full ota and not just the update..
Click to expand...
Click to collapse
THX A LOT!!!!
U saved my day!!!!!!
relock is no problem... because I m not really sure if I need it open..can´t decide if root or not at the moment because
it´s not perfectly clear to me what r the benefits...except being able to install adaway.apk to get rid of the annoying advertisings
Ri_Ka said:
Hey,
I uploaded stock recovery here.
Just flash in fastboot mode and try ota again.
Should work now. But it could relock bootloader if it does the full ota and not just the update..
Click to expand...
Click to collapse
Will it work for P10?
juntulis said:
Will it work for P10?
Click to expand...
Click to collapse
Hey,
I think it should work, just give it a try.
Nothing to loose, if it doesn't, just reflash twrp again.
Related
After attempt at installing software update to Nexus 10 tablet will not boot. Have wiped Cache and even then did a factory reset. Nothing. Google appears and then twirling colorful dots and nothing. For hours just twirling dots., Samsung and Google and Best Buy geeks says nothing they can do. No longer under warranty but very upset since tablet was working great until update. I am not very tech savvy but can anyone help or do I just have a new paperweight? Thanks for any advice.
I have not made any modifications to the tablet.
Just flash the newest factory image. Get it and the instructions to flash it from here:
https://developers.google.com/android/nexus/images
yes flash the newest image
After getting a notification of the latest update I went and rebooted for the update to install but it went to the twrp recovery and nothing happens, is there a way to install the update?
VivaErBetis said:
Just flash the newest factory image. Get it and the instructions to flash it from here:
https://developers.google.com/android/nexus/images
Click to expand...
Click to collapse
Gibbothegreat said:
After getting a notification of the latest update I went and rebooted for the update to install but it went to the twrp recovery and nothing happens, is there a way to install the update?
Click to expand...
Click to collapse
Still having proble? what is your recovery ? stock? did you update the bootloader? depending on your answer I should be able to help you out, thx
Khaon said:
Still having proble? what is your recovery ? stock? did you update the bootloader? depending on your answer I should be able to help you out, thx
Click to expand...
Click to collapse
Hi Khaon, I have stock lollipop version 5.1.1 . (LMY47V) and latest twrp version. When upgrading it restarts and goes to recoverys main screen.
BTW how can I check which version my bootloader is?
same problem
VivaErBetis said:
Just flash the newest factory image. Get it and the instructions to flash it from here:
as a newbie .I'm not allowed to reference your link !!
I rooted my nexus 10 using xda instructions., installed CWM. All good. I tried backup and recovery and screwed something up in recovery. Got stuck in recovery mode reboot loop. Many gyrations, no fix, so I tried factory reset. Still no fix.
I decided to install a new version of the OS using the Mantaray tar you reference above. UBS connecting and fastboot. All messages look good. Now I have the problem reported in this thread. Stuck with flying balls and no boot. Very interested in any suggestions you may have.
Click to expand...
Click to collapse
Gibbothegreat said:
Hi Khaon, I have stock lollipop version 5.1.1 . (LMY47V) and latest twrp version. When upgrading it restarts and goes to recoverys main screen.
BTW how can I check which version my bootloader is?
Click to expand...
Click to collapse
So you keep just boot looping into twrp, right ?
Did you try installing a custom ROM through adb or just connecting your device?
If it keeps boot looping you gotta to wipe the full storage.
Khaon said:
So you keep just boot looping into twrp, right ?
Did you try installing a custom ROM through adb or just connecting your device?
If it keeps boot looping you gotta to wipe the full storage.
Click to expand...
Click to collapse
No, on a normal reboot or a shutdown/restart it's fine no problems there but when I try to install the update via system update it reboots into twrp. I attach a pic of my system.
Gibbothegreat said:
No, on a normal reboot or a shutdown/restart it's fine no problems there but when I try to install the update via system update it reboots into twrp. I attach a pic of my system.
Click to expand...
Click to collapse
Oh I see, well, you should just flash a custom ROM or if you want to stay with official factory images, you should just follow instruction there:
https://developers.google.com/android/nexus/images
What you do need is just have fastboot executable once you are into the bootloader.
You can easily access the bootloader from twrp : shutdown > reboot into booatloader
Cool thx for your continued help :good:
The problem is due to your attempting an OTA update with a custom recovery (TWRP). You can only do OTA with stock recovery. Once you are in this situation, your easiest way out of it is to simply apply the latest factory image using "fastboot", but this will also wipe your user data so backup any photos, music, etc. before you start. You will also have to reload programs from Playstore once the new image is installed.
Hey Guys,
im going to switch my black G6 to a platimum one - so i have to relock the bootloader. I know how to do this, but first i have to get rid of twrp .
Can one of you tell me, how to performe a completet factory reset, so i can relock my bootloader?
thx in advance!
fonsi78 said:
Hey Guys,
im going to switch my black G6 to a platimum one - so i have to relock the bootloader. I know how to do this, but first i have to get rid of twrp .
Can one of you tell me, how to performe a completet factory reset, so i can relock my bootloader?
thx in advance!
Click to expand...
Click to collapse
Flash original recovery and firmware then send the lock command via ADB to lock bootloader
basicreece said:
Flash original recovery and firmware then send the lock command via ADB to lock bootloader
Click to expand...
Click to collapse
thank you, but how do i get the original recovery file? i didnt find it.
with my pixel and oneplus 3t i was able to flash stock rom and this reseted recovery, too.
I already flashed the actual stock rom with twrp (https://forum.xda-developers.com/lg-g6/development/rom-eu-lg-h870-10n-rom-t3637828), but this zip was made to keep twrp. Now i´m wondering how to flash a full stock rom, inkl. recovery or just flash recovery....
basicreece said:
Flash original recovery and firmware then send the lock command via ADB to lock bootloader
Click to expand...
Click to collapse
Realy adb relock bottloader work thats it? just easy?
On G4 not working...
If realy working very good news me thanks anyone confirm this!
Hey guys,
i still didn´t get it to work. Any Tipps for a LG Noob, how to get back to stock recovery?
plz give me a hint or throw a link in at me, If i´m missing something obvious :silly:
Can't you just install the official LG suite software on a desktop or laptop and then use that? It will probably detect the missing or "damaged" recovery and then automatically "repair".
https://www.androidfilehost.com/?fid=817550096634787189 thats the original recovery.img from 10n kdz flasht it with twrp oder flashfire app and twrp is gone
westwood24 said:
https://www.androidfilehost.com/?fid=817550096634787189 thats the original recovery.img from 10n kdz flasht it with twrp oder flashfire app and twrp is gone
Click to expand...
Click to collapse
Thank you..i will give it a try tonight.
westwood24 said:
https://www.androidfilehost.com/?fid=817550096634787189 thats the original recovery.img from 10n kdz flasht it with twrp oder flashfire app and twrp is gone
Click to expand...
Click to collapse
Thank you. This did the Job.
Now I'm on stock rom with stock recovery, but the "fastboot oem lock" leads to a "corrupt device" that will not boot anymore. Can't the H870 (europe) be relocked, once it was unlocked via unlock.bin?
Isn't that the exact same procedure but then simply choosing "lock"?
ASW1 said:
Isn't that the exact same procedure but then simply choosing "lock"?
Click to expand...
Click to collapse
i thought it was, but as a mentioned, it leads to a startscreen, that says: your device is corrupt and will not boot. after flashing the unlock bin it boots again
fonsi78 said:
i thought it was, but as a mentioned, it leads to a startscreen, that says: your device is corrupt and will not boot. after flashing the unlock bin it boots again
Click to expand...
Click to collapse
Is there a "lock.bin" file that can be fetched from the LG site maybe?
From the LG developer site:
4. Once unlocked, it cannot be undone.
There is no turning back once you have unlocked the bootloader. You will not be able to revert your phone to locked status.
Click to expand...
Click to collapse
Didn't you read this information before unlock the bootloader???
Montechristo said:
From the LG developer site:
Didn't you read this information before unlock the bootloader???
Click to expand...
Click to collapse
i read it..:angel:
but i also read here @xda that you can relock it, if you restore to stock rom, via kdz & LG Up an then fastboot oem lock...and it worked, finally.
Thx to everyone for your help..i really, really appreciate it!
fonsi78 said:
i read it..:angel:
but i also read here @xda that you can relock it, if you restore to stock rom, via kdz & LG Up an then fastboot oem lock...and it worked, finally.
Thx to everyone for your help..i really, really appreciate it!
Click to expand...
Click to collapse
I'm interested in buying a LG G6. Can you please explain a little bit more what you did to re-lock? Where did you get the kdz image (which region) and what steps did you do? I'm completely new to LG devices.
Hello,
today i wanted to update my *rooted* WAS-LX1 to B182, so i downloaded the update.zip and tried to flash it with FlashFire.
Then my phone booted in Error Mode. So i tried to boot in Fastboot mode, and it worked. So i flashed TWRP and now i want to install Stock firmware again, but i don't know which file i should flash. I've got 3 files called update.zip, update_data_full_public.zip and update_full_WASL21A_hw_eu.zip.
I hope you can help me.
Zillinda
Zillinda said:
Hello,
today i wanted to update my *rooted* WAS-LX1 to B182, so i downloaded the update.zip and tried to flash it with FlashFire.
Then my phone booted in Error Mode. So i tried to boot in Fastboot mode, and it worked. So i flashed TWRP and now i want to install Stock firmware again, but i don't know which file i should flash. I've got 3 files called update.zip, update_data_full_public.zip and update_full_WASL21A_hw_eu.zip.
I hope you can help me.
Zillinda
Click to expand...
Click to collapse
To update my rooted phone to B182 I had to download the full package (2.3gb, including update.zip and update_full_WASL21A_hw_eu.zip). I was not successfull in updating via TWRP. I updated via the official system menu so I don't know how exactly it was applied. According to other guides (http://www.stechguide.com/tag/was-lx1c432b182/ for example) it should be update.zip first and update_full_WASL21A_hw_eu.zip second, without a reboot. Let us know how it worked out...
garris_bibop said:
To update my rooted phone to B182 I had to download the full package (2.3gb, including update.zip and update_full_WASL21A_hw_eu.zip). I was not successfull in updating via TWRP. I updated via the official system menu so I don't know how exactly it was applied. According to other guides (http://www.stechguide.com/tag/was-lx1c432b182/ for example) it should be update.zip first and update_full_WASL21A_hw_eu.zip second, without a reboot. Let us know how it worked out...
Click to expand...
Click to collapse
Unfortunately it didn't work. The only thing i can do is boot in the TWRP recovery. Is there a way to flash the stock rom with fastboot?
Zillinda said:
Unfortunately it didn't work. The only thing i can do is boot in the TWRP recovery. Is there a way to flash the stock rom with fastboot?
Click to expand...
Click to collapse
I only tried flashing the update via sideload and recovery and it didn't work (http://rootmygalaxy.net/flash-ota-firmware-updates-using-adb-fastboot-commands/). Maybe you are lucky. Problem is, I'm quite new to this stuff, hopefully someone else can help out.
Can someone please provide us with a link for the stock recovery?
kazzot17 said:
Can someone please provide us with a link for the stock recovery?
Click to expand...
Click to collapse
https://mega.nz/#!V3AwUI6K!mcqlNCwcyE71MroUZuP9w-bNDhgt3MGzz0svgHUY8Ow
By the way, i solved the problem. I downloaded HuaweiUpdateExtractor for extracting the .img files from the update.app and i flashed them with fastboot.
Nice, congrats
Hi, everyone!
Today i recived a system update, I press quick update but then twrp starts and when I reboot, a notification says "system update failed" (or somthing like this), how can I update?
topongo said:
Hi, everyone!
Today i recived a system update, I press quick update but then twrp starts and when I reboot, a notification says "system update failed" (or somthing like this), how can I update?
Click to expand...
Click to collapse
otas doesn't work with custom recovery installed, yes or yes you need sotck recovery, maybe you try with firmware finder.
Here is the stock recovery. Flash this, then U will be able to update. After that U can re-flash TWRP
https://drive.google.com/open?id=0B38rwPwR6EtKdDdDQTNrbW81Mk0
thank you very much, I will do this tomorrow
topongo said:
thank you very much, I will do this tomorrow
Click to expand...
Click to collapse
Better flash TWRP to erecovery, always)
topongo said:
thank you very much, I will do this tomorrow
Click to expand...
Click to collapse
Did it work for you?
Belgas14 said:
Did it work for you?
Click to expand...
Click to collapse
sorry, I was inactive for a while. Yes, it worked, I flashed with success and updated but when I tried to reflash twrp the terminal say "flash failed" "permission denied" or something. I tried to relock and unlock bootloader but nothing...
Hi everyone, recently I downloaded the latest update from huawei system updater and then I wanted to flash it with flashfire but when it restarts it says "check_write_data_to_partition,write data error" and "update_huawei_pkg_from_ota_zip: update package from zip failed" then it reboot normaly without system changes, what can I do?
edit:
in the head of the log it says olso:
"mountencrypt: failed to mount /data: success"
It's pretty ambiguous...
topongo said:
Hi everyone, recently I downloaded the latest update from huawei system updater and then I wanted to flash it with flashfire but when it restarts it says "check_write_data_to_partition,write data error" and "update_huawei_pkg_from_ota_zip: update package from zip failed" then it reboot normaly without system changes, what can I do?
edit:
in the head of the log it says olso:
"mountencrypt: failed to mount /data: success"
It's pretty ambiguous...
Click to expand...
Click to collapse
Unlocked bootloader, custom recovery?
nemanjsb said:
Unlocked bootloader, custom recovery?
Click to expand...
Click to collapse
yeah TWRP
topongo said:
yeah TWRP
Click to expand...
Click to collapse
With twrp u can't install update u need stock recovery. Try to boot in erecovery and press download last recovery and then reboot in recovery.
nemanjsb said:
With twrp u can't install update u need stock recovery. Try to boot in erecovery and press download last recovery and then reboot in recovery.
Click to expand...
Click to collapse
I'm trying to install update through flashfire and not twrp or system recovery
Armin.K said:
Here is the stock recovery. Flash this, then U will be able to update. After that U can re-flash TWRP
https://drive.google.com/open?id=0B38rwPwR6EtKdDdDQTNrbW81Mk0
Click to expand...
Click to collapse
Can we use twrp to flash the stock recovery or must your pc with ADB ?
nainaabd said:
Can we use twrp to flash the stock recovery or must your pc with ADB ?
Click to expand...
Click to collapse
I used my pc with "fastboot".
I don't think is possible to flash stock recovery from a custom recovery
topongo said:
I used my pc with "fastboot".
I don't think is possible to flash stock recovery from a custom recovery
Click to expand...
Click to collapse
Thank you .
Hi I have a few questions
I'm on B32 roted Whit magisk ...
I want to sell my phone and want to put it back to stock
Already downloaded b32 from ZTE ...
Do I just uninstall magisk and flash stock recovery ? Right after that let the phone boot and lock the boatloader ? If I'm missing a step help it's always appreciate
luisaet82 said:
Hi I have a few questions
I'm on B32 roted Whit magisk ...
I want to sell my phone and want to put it back to stock
Already downloaded b32 from ZTE ...
Do I just uninstall magisk and flash stock recovery ? Right after that let the phone boot and lock the boatloader ? If I'm missing a step help it's always appreciate
Click to expand...
Click to collapse
Flash stock recovery, then flash the B32 that you downloaded from ZTE and also do a factory reset. After that I think you can lock.
P.S where did you get the stock recovery from?
Choose an username... said:
Flash stock recovery, then flash the B32 that you downloaded from ZTE and also do a factory reset. After that I think you can lock.
P.S where did you get the stock recovery from?
Click to expand...
Click to collapse
I extract the factory IMG from the b32 I downloaded from ZTE I'm I doing it wrong ?
luisaet82 said:
I extract the factory IMG from the b32 I downloaded from ZTE I'm I doing it wrong ?
Click to expand...
Click to collapse
Nah it's okay.
Just install B32 from the stock recovery.
relock /unlock the boatloader,it just work on mm.....mybe.you can try
kurey said:
relock /unlock the boatloader,it just work on mm.....mybe.you can try
Click to expand...
Click to collapse
that would brick the phone unless it was completely stock...