Database Users

[Tips & Tricks][Poll] SetCPU Advanced Configs [NS & NS4G]- Share Yours!

Ok so it is very hard to find dedicated threads to this and I think the more of us trying this and reporting back to one thread, the more successful we will be in achieving great battery life or performance (i do it for battery life)
Here's what i have found to work well today, just some simple adjustments but my battery didn't drop a single percent for about 1.5 hours of very light use(still great tho).
MAIN TAB
Setting the Scaling to: Conservative
Max: 1000MHz
Min: 100MHz
PROFILES TAB (i only have one profile set):
Screen off - Max: 400 (don't go lower, your phone wont wakeup)- Min: 100- conservative - Priority 50
ADVANCED TAB(minimal changes, but i feel they have helped a bit):
Sampling Rate: 20000
Up Thresh: 80
Down Thresh: 25
Ignore Nice: 0
Freq Step: 20
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
These may not be the best settings as we will play guess n check, but thats the reason of this thread, lets figure these things out.

You need root permission's for this, correct?

driftnut56 said:
You need root permission's for this, correct?
Click to expand...
Click to collapse
yessir you do

You should look into the smartass governor if you want to look for screen off frequencies. SetCPU only wastes CPU cycles for you to do this when a kernel can do it. Of course, I believe the end result is that you're still saving more battery, so at least it's a step forward

I'm overclocking 1.2 ghz. Switching between interactive and conservative.
Conservative has better battery life, but interactive is a bit snappier.
I'm new to the setcpu thing; gathered bits and pieces here and there to try and find the perfect settings.
Great thread though, hopefully people will post so we can take full advantage of this beast!
BTW, Tried to post screenshots, but I need more forum activity.

Had no success with conservative myself it allows the clock to step down to 100 eventhough I have the minimum at 200. The smart ass works like a charm no more lock screen lag
Sent from my Nexus S 4G using Tapatalk

teddybrukshut said:
I'm overclocking 1.2 ghz. Switching between interactive and conservative.
Conservative has better battery life, but interactive is a bit snappier.
I'm new to the setcpu thing; gathered bits and pieces here and there to try and find the perfect settings.
Great thread though, hopefully people will post so we can take full advantage of this beast!
BTW, Tried to post screenshots, but I need more forum activity.
Click to expand...
Click to collapse
Hi. I am new to over clocking with SetCPU. How did you get it to go over the 1000 max? I don't understand all of the other settings enough to feel brave enough to change them other than the first tab.
Thanks

ArizonaLoco said:
Hi. I am new to over clocking with SetCPU. How did you get it to go over the 1000 max? I don't understand all of the other settings enough to feel brave enough to change them other than the first tab.
Thanks
Click to expand...
Click to collapse
You have to flash a custom kernel (i recommend netarchy's kernel), then when you open setcpu, you can "autodetected recommended settings". You will then see the ability to overclock.

itsallsubliminal said:
Ok so it is very hard to find dedicated threads to this and I think the more of us trying this and reporting back to one thread, the more successful we will be in achieving great battery life or performance (i do it for battery life)
Here's what i have found to work well today, just some simple adjustments but my battery didn't drop a single percent for about 1.5 hours of very light use(still great tho).
MAIN TAB
Setting the Scaling to: Conservative
Max: 1000MHz
Min: 100MHz
PROFILES TAB (i only have one profile set):
Screen off - Max: 400 (don't go lower, your phone wont wakeup)- Min: 100- conservative - Priority 50
ADVANCED TAB(minimal changes, but i feel they have helped a bit):
Sampling Rate: 20000
Up Thresh: 80
Down Thresh: 25
Ignore Nice: 0
Freq Step: 20
These may not be the best settings as we will play guess n check, but thats the reason of this thread, lets figure these things out.
Click to expand...
Click to collapse
i used following profiles and UV settings...
still looking into it though...
http://caleb1783.tistory.com/196

I'm not using setcpu. It causes launcher pro to freak out for me. Installed CPU master and all is perfect. Running matr1x 7.5 @1.3 jiggawatts with the smartass v2 governer. Also I'm on gpa17 at the moment.
sent from my Touchwiz'd Nexus S 4g

Siyah Kernel Discussion Thread (IRC)

So here it is.
I know 95% of you here are already familiar with Gokhan, developer of the most popular and unique Kernel for S2, and now S3.
While it is still early, i already created this thread so that noobs and developers alike can discuss their problem, solutions, praises, etc here. Thus, leaving the original thread as useful as possible to all of us.
Let's help Gokhan help us.
Sorry for the inconvenience i cause for a while, now let me give the details for IRC chat, thanks to omniwolf.
Server: irc.FreeNode.net
Channel: #siyah-kernel
web client: http://siyah.twosx.net/
Enjoy everyone!
(Sorry gokhan if i didn't ask permission from you, but i think this thread will also help you).

thanks.. we need a general discussion thread for non-development talks.
it is hard for me to maintain two different threads but I will try to read everything in this one and reply if the time permits.
subscribed.

Thanks for kernel. Been using siyah kernel with S2 and now I get this for S3.

Hi,
Can anyone explain if hotplug_on(hotplug ticked under CPU hotplug settings) has any effect if governor is set to pegasusq?

i can see only cpu0 is always active with this kernel,
is this normal behaviour for this kernel?
and also i cannot set sched_mc to 2 , it always revert back to 0
is it normal?

harunjo said:
i can see only cpu0 is always active with this kernel,
is this normal behaviour for this kernel?
and also i cannot set sched_mc to 2 , it always revert back to 0
is it normal?
Click to expand...
Click to collapse
I fill fix sched_mc issue in the next version. but even after having it fixed I do not recommend you to use it if you do not have a reason. I applied that patch to have ARCH_POWER and sched_mc is there just for those who wants to experiment. but according to my experience there is no use of setting it to 1 or 2.
about cpu0, it should be active.. but if you mean only one core is active and not others pegasusq governor is a bit tweaked to activate the other cores a little harder than the original one.
if you run a stability test or benchmark you will see that the others become active as well.
and for extweaks hotplugging settings: they are only effective with ondemand and other "old" governors for now.
I will make 1,2,3-core modes available for pegasusq and hotplug governors later.

What are the recommended settings for governers etc?

Thanks for your explanation,
i am using stability test app from market,
i only see 2 cpu there
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
gokhanmoral said:
I fill fix sched_mc issue in the next version. but even after having it fixed I do not recommend you to use it if you do not have a reason. I applied that patch to have ARCH_POWER and sched_mc is there just for those who wants to experiment. but according to my experience there is no use of setting it to 1 or 2.
about cpu0, it should be active.. but if you mean only one core is active and not others pegasusq governor is a bit tweaked to activate the other cores a little harder than the original one.
if you run a stability test or benchmark you will see that the others become active as well.
and for extweaks hotplugging settings: they are only effective with ondemand and other "old" governors for now.
I will make 1,2,3-core modes available for pegasusq and hotplug governors later.
Click to expand...
Click to collapse

harunjo said:
Thanks for your explanation,
i am using stability test app from market,
i only see 2 cpu there
Click to expand...
Click to collapse
it is either a different stability test than the one I use or an older version.
I am using stability test v2.5 from the market and it can stress test 4 cores

gokhanmoral said:
it is either a different stability test than the one I use or an older version.
I am using stability test v2.5 from the market and it can stress test 4 cores
Click to expand...
Click to collapse
I can confirm that the latest version from the Market (v2.5) has all 4 cores.

gokhanmoral said:
it is either a different stability test than the one I use or an older version.
I am using stability test v2.5 from the market and it can stress test 4 cores
Click to expand...
Click to collapse
dear gokhanmoral,
sorry my bad, after upgrade to the latest version,
thats app can see all core in your kernel..

Anyone know why Extweaks goes upto 1600Mhz but SetCPU 1800?
Great kernel. Loving this by the way.

Great Kernel thanks so much! Just a quick question.
I'm using SetCPU for the CPU overclock. What do I use for GPU and undervolting?
Cheers

mardon85 said:
Great Kernel thanks so much! Just a quick question.
I'm using SetCPU for the CPU overclock. What do I use for GPU and undervolting?
Cheers
Click to expand...
Click to collapse
you can use the same extweaks for gpu OC/UV

got error after i bought ExTweaks Plus and setting the profile to battery.
any advice?

harunjo said:
got error after i bought ExTweaks Plus and setting the profile to battery.
any advice?
Click to expand...
Click to collapse
Same thing happened to me, and no matter what I do, I can't get it to work again. But it did work initially, till I switched to performance profile.
This is very strange...
BTW great work GM, as was to be expected. Been using your kernel on the I9100, and I think I speak for most of us here when I say I'm damn glad your kernel for the I9300 is finally here

I also get this error in ExTweaks after I switched to performance profile.
Sent from my GT-I9300 using xda premium

Has anyone else managed to change the charging mA using extweaks?
Sent from my GT-I9300 using Tapatalk 2

Digitaniel said:
Same thing happened to me, and no matter what I do, I can't get it to work again. But it did work initially, till I switched to performance profile.
This is very strange...
Click to expand...
Click to collapse
Profiling isn't available yet. The app needs to be updated I guess. Everyone is having the same issue.

For the time being.
harunjo said:
got error after i bought ExTweaks Plus and setting the profile to battery.
any advice?
Click to expand...
Click to collapse
Digitaniel said:
Same thing happened to me, and no matter what I do, I can't get it to work again. But it did work initially, till I switched to performance profile.
This is very strange...
BTW great work GM, as was to be expected. Been using your kernel on the I9100, and I think I speak for most of us here when I say I'm damn glad your kernel for the I9300 is finally here
Click to expand...
Click to collapse
Martin5000 said:
I also get this error in ExTweaks after I switched to performance profile.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
For the time being, please use the kernel as ease to prevent any issues as extweak is not yet FULLY optimized for I9300.
Please understand that gokhan is maintaining other stuffs as well.
Or, try this one:
saunderez said:
I've discovered a "fix" for ExTweaks displaying the "No Compatible Interfaces Detected" error. It seems it's caused by saving the battery profile which aren't implemented at the moment. To fix this use a root explorer and go to the following location.
/data/.siyah/
In this folder delete .active.profile and battery.profile and reboot.
ExTweaks should now be working again.
Click to expand...
Click to collapse

[GUIDE] OnePlus One Uber Battery Savings Guide by oscarandjo

We all know that OnePlus One's 3100 mAh battery and ROM optimizations clearly has given the flagship killer the edge in battery life over its competitors.(puny yureka)
But there is always room for improvement.
Reddit user oscarandjo has published a great guide on various battery saving techniques.
The OnePlus One has a brilliant battery, it's a large battery combined with an efficient processor and that leads to great standby and screen on times. This is why the OnePlus One has one of the best battery lives of all of the current flagships.
There are of course many things you can do to make the battery better, most of these things involve turning useful features off. This guide isn't one where you disable all things that make a smartphone smart, instead it makes small changes that make a big difference.
Many of these methods require root, if you aren't rooted yet and are a technical person get it done ASAP using this guide
This guide doesn't include any basic methods like turning aeroplane mode on in poor signal areas, it's more technical methods.
Click to expand...
Click to collapse
First method is to cut down wakelocks
Second method is to block unnecessary apps location services
Third method is to undervolt your CPU
Fourth method is to use Greenify to auto hibernate apps
Fifth method takes some time, but makes a difference
Sixth method is Amplify
Final method is to hide adverts
Click to expand...
Click to collapse
Visit the thread on Reddit to get the step by step procedures.
Do give oscarandjo's thread an upvote.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​

All of these I already know but it seems like a good guide for people who are new to android.
Some more important things to consider are hotplugging and under clocking.
Underclocking obviously saves battery by reducing the max CPU clock speed and is much more effective than undervolting.
Hotplugging takes up the most battery depending on the type of hotplugging used.
MPDecision is Qualcomm's method of hotplugging and is aggressive but does not respect the max freq when its under clocked. You need MSMLimiter for it to work properly.
Intelliplug has multiple variants in which some allow you to set the min and max number of cores and others which have predefined profiles. Its fast but lags with dt2w.
Alucard hotplug seems the most efficient because stock settings allow for smoothness and battery savings.
My favorite is MSM MPDecision because it allows you to set the number of cores online at any time while respecting other parameters. I find that if you set a max and min of 2 cores online at any time and use the slim CPU governor with gboost disabled, under clocked to 1.5ghz, you get amazing screen on time with zero lag. Approximately an hour every ten percent while being smooth as butter.
Edit: hey @llcooljerry! Nice to see you here on xda for a change!
sent from my amazingly awesome OnePlus One with Stereo Mod
Don't forget to hit thanks!

abhi08638 said:
All of these I already know but it seems like a good guide for people who are new to android.
Some more important things to consider are hotplugging and under clocking.
Underclocking obviously saves battery by reducing the max CPU clock speed and is much more effective than undervolting.
Hotplugging takes up the most battery depending on the type of hotplugging used.
MPDecision is Qualcomm's method of hotplugging and is aggressive but does not respect the max freq when its under clocked. You need MSMLimiter for it to work properly.
Intelliplug has multiple variants in which some allow you to set the min and max number of cores and others which have predefined profiles. Its fast but lags with dt2w.
Alucard hotplug seems the most efficient because stock settings allow for smoothness and battery savings.
My favorite is MSM MPDecision because it allows you to set the number of cores online at any time while respecting other parameters. I find that if you set a max and min of 2 cores online at any time and use the slim CPU governor with gboost disabled, under clocked to 1.5ghz, you get amazing screen on time with zero lag. Approximately an hour every ten percent while being smooth as butter.
Edit: hey @llcooljerry! Nice to see you here on xda for a change!
sent from my amazingly awesome OnePlus One with Stereo Mod
Don't forget to hit thanks!
Click to expand...
Click to collapse
Many thanks, what did you do with cpu boost driver? What are your settings if you have it enabled and which io scheduler?

abhi08638 said:
Edit: hey @llcooljerry! Nice to see you here on xda for a change!
sent from my amazingly awesome OnePlus One with Stereo Mod
Don't forget to hit thanks!
Click to expand...
Click to collapse
Hey buddy I'm glad to be here. But i still lack the technical know how in most parts. I thought i will be able to learn and get the facts from experienced users in here.
The guide is kinda meant for all the new users who wants more out of the battery without much tinkering.
Thanks mate. I seriously will look more into under-clocking my one.
Well i did overclock my M14x laptop a few years back.
Cheers.

eefieboy12 said:
Many thanks, what did you do with cpu boost driver? What are your settings if you have it enabled and which io scheduler?
Click to expand...
Click to collapse
disabled CPU Boost driver because it'll cause lags with slim governor since its basically an on demand governor
sent from my amazingly awesome OnePlus One with Stereo Mod
Don't forget to hit thanks!

[KERNEL SETTINGS]Performance Kernel Settings

WARNING: THIS THREAD IS FOR THOSE WHO HAVE CUSTOM KERNELS INSTALLED ON THEIR DEVICES. I AM NOT RESPONSIBLE FOR ANY DAMAGE DEALT TO YOUR PHONE BECAUSE YOU DID NOT READ MY INSTRUCTIONS CORRECTLY.
NOTE: THIS IS NOT A KERNEL THREAD. IT IS A GUIDE FOR YOUR KERNEL SETTINGS FOR IMPROVED PERFORMANCE AND BATTERY LIFE!
Hi there, guys!!! This thread is for users who have custom kernels on their Moto E(condor). I have tested this by myself on Inazuma Kernel and the performance is smooth and battery life is great!!
Here it is:-
CPU:-
CPU Governor-Impulse(Lionheart and interactive will also do, but I noticed impulse gives more battery juice than the other two)
CPU Minimum Frequency-96
CPU Hotplug:-
Intelliplug
Profile:Eco
Hysteresis Value:4
Threshold Value:350
Cpu Maximum screen Off Frequency: off
Minimum CPU Online:1
Maximum CPU Online:2
Max Cores Screen Off:1
Defer Sampling:268
Boost Lock Duration:2500ms
Down Lock Duration:2500ms
FShift:1
Thermal:-
Core Control: ON
Temperature Throttle: ON
GPU:-
GPU Governor:Simple_Ondemand
IO:-
Internal:ROW
External:ROW
READ AHEAD:1024
Virtual Memory:-
Dirty ratio:20
Dirty background ratio:5
Dirty expire centisecs:200
Min free kbytes:2919
Overcommit ratio:50
Swappiness:60
Vfs cache Pressure:120
Laptop mode:0
Extra free kbytes:6075
ZRAM:510
So...That's it! Screenshots will be added soon! Any kind of help will be appreciated!! For best results, I suggest using greenify for more battery!!!! Stay Tuned!!! And enjoy the awesome settings!
Credits:- @PoseidonKing (Of course)
@zeeshanhussain12 (for the awesome Inazuma kernel!)
Inazuma Kernel thread:Grab it here!!
Greenify apk: Grab it here!!
Hit Thanks if I Helped!!!!!!
​

thanks, i'm using clarity kernel

Orient Marine said:
thanks, i'm using clarity kernel
Click to expand...
Click to collapse
Did u test my method?

Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

How much SOT have you been getting ? Also mention if its only wifi or only 3g data or both. If both please somehow try to mention a rough ratio.
Sent from my Moto E using Tapatalk

Great. Getting a good battery life on clarity kernel

ProudRed said:
How much SOT have you been getting ? Also mention if its only wifi or only 3g data or both. If both please somehow try to mention a rough ratio.
Sent from my Moto E using Tapatalk
Click to expand...
Click to collapse
I get upto 1day 12 hrs SOT on 3g data, as I do not have a WiFi.

12 hours SOT ?
Please post your battery stats once you get time.
Sent from my Moto E using Tapatalk

12hrs screen on time??? seriously man??
attach a screenshot please..

Managed to get 8 hours 30 minutes of SOT with these settings plus merged with some of my settings. Apps used mostly can be seen from the pic.. Used 2-3 hours of 3G data out of 8 and half hours.
Sent from my Moto E using Tapatalk

ProudRed said:
12 hours SOT ?
Please post your battery stats once you get time.
Sent from my Moto E using Tapatalk
Click to expand...
Click to collapse
Sorry...Confused SOT with battery backup....Got7 hour SOT

Then you should try better settings. I get 8 hours with ease. My battery is new though.
Sent from my Moto E using Tapatalk

ProudRed said:
Then you should try better settings. I get 8 hours with ease. My battery is new though.
Sent from my Moto E using Tapatalk
Click to expand...
Click to collapse
Everyday I'm discovering new tweaks for kernels. I'll update the thread as soon as possible..Coz I have exams from tomorrow..

Also, on clarity kernel, disable gentle fair sleepers in the miscellaneous settings

I Use This Settings In Clarity On CM13 And I Look A Great Stability And Speed, Also In Mortal Kombat X The Game Works Faster Great Job

CokeQuevedo said:
I Use This Settings In Clarity On CM13 And I Look A Great Stability And Speed, Also In Mortal Kombat X The Game Works Faster Great Job
Click to expand...
Click to collapse
Thanks for testing! Hit the Thanks button in the OP if I helped you!

Maybe a noob question but, how can I set the 96MHz of minimum frecuency? The minimun for me is 300MHz, this depends on kernel?

LucaProdan said:
Maybe a noob question but, how can I set the 96MHz of minimum frecuency? The minimun for me is 300MHz, this depends on kernel?
Click to expand...
Click to collapse
exactly, you can go so low with cpu frequency only with custom kernel

EnricoBarsanti said:
exactly, you can go so low with cpu frequency only with custom kernel
Click to expand...
Click to collapse
I know, I'm on Clarity and the minimum frecuency is 300Mhz... Can I go lower with othwe kernel ? That is my question
Sent from my left foot Converse

LucaProdan said:
I know, I'm on Clarity and the minimum frecuency is 300Mhz... Can I go lower with othwe kernel ? That is my question
Click to expand...
Click to collapse
Yes, with Kang Kernel, you can go down to 96Mhz.

Kernel Adiutor Settings (~8h sot and colour profiles)

Kernel profiles are just useful if you use overload kernel for nougat or get adreno idler somehow.
Separate Colour profile amoled, night and day:
- just contents a display profile to set colour to vivid or night or an in between day setting
I now realized that phones really need many cores instead of my pc because running lots of cores at a small frequency is much better then less cores with high and heating frequencies,lol.
Fluidness of Game profile checked with pes manager at high def and regless racing 2, I know there is tougher gpu stuff out there, but ehm ah just forget about it
All thanx to Mr Renji for his wonderful highly recommended kernel and I don't think these settings would work this well without his optimizations.
Thx again, and again, and again to Mr. Daniel for almost making us feel like we had bought a bitcoin last year
I am also using high performance accu profile in settings, no need for me to change back and forth for good battery drain.
System:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Gaming: geekbench 1000/3400 antutu 69000
Additional settings:
One stepping is corrected from 79 to 150 mb in the final.zip!
:highfive: :victory: :laugh: :highfive: :victory: :laugh:
Profiles as seen above in profiles combo final zip.
If you need more power maybe first switch from hexa to octa core in cpu hotplug section :good:
For those who don't like changing profiles and with improved adreno settings: https://forum.xda-developers.com/showpost.php?p=75927595&postcount=44

Nice work dude. Keep going mate ?

Awesome settings bro my phone is not heating like a fireball on long hour gaming? I m using the gaming3 profile & syspro on normal usage getting good battery life kudos to ur work?

narenrao.rao7 said:
Awesome settings bro my phone is not heating like a fireball on long hour gaming I m using the gaming3 profile & syspro on normal usage getting good battery life kudos to ur work
Click to expand...
Click to collapse
Thx, I'm keen on over, under and elsewhere clocking since nvidia 6800 LE.
Just give me some settings sliders
Edit: After all I can't believe what kind of a great performance and battery drain can be delivered with a 28nm cpu, with a good os and optimzations

Hi, can we apply these profiles to any kernel and any rom, or it is specific to overload??

nitesh_garg said:
Hi, can we apply these profiles to any kernel and any rom, or it is specific to overload??
Click to expand...
Click to collapse
Hey, I think it is better than the standart frequency settings, overload does cpu undervolt and gives adreno idler, which is reducing msm adreno tz governor to very low gpu frequency in unused diplay moments... which seems to be very useful. Just if I understand erverything right
Added a vivid max display setting I am using for gaming in the beginning post. Happy X-Mas out there :good:

how i can upload these files to rom?

haardx said:
how i can upload these files to rom?
Click to expand...
Click to collapse
You can easily go to profiles and choose import instead of create in kernel adiutor.
They should contain just a few changes for cpu, cpu hotplug and gpu, no risk

FridrufHau said:
You can easily go to profiles and choose import instead of create in kernel adiutor.
They should contain just a few changes for cpu, cpu hotplug and gpu, no risk
Click to expand...
Click to collapse
ok ,thanks for reply i try

haardx said:
ok ,thanks for reply i try
Click to expand...
Click to collapse
I now remember that you will have "problems" with system profile, because there is no relaxed governor for big cores usually (added by overload kernel) maybe you should choose on demand there, which should be a bit more energy saving than interactive... just guessing

FridrufHau said:
I now remember that you will have "problems" with system profile, because there is no relaxed governor for big cores usually (added by overload kernel) maybe you should choose on demand there, which should be a bit more energy saving than interactive... just guessing
Click to expand...
Click to collapse
yes i flashed los 13 and overload 3.7.
I want to check how it will work. and how long on the battery.

How to use there settings, I am unable to import the files via EX kernel manager
Sent from my Le X520 using Tapatalk

nvo2411 said:
How to use there settings, I am unable to import the files via EX kernel manager
Sent from my Le X520 using Tapatalk
Click to expand...
Click to collapse
u must use kernel adiutor

Bro why don't create a separate whatsapp group for this?Then it will be helpful for many users

nvo2411 said:
How to use there settings, I am unable to import the files via EX kernel manager
Sent from my Le X520 using Tapatalk
Click to expand...
Click to collapse
I don't have used ex kernel m. already, maybe you are able to change the settings described in the beginning post and please also notice my post number 6 in this thread

kRahul9 said:
Bro why don't create a separate whatsapp group for this?Then it will be helpful for many users
Click to expand...
Click to collapse
Lol because it would be annoying telling every new group member everything again and again maybe?
And on xda every post which is older then the last three gets ignored, which leads to the telling again and again, too.
No way out

FridrufHau said:
Lol because it would be annoying telling every new group member everything again and again maybe?
And on xda every post which is older then the last three gets ignored, which leads to the telling again and again, too.
No way out
Click to expand...
Click to collapse
Oh but I am noob.I unable to understand the above post..so it could be better if you help me on social groups

kRahul9 said:
Oh but I am noob.I unable to understand the above post..so it could be better if you help me on social groups
Click to expand...
Click to collapse
Just ask bro, it may help somebody else too. Try to describe as detailed as possible what you did and what is the problem now. Worst thing that can happen is to get ignored.

Nice One!
Trying it on illusionKernel v3.1 Final Beta xD

Which profile should I need to use to get 8hrs sot (As you mentioned)?