SM-T350 BOOTLOOP Please Help! - Samsung Galaxy Tab A series Questions & Answers

hey guys so im on stock 7.1.1 and after a bit the tablet crashs but doesnt crash when pluged in directly into a power source. when im not charging it it crashes and goes into a bootloop i downloaded odin and re flashed its origial tar file i believe and im still having this issue please can anyone help? this is very frustrating

hennykenny said:
hey guys so im on stock 7.1.1 and after a bit the tablet crashs but doesnt crash when pluged in directly into a power source. when im not charging it it crashes and goes into a bootloop i downloaded odin and re flashed its origial tar file i believe and im still having this issue please can anyone help? this is very frustrating
Click to expand...
Click to collapse
Loose battery connector. Whip the back off and check they are secure. Tape down if necessary.

Related

desperate help finding the right stock rom please.

My phone just suddenly stopped working earlier today.it was running the latest omega rom with the latest modem and boot loader. ...
I cant get into recovery either. When I try it just reboots and goes to the samsung boot screen.my phone is a sim free insurance replacement and im not sure what stock rom to flash...
Could some nice soul just tell me the exact rom thats needed.
Its a uk based I9505 .
Please some one help as im away from home atm and have no way of contacting anyone.i have laptop and a dongle so can at least download and flash.
What ever has happened has corrupted it somehow.
I can still get into download mode how ever.
Id be eternally grateful if there is some nice soul to.help me
Just download and flash this with the latest Odin. Boot in download mode.
http://www.sammobile.com/firmwares/3/?download=33356
This is the latest German FW that Omega is based. It has the "OXA" Multi-CSC, which also includes BTU (United Kingdom)
After flash you will not have any problem retrieving all your data, as long as you don't factory reset.
iJo09 said:
Just download and flash this with the latest Odin. Boot in download mode.
http://www.sammobile.com/firmwares/3/?download=33356
This is the latest German FW that Omega is based. It has the "OXA" Multi-CSC, which also includes BTU (United Kingdom)
After flash you will not have any problem retrieving all your data, as long as you don't factory reset.
Click to expand...
Click to collapse
thanks ill try that buddy i really hope it works....
im getting worried that its really broken,,,,,,
ill have to wait till tomorrow when i have wifi
i only have a broad band dongle here so are there any other ideas if after flashing this it just sits at the sumsung screen?
cheers
Gavin01 said:
thanks ill try that buddy i really hope it works....
im getting worried that its really broken,,,,,,
ill have to wait till tomorrow when i have wifi
Click to expand...
Click to collapse
No problem man
Gavin01 said:
i only have a broad band dongle here so are there any other ideas if after flashing this it just sits at the sumsung screen?
cheers
Click to expand...
Click to collapse
If it remains on the Samsung boot logo, then try to flash the same firmware with the .pit file and "Re-Partition" flag checked in Odin.
If still doesn't boot, then you have to enter recovery mode to wipe data/factory reset the device
iJo09 said:
No problem man
If it remains on the Samsung boot logo, then try to flash the same firmware with the .pit file and "Re-Partition" flag checked in Odin.
If still doesn't boot, then you have to enter recovery mode to wipe data/factory reset the device
Click to expand...
Click to collapse
where do i find a .pit file? i have a feeling thats what ill have to do as i cant get into recovery
Gavin01 said:
where do i find a .pit file? i have a feeling thats what ill have to do as i cant get into recovery
Click to expand...
Click to collapse
Hi,
Here you go.....
http://forum.xda-developers.com/showthread.php?t=2265477
MAX 404 said:
Hi,
Here you go.....
http://forum.xda-developers.com/showthread.php?t=2265477
Click to expand...
Click to collapse
mate your being brilliant! downloaded the firmware which took hours lol over a mobile connection.
phone just restarts and the sits at the samsung screen with the blue light flashing...
cant get into recovery either........
how do i go about using this pit file ive never done it?
thanks again
sorry i cant see a pit file there to download?
edit found it!
iJo09 said:
No problem man
If it remains on the Samsung boot logo, then try to flash the same firmware with the .pit file and "Re-Partition" flag checked in Odin.
If still doesn't boot, then you have to enter recovery mode to wipe data/factory reset the device
Click to expand...
Click to collapse
unfortunately it still just sits at the sumsung screen with blue light flashing.....
ive left it for over 10 minutes and nothing and i still cant get into recovery....
it was working fine and all i did was download a couple of apps and then it went nuts and then wouldnt boot.
do you have any more ideas my friend?
im so desperate for this to work. im on vacation and have no phone to use for taking photos or facebook
managed to get into recovery....................
i had to hold down volume up for recovery it said it was booting into recovery then it rebooted and i had to quickly push the up button again and repeated the process a few times.
did a factory reset and i now have a basic system again! yay! although the phone is getting hot??
might just be being paranoid but i can feel the heat from it through my trousers lol
Gavin01 said:
managed to get into recovery....................
i had to hold down volume up for recovery it said it was booting into recovery then it rebooted and i had to quickly push the up button again and repeated the process a few times.
did a factory reset and i now have a basic system again! yay! although the phone is getting hot??
might just be being paranoid but i can feel the heat from it through my trousers lol
Click to expand...
Click to collapse
Glad you made it mate,
Use an app like BBS to see who is running wild an making phone go hot
http://forum.xda-developers.com/showthread.php?t=1179809
MAX 404 said:
Glad you made it mate,
Use an app like BBS to see who is running wild an making phone go hot
http://forum.xda-developers.com/showthread.php?t=1179809
Click to expand...
Click to collapse
I really appreciate ......your help......leaving it as stock for the moment after that close shave....maybe just root
Gavin01 said:
I really appreciate ......your help......leaving it as stock for the moment after that close shave....maybe just root
Click to expand...
Click to collapse
I get it mate.
might just root it and go for a new launcher
right im getting this issue again so i think i need to flash everything back to stock again and go from there.
How do i know which is the exact correct latest rom from my internation i9505....thanks people.
phone is almost getting so hot its dangerous!
If anyone can point me in the right direction id be eternally grateful.
Or even a older one than i could then OTA update?

[Q] ODIN stuck at Initialization step

hi all.. im a beginner at installing custom roms.. i own a Samsung Galaxy S4 i9500.. a few days ago, i updated it to CyanogenMod c-11 (kitkat 4.4.4 based) ROM, then to CyanogenMod c-12 (lollipop based) ROM, so try out its new features.. however, since yesterday, my phone is not booting up.. neither is it able to go into recovery mode.. (the boot logo displays endless).. i can only go into the download mode..
so i downloaded ODIN.. and tried flashing I9500XXUFNI2_I9500ODDFNI1_INS.zip onto it.. however, no matter what i do (removing battery, restarting PC, restarting ODIN), i cannot go past the "initialization" step.. no matter which ROM i try, it never goes past the "initialization" step.. please help..
awesim said:
hi all.. im a beginner at installing custom roms.. i own a Samsung Galaxy S4 i9500.. a few days ago, i updated it to CyanogenMod c-11 (kitkat 4.4.4 based) ROM, then to CyanogenMod c-12 (lollipop based) ROM, so try out its new features.. however, since yesterday, my phone is not booting up.. neither is it able to go into recovery mode.. (the boot logo displays endless).. i can only go into the download mode..
so i downloaded ODIN.. and tried flashing I9500XXUFNI2_I9500ODDFNI1_INS.zip onto it.. however, no matter what i do (removing battery, restarting PC, restarting ODIN), i cannot go past the "initialization" step.. no matter which ROM i try, it never goes past the "initialization" step.. please help..
Click to expand...
Click to collapse
Did you try to unzip the stock ROM to receive the .tar file for ODIN?
Joku1981 said:
Did you try to unzip the stock ROM to receive the .tar file for ODIN?
Click to expand...
Click to collapse
yes i did.. the .zip file contains two files:
- SS_DL.dll
- I9500XXUFNI2_I9500ODDFNI1_INS.tar.md5
according to instructions in different online threads, im putting this .tar.md5 in the PDA/AP slot..
awesim said:
yes i did.. the .zip file contains two files:
- SS_DL.dll
- I9500XXUFNI2_I9500ODDFNI1_INS.tar.md5
according to instructions in different online threads, im putting this .tar.md5 in the PDA/AP slot..
Click to expand...
Click to collapse
Change USB cable/port, other pc or close Kies 3 on the task bar.
It sounds more like a hardware failure.
Joku1981 said:
Change USB cable/port, other pc or close Kies 3 on the task bar.
Click to expand...
Click to collapse
Ive already tried changing USB ports.. I dont have Kies installed in the first place.. I'll try repeating the procedure on a different system though..
i certainly hope it is not a hardware failure.. i literally slept with the phone on charge and woke up to a dead phone.. the phone boots up into the bootloop.. the recovery mode ends in the bootloop as well.. only the download mode ends up in the correct "downloading.. do no turn off target" screen.. and odin detects the phone just fine.. but upgrading any firmware via odin gets stuck on the "initialization" step.. i can answer more questions if required.. at this point i dont care which ROM works for my phone.. or if i lose data.. i just wanna revive my phone..
awesim said:
i certainly hope it is not a hardware failure.. i literally slept with the phone on charge and woke up to a dead phone.. the phone boots up into the bootloop.. the recovery mode ends in the bootloop as well.. only the download mode ends up in the correct "downloading.. do no turn off target" screen.. and odin detects the phone just fine.. but upgrading any firmware via odin gets stuck on the "initialization" step.. i can answer more questions if required.. at this point i dont care which ROM works for my phone.. or if i lose data.. i just wanna revive my phone..
Click to expand...
Click to collapse
did you solve your problem?
jkamz said:
did you solve your problem?
Click to expand...
Click to collapse
I am also facing the same problem. Were you able to solve it.
no
Buy another motherboard.that solved my problem.There is no other work around
I'm also facing same issue
Bro's, gotta start somewhere, right!
The fact that you're phones are boot looping is actually a good sign - it means that they're not totally useless but salvageable.
Question: Are you able to boot into your custom recoveries, e.g. TWRP? If yes, please reply.
If no, kindly uninstall your old samsung driver, reboot pc, install new driver, put your phone into "Download mode", connect phone to pc, run Odin & hope for the best! If you can get passed this step, then it's smooth sailing...
jkamz said:
no
Click to expand...
Click to collapse
I'm having this issue with mine today, anyone able to resolve this without going true warranty?
Is the phone recognized by Odin? Post a screenshot of the Odin error or post the Odin error.
audit13 said:
Is the phone recognized by Odin? Post a screenshot of the Odin error or post the Odin error.
Click to expand...
Click to collapse
i'm facing the same problem with mine,any Fix??need help guys:crying::crying:
Odin is not working because the phone was not assigned a com port.
audit13 said:
Odin is not working because the phone was not assigned a com port.
Click to expand...
Click to collapse
He is right should be blue in com port is it latest Odin 10.7
Sent from my SM-A720F using Tapatalk
The obligatory obvious question here. Do you have the Samsung driver installed?
Just repartition the eMMC chip using .pit file with odin that it is suitable for galaxy S4 i9500.
If anyone has tried, please tell us, that it is work or not.
http://www.droidviews.com/how-to-unbrick-your-bricked-samsung-galaxy-s4-gt-i9500-gt-i9505/
Thanks!

551ml Bricked after updating to new offical MM build. (help pls)

Hello guys, I noticed this morning that MM was officially released today. I followed the steps on to update my phone. I downloaded the rom for 551ml put it on my root of my internal storage, after that a pop up showed that there was a system update. I did the update and now my phone wont turn on now. It vibes twice and nothing comes on the screen. I have no idea how to fix it. I was on the latest firmware that system update would give me (184). If someone isn't busy could they possibly help me out. thx..
Same issue here, have you found a solution yet?
arturocr said:
Same issue here, have you found a solution yet?
Click to expand...
Click to collapse
tyring a guide atm but links seem to be outdated. I managed to get in fastboot or whatever its called when you can boot in to recovery. but from there I cant do anything.
You cant get into recovery after fastboot?
Sent from my ASUS_Z00AD using XDA Premium HD app
same problem ,
so im from cm 13 lastest build , and then i wipe data from twrp , after that i directly flash MM offical rom and its done without any problem. the problem start after i reboot system. my phone just vibrating twice with no lights led on , no screen on , no asus logo , can't go to recovery nor fastboot just keep restarting i guess because after a couple minute it vibrate again.
when i charge it wont show charging battrey , only stuck at battrey logo with zap with no charging animation.
don't have any clue. can anyone help ?
try to connect to pc but only show "moorefield" with (?).
sorry for my bad english.
Same for me...
baonxxx said:
same problem ,
so im from cm 13 lastest build , and then i wipe data from twrp , after that i directly flash MM offical rom and its done without any problem. the problem start after i reboot system. my phone just vibrating twice with no lights led on , no screen on , no asus logo , can't go to recovery nor fastboot just keep restarting i guess because after a couple minute it vibrate again.
when i charge it wont show charging battrey , only stuck at battrey logo with zap with no charging animation.
don't have any clue. can anyone help ?
try to connect to pc but only show "moorefield" with (?).
sorry for my bad english.
Click to expand...
Click to collapse
I think mm system.img boot.img splashcreen.img need mm bootloder to run and at the moment twrp doesnt work with it, if you install mm via twrp you only updating these img and bootloader still lp that causes your phone cant boot. (Correct me if im wrong)
So now you need xfstk downloader to recover your fastboot and then flash .194 raw firmware using asus flash tool then adb sideload mm firmware from stock .194 recovery, theres guide how to do that in here but im forget where
Sorry my english are bad too..
miku1024 said:
I think mm system.img boot.img splashcreen.img need mm bootloder to run and at the moment twrp doesnt work with it, if you install mm via twrp you only updating these img and bootloader still lp that causes your phone cant boot. (Correct me if im wrong)
So now you need xfstk downloader to recover your fastboot and then flash .194 raw firmware using asus flash tool then adb sideload mm firmware from stock .194 recovery, theres guide how to to that in here but im forget where
Sorry my english are bad too..
Click to expand...
Click to collapse
how does make xfstk work ? don't have idea how. it just show nothing after i open xfstk , have a reference link ?
baonxxx said:
same problem ,
so im from cm 13 lastest build , and then i wipe data from twrp , after that i directly flash MM offical rom and its done without any problem. the problem start after i reboot system. my phone just vibrating twice with no lights led on , no screen on , no asus logo , can't go to recovery nor fastboot just keep restarting i guess because after a couple minute it vibrate again.
when i charge it wont show charging battrey , only stuck at battrey logo with zap with no charging animation.
don't have any clue. can anyone help ?
try to connect to pc but only show "moorefield" with (?).
sorry for my bad english.
Click to expand...
Click to collapse
baonxxx said:
how does make xfstk work ? don't have idea how. it just show nothing after i open xfstk , have a reference link ?
Click to expand...
Click to collapse
I found the link!
You need You need asus usb and intel soc drivers
Heres
http://forum.xda-developers.com/zenfone2/general/guide-fix-bricked-ze550ml-ze551ml-usb-t3405840
Try this: http://forum.xda-developers.com/zenfone2/general/guide-how-to-update-to-official-mm-t3452082
miku1024 said:
I think mm system.img boot.img splashcreen.img need mm bootloder to run and at the moment twrp doesnt work with it, if you install mm via twrp you only updating these img and bootloader still lp that causes your phone cant boot. (Correct me if im wrong)
So now you need xfstk downloader to recover your fastboot and then flash .194 raw firmware using asus flash tool then adb sideload mm firmware from stock .194 recovery, theres guide how to do that in here but im forget where
Sorry my english are bad too..
Click to expand...
Click to collapse
I used XFSTK to upload firmware etc... but after upload firmware, the phone will vibrate twice and download of OS will not start... the soft will try 20 attemps to connect with the phone and the OS part can't be download on the phone... I'm stick at this point.
Hello guys, i'm trying to unbrick my phone, i'm following this guide http://forum.xda-developers.com/zenf...l-usb-t3405840 but when i get to the end of te install of intelSoC my device is detected as Moorefield for like 4-5 seconds and then it disappears. I've been trying to solve this for like 4 hours now, a little help would be much appreciated.
quarterbreed said:
tyring a guide atm but links seem to be outdated. I managed to get in fastboot or whatever its called when you can boot in to recovery. but from there I cant do anything.
Click to expand...
Click to collapse
try this if you unable to flash
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
sukhwant717 said:
try this if you unable to flash
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
Click to expand...
Click to collapse
I did this morning and it worked. Im on 6.0.1 now, I guess the cause of my brick was that I had TWRP installed. Now I know next time to remove it before updating lol.
quarterbreed said:
I did this morning and it worked. Im on 6.0.1 now, I guess the cause of my brick was that I had TWRP installed. Now I know next time to remove it before updating lol.
Click to expand...
Click to collapse
glad to know that it worked. but sad to know that despite that you didn't hit thanks
quarterbreed said:
I did this morning and it worked. Im on 6.0.1 now, I guess the cause of my brick was that I had TWRP installed. Now I know next time to remove it before updating lol.
Click to expand...
Click to collapse
If you don't need to use twrp everyday (maybe just a backup from time to time) you'd better keep stock recovery and whenever you need something from twrp, you just boot into it without flashing with the usual "fastboot boot twrp.img" command. That way if you ever upgrade again you don't have to remember whether you removed twrp before. But that's just an opinion, since if done that way, you'd need to have yor phione hooked to a computer to get into twrp, an that's not always possible.
thanks
quarterbreed said:
I did this morning and it worked. Im on 6.0.1 now, I guess the cause of my brick was that I had TWRP installed. Now I know next time to remove it before updating lol.
Click to expand...
Click to collapse
sukhwant717 said:
try this if you unable to flash
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
Click to expand...
Click to collapse
that link saved my phone, thanks man
sukhwant717 said:
glad to know that it worked. but sad to know that despite that you didn't hit thanks
Click to expand...
Click to collapse
I just hit thanks now, I was at my limit of 8 at the time.

[HELP!] Stuck in "RECOVERY BOOTING.." Bootloop - N910F

Hello guys, thank you for helping!
I have a N910F that was working on a Lineage OS 14 ROM, I've decided to downgrade it to Marshmallow (It was Nougat) Stock ROM, I did that on Odin and wiped the user data and everything was working fine..
until one day the phone got back on 0% of battery and it just wouldn't boot normally, it was stuck in bootloop, I went and downloaded a Lollipop firmware(Because the MM ROM was deleted) and I flashed the ROM via Odin, and now the phone is stuck in "Recovery Booting..." maybe each boot is like 3 seconds or 2
Please help
Any help guys ^^?
TheDon772 said:
Any help guys ^^?
Click to expand...
Click to collapse
Here's a link to the latest sm-n910f from updato.com. Maybe the 910f can't be downgraded from MM to Lp.
It's this firmware:
GALAXY Note 4 SM-N910F 6.0.1 MAY 25, 18
United Kingdom (EE) (EVR)
N910FXXU1DRD1
Edit- Link is broken, please go to updato.com for firmware.
kevintm78 said:
Here's a link to the latest sm-n910f from updato.com. Maybe the 910f can't be downgraded from MM to Lp.
It's this firmware:
GALAXY Note 4 SM-N910F 6.0.1 MAY 25, 18
United Kingdom (EE) (EVR)
N910FXXU1DRD1
Click to expand...
Click to collapse
It says Hotlinking is not cool xD
-EDIT- Found it ^^
Do I flash it normally in Odin now?? Just boot the phone in Download mode and put the ROM in Odin and start flashing?
TheDon772 said:
It says Hotlinking is not cool xD
-EDIT- Found it ^^
Do I flash it normally in Odin now?? Just boot the phone in Download mode and put the ROM in Odin and start flashing?
Click to expand...
Click to collapse
Oh, I see that hotlinking message now. Lol, I had tested the link but was worried something like that would happen. I updated the other post just in case anyone else is looking.
Yeah, just unzip it and flash through Odin.
I have a N910T, but perhaps someone in the thread I link to will be able to advise if this can help you as well.
This is the only method that helped my Note recover from the recovery bootloop, constant random reboot etc. To be honest, Fire Kat v21 is actually pretty good....very fast and nearly all of my apps still work on Android 4.4.4.
https://forum.xda-developers.com/no...ws-want-to-downgrade-to-4-4-4-kitkat-t3447773
Sent from my SM-N910T using Tapatalk
taadow1030 said:
I have a N910T, but perhaps someone in the thread I link to will be able to advise if this can help you as well.
This is the only method that helped my Note recover from the recovery bootloop, constant random reboot etc. To be honest, Fire Kat v21 is actually pretty good....very fast and nearly all of my apps still work on Android 4.4.4.
https://forum.xda-developers.com/no...ws-want-to-downgrade-to-4-4-4-kitkat-t3447773
Sent from my SM-N910T using Tapatalk
Click to expand...
Click to collapse
Appreciate for replying and helping out bro! But I cannot boot into the reocvery at all
kevintm78 said:
Oh, I see that hotlinking message now. Lol, I had tested the link but was worried something like that would happen. I updated the other post just in case anyone else is looking.
Yeah, just unzip it and flash through Odin.
Click to expand...
Click to collapse
Ty bro! I did what you said but the same problem persists (((( this is my daily driver phone idk what to do rip ;-;
TheDon772 said:
Ty bro! I did what you said but the same problem persists (((( this is my daily driver phone idk what to do rip ;-;
Click to expand...
Click to collapse
I've got similar problems. Even Odin flash didn't brought the device further. My battery was completely dead so I supplied with an external powersupply (around 3.9V).
That also doesn't work. I needed to add 2.4kOhm resistor between battery GND clip and thermistor clip to fake the non existing thermistor.
If you've got some electrical equipment at home give it a try. It worked for me.
Else you can try a new battery.
Besides that reboots occured after that again. Now I'm going to test the famous Wakelock app https://play.google.com/store/apps/details?id=eu.thedarken.wl&hl=en. Nearly all reviews are from Note4 users there. Really sad...
EDIT: Can you measure your battery voltage with a multimeter?
115ek said:
I've got similar problems. Even Odin flash didn't brought the device further. My battery was completely dead so I supplied with an external powersupply (around 3.9V).
That also doesn't work. I needed to add 2.4kOhm resistor between battery GND clip and thermistor clip to fake the non existing thermistor.
If you've got some electrical equipment at home give it a try. It worked for me.
Else you can try a new battery.
Besides that reboots occured after that again. Now I'm going to test the famous Wakelock app https://play.google.com/store/apps/details?id=eu.thedarken.wl&hl=en. Nearly all reviews are from Note4 users there. Really sad...
EDIT: Can you measure your battery voltage with a multimeter?
Click to expand...
Click to collapse
Thank you for your help man ^^, sadly.. I don't have any electrical equipment to measure the voltage, I gave up on this phone.. it's a great phone but the software side is just bad.. :/
I can't even use that app because my phone won't even boot up normally or even go to recovery booting, I tried everything with Odin, what's left is ADB but I don't know how to use that.. do you? Ty!
TheDon772 said:
Thank you for your help man ^^, sadly.. I don't have any electrical equipment to measure the voltage, I gave up on this phone.. it's a great phone but the software side is just bad.. :/
I can't even use that app because my phone won't even boot up normally or even go to recovery booting, I tried everything with Odin, what's left is ADB but I don't know how to use that.. do you? Ty!
Click to expand...
Click to collapse
So you flashed stock ROM with Odin via download mode, right? It's exactly the same behaviour as my phone had. Entering download mode is working flawlessly - recovery isn't working. It booted up, blue font "recovery booting" then turns off and on again. Endless loop.
Did you try charging the phone some hours? Is offline charging working?
Another thing you can try is the fridge. https://forum.xda-developers.com/note-4/help/bootloop-fridge-t3155586 or here https://www.reddit.com/r/galaxynote4/comments/4to05k/note_4_freezer_reboot_trick/.
Just search for note4 and fridge :laugh:
You have a fridge, right?
If that helps (I hope for you :good you need to install the wakelock app afterwards. For me this worked (at least for the last day.) Without I had spontaneous reboots (especially when using the cam).
115ek said:
So you flashed stock ROM with Odin via download mode, right? It's exactly the same behaviour as my phone had. Entering download mode is working flawlessly - recovery isn't working. It booted up, blue font "recovery booting" then turns off and on again. Endless loop.
Did you try charging the phone some hours? Is offline charging working?
Another thing you can try is the fridge. https://forum.xda-developers.com/note-4/help/bootloop-fridge-t3155586 or here https://www.reddit.com/r/galaxynote4/comments/4to05k/note_4_freezer_reboot_trick/.
Just search for note4 and fridge :laugh:
You have a fridge, right?
If that helps (I hope for you :good you need to install the wakelock app afterwards. For me this worked (at least for the last day.) Without I had spontaneous reboots (especially when using the cam).
Click to expand...
Click to collapse
Ty man that worked!!!! I ****ing love u no homo xD

Boot Stuck on Verizon Screen

Hello all,
I recently rooted and flashed a Lineage system to my SM-G900V and had the unfortunate mishap that my cellular service would not come on. So, now I'm trying to flash stock OS from SamMobile.com using Odin3 and am now stuck at the Verizon screen. Any ideas of what's going on and how to get this phone operational? Thanks
i'm having the same problem. Did you find a fix by chance?
mynez said:
i'm having the same problem. Did you find a fix by chance?
Click to expand...
Click to collapse
I have the same problem after simply doing factory reset.Can anyone help .I am familiar with odin but not sure what image I can use to correct this.I ( I did try the factory image with no luck.)

Categories

Resources