Database Users

[Q] Bricked? LG E612G

So I have a LG E612G from Chilean company Claro.
I have the bootloader unlocked, and I was using Cyagenmod beta for android 4.3, but the phone has a lot of lag and issues so I decided to go back to stock, so I downloaded the KDZ file and KDZ updater beside all the drivers needed, I have tried with several KDZ:
V20G_00
V20C_00
V20A_00
V10E_00
V10D_downgrade
I have tried using the KDZ updater in DIAG or emergency mode (I just haven't been able to get t he phone to download mode and not to emergency mode), but every time I get the same result, the phone reboot, makes the start sound and the LG logo appears on the screen (with an animation on the border of the "face") and thats all, the animation goes in to a loop and nothing happen even after a while.
I dont't know what else to do, I have followed both unbrick guides that appear here and they aren't working.
I have google the issue and everyone has been able to get their phone working again, I have tried with e612g and e610 kdz to see if that make any difference and nothing.
I don't know if this is important but every time that I have used the KDZ I remove the micro SD from the phone
Please I beg you, help me
P.S: I apologyze for my english as is not my native lenguage

CTuna said:
So I have a LG E612G from Chilean company Claro.
I have the bootloader unlocked, and I was using Cyagenmod beta for android 4.3, but the phone has a lot of lag and issues so I decided to go back to stock, so I downloaded the KDZ file and KDZ updater beside all the drivers needed, I have tried with several KDZ:
V20G_00
V20C_00
V20A_00
V10E_00
V10D_downgrade
I have tried using the KDZ updater in DIAG or emergency mode (I just haven't been able to get t he phone to download mode and not to emergency mode), but every time I get the same result, the phone reboot, makes the start sound and the LG logo appears on the screen (with an animation on the border of the "face") and thats all, the animation goes in to a loop and nothing happen even after a while.
I dont't know what else to do, I have followed both unbrick guides that appear here and they aren't working.
I have google the issue and everyone has been able to get their phone working again, I have tried with e612g and e610 kdz to see if that make any difference and nothing.
I don't know if this is important but every time that I have used the KDZ I remove the micro SD from the phone
Please I beg you, help me
P.S: I apologyze for my english as is not my native lenguage
Click to expand...
Click to collapse
First of all friend, as far as I know nothing can be done to unbrick a phone. If it can be fixed, its not a brick.
Can you get into cwm? (Power + Vol up + home and release power after beep on my phone.)

ayushag96 said:
First of all friend, as far as I know nothing can be done to unbrick a phone. If it can be fixed, its not a brick.
Can you get into cwm? (Power + Vol up + home and release power after beep on my phone.)
Click to expand...
Click to collapse
Now, He is able to boot in "recovery mode", But it's not a custom recovery like he used to have. It boots up in "LG service (Recovery mode)".
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Alternative
@CTuna
You can still try a hard reset..
When the phone is switched off, press and hold the Volume down key + Power key with your left hand.
When the LED on the bottom of the phone lights up, release Volume down key + Power keys and press and hold the Home key (for about 2 seconds) at the same time.
The phone will turn on and perform a factory reset immediately.
Do not operate your phone for at least a minute, while the hard reset is carried out.
You will then be able to switch your phone back on.​

Guys, it works, so if you ever came down here (I mean Chile) I will buy you a beer.
It now have android 4.1.2 and everything is working again
Thanks
Sent from my LG-P500h using xda app-developers app

iMiguelAcuna said:
Now, He is able to boot in "recovery mode", But it's not a custom recovery like he used to have. It boots up in "LG service (Recovery mode)".
Click to expand...
Click to collapse
I know it is an old post but how did you get "recovery mode" screen?
I have a LG E612G and I have tried with all button combinations in order to get that screen in my phone but nothing happens..
please help me with the right instructions

Lg E-612g error cyanogenmod 11 v 9.3
hello, when I press airplane mode in the notification bar and then turn off and turn on wifi the phone reboots and displays the following screen

Doowa said:
I know it is an old post but how did you get "recovery mode" screen?
I have a LG E612G and I have tried with all button combinations in order to get that screen in my phone but nothing happens..
please help me with the right instructions
Click to expand...
Click to collapse
with a locked bootloader on stock you can boot into download mode/emergency mode and hard reset
to boot into a custom recovery like cwm you must unlock the bootloader:good:

edgardg said:
hello, when I press airplane mode in the notification bar and then turn off and turn on wifi the phone reboots and displays the following screen
Click to expand...
Click to collapse
Thats a common problem. SKernel solves it. Meanwhile we have to wait to new beta

[REPAIRED!]LG G2 F320K deep&hard brick! REPAIRED now.

10/10 13:19 updated:
REPAIRED!I got my phone repaired...HERE is the method http://forum.xda-developers.com/showthread.php?t=2477595
Last night I began to try REPAIRING , but it still can not work...
Firstly Pardon me for my poor English...
The reason it stucked is that when i tried to get it back to stock firmware,the software(LG FLASH tool) warmed me with some unknown errors at the time it almostly finished... and after it restarted, it stucked in the starting LG screen...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Unable to enter download mode,instead,it entered fastboot mode
In fastboot mode,I successfully flashed boot.img, and recovery.img(CWM or TWRP) successfully flashed but could not start,and when I tried flashing system.img it failed
If I boot it directly with USB pluged, the computer will detect the port the same as which appears when you use kdz flashing.. But this port can not use for flashing kdz with LG Support tool, whether it is in diag mode or cs_emergency mode.
What's more,.tot file could not be flashed in by LG Flash Tool,too..
Sometimes,after some special action,it would appear a "qhsusb_bulk" unknown hardware on my computer , and then my computer tells me to format a bunch of "local driver"s
Current ideas:
1 Try to enter recovery from fastboot mode
(2) flash my phone whitout enter download mode
8/10 10:00 update ideas
a. extracted from the official kdz or tot, img could be flashed in in fastboot mode
b. Could You please send me some original DUMPed imgs in LG F320K? (Using Nandroid backup in CWM or TWRP)
Very thankful for your kindness！
10/10 00:30 updated
New discoveries！ boot with holding the volume + and power key for five seconds, it would enter the official Recovery (rescue mode) But if CWM or TWRP flashed it couldn't start..
Hold all the three keys to boot it would enter an unknown New World (look at the picture). . .
But now I have no idea of these two modes...I urgently need F320K dumped partition image! ! Please help me,my friend..Thx very much
Photos was taken with the OLD but faithful, never bricked, NEVER broke after fell down-my Nokia C6, but the quality of images is not good. . .
If this time I can repair it back form brick successfully,I will write down my operation in detail to help the guys who have the same problem as mine..
Very grateful for your help--even just a reply or subscribe!:good:

Have you tried removing the MicroUSB-cable while pressing PWR + Volume down?
That did the trick for me, and I'm pretty much in the same boat.
Remove USB-Cable -> Hold pwr + volume down -> restart -> hold pwr + volume down again when the LG-logo pops up.
Then -> LG Mobile Support Tool and recover from the menu there.
Takes FOREVER to download the software, but still. It works.
My issue now is that I only have 10GB left on my G2. Seems like it thinks its a 16GB instead of a 32GB. Wich annoys the booger out of me.
---------- Post added at 10:16 PM ---------- Previous post was at 10:11 PM ----------
1) Turn off the phone completely (or be superfast with the buttons)
2) Hold volume +
3) Connect the phone to the PC (MicroUSB)
4) Enjoy download-mode.
I'm pretty much in the same boat, and thats what I did to get mine working again.
Used downloadmode to reflash the original FW from the LG Mobile Support Tool.
My issue now is that I only have 10GB left on my G2. Seems like it thinks its a 16GB instead of a 32GB. Wich annoys the booger out of me.

dmbardal said:
Have you tried removing the MicroUSB-cable while pressing PWR + Volume down?
That did the trick for me, and I'm pretty much in the same boat.
Remove USB-Cable -> Hold pwr + volume down -> restart -> hold pwr + volume down again when the LG-logo pops up.
Then -> LG Mobile Support Tool and recover from the menu there.
Takes FOREVER to download the software, but still. It works.
My issue now is that I only have 10GB left on my G2. Seems like it thinks its a 16GB instead of a 32GB. Wich annoys the booger out of me.
---------- Post added at 10:16 PM ---------- Previous post was at 10:11 PM ----------
1) Turn off the phone completely (or be superfast with the buttons)
2) Hold volume +
3) Connect the phone to the PC (MicroUSB)
4) Enjoy download-mode.
I'm pretty much in the same boat, and thats what I did to get mine working again.
Used downloadmode to reflash the original FW from the LG Mobile Support Tool.
My issue now is that I only have 10GB left on my G2. Seems like it thinks its a 16GB instead of a 32GB. Wich annoys the booger out of me.
Click to expand...
Click to collapse
But now the problem, the tool can't detect what my phone is...It knows there's a LG phone but it can't get my phone's version...View attachment 2313927

press the menu on the top there.
The one to the left.
Then you choose "Recovery" or whatnot.
Then you can enter your IMEI-number to identify it.

---------- Post added at 10:16 PM ---------- Previous post was at 10:11 PM ----------
[/COLOR]1) Turn off the phone completely (or be superfast with the buttons)
2) Hold volume +
3) Connect the phone to the PC (MicroUSB)
4) Enjoy download-mode.
I'm pretty much in the same boat, and thats what I did to get mine working again.
Used downloadmode to reflash the original FW from the LG Mobile Support Tool.
My issue now is that I only have 10GB left on my G2. Seems like it thinks its a 16GB instead of a 32GB. Wich annoys the booger out of me.
Click to expand...
Click to collapse
Thx for your new method,BUT I CAN'T get into DOWNLOAD MODE,instead,It brings me into FASTBOOT MODE....
What's More,
I HATE THESE WORDS:
"To prevent spam to the forums, new users must wait five minutes between posts. All new user accounts will be verified by moderators before this restriction is removed."
What can I do to remove this restriction?
dmbardal said:
press the menu on the top there.
The one to the left.
Then you choose "Recovery" or whatnot.
Then you can enter your IMEI-number to identify it.
Click to expand...
Click to collapse
Because my phone isn‘t in download mode,this occurs every time....View attachment 2313955

Since you flashed recovery in fastboot, cant you just do "fastboot restart recovery" to get into it?

You get into fastbootmode when you have your phone off, then you hold the volume + and connect the phone to the computer aswell? :s

wargreymon89 said:
Since you flashed recovery in fastboot, cant you just do "fastboot restart recovery" to get into it?
Click to expand...
Click to collapse
er,no.it seems it doesn't have this command....View attachment 2313987
dmbardal said:
You get into fastbootmode when you have your phone off, then you hold the volume + and connect the phone to the computer aswell? :s
Click to expand...
Click to collapse
It seems that my DOWNLOAD MODE have been lost...What ever I do to my phone,this mode does not appear....

AND sometimes this happens when I try to fix my phone by LG Support Tool,,View attachment 2314009
But I'm really sure my battery is full 100%!! Strange things....

HI I have the same problem!! But My phone entering fastboot everytimes. No recovery, no download mode.

yarik88 said:
HI I have the same problem!! But My phone entering fastboot everytimes. No recovery, no download mode.
Click to expand...
Click to collapse
What's your phone's version? F320L/S/K or D802?

cms88168 said:
What's your phone's version? F320L/S/K or D802?
Click to expand...
Click to collapse
I have a F320K version korea. (((

same problem ... i have D802
only download mode and fastboot working
dont know what to do man ... this sux

I have a VS980. What part of TWRP b/u u need?
Sent from my VS980 4G using Tapatalk 4

yarik88 said:
I have a F320K version korea. (((
Click to expand...
Click to collapse
j_h3000 said:
same problem ... i have D802
only download mode and fastboot working
dont know what to do man ... this sux
Click to expand...
Click to collapse
trxrider31 said:
I have a VS980. What part of TWRP b/u u need?
Sent from my VS980 4G using Tapatalk 4
Click to expand...
Click to collapse
Goooooood NEWS Guys,I got my Brick repaired!!!!
I'll post my method later...because the ****ing 5 minute restriction...
Or you can go http://bbs.gfan.com/android-6735246-1-1.html,I posted there..(in Chinese)...

hey @ all
does this work with D80210A?

49% stucked
if you stucked like i was for 5 days, you can try this
http://forum.xda-developers.com/showpost.php?p=48266517&postcount=1046

cms88168 said:
Goooooood NEWS Guys,I got my Brick repaired!!!!
I'll post my method later...because the ****ing 5 minute restriction...
Or you can go http://bbs.gfan.com/android-6735246-1-1.html,I posted there..(in Chinese)...
Click to expand...
Click to collapse
Hey can you post your method in English? I have the exact same problem with my phone right now. Missing IMEI, phone restarts every 20 seconds, and I've tried reverting back to stock but now CWM is gone, as well as everything in the internal memory. Can you please share in your wisdom how to fix??
Thanks in advance.

My G2 can not go into download mode and recover mode, and my computer can not recognise it so I can not put anything into it.
when I hold Volume up and plug usb cable, its screen has a green robot with red exclamation! and I can go into recovery mode.
How can I do to wake up my phone?

I Bricked My LG G2 VS980 and have no idea what to do
So a couple days ago, I rooted my phone, and everything worked perfectly. Today I tried to install cyanogenmod 11 onto my LG G2 VS980 with Kitkat 4.2.2. I wiped everything on my phone except for the Internal sd card, and installed it. However, when I rebooted my phone, cyanogenmod didn't boot, and my phone is unable to get past the LG logo. It is in a bootloop, and keeps powering on and off unless I turn it off with the power button.
Any help would be greatly appreciated! Thanks!

[Guide] Return-To-Stock [V400]

Here is a quick guide for those who need to return to Stock. This has been tested on my LG Pad 7.0 (WiFi Edition), which I was customizing after rooting, and something went wrong. I took a couple of hours trying to get an official copy of the stock firmware, and once I got my device back up and running decided to post a guide for future reference.
Keep in mind that this replaces all the system files on the tablet that might have been removed, modified, or replaced. Please MAKE A BACKUP OF YOUR PICTURES, MUSIC, OR DOCUMENTS.
Quick disclaimer though, I'm not responsible if you tablet somehow freaks out, and cannot be used anymore, but the likeliness of this happening is about as likely as you winning the lottery, so if it does, you might want to buy a lottery ticket. I also recommend that you reset your tablet in case there is any complications.
---------------------------------------------------
STEP ONE
---------------------------------------------------
Download the following files below:
LG Driver: Download Here
LG Tools 2014: Download Here
LG Firmware: Download Here
---------------------------------------------------
STEP TWO
---------------------------------------------------
Install the LG Driver onto your computer, then reboot.
---------------------------------------------------
STEP THREE
---------------------------------------------------
Extract the LG Tools 2014 FOLDER to your DESKTOP.
---------------------------------------------------
STEP FOUR
---------------------------------------------------
Move the FIRMWARE to the LG TOOLS 2014 FOLDER on your desktop. *Will make it easier to locate when needed*
---------------------------------------------------
STEP FIVE
---------------------------------------------------
TURN OFF your tablet! Plug your USB WIRE into a USB slot on your machine. When it's plugged in, hold on the Volume UP button on the tablet and at the same time plug in the USB wire. Hold onto the volume button until you see the follow:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------------------------------------------------
STEP SIX
---------------------------------------------------
OPEN the LG Tools Folder, you should have the following:
Click on the LGFLASHTOOL2014 file. Then you should see this:
You need to make sure that the Select Type is 3GQCT, and the PhoneMode is EMERGENCY. Also, Select the KDZ file (Firmware) that you placed in the the LG Tools 2014 folder. Then Press Normal Flash.
This should popup right after, and you just need to click start. Then another thing (below) should pop up.
Just click OK Reason why is that your device will use English as it's default regardless. Now once you see this (below) sit back and wait. Shouldn't take no longer then 15 - 30 minutes.
Congrats! Your device should be completely up and running again!

Do you have access to the ATT LTE LG V410 firmware? I have looked all over for it

Do you mind sending me a private message?

v700
Where can i finde firmware for lg v700 ?

Please inbox me.

Marko-xdw said:
Where can i finde firmware for lg v700 ?
Click to expand...
Click to collapse
no need to download the firmware.
go here: http://www.lg.com/pt/suporte-telemovel/lg-LGV700# (US version of the website only has the drivers to download)
download and install LG mobile on the second step (Passo 2 wich means step 2):
Choose your country and language on the program
Follow the steps given by the program to first install the drivers, wich for me didnt worked, had to plug in my v700 in MTP mode, then while plugged in click here:
It will install the drivers.
After that the program will recognize the tablet with no issues.
To make sure u will have later the firmware downloaded, just run the upgrade recovery, it will flash the stock rom again on ur tablet without wiping data (dont know if u will loose root, but u probably will).

Thx

Thanks
I posted a link to this thread at
http://forum.xda-developers.com/g-pad-10/general/recovery-cwm-6-0-5-1-lg-v400-aka-lg-g-t2961102
to let them know this fix works great. Thanks. It saved me a lot of stress.

In download mode none of my computers work. Running XP and 7, They all says LG MTP Device Cannot Start. Any ideas?

V400
Thanks a lot for your guide. I used it today and it works, but I used the knockcode and he's starting now in Safe mode without to use the knockcode. I tried to start again as you describe in your guide but it seems not to work.
Do you know a solution?
Thanks
Wim
QUOTE=Jisaeus;56293020]Here is a quick guide for those who need to return to Stock. This has been tested on my LG Pad 7.0 (WiFi Edition), which I was customizing after rooting, and something went wrong. I took a couple of hours trying to get an official copy of the stock firmware, and once I got my device back up and running decided to post a guide for future reference.
Keep in mind that this replaces all the system files on the tablet that might have been removed, modified, or replaced. Please MAKE A BACKUP OF YOUR PICTURES, MUSIC, OR DOCUMENTS.
Quick disclaimer though, I'm not responsible if you tablet somehow freaks out, and cannot be used anymore, but the likeliness of this happening is about as likely as you winning the lottery, so if it does, you might want to buy a lottery ticket. I also recommend that you reset your tablet in case there is any complications.
---------------------------------------------------
STEP ONE
---------------------------------------------------
Download the following files below:
LG Driver: Download Here
LG Tools 2014: Download Here
LG Firmware: Download Here
---------------------------------------------------
STEP TWO
---------------------------------------------------
Install the LG Driver onto your computer, then reboot.
---------------------------------------------------
STEP THREE
---------------------------------------------------
Extract the LG Tools 2014 FOLDER to your DESKTOP.
---------------------------------------------------
STEP FOUR
---------------------------------------------------
Move the FIRMWARE to the LG TOOLS 2014 FOLDER on your desktop. *Will make it easier to locate when needed*
---------------------------------------------------
STEP FIVE
---------------------------------------------------
TURN OFF your tablet! Plug your USB WIRE into a USB slot on your machine. When it's plugged in, hold on the Volume UP button on the tablet and at the same time plug in the USB wire. Hold onto the volume button until you see the follow:
---------------------------------------------------
STEP SIX
---------------------------------------------------
OPEN the LG Tools Folder, you should have the following:
Click on the LGFLASHTOOL2014 file. Then you should see this:
You need to make sure that the Select Type is 3GQCT, and the PhoneMode is EMERGENCY. Also, Select the KDZ file (Firmware) that you placed in the the LG Tools 2014 folder. Then Press Normal Flash.
This should popup right after, and you just need to click start. Then another thing (below) should pop up.
Just click OK Reason why is that your device will use English as it's default regardless. Now once you see this (below) sit back and wait. Shouldn't take no longer then 15 - 30 minutes.
Congrats! Your device should be completely up and running again![/QUOTE]

Hi! I badly need help.. after flashing my lg v400 tab it won't play videos on facebook or youtube.. can you help me please??

Problem
I have a problem: I installed the firmware, but the tablet is turned on, there is a logo of LG, disappears, and knitted appears and disappears again, and so on without end.

Yarkoone said:
I have a problem: I installed the firmware, but the tablet is turned on, there is a logo of LG, disappears, and knitted appears and disappears again, and so on without end.
Click to expand...
Click to collapse
You need to do Hard Reset (reset to factory defaults)
Turn off the power of the tablet.
Press and hold the Power / Lock button + volume down on the right side of the tablet.
Release the Power / Lock button and volume down when the LG logo is displayed on the screen.
Simultaneously press and hold the Power / Lock button + Volume Up + Volume Down button until the screen is a hardware reset.
Release all buttons after the display screen The hardware reset.
To continue, press the Power / Lock, or one of the volume buttons to cancel.
To confirm it, press Power / Lock, or one of the volume buttons to cancel.
On the device will perform a hard reset.

Use LG's support tool and 'Upgrade Recovery'
SORRY I JUST REALIZED THIS QUESTION HAS BEEN ANSWERED BEFORE..
Marko-xdw said:
Where can i finde firmware for lg v700 ?
Click to expand...
Click to collapse
MAKE SURE TO BACKUP YOUR STUFF: photos, contacts, emails, files, whatever.
Download the official tool from here:
tool.xcdn.gdms.lge.com/client/app/B2CAppSetup.exe
launch the tool
plug in your device
install USB drivers if needed
let the tool detect your device
Start Upgrade. (OR click options > upgrade recovery)
Good luck! :good:
P.

Solyar said:
You need to do Hard Reset (reset to factory defaults)
Turn off the power of the tablet.
Press and hold the Power / Lock button + volume down on the right side of the tablet.
Release the Power / Lock button and volume down when the LG logo is displayed on the screen.
Simultaneously press and hold the Power / Lock button + Volume Up + Volume Down button until the screen is a hardware reset.
Release all buttons after the display screen The hardware reset.
To continue, press the Power / Lock, or one of the volume buttons to cancel.
To confirm it, press Power / Lock, or one of the volume buttons to cancel.
On the device will perform a hard reset.
Click to expand...
Click to collapse
Although this method is stated the same way in the manual of the V400 it is wrong,
It rather works this way:
1. Powe off the tablet.
2. Hold the volume down button, then press the power button, when the tablet turns on, release the volume down button but then immediately press it again.
3. A menu appears and asks for hard factory reset. Go down to "Yes" with the volume up button, press the power button to confirm. Do the same thing on the next question.
4. The tablet reboots and should be now ok again.

Downgrading my LG Gpad 7.0 (Lollipop To KITKAT)
hello Mates'
I'm Using Lg Gpad 7 (Running Lollipop)
Actually i don't like the lollipop update .. kitkat is much better ..
I'm thinking if i can downgrade my Android software, (is that possible)
I found this on LG Website is this the firmware for my Tab?
Could you please help me out on how to flash this firmware on my tab?

Update to lollipop for LG G7-V400
I update to lollipop but thought it was not really better then 4.4.2. rooted.
After I unroot from 4.4.2. to 5.02 Lollipop I decide to downgrade to 4.4.2. and then I softbricked my V400 wifi.
The only problem I have is that I am missing is V40020A the kdz file to return back to lollipop, because the problem is you can't downgrade to 4.4.2, that's the reason for softbrick
The links from xda like http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW336ZU032JMAJ3AE810MKZ/V40020a_00.kdz like someone was showing up here , giving an error "empty response"and my dns servers are ok, so that's not the problem.
Would love someone is giving the right link to Lollipop KDZ file V40020
May God bless you all.
Wim
---------- Post added at 01:34 PM ---------- Previous post was at 01:16 PM ----------
qhuinzy_09 said:
hello Mates'
I'm Using Lg Gpad 7 (Running Lollipop)
Actually i don't like the lollipop update .. kitkat is much better ..
I'm thinking if i can downgrade my Android software, (is that possible)
I found this on LG Website is this the firmware for my Tab?
Could you please help me out on how to flash this firmware on my tab?
Click to expand...
Click to collapse
If you downgrade you get the same problem as I have, loop in a boot still restarting and a hard reset is impossible
Maybe you can help me where I can download the v40020a the lollipop KDZfile to return back to lollipop
Be carefull with downgrading and if you succeed in downgrade, let me know.
Wim

It is definitely possible to downgrade to 4.4.2. I flashed my V400 with the update tool to Lollipop but didn´t like it. I just flashed the firmware(it is KitKat) linked in the OP with the 2014 tools, then made a factory reset, everything works fine again.

Simon Shatter said:
It is definitely possible to downgrade to 4.4.2. I flashed my V400 with the update tool to Lollipop but didn´t like it. I just flashed the firmware(it is KitKat) linked in the OP with the 2014 tools, then made a factory reset, everything works fine again.
Click to expand...
Click to collapse
Can you help me out Mate ?
I'm Noob in LG :fingers-crossed:
Do you have links or thread reference ? it will be very helpful to follow step by step procedures
Thank you

qhuinzy_09 said:
Can you help me out Mate ?
I'm Noob in LG :fingers-crossed:
Do you have links or thread reference ? it will be very helpful to follow step by step procedures
Thank you
Click to expand...
Click to collapse
Heres a link. In the first post theres a link to the firmware! Just follow directions http://forum.xda-developers.com/g-pad-10/general/guide-return-to-stock-t2919039

Axon 7 bricked and I'm in a very tight situation. Any quick solution?

To sum it up quickly, I put my Axon 7 up for sale on ebay. 5 day listing. It currently has ~24 hours left on it and plenty of bidders. ZTE Gladly offered a replacement but it would take 10 or more days. I had previously rooted the phone, and wanted to send it as though it came from the factory. I went into fastboot, did 'fastboot oem lock' over the fastboot shell, and it said successful. The device "rebooted" into a black screen. The device now appears to be bricked. It will show a ZTE logo for about a second when I hold the power button and then no more. I cannot seem to get it respond to a charge, go into fastboot, recovery, or anything else except what I described. It sounds hopeless to me, but maybe someone here is a miracle worker. Thank you very much.

for starters which model to you have?

You were completely stock, not rooted before locking?

lafester said:
You were completely stock, not rooted before locking?
Click to expand...
Click to collapse
I had flashed CM to it previously but when I did a relock I had reflashed stock MiFavor found here on XDA.
Edit: TWRP official a2017u was on the device, and I may have flashed supersu as well during the stock reflash. It was almost a week ago, I can't remember.
DrakenFX said:
for starters which model to you have?
Click to expand...
Click to collapse
A2017U

erer1243 said:
I had flashed CM to it previously but when I did a relock I had reflashed stock MiFavor found here on XDA.
A2017U
Click to expand...
Click to collapse
If you can boot to recovery you can try using ZTE B20 file, look here https://www.zteusa.com/axon-7#support under SOFTWARE UPDATES
* Move that file to your SDCard ,
* Boot to your recovery and flash that file.

DrakenFX said:
If you can boot to recovery you can try using ZTE B20 file, look here https://www.zteusa.com/axon-7#support under SOFTWARE UPDATES
* Move that file to your SDCard ,
* Boot to your recovery and flash that file.
Click to expand...
Click to collapse
I cannot boot into recovery. I cannot do anything except what I described, the quick ZTE logo, and then nothing. The computer does recognize that there is a device plugged in though, but ADB and fastboot will not see it.

erer1243 said:
I cannot boot into recovery. I cannot do anything except what I described, the quick ZTE logo, and then nothing. The computer does recognize that there is a device plugged in though, but ADB and fastboot will not see it.
Click to expand...
Click to collapse
not even Manual boot to recovery?
Press & Hold Volume Up + Power till menu kicks in.
you other option booting to EDL and use @tennear or tenfar tool to flash TWRP ONLY and flash that file or my B29.MergeBootstack and StockSystem files

DrakenFX said:
not even Manual boot to recovery?
Press & Hold Volume Up + Power till menu kicks in.
you other option booting to EDL and use @tennear or tenfar tool to flash TWRP ONLY and flash that file or my B29.MergeBootstack and StockSystem files
Click to expand...
Click to collapse
Nothing happens. It will not go into fastboot or recovery, no matter what I hold, for how long, anything. I believe it is either trying to display the "Your device cannot be trusted" screen and fails or is trying to do some other thing during pre-boot and is stuck in a loop. I don't know what EDL is but I'd be willing to tear this phone a new asshole if I can fix it within 24 hours. Happy to try anything, it seems like it can't get any worse than this.

erer1243 said:
I believe it is either trying to display the "Your device cannot be trusted"
Click to expand...
Click to collapse
this means, you still UNLOCK, when you are there and i mean when that message shows up, press any of the volume key and will give you a menu, from there you can boot to recovery - fastboot - bootloader.
if you see that menu, BOOT to BOOTLOADER and tell me the status.

DrakenFX said:
this means, you still UNLOCK, when you are there and i mean when that message shows up, press any of the volume key and will give you a menu, from there you can boot to recovery - fastboot - bootloader.
if you see that menu, BOOT to BOOTLOADER and tell me the status.
Click to expand...
Click to collapse
Well I just successfully locked it before making the thread... So it is not unlocked any longer. That was just speculation. I have no menus, holding down volume buttons and power does not do anything, I cannot get into fastboot, recovery, etc at all.

erer1243 said:
Well I just successfully locked it before making the thread... So it is not unlocked any longer. That was just speculation. I have no menus, holding down volume buttons and power does not do anything, I cannot get into fastboot, recovery, etc at all.
Click to expand...
Click to collapse
you know how to manually boot to EDL? so you can use any of the tool to flash TWRP.
manually booting to EDL and to make sure is in EDL mode CONNECT your device to your PC/Laptop and open DEVICE MANAGER now just Hold & Press Vol. Up and Down and make sure you are pressing both , if you are using case take the phone out of the case so you can really do it. Once you are pressing and holding both volume keys, press Power and check Device Manager for Qualcomm Port your device is using.
after that just proceed with the rest.

Just to make it a little clearer, to go to EDL mode. Phone must be off when you connect to PC, you hold both volume up/down and then touch power. It will still remain off BUT should now be recognized by the PC's device Manager.

I was in the same situation before. Using tenfar's tool to flash tenfar's TWRP (not official TWRP) the phone will boot TWRP with a locked bootloader. Then, go https://www.zteusa.com/axon-7 there and click the Support tab, then the Software Updates subsection. Download that, it could take a while though.
Once that's done, open the update.zip in something like 7-Zip and navigate to META-INF\com\google\android and extract the file updater-script. Open it with Notepad++ (not Notepad) or, if you're not on Windows, the text editor of your choice.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
On line 2, which is highlighted, delete that line. If you don't do this, it won't flash in TWRP. Don't worry though, it won't mess anything up. After saving, drag the extracted updater-script back into the zip file and confirm that you want to replace it.
Then, once your phone is in TWRP, copy the update.zip to your phone and flash it. For me, it took about 7 or 8 minutes to flash.
This part is the most important, absolutely do not skip this:
Before you reboot go back to the main TWRP menu and open the Mount menu. Uncheck system and then reboot. This is because TWRP installs a survival script in /system if it can, because otherwise TWRP will be changed to stock recovery. In this case though, it's what we want. This way OTA updates will successfully install. Stock recovery checks for any changes to /system and refuses to work if it sees any change at all, like the one TWRP makes unless you unmount system before you reboot.
After rebooting, you should update your phone from B20 to B27 and then from B27 to B29 to be up to date.
Also, this will re-lock your bootloader!
If you have any questions please ask, hopefully that helped you and maybe others too

RainofOranges said:
I was in the same situation before. Using tenfar's tool to flash tenfar's TWRP (not official TWRP) the phone will boot TWRP with a locked bootloader.
Click to expand...
Click to collapse
Maybe I just haven't looked hard enough... but I can't find any working instructions on how to flash/boot to a recovery. When I go by his instructions, nothing seems to work. I have, in the same folder as axon7root.exe, a recovery.img that is tenfar's twrp release. I have installed the driver he linked. I run axon7root -p 4 -r (yes, my phone is connected to the COM4 port) and the program just prints his little copyright splash screen and nothing happens. I have left it for ~half an hour, so it's obviously not just taking it's time. When I unplug the phone, it tells me my horse is dead (lmao someone get on translation) so it obviously knows the phone is there, but it just cannot do anything. Also, I cancelled the ebay listing a few minutes before seeing your post, disappointingly. Hopefully I can revive my horse and relist it.

erer1243 said:
Maybe I just haven't looked hard enough....
Click to expand...
Click to collapse
Are you sure your phone is in EDL mode? Did you try running it through a command promp as Administrator?

RainofOranges said:
Are you sure your phone is in EDL mode? Did you try running it through a command promp as Administrator?
Click to expand...
Click to collapse
I will try running it as admin. I am unsure how to tell if my phone is in EDL mode. I have reason to believe that it is stuck in a silent boot loop and maybe I can't get it into EDL/any other mode but I am just speculating there. I think that because 1, it won't respond to a charge and 2, I have to hold down the power button much longer than usual to make the ZTE logo pop up; It's as though I had to force shut down the phone and then boot it again in the 1 press.

erer1243 said:
Maybe I just haven't looked hard enough... but I can't find any working instructions on how to flash/boot to a recovery. When I go by his instructions, nothing seems to work. I have, in the same folder as axon7root.exe, a recovery.img that is tenfar's twrp release. I have installed the driver he linked. I run axon7root -p 4 -r (yes, my phone is connected to the COM4 port) and the program just prints his little copyright splash screen and nothing happens. I have left it for ~half an hour, so it's obviously not just taking it's time. When I unplug the phone, it tells me my horse is dead (lmao someone get on translation) so it obviously knows the phone is there, but it just cannot do anything. Also, I cancelled the ebay listing a few minutes before seeing your post, disappointingly. Hopefully I can revive my horse and relist it.
Click to expand...
Click to collapse
Mine did that - unplug phone, restart computer, hold both volume buttons and plug phone back in.

erer1243 said:
I will try running it as admin. I am unsure how to tell if my phone is in EDL mode. I have reason to believe that it is stuck in a silent boot loop and maybe I can't get it into EDL/any other mode but I am just speculating there. I think that because 1, it won't respond to a charge and 2, I have to hold down the power button much longer than usual to make the ZTE logo pop up; It's as though I had to force shut down the phone and then boot it again in the 1 press.
Click to expand...
Click to collapse
You can't tell that the phone is in EDL mode on the phone itself. You can only tell by trying the tool. If I remember right the button combination to get into EDL mode is both volume buttons held down and the power button also held down for 2 seconds or so at the same time.

tabletalker7 said:
Mine did that - unplug phone, restart computer, hold both volume buttons and plug phone back in.
Click to expand...
Click to collapse
No dice. As admin, computer restarted, I tried holding both volume buttons while plugging in.

update from my last post: I got tenfar's tool to upload his TWRP to the phone (sent it to the horse o.o) but it still will not boot anywhere. The phone has not changed at all.

No Fastboot?

So I'm getting stuck on the nexus boot screen and the OS will not load. Decided to to just flash the stock image and start from scratch. I'm able to get into stock recovery but unable to boot into Fastboot/bootloader from there. It just kicks me back to try and start the OS. When I get to the loading screen it shows dead Andy with a triangle and "no command" instead of being able to select recovery/bootloader/start system normal. I am unlocked and was running the stock image 8.0.0 before all this happened. No root. I've been reading that asus or nexus screwed something up. So am I bricked? I've tried to adb sideload from recovery but in getting a verification error.
Edit: Problem solved. I'm an idiot. There is a lag for when the NP Google logo comes on till the screen actually recognizes and shows up. Therefore, I was holding the button too long and it passing fastboot and going directly into recovery.

I'm stuck at the same point and thinking that i am just holding the reset button too long.
Got any idea on how long you held it for? I just seem to go directly into recovery and get no access to fastboot to do anything...

pegaxs said:
I'm stuck at the same point and thinking that i am just holding the reset button too long.
Got any idea on how long you held it for? I just seem to go directly into recovery and get no access to fastboot to do anything...
Click to expand...
Click to collapse
I honestly cannot remember, Maybe 3 to 5 seconds? As soon as I see that there is a signal yo the TV I let go. I know that if you do hold the button to long that it will go directly into recovery. Just start timing it at a point when you plug the power cord in and start working from there.

Hold the button / watch the LED
pegaxs said:
I'm stuck at the same point and thinking that i am just holding the reset button too long.
Got any idea on how long you held it for? I just seem to go directly into recovery and get no access to fastboot to do anything...
Click to expand...
Click to collapse
When you apply power the tiny led lights up solid. You should hold the button down until you see the light change to a blinking response, then let go. After that you will see the Google unlock and then you will get the fastboot screen.

I wish it was that easy. I have tried that. I can get the device into the recovery menu, but not into fastboot.
From the recovery menu, I can select “reboot into fastboot” but it just goes back into the bootloop “Google” screen.
The other issue is that the light never flashes. If I hold the button down, it just either reboots, or never flashes.
If I release the button when the Google logo comes up, it will go to the laying down Android with open chest and red exclamation mark in a triangle and the words “no command” under it.
If I press and hold the reset button for 5 seconds, then release it, it will boot into recovery, where I can select a few things.
When in recovery, the only thing I can get to connect to my PC is “sideload”. If I try and side load anything, such as magisk, I just get verification errors.
I cannot get the device to connect as a device. I cannot get it into fastboot. I have done nothing else too it. It was working last week when I turned it on, albeit YouTube wasn’t, and on the weekend I went to use it and it was dead and showing the “Google” logo screen.
So, unfortunately, due to there not being a “flashing” led, there seems to be no way of getting into fastboot.
I have even tried OP’s suggestion of timing the button hold and resetting at intervals of seconds, and this has also not worked, from 1 second all the way to 30 seconds...

let me add a "me too" Can't get into fastboot...even using adb reboot bootloader just reboots to recovery.

SOLVED
bigworm50 said:
let me add a "me too" Can't get into fastboot...even using adb reboot bootloader just reboots to recovery.
Click to expand...
Click to collapse
Can't you do an OTA image using recovery mode? Solution for me was to reflash using android 8 with the full google tool kit, doesn't work with a partial toolkit.

Same story here. Can't do OTA update either. I have a full kit too. I'm getting an error saying this update is for "fungu" devices. This is "". This probably means that it can't read even the device type. This is really horrible what Google has done! I tried loading different OTA versions as well. Same error.
Ideas?
CVZAYIN said:
Can't you do an OTA image using recovery mode? Solution for me was to reflash using android 8 with the full google tool kit, doesn't work with a partial toolkit.
Click to expand...
Click to collapse

SOLVED
nonamer88 said:
Same story here. Can't do OTA update either. I have a full kit too. I'm getting an error saying this update is for "fungu" devices. This is "". This probably means that it can't read even the device type. This is really horrible what Google has done! I tried loading different OTA versions as well. Same error.
Ideas?
Click to expand...
Click to collapse
NEXUS PLAYER IS THE FUGU OS
Went to the google Nexus images download page to get Android 8 OS and the platform tools (factory img). Installed the Win10 USB driver and then unzipped only the main first img zip file into the platform tools root folder. Enabled NP developer mode and enabled USB debugging according to google NP image download page instructions. Then restart NP into fastboot mode by holding the button down while plugging it in, holding button only until you see fast flashing LED will put you into fastboot mode. On PC, open command prompt and navigate to platform tools folder, then unlocked the device and ran the flash-all.bat file (see instructions). Bingo. If fastboot mode not available, you may want to see some of the youtube nexus bootloop videos on how to get into recovery mode and flash the OTA img instead. Flashing with Android 8 should free up about a gig of disk space. I relocked mine afterwards. Hope this helps.

CVZAYIN said:
Then restart NP into fastboot mode by holding the button down while plugging it in, holding button only until you see fast flashing LED will put you into fastboot mode.
Click to expand...
Click to collapse
NOT SOLVED
Did you not read the part where I and other users said there is no flashing LED and there is no fastboot?
I got my old NP out today to follow your solution and I am still at my original problem. I cannot even get into fastboot. I can get to stock recovery, but that’s it. I cannot even use that to reboot into fastboot, as it just goes back to the bootlooping google logo screen.
I can get very limited ADB access to sideload, but that is it. No root. No fastboot commands.
I solved the issue by putting it in a box, forgetting about it and buying an Apple TV box.

pegaxs said:
NOT SOLVED
Did you not read the part where I and other users said there is no flashing LED and there is no fastboot? I got my old NP out today to follow your solution and I am still at my original problem. I cannot even get into fastboot. I can get to stock recovery, but that’s it. I cannot even use that to reboot into fastboot, as it just goes back to the bootlooping google logo screen. I can get very limited ADB access to sideload, but that is it. No root. No fastboot commands. I solved the issue by putting it in a box, forgetting about it and buying an Apple TV box.
Click to expand...
Click to collapse
Wasn't my issue, but I'd mentioned earlier having seen where OTA images can be installed using recovery mode to resolve the bootlooping.
https://www.youtube.com/watch?v=Vscps1gNn0U
https://www.theandroidsoul.com/ota-bootloop-fix-nexus-6-6p-5x-9-9g-and-player/

Anyone else able to get past this? I get the following when i try to sideload the ota through the recovery.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://drive.google.com/file/d/1KglLdXeyOdPqm8ktKe8jAZzz0X6-uNsL/view?usp=drivesdk
CVZAYIN said:
Wasn't my issue, but I'd mentioned earlier having seen where OTA images can be installed using recovery mode to resolve the bootlooping.
https://www.youtube.com/watch?v=Vscps1gNn0U
https://www.theandroidsoul.com/ota-bootloop-fix-nexus-6-6p-5x-9-9g-and-player/
Click to expand...
Click to collapse