Database Users

[Guide]Unlock Bootloader&Install Twrp And Flash Cm12.1 All in One For Meizu M2/Mini

[Guide]Unlock Bootloader&Install Twrp And Flash Cm12.1 All in One For Meizu M2/Mini
First Unlock Bootloader& Install Twrp .​
Note:This Is Modified Guide Of Unlock Bootloader And Flash Twrp with Installation Of Cm12.1 Rom
DISCLAIMER:
Unlocking the bootloader cause warranty void :silly: ,I do not give guarantee of possibility of relock bootloader again .I am not responsible for the risk bootloop, softbrick, hardbrick, so the 2nd world war, natural disasters, atomic bombs, etc: v: v: Unlocking the bootloader cause loss of files in internal memory (full reset), backup all apk use ES file explorer or any application and do not forget the important data in Internal memoy.So you have to be patient and read well.
BASICS NEEDS:
Flyme 4.5.4I(International Version Only Not Indian Version) If not have first download It from here ->
www.flymeos.com/firmwarelist?modelId=18&type=1
PC / Laptop winXp or Above
and Minimal ADB Driver download here ->
http://forum.xda-developers.com/showthread.php?t=2317790
Rooted Meizu mini M2 (M2/Mini ONLY !!!)
Busybox already installed,if not then download from Play Store
File unlock the bootloader and TWRP download here ->
http://www37.zippyshare.com/v/fvm5edpr/file.html
ADB and Fastboot Files downloaded at ->
https://goo.gl/mZzVS4
(Specifically Windows 8 and above) Disable driver signature that ADB Mediatek detected.
How: Go start button -> type and select advanced startup option -> select restart now -> select troubleshoot -> select advanced option -> select the startup settings -> select restart -> wait for it to reboot and enter the blue screens -> type the numbers -> wait until the computer / laptop restart
STEPS: :highfive:
Extract "file_root.zip" in PC / Laptop drive anywhere, it's up to you.And extract files unlock_bootloader_with_new_twrp put the file "twrp_2.8.7.0.img" in the folder of "file_root.zip"put the file "unlock_bootloader.sh" in to external folder, open your phone go to Settings accessibility ->Developer option -> USB debugging -> Tick To ON plug Your Meizu m2 into laptop/PC go to
File_root.zip folder copy all files and Paste it in the Minimal ADB Driver Folder then Install Minimal ADB .(Keep In mind Minal Adb Driver Folder should include file_root folder in it if not then copy folder and paste it there unless You will get error in detecting device).
Write "adb devices",wait for it to detect the device. If detected as "unauthorized" , please check again, there must be a warning. Select the checkbox and select OK, will eventually checked again be detected serial number
in your pc/laptop type "adb shell"type "su", check if there notification in phone.
And asked permission root, select grant permission then type.
"sh /storage/sdcard1/unlock_bootloader.sh"
wait until it says "now you can fastboot oem unlock your device"then type
"adb reboot bootloader"then type "
fastboot devices" to check whether fastboot already entered yet. if it has been entered, it will be detected.
Then type "fastboot oem unlock" push the button Vol UP and wait. once completed, the screen will be stuck. Do not panic, because this is not like brick hard reboot (press the power button for about 10 seconds to death and on again) Congratulations, you have bootloop (still unfinished the process by the way.
3)enter recovery (when bootloop direct press Power + Vol UP to vibrate)The Select Wipe Data Factory reset .
push restart wait for 10 minutes.You've done Unlock Bootloader
Bootloader is already unlock yet, how To flash TWRP
enter the command prompt (go to the folder "file_root" hold down the keyboard Shift + right click on the mouse/touchpad select "open command windows here) "adb reboot bootloader"enter fastboot like stated above.Then type.
"fastboot flash recovery twrp_2.8.7.0.img"
wait a minute turn off thr phone. and enter recovery (Power + vol up until vibration)you'll Be in TWRP
Now It's Time To Flash Cm 12.1
Note: As i Told You To Flash Flyme 4.5.4i(international Version)First.If still not installed then you will not able to install Cm12.1
Why?
Ans: As this rom is for Meizu M2 mini and model number of both devices Meizu M2 and Meizu m2 mini are not same so in this rom its developer had scripted a script in that it will not allow you to install Cm12.1 until it Check Ether Its Meizu M2 mini or not(Our is meizu m2) if it had some problem it will decline further installation process
Like this "Error In Executing Updater Binary In Zip"
Steps for installing rom
1.Unlock bootloader
2.Install Twrp
3.download Cm12.1.zip in SD
4.reboot to recovery
5.wipe everything( It Can Wipe Your Internal Storage too So i recommend You to Get Internal Storage Backup Too)
6.install zip
8.reboot to system
It will take time for first boot so don't worry.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: Still Not Able to flash error still comes
then try this two below given steps
1)Try with Flyme 5 beta version it can be flashed(untested)
2)Decompress Cm12.1 custom rom then go to bin folder there will be a file name"otasigcheck.sh"
Delete that file recompress whole rom again.
not recompress whole folder just recompress all files wich will be there eg :boot.img,system,bin etc (tested working 100%)
After this you may not able to get features update so you if you want to update download manually
"Credits"
Developer Of Cm12.1 :good: (Most Thankful Person)
Murtaza Piplod (Whole New Guide Noob Friendly )
My All co workers :highfive:

Good job

sir, i installed twrp.img on meizu m2 mini (flyme 5.1.11 g) with flashify without unlocking bootloader. Now my meizu m2 is stuck on meizu logo and continuously restart with a little vibration. No recovery is working. Only fastboot mode is working. How i can solve this?

twrp meizu m2
jai aplique cet method et jai re
usi merci baucou.

salman.ecti said:
sir, i installed twrp.img on meizu m2 mini (flyme 5.1.11 g) with flashify without unlocking bootloader. Now my meizu m2 is stuck on meizu logo and continuously restart with a little vibration. No recovery is working. Only fastboot mode is working. How i can solve this?
Click to expand...
Click to collapse
Rip dude you just finished your phone
why you guys do this -_-

how to unlock bootloader
my fhone is enter only to fastboot
how to unlock bootloader???????????????????????????
[email protected]

moshe3150 said:
my fhone is enter only to fastboot
how to unlock bootloader???????????????????????????
[email protected]
Click to expand...
Click to collapse
a guy can fix this i will tell him to contact you

try to repair using UFI box. @salman.ecti

Dear murtaza1326,
How can i switch from Flyme 5.1.7.0Y to Flyme 6.1.0.0G?
What i need to do?
Thanks in advance..

Ro33_Y said:
Dear murtaza1326,
How can i switch from Flyme 5.1.7.0Y to Flyme 6.1.0.0G?
What i need to do?
Thanks in advance..
Click to expand...
Click to collapse
i will write a guide for it

Dear murtaza1326,
I'm sorry I'm nagging, but maybe you have a link to how to make the switch between the versions?
I need the device urgently, and I don't want to ruin it again, especially after I paid for the repair.

murtaza1326 said:
i will write a guide for it
Click to expand...
Click to collapse
In the Steps given in the guide, it says- "go to
File_root.zip folder copy all files and Paste it in the Minimal ADB Driver Folder then Install Minimal ADB."
I have installed Minimal ADB driver from the link http://forum.xda-developers.com/showthread.php?t=2317790 mentioned earlier in the guide. Do i need to copy all the contents of the File_root.zip folder to the folder which is created upon installing ADB from the link you mentioned (because it also asks to replace 4 files which pre exist there) or copy the contents to a new folder because i am having problem understanding this step.
Thnx!

lilcat1 said:
In the Steps given in the guide, it says- "go to
File_root.zip folder copy all files and Paste it in the Minimal ADB Driver Folder then Install Minimal ADB."
I have installed Minimal ADB driver from the link http://forum.xda-developers.com/showthread.php?t=2317790 mentioned earlier in the guide. Do i need to copy all the contents of the File_root.zip folder to the folder which is created upon installing ADB from the link you mentioned (because it also asks to replace 4 files which pre exist there) or copy the contents to a new folder because i am having problem understanding this step.
Thnx!
Click to expand...
Click to collapse
just paste recovery.img and unlock bootloader file and its done

OK done

Helpful notes. Thanks sir.
I have meizu m2 n YU yureka
Can I use same procedure for YU yureka

Dsnagi2811 said:
Helpful notes. Thanks sir.
I have meizu m2 n YU yureka
Can I use same procedure for YU yureka
Click to expand...
Click to collapse
Method of unlocking will be different.

adarshm4you said:
Yu is not yureka its yunos which is chinese based flyme os.Install flyme 4 to unlock bootloader first.
Click to expand...
Click to collapse
I already upgraded to cm13 in yureka. But still lagging to upgrade meizu m2

Dsnagi2811 said:
I already upgraded to cm13 in yureka. But still lagging to upgrade meizu m2
Click to expand...
Click to collapse
This upgrade procedure is only for meizu.It might not suitable for yureka.Methods will be different.
Check yu yureka forum on xda for support bro.There will be thread for that.
What is problem you facing on upgrading m2?

adarshm4you said:
This upgrade procedure is only for meizu.It might not suitable for yureka.Methods will be different.
Check yu yureka forum on xda for support bro.There will be thread for that.
What is problem you facing on upgrading m2?
Click to expand...
Click to collapse
Can i follow same method to unlock bootloader and install twrp recovery in meizu m2. But go for different roms

Dsnagi2811 said:
Can i follow same method to unlock bootloader and install twrp recovery in meizu m2. But go for different roms
Click to expand...
Click to collapse
Yes you can use abow method.Better is follow vedios in youtube for better understanding unlocking m2 before doing.

[Recovery]TWRP 3.0.2-0 For j2lte

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project (TWRP), is an open-source software custom recovery image for Android-based devices.It provides a touchscreen-enabled interface which allows users to install third-party firmware and backup the current system, which are often unsupported by stock recovery images.It is, therefore, often installed when rooting Android devices.
FEATURES-->>
•MTP support
•USB Mass Storage support
•Micro SDcard and USB OTG storage support
•f2fs file system support (read, write, format, backup & restore)
•exFAT file system support (read, write, format, backup & restore)
•NTFS file system support (read, write, format)
•ADB root
•Full SELinux support
•Built in android 6.0 tree
Downloads-->>
•Link To Download From Official Website-->>Here
Installation-->>
•In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
•Now go to Settings -> Developer options. (above About device).
•You need to enable OEM unlock, otherwise you might end up with boot problems or be unable to flash later on.
•Extract Odin_3.10.7.zip to your computer.
•Install Samsung Mobile Phone Drivers for Odin to find your device.
•Download a .tar image of TWRP For J2.
•Reboot your device into Download mode. To do this, select reboot from the power menu and hold the [Volume Down] + [Home] buttons while your device reboots.
•Once you reach the Download mode warning screen, press [Volume Up] to continue.
•Open Odin and place that TWRP tar file in the [AP] slot without touching any other options, then press [Start].
•Hold [Volume Up] + [Home] buttons near the end of the flash, and keep holding them until you are in recovery.
Sources-->>
•TWRP-->>https://github.com/omnirom/android_bootable_recovery
•Device Tree-->>https://github.com/TeamWin/device_samsung_j2lte
•Kernal Source-->>https://github.com/CTXz/android_kernel_samsung_j2lte
Gerrit For TWRP-->>http://gerrit.omnirom.org/
Enjoy It
XDA:DevDB Information
TWRP 3.0.2-0, Tool/Utility for Samsung Galaxy J2 (see above for details)
Contributors
Albe96, Dees_Troy
Source Code: https://github.com/omnirom/android_bootable_recovery
Version Information
Status: Stable
Current Stable Version: 3.0.2-0
Stable Release Date: 2016-04-04
Created 2016-08-18
Last Updated 2016-08-18

Changelogs-->>
Code:
3.0.2-0:
•Fix a bug with the input box that affected masked inputs (passwords). This fixes decrypt of full device encryption on devices that support decrypt. This bug also impacts encrypted backups. Users are highly encouraged to stop using 3.0.1 if you use encrypted backups or if you need decrypt of data in TWRP.
•Add Greek translation to some builds.
3.0.1-0:
•support new CM 13.0 pattern encryption (sultanqasim).
•fix slow flashing issue due to modprobe (present on only some devices) (#twrp).
•libtar updated to latest upstream and fixes (jcadduono).
•fixes for loading custom themes (_that).
•TWRP will now detect and install TWRP themes automatically through the normal zip install process (Dees_Troy).
•translation updates - added Italian, Czech and Polish and significant updates to Dutch
•progress bar improvements - progress bar updates during image flashing and better tracks progress during file system backups (tar) (Dees_Troy).
•fix input box text display (Dees_Troy).
•reboot option after zip install complete (bigbiff).
•other mostly invisible bug fixes and improvements.
3.0.0-0
•Completely new theme - Much more modern and much nicer looking (by z31s1g).
•True Terminal Emulator - Includes arrow keys, tab and tab completion, etc. (by _that).
•Language translation - It won't be perfect and especially some languages that require large font files like Chinese & Japanese won't be availble on most devices. Also some languages may only be partially translated at this time. Feel free to submit more translations to OmniROM's Gerrit. (mostly by Dees_Troy).
•Flashing of sparse images - On select devices you will be able to flash some parts of factory images via the TWRP GUI (by HashBang173).
•Adopted storage support for select devices - TWRP can now decrypt adopted storage partitions from Marshmallow
Reworked graphics to bring us more up to date with AOSP - includes support for adf and drm graphics (by Dees_Troy).
•SuperSU prompt will no longer display if a Marshmallow ROM is installed.
•Update exfat, exfat fuse, dosfstools (by mdmower).
•Update AOSP base to 6.0!
•A huge laundry list of other minor fixes and tweaks.

One More

Which J2 2016 ? Model No ?

sam razzy said:
Which J2 2016 ? Model No ?
Click to expand...
Click to collapse
No.Its for j2 2015
Sent from my SM-G935F using Tapatalk

I follow some of tutorials in youtube about installing TWRP in j200f but all of them still boots in stock system boot recovery, and failed to flash TWRP. and now i notice in your last step of instruction on installation, that i should go to the boot recovery by doing this "Hold [Volume Up] + [Home] buttons near the end of the flash, and keep holding them until you are in recovery." should i wait for the RESET message in ODIN window? before i do the boot recovery mode? what do you mean "near the end of the flash" help please.

maxxetan said:
I follow some of tutorials in youtube about installing TWRP in j200f but all of them still boots in stock system boot recovery, and failed to flash TWRP. and now i notice in your last step of instruction on installation, that i should go to the boot recovery by doing this "Hold [Volume Up] + [Home] buttons near the end of the flash, and keep holding them until you are in recovery." should i wait for the RESET message in ODIN window? before i do the boot recovery mode? what do you mean "near the end of the flash" help please.
Click to expand...
Click to collapse
Nope.just go to recovery!

can you help me to root j200f using this TWRP? please...

maxxetan said:
can you help me to root j200f using this TWRP? please...
Click to expand...
Click to collapse
Why not?

not boot to TWRP recovery
Albe96 said:
Nope.just go to recovery!
Click to expand...
Click to collapse
i used ODIN3_v3.11.1 to flash j200f after flash it using odin it say RESET and 0 failed, then when i boot to recovery it still boots in stock system boot recovery, same problem in some youtube tutorials any solutions please.

maxxetan said:
i used ODIN3_v3.11.1 to flash j200f after flash it using odin it say RESET and 0 failed, then when i boot to recovery it still boots in stock system boot recovery, same problem in some youtube tutorials any solutions please.
Click to expand...
Click to collapse
At first i also faced this error[emoji23] [emoji23] !
To avoid this follow these steps-->>
1.Download The Files(TWRP,Odin,A Stable SuperSU.zip)
2.Open Odin.exe as administrator.
3.Uncheck The "Auto Reset"/"Reset" Option.
4.Click On AP/PDA option and choose the recovery img.tar file.
5.Simply Flash.
6.After Done,Boot Into Recovery Manually.

@Albe96 thanks i can now successfully boot into TWRP then start flashing superSU but then it stuck in bootloop (samsung logo) please help, i dont know the cause if it is flashing TWRP or the supersu that i flash using TWRP. help me please.

maxxetan said:
@Albe96 thanks i can now successfully boot into TWRP then start flashing superSU but then it stuck in bootloop (samsung logo) please help, i dont know the cause if it is flashing TWRP or the supersu that i flash using TWRP. help me please.
Click to expand...
Click to collapse
Use a stable version of SuperSU.Like V2.46!

maxxetan said:
@Albe96 thanks i can now successfully boot into TWRP then start flashing superSU but then it stuck in bootloop (samsung logo) please help, i dont know the cause if it is flashing TWRP or the supersu that i flash using TWRP. help me please.
Click to expand...
Click to collapse
Make sure you have checked the option OEM UNLOCKING and USB DEBUGGING in development mode.
Also the latest super su zip also works.

Is this Samsung j200f model..?

imranpopz said:
Is this Samsung j200f model..?
Click to expand...
Click to collapse
Yes

is it work for j200g?

bambitoswa said:
is it work for j200g?
Click to expand...
Click to collapse
yep

Any custom rom available for j200f ?

Lenovo P2 Root Tool

Lenovo P2 Root Tool
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download
Instructions
Bootloader Unlock
1. Open settings in your phone
2. Scroll down to the last open about phone
3. Find the option build number, tap on it continuously until you see a toast message "You are now a developer"
4. Now go back and open the developer options, Find the option usb debugging & enable it
5. Now enable OEM-Unlock , you need to accept one licence agreement by lenovo, In next page you need to login/signup with
lenovo id
6. After submitting request , you need to wait 14 days for unlocking OEM (Bootloader)
Warranty
After subbmitting oem-unlock request also your device will have warranty officially
After Clicking on OEM-Unlock Button in my tool, Your device will losse warranty officially
But in Lenovo website it shows your device still in warranty for 365 days from date of purchasing this mobile
Tool Setup
1. Download my Root Tool into your pc
2. No need to install this software, Just double click on it like opening a file in pc
3. Now click on drivers to install lenovo usb drivers in your pc
OEM unlock after 14 days
1. Copy all data in your mobile to pc or to any other mobile, because now all the data on phone gonna erase including apps ,
photos
2. Connect your Mobile to pc, And click on oem unlock
3. Now your phone will automatically boots into fastboot mode
4. Your device OEM will gonna unlock now (No need to do anything , sit back and relax !)
5. After unlocking oem successfully
6. you will get a message that oem unlocked successfully in PC
7. Your device will reboot from fastboot mode to normal mode
8. Login with your google account which signed into device previously doing these process
TWRP & Magisk Install
1. As we know mobile reseted (erased) after reset, so again enable developer options and usb debugging
2. Connect mobile to PC, Launch P2 Root Tool
3. Click on TWRP install button to install twrp in your phone
4. Now your phone will again boot into fastboot mode to install twrp, after installing twrp, now phone boots to twrp recovery
5. Now click on root in pc and choose root provider (supersu or magisk) just click on magisk
6. Now magisk.zip will sends to phone, click on install in twrp menu, and choose magisk.zip and swipe to confirm install
7. It may take a minute to install magisk in your phone, after installation click on reboot system
Features
Reboot Manager - You can reboot device to different modes (Normal, Recovery, Bootloader)
OEM-Unlock - Unlock P2's bootloader with one click (Need to wait 14 days from date of requesting oem unlock)
Root Manager - Can root device either SuperSu , Magisk
Drivers - You can install Lenovo USB drivers
Stock Images - You can install stock Boot or Recovery images to pc
TWRP Install - You can install twrp in your phone with one click
Screenshots
Still Have doubts ??
You can reach me via telegram chat
Watch a tutorial video on Rooting P2 with this tool in my youtube channel
Like my work offer me a coffee, no matter it may be a small cup or large cup
PayTm Donation Link
PayPal Donation Link
XDA:DevDB Information
Lenovo P2 Root Tool, Tool/Utility for the Lenovo P2
Contributors
Varun Sai
Version Information
Status: Stable
Current Stable Version: 2.0
Stable Release Date: 2018-07-07
Created 2018-06-07
Last Updated 2018-12-25

Reserved

Reserved

good job bro ?

Excellent work bro

tank you

perfect tool !

Another grateful user :good:

OEM-Unlock will delete my files on the phone?

haqy said:
OEM-Unlock will delete my files on the phone?
Click to expand...
Click to collapse
no it won't do that
but when you flash the TWRP recovery you should definitely have the files backed up.

[/COLOR]
haqy said:
OEM-Unlock will delete my files on the phone?
Click to expand...
Click to collapse
Yes
Varun Sai said:
OEM unlock after 14 days
1. Copy all data in your mobile to pc or to any other mobile, because now all the data on phone gonna erase including apps ,
photos
Click to expand...
Click to collapse

ZTE Blade V9 Vita, Install TWRP, Root & Custom Rom without bootloader unlock

Before doing this, carefully read the material and read the instructions. If you do everything point by point, then you will succeed.
1. Setup
Donwload the following utilities:
Partitions Flashing Tool - Universal partition tools for qualcomm snapdragon 435
http://4pda.ru/forum/index.php?s=&showtopic=952274&view=findpost&p=85383238
Custom Recovever - TWRP-3.3.1.0-V9Vita.img
https://drive.google.com/file/d/1diPzJ_qcZRvzVFPRdE139ggCk9vgzG72/view?usp=sharing
Disable encryption - Disable_Dm-Verity_ForceEncrypt_08.02.2019[1].zip (attached in theme)
2. Install
When you download all utillites, unpack Partition Flasting Tool in any folder and open batch file - PFT_V1.5_EN.bat, connect you're smartphone to PC, and press in utillites number 2 (ADB to Reboot EDL mode changer). You're phone go to EDL mode 9008. Tape number 4 (Backup One Partition), Enter COM Port, Enter target partition name: recovery. Next step is flash custom recovery - twrp.
Put file - TWRP-3.3.1.0-V9Vita.img in files folder, rename him in twrp.img. When is done, press number 5 (Flash one partition),
Enter COM Port:
Enter Target partition name: - recovery
Enter Flashing file name: - twrp (or your recovery file name)
After the installation of the process, turn on phone in recovery mode (VolumeUP+Power). In TWRP use swipe and go to Wipe, press right button Format Data, tape YES and OK. Done?! Go to EDL mode, use number 2 (ADB to Reboot EDL mode changer) in utillites PFT 1.5. Now need flash stock recovery (that you're backup). Use number 5 (Flash one partition),
Enter COM Port:
Enter Target partition name: - recovery
Enter Flashing file name: - recovery (or your recovery file name)
How it complete, turn on phone in recovery mode, now we are in stock recovery, press wipe data \ factory reset. Next go to EDL, use number 2 (ADB to Reboot EDL mode changer). Flash TWRP again as we as we did before. In EDL mode use press number 5 (Flash one partition):
Enter COM Port:
Enter Target partition name: - recovery
Enter Flashing file name: - twrp (or your recovery file name)
At the end of the installation, turn on phone in recovery mode (VolumeUp+Power), put zip file Disable_Dm-Verity_ForceEncrypt_08.02.2019[1].zip in any folder, flash him (this disable encryption (Otherwise you get an error - encryption failed)). When zip flash is done, reboot phone as system, now you have Working TWRP and correct Stock\Custom Roms install without error.
3. Install Custom Roms
Download any TREBLE Rom, example LineageOS 16.0:
https://forum.xda-developers.com/project-treble/trebleenabled-device-development/gsi-lineageos-16-0-gsi-arm64-ab-how-to-t3908029
Copy to phone and flash as img in system image, reboot to system, and wait for the installation process to complete. Use for your own purposes.
4. Install Custom Roms
Go to https://opengapps.org, Download any pack (pico), copy on the phone folder, reboot to recovery mode, go to Wipe, press left button - advanced wipe, tap on system (set checkbox on system), Tap on Repair or Change File System, next Change File System. Now you will not have error 70.
For root use magisk 16.0 or 16.7
Source link​ http://4pda.ru/forum/index.php?s=&showtopic=952274&view=findpost&p=88816929​

Download Files
Hi! Thanks for sharing the information. I was trying to get the "PFT_V1.5.zip" file but on the site appears to be unavailable. Do you have it available? Thanks again for sharing!

It's been like 5 years since the last time I rooted an Android device, so I'm a noob in this new methods, can anyone please tell me how to use the PFT? I can't even find my phone on any COM port, I'm stuck
lgrodriguez1987 said:
Hi! Thanks for sharing the information. I was trying to get the "PFT_V1.5.zip" file but on the site appears to be unavailable. Do you have it available? Thanks again for sharing!
Click to expand...
Click to collapse
BTW, I found this one online, I think it should work too: https://zalexanninev15.github.io/PFT2/

PFT2 works, I checked it myself. You just need to download not the latest version from the releases, there are problems with the flash!

MuchelTy6 said:
PFT2 works, I checked it myself. You just need to download not the latest version from the releases, there are problems with the flash!
Click to expand...
Click to collapse
The author has fixed all the problems in the recent update of version 1.20. I checked for past errors, there are none, so it is worth using PFT2 instead of PFT (I suppose PFT2 is a further development of the utility without the "2" in the name )

Is there an app for rooting zte blade vita v9
Is there an app for rooting zte blade vita v9 can you make an easier tutorial for rooting zte blade vita v9 and explained step by step can you reupload the files are broken links here now what other alternatives you know for rooting this cellphone??????

Incomplete root rights
neagoelaur said:
Is there an app for rooting zte blade vita v9 can you make an easier tutorial for rooting zte blade vita v9 and explained step by step can you reupload the files are broken links here now what other alternatives you know for rooting this cellphone??????
Click to expand...
Click to collapse
You can't get full root rights on your smartphone without unlocking the bootloader. The loader can't be unlocked without the factory (test) MBN file. ZTE really steamed over this.
To get incomplete root rights you need to:
1. Download the archive from this link (I'm new, you can't leave links, so take the QR code)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Extract ZIP archive, flash "bootmagisk160.fdf" to "boot" partition (or flash "bootmagisk167.fdf" [Beta])
3. Through device recovery mode, erase (wipe) all data
4. Install the file "magisk583.apk" (or "magisk591.apk" [Beta] for "bootmagisk167.fdf") on Android and check for root rights

hi, is there a video on this or something? i really cant understand the steps (at least in the PFT2 i just cant seen to make it work)

TWRP for LENOVO Tab M10 FHD - TB-X606F?

Hello, Possessing two tablets of this brand, I was wondering if a custom recovery existed for this one, I can look everywhere on all the forums, Russian, English, etc ... But, I do not find.
If anyone can create one with this SOURCE CODE from the tablet that would be super nice.

I succeded to install twrp on my lenovo x606F.
1) extract recovery.img from a downloaded full firmware
2) download "Mediatek (MTK) Auto TWRP recovery porter by Team Hovatek" v. 1.6 and use it to create a twrp.img from your recovery
3) flash your twrp image by adb:
fastboot flash recovery twrp.img
4) then flash an empty vbmeta.img that you find on team hovatek site by this command (Method 3 - Flashing vbmeta https://forum.hovatek.com/thread-32719.html ):
fastboot --disable-verity flash vbmeta vbmeta.img
5) reboot in recovery. You will receive a message that your partition is encrypted. tap "cancel" and follow the steps indicated on this page (Method 3 - Patching fstab in /vendor partition using TWRP + Text editor https://forum.hovatek.com/thread-30160.html ). You have to backup on your microsd your two fstab.* files in /vendor/etc folder and then modify as indicated. Then, by twrp, overwite them on your original files.
6) reboot in android and flash your original recovery
7) reboot in your stock recovery and make a full data erase. YOU LOST ALL YOUR PERSONAL DATA.
8) reboot in android and reinstall twrp recovery
9) reboot in your full working twrp recovery and check if it is all ok.
When you boot in your twrp, your screen is black, so you have to push power button to light your screen. You can fix it
by checking all three option in magisk manager (keep encryption, keep verity and recovey mode) and reinstall magisk root.
I'm not responsable for any damage on your device. Sorry for my english

zeldoox said:
3) flash your twrp image by adb:
4) then flash an empty vbmeta.img
Click to expand...
Click to collapse
Are you sure? TWRP Recovery Porter says that vbmeta.img must be flashed BEFORE twrp image.

I made several attempts to install twrp. When I succeeded, I installed vbmeta.img after twrp. But, during my previous attempts, I had already installed vbmeta. So, it is possible that the right steps are to install it first.

So, did anyone else succeed with these steps?

Shijune said:
So, did anyone else succeed with these steps?
Click to expand...
Click to collapse
I haven't tried, I'm afraid a bricked my tablets

Shijune said:
So, did anyone else succeed with these steps?
Click to expand...
Click to collapse
Nope. I tried 3-4 times, no way. The only result is that my tab's clock becomes late 11k seconds after each reboot

Guys someone has a working twrp image for android 10?

maks44 said:
Nope. I tried 3-4 times, no way. The only result is that my tab's clock becomes late 11k seconds after each reboot
Click to expand...
Click to collapse
I just rooted Lenovo M8 FHD TB-8705F (Android 9) using the Hovatek Method 3 guide:
flashed empty vbmeta
flashed boot.img created by Magisk

I tried the steps above with the TB-X606F on Android 10 (I used the lenovo recovery tool to rescue os and ended up with android 10) and I am unable to get it working. If I flash the generated twrp image and the vbmeta one (doesn't matter which order) and reboot recovery I get a black screen and no amount of pushing the power button gets the screen to turn on. I have not tried the boot.img file generated by Magisk yet. Anyone have any thoughts on this?

dpn982 said:
I tried the steps above with the TB-X606F on Android 10 (I used the lenovo recovery tool to rescue os and ended up with android 10) and I am unable to get it working. If I flash the generated twrp image and the vbmeta one (doesn't matter which order) and reboot recovery I get a black screen and no amount of pushing the power button gets the screen to turn on. I have not tried the boot.img file generated by Magisk yet. Anyone have any thoughts on this?
Click to expand...
Click to collapse
Can you share the download link for Lenovo recovery tool? Thanks

MisterVik said:
Can you share the download link for Lenovo recovery tool? Thanks
Click to expand...
Click to collapse
https://download.lenovo.com/consumer/mobiles/rescue_and_smart_assistant_v5.3.0.21_signed_setup.exe

Hi all,
I got my TB-X606F today and I'm having a hard time getting fastboot to work. I installed the official MTK driver from google and in my device manager its visible as Android ADB Interface
on my tablet I see the fastboot mode in the lower left corner.
fastboot devices shows nothing on cmd.
Any ideas?
OS Windows 10

MOD EDIT: See here- https://forum.xda-developers.com/t/...sb-driver-installer-tool-for-windows.3999445/
Смотрите здесь-https://forum.xda-developers.com/t/tool-latest-adb-fastboot-and-usb-driver-installer-tool-for-windows.3999445/

acocalypso said:
Hi all,
I got my TB-X606F today and I'm having a hard time getting fastboot to work. I installed the official MTK driver from google and in my device manager its visible as Android ADB Interface
on my tablet I see the fastboot mode in the lower left corner.
fastboot devices shows nothing on cmd.
Any ideas?
OS Windows 10
Click to expand...
Click to collapse
I have the same problem and can't proceed rooting for this reason.
adb works fine. Device is shown, commands like reboot into fastboot mode works fine. But "fastboot devices" does not show an entry.
I've tried to (re-) install the drivers CDC, VCOM, ... several times. I'v tried the "Latest ADB Fastboot and USB Driver installer tool for Windows". Doesn't work.
In device manager, Android Bootloader Interface is shown with an error.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any ideas?

To fix this update your driver to Samsung's adb interfrance and it will work.

I got my TB-X606F rooted but struggle to install TWRP. I believe I'm on Android 10, the latest? I used [Hovatek] Mediatek Auto TWRP Recovery Porter V1.7a by Team Hovatek because I couldn't find version 1.6. I got the recovery.img directly from TB-X606F_S300007_200923_BMP.zip. I select Android 10 in the Android Version and output the TWRP recovery. Then I flashed and flashed the vbmeta (both the version from my zip file and the version from Hovatek. Then I flashed using multiple instructions. When I boot to recovery, it just gives the orange box screen then eventually fully boots to OS. Anything I'm forgetting?

I upgraded to Android 10. I installed again twrp by "Mediatek Auto TWRP Recovery Porter V1.7a". Android 10 version don't work well. "Pie Kernel 4.9.117" version works perfectly. The steps I follow are similar to my previous post. Insted of "forceencrypt" there is "forcefdeorfbe" in fstab.mt6765 file.

zeldoox said:
I upgraded to Android 10. I installed again twrp by "Mediatek Auto TWRP Recovery Porter V1.7a". Android 10 version don't work well. "Pie Kernel 4.9.117" version works perfectly. The steps I follow are similar to my previous post. Insted of "forceencrypt" there is "forcefdeorfbe" in fstab.mt6765 file.
Click to expand...
Click to collapse
How did you get twrp installed plz help

zeldoox said:
I upgraded to Android 10. I installed again twrp by "Mediatek Auto TWRP Recovery Porter V1.7a". Android 10 version don't work well. "Pie Kernel 4.9.117" version works perfectly. The steps I follow are similar to my previous post. Insted of "forceencrypt" there is "forcefdeorfbe" in fstab.mt6765 file.
Click to expand...
Click to collapse
Can you plz make a video of your steps?