Related
My Nexus 6P is rooted and running Android Marshmallow (6.0.1) (supposed to be systemless but not sure anymore)
I have unlocked the bootloader and have twrp as my recovery.
I have exposed framework with some modules installed and working (notification bar clock now shows the seconds and stuff like that....)
So I recently got my Nexus 6p and the first thing I did was root and install twrp via adb and fast boot so I could use exposed framework. I would like to know what my options are in receiving ota updates? I have the Android security patch from January 1, 2016 and I just got an Android system update notification that includes a newer security patch from February and I'm not sure if I can get a specific ota that is flashable through twrp or if I'll need to back up my stuff and flash stock or if there's an easier way to do this because I'd prefer to not have to set up everything all over again.
If you need me to provide any further information about my device just tell me.
---
I'm currently on build MMB29P and I have checked the Google dev page on Factory Images for Nexus Devices
And apparently MHC19I is the newest.
use flashfire
http://nexus5.wonderhowto.com/how-t...thout-losing-root-no-computer-needed-0168428/
fireeyeeian said:
My Nexus 6P is rooted and running Android Marshmallow (6.0.1) (supposed to be systemless but not sure anymore)
I have unlocked the bootloader and have twrp as my recovery.
I have exposed framework with some modules installed and working (notification bar clock now shows the seconds and stuff like that....)
So I recently got my Nexus 6p and the first thing I did was root and install twrp via adb and fast boot so I could use exposed framework. I would like to know what my options are in receiving ota updates? I have the Android security patch from January 1, 2016 and I just got an Android system update notification that includes a newer security patch from February and I'm not sure if I can get a specific ota that is flashable through twrp or if I'll need to back up my stuff and flash stock or if there's an easier way to do this because I'd prefer to not have to set up everything all over again.
If you need me to provide any further information about my device just tell me.
---
I'm currently on build MMB29P and I have checked the Google dev page on Factory Images for Nexus Devices
And apparently MHC19I is the newest.
Click to expand...
Click to collapse
I have all the OTA zips listen in my index. As previously mentioned you can use Flashfire to flash them without having to undo your modifications.
But with flashfire you will still lose all of your modifications like xposed apps? You have to redo it all? Anyone have a direct link to the new feb security update?
Heisenberg said:
I have all the OTA zips listen in my index. As previously mentioned you can use Flashfire to flash them without having to undo your modifications.
Click to expand...
Click to collapse
I've used flash fire back on my s4 so this is good but
Should I disable my exposed modules before I flash with flash fire as i can also reinstall exposed along with the ota? It's my First time using exposed because my s4 has a locked bootloader.
squall458 said:
But with flashfire you will still lose all of your modifications like xposed apps? You have to redo it all? Anyone have a direct link to the new feb security update?
Click to expand...
Click to collapse
Downloaded modules should stay intact. However, I am not sure if the OTA update has library changes, that may affect Xposed installation. Anyhow, simply flashing the Xposed Installer zip will suffice.
DJBhardwaj said:
Downloaded modules should stay intact. However, I am not sure if the OTA update has library changes, that may affect Xposed installation. Anyhow, simply flashing the Xposed Installer zip will suffice.
Click to expand...
Click to collapse
Thanked you!
Will the latest google image for the 6p already have the security patch in it? I dont see a changelog or a timestamp so I cant tell if its just the old image.
squall458 said:
Thanked you!
Will the latest google image for the 6p already have the security patch in it? I dont see a changelog or a timestamp so I cant tell if its just the old image.
Click to expand...
Click to collapse
No need to thank, just add this to your knowledge for future reference. That will be more than enough for me.
Which security patch are you talking about, specifically? The latest Google factory image as of now, contains the March security update. You can read a more detailed article here: https://source.android.com/security/bulletin/2016-03-01.html
DJBhardwaj said:
No need to thank, just add this to your knowledge for future reference. That will be more than enough for me.
Which security patch are you talking about, specifically? The latest Google factory image as of now, contains the March security update. You can read a more detailed article here: https://source.android.com/security/bulletin/2016-03-01.html
Click to expand...
Click to collapse
Ok i just used flashfire to update with the image file. Made sure to follow the instructions and even got it to flash xposed for me after.
It all went smoothly. But upon reboot it looked like it was doing an android app update but it stopped and everything seems like it was before. The security update didnt work. Still says january.
squall458 said:
Ok i just used flashfire to update with the image file. Made sure to follow the instructions and even got it to flash xposed for me after.
It all went smoothly. But upon reboot it looked like it was doing an android app update but it stopped and everything seems like it was before. The security update didnt work. Still says january.
Click to expand...
Click to collapse
What did you flash, image files or OTA zip?
DJBhardwaj said:
What did you flash, image files or OTA zip?
Click to expand...
Click to collapse
The system image file. Not the ota one. I got it from the google developer site with my matching build.
squall458 said:
The system image file. Not the ota one. I got it from the google developer site with my matching build.
Click to expand...
Click to collapse
Well then you just flash the system partition only. I would say, flash the OTA zip.
Wait! "with my matching build" ? Which build did you download?
DJBhardwaj said:
Well then you just flash the system partition only. I would say, flash the OTA zip.
Wait! "with my matching build" ? Which build did you download?
Click to expand...
Click to collapse
My build is MMB29P. I got the 6.0.1 matching my build. Did I pick the wrong one?
squall458 said:
My build is MMB29P. I got the 6.0.1 matching my build. Did I pick the wrong one?
Click to expand...
Click to collapse
Yes. You will need to pick MHC19I factory image, and extract the system.img from it. Flash it, and also the vendor.img too.
Every thing worked out I had downloaded the most recent build and exposed installer flashed through flash fire everything seems good so far.
DJBhardwaj said:
Yes. You will need to pick MHC19I factory image, and extract the system.img from it. Flash it, and also the vendor.img too.
Click to expand...
Click to collapse
Ohhh ic! I dont pick my matching build? I just pick the last one which is the latest update?
squall458 said:
Ohhh ic! I dont pick my matching build? I just pick the last one which is the latest update?
Click to expand...
Click to collapse
Picking the current build is simply reflashing it. To update, you will need to flash the system.img from the latest factory image.
---------- Post added at 09:17 PM ---------- Previous post was at 08:59 PM ----------
fireeyeeian said:
Every thing worked out I had downloaded the most recent build and exposed installer flashed through flash fire everything seems good so far.
Click to expand...
Click to collapse
Great.
DJBhardwaj said:
Picking the current build is simply reflashing it. To update, you will need to flash the system.img from the latest factory image.
---------- Post added at 09:17 PM ---------- Previous post was at 08:59 PM ----------
Great.
Click to expand...
Click to collapse
It worked! You are the best. Ppl like you make xda such an awesome forum! Bless you
squall458 said:
It worked! You are the best. Ppl like you make xda such an awesome forum! Bless you
Click to expand...
Click to collapse
People like all of us, you, me, and everyone else, make this a better community. Belonging to different countries and cultures, and we still understand each other very well. :highfive:
Has anyone who downgraded from soak to MM got the update.Did u guys ended up successfully installing the update..Please let me know with ur comments.Iam in soak test 1
downgrade to mm make the update posible
one guy from india say that :
Lucky you Kevin! I updated to Soak test...voided my warranty to return to stock..then again tried a lot of different ROMs...faced bootloops -_-...then decided to come back to Stock again... I'm happy now... Believe me Stay Stock...Stay awesome
Today I received the official Android7 update
The update is the same like the one from Dec 11:
http://forum.xda-developers.com/moto-g4-plus/how-to/captured-ota-nougat-ota-moto-g4-plus-t3517059
BTW: Still no root for it.
SoNic67 said:
The update is the same like the one from Dec 11:
http://forum.xda-developers.com/moto-g4-plus/how-to/captured-ota-nougat-ota-moto-g4-plus-t3517059
BTW: Still no root for it.
Click to expand...
Click to collapse
what about Magisk?
Ivan Fuentes Hagar said:
what about Magisk?
Click to expand...
Click to collapse
Haven't tested it myself but there are reports of magisk not working. You can try and verify though as magisk seems to work on every other platform(even custom 7.1 ones)
eith said:
Today I received the official Android7 update
Click to expand...
Click to collapse
Did you flash any soak test nougat update before getting the official update?
---------- Post added at 06:56 AM ---------- Previous post was at 06:50 AM ----------
Will I get the official update. I flashed soak test nougat update.
SecretKeeper said:
Did you flash any soak test nougat update before getting the official update?
---------- Post added at 06:56 AM ---------- Previous post was at 06:50 AM ----------
Will I get the official update. I flashed soak test nougat update.
Click to expand...
Click to collapse
You might not.
http://www.filefactory.com/file/3lc...RETAILDSDS_6.0_MPB24.65-34-3_cid7_CFC.xml.zip
vrkawin said:
http://www.filefactory.com/file/3lc...RETAILDSDS_6.0_MPB24.65-34-3_cid7_CFC.xml.zip
Click to expand...
Click to collapse
https://mega.nz/#!2FQmhQZT!R0Zy1beSdab36n1l6ru99d9RygME84iN2G3x-WJ7Jrg
What's new in this update?
please upload on google drive
upload it on drive or Mega
GeekyTanuj said:
What's new in this update?
Click to expand...
Click to collapse
-New bootloader (4887);
-August security patch
the phone feels a bit snappier with this new bootloader, running latest oficial lineageos.
Edit: Not sure if placebo or not, but mobile coverage where i'm at seems a bit better too according to battery stats.
MPB24.65-34-3 Easy installer MEGA link
https://mega.nz/#!2FQmhQZT!R0Zy1beSdab36n1l6ru99d9RygME84iN2G3x-WJ7Jrg
Is this is indian.......retin version......??
Or other country version??
gourabpa said:
Is this is indian.......retin version......??
Or other country version??
Click to expand...
Click to collapse
this is indian version
I've unlocked bootloader and my phone is rooted (last stock rom Android 6.0, Build: MPB24.65-34)
Can I flash this update right-away from TWRP?
If yes, I'd appreciate a step by step instruction for flashing this zip via TWRP.
Thank you!
This is not twrp flashable zip.this is fast boot easy installer, simply unzip to your pc and connect mobile your pc with bootloader mode by usb cable and double click easy installer .bat file and follow instructions that's all
Sent from my Moto G 2014 using Tapatalk
vrkawin said:
This is not twrp flashable zip.this is fast boot easy installer, simply unzip to your pc and connect mobile your pc with bootloader mode by usb cable and double click easy installer .bat file and follow instructions that's all
Sent from my Moto G 2014 using Tapatalk
Click to expand...
Click to collapse
Hi, Thanks for the clarification, but I have few more questions:
Q1. Do I have to re-lock the bootloader before doing this?
Q.2 What will be the build version, after flashing this update?
The title of this posts suggests that, after flashing this update it will become 24.65-34-3 (correct me if I'm wrong)
However, I'm already using this version and I'm getting the update notification for version 24.81.3.en.03
Please help!
MiguelPT said:
the phone feels a bit snappier with this new bootloader, running latest oficial lineageos.
Edit: Not sure if placebo or not, but mobile coverage where i'm at seems a bit better too according to battery stats.
Click to expand...
Click to collapse
Bootloader itseft has nothing to do with operational speed.
Lineage is much snappier than CM was. So this might be the key point.
Also I doubt about mobile coverage, because radio version is just the same. Not a single change.
---------- Post added at 01:01 PM ---------- Previous post was at 12:58 PM ----------
whatever7276 said:
Hi, Thanks for the clarification, but I have few more questions:
Q1. Do I have to re-lock the bootloader before doing this?
Q.2 What will be the build version, after flashing this update?
The title of this posts suggests that, after flashing this update it will become 24.65-34-3 (correct me if I'm wrong)
However, I'm already using this version and I'm getting the update notification for version 24.81.3.en.03
Please help!
Click to expand...
Click to collapse
The full version is titan_retaildsds-user 6.0 MPB24.65-34-3 3 release-keysMSM8626BP_1032.3116.99.00R
24.81.3.en.03 is Android (system volume) build version while MPB24.65-34-3 is whole package version
PsyClip-R said:
Bootloader itseft has nothing to do with operational speed.
Lineage is much snappier than CM was. So this might be the key point.
Also I doubt about mobile coverage, because radio version is just the same. Not a single change.
---------- Post added at 01:01 PM ---------- Previous post was at 12:58 PM ----------
The full version is titan_retaildsds-user 6.0 MPB24.65-34-3 3 release-keysMSM8626BP_1032.3116.99.00R
24.81.3.en.03 is Android (system volume) build version while MPB24.65-34-3 is whole package version
Click to expand...
Click to collapse
I already had lineageos before i updated bootloader. It's definitely faster, especially the scrolling, feels more responsive overall.
there is a guide how to root stock rom. Can you tell me?
maximuns said:
-New bootloader (4887);
-August security patch
Click to expand...
Click to collapse
vrkawin said:
this is indian version
Click to expand...
Click to collapse
Sorry but even looking in the https://forum.xda-developers.com/moto-g-2014/general/bootloader-update-t3060007 thread I could not find how to see the current bootloader version and what serious advantages the security patch brings (on XT1068 EU Version).
A litle help. How To root this firmware? Tried to flash SuperSU latest version in twrp latest version and phone stays on bootlogo. Many Thanks
taurelio said:
Tried to flash SuperSU latest version in twrp latest version and phone stays on bootlogo.
Click to expand...
Click to collapse
Did you try 2.79 release or 2.79SR3? Only the SR3 or later is supposed to work fine on Moto device without that echo line for systemless.
taurelio said:
A litle help. How To root this firmware? Tried to flash SuperSU latest version in twrp latest version and phone stays on bootlogo. Many Thanks
Click to expand...
Click to collapse
If u having problem......... with stock rom root then u can follow the link here and see the heading How to ROOT in the 1st page of this link and in the middle area in the 1st post https://forum.xda-developers.com/moto-g-2014/general/moto-g-indian-xt1068-marshmellow-6-0-t3313148
whatever7276 said:
Hi, Thanks for the clarification, but I have few more questions:
Q1. Do I have to re-lock the bootloader before doing this?
Q.2 What will be the build version, after flashing this update?
The title of this posts suggests that, after flashing this update it will become 24.65-34-3 (correct me if I'm wrong)
However, I'm already using this version and I'm getting the update notification for version 24.81.3.en.03
Please help!
Click to expand...
Click to collapse
Did you get the answer of your first question??
Just received a notice that a new Beta version NPG47I is being pushed currently. 328.9MB in size.
Just wanted to give everyone a heads up!
First thing I notice is on start-up there is now a "Powered by Android" at the bottom.
March 5th Security updates.
Thanks​ for the heads up! Having a problem installing. It downloads fine and then fails installing shortly after the installation starts. Probably because I am rooted, but I was rooted when I installed the beta to begin with and it worked fine.
OTA for NPG47I from NPG05E (330MB download)
https://ota.googlezip.net/packages/.../890d20b59c4edeeef494b2bd8ae7830b14fe7df4.zip
Code:
ota-required-cache=0
ota-type=AB
post-build=google/marlin/marlin:7.1.2/NPG47I/3795619:user/release-keys
post-build-incremental=3795619
post-timestamp=1489011460
pre-build=google/marlin/marlin:7.1.2/NPG05E/3638325:user/release-keys
pre-build-incremental=3638325
pre-device=marlin
Verizon?
I decided to load this up from my Verizon version to see what happens. It's a 841.7 MB update (from whatever the latest version was pushed out, I had already missed the boat on first the system update that locked the BL).
What are my options if I'm able to unlock the bootloader while in this beta?
It seems if I un-enroll from the beta, I'll get wiped?
I mainly just want to be able to run a rom and edit my build.prop.
Yes. It will wipe the entire device if you unenroll. I would wait to see if someone builds a custom ROM based off of the new build if your intent is to modify.
se7endust1 said:
I decided to load this up from my Verizon version to see what happens. It's a 841.7 MB update (from whatever the latest version was pushed out, I had already missed the boat on first the system update that locked the BL).
What are my options if I'm able to unlock the bootloader while in this beta?
It seems if I un-enroll from the beta, I'll get wiped?
I mainly just want to be able to run a rom and edit my build.prop.
Click to expand...
Click to collapse
iceman4357 said:
Yes. It will wipe the entire device if you unenroll. I would wait to see if someone builds a custom ROM based off of the new build if your intent is to modify.
Click to expand...
Click to collapse
Well, I'll have to wait for more experienced people to mess with this, if there's anything to do with it. The toggle in my dev options for unlock is still greyed out.
If you un enroll in the beta and accept the OTA to the latest stable then it will wipe your device. If you un enroll then flash the latest stable it should keep your files as long as you take out the -w in the .bat file.
wow nice
If I delete SuperSu, do you guys think I will be able to take the OTA successfully? Its weird because I was rooted when I installed the beta to begin with and had no issues. Just had to root again afterwards.
Does it have the same old Google camera or anything newer?
CZ Eddie said:
Does it have the same old Google camera or anything newer?
Click to expand...
Click to collapse
Same. It actually contains an older build that is updatable via the play store to the current 4.3.016
Couldn't update. I was rooted, did full unroot, but still couldn't update. Anyone have a flashable .zip?
335Deezl said:
Couldn't update. I was rooted, did full unroot, but still couldn't update. Anyone have a flashable .zip?
Click to expand...
Click to collapse
Yeah same here, full unroot and flashed back system boot/recovery and still no go.
Can't do OTA or sideload with ADB
So this image won't be available on Google's server separately? And the stable 7.1.2 is supposedly coming on 3rd April?
Rollback OTA (will wipe the device) for NOF27B from NPG47I
https://ota.googlezip.net/packages/.../33bbd87269a4e7babcd165d2ccbf28136138a6ac.zip
Code:
ota-downgrade=yes
ota-required-cache=0
ota-type=AB
ota-wipe=yes
post-build=google/marlin/marlin:7.1.1/NOF27B/3687361:user/release-keys
post-build-incremental=3687361
pre-build=google/marlin/marlin:7.1.2/NPG47I/3795619:user/release-ke
s
pre-build-incremental=3795619
pre-device=marlin
danw_oz said:
Yeah same here, full unroot and flashed back system boot/recovery and still no go.
Can't do OTA or sideload with ADB
Click to expand...
Click to collapse
I reflashed the factory image of the first 7.1.2 beta from last month and then was able to sideload the ota. no problem.
---------- Post added at 06:18 PM ---------- Previous post was at 06:14 PM ----------
xdatastic said:
Rollback OTA (will wipe the device) for NOF27B from NPG47I
https://ota.googlezip.net/packages/.../33bbd87269a4e7babcd165d2ccbf28136138a6ac.zip
Code:
ota-downgrade=yes
ota-required-cache=0
ota-type=AB
ota-wipe=yes
post-build=google/marlin/marlin:7.1.1/NOF27B/3687361:user/release-keys
post-build-incremental=3687361
pre-build=google/marlin/marlin:7.1.2/NPG47I/3795619:user/release-ke
s
pre-build-incremental=3795619
pre-device=marlin
Click to expand...
Click to collapse
You can manually flash the 7.1.1 factory image without wiping the device.
Factory images are up. Release notes.
---------- Post added at 10:52 AM ---------- Previous post was at 10:48 AM ----------
Well, Android O developer preview images are up as well.
Kisakuku said:
Factory images are up. Release notes.
---------- Post added at 10:52 AM ---------- Previous post was at 10:48 AM ----------
Well, Android O developer preview images are up as well.
Click to expand...
Click to collapse
Am I able to flash this without wiping? I am currently on the first 7.1.2 beta. Can't take the OTA due to being rooted, but unrooting doesn't seem to help either.
Frankie1588 said:
Am I able to flash this without wiping? I am currently on the first 7.1.2 beta. Can't take the OTA due to being rooted, but unrooting doesn't seem to help either.
Click to expand...
Click to collapse
Yes, just remove the '-w' in flash-all.bat.
ok so i flashed just the radio from the latest beta, radio-marlin-8996-012901-1702171013.img, and no signal and baseband unknown when booted in to the O.S. had to update the bootloader to the Beta2 bootloader in order to flash the radio back at all. does anyone have the beta1 image? i loved the radio in it it worked great.
this guy here says he's got the stable 8.1 update
http://en.miui.com/thread-2710415-1-1.html
I have received
rajay1234 said:
I have received
Click to expand...
Click to collapse
u r in beta group
rajay1234 said:
I have received
Click to expand...
Click to collapse
are you beta tester?
rajay1234 said:
I have received
Click to expand...
Click to collapse
ota link plz
---------- Post added at 10:02 AM ---------- Previous post was at 09:58 AM ----------
Actually, OTA link for new update: https://android.googleapis.com/pack.../db9190392239d80aea36db684b14de1c169d3a1e.zip
I am in the leaked BETA version 8.1 (019.8.5.11) and received that OTA update. Making a TWRP package now. @oreo27 here is a new OTA for 8.0
Metadata for new OTA:
ota-required-cache=0
ota-streaming-property-files=payload.bin:1244:1199466095,payload_properties.txt:1199467397:155,care_map.txt:480:717,metadata:69:363
ota-type=AB
post-build=xiaomi/tissot/tissot_sprout:8.0.0/OPR1.170623.026/V9.5.13.0.ODHMIFA:user/release-keys
post-build-incremental=V9.5.13.0.ODHMIFA
post-timestamp=1526973662
pre-device=tissot_sprout
Update: I flashed the update through TWRP and it corrupted my data, now I cannot boot up the phone. Please advise lol.
konradit said:
ota link plz
---------- Post added at 10:02 AM ---------- Previous post was at 09:58 AM ----------
Actually, OTA link for new update: https://android.googleapis.com/pack.../db9190392239d80aea36db684b14de1c169d3a1e.zip
I am in the leaked BETA version 8.1 (019.8.5.11) and received that OTA update. Making a TWRP package now. @0reo27 here is a new OTA for 8.1!
Click to expand...
Click to collapse
working
konradit said:
ota link plz
---------- Post added at 10:02 AM ---------- Previous post was at 09:58 AM ----------
Actually, OTA link for new update: https://android.googleapis.com/pack.../db9190392239d80aea36db684b14de1c169d3a1e.zip
I am in the leaked BETA version 8.1 (019.8.5.11) and received that OTA update. Making a TWRP package now. @oreo27 here is a new OTA for 8.0
Metadata for new OTA:
ota-required-cache=0
ota-streaming-property-files=payload.bin:1244:1199466095,payload_properties.txt:1199467397:155,care_map.txt:480:717,metadata:69:363
ota-type=AB
post-build=xiaomi/tissot/tissot_sprout:8.0.0/OPR1.170623.026/V9.5.13.0.ODHMIFA:user/release-keys
post-build-incremental=V9.5.13.0.ODHMIFA
post-timestamp=1526973662
pre-device=tissot_sprout
Click to expand...
Click to collapse
Can you post the fastboot image please?
Edit: Or give us the link to the direct fastboot images?
atttoush said:
Can you post the fastboot image please?
Edit: Or give us the link to the direct fastboot images?
Click to expand...
Click to collapse
unzip it, unpack the payload and flash using fastboot
konradit said:
unzip it, unpack the payload and flash using fastboot
Click to expand...
Click to collapse
That's a 8.0 though right? Not 8.1
No Stable update but patch of 58.3MB has been pushed as stable update
LIONS1 said:
this guy here says he's got the stable 8.1 update
http://en.miui.com/thread-2710415-1-1.html
Click to expand...
Click to collapse
No Stable update but patch of 58.3MB has been pushed as stable update.
konradit said:
ota link plz
---------- Post added at 10:02 AM ---------- Previous post was at 09:58 AM ----------
Actually, OTA link for new update: https://android.googleapis.com/pack.../db9190392239d80aea36db684b14de1c169d3a1e.zip
I am in the leaked BETA version 8.1 (019.8.5.11) and received that OTA update. Making a TWRP package now. @oreo27 here is a new OTA for 8.0
Metadata for new OTA:
ota-required-cache=0
ota-streaming-property-files=payload.bin:1244:1199466095,payload_properties.txt:1199467397:155,care_map.txt:480:717,metadata:69:363
ota-type=AB
post-build=xiaomi/tissot/tissot_sprout:8.0.0/OPR1.170623.026/V9.5.13.0.ODHMIFA:user/release-keys
post-build-incremental=V9.5.13.0.ODHMIFA
post-timestamp=1526973662
pre-device=tissot_sprout
Update: I flashed the update through TWRP and it corrupted my data, now I cannot boot up the phone. Please advise lol.
Click to expand...
Click to collapse
Use mi flash and go back stock, clean all and lock. But before you flash recover whatever data you can in TWRP
To break it all down, here's what has happened.
8.1 beta gets leaked by someone from Xiaomi.
Non-beta users were able to download it and flashed it on their devices.
Xiaomi gives May update delayed. Already end of May and Mi A1 are just receiving them right now.
May update has 3 stages.
1st is around 80+ mb.
2nd update is at 50+ mb.
3rd May update reverts 8.1 to 8.0.0 for non-beta users. Size is 1+ GB.
konradit said:
ota link plz
---------- Post added at 10:02 AM ---------- Previous post was at 09:58 AM ----------
Actually, OTA link for new update: https://android.googleapis.com/pack.../db9190392239d80aea36db684b14de1c169d3a1e.zip
I am in the leaked BETA version 8.1 (019.8.5.11) and received that OTA update. Making a TWRP package now. @oreo27 here is a new OTA for 8.0
Metadata for new OTA:
ota-required-cache=0
ota-streaming-property-files=payload.bin:1244:1199466095,payload_properties.txt:1199467397:155,care_map.txt:480:717,metadata:69:363
ota-type=AB
post-build=xiaomi/tissot/tissot_sprout:8.0.0/OPR1.170623.026/V9.5.13.0.ODHMIFA:user/release-keys
post-build-incremental=V9.5.13.0.ODHMIFA
post-timestamp=1526973662
pre-device=tissot_sprout
Update: I flashed the update through TWRP and it corrupted my data, now I cannot boot up the phone. Please advise lol.
Click to expand...
Click to collapse
Sorry. It's been really busy for me the past few days. Did you get your device to work?
Also: https://github.com/0reo27/Mi-A1-OTA-to-TWRP/releases