Database Users

[HELP] Samsung Galaxy Y dead by Rom Manager

last following this thread
http://forum.xda-developers.com/showthread.php?t=1404014
after im press Reboot into Recovery, my devices are dead
how to fix my phone?

mr.snax said:
last following this thread
http://forum.xda-developers.com/showthread.php?t=1404014
after im press Reboot into Recovery, my devices are dead
how to fix my phone?
Click to expand...
Click to collapse
Can you
A. See ANYTHING at all when you power on??
B. can bring up recovery mode using Vol+ + Home + Power?
C. can bring up download mode using vol- + Home + Power?
If yes.. then its not dead..
If no.. then goto a service center and play dumb .

noobwithgalaxyy said:
Can you
A. See ANYTHING at all when you power on??
B. can bring up recovery mode using Vol+ + Home + Power?
C. can bring up download mode using vol- + Home + Power?
If yes.. then its not dead..
If no.. then goto a service center and play dumb .
Click to expand...
Click to collapse
A. no, it's still OFF
B. I tried to Recovery Mode, but can't turn on
C. I tried to Download Mode too, but can't turn on
Anyone can help me? without bring it to services center?

Thats bad...
seems a hard brick..

yeah its sucks when noobies started the threat and say worked !
now my devices currently brick and wanna going to samsung services center

When u connect it to a pc does usb conn promt? Or not?
If so flash it in odin. Hardbricks were restored thru there with the dxkk4 asia i guess. But well. Try it
Sent from my GT-S5360 using xda premium

He can't get into download mode..
Jig maybe?

Take battery out. Plug usb in comp or car charger. Hold volume down keep holding and plug in usb
Sent from my MIUI.us Sensation 4G using XDA App

i found some solution for u
dear friend i found some solution for u try this
Hard Brick Solution
Soft Bricks Solutoin
may be its work for u.....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

never use anything ment for other devices
mr.snax said:
last following this thread
http://forum.xda-developers.com/showthread.php?t=1404014
after im press Reboot into Recovery, my devices are dead
how to fix my phone?
Click to expand...
Click to collapse
uve' been hardbricked
goto service center and tell them u were updating frm kises and had a power cut
if your device is fixed use the zip file *attachment
__
just flash it using your default recovery

my Y dead a lot of times... to back it to on..
i just pull out the batter and plug it into charger without battery then put my battery back then it works.... run into recovery.. data wipe/reset factory then turn off again your phone. turn it on again and install rom you like..

I think rom manager doesnt support our phone. But it was displayed in the market
Sent from my GT-S5360

mrdoods said:
my Y dead a lot of times... to back it to on..
i just pull out the batter and plug it into charger without battery then put my battery back then it works.... run into recovery.. data wipe/reset factory then turn off again your phone. turn it on again and install rom you like..
Click to expand...
Click to collapse
Really? Gonna try it!
Sent from my GT-S5360

[SOLUTIONS]
jeffcleds said:
Really? Gonna try it!
Sent from my GT-S5360
Click to expand...
Click to collapse
mrdoods said:
my Y dead a lot of times... to back it to on..
i just pull out the batter and plug it into charger without battery then put my battery back then it works.... run into recovery.. data wipe/reset factory then turn off again your phone. turn it on again and install rom you like..
Click to expand...
Click to collapse
I don't know so much things. But at my time i was recovered from there exactly in the same way without even know it.
Astonished, the problem who face didn't update about the issue, WHY ?

thought that thread was closed.... asked a long time ago i've said on page 2 this is not working beacause i couldn't edit it back then
btw how did you find suck an old post?

it shows on galaxy y logo

mr.snax said:
last following this thread
http://forum.xda-developers.com/showthread.php?t=1404014
after im press Reboot into Recovery, my devices are dead
how to fix my phone?
Click to expand...
Click to collapse
DO THIS ONLY WHEN YOU PLUG IN YOUR PHONE AND NOTHING SHOWS UP ON THE SCREEN!!!
This method is basically same as the normal stock rom flashing tut, EXCEPT the way you get into Download Mode as your phone is HARD BROKEN.
1. Download all the files required in the "SOFT BRICKS" Prob, (Just Google that)
. 2. Remove everything from your phone (SD card, sim, battery).
3. Plug your phone into your computer WITHOUT the battery.
4. Press and HOLD vol. up and vol. down.
5. As you are HOLDING these buttons, reattach your battery.
6. You should be in Download Mode.
7. Now flash ur Stock rom via odin...
---------- Post added at 12:57 PM ---------- Previous post was at 12:52 PM ----------
mr.snax said:
last following this thread
http://forum.xda-developers.com/showthread.php?t=1404014
after im press Reboot into Recovery, my devices are dead
how to fix my phone?
Click to expand...
Click to collapse
naresh9952924146 said:
it shows on galaxy y logo
Click to expand...
Click to collapse
DO THIS ONLY WHEN YOU PLUG IN YOUR PHONE AND NOTHING SHOWS UP ON THE SCREEN!!!
This method is basically same as the normal stock rom flashing tut, EXCEPT the way you get into Download Mode as your phone is HARD BROKEN.
1. Download all the files required in the "SOFT BRICKS" Prob, (Just Google that)
. 2. Remove everything from your phone (SD card, sim, battery).
3. Plug your phone into your computer WITHOUT the battery.
4. Press and HOLD vol. up and vol. down.
5. As you are HOLDING these buttons, reattach your battery.
6. You should be in Download Mode.
7. Now flash ur Stock rom via odin...
thank me if it wrks

Problem still persists
Hi everyone!
I had this very same problem. It's my sister's phone. She was promted to install update (I think it was firmware, but not sure). Anyway, the update was stuck at 86%. She lost the nerves and turned off the phone during install athough she shouldn't have. Then the phone was stuck at Samsung logo screen. I did some web browsing, and flashing using odin came up as a perfect solution for me. And I did it! Everything seemed perfect until the end. And just as I thought I finished, and did everything right, the phone (that was still in progres of flashing) just turned off and now I can't get it to do ANYTHING AT ALL since!
I've tried everything I found on web, inclouding suggestions from this forum, trying with usb cable and without battery, but nothing worked! It's simply dead!
Can anyone suggest anything new before I take it to samsug service?
Thanx in advance!

Try to flash with ODIN.. by this method
1. Remove ur battery
2. connect phone without battery
3. press volume up/down + home key
now your phone must be Download mode
4. Now Connect your battery
try to flash now & reply..

Still nothing
amtra said:
Try to flash with ODIN.. by this method
1. Remove ur battery
2. connect phone without battery
3. press volume up/down + home key
now your phone must be Download mode
4. Now Connect your battery
try to flash now & reply..
Click to expand...
Click to collapse
Doesn't work! Cannt get any of key combinations to start phone in any mode... It just stays a blank screen, nothing happens...

[Q] Bricked? LG E612G

So I have a LG E612G from Chilean company Claro.
I have the bootloader unlocked, and I was using Cyagenmod beta for android 4.3, but the phone has a lot of lag and issues so I decided to go back to stock, so I downloaded the KDZ file and KDZ updater beside all the drivers needed, I have tried with several KDZ:
V20G_00
V20C_00
V20A_00
V10E_00
V10D_downgrade
I have tried using the KDZ updater in DIAG or emergency mode (I just haven't been able to get t he phone to download mode and not to emergency mode), but every time I get the same result, the phone reboot, makes the start sound and the LG logo appears on the screen (with an animation on the border of the "face") and thats all, the animation goes in to a loop and nothing happen even after a while.
I dont't know what else to do, I have followed both unbrick guides that appear here and they aren't working.
I have google the issue and everyone has been able to get their phone working again, I have tried with e612g and e610 kdz to see if that make any difference and nothing.
I don't know if this is important but every time that I have used the KDZ I remove the micro SD from the phone
Please I beg you, help me
P.S: I apologyze for my english as is not my native lenguage

CTuna said:
So I have a LG E612G from Chilean company Claro.
I have the bootloader unlocked, and I was using Cyagenmod beta for android 4.3, but the phone has a lot of lag and issues so I decided to go back to stock, so I downloaded the KDZ file and KDZ updater beside all the drivers needed, I have tried with several KDZ:
V20G_00
V20C_00
V20A_00
V10E_00
V10D_downgrade
I have tried using the KDZ updater in DIAG or emergency mode (I just haven't been able to get t he phone to download mode and not to emergency mode), but every time I get the same result, the phone reboot, makes the start sound and the LG logo appears on the screen (with an animation on the border of the "face") and thats all, the animation goes in to a loop and nothing happen even after a while.
I dont't know what else to do, I have followed both unbrick guides that appear here and they aren't working.
I have google the issue and everyone has been able to get their phone working again, I have tried with e612g and e610 kdz to see if that make any difference and nothing.
I don't know if this is important but every time that I have used the KDZ I remove the micro SD from the phone
Please I beg you, help me
P.S: I apologyze for my english as is not my native lenguage
Click to expand...
Click to collapse
First of all friend, as far as I know nothing can be done to unbrick a phone. If it can be fixed, its not a brick.
Can you get into cwm? (Power + Vol up + home and release power after beep on my phone.)

ayushag96 said:
First of all friend, as far as I know nothing can be done to unbrick a phone. If it can be fixed, its not a brick.
Can you get into cwm? (Power + Vol up + home and release power after beep on my phone.)
Click to expand...
Click to collapse
Now, He is able to boot in "recovery mode", But it's not a custom recovery like he used to have. It boots up in "LG service (Recovery mode)".
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Alternative
@CTuna
You can still try a hard reset..
When the phone is switched off, press and hold the Volume down key + Power key with your left hand.
When the LED on the bottom of the phone lights up, release Volume down key + Power keys and press and hold the Home key (for about 2 seconds) at the same time.
The phone will turn on and perform a factory reset immediately.
Do not operate your phone for at least a minute, while the hard reset is carried out.
You will then be able to switch your phone back on.​

Guys, it works, so if you ever came down here (I mean Chile) I will buy you a beer.
It now have android 4.1.2 and everything is working again
Thanks
Sent from my LG-P500h using xda app-developers app

iMiguelAcuna said:
Now, He is able to boot in "recovery mode", But it's not a custom recovery like he used to have. It boots up in "LG service (Recovery mode)".
Click to expand...
Click to collapse
I know it is an old post but how did you get "recovery mode" screen?
I have a LG E612G and I have tried with all button combinations in order to get that screen in my phone but nothing happens..
please help me with the right instructions

Lg E-612g error cyanogenmod 11 v 9.3
hello, when I press airplane mode in the notification bar and then turn off and turn on wifi the phone reboots and displays the following screen

Doowa said:
I know it is an old post but how did you get "recovery mode" screen?
I have a LG E612G and I have tried with all button combinations in order to get that screen in my phone but nothing happens..
please help me with the right instructions
Click to expand...
Click to collapse
with a locked bootloader on stock you can boot into download mode/emergency mode and hard reset
to boot into a custom recovery like cwm you must unlock the bootloader:good:

edgardg said:
hello, when I press airplane mode in the notification bar and then turn off and turn on wifi the phone reboots and displays the following screen
Click to expand...
Click to collapse
Thats a common problem. SKernel solves it. Meanwhile we have to wait to new beta

Root LG T-Mobile LG GPAD X 8.0 V52110c

First check oem unlock in setting>develop> go to fastboot > fastboot oem unlock.
- Download Rom add rooted: https://drive.google.com/file/d/0BwLkiuDnHmY0bTBsOG12VnBOa3c/view?usp=sharing
- LGUP 1.14.3:http://oceanhost.eu/eps4h4pmwphu/LGUP.zip.htm
- Use LGUP load file dz twrp then START.
- Done phone have rooted
Paypal: [email protected]
Thank you donate.[/B]

I will try this in the morning. I'm new to LG, how do you flash stock?
I put in $25 and will send it when I verify it works.
Thanks for the work!

Currently I am at work.
I will test it once I got home.
----- edit -----
Got soft brick on the device.
TWRP seems to work, but it is stuck on LG boot screen (The device can't be checked for corruption)
I have to open the back cover and reconnect the battery.
Since I have stock kdz file, it goes back to normal after flashing with stock kdz

mingkee said:
Currently I am at work.
I will test it once I got home.
----- edit -----
Got soft brick on the device.
TWRP seems to work, but it is stuck on LG boot screen (The device can't be checked for corruption)
I have to open the back cover and reconnect the battery.
Since I have stock kdz file, it goes back to normal after flashing with stock kdz
Click to expand...
Click to collapse
You can open a thread and put some pictures about how to open the back cover and disconnect the battery.
@tungkick, our device name is T-Mobile LG GPAD X 8.0, not 8.3. Hope those gpad 8.3 users weren't confused.

googlephone said:
You can open a thread and put some pictures about how to open the back cover and disconnect the battery.
@tungkick, our device name is T-Mobile LG GPAD X 8.0, not 8.3. Hope those gpad 8.3 users weren't confused.
Click to expand...
Click to collapse
Pry open from USB OTG port, and use a mini screwdriver to remove the battery connector.
Once you turned off this way, press and hold volume up and plug USB to enter download mode.
Run LGUP and install stock kdz file (upgrade).

mingkee said:
Currently I am at work.
I will test it once I got home.
----- edit -----
Got soft brick on the device.
TWRP seems to work, but it is stuck on LG boot screen (The device can't be checked for corruption)
I have to open the back cover and reconnect the battery.
Since I have stock kdz file, it goes back to normal after flashing with stock kdz
Click to expand...
Click to collapse
Do not know if you're having the same boot problem as me. But I did not have to remove battery to get it to reboot. I just hold all 4 buttons down for a good amount of time and device will reboot. Leave USB cord in and release all buttons then vol up to get into download mode.
Re-reading your post the same exact thing happened to me when testing with tungkick on Skype. dz seems to flash just fine but then it will not boot tablet, so no way to adb reboot recovery.

emilyrugburn said:
Do not know if you're having the same boot problem as me. But I did not have to remove battery to get it to reboot. I just hold all 4 buttons down for a good amount of time and device will reboot. Leave USB cord in and release all buttons then vol up to get into download mode.
Re-reading your post the same exact thing happened to me when testing with tungkick on Skype. dz seems to flash just fine but then it will not boot tablet, so no way to adb reboot recovery.
Click to expand...
Click to collapse
It's uneccesary to open the device to reboot it. Once you've flashed TungKicks stuff, you can Hold Volume down and Power to restart the device, then enter recovery with the key combo, then you can shut down or do whatever with the device with TWRP.
-----------------------------------------------------------------------------
So, Using the info on TungKicks' post I've flashed the device, It has TWRP, but does not boot to android. it just hangs on the dm-verity warning.
I had to use the key combo to get to recovery.
Volume Down + Power. Release power when LG logo shows up, continue to hold Volume Down. Re press power after one second.
Recovery has issues too.
-Can't wipe the device.
-nothing gets mounted.
-TWRP claims that there's no OS installed
-Upon further testing, the recovery reports itself as V510 via MTP. No beuno!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

eriklion said:
It's uneccesary to open the device to reboot it. Once you've flashed TungKicks stuff, you can Hold Volume down and Power to restart the device, then enter recovery with the key combo, then you can shut down or do whatever with the device with TWRP.
-----------------------------------------------------------------------------
So, Using the info on TungKicks' post I've flashed the device, It has TWRP, but does not boot to android. it just hangs on the dm-verity warning.
I had to use the key combo to get to recovery.
Volume Down + Power. Release power when LG logo shows up, continue to hold Volume Down. Re press power after one second.
Recovery has issues too.
-Can't wipe the device.
-nothing gets mounted.
-TWRP claims that there's no OS installed
Click to expand...
Click to collapse
I didn't know how to get to recovery with key combo, everything else I knew. As for TWRP... it's a start, but I wonder what needs to be changed for it to work with this device.

emilyrugburn said:
I didn't know how to get to recovery with key combo, everything else I knew. As for TWRP... it's a start, but I wonder what needs to be changed for it to work with this device.
Click to expand...
Click to collapse
I mention the key combo for restarting the device and entering recovery.
Re: TWRP, it's probably the mounts. Not sure.

eriklion said:
I mention the key combo for restarting the device and entering recovery.
Re: TWRP, it's probably the mounts. Not sure.
Click to expand...
Click to collapse
Nice... thanks for the info. Hopefully @tungkick can fix this mount issue.

eriklion said:
-Upon further testing, the recovery reports itself as V510 via MTP. No beuno!
Click to expand...
Click to collapse
What happened here then? tungkick got confused (it is confusing) because of the model names and compile twrp wrongly from it?

I think waitting upload file root done but he network verry low. I need personal contact me i root with twrp this then backup full tot add root

Twrp this verry hard use

First check oem unlock in setting>develop> go to fastboot > fastboot oem unlock.
- Download Rom add rooted: https://drive.google.com/file/d/0BwLkiuDnHmY0bTBsOG12VnBOa3c/view?usp=sharing
- LGUP 1.14.3:http://oceanhost.eu/eps4h4pmwphu/LGUP.zip.htm
- Use LGUP load file dz twrp then START.
- Done phone have rooted

tungkick said:
First check oem unlock in setting>develop> go to fastboot > fastboot oem unlock.
- Download Rom add rooted: https://drive.google.com/file/d/0BwL...ew?usp=sharing
- LGUP 1.14.3:http://oceanhost.eu/eps4h4pmwphu/LGUP.zip.htm
- Use LGUP load file dz twrp then START.
- Done phone have rooted
Click to expand...
Click to collapse
Tot link got cut off. invalid link

emilyrugburn said:
Tot link got cut off. invalid link
Click to expand...
Click to collapse
https://drive.google.com/file/d/0BwLkiuDnHmY0bTBsOG12VnBOa3c/view?usp=sharing
HEHE^^

tungkick said:
https://drive.google.com/file/d/0BwLkiuDnHmY0bTBsOG12VnBOa3c/view?usp=sharing
HEHE^^
Click to expand...
Click to collapse
I will test it after work.
Thanks for your hard work.

tungkick said:
https://drive.google.com/file/d/0BwLkiuDnHmY0bTBsOG12VnBOa3c/view?usp=sharing
HEHE^^
Click to expand...
Click to collapse
Flash success. Rooted :good: :highfive:
For anyone who flashes this dz. Towards the end it will hang at 100%, just let it continue and it will eventually reboot.

emilyrugburn said:
Flash success. Rooted :good: :highfive:
For anyone who flashes this dz. Towards the end it will hang at 100%, just let it continue and it will eventually reboot.
Click to expand...
Click to collapse
Root also works on mine.
No Adapt Client.
Install Adaway now

I'm getting a Boot verification fail message - Cause MISMATCH_SIG_LEN. Everything went 100% in LGUP, not sure what happened. Its just boot looping on startup screen (LG - powered by android screen)

Huawei p9 lite stuck at " your device is booting now "

Hello,
Please help me, my p9 lite is stuck on " your device is booting now ". I can't do anything. The recovery and the bootloader doesn't work at all. My bootloader Is unlocked. Please help me please :crying:. I've got this phone for Christmas and... He's already not working :crying:

NewShield_ said:
Hello,
Please help me, my p9 lite is stuck on " your device is booting now ". I can't do anything. The recovery and the bootloader doesn't work at all. My bootloader Is unlocked. Please help me please :crying:. I've got this phone for Christmas and... He's already not working :crying:
Click to expand...
Click to collapse
Hello,
Please tell us what exactly were you trying to do?
Regards
Vatsal,
Forum Moderator.

Vatsal said:
Hello,
Please tell us what exactly were you trying to do?
Regards
Vatsal,
Forum Moderator.
Click to expand...
Click to collapse
Hello,
Thank you for helping me .
I'm sorry if my English is very bad, but I'm French.
My phone is stuck at " your device is booting now ". Then, he made a bootloop... And he don't start. I've made the b328 update for nougat with EMUI 5.0 ( Beta ). And, I wanted to return to marshmallow. Then, I've flashed the rom via the bootloader ( system.img, cust.img, boot.img, ect... ). And, when I restarted my p9 lite, he was stuck on " your device is booting now ". And that's how I'm stuck, because I can't do anything. I can't go to the recovery. And I can't go to the bootloader. I'm very stuck.
And, again, I'm sorry if my English is very bad.
Thank you !

NewShield_ said:
Hello,
Thank you for helping me .
I'm sorry if my English is very bad, but I'm French.
My phone is stuck at " your device is booting now ". Then, he made a bootloop... And he don't start. I've made the b328 update for nougat with EMUI 5.0 ( Beta ). And, I wanted to return to marshmallow. Then, I've flashed the rom via the bootloader ( system.img, cust.img, boot.img, ect... ). And, when I restarted my p9 lite, he was stuck on " your device is booting now ". And that's how I'm stuck, because I can't do anything. I can't go to the recovery. And I can't go to the bootloader. I'm very stuck.
And, again, I'm sorry if my English is very bad.
Thank you !
Click to expand...
Click to collapse
Hello,
I will move your thread to correct section, the experts there might be able to assist you.
Regards
Vatsal,
Forum Moderator.

the fix
NewShield_ said:
Hello,
Thank you for helping me .
I'm sorry if my English is very bad, but I'm French.
My phone is stuck at " your device is booting now ". Then, he made a bootloop... And he don't start. I've made the b328 update for nougat with EMUI 5.0 ( Beta ). And, I wanted to return to marshmallow. Then, I've flashed the rom via the bootloader ( system.img, cust.img, boot.img, ect... ). And, when I restarted my p9 lite, he was stuck on " your device is booting now ". And that's how I'm stuck, because I can't do anything. I can't go to the recovery. And I can't go to the bootloader. I'm very stuck.
And, again, I'm sorry if my English is very bad.
Thank you !
Click to expand...
Click to collapse
the method to fix this is to create a folder on the root of the sd card called DLOAD then put the stock huawei uppdate.app in the folder then shut down and hold volume up, down and the power button at the same time and it will flash the stock firmware, then shut down and boot recovery then wipe user data, next cache then davlik cache then, reebot and give it time to boot.

hellpp
i heave same problem but i cant shut down same and same. i hold all vol up vol down with and without power but same. YOU DIVACE HAS BEEN UNLOCKED AND CANT BE TRUSTED
TO LEARN MORE VISIT.......SITE
YOUR DEVICE IS BOOTING NOW

mendja said:
i heave same problem but i cant shut down same and same. i hold all vol up vol down with and without power but same. YOU DIVACE HAS BEEN UNLOCKED AND CANT BE TRUSTED
TO LEARN MORE VISIT.......SITE
YOUR DEVICE IS BOOTING NOW
Click to expand...
Click to collapse
Did you try wating till the battery is fully discharged?

xDavi01 said:
Did you try wating till the battery is fully discharged?
Click to expand...
Click to collapse
yes am weathing but when a plug eny of cable come on seame
YOU DIVACE HAS BEEN UNLOCKED AND CANT BE TRUSTED
TO LEARN MORE VISIT.......SITE
YOUR DEVICE IS BOOTING NOW
this is end of my phone

Hmmm.. it looks like it's trying to boot into recovery, but, probably it's a corrupted recovery: when you flash a corrupted recovery and it tries to boot into it, it'll be stuck in "Your phone is booting up etc...". I experienced that about a week ago but to get my phone working again, i just copied b161 in my external sdcard in the folder "dload". Then i inserted the ext sd in my phone and i held Power Button for about 10 seconds and my phone shut down. Then i held Power Button + Vol Up + Vol Down and popped up the update screen. That's how i managed my phone to get it work again, hope this helps you

xDavi01 said:
Hmmm.. it looks like it's trying to boot into recovery, but, probably it's a corrupted recovery: when you flash a corrupted recovery and it tries to boot into it, it'll be stuck in "Your phone is booting up etc...". I experienced that about a week ago but to get my phone working again, i just copied b161 in my external sdcard in the folder "dload". Then i inserted the ext sd in my phone and i held Power Button for about 10 seconds and my phone shut down. Then i held Power Button + Vol Up + Vol Down and popped up the update screen. That's how i managed my phone to get it work again, hope this helps you
Click to expand...
Click to collapse
dont help me that.....same and same
your device......
to learn.....
your device is booting now
I can not get no fastboot or anything else. no matter what ... pushing volume up or down with or without. all I tried no works

mendja said:
dont help me that.....same and same
your device......
to learn.....
your device is booting now
I can not get no fastboot or anything else. no matter what ... pushing volume up or down with or without. all I tried no works
Click to expand...
Click to collapse
That's really unusual... When you're stuck in that screen, there aren't a lot of ways to power off. The ways i know are hold Power Button or wait till the battery is fully discharged. By the way, you said that you tried discharging, but what happened when you connected the charging cable? Did the phone showed the boot logo (huawei, not the animated one) and then the triple choice menu?

xDavi01 said:
That's really unusual... When you're stuck in that screen, there aren't a lot of ways to power off. The ways i know are hold Power Button or wait till the battery is fully discharged. By the way, you said that you tried discharging, but what happened when you connected the charging cable? Did the phone showed the boot logo (huawei, not the animated one) and then the triple choice menu?
Click to expand...
Click to collapse
Now is discharged when i connect pc or charger for a second come huawei logo and come not triple choice but only one.

mendja said:
Now is discharged when i connect pc or charger for a second come huawei logo and come not triple choice but only one.
Click to expand...
Click to collapse
Can you send me a photo of your current phone screen?

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------- Post added at 05:18 PM ---------- Previous post was at 05:15 PM ----------
mendja said:
Click to expand...
Click to collapse
---------- Post added at 05:19 PM ---------- Previous post was at 05:18 PM ----------
https://www.dropbox.com/s/432wwj90djiins2/DSC_0002.JPG?dl=0
https://drive.google.com/file/d/0B9uAuRN28d6PQnlLdUN2RVpZWFk/view?usp=sharing

Try to discharge it again, then right when you connect it to the charger, before the huawei's logo, instantly hold Power Button + Vol Up.

Nothing about pressing buttons does not work. whether it is possible to do something without key volume up Volume Down. because it not only does not help returns the same picture I tried 100 times

mendja said:
Nothing about pressing buttons does not work. whether it is possible to do something without key volume up Volume Down. because it not only does not help returns the same picture I tried 100 times
Click to expand...
Click to collapse
I think that maybe there's an internal problem with the buttons, because if there is an issue with the motherboard , it wouldn't even show you the screen where you're stuck (i'm not sure at all about it because i'm not an expert in theese things). How old is your phone? Maybe there's just some oxide under the buttons.

same thing happens to me phone is a week old - after i connect the charger after the battery drain i can go to software, but no keyboard present and cannot factory data rest. Discharging now again and will try to power up with the button combination.

mendja said:
Nothing about pressing buttons does not work. whether it is possible to do something without key volume up Volume Down. because it not only does not help returns the same picture I tried 100 times
Click to expand...
Click to collapse
Did you ever figure out how to fix this? I have the same problem now.
I tried flashing the latest twrp recovery from here:
https://forum.xda-developers.com/huawei-p9lite/development/twrp-t3588356
After it finished installing (fastboot didn't give me any Errors) my phone rebooted to the same screen you posted.
My phone keeps rebooting to the same screen no matter what button combinations I press. I also can't turn it off. Keeps rebooting. I'm now waiting for it to fully discharge (it was at 100%) and I will try to get it to boot into the three options menu.
I was trying to update my P9lite (currently VNS-L23C605B120) to Nougat VNS-L23C605B364 (latest found with HuaweiFirmwareFinder).

finnpuschmann said:
Did you ever figure out how to fix this? I have the same problem now.
I tried flashing the latest twrp recovery from here:
https://forum.xda-developers.com/huawei-p9lite/development/twrp-t3588356
After it finished installing (fastboot didn't give me any Errors) my phone rebooted to the same screen you posted.
My phone keeps rebooting to the same screen no matter what button combinations I press. I also can't turn it off. Keeps rebooting. I'm now waiting for it to fully discharge (it was at 100%) and I will try to get it to boot into the three options menu.
I was trying to update my P9lite (currently VNS-L23C605B120) to Nougat VNS-L23C605B364 (latest found with HuaweiFirmwareFinder).
Click to expand...
Click to collapse
You have to take the revolution recovery, because the TWRP Is made for Marshmallow, and if you flash a recovery made for Marshmallow in Nougat, the phone will not load correctly the files and will get stuck on this screen.
So you have to flash the Revolution recovery for the P9 Lite and flash it via Fastboot. You can find it here : https://forum.xda-developers.com/hu...ecovery-twrp-3-0-2-android-nougat-03-t3511937. Once flashed via bootloader, boot into this revolution recovery ( It's like TWRP, just different design ). And then, flash the ROM that you want.

Galaxy A20 - BRICKED NO DOWNLOAD MODE

Hi All,
Apologies if this is not posted in the right forum - ADMINS please move if applicable.
Thank you for all the great MODS and Support received over the years, you have supplied me with great reading material and DIY tips.
I have been flashing and modding since the Galaxy S2 and had my fair share of bricked devices , which I always fixed, but this one baffles me as I did not do anything to it, yet!
Little Background
Bought my wife a new Samsung Galaxy A20 (SM-A205F/DS), she dropped it :silly: and screen got broken.
Order new screen and replaced it, before closing I tested device tested and everything was working 100%
Phone worked like it should, then I closed it and now the phone is not booting up.
What have I tried
- Tried the Recovery Mode (Power + Volume Up) - No Go
- Tried to get Download Mode (Power + Volume Up + Volume Down) - No Go
- Tried battery reset (Power + Volume Down) - Phone Starts but gets Black Screen and turns OFF
- Tried battery removal (Remove and Re-connect Battery on Main Board) - No Go
- Tried Data Cable Start - No Go
- Tried ODIN - No Go - Does not detect Phone
- Tried FlashTool - No Go - Does not detect Phone and also does not have MediaTek Chipset
- Tried ADB and Fastboot - Device not detected
Error Code Received
The below only flashes on for 1 sec and ONLY appears when pressing the Power Button - had to record and take photo
Code:
#Reboot Recovery Cause is [BL:Recovery Mode Set by key]#
Support SINGLE-SKU
#Block-Based OTA
Supported API: 3
#MANUAL MODE v1.0.0#
Rebooting....
Picture of ERROR
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If the image is not working, herewith link
Code:
"https://drive.google.com/open?id=1iCmEF2bzDbCKu4Y2T928hijqbJKozxCb"
Guys I really need your help on this, need to make the wife happy - can anyone point me in the direction of how to get the software back onto this device again.
Regards
Your Friend in Need

Hold all 3 buttons
When it responds release power and very quickly plug in to computer

physwizz said:
Hold all 3 buttons
When it responds release power and very quickly plug in to computer
Click to expand...
Click to collapse
Hi physwizz, did try your suggestion and no go - also tried with different combinations, any other suggestions

X85258X said:
Hi physwizz, did try your suggestion and no go - also tried with different combinations, any other suggestions
Click to expand...
Click to collapse
Buy your wife a basketball and throw the phone away

physwizz said:
Buy your wife a basketball and throw the phone away
Click to expand...
Click to collapse
Is there nothing else you can do, no jtag or pin shorting, come on guys it can not be that hard

physwizz said:
Hold all 3 buttons
When it responds release power and very quickly plug in to computer
Click to expand...
Click to collapse
How long should you keep the buttons pressed

X85258X said:
How long should you keep the buttons pressed
Click to expand...
Click to collapse
Until the phone starts to respond

physwizz said:
Until the phone starts to respond
Click to expand...
Click to collapse
It responds after 15 seconds, showing the Samsung A20 Logo Secured by Knox, how long should you keep the Volume Up + Volume Down Buttons

If the screen turns on plug it right into the pc and see if it can be detected by Odin or by "adb devices" and try to recover it

Maybeyou said:
If the screen turns on plug it right into the pc and see if it can be detected by Odin or by "adb devices" and try to recover it
Click to expand...
Click to collapse
Hey, I have tried that already, the screen switches on and stays on for +-20 seconds and then turns off before displaying the Samsung Logo and if you press the Power Button again it displays the Error Code as per my original post and switches off, if you press any other button it does nothing

physwizz said:
Hold all 3 buttons
When it responds release power and very quickly plug in to computer
Click to expand...
Click to collapse
I got it to work with your suggestion but with a twist.
For the device to get into download mode you must have the USB Cable already connected to your phone and pc.
Odin detects device, will flash software later and give feedback

X85258X said:
I got it to work with your suggestion but with a twist.
For the device to get into download mode you must have the USB Cable already connected to your phone and pc.
Odin detects device, will flash software later and give feedback
Click to expand...
Click to collapse
Great work
Yes I plugged it in pretty quick when I did it
Sometimes it doesn't reboot if it's plugged in
---------- Post added at 09:50 PM ---------- Previous post was at 09:23 PM ----------
Try this now that you're in
https://forum.xda-developers.com/galaxy-a20/how-to/android-10-q-guide-a20-t4095589

X85258X said:
I got it to work with your suggestion but with a twist.
For the device to get into download mode you must have the USB Cable already connected to your phone and pc.
Odin detects device, will flash software later and give feedback
Click to expand...
Click to collapse
Downloaded the firmware to the phone, all went 100% no errors.
Phone rebooted, showed the Blue Screen Android Dude (Installing System) for 1 second and switches off.
Tried to post Picture and Video links but I am not allowed Yet
Now we have a new challenge

physwizz said:
Try this now that you're in
https://forum.xda-developers.com/galaxy-a20/how-to/android-10-q-guide-a20-t4095589
Click to expand...
Click to collapse
Ok cool, will give this a bash a little later and give feedback, will see if I can upload video and images to google drive.
Must OEM Unlocker be enable, if so we might have problems

Picture of Screen after successful flash

physwizz said:
Great work
Yes I plugged it in pretty quick when I did it
Sometimes it doesn't reboot if it's plugged in
---------- Post added at 09:50 PM ---------- Previous post was at 09:23 PM ----------
Try this now that you're in
https://forum.xda-developers.com/galaxy-a20/how-to/android-10-q-guide-a20-t4095589
Click to expand...
Click to collapse
Hey, ok I tried all different stock firmwares - from earliest to latest and all result with same error state as per the original post.
Code:
#Reboot Recovery Cause is [BL:Recovery Mode Set by key]#
Support SINGLE-SKU
#Block-Based OTA
Supported API: 3
#MANUAL MODE v1.0.0#
Rebooting....
Is there anything else we can try or is this now just an expensive paperweight

physwizz said:
Great work
Try this now that you're in
https://forum.xda-developers.com/galaxy-a20/how-to/android-10-q-guide-a20-t4095589
Click to expand...
Click to collapse
I have tried, but as suspected OEM Lock is still Active and there is currently no way of disabling it, as I do not have access to the main os.

Im sorry, if you used Odin and unchecked auto reboot, you have to hold power and down for 10 seconds, then immediately hold volume down and power for recovery then boot to system. If installing twrp that is. That screen doesn't change after a flash with auto reboot off. I'd reflash and reboot to recovery from what I'm seeing
Or
If your good with wires you can short pins 4 and 5 using 333k resistor and plug into phone, it'll get you to download mode

Same Exact Problem
literally the same exact problem / symptoms.
It happened to me immediately after an automatic system update
it seems to me that the aftermarket screen somehow lost full compatibility.
i used odin and also tried installing all the available updates and they were successful but issue remained
please let me know if you come up with a solution i will do the same if i find one.

X85258X said:
Hey, I have tried that already, the screen switches on and stays on for +-20 seconds and then turns off before displaying the Samsung Logo and if you press the Power Button again it displays the Error Code as per my original post and switches off, if you press any other button it does nothing
Click to expand...
Click to collapse
I have the same issue right now. Without the error message displayed.
The phone can not boot into download mode. I tried all the things mentioned in this thread.
Same Exact Problem
literally the same exact problem / symptoms.
It happened to me immediately after an automatic system update
it seems to me that the aftermarket screen somehow lost full compatibility.
i used odin and also tried installing all the available updates and they were successful but issue remained
please let me know if you come up with a solution i will do the same if i find one.
Click to expand...
Click to collapse
It seems like it could really a problem with the aftermarket screen. My A20 has a new screen and maybe thats the same probem.
Can anyone help us?