Hi all,
Greetings for the day..!
I own a micromax yureka mobile, I upgraded to Lollipop and downgraded to previous version.
Now suddenly its stopped working. please help me to resolve this issue.
-> when I connected phone through USB, red light is on.
->In device manager under "Ports" it detected as "Qualcomm HS-USB QDLoader 9008 (COM4)"
-> I tried in Qfil, its says "Download fail:Sahara fail"
I also tried with EMMC card, In this, When I connected to USB with pressed volume + button and power button, the device starts vibrating until I remove the battery.
hey hi there is problem with my yureka phone it has been switch offing all the time i have buyed new battery and rested my phone many times but the same problem has been occuring can you fix what is the problem
jhaggan said:
hey hi there is problem with my yureka phone it has been switch offing all the time i have buyed new battery and rested my phone many times but the same problem has been occuring can you fix what is the problem
Click to expand...
Click to collapse
Flash stock ROM
Related
Hello all, after ota update i stuck in bootloop, than i try factory reset, than i try to install CWM via fastboot and than my phone get bricked. First time before i bring phone to phone service phone shows LG logo and than security boot error. After "service provider" gives me phone back to me and tell me that he couldnt do nothin i try to power on the phone but screen is only black, nothing on it. Computer shows my phone like Qualcomm HS-USB QDLoader 9008 (com 3 port) . What should i do now, is there any chance to revive it ?
Thanks
djordjesl said:
Hello all, after ota update i stuck in bootloop, than i try factory reset, than i try to install CWM via fastboot and than my phone get bricked. First time before i bring phone to phone service phone shows LG logo and than security boot error. After "service provider" gives me phone back to me and tell me that he couldnt do nothin i try to power on the phone but screen is only black, nothing on it. Computer shows my phone like Qualcomm HS-USB QDLoader 9008 (com 3 port) . What should i do now, is there any chance to revive it ?
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2582142 if you have partition pop out try this link
skypang said:
http://forum.xda-developers.com/showthread.php?t=2582142 if you have partition pop out try this link
Click to expand...
Click to collapse
Like him i have the same problem, and i don't see any partitions at all, nothing appears when i plug mi phone
recently i ported miui v7 for yureka but it got me bootloops
so i tried flashing stock 5.1.1 rom via fastboot but then my electricity went off.
now when i connect to my pc or charger a red light turn on.
i installed drivers of qloader 9008 and device is detected but everytime i try flashing with qfil i got shara error.
its been 5 days after contacting cc they said ur device will be replaced or repaired within 15 days, and u will get a call from
shipping company to get the device to our service centre but no calls.
any1 who unbricked yureka ?>?
msg me on xda or fb vkd linkin(9871633867)
Even mine Yureka also hard bricked...
Please help me, same as above , not getting ON only showing red light when USB connected...
i was using Miui7 , i got update once, after automatic update it went blank.
Please help me guys.... !
Yesterday when I updating my Asus zenfone max Z010D my phone hard brick. Nothing show, not indicating led, not charging, not going to bootloader.not going to recovery. The main thing is that I download ota updates zip from Asus website and flash from stock recovery. When I connect zenfone max to PC, in device manager show qualcomm hs-usb qdloader 9008 driver. And when I google, then I known that I need service ROM which can flashed through Qfil tool.
So, can you give me service ROM so that I fixed this problem.
Please not this is not battery problem. Its os problem. Sorry for my bad English and thanks.
sorry
im not an expert but im using zenphone max sd615 model so i just try to install custom rom on my device i just switch off my device through twrp and its turn off for ever not turning on not charging no led indicates nothing
Christy2375 said:
im not an expert but im using zenphone max sd615 model so i just try to install custom rom on my device i just switch off my device through twrp and its turn off for ever not turning on not charging no led indicates nothing
Click to expand...
Click to collapse
That is the offline charging bug caused by the hardware's reverse charging feature. No solution to date so be careful to not let the battery go below 20% without charging.
Reboot into Fastboot / CSC mode ( vol up + power) and plug the charger. Let it charge for 10-15 mins then reboot.
sir please help me i have already a reverse charging popup problem i try to change the os to solve the bug please any other option
Hello, I had a very little progress. I gave up about my asus zenfone max a year ago but glad that now looks like there's a hope in reviving my phone. I was able to download the right files to flash with QFIL. Most people here say that their PC detected QUALCOMM HS-USB QDLOADER 9008 but mine detect it as QUALCOMM HS-USB DIAGNOSTICS 9006. Due to excitement, I flashed it anyway and it created some memory partition on my hard drive whenever I plug the phone but QFIL gave me an error of :
** Download Fail: Switch To EDL Fail Failed to switch to Emergency Download Mode
I tried to google this error, some encountered it and was able to get a resolution by just removing the battery before plugging it in but our zenfone is with non removable battery. I have no luck yet. Anyone got suggestions ?
MJMarra34 said:
Hello, I had a very little progress. I gave up about my asus zenfone max a year ago but glad that now looks like there's a hope in reviving my phone. I was able to download the right files to flash with QFIL. Most people here say that their PC detected QUALCOMM HS-USB QDLOADER 9008 but mine detect it as QUALCOMM HS-USB DIAGNOSTICS 9006. Due to excitement, I flashed it anyway and it created some memory partition on my hard drive whenever I plug the phone but QFIL gave me an error of :
** Download Fail: Switch To EDL Fail Failed to switch to Emergency Download Mode
I tried to google this error, some encountered it and was able to get a resolution by just removing the battery before plugging it in but our zenfone is with non removable battery. I have no luck yet. Anyone got suggestions ?
Click to expand...
Click to collapse
Where do you get the right files? Could you post them?
Hi guys, I'm in really trouble.
I've got an Asus z010d and I think is hardbricked.
Screen is totally black, no vibrations, no recovery mode, nothing.
The only thing that I've done is to see it via QFIL like the image attached.
I've read some guides around the internet, for restore the device via QFIL with a stock rom, but I not able to get a single rom that has rawprogram0.xml and patch0.xml files that the program need...
I state that I am not a big expert.
Iif anyone knows how to help me, I can also pay him for the right assistance.
Thanks in advance.
Hi
I had bricked my yureka ..while trying to change custom rom , I have already bricked my yureka once but I recovered with help of xda forums
but now the issue is *when I trying to power on the device it suddenly goes to fastboot mode and gets restarts .it's repeat untill the battery is removed *
now the device is not showing in my PC ..it shows usb not recognized ...
it goes to fastboot mode
it is charging
I don't know what to do .... plz help me friends....
After installing all the drivers and the flash tool the most important step is to boot the phone into edl mode or 9008 port which is very tricky step
STEPS:-
1. Power off the phone completely.
2. Press the volume up button for almost 15 sec without leaving press the power button for .5 sec (don't leave the volume button).
3. Again press the power button and hold it and immediately put the cable into the pc .
(note:- these time two buttons are pressed power button and the volume up button which was pressed in step two)
4. Leave both buttons when you receive the connection sound on the pc and check in the device manager now you connected to
the 9008 port instead of the 900E port.
(note:- step 4 can be symbolizes as you will get zuk logo flashed for a split of second after connecting the cable to the pc and
after that whole screen will be black and then after leave all the buttons and flash the phone with qpst)
refference:-http://forums.easy-firmware.com/showthread.php?97902-Lenovo-ZUK-Z2-Plus-EDL-Mode-And-Flashing-Process
how to turn off the phone completely while this phone hard bricked? im a noob, sorry
Aldhryy said:
how to turn off the phone completely while this phone hard bricked? im a noob, sorry
Click to expand...
Click to collapse
Press the power button for long time about 15-20sec until notification led gose off
Additional, some bricked devices may stuck in 900E mode, just keep on pressing in power botton and your device will reboot(screen may still be black, u must stare at the display of mode of your QFIL tool) .After rebooting some times(8∽9 times normally), your device will force boot into 9008 mode (you have to release the botton in a very short time or retry above lol) .
This method isnt from me and just tested on my phone succeefull .Hope helpful to someone.
Zuk Z2 Pro Stuck in EDL HS-USB 9008 Port and automatically connecting and disconnect
Hi,
My Zuk Z2 Pro is stuck in EDL 9008 Port. Phone is totally bricked and no sound, no light, no vibration. When i connect with the computer, phone is connecting on HS USB 9008 port and get disconnected after 20-22 seconds and again automatically connected with in half second time.
I am facing this issue after flashing a ZUI 1.9 by using a QPAST/QFIL application. I think i have made stupid mistake by flashing a phone with "ERASE ALL BEFORE DOWNLOAD" option.
I have tried every scenario to get stable this 9008 port but no luck. Since last 5 days i am studying forums and applying every kind of solution but same result.
I am writing this post with high expectations and hope someone will take notice and help me to get rid of this problem.
I can pay through paypal if someone wants to provide professional services to resolve this matter
I will appreciate if someone have any idea and can help me. Thanks
Farazk said:
Hi,
My Zuk Z2 Pro is stuck in EDL 9008 Port. Phone is totally bricked and no sound, no light, no vibration. When i connect with the computer, phone is connecting on HS USB 9008 port and get disconnected after 20-22 seconds and again automatically connected with in half second time.
I am facing this issue after flashing a ZUI 1.9 by using a QPAST/QFIL application. I think i have made stupid mistake by flashing a phone with "ERASE ALL BEFORE DOWNLOAD" option.
I have tried every scenario to get stable this 9008 port but no luck. Since last 5 days i am studying forums and applying every kind of solution but same result.
I am writing this post with high expectations and hope someone will take notice and help me to get rid of this problem.
I can pay through paypal if someone wants to provide professional services to resolve this matter
I will appreciate if someone have any idea and can help me. Thanks
Click to expand...
Click to collapse
1. Try uninstalling all the drivers you installed.
2.switch of your phone compeletly.
3.follow the link.
https://www.google.co.in/amp/s/foru...ecover-hard-bricked-zuk-z2-plus-t3576007/amp/
Solved: Zuk Z2 Pro Stuck in EDL 9008 mode and port auto connecting/disconnecting
[email protected] said:
1. Try uninstalling all the drivers you installed.
2.switch of your phone compeletly.
3.follow the link.
https://www.google.co.in/amp/s/foru...ecover-hard-bricked-zuk-z2-plus-t3576007/amp/
Click to expand...
Click to collapse
The Problem is resolved. I charged my battery 7-8 Hours and flashing done at first attempt. My phone was stuck in EDL mode and Port 9008 was continues connecting /disconnecting and i was not able to complete a flashing process. Flashing by using Qfil really sucked a battery. So if someone face such kind of issue, please charge your battery for 7-8 Hours and then try flashing.
Aldhryy said:
how to turn off the phone completely while this phone hard bricked? im a noob, sorry
Click to expand...
Click to collapse
The phone turns off completely when there's nothing on-screen (no error), notification, and no vibration