Anyone else have issues with drawing a pattern to unlock your phone? over half the time, when I try to draw the pattern, it will only pick up half of what I draw. If you keep trying it will keep doing the same thing. Only fix is to shut the screen off and then turn it back on again and then it will work. Anyone else experience this "bug?"
I'd be willing to donate if someone could fix this. It's annoying as hell.
EDIT: I've experienced this on completely stock DI18, EB13, EC05. I'm about to the point where I don't even want to use it anymore but I would like to have some security feature to lock it. I'm currently on the stock deodexed NOCIQ ROM with DStars clean kernel.
Never had that problem but I hate that unlock screen. PITA to unlock while walking.
Pin for the win
Sent from my SPH-D700 using Tapatalk
blazinazn said:
Anyone else have issues with drawing a pattern to unlock your phone? over half the time, when I try to draw the pattern, it will only pick up half of what I draw. If you keep trying it will keep doing the same thing. Only fix is to shut the screen off and then turn it back on again and then it will work. Anyone else experience this "bug?"
I'd be willing to donate if someone could fix this. It's annoying as hell.
EDIT: I've experienced this on completely stock DI18, EB13, EC05. I'm about to the point where I don't even want to use it anymore but I would like to have some security feature to lock it. I'm currently on the stock deodexed NOCIQ ROM with DStars clean kernel.
Click to expand...
Click to collapse
I had a similar problem for a while, except that it happened whether the phone was locked or not. Took it in and sprint said that touch sensor was defective, replaced the screen and it was good as new!
blazinazn said:
Anyone else have issues with drawing a pattern to unlock your phone? over half the time, when I try to draw the pattern, it will only pick up half of what I draw. If you keep trying it will keep doing the same thing. Only fix is to shut the screen off and then turn it back on again and then it will work. Anyone else experience this "bug?"
I'd be willing to donate if someone could fix this. It's annoying as hell.
EDIT: I've experienced this on completely stock DI18, EB13, EC05. I'm about to the point where I don't even want to use it anymore but I would like to have some security feature to lock it. I'm currently on the stock deodexed NOCIQ ROM with DStars clean kernel.
Click to expand...
Click to collapse
I had a similar problem, but found a way around it. I removed my pattern and downloaded an application called "AL II" by 'SmartDog Studio'. It's a security application that basically tricks any app you want into believing it's force closing, and in order to get it to work, you have to perform something. It's kind of hard to explain it in words, but i'll try my best. I downloaded the application, and opened it. Once opened, I chose 'Messaging' for the sake of this explanation. So I selected messaging and hit "protect". Once it says the application is protected, you just hit the menu button and change the settings to how you want. I personally chose "Rotate motion" for my selected unlock method. Basically what happens at this point is if someone picks up your phone and tries to read your messages, the application will force close (and will continue to do this forever until you perform the selected unlock method). With the "Rotate motion", you just allow the force close dialog box to pop up, then you just have to rotate your phone to have your screen facing down, then rotate it right side up again, and the force close dialog box disappears and you're back in business. There's other options you can choose such as, when the force close dialog box pops up, instead of selected "force close" you can tap on the text body of the pop up either 2 or 5 times (whichever you chose for it) and it will unlock your phone that way too. Basically what you're doing is tricking whoever picks your phone up into thinking your phone is a complete piece of garbage and they'll put it right back down because nothing will work for them. I hope that wasn't too confusing. If you wanna know more about it, just shoot me a PM and i'll be glad to explain it in more detail.
Zeke.
Related
hello all
Firstly, not a hd2 hater, quite the opposite in fact. I love the beast.
However, I'm having a bit of a problem with it.....
Whenever I leave it in my pocket or overnight for a while, and go to unlock it,
It gets stuck on the unlock screen for like 30 secs!
Something similar also happens sometimes when I'm using the phone, e.g. to play a game or read something with MS reader, it will slow everything down to the point that my game is crawling or it takes like 10 odd seconds to change my ebook's page, and this will last for 30s-1min.
I'm running the 1.61 ROM and other than that don't really have any problems!
Has anyone experienced a similar problem? anyone found a workaround?
Would appreciate any help!
anyone else had this problem?
Phone won't unlock
I have a similar problem My HD2 unlock slider won't slide far enough left or right to unlock. The slider stays stuck in a position 90% of the way across. I can slide it to the other side by the same amount, but the phone won't unlock. the only way i can get it to work is to hit the end/power button (the only button which works), and then take the battery out.
Does anybody have any thoughts? I'm about to do a hard reset, but would prefer not to.
Phone won't unlock
I have a similar problem. My HD2 unlock slider won't slide far enough left or right to unlock. The slider stays stuck in a position 90% of the way across. I can slide it to the other side by the same amount, but the phone won't unlock. the only way i can get it to work is to hit the end/power button (the only button which works), and then take the battery out.
Does anybody have any thoughts? I'm about to do a hard reset, but would prefer not to.
Search for the thread "HD2 Died - or did it" to help solve your issues.
WB
hd2 keeps freezing..
Im having the same problem that when my phone is in sleep mode overnight, when i wake up i cant slide it all the way over it takes about 30 secs before it starts working...did you ever find a soulution?
may be u should try
settings/menu/all settings/today/items/today logout to 12hrs
hope this helps
czar.nik said:
hello all
Firstly, not a hd2 hater, quite the opposite in fact. I love the beast.
However, I'm having a bit of a problem with it.....
Whenever I leave it in my pocket or overnight for a while, and go to unlock it,
It gets stuck on the unlock screen for like 30 secs!
Something similar also happens sometimes when I'm using the phone, e.g. to play a game or read something with MS reader, it will slow everything down to the point that my game is crawling or it takes like 10 odd seconds to change my ebook's page, and this will last for 30s-1min.
I'm running the 1.61 ROM and other than that don't really have any problems!
Has anyone experienced a similar problem? anyone found a workaround?
Would appreciate any help!
Click to expand...
Click to collapse
try flashing a custom rom. see my sig for all you need to know about custom roms.
Hmm, mine did the same thing yesterday after using SportyPal on a 4hr MTB ride. It performed great while out and about, but when I got home the unlock screen had frozen. I tried different things to get it going but ended up doing a reboot. Thankfully SportyPal retained my ride data and everything was cool. But I guess there are deeper issues causing more people to experience this?
In any event get rid of the lockscreen. it causes significant lockups and lags on the HD2. Take a look here and read the comments for an additional reg value: http://windowsmobile.mobilitydigest.com/disable-lockscreen-hd2-stops-freezing-its-magic/
mine freezes for no reason at times it wont get pass the first plash screen. i tried flashing just about every rom i can get my hands on and nothing works. i tried flashing android and my phone started getting really warm
I have a stock phone, updated with the OTA update. I have this problem where the Home and Search softkeys will stop working all of a sudden. When you press them, they seem to flash so I dont believe this is hardware. Also when I restart the phone, the problem goes away, at least for a little while. When this is happening, to get to the homescreen I basically have to use the back soft key to go all the way back. I thought that maybe this was due to some updates I did so I uninstalled NoLed and TaskSwitcher and I was fine for a few days but it just happened again. Has anyone else experienced this? Thanks, this is my first Android.
If I were, I'd exchange the phone. Sounds like the sensor for those buttons is defective.
Sent from my SCH-I500 using XDA App
It's not the sensor as a reboot will immediately fix this issue. Some say that doing a reset will fix it. Thinking about trying that.
Anyone else having this problem,
Sometimes when I get to unlock screen and swipe across it doesnt react to it the first time and I have to do it again.
Yes. Many, many times. I resolved this by downloading an app that gets rid of the bar from me, so now I press home. Unfortunately this means I have no security on my phone. Yay!
Yea; I mean how much of a problem is it though? I guess it takes a second sometomes to initialize the scanner.
Rooted/ROM Captivate (For Sale)
Rooted Atrix
I am not talking about the finger printer reader, also at work I have about 1 second to check phone, so it just gets annoying when I spend that one second trying to get passed the lock screen
Oh! Yea that happens to me sometimes as well; I hate it.
It also "confuses" me when I slide it but there's nothing really being slid you know? Just the color.
Rooted/ROM Captivate (For Sale)
Rooted Atrix
Never had a problem with slide to unlock.
The finger scanner though, you have to remember at what angle and what direction you scanned in. Finding a comfortable swipe is better than trying to get a correct register. It's kind of like practicing golf swings.
I didn't have this issue till I did a factory reset, now the lock screen is soo slow.
Sent from my MB860 using XDA App
Was going to say same thing. I did my 1.5.7 update a little bit ago and really having seconds from when I hit the power button until my screen wakes up. I can actually hit the button and scan my finger before it comes on. Anyone else having this type of slowdown?
Sorry for bringing up a old thread but kinda based on what I am dealing with.
My Atrix keeps waking itself up after putting it to sleep and STAYING on...
It is killing the battery life. This has only happened since the update...
Solutions?
I had that once before on my old build. Not sure what did it but it did end up stopping after a little bit myself. I think it was an app that was doing it
Spinstorm said:
My Atrix keeps waking itself up after putting it to sleep and STAYING on...
It is killing the battery life. This has only happened since the update...
Solutions?
Click to expand...
Click to collapse
I would check to see if any apps are causing your phone to wake up; I remember this happening on my Captivate last year. I don't remember what the problem was but I knew it stopped after a week or so.
Something I have noticed with 1.5.7 the supposed fix to allow the phone to sleep while charging was a sinple change in the setting under development. I also have noticed when you place the phone on the charger if the lock screen is up and you are using the fingerprint scanner. you can never ( or should I say rarely) get it to stay asleep as it keeps reading the button press as a finger swipe. The only solution I have found is to make the the phone is on the home screen and press the button to make it sleep. then it stays asleep
I have had things like this happen to me, for a while I was using GingerBlur and I thought thats why the phone was glitching but when I went back to stock I had it glitch like this a few times on me also... I almost feel like my Atrix is running a beta...
I have not had any issues with the slider itself but i have observed this for a few days now. When i slide to unlock the screen, it goes directly to the contacts page and just freezes for a while. no other buttons work except hitting the home button and then ot works as usual. Any pointers? i recently rooted my phone and flashed it with the Alien rom [build #4 - 2.6.32.9]
Hey guys, I seem to have a problem with my A4g.
Basically, once in a while, the screen starts to press on its own. Usually towards the middle of the screen, so if i go to text message, keys such as "F" and "S" get rapidly hit on their own! Turning off and on the screen helps fix it, but sometimes i need to restart the phone altogether.
Anyone else having this issue?
I'm on Gingerbread with Unlocked bootloader and rooted but this problem has been around since i got the phone.
we'll need to know a little bit of information on your phone.
are you running stock software? (for instance, i'm using Ninja Speed Freak 0.4.5 and Faux's custom OC kernel)
have you dropped your phone recently?
has your phone gotten any contact with water recently?
do you have any suspicious third party apps installed?
bigdog_nick said:
Basically, once in a while, the screen starts to press on its own. Usually towards the middle of the screen, so if i go to text message, keys such as "F" and "S" get rapidly hit on their own!
.
Click to expand...
Click to collapse
OMG! its like a spirited game!!!
Sometime it happens to me, the screen to become unresponsive..
And i turn of the screen and on and its gone.
The thing happened at you it happens only with raindrops.
And rarely FP sensor dont work, so i reboot..
Are you stock? Or on a custom rom probably ?
As i wrote in OP, i'm running on the AT&T Unlocked bootloader 2.3.4 found here:
http://forum.xda-developers.com/showthread.php?t=1182526
This problem isn't due to the rom, it happened to me before the update too.
Ive only dropped this phone once since May and it was on carpet.
have you tried doing a factory reset? quick google search brought this up for me, but i'm not having the problem so i can't test it out myself for ya =\
http://www.atrixforums.com/forum/motorola-atrix-general-discussion/889-screen-issues.html
That was the first method i tried 3-4 months ago with no luck.
I can't do that anymore because of the unlocked bootloader
Once in a while my screen will go completely BLACK outta nowhere... NOTHING I do brings screen back on or does ANYTHING at all UNTIL about 30-60 seconds it suddenly comes back on..
**Here is the curious part.. When screen comes back it is ALWAYS in CAMERA mode! weird right? I'm thinking maybe a virus though have found none...
My ONLY other guess is that it may be related to app LASTPASS as im running it at time AND it has a screenlock function after idle timer...
The part with camera showing up on return is quite disturbing though, although maybe thats a result of me pressing every button possible during blackout??
Any clues or similar experiences? It used to occur daily.. Now just once a week.. Every virus spyware scan came clean.. Tho since phone is NOT rooted im skeptical how accurate these virus/trojan screeners can be without system access?
Phone has never been out of my possession & utilize screenlock since day 1...
??