Nokia 6 stuck in boot loop - Nokia 6 Questions & Answers

My Nokia 6 (TA-1021) got stuck in boot loop.
Every time i power on the device it gets to the screen that says "Powered by android" and keeps rebooting.
It also shows "shutdown device" on top. How can i get into recovery mode ??
i tried using power + volume up key but it keeps entering the boot loop..
i even tried using adb but as the device is not starting it shows "error: no devices/emulators found".
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

https://forum.xda-developers.com/nokia-6/development/nokia-6-official-firmware-mena-region-t3664441
---------- Post added at 10:08 PM ---------- Previous post was at 10:07 PM ----------
walkn911 said:
My Nokia 6 (TA-1021) got stuck in boot loop.
Every time i power on the device it gets to the screen that says "Powered by android" and keeps rebooting.
It also shows "shutdown device" on top. How can i get into recovery mode ??
i tried using power + volume up key but it keeps entering the boot loop..
i even tried using adb but as the device is not starting it shows "error: no devices/emulators found".
Click to expand...
Click to collapse
https://forum.xda-developers.com/nokia-6/development/nokia-6-official-firmware-mena-region-t3664441

Mine is also so, if you managed to solve please help.
Mine is also so, if you managed to solve please help.

igorbm2010 said:
Mine is also so, if you managed to solve please help.
Click to expand...
Click to collapse
If you know how to flash MENA FIRMWARE then when your pc ask you to connect your device to OST LA tool then plug it, next time when your device will reboot then it will directly go to download mode and hence u could be able to flash your device

sltushar said:
If you know how to flash MENA FIRMWARE then when your pc ask you to connect your device to OST LA tool then plug it, next time when your device will reboot then it will directly go to download mode and hence u could be able to flash your device
Click to expand...
Click to collapse
My phone is also stuck in boot loop and i tried flashing using OST LA but it always shows error.Error detaıls:-
Error code : 0xc6da
Error : Download fails,
Error = SE_ERR_ADB_CMD_GET_FAIL_RESULT (0xC6DA)

Can you enter recovery? What's the recovery version? Have you tried to upgrade to Oreo when bootloop happened?

qwertysmerty said:
Can you enter recovery? What's the recovery version? Have you tried to upgrade to Oreo when bootloop happened?
Click to expand...
Click to collapse
no can't enter into recovery. The phone is already updated to Oreo. And now when i tried to install stock version its stuck in boot loop and shows these error messages when i tried to flash using OST LA.

That's sad since you already have oreo sbl/aboot and cannot enter recovery to downgrade it. I think you have 2 options - either go to service center, or open up your phone to short test point and enter edl mode, but you will lose warranty if you have one.

qwertysmerty said:
That's sad since you already have oreo sbl/aboot and cannot enter recovery to downgrade it. I think you have 2 options - either go to service center, or open up your phone to short test point and enter edl mode, but you will lose warranty if you have one.
Click to expand...
Click to collapse
How to open to short test point and enter edl mode? Thanks in advance.

barun777 said:
no can't enter into recovery. The phone is already updated to Oreo. And now when i tried to install stock version its stuck in boot loop and shows these error messages when i tried to flash using OST LA.
Click to expand...
Click to collapse
Apparently the process to access Recovery Mode changed from Oreo beta to Oreo stable, at least for the TA-1025:
Phone model: Nokia 6 TA-1025
Android version: 8.0.0 (Oreo, stable)
Android security patch level: February 1, 2018
Build number: 00WW_5_22A
Power off your phone.
Connect your phone to a charger.
"POWERED BY android" logo will appear, followed by the battery charging screen.​
[*]Hold VOLUME UP + POWER BUTTON for 10 seconds, release.​
During the 10 seconds, your phone will power cycle, followed by the "POWERED BY android" logo, followed by an image of Bugdroid (Android robot) with the text "no command".​
If you see the the NOKIA logo instead of Bugdroid, you released VOLUME UP + POWER BUTTON too early or too late. Start over.​
From the "no command" screen, hold POWER BUTTON, tap VOLUME UP, release POWER BUTTON. This should take you into Recovery Mode.
Credit to CJShawnz

I faced same problem.i was lucky as i could change it guving 30$ to store to change it.

MisterNeato said:
Apparently the process to access Recovery Mode changed from Oreo beta to Oreo stable, at least for the TA-1025:
Phone model: Nokia 6 TA-1025
Android version: 8.0.0 (Oreo, stable)
Android security patch level: February 1, 2018
Build number: 00WW_5_22A
Power off your phone.
Connect your phone to a charger.
"POWERED BY android" logo will appear, followed by the battery charging screen.​
[*]Hold VOLUME UP + POWER BUTTON for 10 seconds, release.​
During the 10 seconds, your phone will power cycle, followed by the "POWERED BY android" logo, followed by an image of Bugdroid (Android robot) with the text "no command".​
If you see the the NOKIA logo instead of Bugdroid, you released VOLUME UP + POWER BUTTON too early or too late. Start over.​
From the "no command" screen, hold POWER BUTTON, tap VOLUME UP, release POWER BUTTON. This should take you into Recovery Mode.
Credit to CJShawnz
Click to expand...
Click to collapse
Its not working. phone is not gong into the ''no command''. Its stuck in boot-loop.

barun777 said:
Its not working. phone is not gong into the ''no command''. Its stuck in boot-loop.
Click to expand...
Click to collapse
Just put it somewhere and let the bettery be low and then let it properly shutdown
Then put it to charge
Then try to enter to recovery mode
Remember you will have one chance only
Don't power on your device, just follow the steps to enter to the recovery menu, because power on will put u again to boot loop.

sltushar said:
Just put it somewhere and let the bettery be low and then let it properly shutdown
Then put it to charge
Then try to enter to recovery mode
Remember you will have one chance only
Don't power on your device, just follow the steps to enter to the recovery menu, because power on will put u again to boot loop.
Click to expand...
Click to collapse
I have already tried this method. Its not working. Actually I can power off the phone by pressing vol + and vol - buttons together. Boot-loop stops and the phone shutdowns but the navigation LEDs remains in the ON state.

barun777 said:
How to open to short test point and enter edl mode? Thanks in advance.
Click to expand...
Click to collapse
Are you sure you want to do this? You can break your phone. It might be easier to send it to the nearest Nokia service center.
You can find a video on youtube about how to tear down Nokia 6 (JerryRigEverything channel). You need to remove screen and battery plate. Then connect back battery and screen cables. Power up your phone and short test point while phone boots. It should enter EDL mode so you can use whatever flasher. Personally I would just flash sbl/aboot/recovery partitions with images from Nougat using emmcdl. Something like this:
emmcdl -p COM3 -f prog_emmc_firehose_8937_lite.mbn -b recovery recovery.img
where COM3 is the assigned port name. Programmator prog_emmc_firehose_8937_lite.mbn you can take from any Nougat OTA zip, as well as recovery, appsboot, and sbl images.

Did you ever get this sorted? Mine is doing same, OST won't recognise it, keeps saying process failed error = SE_ERR_SUT_PHONE_KEY_ACCESS_FAIL (0xC60E)

Same problem my phone but i go store return my phone he says no solution i am very sad please help us plssss

Related

Root LG T-Mobile LG GPAD X 8.0 V52110c

First check oem unlock in setting>develop> go to fastboot > fastboot oem unlock.
- Download Rom add rooted: https://drive.google.com/file/d/0BwLkiuDnHmY0bTBsOG12VnBOa3c/view?usp=sharing
- LGUP 1.14.3:http://oceanhost.eu/eps4h4pmwphu/LGUP.zip.htm
- Use LGUP load file dz twrp then START.
- Done phone have rooted
Paypal: [email protected]
Thank you donate.[/B]
I will try this in the morning. I'm new to LG, how do you flash stock?
I put in $25 and will send it when I verify it works.
Thanks for the work!
Currently I am at work.
I will test it once I got home.
----- edit -----
Got soft brick on the device.
TWRP seems to work, but it is stuck on LG boot screen (The device can't be checked for corruption)
I have to open the back cover and reconnect the battery.
Since I have stock kdz file, it goes back to normal after flashing with stock kdz
mingkee said:
Currently I am at work.
I will test it once I got home.
----- edit -----
Got soft brick on the device.
TWRP seems to work, but it is stuck on LG boot screen (The device can't be checked for corruption)
I have to open the back cover and reconnect the battery.
Since I have stock kdz file, it goes back to normal after flashing with stock kdz
Click to expand...
Click to collapse
You can open a thread and put some pictures about how to open the back cover and disconnect the battery.
@tungkick, our device name is T-Mobile LG GPAD X 8.0, not 8.3. Hope those gpad 8.3 users weren't confused.
googlephone said:
You can open a thread and put some pictures about how to open the back cover and disconnect the battery.
@tungkick, our device name is T-Mobile LG GPAD X 8.0, not 8.3. Hope those gpad 8.3 users weren't confused.
Click to expand...
Click to collapse
Pry open from USB OTG port, and use a mini screwdriver to remove the battery connector.
Once you turned off this way, press and hold volume up and plug USB to enter download mode.
Run LGUP and install stock kdz file (upgrade).
mingkee said:
Currently I am at work.
I will test it once I got home.
----- edit -----
Got soft brick on the device.
TWRP seems to work, but it is stuck on LG boot screen (The device can't be checked for corruption)
I have to open the back cover and reconnect the battery.
Since I have stock kdz file, it goes back to normal after flashing with stock kdz
Click to expand...
Click to collapse
Do not know if you're having the same boot problem as me. But I did not have to remove battery to get it to reboot. I just hold all 4 buttons down for a good amount of time and device will reboot. Leave USB cord in and release all buttons then vol up to get into download mode.
Re-reading your post the same exact thing happened to me when testing with tungkick on Skype. dz seems to flash just fine but then it will not boot tablet, so no way to adb reboot recovery.
emilyrugburn said:
Do not know if you're having the same boot problem as me. But I did not have to remove battery to get it to reboot. I just hold all 4 buttons down for a good amount of time and device will reboot. Leave USB cord in and release all buttons then vol up to get into download mode.
Re-reading your post the same exact thing happened to me when testing with tungkick on Skype. dz seems to flash just fine but then it will not boot tablet, so no way to adb reboot recovery.
Click to expand...
Click to collapse
It's uneccesary to open the device to reboot it. Once you've flashed TungKicks stuff, you can Hold Volume down and Power to restart the device, then enter recovery with the key combo, then you can shut down or do whatever with the device with TWRP.
-----------------------------------------------------------------------------
So, Using the info on TungKicks' post I've flashed the device, It has TWRP, but does not boot to android. it just hangs on the dm-verity warning.
I had to use the key combo to get to recovery.
Volume Down + Power. Release power when LG logo shows up, continue to hold Volume Down. Re press power after one second.
Recovery has issues too.
-Can't wipe the device.
-nothing gets mounted.
-TWRP claims that there's no OS installed
-Upon further testing, the recovery reports itself as V510 via MTP. No beuno!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
eriklion said:
It's uneccesary to open the device to reboot it. Once you've flashed TungKicks stuff, you can Hold Volume down and Power to restart the device, then enter recovery with the key combo, then you can shut down or do whatever with the device with TWRP.
-----------------------------------------------------------------------------
So, Using the info on TungKicks' post I've flashed the device, It has TWRP, but does not boot to android. it just hangs on the dm-verity warning.
I had to use the key combo to get to recovery.
Volume Down + Power. Release power when LG logo shows up, continue to hold Volume Down. Re press power after one second.
Recovery has issues too.
-Can't wipe the device.
-nothing gets mounted.
-TWRP claims that there's no OS installed
Click to expand...
Click to collapse
I didn't know how to get to recovery with key combo, everything else I knew. As for TWRP... it's a start, but I wonder what needs to be changed for it to work with this device.
emilyrugburn said:
I didn't know how to get to recovery with key combo, everything else I knew. As for TWRP... it's a start, but I wonder what needs to be changed for it to work with this device.
Click to expand...
Click to collapse
I mention the key combo for restarting the device and entering recovery.
Re: TWRP, it's probably the mounts. Not sure.
eriklion said:
I mention the key combo for restarting the device and entering recovery.
Re: TWRP, it's probably the mounts. Not sure.
Click to expand...
Click to collapse
Nice... thanks for the info. Hopefully @tungkick can fix this mount issue.
eriklion said:
-Upon further testing, the recovery reports itself as V510 via MTP. No beuno!
Click to expand...
Click to collapse
What happened here then? tungkick got confused (it is confusing) because of the model names and compile twrp wrongly from it?
I think waitting upload file root done but he network verry low. I need personal contact me i root with twrp this then backup full tot add root
Twrp this verry hard use
First check oem unlock in setting>develop> go to fastboot > fastboot oem unlock.
- Download Rom add rooted: https://drive.google.com/file/d/0BwLkiuDnHmY0bTBsOG12VnBOa3c/view?usp=sharing
- LGUP 1.14.3:http://oceanhost.eu/eps4h4pmwphu/LGUP.zip.htm
- Use LGUP load file dz twrp then START.
- Done phone have rooted
tungkick said:
First check oem unlock in setting>develop> go to fastboot > fastboot oem unlock.
- Download Rom add rooted: https://drive.google.com/file/d/0BwL...ew?usp=sharing
- LGUP 1.14.3:http://oceanhost.eu/eps4h4pmwphu/LGUP.zip.htm
- Use LGUP load file dz twrp then START.
- Done phone have rooted
Click to expand...
Click to collapse
Tot link got cut off. invalid link
emilyrugburn said:
Tot link got cut off. invalid link
Click to expand...
Click to collapse
https://drive.google.com/file/d/0BwLkiuDnHmY0bTBsOG12VnBOa3c/view?usp=sharing
HEHE^^
tungkick said:
https://drive.google.com/file/d/0BwLkiuDnHmY0bTBsOG12VnBOa3c/view?usp=sharing
HEHE^^
Click to expand...
Click to collapse
I will test it after work.
Thanks for your hard work.
tungkick said:
https://drive.google.com/file/d/0BwLkiuDnHmY0bTBsOG12VnBOa3c/view?usp=sharing
HEHE^^
Click to expand...
Click to collapse
Flash success. Rooted :good: :highfive:
For anyone who flashes this dz. Towards the end it will hang at 100%, just let it continue and it will eventually reboot.
emilyrugburn said:
Flash success. Rooted :good: :highfive:
For anyone who flashes this dz. Towards the end it will hang at 100%, just let it continue and it will eventually reboot.
Click to expand...
Click to collapse
Root also works on mine.
No Adapt Client.
Install Adaway now
I'm getting a Boot verification fail message - Cause MISMATCH_SIG_LEN. Everything went 100% in LGUP, not sure what happened. Its just boot looping on startup screen (LG - powered by android screen)

Huawei p9 lite stuck at " your device is booting now "

Hello,
Please help me, my p9 lite is stuck on " your device is booting now ". I can't do anything. The recovery and the bootloader doesn't work at all. My bootloader Is unlocked. Please help me please :crying:. I've got this phone for Christmas and... He's already not working :crying:
NewShield_ said:
Hello,
Please help me, my p9 lite is stuck on " your device is booting now ". I can't do anything. The recovery and the bootloader doesn't work at all. My bootloader Is unlocked. Please help me please :crying:. I've got this phone for Christmas and... He's already not working :crying:
Click to expand...
Click to collapse
Hello,
Please tell us what exactly were you trying to do?
Regards
Vatsal,
Forum Moderator.
Vatsal said:
Hello,
Please tell us what exactly were you trying to do?
Regards
Vatsal,
Forum Moderator.
Click to expand...
Click to collapse
Hello,
Thank you for helping me .
I'm sorry if my English is very bad, but I'm French.
My phone is stuck at " your device is booting now ". Then, he made a bootloop... And he don't start. I've made the b328 update for nougat with EMUI 5.0 ( Beta ). And, I wanted to return to marshmallow. Then, I've flashed the rom via the bootloader ( system.img, cust.img, boot.img, ect... ). And, when I restarted my p9 lite, he was stuck on " your device is booting now ". And that's how I'm stuck, because I can't do anything. I can't go to the recovery. And I can't go to the bootloader. I'm very stuck.
And, again, I'm sorry if my English is very bad.
Thank you !
NewShield_ said:
Hello,
Thank you for helping me .
I'm sorry if my English is very bad, but I'm French.
My phone is stuck at " your device is booting now ". Then, he made a bootloop... And he don't start. I've made the b328 update for nougat with EMUI 5.0 ( Beta ). And, I wanted to return to marshmallow. Then, I've flashed the rom via the bootloader ( system.img, cust.img, boot.img, ect... ). And, when I restarted my p9 lite, he was stuck on " your device is booting now ". And that's how I'm stuck, because I can't do anything. I can't go to the recovery. And I can't go to the bootloader. I'm very stuck.
And, again, I'm sorry if my English is very bad.
Thank you !
Click to expand...
Click to collapse
Hello,
I will move your thread to correct section, the experts there might be able to assist you.
Regards
Vatsal,
Forum Moderator.
the fix
NewShield_ said:
Hello,
Thank you for helping me .
I'm sorry if my English is very bad, but I'm French.
My phone is stuck at " your device is booting now ". Then, he made a bootloop... And he don't start. I've made the b328 update for nougat with EMUI 5.0 ( Beta ). And, I wanted to return to marshmallow. Then, I've flashed the rom via the bootloader ( system.img, cust.img, boot.img, ect... ). And, when I restarted my p9 lite, he was stuck on " your device is booting now ". And that's how I'm stuck, because I can't do anything. I can't go to the recovery. And I can't go to the bootloader. I'm very stuck.
And, again, I'm sorry if my English is very bad.
Thank you !
Click to expand...
Click to collapse
the method to fix this is to create a folder on the root of the sd card called DLOAD then put the stock huawei uppdate.app in the folder then shut down and hold volume up, down and the power button at the same time and it will flash the stock firmware, then shut down and boot recovery then wipe user data, next cache then davlik cache then, reebot and give it time to boot.
hellpp
i heave same problem but i cant shut down same and same. i hold all vol up vol down with and without power but same. YOU DIVACE HAS BEEN UNLOCKED AND CANT BE TRUSTED
TO LEARN MORE VISIT.......SITE
YOUR DEVICE IS BOOTING NOW
mendja said:
i heave same problem but i cant shut down same and same. i hold all vol up vol down with and without power but same. YOU DIVACE HAS BEEN UNLOCKED AND CANT BE TRUSTED
TO LEARN MORE VISIT.......SITE
YOUR DEVICE IS BOOTING NOW
Click to expand...
Click to collapse
Did you try wating till the battery is fully discharged?
xDavi01 said:
Did you try wating till the battery is fully discharged?
Click to expand...
Click to collapse
yes am weathing but when a plug eny of cable come on seame
YOU DIVACE HAS BEEN UNLOCKED AND CANT BE TRUSTED
TO LEARN MORE VISIT.......SITE
YOUR DEVICE IS BOOTING NOW
this is end of my phone
Hmmm.. it looks like it's trying to boot into recovery, but, probably it's a corrupted recovery: when you flash a corrupted recovery and it tries to boot into it, it'll be stuck in "Your phone is booting up etc...". I experienced that about a week ago but to get my phone working again, i just copied b161 in my external sdcard in the folder "dload". Then i inserted the ext sd in my phone and i held Power Button for about 10 seconds and my phone shut down. Then i held Power Button + Vol Up + Vol Down and popped up the update screen. That's how i managed my phone to get it work again, hope this helps you
xDavi01 said:
Hmmm.. it looks like it's trying to boot into recovery, but, probably it's a corrupted recovery: when you flash a corrupted recovery and it tries to boot into it, it'll be stuck in "Your phone is booting up etc...". I experienced that about a week ago but to get my phone working again, i just copied b161 in my external sdcard in the folder "dload". Then i inserted the ext sd in my phone and i held Power Button for about 10 seconds and my phone shut down. Then i held Power Button + Vol Up + Vol Down and popped up the update screen. That's how i managed my phone to get it work again, hope this helps you
Click to expand...
Click to collapse
dont help me that.....same and same
your device......
to learn.....
your device is booting now
I can not get no fastboot or anything else. no matter what ... pushing volume up or down with or without. all I tried no works
mendja said:
dont help me that.....same and same
your device......
to learn.....
your device is booting now
I can not get no fastboot or anything else. no matter what ... pushing volume up or down with or without. all I tried no works
Click to expand...
Click to collapse
That's really unusual... When you're stuck in that screen, there aren't a lot of ways to power off. The ways i know are hold Power Button or wait till the battery is fully discharged. By the way, you said that you tried discharging, but what happened when you connected the charging cable? Did the phone showed the boot logo (huawei, not the animated one) and then the triple choice menu?
xDavi01 said:
That's really unusual... When you're stuck in that screen, there aren't a lot of ways to power off. The ways i know are hold Power Button or wait till the battery is fully discharged. By the way, you said that you tried discharging, but what happened when you connected the charging cable? Did the phone showed the boot logo (huawei, not the animated one) and then the triple choice menu?
Click to expand...
Click to collapse
Now is discharged when i connect pc or charger for a second come huawei logo and come not triple choice but only one.
mendja said:
Now is discharged when i connect pc or charger for a second come huawei logo and come not triple choice but only one.
Click to expand...
Click to collapse
Can you send me a photo of your current phone screen?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------- Post added at 05:18 PM ---------- Previous post was at 05:15 PM ----------
mendja said:
Click to expand...
Click to collapse
---------- Post added at 05:19 PM ---------- Previous post was at 05:18 PM ----------
https://www.dropbox.com/s/432wwj90djiins2/DSC_0002.JPG?dl=0
https://drive.google.com/file/d/0B9uAuRN28d6PQnlLdUN2RVpZWFk/view?usp=sharing
Try to discharge it again, then right when you connect it to the charger, before the huawei's logo, instantly hold Power Button + Vol Up.
Nothing about pressing buttons does not work. whether it is possible to do something without key volume up Volume Down. because it not only does not help returns the same picture I tried 100 times
mendja said:
Nothing about pressing buttons does not work. whether it is possible to do something without key volume up Volume Down. because it not only does not help returns the same picture I tried 100 times
Click to expand...
Click to collapse
I think that maybe there's an internal problem with the buttons, because if there is an issue with the motherboard , it wouldn't even show you the screen where you're stuck (i'm not sure at all about it because i'm not an expert in theese things). How old is your phone? Maybe there's just some oxide under the buttons.
same thing happens to me phone is a week old - after i connect the charger after the battery drain i can go to software, but no keyboard present and cannot factory data rest. Discharging now again and will try to power up with the button combination.
mendja said:
Nothing about pressing buttons does not work. whether it is possible to do something without key volume up Volume Down. because it not only does not help returns the same picture I tried 100 times
Click to expand...
Click to collapse
Did you ever figure out how to fix this? I have the same problem now.
I tried flashing the latest twrp recovery from here:
https://forum.xda-developers.com/huawei-p9lite/development/twrp-t3588356
After it finished installing (fastboot didn't give me any Errors) my phone rebooted to the same screen you posted.
My phone keeps rebooting to the same screen no matter what button combinations I press. I also can't turn it off. Keeps rebooting. I'm now waiting for it to fully discharge (it was at 100%) and I will try to get it to boot into the three options menu.
I was trying to update my P9lite (currently VNS-L23C605B120) to Nougat VNS-L23C605B364 (latest found with HuaweiFirmwareFinder).
finnpuschmann said:
Did you ever figure out how to fix this? I have the same problem now.
I tried flashing the latest twrp recovery from here:
https://forum.xda-developers.com/huawei-p9lite/development/twrp-t3588356
After it finished installing (fastboot didn't give me any Errors) my phone rebooted to the same screen you posted.
My phone keeps rebooting to the same screen no matter what button combinations I press. I also can't turn it off. Keeps rebooting. I'm now waiting for it to fully discharge (it was at 100%) and I will try to get it to boot into the three options menu.
I was trying to update my P9lite (currently VNS-L23C605B120) to Nougat VNS-L23C605B364 (latest found with HuaweiFirmwareFinder).
Click to expand...
Click to collapse
You have to take the revolution recovery, because the TWRP Is made for Marshmallow, and if you flash a recovery made for Marshmallow in Nougat, the phone will not load correctly the files and will get stuck on this screen.
So you have to flash the Revolution recovery for the P9 Lite and flash it via Fastboot. You can find it here : https://forum.xda-developers.com/hu...ecovery-twrp-3-0-2-android-nougat-03-t3511937. Once flashed via bootloader, boot into this revolution recovery ( It's like TWRP, just different design ). And then, flash the ROM that you want.

checking informations issue

Hello,
I have an issue with my Huawei p9 lite. I updated it to nougat but I hadn't bt, gps and other functions. So I went back to marshmallow downloading the official version on the site Huawei but my problem is : when I configure my phone, it come always back to the wifi+ screen (cancel or activate). The next screen is "checking informations" but this screen stay only 1 seconds and then it go back to the screen "wifi+".
Is someone able to help me plz ?
zanksa said:
Hello,
I have an issue with my Huawei p9 lite. I updated it to nougat but I hadn't bt, gps and other functions. So I went back to marshmallow downloading the official version on the site Huawei but my problem is : when I configure my phone, it come always back to the wifi+ screen (cancel or activate). The next screen is "checking informations" but this screen stay only 1 seconds and then it go back to the screen "wifi+".
Is someone able to help me plz ?
Click to expand...
Click to collapse
Man, you mess up your phone...
Once you are on Nougat you can not flash inferior firmware without preparation...
First need to flash Oeminfo... Without that your phone is not recognized ok by the firmware...
gtdaniel said:
Man, you mess up your phone...
Once you are on Nougat you can not flash inferior firmware without preparation...
First need to flash Oeminfo... Without that your phone is not recognized ok by the firmware...
Click to expand...
Click to collapse
There is nothing to do ?
zanksa said:
There is nothing to do ?
Click to expand...
Click to collapse
there is, just search for "ultimate guide to nougat", it has all info you need.
basically you flash oeminfo and then the stock rom
mjz2cool said:
there is, just search for "ultimate guide to nougat", it has all info you need.
basically you flash oeminfo and then the stock rom
Click to expand...
Click to collapse
Ok thanks a lot. I thought that it was over
I will try this !
mjz2cool said:
there is, just search for "ultimate guide to nougat", it has all info you need.
basically you flash oeminfo and then the stock rom
Click to expand...
Click to collapse
I don't understand it. It says I must install TWRP but I haven't access to my phone because I'm blocked in the configuration and so I can't unlock the bootloader too.
Can someone make me an easy tutorial to follow ? I'm a novice in this field :/
zanksa said:
I don't understand it. It says I must install TWRP but I haven't access to my phone because I'm blocked in the configuration and so I can't unlock the bootloader too.
Can someone make me an easy tutorial to follow ? I'm a novice in this field :/
Click to expand...
Click to collapse
you should be able to unlock the bootloader with fastboot oem unlock (code)
I failed with a file. I flashed a rollback package of nougat to marshmallow instead of the stock rom. And now my Huawei stay blocked on the logo when I turn it on . Any idea of what I can do ? I have the guarantee of my p9 lite too. Maybe should I send it to the repair service ?
zanksa said:
I failed with a file. I flashed a rollback package of nougat to marshmallow in place of the stock rom. And now my Huawei stay blocked on the logo when I turn it on . Any idea of what I can do ? I have the guarantee of my p9 lite too. Maybe should I send it to the repair service ?
Click to expand...
Click to collapse
Man , forget about configuration...
You have to start from scratch...
Power off your phone and try followings:
- power on with <vol–> + <power> and check if start in fastboot mode
- power on with <vol+> + <power> and check if start in recovery mode (twrp or recovery emui)
- power on with <vol–> + <vol+> + <power> and check if start in dload mode
- after that start with USB connection to PC with <vol–> + <power> and see if appear as serial number at fastboot command: devices.
If all works you can start your phone resurrection...
gtdaniel said:
Man , forget about configuration...
You have to start from scratch...
Power off your phone and try followings:
- power on with <vol–> + <power> and check if start in fastboot mode
- power on with <vol+> + <power> and check if start in recovery mode (twrp or recovery emui)
- power on with <vol–> + <vol+> + <power> and check if start in dload mode
- after that start with USB connection to PC with <vol–> + <power> and see if appear as serial number at fastboot command: devices.
If all works you can start your phone resurrection...
Click to expand...
Click to collapse
I can't enter any mode. My phone is alwakys restarting and blocked on the Huawei logo. I can't turn it off
gtdaniel said:
Man , forget about configuration...
You have to start from scratch...
Power off your phone and try followings:
- power on with <vol–> + <power> and check if start in fastboot mode
- power on with <vol+> + <power> and check if start in recovery mode (twrp or recovery emui)
- power on with <vol–> + <vol+> + <power> and check if start in dload mode
- after that start with USB connection to PC with <vol–> + <power> and see if appear as serial number at fastboot command: devices.
If all works you can start your phone resurrection...
Click to expand...
Click to collapse
I have the same situation. No options with button combinations work. I see only such a screen. forum.xda-developers.com/attachment.php?attachmentid=4086705&d=1490344535
Loading is not possible. When I discharged the phone completely and decided to turn on the fast-boot mode, I booted into the android system. Rebooted and again saw the same screen.
Long press more than 10 second on Power not restarting the phone?
gtdaniel said:
Long press more than 10 second on Power not restarting the phone?
Click to expand...
Click to collapse
Yes, it reboots. Double vibrates and again the same screen
loginroman said:
Yes, it reboots. Double vibrates and again the same screen
Click to expand...
Click to collapse
so fast? between (before/after) double vibrate and logo can not make key combination (Vol- + Power)?
I think that I just will not have time between the vibrations. I once booted into the system, somehow miraculously, and tried to work through the ABD, sending a signal to reboot into the fastboot mode, but this is the same result.
gtdaniel said:
so fast? between (before/after) double vibrate and logo can not make key combination (Vol- + Power)?
Click to expand...
Click to collapse
Same for me. Double vibrate and blocked on the Huawei logo. The combinaisons don't work. It was working before I flashed the nougat to marshmallow package but not anymore
At the moment, I booted into android, but I'm just afraid to restart the phone.
---------- Post added at 01:08 PM ---------- Previous post was at 01:06 PM ----------
No no ... I do not see the logo, only that's it forum.xda-developers.com/attachment.php?attachmentid=4086705&d=1490344535
My opinion: the whole section of recovery and fastboot disappeared somewhere. Or they do not work correctly
loginroman said:
At the moment, I booted into android, but I'm just afraid to restart the phone.
---------- Post added at 01:08 PM ---------- Previous post was at 01:06 PM ----------
No no ... I do not see the logo, only that's it ..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Once you are in android, activate developer settings, check Oem unlock and check USB debugging and make authorization of USB debugging!
gtdaniel said:
Once you are in android, activate developer settings, check Oem unlock and check USB debugging and make authorization of USB debugging!
Click to expand...
Click to collapse
I have already done all this. But how to fix this situation. I have HUAWEI Multi-Tool. It reboots into fastboot mode..to unlock the bootloader. And I see this screen again.

No Fastboot?

So I'm getting stuck on the nexus boot screen and the OS will not load. Decided to to just flash the stock image and start from scratch. I'm able to get into stock recovery but unable to boot into Fastboot/bootloader from there. It just kicks me back to try and start the OS. When I get to the loading screen it shows dead Andy with a triangle and "no command" instead of being able to select recovery/bootloader/start system normal. I am unlocked and was running the stock image 8.0.0 before all this happened. No root. I've been reading that asus or nexus screwed something up. So am I bricked? I've tried to adb sideload from recovery but in getting a verification error.
Edit: Problem solved. I'm an idiot. There is a lag for when the NP Google logo comes on till the screen actually recognizes and shows up. Therefore, I was holding the button too long and it passing fastboot and going directly into recovery.
I'm stuck at the same point and thinking that i am just holding the reset button too long.
Got any idea on how long you held it for? I just seem to go directly into recovery and get no access to fastboot to do anything...
pegaxs said:
I'm stuck at the same point and thinking that i am just holding the reset button too long.
Got any idea on how long you held it for? I just seem to go directly into recovery and get no access to fastboot to do anything...
Click to expand...
Click to collapse
I honestly cannot remember, Maybe 3 to 5 seconds? As soon as I see that there is a signal yo the TV I let go. I know that if you do hold the button to long that it will go directly into recovery. Just start timing it at a point when you plug the power cord in and start working from there.
Hold the button / watch the LED
pegaxs said:
I'm stuck at the same point and thinking that i am just holding the reset button too long.
Got any idea on how long you held it for? I just seem to go directly into recovery and get no access to fastboot to do anything...
Click to expand...
Click to collapse
When you apply power the tiny led lights up solid. You should hold the button down until you see the light change to a blinking response, then let go. After that you will see the Google unlock and then you will get the fastboot screen.
I wish it was that easy. I have tried that. I can get the device into the recovery menu, but not into fastboot.
From the recovery menu, I can select “reboot into fastboot” but it just goes back into the bootloop “Google” screen.
The other issue is that the light never flashes. If I hold the button down, it just either reboots, or never flashes.
If I release the button when the Google logo comes up, it will go to the laying down Android with open chest and red exclamation mark in a triangle and the words “no command” under it.
If I press and hold the reset button for 5 seconds, then release it, it will boot into recovery, where I can select a few things.
When in recovery, the only thing I can get to connect to my PC is “sideload”. If I try and side load anything, such as magisk, I just get verification errors.
I cannot get the device to connect as a device. I cannot get it into fastboot. I have done nothing else too it. It was working last week when I turned it on, albeit YouTube wasn’t, and on the weekend I went to use it and it was dead and showing the “Google” logo screen.
So, unfortunately, due to there not being a “flashing” led, there seems to be no way of getting into fastboot.
I have even tried OP’s suggestion of timing the button hold and resetting at intervals of seconds, and this has also not worked, from 1 second all the way to 30 seconds...
let me add a "me too" Can't get into fastboot...even using adb reboot bootloader just reboots to recovery.
SOLVED
bigworm50 said:
let me add a "me too" Can't get into fastboot...even using adb reboot bootloader just reboots to recovery.
Click to expand...
Click to collapse
Can't you do an OTA image using recovery mode? Solution for me was to reflash using android 8 with the full google tool kit, doesn't work with a partial toolkit.
Same story here. Can't do OTA update either. I have a full kit too. I'm getting an error saying this update is for "fungu" devices. This is "". This probably means that it can't read even the device type. This is really horrible what Google has done! I tried loading different OTA versions as well. Same error.
Ideas?
CVZAYIN said:
Can't you do an OTA image using recovery mode? Solution for me was to reflash using android 8 with the full google tool kit, doesn't work with a partial toolkit.
Click to expand...
Click to collapse
SOLVED
nonamer88 said:
Same story here. Can't do OTA update either. I have a full kit too. I'm getting an error saying this update is for "fungu" devices. This is "". This probably means that it can't read even the device type. This is really horrible what Google has done! I tried loading different OTA versions as well. Same error.
Ideas?
Click to expand...
Click to collapse
NEXUS PLAYER IS THE FUGU OS
Went to the google Nexus images download page to get Android 8 OS and the platform tools (factory img). Installed the Win10 USB driver and then unzipped only the main first img zip file into the platform tools root folder. Enabled NP developer mode and enabled USB debugging according to google NP image download page instructions. Then restart NP into fastboot mode by holding the button down while plugging it in, holding button only until you see fast flashing LED will put you into fastboot mode. On PC, open command prompt and navigate to platform tools folder, then unlocked the device and ran the flash-all.bat file (see instructions). Bingo. If fastboot mode not available, you may want to see some of the youtube nexus bootloop videos on how to get into recovery mode and flash the OTA img instead. Flashing with Android 8 should free up about a gig of disk space. I relocked mine afterwards. Hope this helps.
CVZAYIN said:
Then restart NP into fastboot mode by holding the button down while plugging it in, holding button only until you see fast flashing LED will put you into fastboot mode.
Click to expand...
Click to collapse
NOT SOLVED
Did you not read the part where I and other users said there is no flashing LED and there is no fastboot?
I got my old NP out today to follow your solution and I am still at my original problem. I cannot even get into fastboot. I can get to stock recovery, but that’s it. I cannot even use that to reboot into fastboot, as it just goes back to the bootlooping google logo screen.
I can get very limited ADB access to sideload, but that is it. No root. No fastboot commands.
I solved the issue by putting it in a box, forgetting about it and buying an Apple TV box.
pegaxs said:
NOT SOLVED
Did you not read the part where I and other users said there is no flashing LED and there is no fastboot? I got my old NP out today to follow your solution and I am still at my original problem. I cannot even get into fastboot. I can get to stock recovery, but that’s it. I cannot even use that to reboot into fastboot, as it just goes back to the bootlooping google logo screen. I can get very limited ADB access to sideload, but that is it. No root. No fastboot commands. I solved the issue by putting it in a box, forgetting about it and buying an Apple TV box.
Click to expand...
Click to collapse
Wasn't my issue, but I'd mentioned earlier having seen where OTA images can be installed using recovery mode to resolve the bootlooping.
https://www.youtube.com/watch?v=Vscps1gNn0U
https://www.theandroidsoul.com/ota-bootloop-fix-nexus-6-6p-5x-9-9g-and-player/
Anyone else able to get past this? I get the following when i try to sideload the ota through the recovery.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://drive.google.com/file/d/1KglLdXeyOdPqm8ktKe8jAZzz0X6-uNsL/view?usp=drivesdk
CVZAYIN said:
Wasn't my issue, but I'd mentioned earlier having seen where OTA images can be installed using recovery mode to resolve the bootlooping.
https://www.youtube.com/watch?v=Vscps1gNn0U
https://www.theandroidsoul.com/ota-bootloop-fix-nexus-6-6p-5x-9-9g-and-player/
Click to expand...
Click to collapse

Axon 7 stuck at boot screen, cannot shutdown and restart.

Hi. Previously I flashed latest TWRP on my B03 Oreo in attempt to root my device but seems like TWRP not mount the internal memory. So I found this thread https://forum.xda-developers.com/android/general/how-to-fix-unable-to-mount-data-t3830897 and followed it but then I stucked at "Your device software can't be checked for corruption. Please lock the bootloader." screen.
I also cannot force shutdown the phone, pressing multiple combinations of power button and volume buttons also doesn't effect the phone at all. Now, i am waiting for the phone's battery to drain until zero. Maybe anyone can help me? If I can boot into EDL, I can reflash back the firmware of my phone and maybe that will solve the problem.
abdinsyakirin said:
Hi. Previously I flashed latest TWRP on my B03 Oreo in attempt to root my device but seems like TWRP not mount the internal memory. So I found this thread https://forum.xda-developers.com/android/general/how-to-fix-unable-to-mount-data-t3830897 and followed it but then I stucked at "Your device software can't be checked for corruption. Please lock the bootloader." screen.
I also cannot force shutdown the phone, pressing multiple combinations of power button and volume buttons also doesn't effect the phone at all. Now, i am waiting for the phone's battery to drain until zero. Maybe anyone can help me? If I can boot into EDL, I can reflash back the firmware of my phone and maybe that will solve the problem.
Click to expand...
Click to collapse
why did you followed that thread?and why use stock twrp.
and when you are the screen that says "Your device software can't be checked for corruption. Please lock the bootloader." just press volume down and select recovery...
Predatorhaze said:
why did you followed that thread?and why use stock twrp.
and when you are the screen that says "Your device software can't be checked for corruption. Please lock the bootloader." just press volume down and select recovery...
Click to expand...
Click to collapse
I follow that thread because my TWRP do not mount the internal sd card in the recovery mode.
I actually used Nfound version of TWRP but it never boot to recovery mode at all.
I cannot press anything at the screen right now. The screen seems to stuck. Is there anything I can do via wire to pc other than adb since adb cannot detect that screen as either edl or fastboot or adb mode.
abdinsyakirin said:
I follow that thread because my TWRP do not mount the internal sd card in the recovery mode.
I actually used Nfound version of TWRP but it never boot to recovery mode at all.
I cannot press anything at the screen right now. The screen seems to stuck. Is there anything I can do via wire to pc other than adb since adb cannot detect that screen as either edl or fastboot or adb mode.
Click to expand...
Click to collapse
you dont have to press the screen.Press volume button and then select recovery with power button
Predatorhaze said:
you dont have to press the screen.Press volume button and then select recovery with power button
Click to expand...
Click to collapse
of course bro, of course. i know that. the buttons won't work that is why i cannot get into any mode. i am stuck at that screen. now it seems like i fixed the problem by draining the battery and then it booted up normally. the problem now is that i will get into the bootloader unlocked screen even i do not press the power button when try charging the phone after its battery completely zero.
Stuck in EDL mode
abdinsyakirin said:
of course bro, of course. i know that. the buttons won't work that is why i cannot get into any mode. i am stuck at that screen. now it seems like i fixed the problem by draining the battery and then it booted up normally. the problem now is that i will get into the bootloader unlocked screen even i do not press the power button when try charging the phone after its battery completely zero.
Click to expand...
Click to collapse
I have a similar problem. My Axon 7 stuck in EDL mode, but no software can connect via USB. No button works, screen is of, no LED. Only sign of life is the 9008 com device in device manager, when I connect it with USB.
I've put it into the freezer right now, to wait until the battery drains. But I think it will take a while, because it was nearly full and the screen is off and not much energy is used for EDL mode.
Any other ideas guys?
mathop said:
I have a similar problem. My Axon 7 stuck in EDL mode, but no software can connect via USB. No button works, screen is of, no LED. Only sign of life is the 9008 com device in device manager, when I connect it with USB.
I've put it into the freezer right now, to wait until the battery drains. But I think it will take a while, because it was nearly full and the screen is off and not much energy is used for EDL mode.
Any other ideas guys?
Click to expand...
Click to collapse
Solution: Got it back to life by draining the battery in the freezer.
I am in the same position, but with no OS and now cannot get to TWRP. Toolkit and MiFlash do not see the device.
Heading for the freezer.
lsulliva said:
I am in the same position, but with no OS and now cannot get to TWRP. Toolkit and MiFlash do not see the device.
Heading for the freezer.
Click to expand...
Click to collapse
if they don't see the device, then you are not stuck in EDL...?
How do you see the phone in the device manager? Or do you see it at all?
Otherwise you're putting it in the freezer for pretty much nothing, as it'll still not be recognized after you charge it again. you might damage the battery (reduce its capacity).
Choose an username... said:
if they don't see the device, then you are not stuck in EDL...?
How do you see the phone in the device manager? Or do you see it at all?
Otherwise you're putting it in the freezer for pretty much nothing, as it'll still not be recognized after you charge it again. you might damage the battery (reduce its capacity).
Click to expand...
Click to collapse
Thanks C a u.
Sometimes it would show up and also as a device in windows! Please see attached image.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I had been flashing bootstackers and matching roms to no avail. Error 08 on TWRP twrp-3.2.3-0-ailsa_ii .
Now, after letting it just sit for a day (?battery discharged), it won't boot into even the warning screen and definitely no recovery.
Disconnected from the PC, Power button gives a brief red led flash. Power held gives a 3 sec red led. Power + Vol + and - in various combos , just the 3 sec led.
Attaching to the PC gives this white screen, which goes off after a couple of seconds. Power button brings it back on, and it stays on, until I disconnect from the PC. Holding power for 15 secs while connected turns the screen off, and pushing power again turns it back on, or sometimes it comes back spontaneously with a few lines across the screen.
Power & Vol +/- combos just bring back the white screen with a few more lines...
It does not show up in device manager, but momentarily is seen by Axon toolkit as an ADB!
Thanks for any guidance you can give.
---------- Post added at 01:59 PM ---------- Previous post was at 01:53 PM ----------
lsulliva said:
Thanks C a u.
Sometimes it would show up and also as a device in windows! Please see attached image.
I had been flashing bootstackers and matching roms to no avail. Error 08 on TWRP twrp-3.2.3-0-ailsa_ii .
Now, after letting it just sit for a day (?battery discharged), it won't boot into even the warning screen and definitely no recovery.
Disconnected from the PC, Power button gives a brief red led flash. Power held gives a 3 sec red led. Power + Vol + and - in various combos , just the 3 sec led.
Attaching to the PC gives this white screen, which goes off after a couple of seconds. Power button brings it back on, and it stays on, until I disconnect from the PC. Holding power for 15 secs while connected turns the screen off, and pushing power again turns it back on, or sometimes it comes back spontaneously with a few lines across the screen.
Power & Vol +/- combos just bring back the white screen with a few more lines...
It does not show up in device manager, but momentarily is seen by Axon toolkit as an ADB!
Thanks for any guidance you can give.
Click to expand...
Click to collapse
Oops, I am just registering for Imgur now. Sorry.
lsulliva said:
Thanks C a u.
Sometimes it would show up and also as a device in windows! Please see attached image.
I had been flashing bootstackers and matching roms to no avail. Error 08 on TWRP twrp-3.2.3-0-ailsa_ii .
Now, after letting it just sit for a day (?battery discharged), it won't boot into even the warning screen and definitely no recovery.
Disconnected from the PC, Power button gives a brief red led flash. Power held gives a 3 sec red led. Power + Vol + and - in various combos , just the 3 sec led.
Attaching to the PC gives this white screen, which goes off after a couple of seconds. Power button brings it back on, and it stays on, until I disconnect from the PC. Holding power for 15 secs while connected turns the screen off, and pushing power again turns it back on, or sometimes it comes back spontaneously with a few lines across the screen.
Power & Vol +/- combos just bring back the white screen with a few more lines...
It does not show up in device manager, but momentarily is seen by Axon toolkit as an ADB!
Thanks for any guidance you can give.
---------- Post added at 01:59 PM ---------- Previous post was at 01:53 PM ----------
Oops, I am just registering for Imgur now. Sorry.
Click to expand...
Click to collapse
You can just attach screenshots to xda, i can see them that way too.
I really want to see this white screen, that sounds very weird. If you can get it to be recognized as Qualcomm HS-USB QDLoader 9008 then you're going to be able to flash whatever from EDL Tool.
So this means you CAN enter TWRP? If you are in TWRP then your phone is just saved, because you just need to know what to flash...
Choose an username... said:
You can just attach screenshots to xda, i can see them that way too.
I really want to see this white screen, that sounds very weird. If you can get it to be recognized as Qualcomm HS-USB QDLoader 9008 then you're going to be able to flash whatever from EDL Tool.
So this means you CAN enter TWRP? If you are in TWRP then your phone is just saved, because you just need to know what to flash...
Click to expand...
Click to collapse
Thanks again
Here are the pics
lsulliva said:
Thanks again
Here are the pics
Click to expand...
Click to collapse
Cannot currently get to twrp.
I am trying to use this tool
to flash an edl ROM. Any suggestions which i should use?
https://forum.xda-developers.com/showpost.php?p=77926571&postcount=35
I just managed to flash A2017G_B10_FULL_EDL, but I had to hold vol+ and - throughout the process! I used Axon 7 toolkit and Miflash 2016.08.30.0. Just going to reboot and factory reset now. Thx for your help C a U.
lsulliva said:
I just managed to flash A2017G_B10_FULL_EDL, but I had to hold vol+ and - throughout the process! I used Axon 7 toolkit and Miflash 2016.08.30.0. Just going to reboot and factory reset now. Thx for your help C a U.
Click to expand...
Click to collapse
Now that I checked my response wasn't even sent lol. Good that you could fix it on your own. Just a heads up, you should use EDL Tool (or standalone MiFlash) instead of axon7toolkit, axon7toolkit is outdated and finicky already.

Categories

Resources