Database Users

[Guide]Unlock Bootloader&Install Twrp And Flash Cm12.1 All in One For Meizu M2/Mini

[Guide]Unlock Bootloader&Install Twrp And Flash Cm12.1 All in One For Meizu M2/Mini
First Unlock Bootloader& Install Twrp .​
Note:This Is Modified Guide Of Unlock Bootloader And Flash Twrp with Installation Of Cm12.1 Rom
DISCLAIMER:
Unlocking the bootloader cause warranty void :silly: ,I do not give guarantee of possibility of relock bootloader again .I am not responsible for the risk bootloop, softbrick, hardbrick, so the 2nd world war, natural disasters, atomic bombs, etc: v: v: Unlocking the bootloader cause loss of files in internal memory (full reset), backup all apk use ES file explorer or any application and do not forget the important data in Internal memoy.So you have to be patient and read well.
BASICS NEEDS:
Flyme 4.5.4I(International Version Only Not Indian Version) If not have first download It from here ->
www.flymeos.com/firmwarelist?modelId=18&type=1
PC / Laptop winXp or Above
and Minimal ADB Driver download here ->
http://forum.xda-developers.com/showthread.php?t=2317790
Rooted Meizu mini M2 (M2/Mini ONLY !!!)
Busybox already installed,if not then download from Play Store
File unlock the bootloader and TWRP download here ->
http://www37.zippyshare.com/v/fvm5edpr/file.html
ADB and Fastboot Files downloaded at ->
https://goo.gl/mZzVS4
(Specifically Windows 8 and above) Disable driver signature that ADB Mediatek detected.
How: Go start button -> type and select advanced startup option -> select restart now -> select troubleshoot -> select advanced option -> select the startup settings -> select restart -> wait for it to reboot and enter the blue screens -> type the numbers -> wait until the computer / laptop restart
STEPS: :highfive:
Extract "file_root.zip" in PC / Laptop drive anywhere, it's up to you.And extract files unlock_bootloader_with_new_twrp put the file "twrp_2.8.7.0.img" in the folder of "file_root.zip"put the file "unlock_bootloader.sh" in to external folder, open your phone go to Settings accessibility ->Developer option -> USB debugging -> Tick To ON plug Your Meizu m2 into laptop/PC go to
File_root.zip folder copy all files and Paste it in the Minimal ADB Driver Folder then Install Minimal ADB .(Keep In mind Minal Adb Driver Folder should include file_root folder in it if not then copy folder and paste it there unless You will get error in detecting device).
Write "adb devices",wait for it to detect the device. If detected as "unauthorized" , please check again, there must be a warning. Select the checkbox and select OK, will eventually checked again be detected serial number
in your pc/laptop type "adb shell"type "su", check if there notification in phone.
And asked permission root, select grant permission then type.
"sh /storage/sdcard1/unlock_bootloader.sh"
wait until it says "now you can fastboot oem unlock your device"then type
"adb reboot bootloader"then type "
fastboot devices" to check whether fastboot already entered yet. if it has been entered, it will be detected.
Then type "fastboot oem unlock" push the button Vol UP and wait. once completed, the screen will be stuck. Do not panic, because this is not like brick hard reboot (press the power button for about 10 seconds to death and on again) Congratulations, you have bootloop (still unfinished the process by the way.
3)enter recovery (when bootloop direct press Power + Vol UP to vibrate)The Select Wipe Data Factory reset .
push restart wait for 10 minutes.You've done Unlock Bootloader
Bootloader is already unlock yet, how To flash TWRP
enter the command prompt (go to the folder "file_root" hold down the keyboard Shift + right click on the mouse/touchpad select "open command windows here) "adb reboot bootloader"enter fastboot like stated above.Then type.
"fastboot flash recovery twrp_2.8.7.0.img"
wait a minute turn off thr phone. and enter recovery (Power + vol up until vibration)you'll Be in TWRP
Now It's Time To Flash Cm 12.1
Note: As i Told You To Flash Flyme 4.5.4i(international Version)First.If still not installed then you will not able to install Cm12.1
Why?
Ans: As this rom is for Meizu M2 mini and model number of both devices Meizu M2 and Meizu m2 mini are not same so in this rom its developer had scripted a script in that it will not allow you to install Cm12.1 until it Check Ether Its Meizu M2 mini or not(Our is meizu m2) if it had some problem it will decline further installation process
Like this "Error In Executing Updater Binary In Zip"
Steps for installing rom
1.Unlock bootloader
2.Install Twrp
3.download Cm12.1.zip in SD
4.reboot to recovery
5.wipe everything( It Can Wipe Your Internal Storage too So i recommend You to Get Internal Storage Backup Too)
6.install zip
8.reboot to system
It will take time for first boot so don't worry.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: Still Not Able to flash error still comes
then try this two below given steps
1)Try with Flyme 5 beta version it can be flashed(untested)
2)Decompress Cm12.1 custom rom then go to bin folder there will be a file name"otasigcheck.sh"
Delete that file recompress whole rom again.
not recompress whole folder just recompress all files wich will be there eg :boot.img,system,bin etc (tested working 100%)
After this you may not able to get features update so you if you want to update download manually
"Credits"
Developer Of Cm12.1 :good: (Most Thankful Person)
Murtaza Piplod (Whole New Guide Noob Friendly )
My All co workers :highfive:

Good job

sir, i installed twrp.img on meizu m2 mini (flyme 5.1.11 g) with flashify without unlocking bootloader. Now my meizu m2 is stuck on meizu logo and continuously restart with a little vibration. No recovery is working. Only fastboot mode is working. How i can solve this?

twrp meizu m2
jai aplique cet method et jai re
usi merci baucou.

salman.ecti said:
sir, i installed twrp.img on meizu m2 mini (flyme 5.1.11 g) with flashify without unlocking bootloader. Now my meizu m2 is stuck on meizu logo and continuously restart with a little vibration. No recovery is working. Only fastboot mode is working. How i can solve this?
Click to expand...
Click to collapse
Rip dude you just finished your phone
why you guys do this -_-

how to unlock bootloader
my fhone is enter only to fastboot
how to unlock bootloader???????????????????????????
[email protected]

moshe3150 said:
my fhone is enter only to fastboot
how to unlock bootloader???????????????????????????
[email protected]
Click to expand...
Click to collapse
a guy can fix this i will tell him to contact you

try to repair using UFI box. @salman.ecti

Dear murtaza1326,
How can i switch from Flyme 5.1.7.0Y to Flyme 6.1.0.0G?
What i need to do?
Thanks in advance..

Ro33_Y said:
Dear murtaza1326,
How can i switch from Flyme 5.1.7.0Y to Flyme 6.1.0.0G?
What i need to do?
Thanks in advance..
Click to expand...
Click to collapse
i will write a guide for it

Dear murtaza1326,
I'm sorry I'm nagging, but maybe you have a link to how to make the switch between the versions?
I need the device urgently, and I don't want to ruin it again, especially after I paid for the repair.

murtaza1326 said:
i will write a guide for it
Click to expand...
Click to collapse
In the Steps given in the guide, it says- "go to
File_root.zip folder copy all files and Paste it in the Minimal ADB Driver Folder then Install Minimal ADB."
I have installed Minimal ADB driver from the link http://forum.xda-developers.com/showthread.php?t=2317790 mentioned earlier in the guide. Do i need to copy all the contents of the File_root.zip folder to the folder which is created upon installing ADB from the link you mentioned (because it also asks to replace 4 files which pre exist there) or copy the contents to a new folder because i am having problem understanding this step.
Thnx!

lilcat1 said:
In the Steps given in the guide, it says- "go to
File_root.zip folder copy all files and Paste it in the Minimal ADB Driver Folder then Install Minimal ADB."
I have installed Minimal ADB driver from the link http://forum.xda-developers.com/showthread.php?t=2317790 mentioned earlier in the guide. Do i need to copy all the contents of the File_root.zip folder to the folder which is created upon installing ADB from the link you mentioned (because it also asks to replace 4 files which pre exist there) or copy the contents to a new folder because i am having problem understanding this step.
Thnx!
Click to expand...
Click to collapse
just paste recovery.img and unlock bootloader file and its done

OK done

Helpful notes. Thanks sir.
I have meizu m2 n YU yureka
Can I use same procedure for YU yureka

Dsnagi2811 said:
Helpful notes. Thanks sir.
I have meizu m2 n YU yureka
Can I use same procedure for YU yureka
Click to expand...
Click to collapse
Method of unlocking will be different.

adarshm4you said:
Yu is not yureka its yunos which is chinese based flyme os.Install flyme 4 to unlock bootloader first.
Click to expand...
Click to collapse
I already upgraded to cm13 in yureka. But still lagging to upgrade meizu m2

Dsnagi2811 said:
I already upgraded to cm13 in yureka. But still lagging to upgrade meizu m2
Click to expand...
Click to collapse
This upgrade procedure is only for meizu.It might not suitable for yureka.Methods will be different.
Check yu yureka forum on xda for support bro.There will be thread for that.
What is problem you facing on upgrading m2?

adarshm4you said:
This upgrade procedure is only for meizu.It might not suitable for yureka.Methods will be different.
Check yu yureka forum on xda for support bro.There will be thread for that.
What is problem you facing on upgrading m2?
Click to expand...
Click to collapse
Can i follow same method to unlock bootloader and install twrp recovery in meizu m2. But go for different roms

Dsnagi2811 said:
Can i follow same method to unlock bootloader and install twrp recovery in meizu m2. But go for different roms
Click to expand...
Click to collapse
Yes you can use abow method.Better is follow vedios in youtube for better understanding unlocking m2 before doing.

Xiaomi Redmi 2 2014811 bricked after updating SuperSu binary in recovery?

I'm not rly good with electronics etc, my phone came with root access permissions via Security MIUI app so I installed SuperSu to manage it easier (MIUI app reqiured to manually check each app to allow access), no custom ROM or anything installed, the way it happened was
1. updated supersu from google play
2. entered supersu app,it asked me to update su binary
3. I clicked yes through recovery
4. it rebooted and got bootlooped.
It's stuck at the "mi.com" screen when turning on, can't go into recovery, fastboot mode only shows an image of Miui mascot without any fastboot options. I've followed some tutorials online and got the thing below from minimal adb.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

sufoc said:
I'm not rly good with electronics etc, my phone came with root access permissions via Security MIUI app so I installed SuperSu to manage it easier (MIUI app reqiured to manually check each app to allow access), no custom ROM or anything installed, the way it happened was
1. updated supersu from google play
2. entered supersu app,it asked me to update su binary
3. I clicked yes through recovery
4. it rebooted and got bootlooped.
It's stuck at the "mi.com" screen when turning on, can't go into recovery, fastboot mode only shows an image of Miui mascot without any fastboot options. I've followed some tutorials online and got the thing below from minimal adb.
Click to expand...
Click to collapse
Fastboot will show that android icon only.
No fastboot options will be available there.
Now you need to perform some steps to recover your device..
Note - Your data will be wiped. Also, remove memory card (if any).
Now let's start the process -:
Download MIUI Fastboot ROM file.
Here's the link..
1GB RAM model - http://update.miui.com/updates/v1/fullromdownload.php?d=wt88047_global&b=F&r=global&n=
2GB RAM model - http://update.miui.com/updates/v1/fullromdownload.php?d=wt88047_pro_global&b=F&r=global&n=
Also extract this file and put in C Drive.
Now turn your PC on..
And install latest Mi flash tool. http://api.bbs.miui.com/url/MiFlash
Turn your device off. By pulling battery. (Assuming that your device is in bootloop).
Go to fastboot mode (power + volume down)
Now turn your PC on.
Open Mi flash tool.
Connect your device.
Click on refresh button in flash tool.
Now, it will show some random numbers. (This is your device).
Now, select your ROM fastboot file which you downloaded and extracted.
After that, choose 'flash all' and click Flash..
It will take some time.
After that your device will be rebooted.
Voila! Your device is back to life!

edit: solved

edit: solved

sethidheeraj06 said:
Fastboot will show that android icon only.
No fastboot options will be available there.
Now you need to perform some steps to recover your device..
Note - Your data will be wiped. Also, remove memory card (if any).
Now let's start the process -:
Download MIUI Fastboot ROM file.
Here's the link..
1GB RAM model - http://update.miui.com/updates/v1/fullromdownload.php?d=wt88047_global&b=F&r=global&n=
2GB RAM model - http://update.miui.com/updates/v1/fullromdownload.php?d=wt88047_pro_global&b=F&r=global&n=
Also extract this file and put in C Drive.
Now turn your PC on..
And install latest Mi flash tool. http://api.bbs.miui.com/url/MiFlash
Turn your device off. By pulling battery. (Assuming that your device is in bootloop).
Go to fastboot mode (power + volume down)
Now turn your PC on.
Open Mi flash tool.
Connect your device.
Click on refresh button in flash tool.
Now, it will show some random numbers. (This is your device).
Now, select your ROM fastboot file which you downloaded and extracted.
After that, choose 'flash all' and click Flash..
It will take some time.
After that your device will be rebooted.
Voila! Your device is back to life!
Click to expand...
Click to collapse
The fastboot rom is incorrect for my model (missmatching image and device error)

sufoc said:
The fastboot rom is incorrect for my model (missmatching image and device error)
Click to expand...
Click to collapse
Which device do you have..?
Kindly tell the model no. Such as 2014818.

sethidheeraj06 said:
Which device do you have..?
Kindly tell the model no. Such as 2014818.
Click to expand...
Click to collapse
It's the same as in the title, 2014811 TD-LTE

[Guide][X620/X626] How to Unlock Bootloader & Install TWRP & Root [MTK chipset]

[Guide][X620/X626] How to Unlock Bootloader & Install TWRP & Root [MTK chipset]
------------------------------------------------------------------------------------------------------
This Tutorial is for MTK chipset phones LeEco X620/X626
------------------------------------------------------------------------------------------------------
Prerequisites:
I) Battery charge 100%
II) You have installed windows 10 64-bit Operating System
III) Download and unzip to your PC: RECOVERY-TWRP_GS_BB72
PROCEDURE (Unlock Bootloader & Install TWRP):
1.) Go to Settings>About phone and hit the build number 7 times to unlock developer options menu.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Connect the smartphone to the PC via USB cable.
2.) Go to Settings>select Developer options>activate the three toggle Figure>
3.) Turn off the smartphone and enter into Fastboot mode by pressing simultaneously power button and volume less
4.) Click on adb_cmd.exe command contained in RECOVERY-TWRP_GS_BB72 folder and type fastboot oem unlock
5.) Click on flash_TWRP.bat command contained in RECOVERY-TWRP_GS_BB72 folder and Recovery will be flashed within a few seconds
7.) Disconnect the USB cable and pressing simultaneously power button and volume more to enter into TWRP recovery
(WARNING: a small written warning will alert us that the bootloader is unlocked, this type will appear from now on every time we will launch the TWRP)
Activate the toggle-Never show this screen During boot again and do the swipe from left to right to confirm the changes.
P.S.
Archive RECOVERY-TWRP_GS_BB72
contains new TWRP 3.0.2-0
Special thanks to: BB72
-----------------------------------------------------------------------------------------------
PROCEDURE (How to Root X620/X626):
I.) Download and copy in your phone
(SuperSU) Recovery Flashable.zip
II.) Turn off your phone.
III.) Pressing simultaneously power button and volume more enter into TWRP
IV.) Install (SuperSU) Recovery Flashable.zip without wipe.
V.) Reboot/System
----------------------------------------------------------------------------------------------
Translated and prepared by: laikexpert

[Guide][How to Full Wipe/Format] your phone [with TWRP Recovery]
https://forum.xda-developers.com/le-2/how-to/how-to-wipe-format-phone-t3546047
Translated and prepared by: laikexpert
-----------------------------------------------------------------
[Guide] How to solve notifications problem in EUI
https://forum.xda-developers.com/le-2/how-to/guide-how-to-solve-notifications-t3762705
Translated and prepared by: laikexpert

[X626] CUOCO92 [ROM 5.9.028S] Can be installed on [X620/X625] Multilingual
https://forum.xda-developers.com/le-2/development/x626-cuoco92-installed-multilingual-t3744201
LeEco X626
5.9.028S
-Multilingual ROM
-Comes with pre-installed Magisk
-No advertising and unnecessary chinese applications.
-GAPPS are built-in
------------------------------------------------------------------------------------
Based on Official Stock ROM 5.9.028S for MTK chipset phones LeEco
------------------------------------------------------------------------------------
OPTION:
------------------------------------------------
Install X626_CUOCO92_ROM
—---------------------------------------------—
on X620 / X625 phones
without any problems.
—---------------------------------------------—
Translated and prepared by: laikexpert

Is this one working on X625?

iamJASZ said:
Is this one working on X625?
Click to expand...
Click to collapse
Yes, normally.
My phone is X625

laikexpert said:
Yes, normally.
My phone is X625
Click to expand...
Click to collapse
Nice! Thanks.

This will format the internal storage right?

G4B33 said:
This will format the internal storage right?
Click to expand...
Click to collapse
This tutorial won't format the internal storage:
[ROM][X620/X626] How to Unlock Bootloader & Install TWRP [MTK chipset]

If you want to format internal storage
then use this tutorial:
[How to Full Wipe/Format] your phone [with TWRP Recovery]
https://forum.xda-developers.com/le-2/how-to/how-to-wipe-format-phone-t3546047

Questions About Installation
Thanks a lot for sharing this tool!
There are some concerns I want to figure out before I install that on mu daily phone. (by the way, it Le2 X620)
1. My current EUI ROM is version 5.9.028S, does the tool compatible with my phone ROM version?
2. Do I need to do any pre processing to my phone before I install it? Like root, clean...

There's latest stable TWRP 3.1.1 images on the 4pda forum .
Unfortunately you can't flash any custom EUI ROM on the X626 because you get the message:
"This ROM is only for X620 model"
Can someone post proper latest TWRP images for this phone?
As this one has a Grosso Shop labeling on it

TWRP 3.0.2-0
Use for the installation procedure!

TWRP 3.0.2-0
Use for the installation procedure!

adaa1262 said:
There's latest stable TWRP 3.1.1 images on the 4pda forum .
Unfortunately you can't flash any custom EUI ROM on the X626 because you get the message:
"This ROM is only for X620 model"
Can someone post proper latest TWRP images for this phone?
As this one has a Grosso Shop labeling on it
Click to expand...
Click to collapse
TWRP 3.0.2-0
Use for the installation procedure!

laikexpert said:
TWRP 3.0.2-0
Use for the installation procedure!
Click to expand...
Click to collapse
Yes I have TWRP 3.0.2-0 I've installed it from your post.
I was asking about TWRP v3.2 (the latest version)
If you're interested there's a TWRP v3.1 from some developers on 4pda but they'll won't work on Le S3 X626 as this message is displayed when installing a custom EUI ROM:
"This ROM is for X620 only please install the proper ROM for your device"

andycaco said:
Thanks a lot for sharing this tool!
There are some concerns I want to figure out before I install that on mu daily phone. (by the way, it Le2 X620)
1. My current EUI ROM is version 5.9.028S, does the tool compatible with my phone ROM version?
2. Do I need to do any pre processing to my phone before I install it? Like root, clean...
Click to expand...
Click to collapse
1.Yes
2.Check which recovery you have
-stock recovery
or
-TWRP recovery
already installed on your phone.

Hi! I have a x626 is not recognized in fastboot mode. I install TWRP with fastboot in various Le Max 2 and another x620 (in same computer). This phone don't enter into EUI or stock recovery but enter in fastboot mode. Writing the command FASTBOOT DEVICES the phone isn't listed. With FASTBOOT OEM UNLOCK or FASTBOOT FLASH RECOVERY xxxxxxx.IMG show the message: "waiting for device" and nothing more. Whats the matter?? Thank you very much!

El del 3.0 v6 said:
Hi! I have a x626 is not recognized in fastboot mode.!
Click to expand...
Click to collapse
Your possible problems:
-usb cable
-adb&fastboot drivers
-version of Windows
P.S.
I dont have any problems
with Win 10.
Everything is automatically recognized.

The ADB drivers are the same as Le Max 2, really? Im using the cable with other phones (2 differents). And SO is Windows 10 Pro x64, and works with Le Max 2 (3 phones)... Any idea? Thank you very much!

Works on Le 2 pro x625

ZTE Blade V9 Vita, Install TWRP, Root & Custom Rom without bootloader unlock

Before doing this, carefully read the material and read the instructions. If you do everything point by point, then you will succeed.
1. Setup
Donwload the following utilities:
Partitions Flashing Tool - Universal partition tools for qualcomm snapdragon 435
http://4pda.ru/forum/index.php?s=&showtopic=952274&view=findpost&p=85383238
Custom Recovever - TWRP-3.3.1.0-V9Vita.img
https://drive.google.com/file/d/1diPzJ_qcZRvzVFPRdE139ggCk9vgzG72/view?usp=sharing
Disable encryption - Disable_Dm-Verity_ForceEncrypt_08.02.2019[1].zip (attached in theme)
2. Install
When you download all utillites, unpack Partition Flasting Tool in any folder and open batch file - PFT_V1.5_EN.bat, connect you're smartphone to PC, and press in utillites number 2 (ADB to Reboot EDL mode changer). You're phone go to EDL mode 9008. Tape number 4 (Backup One Partition), Enter COM Port, Enter target partition name: recovery. Next step is flash custom recovery - twrp.
Put file - TWRP-3.3.1.0-V9Vita.img in files folder, rename him in twrp.img. When is done, press number 5 (Flash one partition),
Enter COM Port:
Enter Target partition name: - recovery
Enter Flashing file name: - twrp (or your recovery file name)
After the installation of the process, turn on phone in recovery mode (VolumeUP+Power). In TWRP use swipe and go to Wipe, press right button Format Data, tape YES and OK. Done?! Go to EDL mode, use number 2 (ADB to Reboot EDL mode changer) in utillites PFT 1.5. Now need flash stock recovery (that you're backup). Use number 5 (Flash one partition),
Enter COM Port:
Enter Target partition name: - recovery
Enter Flashing file name: - recovery (or your recovery file name)
How it complete, turn on phone in recovery mode, now we are in stock recovery, press wipe data \ factory reset. Next go to EDL, use number 2 (ADB to Reboot EDL mode changer). Flash TWRP again as we as we did before. In EDL mode use press number 5 (Flash one partition):
Enter COM Port:
Enter Target partition name: - recovery
Enter Flashing file name: - twrp (or your recovery file name)
At the end of the installation, turn on phone in recovery mode (VolumeUp+Power), put zip file Disable_Dm-Verity_ForceEncrypt_08.02.2019[1].zip in any folder, flash him (this disable encryption (Otherwise you get an error - encryption failed)). When zip flash is done, reboot phone as system, now you have Working TWRP and correct Stock\Custom Roms install without error.
3. Install Custom Roms
Download any TREBLE Rom, example LineageOS 16.0:
https://forum.xda-developers.com/project-treble/trebleenabled-device-development/gsi-lineageos-16-0-gsi-arm64-ab-how-to-t3908029
Copy to phone and flash as img in system image, reboot to system, and wait for the installation process to complete. Use for your own purposes.
4. Install Custom Roms
Go to https://opengapps.org, Download any pack (pico), copy on the phone folder, reboot to recovery mode, go to Wipe, press left button - advanced wipe, tap on system (set checkbox on system), Tap on Repair or Change File System, next Change File System. Now you will not have error 70.
For root use magisk 16.0 or 16.7
Source link​ http://4pda.ru/forum/index.php?s=&showtopic=952274&view=findpost&p=88816929​

Download Files
Hi! Thanks for sharing the information. I was trying to get the "PFT_V1.5.zip" file but on the site appears to be unavailable. Do you have it available? Thanks again for sharing!

It's been like 5 years since the last time I rooted an Android device, so I'm a noob in this new methods, can anyone please tell me how to use the PFT? I can't even find my phone on any COM port, I'm stuck
lgrodriguez1987 said:
Hi! Thanks for sharing the information. I was trying to get the "PFT_V1.5.zip" file but on the site appears to be unavailable. Do you have it available? Thanks again for sharing!
Click to expand...
Click to collapse
BTW, I found this one online, I think it should work too: https://zalexanninev15.github.io/PFT2/

PFT2 works, I checked it myself. You just need to download not the latest version from the releases, there are problems with the flash!

MuchelTy6 said:
PFT2 works, I checked it myself. You just need to download not the latest version from the releases, there are problems with the flash!
Click to expand...
Click to collapse
The author has fixed all the problems in the recent update of version 1.20. I checked for past errors, there are none, so it is worth using PFT2 instead of PFT (I suppose PFT2 is a further development of the utility without the "2" in the name )

Is there an app for rooting zte blade vita v9
Is there an app for rooting zte blade vita v9 can you make an easier tutorial for rooting zte blade vita v9 and explained step by step can you reupload the files are broken links here now what other alternatives you know for rooting this cellphone??????

Incomplete root rights
neagoelaur said:
Is there an app for rooting zte blade vita v9 can you make an easier tutorial for rooting zte blade vita v9 and explained step by step can you reupload the files are broken links here now what other alternatives you know for rooting this cellphone??????
Click to expand...
Click to collapse
You can't get full root rights on your smartphone without unlocking the bootloader. The loader can't be unlocked without the factory (test) MBN file. ZTE really steamed over this.
To get incomplete root rights you need to:
1. Download the archive from this link (I'm new, you can't leave links, so take the QR code)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Extract ZIP archive, flash "bootmagisk160.fdf" to "boot" partition (or flash "bootmagisk167.fdf" [Beta])
3. Through device recovery mode, erase (wipe) all data
4. Install the file "magisk583.apk" (or "magisk591.apk" [Beta] for "bootmagisk167.fdf") on Android and check for root rights

hi, is there a video on this or something? i really cant understand the steps (at least in the PFT2 i just cant seen to make it work)

⭐[GUIDE] How to Unbrick OnePlus 8T KB2005 Global with Locked Bootloader & EDL Mode Bugged Out!

Credits: @Dragonmaster306 for Hidden EDL Mode.
Install USB Drivers
Click to expand...
Click to collapse
OnePlus USB Driver & Qualcomm QDLoader HS USB Driver
OnePlus USB Drivers
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
1Power off your OnePlus 8T. Now enter Fastboot Mode by holding volume down plus power key at the same time. When the screen turns on let go of the power key while still holding volume down.
2Now connect your Phone to your PC with a OEM OnePlus Cable/Adapter. Download Platform Tools & extract it to your desktop. Now go to Platform Tools root folder on your PC.
Platform Tools
Click to expand...
Click to collapse
https://dl.google.com/android/repository/platform-tools-latest-windows.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Type CMD in the top address bar and hit enter a command prompt will appear.
In the command prompt type: fastboot reboot fastboot
hit enter.
"The phone will now reboot to "Fastbootd Mode"
Click to expand...
Click to collapse
Hidden OnePlus 8T EDL Mode
Click to expand...
Click to collapse
3Tap English on the first menu, Now on the second Menu Tap around the centre-bottom of the phone screen, near the 'Ver 1.2' text. It will say 'Go to download mode'. This is EDL mode.
DO NOT PRESS OK JUST YET GO TO STEP.4
4Download "MSM Unbrick Tool" OnePlus_8T_Global_OxygenOS_11.0.zip extract it to your desktop
https://onepluscommunityserver.com/list/Unbrick_Tools/OnePlus_8T/Global_KB05AA/R/OnePlus_8T_Global_OxygenOS_11.0.zip
5Run MSMDownloadTool v4.0 as Administrator
Now select Others click Next!
Select Target Type as O2
Now hit start
6Now you can hit 'OK' on the download mode prompt on your 8T. And MSM tool should detect & begin the installation process.
7Your OnePlus 8T will boot up after installation. Now go threw the setup turn your wifi on & download OxygenOS 11 or 12 or 13 of your choice below
OxygenOS 11.0.13.13
https://oxygenos.oneplus.net/OnePlus8TOxygen_15.O.31_OTA_0310_all_2202182359_ca105dab55fd44e6.zip
OxygenOS 12.1
https://android.googleapis.com/packages/ota-api/package/23c8b5ca8cb69cdbb889cc8684ac3e7dae569017.zip
OxygenOS 13
https://android.googleapis.com/packages/ota-api/package/e61f1cf7c6a55e531113091deadfb7acb96901da.zip
8Move the update from downloads folder to the Root folder of your Android file system then go to Settings>System>System Updates>Click on the Cogwheel >Local Upgrade
Select your firmware & let the Installation Finish.
9After installing OxygenOS of your choice make sure to boot into Recovery Mode and perform a Hard Reset! Clear cache & erase everything. Congratulations your done! Performing a hard reset after installation will help your OnePlus 8T run smoothly without problems & less bugs.

@auris1993 I'm still writing the guide out, adding more detail to it but it's mainly completed enough to try & unbrick your 8T thanks for the like btw.

Thank you for a detailed guide.
Though i've never heard of Global OnePlus 8T KB2005 with Unlockable Bootloader.
There may be some issues with getting token from OnePlus and unlocking bootloader on T-Mobile variants, but on other models is usually painless.

Rootk1t said:
When you gotta bricked 8T that cannot boot into Android only fastboot mode & recovery & fastbootd mode with a locked bootloader that's impossible if your OEM unlock wasn't tick on with USB Debugging on before the brick right.
Click to expand...
Click to collapse
Rootk1t said:
If your on global Firmware you don't need a unlock token to unlock the bootloader correct. Yes T-Mobile would need an unlock token of course.
Click to expand...
Click to collapse
Rootk1t said:
Also when u get bricked in this state, the EDL mode can become bugged out so it's not possible to put TWRP, Sideload Firmware, or manually put the phone into EDL Mode the usual way to use MSM Tool etc..the phone becomes an absolute paperweight Which the bootloader is "unlockable in that bricked state!"
Click to expand...
Click to collapse

@Rootk1t And thanks man, glad you liked the guide. Did you happen to brick your 8T?
This guide could be used for other variants btw I just wrote it out for the Global version for now.