Hey Guys can someone PLEASE help me? I have an FRP lock on my S7 Edge and no matter what I hae trief I can not get rid of this STUPID thing. It is driving me absolutely INSANE!!! PLease there has to be a solution .... PLEASE PLEASE PLEASE Any kind of help will be GREATLY Appreciated... Oh and I have the Galaxy S7 Edge... The Australian model The SM-G935F
Thaanks ... Ryan
Barker to the rescue!
ryanski said:
Hey Guys can someone PLEASE help me? I have an FRP lock on my S7 Edge and no matter what I hae trief I can not get rid of this STUPID thing. It is driving me absolutely INSANE!!! PLease there has to be a solution .... PLEASE PLEASE PLEASE Any kind of help will be GREATLY Appreciated... Oh and I have the Galaxy S7 Edge... The Australian model The SM-G935F
Thaanks ... Ryan
Click to expand...
Click to collapse
Hey Ryan!
I had just spent the last 2 days trying to figure out what the hell I could do to remove the frp lock on my device. After alot of XDA and Youtube browsing I have found a solution, and I guarantee it will work for you! First off, the Google Account FRP lock is different than the Samsung Account Reactivation Lock (Samsung FRP) So if it is asking you to sign into google account, then theres a much easier way around it.
What you need is Z3x Box, You can get the program via PM'ing me, the program does not require you to have a box with it.
You want to then put your phone into download mode (Home key, volume down, and power) While phone is off. Press Vol Up to continue.
Back to Z3x, once you start the program, connect your device
Now once it successfully connects and you choose your phone model (Make sure its the correct one) go to the UNLOCK tab, and select Reset/Frp/React/EE
if successful you will see what is shown in the image link below.
If not, Factory reset / Wipe with the bootloader and go back into download mode.
https://i.imgur.com/5nwGZUy.png
I know this method mention above to work.
Try it and see how it goes.
Related
Hi guys, i've got a little problem, i downloaded kies today and when i connect my phone to it, it says my s5 (900i) is locked, please input password. I have swipe unlock turned on so there is no password....any help would be appreciated.
Thanks in advance.
doctopus said:
Hi guys, i've got a little problem, i downloaded kies today and when i connect my phone to it, it says my s5 (900i) is locked, please input password. I have swipe unlock turned on so there is no password....any help would be appreciated.
Thanks in advance.
Click to expand...
Click to collapse
Not sure what the type of lock does Kies mean.
Anyway try to set the screen lock to None (instead of Swipe)?
Will try thanks
..
Here's the story. I flash my phone and put the firmware in the wrong place. I put the firmware in the BL not in the AP. And now my phone can not enter download mode again and the screen so wierd. Please help me...??
ankouizanami said:
Here's the story. I flash my phone and put the firmware in the wrong place. I put the firmware in the BL not in the AP. And now my phone can not enter download mode again and the screen so wierd. Please help me...
Click to expand...
Click to collapse
Hay, @muniz_ri: Man could you please help me about the same like problem, I have brick my nieces Galaxy Grand Prime G530H, while i was trying to upgrade it to 5.0.2, I did all the things well and ODIN showed PASSED sign on the relevant bar, but the phone didn't boot thereafter,
It only has a light black screen, No download mode, no recovery mode, it starts (as it vibrates & the screen looks like it is not dead totally) and the computer also detects it.
I remember, i had alike problem with a LG G2 but, galaxy devices are quite changed. What can i do please, please help me.
you are a software Guru man and you have figured out many problems even without knowing what has been done with the devices, kindly help me and some others in the line, Please find out some thing. I have searched the xda and googled a lot but couldn't find any help. Thanks a lot.
Hi, i want to fix a phone of my friend by flashing it with odin, but things go wrong, the phone after failing wont start or respond to any button, i dont know what to do, please any help would be appreciated
Samsung Galaxy J1 SM-J100H
Edit:
Thanks xEmre66 for your reply, unfortunately no, i think i break the boot image, the phone wont boot on download mode even if i use 300k jig, i think the only solution is to use an sd card filled with the boot image, but i dont find in website a solution like that.
I tryed many solution but no one work, please if someone have the some problem tell me.
Can you get into the DownloadMode? (ODIN MODE)???
Sent from my SM-J100H using XDA-Developers mobile app
---------- Post added at 08:58 AM ---------- Previous post was at 08:57 AM ----------
I have this phone but it is not my main phone but maybe I can help you.
Sent from my SM-J100H using XDA-Developers mobile app
i'm working on this problem..
i resolved,
share there
OSKCHAST said:
i resolved,
share there
Click to expand...
Click to collapse
Please can you share the solution ?, i cant fix the phone.
same problem here
I have same problem here, samsung j100h of my friend do not boot, i download odin and correct rom to flash i flashed device correctly, but device now is fully dead, display not start, black screen, my win10 not recognise device, now cant flash using odin and using sp_flashtool....
device respond at win10 when i push vol up + power but can't make anything
i try to install all drivers signed and unsigned from samsung and mkt.. nothing works any idea???
caseres84 said:
I have same problem here, samsung j100h of my friend do not boot, i download odin and correct rom to flash i flashed device correctly, but device now is fully dead, display not start, black screen, my win10 not recognise device, now cant flash using odin and using sp_flashtool....
device respond at win10 when i push vol up + power but can't make anything
i try to install all drivers signed and unsigned from samsung and mkt.. nothing works any idea???
Click to expand...
Click to collapse
You broke the boot image. I'm sorry but you hard bricked the device. I had this phone but it was terrible because of its touchscreen. Maybe I could help you. Send me a PM and describe how you really broke the device.
xEmre66 said:
You broke the boot image. I'm sorry but you hard bricked the device. I had this phone but it was terrible because of its touchscreen. Maybe I could help you. Send me a PM and describe how you really broke the device.
Click to expand...
Click to collapse
same in here. I flash original rom from sam mobile site and my samsung sm-j100h is bricked now. i flash using odin and everthing was ok and it was pass. but nothing happend later on, screen remains black and I don't know what to do.
or atleast tell me can I get somehow all data stored on phone, if yes how to do it
guys still nothing???
same problem guys i bricked the phone 2 days ago with the original firmware from sam mobile u.u i put my samusung j1 in download mode and with odin i done the reflash odin it was green and said me passed but then when i tried to turn on the phone nothing happened my phone is died hard bricked is there a guys something to do to repair him?
i got the same problem..
the phone was completely DEAD after i followed all the instructions here => https://www.youtube.com/watch?v=1T9fxno2s68
Please somebody help us..
Here's my thread => http://forum.xda-developers.com/android/help/help-sm-j100h-dead-power-flash-t3511894
Thank you very much..
im using sm j110h and i too flashed orginal stock rom via odin but unfortunately i forget to put the batteries on and i fonud that after that i got pass message only now the screen remaines black and not getting to download mode and not switching on. does anyone help me on this problem hope will get a solution thanks in advance
Gal J1 of sadness.... but still hoping
2 days ago a friend asked me to fix his J1 stuck in boot image. I gladly said yes for I've done it 4x already different units same model with satisfying results. This one is the exact opposite because after flashing with Odin and getting the Passed result, the phone didn't reboot. Actually it never booted right after that moment. System didn't recognize the phone not even a dim light or blink or any reaction from it even when plugged in a wall charger. tried all possible solutions even the galaxy tab procedure of total batt drain and so on. The firmware I got is from xda, J100MLDXU0AOB3_OLC0AOB5_v4.4.4_Repair_Firmware.zip, and I'm sure it's fine because I've used it already with good results...
Guys, any of you with a solution on this or any suggestions would be much appreciated... Thanks very much in advance!!! :fingers-crossed:
Chrisjopett said:
2 days ago a friend asked me to fix his J1 stuck in boot image. I gladly said yes for I've done it 4x already different units same model with satisfying results. This one is the exact opposite because after flashing with Odin and getting the Passed result, the phone didn't reboot. Actually it never booted right after that moment. System didn't recognize the phone not even a dim light or blink or any reaction from it even when plugged in a wall charger. tried all possible solutions even the galaxy tab procedure of total batt drain and so on. The firmware I got is from xda, J100MLDXU0AOB3_OLC0AOB5_v4.4.4_Repair_Firmware.zip, and I'm sure it's fine because I've used it already with good results...
Guys, any of you with a solution on this or any suggestions would be much appreciated... Thanks very much in advance!!! :fingers-crossed:
Click to expand...
Click to collapse
PM me pls and tell me how you flashed it etc.
Help
I have same problem,hard brick.Can anyone help?
somebody got solution? i did update by kies and now the phone is dead at all. i can use odin mode and also can using recovery anymore. hmm i think my problem come from the battery :crying:
kkq29 said:
somebody got solution? i did update by kies and now the phone is dead at all. i can use odin mode and also can using recovery anymore. hmm i think my problem come from the battery :crying:
Click to expand...
Click to collapse
Can you get into Odin Mode? If yes, flash the stock firmware of your region (here is a fast server which provides very fast downloads: fw.updato.com) If no, then you should change your battery as you're saying "it came from my battery" and try the first step again.
If it doesn't help as expected, then your phone is hard bricked and can't be repaired at all. The only solution would be changing the motherboard, but I would not waste my money on a low-end device motherboard and I would directly buy a new phone. :/
Regards,
xEmre66
If I am correct...
Then SM-J110H have Spreadtrum SC7727S
Here is Pinout for Direct eMMC...
https://postimg.cc/image/ul680l5jv/
This Pinout seems also to work with:
Code:
SM-G318HZ
SM-Z130H
I have leaked SM-Z130H PDF... where Instruction is inside to repair with tweezer... USB cable + Spreadtrum Tool:
Code:
[B]ResearchDownload[/B]
In theory something similar should be possible with SM-J110H...
I have at the moment only 1 problem... to create PAC file...
No idea from where I can get:
Code:
FDL1
FDL2
Best Regards
Edit 1.
Sorry, seems I was drunken...
It is sooo hard to find Posts or Threads about SM-J110H...
But it seems SM-J100H also Spreadtrum device...
xEmre66 said:
PM me pls and tell me how you flashed it etc.
Click to expand...
Click to collapse
PM me too please
My teacher phone has a same problem, hehehe.
same problem here. my phone got stuck up with samsung logo then i just dowloaded a firmware on sammobile and i flash it via odin at first it passed then my phone did'nt turn on anymore.
J100H / DD Finding Deadboot solution
Hi ... guys me too having this sort of problem and i found bad about samsung using 32bit - Spreadtrum SC8830A EMMC chipset here
Fix solution Not Found still! if i done i will tell you!
on = SM-J100H/DD --- corp =samsung yateley, uk
ok friend iam searching for Solution for 3days bt i found none= with a clue
It is J100H on serial port= SPRD U2S Daig (ComXX) usb says= SPRD COM Emumerator
this means - all sprd flashing been done on this 2 port only - in Miracle Box it says -
Scanning USB Serial port...
SU2Serial Port: COM64
Connecting to Phone,Wait..
Done.
Infor: SPRD3
Initialize boot19...
>>BootLoad Error. ID: 1
so my option is if we build a sprdp.bin and flash in AP(PDA) it will boot to Download mode
and dont ask me where is that file i dont no - if any one can provide a real backup pit.pit file
via phone to me i can find something and let u know it. Only from a alive phone J100H/DD
plz friends i need help any dumps or pit. and if any one has a alive J100H/DD please tell me.!
so i can get some help from u --If you wish to help
Soo i accidentally disabled the dev options on my samsung galaxy s7 edge and then decided to restart my phoe because i didnt notice and now im stuck with an error that says "custom binary blocked by FAP lock" now i looked around the internet on ways to fix this but the thing is that i cant really connect my phone to my computer, yes i did the volume down+power+home button thing and i connected it to my pc but nothing happened, odin didnt recognize my phone and my computer reads it as "gadget serial" i tried installing the usb drivers and all but i keep getting errors, its like my phone doesnt realy wants to cooperate.
Anyways i was wondering if any of you could help me with this please, i beg of you if anyone has an answer im willing to try, also if you need more info just ask, ill be glad to provide, thanks!
Anyone?...
Well i managed to fixed it so heres the solution for all of you that may come across this,
Soo basically make sure youre pc is fully updated, it must have all window drivers installed (i used windows 10) all window updates, make sure all the pieces of your pc are updated and then connect your phone and for the love of god be patient
I take it this is you're first time encountering something like this... at any rate, welcome to the forums.
Greetings everyone. So let me preface this by saying, I do know a fair bit about android, odin and the like so I am familiar with troubleshooting by reverting to stock via odin. I was on my S7 the other day and noticed that it had an update. So, I hit update and let it do it's thing. While updating the screen went pink then restarted.
Phone Info: **S7 Edge T-Mobile | SM-G935TZKATMB**
Now the only screen I am greeted with is:
SBL Error!
SET CP DEBUG
rdx_init!
skip print_summary_to_lcd
SBL ERROR
UPLOAD MODE
Things I've tried:.
1. Recovery mode (Goes to the sbl error screen)
2. Download mode (Goes to the sbl error screen)
3. USB Jig to force download mode (Goes to the sbl error screen, tested the jig on a friends phone, so it indeed works)
4. Opening Odin while the phone is connected to my pc. Shows a com port, but not able to actually flash anything.
The phone is showing in the device manager as a modem and I have tried an EDL cable which puts it into qualcom mode 8008. I am not sure if there is anything that can be done or not. I have a feeling that it might have to be repaired through JTAG. I have seen instances where a file from a working s7edge can be put onto an SD card to revive it but, I've had no luck in finding such a file online and do not know anyone locally with one to get them to do the backup process, Any help would be appreciated.
FIXED! Here is how to fix the issue
Steps to use emergency files (YOU WILL NEED OR MAKE AN EDL CABLE FOR THIS METHOD):
1. Open Files 35 - 50 - 55.rar navigate through to the folder 35 and then extract DEBUG_EMERGENCY_DOWNLOAD_FA60_G935AUCU5ARA2_CL1107 1963_QB16394537_REV02_user_mid_noship_MULTI_CERT.t gz somewhere you can find it, then navigate through the folders "nhols>common>tools>emergency download then extract all files to a new folder.
2. Put your phone into emergency download mode via your EDL cable Run the "recovery.bat" and then once asked input your qualcomm loader port number (found in device manager)
3. If all steps are done correctly then you should be able to use the vol down+home+power into download mode
Link to emergency files Emergency Files
Link to my reddit post as I was troubleshooting the issue Reddit Post
lmao im having same issue as we speak on a g935a myself! if u find a way please help me
I've fixed this issue if anyone still needs help with it!
oSlLENCEo said:
I've fixed this issue if anyone still needs help with it!
Click to expand...
Click to collapse
How did you fix it?
And what carrier SIM is in your phone, T-Mo right?
charter3554 said:
How did you fix it?
And what carrier SIM is in your phone, T-Mo right?
Click to expand...
Click to collapse
Yes, my phone is the s7 Edge T-Mo. Not able to post a link right now, so I'll message you with the information.
oSlLENCEo said:
Yes, my phone is the s7 Edge T-Mo. Not able to post a link right now, so I'll message you with the information.
Click to expand...
Click to collapse
please message me also! asap thanks
oSlLENCEo said:
Yes, my phone is the s7 Edge T-Mo. Not able to post a link right now, so I'll message you with the information.
Click to expand...
Click to collapse
Are you able to post a link now? I am having the same issues after trying to flash a combination file. Actually Chimera tried to flash it and now my phone won't get past this sbl error. I can enter EDL mode but that's about it. And i haven't been able to find the information online anywhere yet. It's becoming very frustrating. If you can't post a link can you send me a message with how to fix this please!?!?
Same Problem
Please help. I have the same problem... My phone is Galaxy S7 Edge. Had software update failed error and followed steps, but that also failed and now stuck with the sbl upload screen...
hello i need help to get out of sbl error. S7 g930p thank you
oSlLENCEo said:
I've fixed this issue if anyone still needs help with it!
Click to expand...
Click to collapse
hello i need help to get out of sbl error. thank you
Help spl error
Could u plz help me with this spl error upload mode on Samsung galaxy s7 edge sm-g935t. Thanks
Frustrated
oSlLENCEo said:
I've fixed this issue if anyone still needs help with it!
Click to expand...
Click to collapse
Yes, please help me with this before my s7 goes through a window lol
Hey guys, sorry I've not been active on this lately. I've had a ton of work. I'll be free tomorrow and will help anyone who has asked for it in this thread.
hec2k said:
lmao im having same issue as we speak on a g935a myself! if u find a way please help me
Click to expand...
Click to collapse
flash : Samsung_G935x_QC_Rooted_BOOT ,use modified odin (prince comsy),works for me
oSlLENCEo said:
Hey guys, sorry I've not been active on this lately. I've had a ton of work. I'll be free tomorrow and will help anyone who has asked for it in this thread.
Click to expand...
Click to collapse
Please help us, I hace the sane problem :bueno:
Hello friends I have an S7 g930p with SBL ERROR will not let me do anything, I HAVE THE EDL CABLE but there is no recognize port, I want to know if there is a combination to be able to recognize the port.
oscard0426 said:
Hello friends I have an S7 g930p with SBL ERROR will not let me do anything, I HAVE THE EDL CABLE but there is no recognize port, I want to know if there is a combination to be able to recognize the port.
Click to expand...
Click to collapse
Are you getting into EDL mode properly? Your screen should be black if you are in EDL mode, and you'll get a Qualcomm loader device in your ports section of device manager.
oSlLENCEo said:
Are you getting into EDL mode properly? Your screen should be black if you are in EDL mode, and you'll get a Qualcomm loader device in your ports section of device manager.
Click to expand...
Click to collapse
Hi,
I already have EDL cable. can you tell me how to put in to EDL mode. thank.
Thank you so much!
So i have it recognize the qualcom port and i do the recover file, but any button combo will not work. If i have it in edl do i need to press the buttons? Also i need the firmware for a 935t. Can anybody help me out as i know im just missing steps. Thank you
Hello bro
I have Samsung S7 US Cellular variant model is SM-G930R4 and I have the exactly same error on my screen, it came during an update which went fail at the end and initially it was showing a blue screen written instruction to use Verizon update app to download the right firmware but then somehow went into this SBL ERROR screen.
Could you please guide where to find the files as you use for S7 Edge above?
Really appreciate for your help!
Regards