Hi master , I have a problem after flashing via adb, There is a description (skip the GPRS modem) on the log. so after hh starting signal does not come out. but APN settings mode detected on the card that I used :crying: . I have been doing a lot of flashing starts from via adb to use AsusFlashTool and via the updater, but remains the same signal does not work. Please help me :crying:
im using this rom UL-ASUS_T00F-WW-3.23.40.52 on Asus Zenfone A500CG
AiimTuanaya said:
Hi master , I have a problem after flashing via adb, There is a description (skip the GPRS modem) on the log. so after hh starting signal does not come out. but APN settings mode detected on the card that I used :crying: . I have been doing a lot of flashing starts from via adb to use AsusFlashTool and via the updater, but remains the same signal does not work. Please help me :crying:
im using this rom UL-ASUS_T00F-WW-3.23.40.52 on Asus Zenfone A500CG
Click to expand...
Click to collapse
Check if baseband and IMEI number is missing ?
Related
Hello All,
Things were working, untill i rooted the phone & install cm 13.
everything works fine, only data connection is not happening.
i dialed in *#*#4636#*#* and got that menu the first time i turned off radio and selected wcdma only and turned on radio then rebooted. it didnt work.
Am on custom rom.
should i flash back to stock rom. any ideas pls, ur help is appreciated.
actually cm13 has switching problem
See solution here http://shink.in/G4AgN
my yureka plus flash faild how fix plz help me ( not charging, not recovery mode )
Thanks it worked , awesome!!!!
naveen kutagulla said:
my yureka plus flash faild how fix plz help me ( not charging, not recovery mode )
Click to expand...
Click to collapse
Visit this
https://yu-popcorn-yureka.blogspot.in
See there is a pageof flash a rom via fastboot
Follow it
Hit thanks if i helpd
Good Day,
I'm trying to fix my brother's phone zenfone ze551kl
Initial issue: phone was rebooting on loading up to connect to wifi.
Factory reset was done via stock recovery & upon getting to set up page to select wifi, the phone reboots.
I tried updating via SD Card to latest MM firmware - UL-Z00T-WW-21.40.1220.2056-user & the issue still occured.
I then flashed TWRP via fastboot created a back2stock.zip with UL-Z00T-WW-1.17.40.1531-user & the same issue happened again.
Phone was never rooted & bootloader is still locked.
Any suggestions besides taking to service center would be appreciated as we do not live near any available & would be too costly to ship.
Try to search for an old raw of the ZenFone . I had the same issue with a ZenFone 2 ze551ml rebooting all the time that I tried to connect to Wi-Fi . I ended up flashing a really old raw and with the old raw it was able to connect to any Wi-Fi network without any issues. After that I I just update the phone without any issues
hi
I have xiaomi mi note 2 and updated this device .
but bluetooth not working after update A few months ago.
and wifi not working after new update . this update receive OTA
bluetooth is turned on but not detect any device.( in hardware test has mac address )
wifi is turned on and detect any wireless device but not connect to these devices.( in hard ware test has mac address and detect any devices)
i reset factory and full wipe . change rom by global , stable , developer , china , europe , custom ,.... but not solve this problem
PLEASE HELP ME .
You can try to install the global stable with fastboot.
Before doing this , make a backup because this will erase your entire storage.
I think you need to have adb and fastboot installed on your PC , not sure.
Download the fastboot rom from here: http://en.miui.com/a-234.html
You can find it in the fastboot method section.
Unzip the archive and double click on flash all.bat
Put your phone into fastboot mode and plug it in.
It should take a while , so relax.
It should close the console when it's done , if i'm not wrong.
Boot into the os and test wifi and bluetooth now.
Hope this will help , this is all i can say that it might work
ok . thank you for reply
I used these ways and not working in my device .
my phone should repair and change wifi and Bluetooth IC .
wifi and Bluetooth IC in my phone is ruined and should change by another IC
I haven't good news for you, probably motherboard it's broke. WiFi and Bluetooth it's first symptoms. My tip, try found mi note 2 with broke OLED, motherboard is cheaper than display.
My phone is Asus zenfone max-ZC550KL-16GB with 8916 cpu. My phone was hard bricked and shown as "QUALCOMM HS-USB QDLoader 9008"'.
After several attempts finally i recovered my phone to working condition. But the problem is while booting it shows factory mode with lot of deails like cpu, ram, etc,.
Serial number of the phone is wrong. I can't flash TWRP due to unsigned image error. so i can't root..Phone booting with factory mode symbol only.
Now my phone connects with pc as like this only.
Qualcomm HS-USB Diagnostics 9025 (COM49)
Qualcomm HS-USB NMEA 9025 (COM9)
ADB Interface with yellow triangle !!
Please someone help me to get rid of this factory mode!!! status of Phone photo as below address
imgur.com/VgrbWRB
imgur.com/LHPXfrB
Can anyone have full dump of above model?..Please help me...
kishravi2007 said:
Can anyone have full dump of above model?..Please help me...
Click to expand...
Click to collapse
Solved My problems. Thanks...
First Download this files from the following link
https://www.firmware27.net/2017/10/asus-zenfone-max-z010d-zc550kl-firmware.html
Then download this file Qfil ( this version only working for this files ). If you use another version of Qfil then phone will go back to dead mode(9008)
https://androiddatahost.com/jj9ye
While flashing with his tool it will write half of the files then phone will reboot and exit factory mode.
All credits goes to firmware27.net and gsm developers...
zen fone max ZC550KL factory mode
kishravi2007 said:
Solved My problems. Thanks...
Click to expand...
Click to collapse
Can you share how you solve the problem. I have the same issue on my Zenfone max.
CL
Can u suggest me any way to exit factory mode from my zc550kl msm8939 model?? cant find specific files for 8939 variant. The above method doesnt work. Sahara error. and my IMEI is set to zero after unbricking. Still in factory mode. But i managed to flash a stock firmware from asus official site. Now phone is working normal as everything in english lang and i can find it in adb command. but IMEI is zero and factory mode doesnt go. cant unlock bootloader from fastboot.
pls help
Please try this link ..all details available for you.
http://forum.gsmdevelopers.com/asus..._msm8939-flashing.html?highlight=asus+zenfone
You can get IMEI and exit factory mode for your model.
Hey how did u flash the stock rom please help
what is your device status now?...it is in 9008 mode or 9006?...
Well i have successfully installed the stock rom but my phone shows baseband version as unkown and wifi is not working but when i was in factory mode they were working fine... Qfil now is not recognizing the phone and my bootloader is locked and i am confused now..
My mobile is zenfone max msm8939 32 gb variant
Pls help thank u
flashing problem
how flash this tool or file
My yu yureka a05510 was stuck in bootloop automatically. To resolve the issue i downloaded Yu_Yureka_AO5510_V2_15.04.15_lollipop and flashes it with YGDP software. After setting up the device ,my network is unavailable. The sim detects on both slots but there is no network. I went to the *#*#4636#*#* and tried chaging the settings there by turning off the radio but no luck.
I even deleted the access points and setting the AP manually but still no network. I flashed modems from stock rom but i the cellular network is still not available.
Can anyone help me with this problem
Bro I will also have the same problem
How to fix this please help me bro
did you find any solution?
Did you find the solution?
1 Download this file
https://androidfilehost.com/?fid=745849072291689565
2 extract it
3 rename flash.txt into flash.bat
4 connect your phone into fastboot mode
5 open the flash.bat file, commands will run automatically
6 reboot your phone
Done
Any data lose?
Check the IMEI.
If it syas 0123456789 or some thing like that then your IMEI number gone.
You have to restore IMEI number
then only network signal connects