Database Users

Really old Trident thread

Yeah, I know, its my first release and its build #28. Just wanted to let you guys know how much of my time with testing and building I put in to this. Tons of thanks to Morfic, Netarchy, Supercurio, Dagnus, the great devs at Google, and of course the ever wonderful Codeworkx, Coolya, and Atinm. Now that the dry part is over, lets get to the good stuff!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​
I hid the download link in the text, so you'd better read it!
designgears said:
Joe Biden support Trident!
http://www.joebidensteeth.com/
Click to expand...
Click to collapse
Features:
Massive+stable 1400 MHz Overclock (tested on several phones and found to be stable if you don't use SetCPU or any other CPU frequency setter)
Voodoo Sound v4 (v5 coming soon)
A cool boot screen
A cool name
Gingerbread-ful
Built with codesourcery's ARM-EABI 2010.09 Toolchain for more optimizations than the stock CM7 kernel
Kernel HZ set to 1000 for buttery-smoothnessitude
How to use it: Flash it through ClockworkMod recovery like you would any other ROM. After you've booted, get SetCPU here and then open it, switch your governor to conservative, and then set your min frequency to 100MHz.
Oh! Did I mention its fully opensource?! https://github.com/ytt3r/android_kernel_samsung has the stuff
Please report any issues you have with the kernel here
New website! http://goo.gl/ENJLC
Like it? Hit thanks or buy me some root beer!
Warning: The second you click the download link here (or here for the 256 HZ version you release me of any and all liability of emotional, physical, or metaphysical damage that this kernel may do to you or your phone, even though it was thoroughly tested.

#30
Changed kernel HZ to 1000 for buttery-smoothness and not much increased battery drain. Not like you'd worry about that on an overclocked kernel, right?
Compiled with Codesourcery's ARM-EABI 2010.09 Toolchain for more buttery-smoothness. How much more can it take?!

Looking forward to see where this goes!
Edit: I can only assume this is I9000 based bc all of the ROMS myself and others build are also I9000 based. Is that an appropriate assumption?

Is this compatible with fugu tweaks?
Particularly with Phoenix Ultimate

bunnsguy said:
Is this compatible with fugu tweaks?
Particularly with Phoenix Ultimate
Click to expand...
Click to collapse
Fugu tweaks shouldn't be needed, it's buttery smooth and Gingerbread-y

What's it based on? Any color tweaks?
Edit: boo, it's for cm7
Sent from Serendipity Rom by MikeyMike01 & ChanceM using XDA App

adamholden85 said:
Looking forward to see where this goes!
Edit: I can only assume this is I9000 based bc all of the ROMS myself and others build are also I9000 based. Is that an appropriate assumption?
Click to expand...
Click to collapse
/me facepalms I forgot to mention CM7, should be edited now

downloading now

just wondering if it was necessary to disable to make work

So this is oc to 1400 and can not be adjusted using voltage control, just run with it
CM7

Sounds about right!

How does battery life with this kernel compare to the battery life of stock cm7 nightlies, or the battery life with TheEscapists OC-UV kernel?

So I'm a little curious.. how would you set what OC you want? Would you just set it to 1.3 or 1.4Ghz and not mess with UV settings at all?

ytt3r said:
/me facepalms I forgot to mention CM7, should be edited now
Click to expand...
Click to collapse
I thought I felt a great disturbance in the Force, as if millions of voices suddenly cried out in glee and were suddenly silenced.

Coreym said:
So I'm a little curious.. how would you set what OC you want? Would you just set it to 1.3 or 1.4Ghz and not mess with UV settings at all?
Click to expand...
Click to collapse
Back on Froyo, my phone couldn't even handle 1300MHz, now it easily gets to 1400 and the battery life is plenty for me UV is not implemented yet.
AdamNimrod said:
I thought I felt a great disturbance in the Force, as if millions of voices suddenly cried out in terror and were suddenly silenced.
Click to expand...
Click to collapse
lolwut?

More good stuff for CM7 . Thanks a lot for this release. Going to give it a shot.

Will this be updated with the nightlies? Are fixes like wifi sleep already implemented
CM7

No and yes respectively. I will release periodic updates though, with the latest from teamhacksung.
Sent from my SGH-I897 using XDA App

So it it gonna be running 1.4Ghz all the time or will the frequencies only go to max when required?

You can set the CPU governor in SetCPU, as long as you don't set the frequencies.
In answer to your question, it defaults to ondemand. (So it varies based on how much power you need.)
Sent from my SGH-I897 using XDA App

Siyah Kernel Discussion Thread (IRC)

So here it is.
I know 95% of you here are already familiar with Gokhan, developer of the most popular and unique Kernel for S2, and now S3.
While it is still early, i already created this thread so that noobs and developers alike can discuss their problem, solutions, praises, etc here. Thus, leaving the original thread as useful as possible to all of us.
Let's help Gokhan help us.
Sorry for the inconvenience i cause for a while, now let me give the details for IRC chat, thanks to omniwolf.
Server: irc.FreeNode.net
Channel: #siyah-kernel
web client: http://siyah.twosx.net/
Enjoy everyone!
(Sorry gokhan if i didn't ask permission from you, but i think this thread will also help you).

thanks.. we need a general discussion thread for non-development talks.
it is hard for me to maintain two different threads but I will try to read everything in this one and reply if the time permits.
subscribed.

Thanks for kernel. Been using siyah kernel with S2 and now I get this for S3.

Hi,
Can anyone explain if hotplug_on(hotplug ticked under CPU hotplug settings) has any effect if governor is set to pegasusq?

i can see only cpu0 is always active with this kernel,
is this normal behaviour for this kernel?
and also i cannot set sched_mc to 2 , it always revert back to 0
is it normal?

harunjo said:
i can see only cpu0 is always active with this kernel,
is this normal behaviour for this kernel?
and also i cannot set sched_mc to 2 , it always revert back to 0
is it normal?
Click to expand...
Click to collapse
I fill fix sched_mc issue in the next version. but even after having it fixed I do not recommend you to use it if you do not have a reason. I applied that patch to have ARCH_POWER and sched_mc is there just for those who wants to experiment. but according to my experience there is no use of setting it to 1 or 2.
about cpu0, it should be active.. but if you mean only one core is active and not others pegasusq governor is a bit tweaked to activate the other cores a little harder than the original one.
if you run a stability test or benchmark you will see that the others become active as well.
and for extweaks hotplugging settings: they are only effective with ondemand and other "old" governors for now.
I will make 1,2,3-core modes available for pegasusq and hotplug governors later.

What are the recommended settings for governers etc?

Thanks for your explanation,
i am using stability test app from market,
i only see 2 cpu there
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
gokhanmoral said:
I fill fix sched_mc issue in the next version. but even after having it fixed I do not recommend you to use it if you do not have a reason. I applied that patch to have ARCH_POWER and sched_mc is there just for those who wants to experiment. but according to my experience there is no use of setting it to 1 or 2.
about cpu0, it should be active.. but if you mean only one core is active and not others pegasusq governor is a bit tweaked to activate the other cores a little harder than the original one.
if you run a stability test or benchmark you will see that the others become active as well.
and for extweaks hotplugging settings: they are only effective with ondemand and other "old" governors for now.
I will make 1,2,3-core modes available for pegasusq and hotplug governors later.
Click to expand...
Click to collapse

harunjo said:
Thanks for your explanation,
i am using stability test app from market,
i only see 2 cpu there
Click to expand...
Click to collapse
it is either a different stability test than the one I use or an older version.
I am using stability test v2.5 from the market and it can stress test 4 cores

gokhanmoral said:
it is either a different stability test than the one I use or an older version.
I am using stability test v2.5 from the market and it can stress test 4 cores
Click to expand...
Click to collapse
I can confirm that the latest version from the Market (v2.5) has all 4 cores.

gokhanmoral said:
it is either a different stability test than the one I use or an older version.
I am using stability test v2.5 from the market and it can stress test 4 cores
Click to expand...
Click to collapse
dear gokhanmoral,
sorry my bad, after upgrade to the latest version,
thats app can see all core in your kernel..

Anyone know why Extweaks goes upto 1600Mhz but SetCPU 1800?
Great kernel. Loving this by the way.

Great Kernel thanks so much! Just a quick question.
I'm using SetCPU for the CPU overclock. What do I use for GPU and undervolting?
Cheers

mardon85 said:
Great Kernel thanks so much! Just a quick question.
I'm using SetCPU for the CPU overclock. What do I use for GPU and undervolting?
Cheers
Click to expand...
Click to collapse
you can use the same extweaks for gpu OC/UV

got error after i bought ExTweaks Plus and setting the profile to battery.
any advice?

harunjo said:
got error after i bought ExTweaks Plus and setting the profile to battery.
any advice?
Click to expand...
Click to collapse
Same thing happened to me, and no matter what I do, I can't get it to work again. But it did work initially, till I switched to performance profile.
This is very strange...
BTW great work GM, as was to be expected. Been using your kernel on the I9100, and I think I speak for most of us here when I say I'm damn glad your kernel for the I9300 is finally here

I also get this error in ExTweaks after I switched to performance profile.
Sent from my GT-I9300 using xda premium

Has anyone else managed to change the charging mA using extweaks?
Sent from my GT-I9300 using Tapatalk 2

Digitaniel said:
Same thing happened to me, and no matter what I do, I can't get it to work again. But it did work initially, till I switched to performance profile.
This is very strange...
Click to expand...
Click to collapse
Profiling isn't available yet. The app needs to be updated I guess. Everyone is having the same issue.

For the time being.
harunjo said:
got error after i bought ExTweaks Plus and setting the profile to battery.
any advice?
Click to expand...
Click to collapse
Digitaniel said:
Same thing happened to me, and no matter what I do, I can't get it to work again. But it did work initially, till I switched to performance profile.
This is very strange...
BTW great work GM, as was to be expected. Been using your kernel on the I9100, and I think I speak for most of us here when I say I'm damn glad your kernel for the I9300 is finally here
Click to expand...
Click to collapse
Martin5000 said:
I also get this error in ExTweaks after I switched to performance profile.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
For the time being, please use the kernel as ease to prevent any issues as extweak is not yet FULLY optimized for I9300.
Please understand that gokhan is maintaining other stuffs as well.
Or, try this one:
saunderez said:
I've discovered a "fix" for ExTweaks displaying the "No Compatible Interfaces Detected" error. It seems it's caused by saving the battery profile which aren't implemented at the moment. To fix this use a root explorer and go to the following location.
/data/.siyah/
In this folder delete .active.profile and battery.profile and reboot.
ExTweaks should now be working again.
Click to expand...
Click to collapse

[GUIDE] OnePlus One Uber Battery Savings Guide by oscarandjo

We all know that OnePlus One's 3100 mAh battery and ROM optimizations clearly has given the flagship killer the edge in battery life over its competitors.(puny yureka)
But there is always room for improvement.
Reddit user oscarandjo has published a great guide on various battery saving techniques.
The OnePlus One has a brilliant battery, it's a large battery combined with an efficient processor and that leads to great standby and screen on times. This is why the OnePlus One has one of the best battery lives of all of the current flagships.
There are of course many things you can do to make the battery better, most of these things involve turning useful features off. This guide isn't one where you disable all things that make a smartphone smart, instead it makes small changes that make a big difference.
Many of these methods require root, if you aren't rooted yet and are a technical person get it done ASAP using this guide
This guide doesn't include any basic methods like turning aeroplane mode on in poor signal areas, it's more technical methods.
Click to expand...
Click to collapse
First method is to cut down wakelocks
Second method is to block unnecessary apps location services
Third method is to undervolt your CPU
Fourth method is to use Greenify to auto hibernate apps
Fifth method takes some time, but makes a difference
Sixth method is Amplify
Final method is to hide adverts
Click to expand...
Click to collapse
Visit the thread on Reddit to get the step by step procedures.
Do give oscarandjo's thread an upvote.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​

All of these I already know but it seems like a good guide for people who are new to android.
Some more important things to consider are hotplugging and under clocking.
Underclocking obviously saves battery by reducing the max CPU clock speed and is much more effective than undervolting.
Hotplugging takes up the most battery depending on the type of hotplugging used.
MPDecision is Qualcomm's method of hotplugging and is aggressive but does not respect the max freq when its under clocked. You need MSMLimiter for it to work properly.
Intelliplug has multiple variants in which some allow you to set the min and max number of cores and others which have predefined profiles. Its fast but lags with dt2w.
Alucard hotplug seems the most efficient because stock settings allow for smoothness and battery savings.
My favorite is MSM MPDecision because it allows you to set the number of cores online at any time while respecting other parameters. I find that if you set a max and min of 2 cores online at any time and use the slim CPU governor with gboost disabled, under clocked to 1.5ghz, you get amazing screen on time with zero lag. Approximately an hour every ten percent while being smooth as butter.
Edit: hey @llcooljerry! Nice to see you here on xda for a change!
sent from my amazingly awesome OnePlus One with Stereo Mod
Don't forget to hit thanks!

abhi08638 said:
All of these I already know but it seems like a good guide for people who are new to android.
Some more important things to consider are hotplugging and under clocking.
Underclocking obviously saves battery by reducing the max CPU clock speed and is much more effective than undervolting.
Hotplugging takes up the most battery depending on the type of hotplugging used.
MPDecision is Qualcomm's method of hotplugging and is aggressive but does not respect the max freq when its under clocked. You need MSMLimiter for it to work properly.
Intelliplug has multiple variants in which some allow you to set the min and max number of cores and others which have predefined profiles. Its fast but lags with dt2w.
Alucard hotplug seems the most efficient because stock settings allow for smoothness and battery savings.
My favorite is MSM MPDecision because it allows you to set the number of cores online at any time while respecting other parameters. I find that if you set a max and min of 2 cores online at any time and use the slim CPU governor with gboost disabled, under clocked to 1.5ghz, you get amazing screen on time with zero lag. Approximately an hour every ten percent while being smooth as butter.
Edit: hey @llcooljerry! Nice to see you here on xda for a change!
sent from my amazingly awesome OnePlus One with Stereo Mod
Don't forget to hit thanks!
Click to expand...
Click to collapse
Many thanks, what did you do with cpu boost driver? What are your settings if you have it enabled and which io scheduler?

abhi08638 said:
Edit: hey @llcooljerry! Nice to see you here on xda for a change!
sent from my amazingly awesome OnePlus One with Stereo Mod
Don't forget to hit thanks!
Click to expand...
Click to collapse
Hey buddy I'm glad to be here. But i still lack the technical know how in most parts. I thought i will be able to learn and get the facts from experienced users in here.
The guide is kinda meant for all the new users who wants more out of the battery without much tinkering.
Thanks mate. I seriously will look more into under-clocking my one.
Well i did overclock my M14x laptop a few years back.
Cheers.

eefieboy12 said:
Many thanks, what did you do with cpu boost driver? What are your settings if you have it enabled and which io scheduler?
Click to expand...
Click to collapse
disabled CPU Boost driver because it'll cause lags with slim governor since its basically an on demand governor
sent from my amazingly awesome OnePlus One with Stereo Mod
Don't forget to hit thanks!

[TWEAKS]: Motorola Stock / PA 5.0.2 Basic Tweaks

Hello Everyone,
I would like to share with you'll a few Basic Tweaks that outperformed on my Motorola Stock 5.0.2 Rom (Dual-Sim). These tweaks are aimed at Battery/Performance. Interested people can give a try.
Disclaimer: I am not responsible for any Soft/Hard bricks. Try at your own risk.
I am bad at explanations, so i attach the screenshots that explains them all. I recommend "Device Control" app for applying these tweaks. But again if you are a die-hard fan of some other app then you can try with that.
Precautions:
Before proceeding prefer clearing all older tweaks from kernel tweaker app and make a Reboot. Do not keep multiple kernel tweaker apps, as the settings may conflict.
Furthermore, you may disable few system apps like MotoCare, Checkin, OTA so on which unnecessarily be running in background and hogging your CPU as well as RAM.
NOTE: Do not alter the value of Dalvik VM heap size as i suspect it to cause bootloop. So, if you are trying these tunables on Custom ROM then keep the Dalvik VM heap size untouched.
Results:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PA Tweaks
Exodus/Bliss Tweaks

I usually get 6 hours SOT w/ Stock 5.0.2 and 4 hours SOT with any other custom ROM. Gonna try your fixes and report soon!

So, it says STOCK on title but does it work on Custom Lollipop ROM's? Like CM12 based ones?
PS: I saw your values for governor on PA thread

Ok, nice guide.
Can I ask you or anyone to post default moto g settings or say chow to set it to default if something won't be as good as expected so we/me can change it back to original state ?
Also I have found that after restart I have to set CPU frequency, governor and I/O schedulers again because it's set back to default.

brainscollector said:
Ok, nice guide.
Can I ask you or anyone to post default moto g settings or say chow to set it to default if something won't be as good as expected so we/me can change it back to original state ?
Also I have found that after restart I have to set CPU frequency, governor and I/O schedulers again because it's set back to default.
Click to expand...
Click to collapse
Thanks for the appreciation.
For reverting to default values uncheck the "apply on reboot" option in the app. And make a reboot. That will bring back to stock default values.
XXtremiXX said:
So, it says STOCK on title but does it work on Custom Lollipop ROM's? Like CM12 based ones?
PS: I saw your values for governor on PA thread
Click to expand...
Click to collapse
Yes you can use the same but experience may vary over different ROMs. I am currently experimenting with on PA. Once i find the best set of values i will update it here.

Thanks for tip.
So far so good, feels like it's colder than before and holds battery better.

Hello again.
Just for the people on Xperience ROM and kernel, did this tweaks work for you? I'm on that ROM and still getting hardly 4 SOT but not as much as the OP got in PA ROM.
Btw, OP, could you try best settings for CM12 official? Or they'd rather be the same?
Cheers

Few tweaks that I found fair for battery / performance for Paranoid. More focused towards battery. I get 5:45-6:30 hrs of sot. The rest of settings remain same. You can adjust Auto Fstrimming to 2 hrs.
P.S you can avoid using TASKER settings because i just found that "screen_on" profile settings aren't getting applied sometimes in Custom ROMs.

==vj== said:
Few tweaks that I found fair for battery / performance for Paranoid. More focused towards battery. I get 5:45-6:30 hrs of sot. The rest of settings remain same. You can adjust Auto Fstrimming to 2 hrs.
P.S you can avoid using TASKER settings because i just found that "screen_on" profile settings aren't getting applied sometimes in Custom ROMs.
View attachment 3157525View attachment 3157526View attachment 3157527
Click to expand...
Click to collapse
Could you give the ideal setting for BlissPop?

prateektaneja said:
Could you give the ideal setting for BlissPop?
Click to expand...
Click to collapse
Umm sorry [emoji14] the experience may vary across different ROMs. And since my data is very limited i am least changing ROMs and using paranoid since long time. So, you will need to try out yourself.
But still you can initially try following
Governor : Interactive
Min sample time 60000
Hispeed freq 384000
Sample down factor 60000
Timer rate 20000
Above hispeed 20000
Boost 60000
Hi speed load 50

My experience
Hello there, this is what I reached so far using Attack kernel and adding some changes like fiops I/O and 192 Mhz as min CPU freq.
I followed you recent changes on PA combined with the ones on the first post.
Cheers.
PS: I'm on crDroid, latest build.

after reboot it will be revert to default settings.
how fix it?
thanks.

vbnoob said:
after reboot it will be revert to default settings.
how fix it?
thanks.
Click to expand...
Click to collapse
In app, go to Preferences>Set on boot and tick all a options except last (Systl/VM).
Cheers

Longest run!
ROM: crDroid
kernel: Optimus R5 with inelliplug, fiops, DT2W and S2W deactivated
+ all the tweaks posted by OP so far.
Cheers.

Hello, @==vj==
I think there is a screenshot missing there in first post. The first options under CPU Config> CPU Governor Tuning. I mean, the ones before "highspeed_freq".
Cheers.

Can you suggest me ondemand governor settings?
Sent from my Moto G using XDA Premium 4 mobile app

Best battery life.
Rom : CrDroid
Kernel : Optimus r8 with DT2W activated.
Applied all the tweaks.
Sent from my Moto G using XDA Premium 4 mobile app

Hi guys sorry. I forgot I was authoring a thread [emoji14] lol
Few fresh minor tweaks that boosted off my battery life without losing smoothness of the ROM. Make way to choose a kernel of your choice
Straightway to the tweaks I prefer. Tested on Bliss/Exodus. Governor: Smartmax. Scheduler: fiops. Read ahead: 384. Freq range: 300mhz-1190mhz. Force GPU rendering.
OR​
A more conservative Smartmax.

Did this APP lost some features, or I did something wrong?
Sent from my XT1033 using XDA Free mobile app

nisiomorais said:
Did this APP lost some features, or I did something wrong?
Sent from my XT1033 using XDA Free mobile app
Click to expand...
Click to collapse
Recently, this app updated to a version in which labels for each configuration are the real line of code you find inside the file you are setting. So labels differ now from what OP posted but you can find them by filter some words I guess.
Cheers

[KERNEL SETTINGS]Performance Kernel Settings

WARNING: THIS THREAD IS FOR THOSE WHO HAVE CUSTOM KERNELS INSTALLED ON THEIR DEVICES. I AM NOT RESPONSIBLE FOR ANY DAMAGE DEALT TO YOUR PHONE BECAUSE YOU DID NOT READ MY INSTRUCTIONS CORRECTLY.
NOTE: THIS IS NOT A KERNEL THREAD. IT IS A GUIDE FOR YOUR KERNEL SETTINGS FOR IMPROVED PERFORMANCE AND BATTERY LIFE!
Hi there, guys!!! This thread is for users who have custom kernels on their Moto E(condor). I have tested this by myself on Inazuma Kernel and the performance is smooth and battery life is great!!
Here it is:-
CPU:-
CPU Governor-Impulse(Lionheart and interactive will also do, but I noticed impulse gives more battery juice than the other two)
CPU Minimum Frequency-96
CPU Hotplug:-
Intelliplug
Profile:Eco
Hysteresis Value:4
Threshold Value:350
Cpu Maximum screen Off Frequency: off
Minimum CPU Online:1
Maximum CPU Online:2
Max Cores Screen Off:1
Defer Sampling:268
Boost Lock Duration:2500ms
Down Lock Duration:2500ms
FShift:1
Thermal:-
Core Control: ON
Temperature Throttle: ON
GPU:-
GPU Governor:Simple_Ondemand
IO:-
Internal:ROW
External:ROW
READ AHEAD:1024
Virtual Memory:-
Dirty ratio:20
Dirty background ratio:5
Dirty expire centisecs:200
Min free kbytes:2919
Overcommit ratio:50
Swappiness:60
Vfs cache Pressure:120
Laptop mode:0
Extra free kbytes:6075
ZRAM:510
So...That's it! Screenshots will be added soon! Any kind of help will be appreciated!! For best results, I suggest using greenify for more battery!!!! Stay Tuned!!! And enjoy the awesome settings!
Credits:- @PoseidonKing (Of course)
@zeeshanhussain12 (for the awesome Inazuma kernel!)
Inazuma Kernel thread:Grab it here!!
Greenify apk: Grab it here!!
Hit Thanks if I Helped!!!!!!
​

thanks, i'm using clarity kernel

Orient Marine said:
thanks, i'm using clarity kernel
Click to expand...
Click to collapse
Did u test my method?

Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

How much SOT have you been getting ? Also mention if its only wifi or only 3g data or both. If both please somehow try to mention a rough ratio.
Sent from my Moto E using Tapatalk

Great. Getting a good battery life on clarity kernel

ProudRed said:
How much SOT have you been getting ? Also mention if its only wifi or only 3g data or both. If both please somehow try to mention a rough ratio.
Sent from my Moto E using Tapatalk
Click to expand...
Click to collapse
I get upto 1day 12 hrs SOT on 3g data, as I do not have a WiFi.

12 hours SOT ?
Please post your battery stats once you get time.
Sent from my Moto E using Tapatalk

12hrs screen on time??? seriously man??
attach a screenshot please..

Managed to get 8 hours 30 minutes of SOT with these settings plus merged with some of my settings. Apps used mostly can be seen from the pic.. Used 2-3 hours of 3G data out of 8 and half hours.
Sent from my Moto E using Tapatalk

ProudRed said:
12 hours SOT ?
Please post your battery stats once you get time.
Sent from my Moto E using Tapatalk
Click to expand...
Click to collapse
Sorry...Confused SOT with battery backup....Got7 hour SOT

Then you should try better settings. I get 8 hours with ease. My battery is new though.
Sent from my Moto E using Tapatalk

ProudRed said:
Then you should try better settings. I get 8 hours with ease. My battery is new though.
Sent from my Moto E using Tapatalk
Click to expand...
Click to collapse
Everyday I'm discovering new tweaks for kernels. I'll update the thread as soon as possible..Coz I have exams from tomorrow..

Also, on clarity kernel, disable gentle fair sleepers in the miscellaneous settings

I Use This Settings In Clarity On CM13 And I Look A Great Stability And Speed, Also In Mortal Kombat X The Game Works Faster Great Job

CokeQuevedo said:
I Use This Settings In Clarity On CM13 And I Look A Great Stability And Speed, Also In Mortal Kombat X The Game Works Faster Great Job
Click to expand...
Click to collapse
Thanks for testing! Hit the Thanks button in the OP if I helped you!

Maybe a noob question but, how can I set the 96MHz of minimum frecuency? The minimun for me is 300MHz, this depends on kernel?

LucaProdan said:
Maybe a noob question but, how can I set the 96MHz of minimum frecuency? The minimun for me is 300MHz, this depends on kernel?
Click to expand...
Click to collapse
exactly, you can go so low with cpu frequency only with custom kernel

EnricoBarsanti said:
exactly, you can go so low with cpu frequency only with custom kernel
Click to expand...
Click to collapse
I know, I'm on Clarity and the minimum frecuency is 300Mhz... Can I go lower with othwe kernel ? That is my question
Sent from my left foot Converse

LucaProdan said:
I know, I'm on Clarity and the minimum frecuency is 300Mhz... Can I go lower with othwe kernel ? That is my question
Click to expand...
Click to collapse
Yes, with Kang Kernel, you can go down to 96Mhz.