Best + costom rom for lenovo k3 note - K3 Note General

**Here is link of best costom rom currently i am using over 4 month no issues found...
**I recommend you all try the final version with no bugs....
But 2.7× have little bugs that solve in the link of thread located (currently using 2.7× rom)
Link of the thread located at : mod edit - link needrom link removed
**If you can't login the website of need rom
Here i provide you direct link: https://androidfilehost.com/?w=files&flid=224915
**Important notice: clean flash (recommend) after flash if any issue found just factory reset your device using twrp recovery 3.1.1.0 your phone internal data won't deleted (tested by me).

try this
by far xenon hd is the best

can u send the link to download twrp recovery and lenovo usb drivers

i have install custom rom i have issue after swtich off my phone didn't opening n not showing charging light aslo****

TWRP link
twrp link below
https://drive.google.com/file/d/0B2I5z1mFfUpcaE5sZTk3M2Vrc1E/view
---------- Post added at 05:33 AM ---------- Previous post was at 05:31 AM ----------
qsamir said:
i have install custom rom i have issue after swtich off my phone didn't opening n not showing charging light aslo****
Click to expand...
Click to collapse
have u installed the latest version of TWRP?
did u get any error when flashing via TWRP?
which rom did u use ?
---------- Post added at 05:33 AM ---------- Previous post was at 05:33 AM ----------
https://drive.google.com/file/d/0B2I5z1mFfUpcaE5sZTk3M2Vrc1E/view

I have just flashed v2.9 with Renice kernel Xs. So far, it's smooth. Great work!! it passed SafetyNet after first reboot, but i'm out of space due to apps...

1Nomintan said:
Guys, which of the Nougat rom is bug free (or least buggy) for K3 Note available till date.
Thanks in advance for your support.
Click to expand...
Click to collapse
go for xenon hd

1Nomintan said:
Thanks for your response.:good:
Even my little bit of XDA search says the same.
Only thing I really could not find are bugs on XenonHD, wish if you can help me for the same
Click to expand...
Click to collapse
ok..here goes.
1. on first boot up the rom doesnt have a keyboard ,,so have to download a keyboard (i used a pc to download and transfer the apk to it)
after 18 days usage report.
bugs encountered as follows.
1.wifi gets disconnected sometimes after long usage.(now its fixed)
2.if using the phone for some long time ,then the mic wont work during phone calls,have to reboot again to make it work.(sometimes)
3.prob with lucky patcher(but no big deal,just a warning ).
pros,
1.best rom yet.
2.quick charging.
3.quick bootup.
4.less bugs.

Does This rom give me OTA update for fixing bugs?

Rakesh Mahto said:
**Here is link of best costom rom currently i am using over 4 month no issues found...
**I recommend you all try the final version with no bugs....
But 2.7× have little bugs that solve in the link of thread located (currently using 2.7× rom)
Link of the thread located at : mod edit - link needrom link removed
**If you can't login the website of need rom
Here i provide you direct link: https://androidfilehost.com/?w=files&flid=224915
**Important notice: clean flash (recommend) after flash if any issue found just factory reset your device using twrp recovery 3.1.1.0 your phone internal data won't deleted (tested by me).
Click to expand...
Click to collapse
Hey there. Androidfilehost link to the rom says access denied! Please make it accesible

Related

How to remove the boot image added by GingerIcejelly?

I recently installed GingerIceJelly custom ROM on my Galaxy Y Duos GT-S6102. It added a boot image (that is displayed even before the recovery menu when I boot in a recovery mode). I later reverted back to my stock ROM, but the boot image still remains. I had thought it was part of the GingerIceJelly ROM, but apparently not. If it is not part of the kernel, where is it?
Is there a way to remove it?
Thanks
Eldho Thomas
Boot.img isn't part of the kernel it's all of it lol boot.img is the kernel
flashing stock Rom via Odin should wipe it
PHONE SLOW CLICK ME?
_____________________________________
"No one lives in the slums because they want to. It's like this train. It can't run anywhere except where its rails take it."- Cloud[FFvii]"​
Lol. boot.img is the kernel. The thing you want is the Bootanimaton right? Its in the system/media with the file name of bootanimaton.zip
eldhothomas said:
I recently installed GingerIceJelly custom ROM on my Galaxy Y Duos GT-S6102. It added a boot image (that is displayed even before the recovery menu when I boot in a recovery mode). I later reverted back to my stock ROM, but the boot image still remains. I had thought it was part of the GingerIceJelly ROM, but apparently not. If it is not part of the kernel, where is it?
Is there a way to remove it?
Thanks
Eldho Thomas
Click to expand...
Click to collapse
U talking about yellow pink screen that comes before boot?
Its because of kernel made for the rom..change your kernel and its done..
Sent from my GT-S6102 using xda app-developers app
Thanks guys !
So, when I restore my phone back to the stock Samsung ROM, doesn't it restore back to the old Kernel?
PS: I am talking about the purple-yellow-etc screen that says "GingerIceJelly with compact kernel etc..... Nitu Bhaskar etc." even before the Samsung boot animation.
Thanks
Eldho Thomas
eldhothomas said:
Thanks guys !
So, when I restore my phone back to the stock Samsung ROM, doesn't it restore back to the old Kernel?
PS: I am talking about the purple-yellow-etc screen that says "GingerIceJelly with compact kernel etc..... Nitu Bhaskar etc." even before the Samsung boot animation.
Thanks
Eldho Thomas
Click to expand...
Click to collapse
Yes..just flash another kernel or flash stock rom via odin..and you are done.simple
Sent from my GT-S6102 using xda app-developers app
Need To Change The Kernel
eldhothomas said:
I recently installed GingerIceJelly custom ROM on my Galaxy Y Duos GT-S6102. It added a boot image (that is displayed even before the recovery menu when I boot in a recovery mode). I later reverted back to my stock ROM, but the boot image still remains. I had thought it was part of the GingerIceJelly ROM, but apparently not. If it is not part of the kernel, where is it?
Is there a way to remove it?
Thanks
Eldho Thomas
Click to expand...
Click to collapse
Yes you can remove it for this you have to change the kernel of your phone i would recommend to use iduos 1.2.1 as it is very stable with no bugs
Hope this Helps you.
---------- Post added at 09:33 AM ---------- Previous post was at 09:19 AM ----------
Please Give Solution For The Following Problems :-
1. Bluetooth, Wi-Fi, Data, Wi-Fi Hotspot Not Working Together.
2. Lockscreen Menu Is Of No use There Is No Change In The Lockscreen.
3. Scrolling Is Not Working properly In The Whole UI Need To Swype In The Opposite direction to stop the Scrolling.
4. GIJ Tweak Style Shop BootAnimations, Tweaks AD-HOC.zip Is Not Flashing Says
Error Flashing
(status:0)
5. OTA Updater Not Workig Says "Invalid Rom"
Due To These Problem I Can't say that it is a stable Custom Rom
I Dont't know that these problems are general or are Only happening to My Phone But Please Tell Me The Solutions.
Tech Knowns said:
Yes you can remove it for this you have to change the kernel of your phone i would recommend to use iduos 1.2.1 as it is very stable with no bugs
Hope this Helps you.
---------- Post added at 09:33 AM ---------- Previous post was at 09:19 AM ----------
Please Give Solution For The Following Problems :-
1. Bluetooth, Wi-Fi, Data, Wi-Fi Hotspot Not Working Together.
2. Lockscreen Menu Is Of No use There Is No Change In The Lockscreen.
3. Scrolling Is Not Working properly In The Whole UI Need To Swype In The Opposite direction to stop the Scrolling.
4. GIJ Tweak Style Shop BootAnimations, Tweaks AD-HOC.zip Is Not Flashing Says
Error Flashing
(status:0)
5. OTA Updater Not Workig Says "Invalid Rom"
Due To These Problem I Can't say that it is a stable Custom Rom
I Dont't know that these problems are general or are Only happening to My Phone But Please Tell Me The Solutions.
Click to expand...
Click to collapse
post the same in original thread..
U will get better ans.plus,it would be helpful for other users too
Sent from my GT-S6102 using xda app-developers app
Tech Knowns said:
Yes you can remove it for this you have to change the kernel of your phone i would recommend to use iduos 1.2.1 as it is very stable with no bugs
Hope this Helps you.
---------- Post added at 09:33 AM ---------- Previous post was at 09:19 AM ----------
Please Give Solution For The Following Problems :-
1. Bluetooth, Wi-Fi, Data, Wi-Fi Hotspot Not Working Together.
2. Lockscreen Menu Is Of No use There Is No Change In The Lockscreen.
3. Scrolling Is Not Working properly In The Whole UI Need To Swype In The Opposite direction to stop the Scrolling.
4. GIJ Tweak Style Shop BootAnimations, Tweaks AD-HOC.zip Is Not Flashing Says
Error Flashing
(status:0)
5. OTA Updater Not Workig Says "Invalid Rom"
Due To These Problem I Can't say that it is a stable Custom Rom
I Dont't know that these problems are general or are Only happening to My Phone But Please Tell Me The Solutions.
Click to expand...
Click to collapse
1. I have not seen wifi and data network working together as soon as there is wifi data network is automatically switched off...
2 don't know sorry u can ask the developer
3.i guess it's got something to do with the scrolling hack u can again contact the developer for this..
4. is is usually caused by an incompatible update-binary in edify ZIPs. Replacing it with a compatible one, then re-signing the ZIP, will usually fix this error. Our another way ask the Dev or is not for your phone..
5.probably because you have modified the build. Prop file in system /
:thumbup:
Sent from my GT-S5360 using xda app-developers app
Precision...
Hey,
Can you be bit more precise..We have not tried that GingerIceJelly rom so you should be able to tell the problem clearly maybe uploading an Image will be appreciable.Ok here is what i know that i thought of sharing with you.
When the phone's power is turned on the bios boots the phone to bootloader which Runs the kernel from it.And while the kernel modules are inserted,the phone now loads the rom.
So you now know where the problem is.
yes Download the bootloader and flash it.
Get your odin flashable stock and flash BCMboot.img or some file which only contains bootloader.
If you want to try changing your bootanimation click here
Thanks,
optimus
Tech Knowns said:
Yes you can remove it for this you have to change the kernel of your phone i would recommend to use iduos 1.2.1 as it is very stable with no bugs
Hope this Helps you.
---------- Post added at 09:33 AM ---------- Previous post was at 09:19 AM ----------
Please Give Solution For The Following Problems :-
1. Bluetooth, Wi-Fi, Data, Wi-Fi Hotspot Not Working Together.
2. Lockscreen Menu Is Of No use There Is No Change In The Lockscreen.
3. Scrolling Is Not Working properly In The Whole UI Need To Swype In The Opposite direction to stop the Scrolling.
4. GIJ Tweak Style Shop BootAnimations, Tweaks AD-HOC.zip Is Not Flashing Says
Error Flashing
(status:0)
5. OTA Updater Not Workig Says "Invalid Rom"
Due To These Problem I Can't say that it is a stable Custom Rom
I Dont't know that these problems are general or are Only happening to My Phone But Please Tell Me The Solutions.
Click to expand...
Click to collapse
1. all radio problem will be fixed in ota update about 2 or 3 days again...
2. this uncomplete project
3. this in no bug!!! but NEW SMOOTH SCROLING METHOD by official firmware DXLK2... actually in DXMA1 scroling method back to old.. but i like this scroling mthod. so, i keep this....
4. will be fixed to.... TweakStyleShop update will be deferent file with ROM OTA-UPDATE... you will need update booth of them..
5. its normally... IT FOR squential update features....
because no ID updatefile that matched...dont worry if any update you will received that, so, it not error or bug.,
Editing plat text
You need to decompile framework.har inside that in a folder is a file named platlogo go inside that there is that line edit it compile the jar you are done

[rom][4.4.2] miui

Just sharing with you , if anybody is interested, a Beta version of MIUI for the OnePlus One.​
I flashed it successfully on my International OnePlus One and am running it right now.
ALL CREDITS GO TO ID这么难么的个人空间 (miui.com developer). You can see the original thread here:
http://www.miui.com/thread-1849318-1-1.html
My changes :
- removed Chinese apps
- removed Sougou keyboard and Baidu apps
- added Sony Keyboard
- a few minor build.prop changes
- ROM is already rooted, the MIUI permission manager works perfectly
How to flash :
1. Download : MIUI 2.0 BETA
and copy to your phones storage
2. Download the Gapps package and copy to your phones storage
3. Unlock bootloader and acquire custom recovery from here: https://forums.oneplus.net/threads/guide-oneplus-one-how-to-unlock-bootloader-install-custom-recovery-and-root.64487/
4. Reboot into recovery
5. Wipe data, cache, dalvik cache and sytem
6. Install OnePlus_MIUI2.0_BETA.zip
7. Reboot your phone and setup the MIUI account
8. Restart back into recovery and flash Gapps
9. Wipe Cache and Dalvik
10. Reboot into system
11. Enjoy MIUI
Screenshots (Mega folder link)​
Thank's to : http://techpunked.wordpress.com/
Just an FYI... On the latest TWRP this takes a long time to flash... waited almost 5 minutes for the flash to finish...
Yvan12 said:
Just sharing with you , if anybody is interested, a Beta version of MIUI for the OnePlus One.​
I flashed it successfully on my International OnePlus One and am running it right now.
ALL CREDITS GO TO ID这么难么的个人空间 (miui.com developer). You can see the original thread here:
http://www.miui.com/thread-1849318-1-1.html
My changes :
- removed Chinese apps
- removed Sougou keyboard and Baidu apps
- added Sony Keyboard
- a few minor build.prop changes
- ROM is already rooted, the MIUI permission manager works perfectly
How to flash :
1. Download OnePlus_MIUI2.0_BETA.zip and copy to your phones storage
2. Download the Gapps package and copy to your phones storage
3. Unlock bootloader and acquire custom recovery from here: https://forums.oneplus.net/threads/guide-oneplus-one-how-to-unlock-bootloader-install-custom-recovery-and-root.64487/
4. Reboot into recovery
5. Wipe data, cache, dalvik cache and sytem
6. Install OnePlus_MIUI2.0_BETA.zip
7. Reboot your phone and setup the MIUI account
8. Restart back into recovery and flash Gapps
9. Wipe Cache and Dalvik
10. Reboot into system
11. Enjoy MIUI
Screenshots (Mega folder link)​
Thank's to : http://techpunked.wordpress.com/
Click to expand...
Click to collapse
Beautiful, thanks!
Will download now..thanx !!
Sent from my One using XDA Premium 4 mobile app
livito said:
Beautiful, thanks!
Click to expand...
Click to collapse
Please don't quote OP...
Sent from my One using XDA Premium 4 mobile app
Why is this in General instead of Android Dev?
Nice to see more ROMs on the OPO.
Nice op, thank you. Have you tried going back to CM11S or restoring from a CM11S NAND backup? I'm just wondering if you ran any to any issues going back and forth between this rom. Thanks
My phone stuck at 1+1 logo,cannot boot with miui,,already tried flash using twrp & philz cwm..now revert back to cm11s
Sent from my One using XDA Premium 4 mobile app
It works perfect on my phone. I'm just curious how updates will be handled.
Sent from my One using Tapatalk
Sir,can u explain to me what recovery u use?u are using bacon or a0001?
Sent from my One using XDA Premium 4 mobile app
I'm using the official TWRP.
Sent from my One using Tapatalk
On OPO Global Version
TWRP 2.7.1.0
Stock Kernel
coming from CM11S, Smooth as butter no problems so far.:good:
---------- Post added at 11:04 PM ---------- Previous post was at 10:52 PM ----------
synergeticink said:
Nice op, thank you. Have you tried going back to CM11S or restoring from a CM11S NAND backup? I'm just wondering if you ran any to any issues going back and forth between this rom. Thanks
Click to expand...
Click to collapse
Did Nand Restore to CM11S, No problemo.:good:
zephiK said:
Why is this in General instead of Android Dev?
Nice to see more ROMs on the OPO.
Click to expand...
Click to collapse
It's because it's a repost of a ROM found somewhere else on the internet and not the work of OP himself, also the text of OP is copied from that blogpost he is referring to.
Nand restore works perfectly people !!!
Installed..works perfect.. Anyway to get the cm11s camera apk?
marliv said:
Installed..works perfect.. Anyway to get the cm11s camera apk?
Click to expand...
Click to collapse
Yeah. Just grab CameraNext.apk from Apps/Themes Section and install it normally. Worked for me.
I have one major problem with this ROM (and specifically with MIUI). I can't get Bluetooth working in my Ford Focus. I get it to intially connect, but then Bluetooth on the phone force closes. I've had issues with this in the past with MIUI, so I don't know how to fix it. :\
*edit*
Found the fix. Stupid easy.
Sent from my SM-T900 using Tapatalk
Nxpx said:
Nand restore works perfectly people !!!
Click to expand...
Click to collapse
After nand restore are you getting any errors with Wifi, my wifi connectivity is good but when i go into the wifi setting its FCing.
EDIT: Never mind, the FC problem was from something else.
darkjedi said:
I have one major problem with this ROM (and specifically with MIUI). I can't get Bluetooth working in my Ford Focus. I get it to intially connect, but then Bluetooth on the phone force closes. I've had issues with this in the past with MIUI, so I don't know how to fix it. :\
*edit*
Found the fix. Stupid easy.
Click to expand...
Click to collapse
I always think when people answer there own question its a good idea to post the fix, to help others with potentially the same issue.
darkjedi said:
I have one major problem with this ROM (and specifically with MIUI). I can't get Bluetooth working in my Ford Focus. I get it to intially connect, but then Bluetooth on the phone force closes. I've had issues with this in the past with MIUI, so I don't know how to fix it. :\
*edit*
Found the fix. Stupid easy.
Sent from my SM-T900 using Tapatalk
Click to expand...
Click to collapse
Could you share the fix with the rest of us?
---------- Post added at 12:46 PM ---------- Previous post was at 12:38 PM ----------
dansou901 said:
Yeah. Just grab CameraNext.apk from Apps/Themes Section and install it normally. Worked for me.
Click to expand...
Click to collapse
Thx..installed,works great.. Installed screencast also working good..if u want xposed use wsm tools

[Q&A] [ROM][5.0 Lollipop] AOSP build

Q&A for [ROM][5.0 Lollipop] AOSP build
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.0 Lollipop] AOSP build. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
How to come back after flashing lollipop on n4?
I flashed this rom http://forum.xda-developers.com/nexus-4/orig-development.
Now I'm without root and recovery, what should I do for restoring the nandroid, or stock rom?:crying:
If somebody has an Android Wear device, can they test if persisting notifications like Play Music/Soundcloud show up on the watch? Thanks!
If somebody has an Android Wear device, can they test if persisting notifications like Play Music/Soundcloud show up on the watch? Thanks, desperate to know if this is fixed in b21.
Please help me! I ve installed this rom and now i can t go to recovery .it seems not installed!
Sent from my AOSP on Mako using XDA Free mobile app
Nc_ said:
I flashed this rom http://forum.xda-developers.com/nexus-4/orig-development.
Now I'm without root and recovery, what should I do for restoring the nandroid, or stock rom?:crying:
Click to expand...
Click to collapse
First of all you need to reboot in fastboot mode (turn off, after that press volume up + volume down + power).
When you are in that mode, you can flash your recovery with the command fastboot flash recovery <recovery image>
For root you should download the last SuperSU from chainfire (you cand find it here : http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133) and flash it via recovery.
Thats is all ! Enojoy Lollipop !
---------- Post added at 05:28 PM ---------- Previous post was at 05:16 PM ----------
fhf758 said:
Please help me! I ve installed this rom and now i can t go to recovery .it seems not installed!
Sent from my AOSP on Mako using XDA Free mobile app
Click to expand...
Click to collapse
That because this new AOSP automaticaly install the stock recovery.
You should reinstall it manualy !
I think next rom build will fix that or install B21 from @sykopompos (http://forum.xda-developers.com/nexus-4/development/lpv-79-mako-port-beta-t2807446)
Thank you!
Sent from my AOSP on Mako using XDA Free mobile app
---------- Post added at 05:39 PM ---------- Previous post was at 05:35 PM ----------
Should the recovery ne in .IMG format?
Sent from my AOSP on Mako using XDA Free mobile app
Is the German language in this AOSP available?
Can i do it whithout a computer?
Sent from my AOSP on Mako using XDA Free mobile app
When i flash from TWRP i receive the No OS Installed message, it's normal?
I used a modified gapps from the lpv thread and it seemed to work ok, the whole thing, its really beautiful.
However, unusable.
I did a dirty upgrade from CM11, and now play services won't work, and process.android.media keeps crashing. I mean i get error messages every few seconds. Can't even install logcat. Any ideas, besides formatting the whole thing and starting over?
Vegeta3gfx said:
Is the German language in this AOSP available?
Click to expand...
Click to collapse
Yes, the german language still alredy avaiable.
fhf758 said:
Can i do it whithout a computer?
Click to expand...
Click to collapse
No, because the rom isn't already rooted and you cannot use app still need root access.
Gabrielqoc said:
When i flash from TWRP i receive the No OS Installed message, it's normal?
Click to expand...
Click to collapse
I've install TWRP 2.8.1.0 and, after wipe/factory reset, i've install the rom B21 with chainfire 2.19 supersu and fix for calendar sync.
---------- Post added at 10:43 PM ---------- Previous post was at 10:37 PM ----------
zyenide said:
I used a modified gapps from the lpv thread and it seemed to work ok, the whole thing, its really beautiful.
However, unusable.
I did a dirty upgrade from CM11, and now play services won't work, and process.android.media keeps crashing. I mean i get error messages every few seconds. Can't even install logcat. Any ideas, besides formatting the whole thing and starting over?
Click to expand...
Click to collapse
That rom (B21), should be install from clean status only.
Mostly that rom contain alredy the minimal gapps, the other can be install by Play Store.
Personally this rom work perfectly
Here my phone
Cannot Download
I can't download from the link, it say too many user have to wait 24 hour, but till now still cannot.
Have other link to get this ?????
Battery
Does the Battery-Bug from 5.0 concerns Nexus 4 devices?
Gapps cm 4.4.3
I installed CM4.4.3 Gapps didn't modify anything and its working just fine. The play store took some time to come up on the first try. I'm using all the google apps with now problems so far.
LainX said:
That because this new AOSP automaticaly install the stock recovery.
You should reinstall it manualy !
I think next rom build will fix that
Click to expand...
Click to collapse
No, there is no recovery in the update.zip. I have flashed about 10 times today and I still have my good old TWRP 2.7.0.0.
fhf758 said:
Can i do it whithout a computer?
Click to expand...
Click to collapse
If you already have TWRP or CWM installed (or your phone is rooted): yes. It might even work with stock recovery, but I haven't tested.
Gabrielqoc said:
When i flash from TWRP i receive the No OS Installed message, it's normal?
Click to expand...
Click to collapse
No. Something went wrong. Follow exactly each step of the new instructions.
zyenide said:
I used a modified gapps from the lpv thread and it seemed to work ok, the whole thing, its really beautiful.
However, unusable.
I did a dirty upgrade from CM11, and now play services won't work, and process.android.media keeps crashing. I mean i get error messages every few seconds. Can't even install logcat. Any ideas, besides formatting the whole thing and starting over?
Click to expand...
Click to collapse
I messed around with FCs the whole day and finally gave up my dirty flash.
LainX said:
No, because the rom isn't already rooted and you cannot use app still need root access.
Click to expand...
Click to collapse
There's a new version with root support. Unfortunately, none of my root apps is compatible with Lollipop so far
mykhyeo said:
I can't download from the link, it say too many user have to wait 24 hour, but till now still cannot.
Have other link to get this ?????
Click to expand...
Click to collapse
I've re-uploaded all file to MEGA.
DieserTii said:
Does the Battery-Bug from 5.0 concerns Nexus 4 devices?
Click to expand...
Click to collapse
I don't think so, it's a different chipset.
root
I forgot to root it, now I cannot boot to recovery mode anymore. Is there anyone know how to root my phone?
honorigami said:
I forgot to root it, now I cannot boot to recovery mode anymore. Is there anyone know how to root my phone?
Click to expand...
Click to collapse
You can always boot to recovery. Just press and hold power and vol down (when powered off).

Best available stable ROM?

Hi everyone,
I am currently running ResurrectionRemix ROM 6.0.1 Marshmallow. However, I'm having a lot of issues with it. As I have said in another topic my apps constantly crash. Also, my phone randomly reboots about 3 times a day. My Google Mapps isn't working very well either.
Therefore, I'm looking for another ROM. I'm pretty much a noob, so I don't really know what my best options are. I see that most ROMs now are for Lollipop, is there a big difference between Marshmallow and Lollipop?
If you guys could share your opinion about the best ROM, and most importantly stable wise, that would be very much appreciated. I don't really need that much options, I just want it to work well and fast. Also, one that doesn't drain my battery in no time would be nice.
Hope to hear from you!
I have not tried many yet but fortunately so far have had good luck with ressurection remix, you might want to try temaseks cm13 rom, as that seemed stable from the limited usage I had with it. But it might help people in giving recommendations if you gave a preference of touchwiz or non touchwiz (although it seems like you prefer stock).
Sorry I couldn't give more help.
Chris
cmro said:
I have not tried many yet but fortunately so far have had good luck with ressurection remix, you might want to try temaseks cm13 rom, as that seemed stable from the limited usage I had with it. But it might help people in giving recommendations if you gave a preference of touchwiz or non touchwiz (although it seems like you prefer stock).
Sorry I couldn't give more help.
Chris
Click to expand...
Click to collapse
Thanks for the reply. I actually found the Audax ROM which I've read a lot of positive things about. There's just one thing I don't understand (and I can't ask in that thread cause I don't have 10 posts yet lol). It says in instructions:
Download Rom and control MD5: (a6031473f6378a58555880af9ca65290)
Do you know what 'control MD5' means? Before this ROM I just flashed ROMs by doing a clean wipe and then just installing the ROM.. Never heard about MD5 before..
Deleted
Ma3lish said:
Thanks for the reply. I actually found the Audax ROM which I've read a lot of positive things about. There's just one thing I don't understand (and I can't ask in that thread cause I don't have 10 posts yet lol). It says in instructions:
Download Rom and control MD5: (a6031473f6378a58555880af9ca65290)
Do you know what 'control MD5' means? Before this ROM I just flashed ROMs by doing a clean wipe and then just installing the ROM.. Never heard about MD5 before..
Click to expand...
Click to collapse
MD5 is just an encryption type used in zip files. ROMs and System files will have MD5 codes(provided by uploaders) so that we can verify MD5 of downloaded files with source files. We can find if downloads are corrupt or missing any bit of data
---------- Post added at 09:41 PM ---------- Previous post was at 09:41 PM ----------
And AryaMod ROM is my choice. It has ROM control app with loads of MODs. Also comes with Option to choose Stock or Idle Kernel (Power saving)
nijom said:
MD5 is just an encryption type used in zip files. ROMs and System files will have MD5 codes(provided by uploaders) so that we can verify MD5 of downloaded files with source files. We can find if downloads are corrupt or missing any bit of data
---------- Post added at 09:41 PM ---------- Previous post was at 09:41 PM ----------
And AryaMod ROM is my choice. It has ROM control app with loads of MODs. Also comes with Option to choose Stock or Idle Kernel (Power saving)
Click to expand...
Click to collapse
I see, thanks. I actually tried to install Audax, but that went not exactly according to plan lol. I installed and got stuck with a message about Aroma Installer. Brainless me accidentely deleted my back-up from my SD-card so there I was with a useless piece of plastic. I am now installing the stock ROM with help from Odin, so if everything goes well it'll work soon again.
Now I'm a bit hesistant with trying a new custom ROM... I don't know why it kept getting stuck with the Aroma Installer message.. :/
You shouldn't overload apps in Aroma. Thats why it gets stuck there at times.
Few users select more apps than the system partition can hold.
Ma3lish said:
I see, thanks. I actually tried to install Audax, but that went not exactly according to plan lol. I installed and got stuck with a message about Aroma Installer. Brainless me accidentely deleted my back-up from my SD-card so there I was with a useless piece of plastic. I am now installing the stock ROM with help from Odin, so if everything goes well it'll work soon again.
Now I'm a bit hesistant with trying a new custom ROM... I don't know why it kept getting stuck with the Aroma Installer message.. :/
Click to expand...
Click to collapse
Were you not able to mount the phone over USB whilst in recovery meaning you could put the zip for a working ROM onto the phone and install that?
i have SM-N900L. will the Phronesis Rom wok on my phone?
Ardie009 said:
i have SM-N900L. will the Phronesis Rom wok on my phone?
Click to expand...
Click to collapse
Your phone is full supported mate ! Enjoy the best rom you ever seen
Aryamod no doubt.
Sent from my SM-N9005 using XDA Free mobile app
Markofree said:
Your phone is full supported mate ! Enjoy the best rom you ever seen
Click to expand...
Click to collapse
just tried it lately.. so smooth room.. no problem encountered.. thanks mate :good:
I am having international exynos version running kitkat..
Will phronesis rom work for me and should i upgrade to lollipop for installing phronesis rom
---------- Post added at 09:12 PM ---------- Previous post was at 09:10 PM ----------
Somebody help me with an answer.. I am a big noob.. Just bought note 3 international version.. Feeling battery is bit low
QUOTE=drarunmmc;64899305]I am having international exynos version running kitkat..
Will phronesis rom work for me and should i upgrade to lollipop for installing phronesis rom
---------- Post added at 09:12 PM ---------- Previous post was at 09:10 PM ----------
Somebody help me with an answer.. I am a big noob.. Just bought note 3 international version.. Feeling battery is bit low[/QUOTE]
Your is SM-N900 and Phronesis desn't work on this model !
Funny, out of all the popular roms here, I am on the resurrection remix rom right now and it is running flawlessly on my Canadian n900w8. Someone mentioned temesak cm 13 but I wouldn't recommend it. I installed it and my phone kept freezing up and rebooting. I would give temesak's cm 12.1 a try.
I has AryaMod V8.1, everything is perfect I only have two problems, if the screen is at rest notifications are not activated and the setting crashes sometimes
shekaky0 said:
I has AryaMod V8.1, everything is perfect I only have two problems, if the screen is at rest notifications are not activated and the setting crashes sometimes
Click to expand...
Click to collapse
If you're coming from anything other than Stock ROM, you'll have to flash a Stock ROM, update BL and CP and then flash AryaMod. Else there'll be crashes
I'm on AryaMod. so smooth, no crashes. For me it's perfect. Just one issue: can't type with bluetooth keyboard. I can pair it, but there is no input... Idk why. Still searching for a fix. I don't want to go back to 4.4.4.
I prefer the Unofficial CyanogenMod 13.0 ROM which is stable and runs smoothly on my phone. If you calibrate your battery after flashing a new rom it will last longer.
iNette
I recommed you cm11 kitkat!

My list of compiled Roms for Motorola Xoom

This is the forum for the roms I compile for Motorola Xoom.
I have nicknamed these future roms Moto-Rola for personal reasons. xD
I will try to make them faster and put some cute things on them, even if I start with KitKat versions.
As you all know, I am currently using some of Schischu's sources, I am just following his hard work and making it available for everyone.
This first rom is the Cyanogenmod 11 version for Motorola Xoom Wingray you already know.
I will compile next the Everest version, you will have to try it for me if I am able to do it. I do not have the everest version of the Motorola Xoom so...
https://www.dropbox.com/sh/1fxrnv2ce8fyjyn/AABHGMZcGCYBYqtDSvMMpXC-a?dl=0
Here are the links (up here) It is a dropbox folder with everything you need.
TWRP 3.0.1 recovery with sdcard support.
CM11 for wingray
Open gapps Kitkat pico version
Open gapps Kitkat nano version
Supersu.
Omnirom 4.4.4.
Thank you for your support!
XDA:DevDB Information
Moto-Rola ROMS, ROM for the Motorola Xoom
Contributors
Manuellama
Source Code: https://github.com/Manuellama/android/blob/android-4.4/default.xml
ROM OS Version: 4.4.x KitKat
ROM Firmware Required: BigParted Recovery
Based On: CyanogenMod 11
Version Information
Status: Stable
Current Stable Version: 4.4.4
Stable Release Date: 2017-05-06
Created 2017-05-06
Last Updated 2018-01-20
Guys with wingray should tell us if they encounter problems. I have the everest, and can't try this.
I am grabbing this to try and get my winray going for the young bloke. I'll report back
---------- Post added at 10:39 AM ---------- Previous post was at 10:18 AM ----------
loaded up fine.. but I didn't do the google account or anything as I figured I'd have to get the "fixed" apk for google play services - but installed version is 11.0.38 - I'll do a factory reset and try a full setup
It works ok with the gapps included in the folder.
RaZz0Raus1980;72197561[/COLOR said:
loaded up fine.. but I didn't do the google account or anything as I figured I'd have to get the "fixed" apk for google play services - but installed version is 11.0.38 - I'll do a factory reset and try a full setup
Click to expand...
Click to collapse
What is this fixed apk that you are talking about please?
My Xoom is getting some gaaps stopped, google services stopped, etc that is driving me insane.
---------- Post added at 10:33 PM ---------- Previous post was at 09:50 PM ----------
RaZz0Raus1980 said:
I am grabbing this to try and get my winray going for the young bloke. I'll report back
---------- Post added at 10:39 AM ---------- Previous post was at 10:18 AM ----------
loaded up fine.. but I didn't do the google account or anything as I figured I'd have to get the "fixed" apk for google play services - but installed version is 11.0.38 - I'll do a factory reset and try a full setup
Click to expand...
Click to collapse
Manuellama said:
It works ok with the gapps included in the folder.
Click to expand...
Click to collapse
FWIW:
Manuellama you are a legend.
I installed these gaaps after a reinstall of cm11 and it does work great indeed. No more stopped services bull***
Thank you so much. I was so upset about loosing my Xoom. I have an Nvidia shield k1 but the Xoom is still a great device to have around.
munecito said:
What is this fixed apk that you are talking about please?
My Xoom is getting some gaaps stopped, google services stopped, etc that is driving me insane
Click to expand...
Click to collapse
Yep - flashed those files and seems 100% perrrrfect
Hi guys, thanks for the new build!
I would like a question, do I have to follow the procedures to in "BigPart Repartition Upgrade and Resource Center by realjumy" to format for bigpart?
I have a xoom GEDfied - It had a google official release. I am not sure if it was a UMTS or CDMA device before - it has a simcard slot.
I have tried the big part process many times and with no success - in the end, when flashing the CM 11 image, it says it is not a big part device... Is it because I am using wingray images?
Thanks very much!
In the dropbox folder there is a recovery you can flash, TWRP 3.0.1. with sdcard support...I suppose you need the bigpart thing to flash it.
But here it is how they did it for bigpart.
https://forum.xda-developers.com/showthread.php?t=2506997
Manuellama said:
In the dropbox folder there is a recovery you can flash, TWRP 3.0.1. with sdcard support...I suppose you need the bigpart thing to flash it.
But here it is how they did it for bigpart.
https://forum.xda-developers.com/showthread.php?t=2506997
Click to expand...
Click to collapse
Yeah, I have already tried that tutorial (like 10 times) for bigpart, no success.
Maybe it is something with my hardware (I am not sure if it is gsm, cdma or wifi) - everybuild I try says I don't have bigpart partitioning.
I will wait for an everest build
jubarim said:
Yeah, I have already tried that tutorial (like 10 times) for bigpart, no success.
Maybe it is something with my hardware (I am not sure if it is gsm, cdma or wifi) - everybuild I try says I don't have bigpart partitioning.
I will wait for an everest build
Click to expand...
Click to collapse
The easier way to know what variant is your Xoom is to check the model number at the back.
The problem you are going to have with most of the late builds is that they need big partition. So you need to find the easy to partition your tablet.
munecito said:
The easier way to know what variant is your Xoom is to check the model number at the back.
The problem you are going to have with most of the late builds is that they need big partition. So you need to find the easy to partition your tablet.
Click to expand...
Click to collapse
I will attach a picture here, I have not found the variant, I guess it is a prototype unit.
Yeah, bigpart is necessary...
https://goo.gl/photos/y8rQj2rNzU2d78PR9
@jubarim See that? My model number is mz601 (Everest) check your model number at the back of the tablet.
Thanks munecito! Mine don't have this sticker, I will post a picture tonight.
Well. It will help if you tell us if yours is a wifi only model, LTE? Where did you buy it (country)? Does it have a branded rom installed? Anything at all to identify it.
---------- Post added at 10:14 PM ---------- Previous post was at 10:08 PM ----------
kerry_xu_cs
12-02-2012, 10:47 AM |#10
Member68 posts Thanks: 13
boot into fastboot mode
plug your usb
use
fastboot getvar all
command to check the model
Uploading everest build to the dropbox folder.
I am not 100% sure it will work, but please try it and tell me.
It will take 1 or 2 hours to upload so now it is still not there.
Manuellama said:
Uploading everest build to the dropbox folder.
I am not 100% sure it will work, but please try it and tell me.
It will take 1 or 2 hours to upload so now it is still not there.
Click to expand...
Click to collapse
About 4 hours later and still not showing. Maybe the upload was interrupted.
Can't wait to try it.:good:
My internet failed, I will upload it now.
Everest uploaded.
I think it will work, but I am not 100% since I do not have an everest xoom.
Please try it, tell me if it works so I can put it on the main post.
I am going to test Everest. But I have a problem:
In the BigPart Repartition thread they say the following:
Put all needed resources on your microsd card! You will need the original TWRP 2.6.3.0 touch recovery from @runandhide05, TWRP 2.6.3.0 BigPart version, your desired rom, and the BigPart boot image that goes with your desired rom. The BigPart boot images can be found in the next section.
Click to expand...
Click to collapse
So what versions of TWRP do I put on the SD card? The one from the beginning of the thread is BigPart version?
It is the Schischu TWRP 3.0.1 recovery with added sd card support. I always do
Fastboot flash recovery recovery.img
If recovery.img is the name of the recovery image.
I cannot guarantee it works.

Categories

Resources