Black screen in Xiaomi MI A1. Cannot reboot, power button non responsive. - Xiaomi Mi A1 Questions & Answers

Hi all
Just received this phone a few days ago and all it went fine, but last night phone screen went black, and only sign of life i can see the white led in the left top corner blinking when i push power button.
I´ve tried to reboot pushing the power button from 10seconds and release, till 60 seconds but it doesn´t reboot. I´ve searched for a user manual on this terminal, but couldn´t find it on the web.
Does anyone how i can reboot this phone in this case? No display working and no response in pushing power button for a while? Is there a reboot button somewhere in the phone?
It´s kind of frustrating, in my old samsung i just pulled the battery out easy when gets blocked.
Thanks and regards.

Hold Power and Volume up, the phone should vibrate after some time and you should see the boot screen.

this happened to me just 10 min ago, my phone was working perfectly the last 3 weeks. Now it looks dead, does not make any sound, i cannot reboot it. Only the ambient light blinks when i push the power button or when i charge it. It is not responding to anything, what happened and how can i fix it?

My device has shut down, only the led flashes when I press power or connect to the charger
Como solucionar isso ?

Open the phone's back cover and reconnect the battery connector, this will work I had the same problem.

tajamulbaba said:
Open the phone's back cover and reconnect the battery connector, this will work I had the same problem.
Click to expand...
Click to collapse
Ich have the Same and this solution dont Work for me.
So this is Not The solution for everyone.
Gesendet von meinem Mi A1 mit Tapatalk

hydromän said:
Ich have the Same and this solution dont Work for me.
So this is Not The solution for everyone.
Gesendet von meinem Mi A1 mit Tapatalk
Click to expand...
Click to collapse
He can at least try this.

Hi ,
The same thing happened to me , I put phone on charging over night and in morning , the same thing was happening - black screen , and only led was blinking when I was pressing any of the power / volume rockers. In my case , it was the faulty socket on which I charged on , the phone was never actually charging and since LED was blinking , it gave me an illusion that phone was charging. I plugged it in different socket , and voila! it booted up in 5 mins. Hope it helps !

my a1 is trying to turn on because its vibrating but the screen is still black, when i try to turn it on it keeps vibrating.
please help

If you put an SD card, try removing it and restarting the cell phone. The same thing happened to me and it was because the SD was damaged. I put a new one and it started working
Si le pusiste una tarjeta SD, probá sacarla y reiniciar el celular. A mí me pasaba lo mismo y era porque la SD estaba dañada. Puse una nueva y empezó a funcionar

Cómo lo solucionaste?
How did you solve it?

Does holding power button + volume down get u into bootloader?

I have the same problem, my Mi A1 dont boot and i cant open fastboot mode (and screen dont turn on when charging)

Hi.
I have experienced the same thing before, where the phone looks dead, power button not working with only blinking led light. In my case, it is actually because the phone had no battery. I charged the phone for about 30 mins then the phone boots up normaly by long pressing the power button
Hope this helps you.

same problem but it vibrates in every 3-5 seconds its just vibrates and black screen i tryed everything volume up and power button and volume down power button it does nothing

nickag said:
same problem but it vibrates in every 3-5 seconds its just vibrates and black screen i tryed everything volume up and power button and volume down power button it does nothing
Click to expand...
Click to collapse
Any solution
I found this tutorial but the file 3- download this file, and extract the files, you will find * TWRP * folder is off

Related

S4 keeps turning off after a few seconds

hey!
I own a Samsung Galaxy S4. Since today I cant boot the phone up anymore!!!
while watching youtube videos it sudddenly was dead, I didn`t even drop it. turning on again with the power button doesnt work, advanced boot with power button + other button doesnt work as well. only if I reinsert the battery the phone vibrates and it turns on for about 2-3 seconds, the samsun bootloader logo appears and its dead again. I have already replaced the battery with a working one, doesnt work. I removed the sd and simcard but that did not help.
Sounds a lot like a power button problem.
The exact problem is that the button is stuck or shorted, which causes the circuit to be constantly closed. In other words, it's always "pressed".

LeEco Pro 3 Hardbrick

Looks like my phone is Hardbricked. It won't turn on, boot in fastboot or even in recovery. It looks like it's dead. Is there any way to fix that "hardbrick" or is my phone useless now? :crying:
what happ ?
may the battery empty ?
and ur cable useless ?
My phone is brick, because i turned off it on 12% and it won't turn on again. Red Led after connect <broken> original cable. In a few days, new cable will come to me and I'll try to reanimation my phone. But on Le forum or bug report told, that bricked phone woke up after connect original cable and original charger only <tried few another> (Blitzwolf comes to me). How is your problem? Did you read about it?
Original cable is crap.try another good cable.it should work
Inviato dal mio ASUS_Z00A utilizzando Tapatalk
SOLVED
Holding the power button and volume down buttons down, while holding the proximity sensor directly under a very bright light helped me.
willyz17 said:
Holding the power button and volume down buttons down, while holding the proximity sensor directly under a very bright light helped me.
Click to expand...
Click to collapse
Thnx for sharing with us

Blackscreen and frozen LED light.

I wasn't doing anything out of the ordinary - just watching some YouTube videos and attempted to turn on my Bluetooth to connect my bluetooth speaker, all of a sudden the phone froze and then it went to a blackscreen and the blue LED was stuck on, now the LED has changed to white yet the condition is the same - blackscreen and doesn't respond to any button presses. Is there any way to force restart this phone via computer? It's my only phone right now and it's detrimental that I get it working as soon as possible.
Note: I have no custom firmware or ROMs, I use the default of what's with the phone.
Thanks in advance,
Tyrone.
Try every button press combination for 1-2 minutes (Only the power button, Vol-Down and power button or all at the same time). To see if you can get it to hard reset or go into fastboot.
Apart from that, there shouldn't be much else to do, apart from waiting until the battery drains out or something.
Sent from my LeEco LEX722 using XDA Labs

Phone wont turn on red light stays on all the time

I looked at the forums and all over google today for more than 6 hours trying to fix the phone to no avail. Basicly what happened, my phone froze after was droped and after restarting throu power button it got stuck on boot loop. So i dowloaded Huawei P9 Lite VNS-L31 model firmware and tried to instal throu SD card with volume up/down and power button option. It didnt work i got error message saying that it cant update becouse software doesnt comply with this version. And after that my phone went down. It is now completely unresponsive. Screen is black and a red light is on all the time ( not flashing ). Put it in charger no images appear. Try to press power button for 10 seconds. Red lamp dissappears for a second and comes back and no response from the phone, screen still black and no vibrations or sounds. Can access any of volume down or up power button menus. Its like the phone is dead but only the red lamp is on. Any idead whats wrong with the phone? Now i cant even try to wipe the phone or install new software couse it just doesnt despond only the red light turns off for a second when holding the power button for some time and comes on and no response from the phone.
Hey, I have the same problem. Did you manage to find the solution to it?

ZTE Blade Spark does not turn on

My ZTE Blade Spark was working fine and randomly just turned off and blackscreened. I pressed the power button to turn it back on and just started vibrating every second or so? I was using the beta Google Messenger and was sending a text right before this happened if that helps
I've tried a soft reset as well as holding the power and volume buttons in all configurations, the buttons do not glow any color. I've also tried unplugging the battery and plugging it back in, but the vibrating simply starts again when the cover is back on.
I don't know why its doing this and I need some help
Thanks

Categories

Resources