Related
I was wondering if anyone else has a problem with one or two (sometimes more) OMADM force closes on their phone? For me, it usually only happens immediately after a reboot, and almost always twice. But I do sometimes get it randomly.
Any thoughts on why or how to fix? Thank you in advance
A quick google search reveals almost nothing. Only what OMADM is, seems like a push technology of sorts.
Are you having problems checking for PRL/firmware updates? Are you up to 1.56? Have you rooted and loaded a custom rom? Not sure what exactly would be causing it especially since I don't know exactly what it does.
Yeah I couldn't find much of anything on Google either.
No custom Rom, except for recovery but I am rooted. The MR update wouldn't install ota so I did it the manual way, but if I remember correctly it did that before the update too.
As for prl I think I have it set to manual.
hello all
Firstly, not a hd2 hater, quite the opposite in fact. I love the beast.
However, I'm having a bit of a problem with it.....
Whenever I leave it in my pocket or overnight for a while, and go to unlock it,
It gets stuck on the unlock screen for like 30 secs!
Something similar also happens sometimes when I'm using the phone, e.g. to play a game or read something with MS reader, it will slow everything down to the point that my game is crawling or it takes like 10 odd seconds to change my ebook's page, and this will last for 30s-1min.
I'm running the 1.61 ROM and other than that don't really have any problems!
Has anyone experienced a similar problem? anyone found a workaround?
Would appreciate any help!
anyone else had this problem?
Phone won't unlock
I have a similar problem My HD2 unlock slider won't slide far enough left or right to unlock. The slider stays stuck in a position 90% of the way across. I can slide it to the other side by the same amount, but the phone won't unlock. the only way i can get it to work is to hit the end/power button (the only button which works), and then take the battery out.
Does anybody have any thoughts? I'm about to do a hard reset, but would prefer not to.
Phone won't unlock
I have a similar problem. My HD2 unlock slider won't slide far enough left or right to unlock. The slider stays stuck in a position 90% of the way across. I can slide it to the other side by the same amount, but the phone won't unlock. the only way i can get it to work is to hit the end/power button (the only button which works), and then take the battery out.
Does anybody have any thoughts? I'm about to do a hard reset, but would prefer not to.
Search for the thread "HD2 Died - or did it" to help solve your issues.
WB
hd2 keeps freezing..
Im having the same problem that when my phone is in sleep mode overnight, when i wake up i cant slide it all the way over it takes about 30 secs before it starts working...did you ever find a soulution?
may be u should try
settings/menu/all settings/today/items/today logout to 12hrs
hope this helps
czar.nik said:
hello all
Firstly, not a hd2 hater, quite the opposite in fact. I love the beast.
However, I'm having a bit of a problem with it.....
Whenever I leave it in my pocket or overnight for a while, and go to unlock it,
It gets stuck on the unlock screen for like 30 secs!
Something similar also happens sometimes when I'm using the phone, e.g. to play a game or read something with MS reader, it will slow everything down to the point that my game is crawling or it takes like 10 odd seconds to change my ebook's page, and this will last for 30s-1min.
I'm running the 1.61 ROM and other than that don't really have any problems!
Has anyone experienced a similar problem? anyone found a workaround?
Would appreciate any help!
Click to expand...
Click to collapse
try flashing a custom rom. see my sig for all you need to know about custom roms.
Hmm, mine did the same thing yesterday after using SportyPal on a 4hr MTB ride. It performed great while out and about, but when I got home the unlock screen had frozen. I tried different things to get it going but ended up doing a reboot. Thankfully SportyPal retained my ride data and everything was cool. But I guess there are deeper issues causing more people to experience this?
In any event get rid of the lockscreen. it causes significant lockups and lags on the HD2. Take a look here and read the comments for an additional reg value: http://windowsmobile.mobilitydigest.com/disable-lockscreen-hd2-stops-freezing-its-magic/
mine freezes for no reason at times it wont get pass the first plash screen. i tried flashing just about every rom i can get my hands on and nothing works. i tried flashing android and my phone started getting really warm
Anyone else have issues with drawing a pattern to unlock your phone? over half the time, when I try to draw the pattern, it will only pick up half of what I draw. If you keep trying it will keep doing the same thing. Only fix is to shut the screen off and then turn it back on again and then it will work. Anyone else experience this "bug?"
I'd be willing to donate if someone could fix this. It's annoying as hell.
EDIT: I've experienced this on completely stock DI18, EB13, EC05. I'm about to the point where I don't even want to use it anymore but I would like to have some security feature to lock it. I'm currently on the stock deodexed NOCIQ ROM with DStars clean kernel.
Never had that problem but I hate that unlock screen. PITA to unlock while walking.
Pin for the win
Sent from my SPH-D700 using Tapatalk
blazinazn said:
Anyone else have issues with drawing a pattern to unlock your phone? over half the time, when I try to draw the pattern, it will only pick up half of what I draw. If you keep trying it will keep doing the same thing. Only fix is to shut the screen off and then turn it back on again and then it will work. Anyone else experience this "bug?"
I'd be willing to donate if someone could fix this. It's annoying as hell.
EDIT: I've experienced this on completely stock DI18, EB13, EC05. I'm about to the point where I don't even want to use it anymore but I would like to have some security feature to lock it. I'm currently on the stock deodexed NOCIQ ROM with DStars clean kernel.
Click to expand...
Click to collapse
I had a similar problem for a while, except that it happened whether the phone was locked or not. Took it in and sprint said that touch sensor was defective, replaced the screen and it was good as new!
blazinazn said:
Anyone else have issues with drawing a pattern to unlock your phone? over half the time, when I try to draw the pattern, it will only pick up half of what I draw. If you keep trying it will keep doing the same thing. Only fix is to shut the screen off and then turn it back on again and then it will work. Anyone else experience this "bug?"
I'd be willing to donate if someone could fix this. It's annoying as hell.
EDIT: I've experienced this on completely stock DI18, EB13, EC05. I'm about to the point where I don't even want to use it anymore but I would like to have some security feature to lock it. I'm currently on the stock deodexed NOCIQ ROM with DStars clean kernel.
Click to expand...
Click to collapse
I had a similar problem, but found a way around it. I removed my pattern and downloaded an application called "AL II" by 'SmartDog Studio'. It's a security application that basically tricks any app you want into believing it's force closing, and in order to get it to work, you have to perform something. It's kind of hard to explain it in words, but i'll try my best. I downloaded the application, and opened it. Once opened, I chose 'Messaging' for the sake of this explanation. So I selected messaging and hit "protect". Once it says the application is protected, you just hit the menu button and change the settings to how you want. I personally chose "Rotate motion" for my selected unlock method. Basically what happens at this point is if someone picks up your phone and tries to read your messages, the application will force close (and will continue to do this forever until you perform the selected unlock method). With the "Rotate motion", you just allow the force close dialog box to pop up, then you just have to rotate your phone to have your screen facing down, then rotate it right side up again, and the force close dialog box disappears and you're back in business. There's other options you can choose such as, when the force close dialog box pops up, instead of selected "force close" you can tap on the text body of the pop up either 2 or 5 times (whichever you chose for it) and it will unlock your phone that way too. Basically what you're doing is tricking whoever picks your phone up into thinking your phone is a complete piece of garbage and they'll put it right back down because nothing will work for them. I hope that wasn't too confusing. If you wanna know more about it, just shoot me a PM and i'll be glad to explain it in more detail.
Zeke.
I've been using my fingerprint scanner more as I've been using Android Pay more, and I have noticed something incredibly annoying. About a day after I set a fingerprint, I can't get it to work. I can try over, and over, and over again and it just will not work. I can set another fingerprint using the same finger and it will work for about another day, but then the same thing happens. This has happened over a couple security updates so I know it's not specific to the latest March one. Has anyone else seen this issue? At first I thought maybe it was because my hands were dry and it was having a hard time getting a reading, but this has gotten ridiculous.
Hi, first of all I apologise if this question has been asked but I don't know how to search just this place.
I'm using everything stock, no root, stock launcher.
I have my phone set up to ask for the password on reboot. I have my fingerprint reader set up to unlock my phone. I also have the fingerprint reader set up to wake the screen.
However under certain circumstances the fingerprint reader does not unlock the phone. The most reliable way to trigger this behavior is to plug the phone in to charge.
I exclusively lock the screen with the power button.
The fingerprint reader is still responsive and it still wakes the screen but there's no vibration feedback and it does not unlock. After I unlocked the phone with my password and lock it again the reader works again.
So what's going on here? How should I debug this?
After reboot it is normal to ask for password first time. Sometimes i have also seen this but when i unlock with pattern (my backup way) and lock again it works fine. I can not trace this to be related with charging or something else and it happens rarely but i have seen it also. Maybe a software bug.
Looking back to the days when i have LG V10 i remember that i had the same problem with fingerprint sensor not working sometimes. It was more frequently related to heat buildup as it was hot phone anyway.
I had the same problem these days, I think the fingerprint reader won't work if your hands are really cold.
Hmm I don't think my U Ultra is getting particularly hot and, no, my hands are certainly not very cold either. This behavior happens indoors.
It's just extra security plan and simple
Sometimes, not very often though, my fingerprint reader refuses to respond. Not even a misread where you get haptic feedback and not a lot else.
Just using the power button and entering my back up security (pattern in my case) and it comes back to life.
I don't particularly worry about it, but I suppose it's nice to see that it's not just me
Will see if the upgrade to 8.0 fixes it.
I met this problem.The solution was very interesting.I use Yandex.disk app.This problem did occur after the Yandex.disk app is update.I hard reset my phone.The problem was not in my phone.But I setup Yandex.Disk app the problem repeat occur.İf you installed Yandex.Disk, uninstall the application.if you don't use Yandex.Disk,The last apps update uninstall to try.
Good Lord I have so many apps installed though...
Then go to a full factory reset and see if it helps, thats the 1st thing you do when you have problem.
After a bit of experimentation this behavior seems to have stopped after I disabled/removed all Smart Lock Trusted Places -- a feature that is already known to be buggy.
I have it too, once a day it puts me to enter the password, its a security or a bug idk.
No more, no less, every time when its charging. I installed some 3rd party apps, its possible that they are to blame.
We will see when 8.o strikes and i will hard reset.
Garkan said:
I have it too, once a day it puts me to enter the password, its a security or a bug idk.
No more, no less, every time when its charging. I installed some 3rd party apps, its possible that they are to blame.
We will see when 8.o strikes and i will hard reset.
Click to expand...
Click to collapse
8 fixed this bug for me but i found more bugs in oreo so i am thinking to roll back to 7.0 and meet fingerprint sensor bug again because oreo problems are disgusting - car bluetooth does not works as it should - i can't read addressbook in my car head unit - it shows error. i found that is some bluetooth software parts was not included in 8.0 but successfully fixed in 8.1. and i'am pretty sure we will never receive 8.1 for u ultra.
in russian 4pda forum i found some reports (unconfirmed yet) that fingerprint bug disappeared. maybe somebody here can confirmed it?
No i have android 8 and issue still occurs sadly did not found a fix.
I've suddenly had this issue a couple of days ago a couple of times. I didn't do anything (except a couple of reboots) and it was fixed again.
Now after updating to Oreo and again using leedroids ROM, i didn't experience theissue again..
I talked to a htc representative and said to clear credentials from security/encryption and credentials seems to be a conflict in security certificates. For the moment it works.