Database Users

[Recovery][TWRP][SANTONI] Recovery for Redmi 4x/Redmi 4 (India)

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Click to expand...
Click to collapse
Install guide:
> Install fastboot tools from google's sdk on your PC
> Enter fastboot mode
> Unlock your bootloader
> Download recovery*.img and Lazyflasher
> Copy lazyflasher In your internal Phone memory
> Run fastboot flash recovery twrp-3.1.0-1-santoni.img in command line
> Boot into recovery and flash Lazy flasher (Important for miui, else you can boot into system)
> Reboot and enjoy it
Download:
Lazy flasher
twrp-3.1.0-1-santoni.img
Lazy flasher - updated link

Thejayyadav said:
Need recovery for Redmi 4x (China) or Redmi 4 (India)
Click to expand...
Click to collapse
You find it on MIUI official Forum, i can't post the link.

Video tutorial for rooting redmi 4/4x

I have unlocked my phone recently. And then I downloaded TWRP from "twrp.me" for my Redmi 4X. And I tried to flash it through adb and fastboot. And I successfully flashed. But unfortunately my phone doesn't boot to TWRP recovery except commanding through cmd "fastboot boot recovery.img". When I try to boot to recovery mode with volume up + power button, the stock recovery comes up. How can I fix this?

its asking password for decrypt mount at recovery startup

cssk19 said:
its asking password for decrypt mount at recovery startup
Click to expand...
Click to collapse
Clear data

twrp
incubus9867 said:
I have unlocked my phone recently. And then I downloaded TWRP from "twrp.me" for my Redmi 4X. And I tried to flash it through adb and fastboot. And I successfully flashed. But unfortunately my phone doesn't boot to TWRP recovery except commanding through cmd "fastboot boot recovery.img". When I try to boot to recovery mode with volume up + power button, the stock recovery comes up. How can I fix this?
Click to expand...
Click to collapse
Have you solved this issue? I've the same problem

Thejayyadav said:
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Install guide:
> Install fastboot tools from google's sdk on your PC
> Enter fastboot mode
> Unlock your bootloader
> Download recovery*.img and Lazyflasher
> Copy lazyflasher In your internal Phone memory
> Run fastboot flash recovery twrp-3.1.0-1-santoni.img in command line
> Boot into recovery and flash Lazy flasher (Important for miui, else you can boot into system)
> Reboot and enjoy it
Download:
Lazy flasher
twrp-3.1.0-1-santoni.img
Click to expand...
Click to collapse
Thanks buddy

i was using twrp 3.0 but as i installed latest 3.1.1 it is encrypted and asking for password . Files are also not properly flashing . System mount unmount error etc. I did factory format , data wipes and also flashed recovery using fastboot but nothing happened but when i reverted back to twrp 3.0 all the problems were solved .

Same for me, went back to 3.0.3.0, too, because of the encryption problem. This might be solved (not testet yet):
see: h11ps://forums.oneplus.net/threads/fix-wrong-pin-pattern-when-restoring-twrp-nandroid-backup.452384/page-2#post-16003616
I just edited the scipt within the zip-file to only remove the locksettings.db (without testing, yet):
see: h11ps://forums.oneplus.net/threads/fix-wrong-pin-pattern-when-restoring-twrp-nandroid-backup.452384/page-2#post-15926929
Edit: just upgraded to "TWRP 3.1.0-1 Santoni.img" (see dl-link above) which runs without any problem so far...

Use TWRP 3.1.0..
DON'T use the newest 3.1.1.0... it's faulty as sh*te

Why i am not able to boot into recovery through advanced power option? Even i tried through power and volume up buttons but failed.... Please help me....

volumeup+volumedown+power=twrp recovery
Or use the twrp app to boot into recovery, BUT do not twrp update!! It'll update to the sh*te 3.1.1 version!

Plz sign the petition if you guys want that the kernel sources must be released for redmi 4X https://www.change.org/p/xiaomi-dev...m_medium=copylink&utm_campaign=share_petition

Error 7 while flashing post 1 zip on redmi 4x
Please let me give sollution for installing pie i had error 7 while flashing post 1 zip file

JASALPURABM said:
Please let me give sollution for installing pie i had error 7 while flashing post 1 zip file
Click to expand...
Click to collapse
File download corrup

I had try that also but same issue from different downloaded file also

[Guide][X620/X626] How to Unlock Bootloader & Install TWRP & Root [MTK chipset]

[Guide][X620/X626] How to Unlock Bootloader & Install TWRP & Root [MTK chipset]
------------------------------------------------------------------------------------------------------
This Tutorial is for MTK chipset phones LeEco X620/X626
------------------------------------------------------------------------------------------------------
Prerequisites:
I) Battery charge 100%
II) You have installed windows 10 64-bit Operating System
III) Download and unzip to your PC: RECOVERY-TWRP_GS_BB72
PROCEDURE (Unlock Bootloader & Install TWRP):
1.) Go to Settings>About phone and hit the build number 7 times to unlock developer options menu.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Connect the smartphone to the PC via USB cable.
2.) Go to Settings>select Developer options>activate the three toggle Figure>
3.) Turn off the smartphone and enter into Fastboot mode by pressing simultaneously power button and volume less
4.) Click on adb_cmd.exe command contained in RECOVERY-TWRP_GS_BB72 folder and type fastboot oem unlock
5.) Click on flash_TWRP.bat command contained in RECOVERY-TWRP_GS_BB72 folder and Recovery will be flashed within a few seconds
7.) Disconnect the USB cable and pressing simultaneously power button and volume more to enter into TWRP recovery
(WARNING: a small written warning will alert us that the bootloader is unlocked, this type will appear from now on every time we will launch the TWRP)
Activate the toggle-Never show this screen During boot again and do the swipe from left to right to confirm the changes.
P.S.
Archive RECOVERY-TWRP_GS_BB72
contains new TWRP 3.0.2-0
Special thanks to: BB72
-----------------------------------------------------------------------------------------------
PROCEDURE (How to Root X620/X626):
I.) Download and copy in your phone
(SuperSU) Recovery Flashable.zip
II.) Turn off your phone.
III.) Pressing simultaneously power button and volume more enter into TWRP
IV.) Install (SuperSU) Recovery Flashable.zip without wipe.
V.) Reboot/System
----------------------------------------------------------------------------------------------
Translated and prepared by: laikexpert

[Guide][How to Full Wipe/Format] your phone [with TWRP Recovery]
https://forum.xda-developers.com/le-2/how-to/how-to-wipe-format-phone-t3546047
Translated and prepared by: laikexpert
-----------------------------------------------------------------
[Guide] How to solve notifications problem in EUI
https://forum.xda-developers.com/le-2/how-to/guide-how-to-solve-notifications-t3762705
Translated and prepared by: laikexpert

[X626] CUOCO92 [ROM 5.9.028S] Can be installed on [X620/X625] Multilingual
https://forum.xda-developers.com/le-2/development/x626-cuoco92-installed-multilingual-t3744201
LeEco X626
5.9.028S
-Multilingual ROM
-Comes with pre-installed Magisk
-No advertising and unnecessary chinese applications.
-GAPPS are built-in
------------------------------------------------------------------------------------
Based on Official Stock ROM 5.9.028S for MTK chipset phones LeEco
------------------------------------------------------------------------------------
OPTION:
------------------------------------------------
Install X626_CUOCO92_ROM
—---------------------------------------------—
on X620 / X625 phones
without any problems.
—---------------------------------------------—
Translated and prepared by: laikexpert

Is this one working on X625?

iamJASZ said:
Is this one working on X625?
Click to expand...
Click to collapse
Yes, normally.
My phone is X625

laikexpert said:
Yes, normally.
My phone is X625
Click to expand...
Click to collapse
Nice! Thanks.

This will format the internal storage right?

G4B33 said:
This will format the internal storage right?
Click to expand...
Click to collapse
This tutorial won't format the internal storage:
[ROM][X620/X626] How to Unlock Bootloader & Install TWRP [MTK chipset]

If you want to format internal storage
then use this tutorial:
[How to Full Wipe/Format] your phone [with TWRP Recovery]
https://forum.xda-developers.com/le-2/how-to/how-to-wipe-format-phone-t3546047

Questions About Installation
Thanks a lot for sharing this tool!
There are some concerns I want to figure out before I install that on mu daily phone. (by the way, it Le2 X620)
1. My current EUI ROM is version 5.9.028S, does the tool compatible with my phone ROM version?
2. Do I need to do any pre processing to my phone before I install it? Like root, clean...

There's latest stable TWRP 3.1.1 images on the 4pda forum .
Unfortunately you can't flash any custom EUI ROM on the X626 because you get the message:
"This ROM is only for X620 model"
Can someone post proper latest TWRP images for this phone?
As this one has a Grosso Shop labeling on it

TWRP 3.0.2-0
Use for the installation procedure!

TWRP 3.0.2-0
Use for the installation procedure!

adaa1262 said:
There's latest stable TWRP 3.1.1 images on the 4pda forum .
Unfortunately you can't flash any custom EUI ROM on the X626 because you get the message:
"This ROM is only for X620 model"
Can someone post proper latest TWRP images for this phone?
As this one has a Grosso Shop labeling on it
Click to expand...
Click to collapse
TWRP 3.0.2-0
Use for the installation procedure!

laikexpert said:
TWRP 3.0.2-0
Use for the installation procedure!
Click to expand...
Click to collapse
Yes I have TWRP 3.0.2-0 I've installed it from your post.
I was asking about TWRP v3.2 (the latest version)
If you're interested there's a TWRP v3.1 from some developers on 4pda but they'll won't work on Le S3 X626 as this message is displayed when installing a custom EUI ROM:
"This ROM is for X620 only please install the proper ROM for your device"

andycaco said:
Thanks a lot for sharing this tool!
There are some concerns I want to figure out before I install that on mu daily phone. (by the way, it Le2 X620)
1. My current EUI ROM is version 5.9.028S, does the tool compatible with my phone ROM version?
2. Do I need to do any pre processing to my phone before I install it? Like root, clean...
Click to expand...
Click to collapse
1.Yes
2.Check which recovery you have
-stock recovery
or
-TWRP recovery
already installed on your phone.

Hi! I have a x626 is not recognized in fastboot mode. I install TWRP with fastboot in various Le Max 2 and another x620 (in same computer). This phone don't enter into EUI or stock recovery but enter in fastboot mode. Writing the command FASTBOOT DEVICES the phone isn't listed. With FASTBOOT OEM UNLOCK or FASTBOOT FLASH RECOVERY xxxxxxx.IMG show the message: "waiting for device" and nothing more. Whats the matter?? Thank you very much!

El del 3.0 v6 said:
Hi! I have a x626 is not recognized in fastboot mode.!
Click to expand...
Click to collapse
Your possible problems:
-usb cable
-adb&fastboot drivers
-version of Windows
P.S.
I dont have any problems
with Win 10.
Everything is automatically recognized.

The ADB drivers are the same as Le Max 2, really? Im using the cable with other phones (2 differents). And SO is Windows 10 Pro x64, and works with Le Max 2 (3 phones)... Any idea? Thank you very much!

Works on Le 2 pro x625

TWRP for LENOVO Tab M10 FHD - TB-X606F?

Hello, Possessing two tablets of this brand, I was wondering if a custom recovery existed for this one, I can look everywhere on all the forums, Russian, English, etc ... But, I do not find.
If anyone can create one with this SOURCE CODE from the tablet that would be super nice.

I succeded to install twrp on my lenovo x606F.
1) extract recovery.img from a downloaded full firmware
2) download "Mediatek (MTK) Auto TWRP recovery porter by Team Hovatek" v. 1.6 and use it to create a twrp.img from your recovery
3) flash your twrp image by adb:
fastboot flash recovery twrp.img
4) then flash an empty vbmeta.img that you find on team hovatek site by this command (Method 3 - Flashing vbmeta https://forum.hovatek.com/thread-32719.html ):
fastboot --disable-verity flash vbmeta vbmeta.img
5) reboot in recovery. You will receive a message that your partition is encrypted. tap "cancel" and follow the steps indicated on this page (Method 3 - Patching fstab in /vendor partition using TWRP + Text editor https://forum.hovatek.com/thread-30160.html ). You have to backup on your microsd your two fstab.* files in /vendor/etc folder and then modify as indicated. Then, by twrp, overwite them on your original files.
6) reboot in android and flash your original recovery
7) reboot in your stock recovery and make a full data erase. YOU LOST ALL YOUR PERSONAL DATA.
8) reboot in android and reinstall twrp recovery
9) reboot in your full working twrp recovery and check if it is all ok.
When you boot in your twrp, your screen is black, so you have to push power button to light your screen. You can fix it
by checking all three option in magisk manager (keep encryption, keep verity and recovey mode) and reinstall magisk root.
I'm not responsable for any damage on your device. Sorry for my english

zeldoox said:
3) flash your twrp image by adb:
4) then flash an empty vbmeta.img
Click to expand...
Click to collapse
Are you sure? TWRP Recovery Porter says that vbmeta.img must be flashed BEFORE twrp image.

I made several attempts to install twrp. When I succeeded, I installed vbmeta.img after twrp. But, during my previous attempts, I had already installed vbmeta. So, it is possible that the right steps are to install it first.

So, did anyone else succeed with these steps?

Shijune said:
So, did anyone else succeed with these steps?
Click to expand...
Click to collapse
I haven't tried, I'm afraid a bricked my tablets

Shijune said:
So, did anyone else succeed with these steps?
Click to expand...
Click to collapse
Nope. I tried 3-4 times, no way. The only result is that my tab's clock becomes late 11k seconds after each reboot

Guys someone has a working twrp image for android 10?

maks44 said:
Nope. I tried 3-4 times, no way. The only result is that my tab's clock becomes late 11k seconds after each reboot
Click to expand...
Click to collapse
I just rooted Lenovo M8 FHD TB-8705F (Android 9) using the Hovatek Method 3 guide:
flashed empty vbmeta
flashed boot.img created by Magisk

I tried the steps above with the TB-X606F on Android 10 (I used the lenovo recovery tool to rescue os and ended up with android 10) and I am unable to get it working. If I flash the generated twrp image and the vbmeta one (doesn't matter which order) and reboot recovery I get a black screen and no amount of pushing the power button gets the screen to turn on. I have not tried the boot.img file generated by Magisk yet. Anyone have any thoughts on this?

dpn982 said:
I tried the steps above with the TB-X606F on Android 10 (I used the lenovo recovery tool to rescue os and ended up with android 10) and I am unable to get it working. If I flash the generated twrp image and the vbmeta one (doesn't matter which order) and reboot recovery I get a black screen and no amount of pushing the power button gets the screen to turn on. I have not tried the boot.img file generated by Magisk yet. Anyone have any thoughts on this?
Click to expand...
Click to collapse
Can you share the download link for Lenovo recovery tool? Thanks

MisterVik said:
Can you share the download link for Lenovo recovery tool? Thanks
Click to expand...
Click to collapse
https://download.lenovo.com/consumer/mobiles/rescue_and_smart_assistant_v5.3.0.21_signed_setup.exe

Hi all,
I got my TB-X606F today and I'm having a hard time getting fastboot to work. I installed the official MTK driver from google and in my device manager its visible as Android ADB Interface
on my tablet I see the fastboot mode in the lower left corner.
fastboot devices shows nothing on cmd.
Any ideas?
OS Windows 10

MOD EDIT: See here- https://forum.xda-developers.com/t/...sb-driver-installer-tool-for-windows.3999445/
Смотрите здесь-https://forum.xda-developers.com/t/tool-latest-adb-fastboot-and-usb-driver-installer-tool-for-windows.3999445/

acocalypso said:
Hi all,
I got my TB-X606F today and I'm having a hard time getting fastboot to work. I installed the official MTK driver from google and in my device manager its visible as Android ADB Interface
on my tablet I see the fastboot mode in the lower left corner.
fastboot devices shows nothing on cmd.
Any ideas?
OS Windows 10
Click to expand...
Click to collapse
I have the same problem and can't proceed rooting for this reason.
adb works fine. Device is shown, commands like reboot into fastboot mode works fine. But "fastboot devices" does not show an entry.
I've tried to (re-) install the drivers CDC, VCOM, ... several times. I'v tried the "Latest ADB Fastboot and USB Driver installer tool for Windows". Doesn't work.
In device manager, Android Bootloader Interface is shown with an error.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any ideas?

To fix this update your driver to Samsung's adb interfrance and it will work.

I got my TB-X606F rooted but struggle to install TWRP. I believe I'm on Android 10, the latest? I used [Hovatek] Mediatek Auto TWRP Recovery Porter V1.7a by Team Hovatek because I couldn't find version 1.6. I got the recovery.img directly from TB-X606F_S300007_200923_BMP.zip. I select Android 10 in the Android Version and output the TWRP recovery. Then I flashed and flashed the vbmeta (both the version from my zip file and the version from Hovatek. Then I flashed using multiple instructions. When I boot to recovery, it just gives the orange box screen then eventually fully boots to OS. Anything I'm forgetting?

I upgraded to Android 10. I installed again twrp by "Mediatek Auto TWRP Recovery Porter V1.7a". Android 10 version don't work well. "Pie Kernel 4.9.117" version works perfectly. The steps I follow are similar to my previous post. Insted of "forceencrypt" there is "forcefdeorfbe" in fstab.mt6765 file.

zeldoox said:
I upgraded to Android 10. I installed again twrp by "Mediatek Auto TWRP Recovery Porter V1.7a". Android 10 version don't work well. "Pie Kernel 4.9.117" version works perfectly. The steps I follow are similar to my previous post. Insted of "forceencrypt" there is "forcefdeorfbe" in fstab.mt6765 file.
Click to expand...
Click to collapse
How did you get twrp installed plz help

zeldoox said:
I upgraded to Android 10. I installed again twrp by "Mediatek Auto TWRP Recovery Porter V1.7a". Android 10 version don't work well. "Pie Kernel 4.9.117" version works perfectly. The steps I follow are similar to my previous post. Insted of "forceencrypt" there is "forcefdeorfbe" in fstab.mt6765 file.
Click to expand...
Click to collapse
Can you plz make a video of your steps?

[RECOVERY][OFFICIAL][3.6.1-x] TWRP for Galaxy Note 20 & Note 20 Ultra Exynos

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Official TWRP 3.6.1-* For Galaxy Note 20 & Note 20 Ultra​Only for exynos variants - N980F / N981B / N985F / N986B (Europe - Global, Single/Dual-SIM)
Disclaimer
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this recovery before flashing it!
YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Kernel Features:
N986BXXU3FVC5 kernel source (OneUI 4.1 / March 2022 sourcecode)
disabled uh/defex/proca/knox/rkp/rooting protection/logging/audit/useless features
Recovery Features:
Android 11 tree
built in full 64 mode
toybox/busybox support
compatible with Android 12.0 and above
Downloads:
Galaxy Note 20 (c1s / N980F / N981B)
Galaxy Note 20 Ultra (c2s / N985F / N986B)
AVB disabled vbmeta
* official TWRP builds are not up yet, you can find latest test builds in post #2, below
Instructions:
Odin (Windows)
Prerequisites: Samsung USB drivers, Odin v3.14.1
If you already have the bootloader unlocked you can skip to step 6.
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode;
Long press vol up then confirm you want to unlock bootloader (this is needed one time only);
* Please be aware all your data will be erased including internal storage and phone will reboot!!
Let the phone boot normally, pass the setup and connect to internet (wireless or mobile data) in order to unlock RMM;
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode, short press vol up to confirm you want to go to download mode;
* If by any chance you see RMM state=Prenormal or KG state=Prenormal, redo from step 5!
Download appropriate TWRP .tar file according to your device
Download AVB disabled vbmeta .tar
Open Odin v3.14.1 and place the downloaded TWRP .tar file in AP tab, downloaded vbmeta .tar file in CP tab and click Start - once you press start grab the phone and press vol up + power to force it boot straight in TWRP after flashing
!! Only if coming from full stock (magisk patched) firmware
In TWRP home screen press wipe - format data - yes
Download and flash multidisabler-samsung-3.* zip to disable security and encryption.
Heimdall (Linux)
Install heimdall & additional required packages:
Code:
sudo apt-get update
sudo apt-get install heimdall-flash android-tools-fastboot android-tools-adb libusb-0.1-4 libusb-1.0-0 libusb-1.0-0-dev
If you already have the bootloader unlocked you can skip to step 6.
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode;
Long press vol up then confirm you want to unlock bootloader (this is needed one time only);
* Please be aware all your data will be erased including internal storage and phone will reboot!!
Let the phone boot normally, pass the setup and connect to internet (wireless or mobile data) in order to unlock RMM;
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode, short press vol up to confirm you want to go to download mode;
* If by any chance you see RMM state=Prenormal or KG state=Prenormal, redo from step 5!
Download appropriate TWRP .img file according to your device
Download AVB disabled vbmeta .img
Open your preferred terminal in linux and type (replace red lines with the path of downloaded img files):
Code:
sudo heimdall flash --RECOVERY /path/to/recovery.img --VBMETA /path/to/vbmeta.img
and press enter - once you press enter grab the phone and press vol up + power to force it boot straight in TWRP after flashing
!! Only if coming from full stock (magisk patched) firmware
In TWRP home screen press wipe - format data - yes
Download and flash multidisabler-samsung-3.* zip to disable security and encryption.
TWRP
Download .img file for your device and install from your current TWRP with Install image - browse to image location and select - Recovery
dd (Requires root)
Download .img file for your device, place it in the root of your /sdcard folder, rename it to twrp.img then run the following commands via adb shell or a terminal emulator app:
Code:
su
dd if=/sdcard/twrp.img of=/dev/block/platform/13100000.ufs/by-name/recovery
!! Only if coming from full stock (magisk patched) firmware
In TWRP home screen press wipe - format data - yes
Download and flash multidisabler-samsung-3.* zip to disable security and encryption.
Sources:
Device trees - c1s / c2s
Kernel - https://github.com/corsicanu/android_kernel_samsung_universal9830/tree/android-11.0
Recovery - https://github.com/omnirom/android_bootable_recovery
Credits:
TeamWin, geiti94, jesec, dyneteve, ianmacd, testers, donors and anyone else involved in making this possible
As always, if you like what i do, you can always send me some pizza/coffee/drugs/drinks or anything else via paypal.me/corsicanu

Compatibility and changelog:
06.05.2022 - Initial TWRP 3.6.1 release
Compatibility: Android 12 (OneUI 4.0 & 4.1)
Security patch: N/A
Misc links:
TeamWin official website
Telegram Support Group
Telegram Channel
Bootloaders / modems zips
Latest Magisk stable or canary
Further reading:
Full guide of how to unlock/root your device
Background on Android Verified Boot
Rollback protection

FAQ
Q: Can i use this recovery with other firmware then mentioned in compatibility?
A: Only with same Android version or Rollback protection might kick in and you won't be able to pass the lockscreen.
Q: Where do i get vbmeta.img?
A: From here, download the one you need according to install instructions.
Q: TWRP can't mount data partition, what to do?
A: Make sure you formatted data partition.
Q: Phone is not booting even after 20 minutes
A: Try to reboot. If still not booting, make sure you flashed multidisabler zip / formatted data partition.
Q: How to format data partition?
A:
Q: Phone is showing only Samsung logo
A: Try to reboot. If still not booting, consider installing an older TWRP build or a more recent firmware. If you still don't succeed, post here some details about your device and previous firmware and we might be able to help.
Q: Why do i need to format data partition?
A: Because old firmware encrypted your data partition and new rom can't decrypt and use that content / root needs access to data partition to place misc files / phone not booting after flashing root until data partition gets formatted.

Updated first post with official pages from twrp.me, but since the builds are not up yet, i posted latest test builds in post #2.
Regards

well done sir

Hello! I have a rooted sm-n980f exynos European version. I rooted my phone using magisk patched AP file through odin. I am trying to flash twrp 3.6.1 above and vbmeta.tar using odin but it fails. What shall I do? Thank you!

edsoedso said:
Hello! I have a rooted sm-n980f exynos European version. I rooted my phone using magisk patched AP file through odin. I am trying to flash twrp 3.6.1 above and vbmeta.tar using odin but it fails. What shall I do? Thank you!
Click to expand...
Click to collapse
Can you attach a screenshot of Odin and eventually tell me if you see anything in particular changing on phone screen? It should throw an error or something below the usual download mode lines. A pic of phone screen would be nice but i'd assume it's your only phone..
Regards

corsicanu said:
Can you attach a screenshot of Odin and eventually tell me if you see anything in particular changing on phone screen? It should throw an error or something below the usual download mode lines. A pic of phone screen would be nice but i'd assume it's your only phone..
Regards
Click to expand...
Click to collapse
Nothing changes in the screen phone. Attached is odin screen. Thank you!

edsoedso said:
Nothing changes in the screen phone. Attached is odin screen. Thank you!
Click to expand...
Click to collapse
Can you please check Kg state line from download mode? What's written there?

corsicanu said:
Can you please check Kg state line from download mode? What's written there?
Click to expand...
Click to collapse
I installed twrp but it seems that it does not read the internal storage.

corsicanu said:
Can you please check Kg state line from download mode? What's written there?
Click to expand...
Click to collapse
And how to flash the multidisabler? it seems that everything is encrypted and is impossible to locate it in twrp?

I found it!
1. enter into TWRP (after flashing twrp.tar and Vbmeta.tar via odin), format data and reboot again in TWRP
2. Being in TWRP, transfer from PC to your phone multidisabler.zip and magisk zip.
3. flash them both
4. reboot system
That is all!

i have note 20 5G N918B , i make every thing but my mobile keep restarting in to TWRP recovery , not going to system

Hello! What can be done to remove encryption from TWRP? I have flashed disabler but it still continues to encrypt. I tried formatting data from twrp, changing file system to EXT4 and back to EXT2 but with no result so far. any help?

m7mdo_93 said:
i have note 20 5G N918B , i make every thing but my mobile keep restarting in to TWRP recovery , not going to system
Click to expand...
Click to collapse
edsoedso said:
Hello! What can be done to remove encryption from TWRP? I have flashed disabler but it still continues to encrypt. I tried formatting data from twrp, changing file system to EXT4 and back to EXT2 but with no result so far. any help?
Click to expand...
Click to collapse
I'm still trying to find the issue, for whatever reason multidisabler needs a second flash to work as far as i seen on my device. So for now please flash multidisabler 2 times in a row, until i find a better solution to this.
Regards

corsicanu said:
I'm still trying to find the issue, for whatever reason multidisabler needs a second flash to work as far as i seen on my device. So for now please flash multidisabler 2 times in a row, until i find a better solution to this.
Regards
Click to expand...
Click to collapse
yeah , after flashing multidisabler second time my mobile able to working .. thanks for your help

corsicanu said:
I'm still trying to find the issue, for whatever reason multidisabler needs a second flash to work as far as i seen on my device. So for now please flash multidisabler 2 times in a row, until i find a better solution to this.
Regards
Click to expand...
Click to collapse
Thank You very much. It worked!

A big thank you, it works fine.

hey.
i did everything from this guide, and i got root access+twrp installed.
the problem that i am facing, is that i canot install anything from twrp, due to insufficient space.
the system size that twrp is reading is only 8384kb, so every installation of gapps is failed.
i tried to wipe ,format data, and changing the file system, but nothing helped.
please give me an idea how to solve it.
thanks.

Good day
Does this work for Android 13 One UI 5.1?

[RECOVERY][3.6.2_12][TOCO][UNOFFICIAL] Stable TWRP for Android 13 AOSP Roms

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our own features. It's a fully touch-driven user interface, with no more volume rocker or power buttons to mash. The GUI is also fully XML-driven and completely theme-able. You can change just about every aspect of the look and feel.
Key Features:​
Touchscreen-driven with real buttons and drag-to-scroll
XML-based GUI that allows full customization of the layout and true theming!
Settings are saved to the sdcard and persist through reboots
Ability to choose which partitions to back up and which to restore
Ability to choose to compress backups now with pigz (multi-core processor support for faster compression times)
Onscreen keyboard
Easy selection of internal/external storage
In addition to the above new features, TWRP features a scripting engine that allows an app to send commands to the recovery for the recovery to perform during startup. We call this scripting engine OpenRecoveryScript. This engine will be put to use immediately in the GooManager app. GooManager will be able to install recoveries automatically for most supported devices. The app will also let you choose to install multiple zips from within Android, wipe, and run a backup.
Source Code:​GitHub: https://github.com/TeamWin/android_bootable_recovery
Gerrit Instance: http://gerrit.twrp.me
Hello, this is TWRP, for Xiaomi Mi Note 10 Lite (toco)​
Touch and ADB work
Sideload
Fastbootd
MTP
USB OTG is working
Decryption is supported for A13 Roms
Send me a beer: PayPal​
Kernel source: https://bigota.d.miui.com/V13.0.2.0.SFNMIXM/miui_TOCOGlobal_V13.0.2.0.SFNMIXM_d23ee670ca_12.0.zip
Telegram group: https://t.me/ahq254chat
Download​https://bit.ly/twrp-A13-toco
Installation​Prerequisites: ADB & Fastboot platform-tools
1. Download the recovery from the link above
2. Boot your device into bootloader mode (Power + Volume Up)
3. Open a command window in the folder containing the downloaded recovery
4. Type the following command and hit Enter
fastboot flash recovery twrp-3.6.2_12-A13-toco.img
Click to expand...
Click to collapse
5. Type this command and hit Enter to boot into recovery
fastboot reboot recovery
Click to expand...
Click to collapse
6. Confirm successful installation when you boot into the new TWRP

Hello, thanks for the hard work on TWRP for this device.
I am experiencing a problem in order to copy files on my device from TWRP using the mount option, it seems that there is a problem because the files won't copy, even creating new folders won't work, did I do something wrong?

Idaho1911 said:
Hello, thanks for the hard work on TWRP for this device.
I am experiencing a problem in order to copy files on my device from TWRP using the mount option, it seems that there is a problem because the files won't copy, even creating new folders won't work, did I do something wrong?
Click to expand...
Click to collapse
I hope you have data decryption working. If not so, you did not do the correct steps. When installing the rom, make sure you format DATA using the recovery for the first-time installation

hey im trying to install the recovery using adb fastboot and every time i either try to boot into it ore flash it i see the twrp screen then it reboots into the os ,any advice on what i might be doing wrong?
Edit: i tried to boot into an older version of twrp to try to flash the new onw from there , it asked for a passsword so i went and just disabled my pin and tried to boot just too see what hapens into the a13 version and that time it actually botted up without crashing. So i think the problem was the model and now its working

Any plans to port TWRP 3.7.0 (Android 12.1 branch)?
This new version finally supports Android 12 decryption.

devnoname120 said:
Any plans to port TWRP 3.7.0 (Android 12.1 branch)?
This new version finally supports Android 12 decryption.
Click to expand...
Click to collapse
It is already available on my blog. Will be updated here later

Fox_it3 said:
hey im trying to install the recovery using adb fastboot and every time i either try to boot into it ore flash it i see the twrp screen then it reboots into the os ,any advice on what i might be doing wrong?
Edit: i tried to boot into an older version of twrp to try to flash the new onw from there , it asked for a passsword so i went and just disabled my pin and tried to boot just too see what hapens into the a13 version and that time it actually botted up without crashing. So i think the problem was the model and now its working
Click to expand...
Click to collapse
Glad you have it working

AndroidHQ254 said:
It is already available on my blog. Will be updated here later
Click to expand...
Click to collapse
Thanks! For future travelers, here is the TWRP update with working Android 12 filesystem decryption: https://androidhq254.blogspot.com/2022/06/twrp-recovery-for-minote10lite.html

devnoname120 said:
Thanks! For future travelers, here is the TWRP update with working Android 12 filesystem decryption: https://androidhq254.blogspot.com/2022/06/twrp-recovery-for-minote10lite.html
Click to expand...
Click to collapse
You found it. Great! The blog is more updated compared to xda

AndroidHQ254 said:
Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our own features. It's a fully touch-driven user interface, with no more volume rocker or power buttons to mash. The GUI is also fully XML-driven and completely theme-able. You can change just about every aspect of the look and feel.
Key Features:​
Touchscreen-driven with real buttons and drag-to-scroll
XML-based GUI that allows full customization of the layout and true theming!
Settings are saved to the sdcard and persist through reboots
Ability to choose which partitions to back up and which to restore
Ability to choose to compress backups now with pigz (multi-core processor support for faster compression times)
Onscreen keyboard
Easy selection of internal/external storage
In addition to the above new features, TWRP features a scripting engine that allows an app to send commands to the recovery for the recovery to perform during startup. We call this scripting engine OpenRecoveryScript. This engine will be put to use immediately in the GooManager app. GooManager will be able to install recoveries automatically for most supported devices. The app will also let you choose to install multiple zips from within Android, wipe, and run a backup.
Source Code:​GitHub: https://github.com/TeamWin/android_bootable_recovery
Gerrit Instance: http://gerrit.twrp.me
Hello, this is TWRP, for Xiaomi Mi Note 10 Lite (toco)​
Touch and ADB work
Sideload
Fastbootd
MTP
USB OTG is working
Decryption is supported for A13 Roms
Send me a beer: PayPal​
Kernel source: https://bigota.d.miui.com/V13.0.2.0.SFNMIXM/miui_TOCOGlobal_V13.0.2.0.SFNMIXM_d23ee670ca_12.0.zip
Telegram group: https://t.me/ahq254chat
Download​https://bit.ly/twrp-A13-toco
Installation​Prerequisites: ADB & Fastboot platform-tools
1. Download the recovery from the link above
2. Boot your device into bootloader mode (Power + Volume Up)
3. Open a command window in the folder containing the downloaded recovery
4. Type the following command and hit Enter
5. Type this command and hit Enter to boot into recovery
6. Confirm successful installation when you boot into the new TWRP
Click to expand...
Click to collapse
Thanks. Decryption working perfect.

Trying to follow the install procedure, but the fastboot part is never ending.
Note: the fastboot mode keys are Power + Volume Down.
Can you advice please?
Is there an alternative way to install TWRP on our device?
Regards,
Tyrell66

I am having an issue. I wiped Data, Cache and Dalvik, but when I try to copy files from my computer it says the device stopped responding or disconnected. Now I won't be able to use my phone.

AndroidHQ254​update this thread when you have time please!
Thank's for your hard work and dedication to give life on this mobile!