yu yureka hardbricked from about 3 days plz help me - YU Yureka Q&A, Help & Troubleshooting

OK , my problem is i was downgrading my yu yureka from 6.0.1 rr rom to official kitkat. which i had done many time and firmware is ok.but, three days back i was doing that once again,this time after successfully flashing i tried it to boot up but it is not booting. I have tried many guide of unbricking but no luck. My laptop acer aspire v3-571-6850 windows 10 pro 64- bit some time shows up yureka as QHSUSB_BULK . QFIL also showing "no port avaiable". When i plug in my phone to my pc my pc gets hang. i tried with mi-flash tool too but no luck......
Its been 3 days

Related

hard bricked

recently i ported miui v7 for yureka but it got me bootloops
so i tried flashing stock 5.1.1 rom via fastboot but then my electricity went off.
now when i connect to my pc or charger a red light turn on.
i installed drivers of qloader 9008 and device is detected but everytime i try flashing with qfil i got shara error.
its been 5 days after contacting cc they said ur device will be replaced or repaired within 15 days, and u will get a call from
shipping company to get the device to our service centre but no calls.
any1 who unbricked yureka ?>?
msg me on xda or fb vkd linkin(9871633867)
Even mine Yureka also hard bricked...
Please help me, same as above , not getting ON only showing red light when USB connected...
i was using Miui7 , i got update once, after automatic update it went blank.
Please help me guys.... !

lenovo a6000 softbrick

guys i have softbricked my lenovo a6000 and its stucked on lenovo logo
i have tried adb method to flash back recovery mode but when i rum commands it gives error == device null found
when i connect my device to pc it makes an connected sound help me out of this as this is the only mobile i was having
plzzzzzzzzzz guyzzhelp me out
Bro need help I installed twrp and then cm 13 on my a6000 and by mistake I deleted backup of my stock kk rom and now when I try to go in download mode, recovery it doesn't open it show only Lenovo logo . By mistake I flashed a6000+ stock recovery and after that when I try to flash stock recovery of a6000 using adb nothing open .. so now nothing download mode or recovery mode is opening but i still boot into cm13 how solve it to revert back to kk ?
Solution
Shubhamraaj said:
guys i have softbricked my lenovo a6000 and its stucked on lenovo logo
i have tried adb method to flash back recovery mode but when i rum commands it gives error == device null found
when i connect my device to pc it makes an connected sound help me out of this as this is the only mobile i was having
plzzzzzzzzzz guyzzhelp me out
Click to expand...
Click to collapse
I had also stuck in boot logo once in a custum ROM .
but i fixed it : steps .
Download twrp recovery in your pc. ( rename it as twrp.img ) ,
Boot your phone in to fastboot mode .,
Make sure ur pc has ADB drivers ,
Once , phone get into fastboot mode ,
Type this Commands : 1)fastboot devices ( to check if ur phone is getting detected or not , if it shows no device found , check connection )
2) fastboot flash recovery twrp.img ( to flash recovery)
3) fastboot reboot recovery ( to boot into recovery )
4) download any ROM to SD card and flash it from recovery.
Hit thanks button if this helped you.
Hello guys I have a6000 (Lenovo)
But my problem I saw this video
. Which is easy to revert back to kk rom but I have installed twrp which is not useful for above video method .so when I try to to install Philly or cwm which is used in above video it not installing only twrp will installing other custom recoveries not installing so please help me!!! If anybody have the twrp backup of stock kk rom of a6000 please send me!!
My lenovo a6000 also got stock on boot logo in a custom rom. Its now in no use. Now when i try to connect ut to my pc, its only charging. My device is not being connected to pc. Now what to do ??
Androidsabya said:
My lenovo a6000 also got stock on boot logo in a custom rom. Its now in no use. Now when i try to connect ut to my pc, its only charging. My device is not being connected to pc. Now what to do ??
Click to expand...
Click to collapse
FOLLOW THIS
Need help
sasukay said:
FOLLOW THIS
Click to expand...
Click to collapse
Actually 1st i did root my lenovo a6000. Then i was trying to install cyanogen rom through sd card. But it showed e verification failed. And while booting it gets stock showing cyanogen logo. I tried my phone to connect to pc, but it only charges my phone but doesn't show up in connected device in my laptop. I went to an mobile repair shop, bcoz i thought may be i was missing something. But after visiting 3 repair shops, they also couldn't solve my problem. Now how can i get my mobile to back condition ? Need help. If anyone can help plz give quick rply. But i need to talk to someone who can help regarding this issue. So if you can talk to me, plz call me 7008678740. Thank. Plz give response.
New problem arrised
sasukay said:
FOLLOW THIS
Click to expand...
Click to collapse
I could successfully restored my lenovo a6000 kitkat rom. But a new problem arrised. When i try to power on, it just starts for 2 seconds and vanishes immediately just showing the lenovo logo. Again n again it just being on and off. When i put this battery in another a6000 plus mobile, the same problem occurs. I mean , i want to know why is this happening ? Is the battery gone !!!
Androidsabya said:
I could successfully restored my lenovo a6000 kitkat rom. But a new problem arrised. When i try to power on, it just starts for 2 seconds and vanishes immediately just showing the lenovo logo. Again n again it just being on and off. When i put this battery in another a6000 plus mobile, the same problem occurs. I mean , i want to know why is this happening ? Is the battery gone !!!
Click to expand...
Click to collapse
On first look, it seems like your phone is in bootloop and you need to flash new ROM after wiping the partitions correctly. But, then you are saying that same thing is happening when you insert this battery in another A6000. I think your battery has gone rogue due to some virus, just throw it away. Jokes apart, if another device is showing same behaviour then its almost 100% sure, that your battery has issues and need to be replaced. And, why don't you actually check switching on your phone by putting the battery from that another A6000 into your A6000.
I have checked with another battery, my phone works fine. But that particular battery is doing only on off continuously. But #important thing is , i don't think the battery has gone. Bcoz during the on off process, if i press volume down key, it shows lenovo logo and gets stock there. If the battery has problem, then how can be it stays on showing the logo ?? Confused ???

Need help to unbrick yu yureka

Hi
I had bricked my yureka ..while trying to change custom rom , I have already bricked my yureka once but I recovered with help of xda forums
but now the issue is *when I trying to power on the device it suddenly goes to fastboot mode and gets restarts .it's repeat untill the battery is removed *
now the device is not showing in my PC ..it shows usb not recognized ...
it goes to fastboot mode
it is charging
I don't know what to do .... plz help me friends....

please help.

My lenovo k4 note totally dead after after a few days installing RR 5.8.5 and Zero addition kernel,charging in the night and in the morning i find my device is dead can't boot ,no bootloader,no recovery ,not even vibrate,can' t connect to pc when i' m trying to use SP flash tool to recover it,can' detect by flash tool ,i was trying every preloader Driver i was found in xda or another site,
Please anyone i need your experience to bring my device up @mohancm i really apreciate if you can drop some word here,please,
glewo45 said:
My lenovo k4 note totally dead after after a few days installing RR 5.8.5 and Zero addition kernel,charging in the night and in the morning i find my device is dead can't boot ,no bootloader,no recovery ,not even vibrate,can' t connect to pc when i' m trying to use SP flash tool to recover it,can' detect by flash tool ,i was trying every preloader Driver i was found in xda or another site,
Please anyone i need your experience to bring my device up @mohancm i really apreciate if you can drop some word here,please,
Click to expand...
Click to collapse
i think your mobile is bricked.... download sp flash tool and stock rom....load scatter file then click on download button then connect your phone with a data cable if flash tool do not recognise your phone then press volume up key...and flashing will start...hope this will work

Tab 4 10 TB-X304F booting to 900E Diagnostics

I have tb-x304f that I unlocked and flashed TWRP and then tried three different custom roms that all failed to boot. I am trying to restore stock firmware but it is not working. I have installed firmware with qdl in Linux and with QFIL and Lenovo Rescue and Smart Assistant in windows. All three methods report success. After allowing time to boot it ultimately boots into 900E Diagnostic mode after a brief stint as MTP device. The boot logo shows on display, the little Lenovo tone chimes and a progress bar with powered by Android starts. Bar gets about one third of the way and it goes black, then it's 900E Diagnostics again. Use hardware buttons to put it in QDLoader 9008 mode and flash again, same results every time.
I am lost, with successful flashing with no errors, but it won't boot. Do we have a Qualcomm expert in house that can help me figure this one out ?
Hi, first of all, sorry for my English, I don't write it very well.
I have a Lenovo Tab4 A 10 x304l actually it is in bootloop, because I tried to install a Custom ROM and never boot it. I tried to install two stock ROM, that I download to diferent sites, but the tablet after a minute reboot it's self continiusly. I need your help, if Is possible, because I don't know what to do.
My WhatsApp Is ±5354161215, I apreciate any help.
Thanks very much...

Categories

Resources