Need help to unbrick yu yureka - YU Yureka Q&A, Help & Troubleshooting

Hi
I had bricked my yureka ..while trying to change custom rom , I have already bricked my yureka once but I recovered with help of xda forums
but now the issue is *when I trying to power on the device it suddenly goes to fastboot mode and gets restarts .it's repeat untill the battery is removed *
now the device is not showing in my PC ..it shows usb not recognized ...
it goes to fastboot mode
it is charging
I don't know what to do .... plz help me friends....

Related

Help me frieds ..yureka plus stucked in yu logo...the logo came again and again ..

HELP ME :crying::crying::crying::crying::crying: MY YUREKA PLUS STUCKED IN THE YU LOGO ....NEVER CAME OVER .THE LOGO CAME AGAIN AND AGAIN..IT RUNNING ON COS 12.1...AND I INSTALLED TWRP THEN I FACTORY RESET THE PHONE...AFTER THAT I REBOOT INTO RECOVERY BUT PHONE STUCKED IN YU LOGO.... HELP ME FRIENDS .....IM A NOOB....THANKS IN ADVANCE
flash stock ROM
Hey buddy there is nobody noob
Just downloads your stock ROM and flash it
JEEVAMYIL said:
HELP ME :crying::crying::crying::crying::crying: MY YUREKA PLUS STUCKED IN THE YU LOGO ....NEVER CAME OVER .THE LOGO CAME AGAIN AND AGAIN..IT RUNNING ON COS 12.1...AND I INSTALLED TWRP THEN I FACTORY RESET THE PHONE...AFTER THAT I REBOOT INTO RECOVERY BUT PHONE STUCKED IN YU LOGO.... HELP ME FRIENDS .....IM A NOOB....THANKS IN ADVANCE
Click to expand...
Click to collapse
1.) Dont write in capitals as it denotes you are shouting
2.) Your phone is soft brick , search youtube for yu yureka softbrick and you will get helpful video.
3.) Dont worry
Thanks#toriya and #king
Why isnt my pc not detecting yu yureka plus CM 12 ON COMMAND PROMPT.I WANT TO ROOT.please help me guys
swegswegnoicenoice said:
Why isnt my pc not detecting yu yureka plus CM 12 ON COMMAND PROMPT.I WANT TO ROOT.please help me guys
Click to expand...
Click to collapse
you might have problem with the drivers . Install pdanet+ in Pc and then check it , it will work you for sure

hard bricked

recently i ported miui v7 for yureka but it got me bootloops
so i tried flashing stock 5.1.1 rom via fastboot but then my electricity went off.
now when i connect to my pc or charger a red light turn on.
i installed drivers of qloader 9008 and device is detected but everytime i try flashing with qfil i got shara error.
its been 5 days after contacting cc they said ur device will be replaced or repaired within 15 days, and u will get a call from
shipping company to get the device to our service centre but no calls.
any1 who unbricked yureka ?>?
msg me on xda or fb vkd linkin(9871633867)
Even mine Yureka also hard bricked...
Please help me, same as above , not getting ON only showing red light when USB connected...
i was using Miui7 , i got update once, after automatic update it went blank.
Please help me guys.... !

yu yureka hardbricked from about 3 days plz help me

OK , my problem is i was downgrading my yu yureka from 6.0.1 rr rom to official kitkat. which i had done many time and firmware is ok.but, three days back i was doing that once again,this time after successfully flashing i tried it to boot up but it is not booting. I have tried many guide of unbricking but no luck. My laptop acer aspire v3-571-6850 windows 10 pro 64- bit some time shows up yureka as QHSUSB_BULK . QFIL also showing "no port avaiable". When i plug in my phone to my pc my pc gets hang. i tried with mi-flash tool too but no luck......
Its been 3 days

lenovo a6000 softbrick

guys i have softbricked my lenovo a6000 and its stucked on lenovo logo
i have tried adb method to flash back recovery mode but when i rum commands it gives error == device null found
when i connect my device to pc it makes an connected sound help me out of this as this is the only mobile i was having
plzzzzzzzzzz guyzzhelp me out
Bro need help I installed twrp and then cm 13 on my a6000 and by mistake I deleted backup of my stock kk rom and now when I try to go in download mode, recovery it doesn't open it show only Lenovo logo . By mistake I flashed a6000+ stock recovery and after that when I try to flash stock recovery of a6000 using adb nothing open .. so now nothing download mode or recovery mode is opening but i still boot into cm13 how solve it to revert back to kk ?
Solution
Shubhamraaj said:
guys i have softbricked my lenovo a6000 and its stucked on lenovo logo
i have tried adb method to flash back recovery mode but when i rum commands it gives error == device null found
when i connect my device to pc it makes an connected sound help me out of this as this is the only mobile i was having
plzzzzzzzzzz guyzzhelp me out
Click to expand...
Click to collapse
I had also stuck in boot logo once in a custum ROM .
but i fixed it : steps .
Download twrp recovery in your pc. ( rename it as twrp.img ) ,
Boot your phone in to fastboot mode .,
Make sure ur pc has ADB drivers ,
Once , phone get into fastboot mode ,
Type this Commands : 1)fastboot devices ( to check if ur phone is getting detected or not , if it shows no device found , check connection )
2) fastboot flash recovery twrp.img ( to flash recovery)
3) fastboot reboot recovery ( to boot into recovery )
4) download any ROM to SD card and flash it from recovery.
Hit thanks button if this helped you.
Hello guys I have a6000 (Lenovo)
But my problem I saw this video
. Which is easy to revert back to kk rom but I have installed twrp which is not useful for above video method .so when I try to to install Philly or cwm which is used in above video it not installing only twrp will installing other custom recoveries not installing so please help me!!! If anybody have the twrp backup of stock kk rom of a6000 please send me!!
My lenovo a6000 also got stock on boot logo in a custom rom. Its now in no use. Now when i try to connect ut to my pc, its only charging. My device is not being connected to pc. Now what to do ??
Androidsabya said:
My lenovo a6000 also got stock on boot logo in a custom rom. Its now in no use. Now when i try to connect ut to my pc, its only charging. My device is not being connected to pc. Now what to do ??
Click to expand...
Click to collapse
FOLLOW THIS
Need help
sasukay said:
FOLLOW THIS
Click to expand...
Click to collapse
Actually 1st i did root my lenovo a6000. Then i was trying to install cyanogen rom through sd card. But it showed e verification failed. And while booting it gets stock showing cyanogen logo. I tried my phone to connect to pc, but it only charges my phone but doesn't show up in connected device in my laptop. I went to an mobile repair shop, bcoz i thought may be i was missing something. But after visiting 3 repair shops, they also couldn't solve my problem. Now how can i get my mobile to back condition ? Need help. If anyone can help plz give quick rply. But i need to talk to someone who can help regarding this issue. So if you can talk to me, plz call me 7008678740. Thank. Plz give response.
New problem arrised
sasukay said:
FOLLOW THIS
Click to expand...
Click to collapse
I could successfully restored my lenovo a6000 kitkat rom. But a new problem arrised. When i try to power on, it just starts for 2 seconds and vanishes immediately just showing the lenovo logo. Again n again it just being on and off. When i put this battery in another a6000 plus mobile, the same problem occurs. I mean , i want to know why is this happening ? Is the battery gone !!!
Androidsabya said:
I could successfully restored my lenovo a6000 kitkat rom. But a new problem arrised. When i try to power on, it just starts for 2 seconds and vanishes immediately just showing the lenovo logo. Again n again it just being on and off. When i put this battery in another a6000 plus mobile, the same problem occurs. I mean , i want to know why is this happening ? Is the battery gone !!!
Click to expand...
Click to collapse
On first look, it seems like your phone is in bootloop and you need to flash new ROM after wiping the partitions correctly. But, then you are saying that same thing is happening when you insert this battery in another A6000. I think your battery has gone rogue due to some virus, just throw it away. Jokes apart, if another device is showing same behaviour then its almost 100% sure, that your battery has issues and need to be replaced. And, why don't you actually check switching on your phone by putting the battery from that another A6000 into your A6000.
I have checked with another battery, my phone works fine. But that particular battery is doing only on off continuously. But #important thing is , i don't think the battery has gone. Bcoz during the on off process, if i press volume down key, it shows lenovo logo and gets stock there. If the battery has problem, then how can be it stays on showing the logo ?? Confused ???

help me in my a6000 bricked

Hey plz help me
My lenovo cant boot
it vibrating when i start and repeat vibrating
No boot logo i flash wrong firmware
Cant connect to pc
Try everything of unbrick process
What i do plz help is dead?
No any type of response
Try this
http://forum.xda-developers.com/len...lenovo-a6000-plus-stuck-booting-logo-t3437378

Categories

Resources