Database Users

[HOW-TO] Flash latest 4.2.2 on GT-i9082

DISCLAIMER: I am not responsible for any damage caused to your device, you solely take responsibility for any damage or bricking.
WARNING: The following firmware should only flashed in GT-I9082 and not any other devices as this might brick them.
1. Download Jelly Bean 4.2.2 I9082XXUBMF2 from https://hotfile.com/dl/233057193/bed43fc/I9082XXUBMF2_I9082OXABMF2_OXA.rar.html
2. Now extract the downloaded file I9082XXUBMF2_I9082OXABMF2_OXA.rar the package included the Odin 3.07 and firmware files.
3. Open Odin3 v3.07.exe
4. Power off Galaxy Grand Duos and boot into download mode (Press and hold Home + Power + Volume down buttons).
5. Now Connect phone and wait until you get a blue sign with port name in Odins ID:COM box.
6. Add files by clicking
PIT - baffin.pit
PDA - CODE_I9082XXUBMF2_871997_REV05_user_mid_noship.tar.md5
PHONE - MODEM_I9082XXUBMF2_REV05.tar.md5
CSC - CSC_OXA_I9082OXABMF2_871997_REV05_user_mid_noship.tar.md5
7. Make sure Re-Partition is ticked.
Galaxy grand duos jelly bean 4.2.2 odin flash
8. Finally Click Start and wait until Odin finish flashing....After complete Phone will restart.
That's it done !
Note:
If you encounter any Force close or Boot Loop
1. Boot into recovery mode (Home+ Power + Volume Up)
2. Choose wipe/data factory reset.
(THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
3. Then choose reboot and you should be good to go!
:good: THERE YOU GO, YOU HAVE THE LATEST FIRMWARE INSTALLED IN YOUR SAMSUNG GALAXY GRAND !!! :good:
HIT LIKE IF THIS HELPED YOU
PS - Contact me for any help regarding this.

I think you should be less missleading if this is a "HOW TO" guide.
1. There is no order on the procedures.
2. You show nothing about flashing and applying CWM, as you mention it in the beginning.
3. It's GT "i"9082, not 19082.
4. I don't think you need to wipe data so often. Flashing a stock firmware through odin kind of overwrite the device. IMO one wipe after the flash is enough.

Hi, a noob here..
I'm still on a stock rom...original firmware...and I've downloaded the latest firmware (I9082XXXAMD6_I9082OLBAMD3_XTC) on the livesamsungupdate site...
Is there any clear steps on how can i update my phone without using KIES or the ODIN thing....whichever is the best...
And is there any infos or pros and cons after the updates of official firmwares?
Thanks in advance....

If the file has a .md5 or .tar it is best to flash with odin
If it is a zip file it is best to flash with CWM or other custom recovery

Suriya357 said:
If the file has a .md5 or .tar it is best to flash with odin
If it is a zip file it is best to flash with CWM or other custom recovery
Click to expand...
Click to collapse
These are the files I have from the downloaded firmware:
1. I9082XXAMD6_I9082OLBAMD3_I9082XXAMD1_HOME.tar.md5
2. SS_DL.dll
it is both tar and md5

polpan said:
These are the files I have from the downloaded firmware:
1. I9082XXAMD6_I9082OLBAMD3_I9082XXAMD1_HOME.tar.md5
2. SS_DL.dll
it is both tar and md5
Click to expand...
Click to collapse
I recommend to take a nandroid backup before proceeding
* Reboot your phone into recovery mode (vol up+home+power)
* Wipe data and cache
* Reboot your phone into download mode (vol down+home+power)
* It will show a warning press vol up to proceed
* Now open odin in your pc and connect phone via usb cable
* If odin recognizes your device th ID:COM port will turn yellow or blue(or any color)
* Now click on PDA and locate your .tar.md5 file
* Make sure only Auto reboot and F. reset time is checked
* Click on start (it will take around 10 - 15 mins)
* Once complete unplug the cable and your device will reboot
DONE YOU HAVE YOUR FIRMWARE FLASHED IN YOUR DEVICE.
if any thing goes wrong restore your backupand contact me for help.

Suriya357 said:
I recommend to take a nandroid backup before proceeding
* Reboot your phone into recovery mode (vol up+home+power)
* Wipe data and cache
* Reboot your phone into download mode (vol down+home+power)
* It will show a warning press vol up to proceed
* Now open odin in your pc and connect phone via usb cable
* If odin recognizes your device th ID:COM port will turn yellow or blue(or any color)
* Now click on PDA and locate your .tar.md5 file
* Make sure only Auto reboot and F. reset time is checked
* Click on start (it will take around 10 - 15 mins)
* Once complete unplug the cable and your device will reboot
DONE YOU HAVE YOUR FIRMWARE FLASHED IN YOUR DEVICE.
if any thing goes wrong restore your backupand contact me for help.
Click to expand...
Click to collapse
Hi, does nandroid backup works on non-rooted phones?
does upgrading to official firmware will all the installed apps, contacts, etc will be intact?

polpan said:
Hi, does nandroid backup works on non-rooted phones?
does upgrading to official firmware will all the installed apps, contacts, etc will be intact?
Click to expand...
Click to collapse
Yes it is possible to make one (if you cant then back up after rooting)
No everything will be deleted since you wiped your data before flashing but you can try titanium backup to backup all your apps and contacts before flashing and restore them after flashing.

Suriya357 said:
Yes it is possible to make one (if you cant then back up after rooting)
No everything will be deleted since you wiped your data before flashing but you can try titanium backup to backup all your apps and contacts before flashing and restore them after flashing.
Click to expand...
Click to collapse
Carbon or Helium I think is for non-rooted phones for backup... maybe it will do...
One more thing.... before I upgrade the firmware do I need to remove the SD card and the SIM cards?

polpan said:
Carbon or Helium I think is for non-rooted phones for backup... maybe it will do...
One more thing.... before I upgrade the firmware do I need to remove the SD card and the SIM cards?
Click to expand...
Click to collapse
No there is no need to do that, you will actually need sd card to save the backup.
HIT THANKS PLEASE

Just wondering, can i root it again if my phone is currently rooted? Just wish to have the latest root firmware.

KGNTSTNY said:
Just wondering, can i root it again if my phone is currently rooted? Just wish to have the latest root firmware.
Click to expand...
Click to collapse
What you mean to say ? Dint got
GT-i9082 _ custom rom
hit thanks if i helped you ...
---------- Post added at 02:40 PM ---------- Previous post was at 02:33 PM ----------
adheeshkurekar said:
What you mean to say ? Dint got
GT-i9082 _ custom rom
hit thanks if i helped you ...
Click to expand...
Click to collapse
If ur rooted and you wan to flash latest frimware you can flash with odin3.04 and then follow same procidure which you followed to root ... to root it again ...
GT-i9082 _ custom rom
hit thanks if i helped you ...

adheeshkurekar said:
What you mean to say ? Dint got
GT-i9082 _ custom rom
hit thanks if i helped you ...
---------- Post added at 02:40 PM ---------- Previous post was at 02:33 PM ----------
If ur rooted and you wan to flash latest frimware you can flash with odin3.04 and then follow same procidure which you followed to root ... to root it again ...
GT-i9082 _ custom rom
hit thanks if i helped you ...
Click to expand...
Click to collapse
That was what i meant. Thanks!!
Another question, is flashing custom ROM like rooting my device? I did mine via Cursed4ever on Youtube and it was pretty easy... So i am wondering if i can do the same with those custom ROMs posted here?

KGNTSTNY said:
That was what i meant. Thanks!!
Another question, is flashing custom ROM like rooting my device? I did mine via Cursed4ever on Youtube and it was pretty easy... So i am wondering if i can do the same with those custom ROMs posted here?
Click to expand...
Click to collapse
All custom roms are pre rooted no need to root it
GT-i9082 _ custom rom
hit thanks if i helped you ...

KGNTSTNY said:
Just wondering, can i root it again if my phone is currently rooted? Just wish to have the latest root firmware.
Click to expand...
Click to collapse
Yes you can root it again.

Screenshots
Hey guys do some one know how to delete a post ?

Any idea what is the difference or any improvement of flashing it to the latest version of the official firmware?

I read this article on how to update to latest firmware: Updating to latest firmware
"Verify that both the device's carrier and bootloader are unlocked before proceeding. Attempting to install the firmware on a locked device may completely damage or brick the device."
What does this means? is it if the device is SIM locked?
My phone is is SIM locked on the SIM1 only but not the bootloader... is there any way to check if this is locked?
Thanks in advance...

polpan said:
I read this article on how to update to latest firmware: Updating to latest firmware
"Verify that both the device's carrier and bootloader are unlocked before proceeding. Attempting to install the firmware on a locked device may completely damage or brick the device."
What does this means? is it if the device is SIM locked?
My phone is is SIM locked on the SIM1 only but not the bootloader... is there any way to check if this is locked?
Thanks in advance...
Click to expand...
Click to collapse
No this firrmware will not harm your GT-I9082 because we have bootloader unlocked ans sim unlocked,
How ever take a nandroid backup before flashing so we can revert back the changes if anything goes wrong.

Just for additional ROM links I've found. All countries ROM include latest and previous version for your Grand Duos.
http://samsung-updates.com/device/?id=GT-I9082

[Q] N900 Rooted With Custom ROM to Lollipop?

i've been reading this thread over in the General discussions:
http://forum.xda-developers.com/galaxy-note-3/general/lollipop-ota-note-3-n900-started-t2973773
i currently have K14-Dr.Ketan custom ROM flashed to my phone:
http://forum.xda-developers.com/showthread.php?t=2519897
and my recovery is TWRP v2.7.1.0
the CSC code is: INU.
at first, i thought i couldn't update to the Lollipop update because its CSC code is XXV/THL
but then i saw a reply somewhere in the midst saying to flash a 4.4.2 version to change my code to the proper one.
i'm not entirely sure what to do. any help would be much appreciated!
(typo edits)

mrhomiec said:
i've been reading this thread over in the General discussions:
http://forum.xda-developers.com/galaxy-note-3/general/lollipop-ota-note-3-n900-started-t2973773
i currently have K14-Dr.Ketan custom ROM flashed to my phone:
http://forum.xda-developers.com/showthread.php?t=2519897
and my recovery is TWRP v2.7.1.0
the CSC code is: INU.
at first, i thought i could update to the Lollipop update because its CSC code is XXV/THL
but then i saw a reply somewhere in the midst saying to flash a 4.4.2 version to change my code to the proper one.
i'm not entirely sure what to do. any help would be much appreciated!
Click to expand...
Click to collapse
It take time to change csc code.
Read this topic and change to XXV.
http://forum.xda-developers.com/showthread.php?t=2342328

so i don't understand a few things in regard to the steps...
1b. You are on stock ROM but is on other's region firmware and is rooted (based on Samsung official firmware). Same, just download your stock latest update firmware from sammobile.com first. Which contains your region's CSC.
Click to expand...
Click to collapse
so since my stock custom ROM is INU-based, i go and download the INU firmware?
2. Ok, now both are on a stock ROM but rooted, check your CSC using the CSC Changer app.
3. If not working, then install ES File Explorer from Playstore or link below (recommended) or other file browser with Root access ability. Open the side menu and select Root Explorer.
Click to expand...
Click to collapse
i only found one app in the Play Store with this name, and it's 0.99 cents, before i buy it, is that the correct one? or if i don't want to buy it, i just continue with step 3?
7. Alright all done, reboot your phone first. Then reset the BIN counter using Triangle Away. (Again, friendly reminder: Do not enter CWM Recovery again as it will increase the BIN counter) Reboot and put your phone in Download mode. Flash the stock ROM you've downloaded though ODIN.
Click to expand...
Click to collapse
so if i go with the ES File Explorer route, i can then go straight into flashing the Lollipop firmware?
also, do i need the app Triangle Away? if i don't care about the BIN counter?
my goal is to be unrooted, on Lollipop, with/without Knox counter tripped.

It doesnt matter INU or whatever region. As long as your device is N900 , Just download NJ3 firmware with XXV region which download link given in that post or download from sammobile.
Secondly, better to do factory reset after u flashed NJ3.
3. No need to buy csc changer. Just install free"phone info" from play store and check ur csc and if not xxv, change ur csc code to xxv with that "phone info" application.
4. You may need to flash NJ3 again or wipe data until u see ur csc is xxv.
5. Follow the instruction about lollipop post.
6. You can skip supersu 2.40 step if u dont want a root.

satslu said:
3. No need to buy csc changer. Just install free"phone info" from play store and check ur csc and if not xxv, change ur csc code to xxv with that "phone info" application.
Click to expand...
Click to collapse
i found 2 apps on the Play Store, which one is it?
Phone Info *Samsung* (this one has more downloads and reviews)
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
Phone Info
https://play.google.com/store/apps/details?id=sysinfo.sysinfo.sysinfo

mrhomiec said:
i found 2 apps on the Play Store, which one is it?
Phone Info *Samsung* (this one has more downloads and reviews)
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
Phone Info
https://play.google.com/store/apps/details?id=sysinfo.sysinfo.sysinfo
Click to expand...
Click to collapse
The upper one.
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo

satslu said:
The upper one.
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
Click to expand...
Click to collapse
thank you! just so i understand correctly, i use this app to change my code, then i can go straight to flashing the 5.0 firmware in Odin?

mrhomiec said:
thank you! just so i understand correctly, i use this app to change my code, then i can go straight to flashing the 5.0 firmware in Odin?
Click to expand...
Click to collapse
You may need to flash NJ3 again or wipe data until u see ur csc is xxv. Follow the instruction about lollipop post and yes u can start lollipop step.

i ended up following the "new" method posted to the original topic. and just in case anyone finds this thread, here are the exact steps i took:
1. Flash TWRP via ODIN
Click to expand...
Click to collapse
i was using Odin 3.09. put your N900 into download mode by powering it off, then holding the Vol Down + Home Button + Power Button.
then within Odin, click on the "AP" button and browse for the "openrecovery-twrp-2.8.1.0-ha3g.img.tar" file, and click the Start button
1.1 Enter TWRP and create Backup. (To safe)
Click to expand...
Click to collapse
boot to custom recovery by having your N900 powered off, then holding the Vol Up + Home Button + Power Button.
perform a nandroid backup, and reboot the phone back into Android
1.2. Copy unziped file at /twrp/4d00279c40989079/2014-12-18--00-18-21 LRX21V.N900XXUEBNL4 to phone /twrp/xxxxxx/2014-12-18--00-18-21 LRX21V.N900XXUEBNL4 where xxxxxx is unique generated for your device
Click to expand...
Click to collapse
now that your phone is backed up, copy the extracted "TWRP-LRX21V.N900XXUEBNL4-samsungviet.vn.zip" to your nandroid backup location
2. Enter TWRP -> Wipe -Swipe to Factory Reset
Click to expand...
Click to collapse
boot back into custom recovery (holding the Vol Up + Home Button + Power Button.)
3. Return TWRP Home -> Restore -> Select "2014-12-18--00-18-21 LRX21V.N900XXUEBNL4"
Click to expand...
Click to collapse
select the extracted folder as your restore state
4. Select everything to restore
Click to expand...
Click to collapse
for me, there was only 3 choices to select, and they were already pre-selected.
5. When finish Restore, return TWRP Home -> Reboot -> Download
Click to expand...
Click to collapse
i had to power off the phone instead of using TWRP to reboot into Download Mode, then do the Vol Down + Home Button + Power Button.
6. Flash Bootloader 5.0 (without Auto Reboot) then pull out battery and re-enter download mode
Click to expand...
Click to collapse
then in Odin, click the "BL" button and browse for the "bootloader-5.0.tar" and click Start
7. Flash stock recovery (with auto reboot)
Click to expand...
Click to collapse
after pulling the battery and putting it back in. boot to Download Mode again (Vol Down + Home Button + Power Button)
in Odin, click on the "AP" button, and browse for the "recovery.tar" and click Start
8. First boot will take 5-10 mins.
Click to expand...
Click to collapse
voila. done.
BLUETOOTH FIX
Flash cwm via odin (dont tick auto reboot)
Take off batre and cable. And take on again.
Press volume up + home + power button and get in recovery mode (cwm).
Flash bluetooth dix from this forum (http://forum.xda-developers.com/gala...-roms-t2938607)
Get in the download mode and flash stock recovery.
reboot and you can use your bluetooth again
Click to expand...
Click to collapse
although i don't understand this step.
it says to flash CWM even though the previous steps have you flash TWRP. (edit: and then the previous steps have you flash stock recovery)
then it says to flash the ZIP file within the custom recovery, boot to download mode, and flash stock recovery?
any help on this part?

Just consider yourself that you are now using android L which is with stoch recovery after u have done all procedure. And yes u facing bluetooth error.
So u have to flash custom recovery( CWM) to flash bluetooth fix zip. May be u can use twrp again to flash bluetoothfix zip.
Sent from my SM-N900 using Tapatalk
---------- Post added at 08:25 AM ---------- Previous post was at 08:24 AM ----------
Once android L is running on ur machine , u can stay with stock recovery or custom recovery.
Sent from my SM-N900 using Tapatalk
---------- Post added at 08:26 AM ---------- Previous post was at 08:25 AM ----------
Once android L is booted to ur machine you can stay with stock or custom recovery.
Sent from my SM-N900 using Tapatalk

satslu said:
Just consider yourself that you are now using android L which is with stoch recovery after u have done all procedure. And yes u facing bluetooth error.
So u have to flash custom recovery( CWM) to flash bluetooth fix zip. May be u can use twrp again to flash bluetoothfix zip.
Click to expand...
Click to collapse
oh yeah, duh. step 7- flash stock recovery.
so i tried to flash TWRP again and i received an error in Odin. i'm thinking it's because i have to root again.
without root, i can't fix the bluetooth then?

I dont think u need root for that.
May be u change ur recovery to CWM than twrp and flash bluetooth fix
Sent from my SM-N900 using Tapatalk

-help- SM-N910f with SM-N910p bootloader

Hello every one
I have bought a Note 4 " SM-N910f " from ebay and when I tried to root it ,I have found that the version of the bootloader belong to another Note 4 (910p).
about device
Model Num: SM-N910F
Android Ver: 5.1.1
Baseband V: N910FXXU1COH4
Build Num: DONGCHAO.A929
CpuZ
model : Samsung Galaxy Note 4 (SM-N910F)
Bootloader :N910PVPU4COG5
Kernel Ver: 3.10.40-5303209(N910PVPU4COG5)
Build Num: DONGCHAO.A929
Odin mode
product name : SM-N910P
current binary: samsung officiel
system status : officiel
reactivation lock off
Knox warranty void : 0x0
the ticket on the back also show the same thing as ''About device''
but when I cheket my IMEI in ""imei.info"" it tell me that my phone is a galaxy s6 edge !!!!
the same IMEI in both (back ticket & software (#*06#))
so what should I do?
because I can't root neither flash a new firmware
Can I relace the bootloader by the one of N910f ?
(I have only try to flash the firmware of N910f ,I did not try n910p firmware's because I am afraid if I succeed I'll finish with locked network phone)
thanks a lot

have same problem. did you succeed to resolve the issue?

I realised that someone has been changing "Sprint Note 4" to look like the international version.
so I decide to install the latest stock rom ( downloaded from sammobile)
Now I am so glad because I didn't get any problem.
I don't Know how but a Note 4(n910c) IMEI was restored not an IMEI of n910p according to "Imei.info"
Hotspot and Network unlocked including LTE

Hi, I am having the same problem as you.
Can you please give me the rom that you used? And which odin version did you use?
thanks.

what version is the modem? when the moden is from n910p too then its a n910p spoofed as n910f. that can be done by changing backcover and mount a sim reader and it works like n910f. so you have a n910p mainboard in it with changed imei with jtag box

niraj2020 said:
Hi, I am having the same problem as you.
Can you please give me the rom that you used? And which odin version did you use?
thanks.
Click to expand...
Click to collapse
Do this only if your bootloader is a N910P**** (Use CPU-Z to check it, you can download it from the market)
You must have a least 60%
You should remove your SIM card
I've used the latest rom from this link.
http://www.sammobile.com/firmwares/download/60440/N910PVPU4COJ6_N910PSPT4COJ6_SPR/
I assume that you've already installed Samsung driver
and that you have the latest version of odin v3.10.7 and that you're familiar on how to use it
but before you proceed you have to :
1- Instal a custom recovery (Twrp)
http://forum.xda-developers.com/not...nt/tool-utility-twrp-2-8-1-0-teamwin-t2915591
2- boot into TWRP
3-in advanced wipe dalvik cache
4-wipe data/factory reset
5-Format /cache
6-Format /system
7-Format /Data
8-go to advanced and reboot to download mode
9-flash the downloaded rom
wait (10-15min) until your device come to world
Now you have a fresh and clean note 4
10-check your IMEI (*#06#) in http://www.imei.info/
11-restrict data and wifi usage for the following app
Sprint ID
Mobile Installer
Sprint Zone
MyScript Resource Manager
12-Update Your System (settings > System Update > Update Now)
Because this is not the latest build You should upgrade to N910PVPS4COK1 (150mo)
to correct some issue with Google Play Store and other things
13- Update you Play Store and Google Services thru the Store
14- shutdown your device when finished
15-insert your SIM and wake up your Note 4
16-you should root it to profit
(remove unwanted sprint apps it's recommended check the forum to find them out -Use Titanium Backup pro #1 )
enjoy and wait for the Marshmallow =)

geiti94 said:
what version is the modem? when the moden is from n910p too then its a n910p spoofed as n910f. that can be done by changing backcover and mount a sim reader and it works like n910f. so you have a n910p mainboard in it with changed imei with jtag box
Click to expand...
Click to collapse
Hi.
So how to I get the phone to work? It is in a bootloop when switched on and I cannot go into recovery mode since the phone restarts itself when I try to do so. However I have access to download mode.
Also how do I check the version of the modem?
---------- Post added at 03:50 PM ---------- Previous post was at 03:48 PM ----------
cam_bob22 said:
Do this only if your bootloader is a N910P**** (Use CPU-Z to check it, you can download it from the market)
You must have a least 60%
You should remove your SIM card
I've used the latest rom from this link.
http://www.sammobile.com/firmwares/download/60440/N910PVPU4COJ6_N910PSPT4COJ6_SPR/
I assume that you've already installed Samsung driver
and that you have the latest version of odin v3.10.7 and that you're familiar on how to use it
but before you proceed you have to :
1- Instal a custom recovery (Twrp)
http://forum.xda-developers.com/not...nt/tool-utility-twrp-2-8-1-0-teamwin-t2915591
2- boot into TWRP
3-in advanced wipe dalvik cache
4-wipe data/factory reset
5-Format /cache
6-Format /system
7-Format /Data
8-go to advanced and reboot to download mode
9-flash the downloaded rom
wait (10-15min) until your device come to world
Now you have a fresh and clean note 4
10-check your IMEI (*#06#) in http://www.imei.info/
11-restrict data and wifi usage for the following app
Sprint ID
Mobile Installer
Sprint Zone
MyScript Resource Manager
12-Update Your System (settings > System Update > Update Now)
Because this is not the latest build You should upgrade to N910PVPS4COK1 (150mo)
to correct some issue with Google Play Store and other things
13- Update you Play Store and Google Services thru the Store
14- shutdown your device when finished
15-insert your SIM and wake up your Note 4
16-you should root it to profit
(remove unwanted sprint apps it's recommended check the forum to find them out -Use Titanium Backup pro #1 )
enjoy and wait for the Marshmallow =)
Click to expand...
Click to collapse
hello, how do I make sure if my bootloader is a N910P? I cannot download CPU-Z on the phone since the phone is in a bootloop and not switching on.
Before I had the problem, it was written SM-N910F in the about device of the phone. In download mode, it is written N910p and at the back of the phone it is written Sm-N915F.

If you can access the download mode, you simply flash the custom recovery and follow the instructions

you can get it working by flashing n910p rom with odin (download it from sammobile) after that i can say you how to get it again full working with a n910f rom so that you dont have anymore any sprint apps on it

cam_bob22 said:
If you can access the download mode, you simply flash the custom recovery and follow the instructions
Click to expand...
Click to collapse
I have followed all the instructions but the phone still keeps on rebooting.

geiti94 said:
you can get it working by flashing n910p rom with odin (download it from sammobile) after that i can say you how to get it again full working with a n910f rom so that you dont have anymore any sprint apps on it
Click to expand...
Click to collapse
I am interested on how to do it ...
I was looking for this method, but I find nothing...
thanks

geiti94 said:
you can get it working by flashing n910p rom with odin (download it from sammobile) after that i can say you how to get it again full working with a n910f rom so that you dont have anymore any sprint apps on it
Click to expand...
Click to collapse
please give me how to change from 910P to 910F , i want a international note 4 rom

cam_bob22 said:
I am interested on how to do it ...
I was looking for this method, but I find nothing...
thanks
Click to expand...
Click to collapse
yassine78 said:
please give me how to change from 910P to 910F , i want a international note 4 rom
Click to expand...
Click to collapse
after flashing sprint odin rom install twrp recovery fot it. after that download any rom for n910f and flash it with twrp and then flash a kernel for n910p and it will boot without sprint apks. so you have now n910f rom an no more sprint things

geiti94 said:
after flashing sprint odin rom install twrp recovery fot it. after that download any rom for n910f and flash it with twrp and then flash a kernel for n910p and it will boot without sprint apks. so you have now n910f rom an no more sprint things
Click to expand...
Click to collapse
thank you for your fast reply, i'll try it
it's possible with official firmwars to change from 910p to 910f ???

geiti94 said:
after flashing sprint odin rom install twrp recovery fot it. after that download any rom for n910f and flash it with twrp and then flash a kernel for n910p and it will boot without sprint apks. so you have now n910f rom an no more sprint things
Click to expand...
Click to collapse
thanks for your reply but
Is it possible to flash an *.Md5 file with TWRP ??
If not ,will you give us more details

no solution for official firmwares???

After flashing TWRP, Can we just install a custom n910p rom?

linkerMed said:
After flashing TWRP, Can we just install a custom n910p rom?
Click to expand...
Click to collapse
yes

cam_bob22 said:
yes
Click to expand...
Click to collapse
Thank you! I'll try it out soon.

I just flashed my n910p with a custom rom and it works so much better now, plus its pre-rooted. Thanks again

Flashing Rom

Hello Everyone please help me about note 4 update to 6.0 and i have some question..
im form india but my note 4 is SM-N910P US or UK.. current version lollipop system update not work error shown because note in region...
please help about custom rom installation...
which custom rom work in SM-N910P??
i falsh custom rom after india sim locked or not?
please help Samsung care does not support to me because mobile is overseas
and main problem are hotspot option not avabel in lollipop..
thanx for support

King Of Ego's Heart said:
Hello Everyone please help me about note 4 update to 6.0 and i have some question..
im form india but my note 4 is SM-N910P US or UK.. current version lollipop system update not work error shown because note in region...
please help about custom rom installation...
which custom rom work in SM-N910P??
i falsh custom rom after india sim locked or not?
please help Samsung care does not support to me because mobile is overseas
and main problem are hotspot option not avabel in lollipop..
thanx for support
Click to expand...
Click to collapse
The n910p is the Sprint model. You can update your firmware with Odin, just use the the sprint tar files.
If your not gonna use Sprint service, your first gonna want to make sure the sim is unlocked. Either with a paid service or some other way. There are threads at the Sprint forum for this! Search and read through them. Like GT tools. I am not very knowledgeable in this matter so ask I one of them threads.
Once you make sure your unlocked, if your using gsm service, you can pretty much flash any snapdragon Rom! All you need is to flash a Sprint kernel and correct data fix with the Rom you want.
Also Before you do anything, make a complete backup with twrp! Also make another one once you get unlocked.
The Rom you decide to install will determine which firmware you need before hand.
Once or if your already sim unlocked, and you pick a Rom out that you'd like to install, I can help.
Are you unlocked? Do you know how to use Odin? How to flash and use twrp?
What firmware are you currently on?

aaron74 said:
The n910p is the Sprint model. You can update your firmware with Odin, just use the the sprint tar files.
If your not gonna use Sprint service, your first gonna want to make sure the sim is unlocked. Either with a paid service or some other way. There are threads at the Sprint forum for this! Search and read through them. Like GT tools. I am not very knowledgeable in this matter so ask I one of them threads.
Once you make sure your unlocked, if your using gsm service, you can pretty much flash any snapdragon Rom! All you need is to flash a Sprint kernel and correct data fix with the Rom you want.
Also Before you do anything, make a complete backup with twrp! Also make another one once you get unlocked.
The Rom you decide to install will determine which firmware you need before hand.
Once or if your already sim unlocked, and you pick a Rom out that you'd like to install, I can help.
Are you unlocked? Do you know how to use Odin? How to flash and use twrp?
What firmware are you currently on?
Click to expand...
Click to collapse
sim are unlocked but i have no idea to odin and twrp flash yes other mobile i used custom rom but note 4 not use

King Of Ego's Heart said:
sim are unlocked but i have no idea to odin and twrp flash yes other mobile i used custom rom but note 4 not use
Click to expand...
Click to collapse
This thread has most of the sprint note 4 stock firmware files and Odin: https://forum.xda-developers.com/note-4-sprint/general/stock-tar-odin-flashable-t3250864
Here are official USB drivers: http://org.downloadcenter.samsung.c...G_USB_Driver_for_Mobile_Phones_v1.5.45.00.exe
Here is official Twrp 3.02: https://dl.twrp.me/trltespr/twrp-3.0.2-0-trltespr.img.tar.html This is installed from Odin!
Uninstall any Samsung software you have on pc for best results.
Download and install USB drivers to pc.
Download and unzip Odin to pc.
Download twrp.
1st thing I recommend is making a full backup.
So let's install twrp!
1. So put phone in download mode. (Turn off then hold power+vol dwn+home) then it'll prompt you to push vol up.
2. Open odin as admin.
3. Plug phone in pc USB. Odin should recognize phone.
4. In Odin. Click options, unclick auto reboot. Only 'F Reset time's should be checked. Now go back to log tab.
5. Click the AP button. And load the twrp file.
6. Click start. Do not touch pc or phone. Let it be. When the log states all threads completed. Wait 1 minute just to be safe. Unplug phone. Pull out battery. Put back in.
7. Boot into recovery. Press and hold (pwr+vol up+home)
You should now have twrp.
Goto backup and backup all partitions. If your not worried about your installed stuff, you don't need to backup 'data'.
Main thing is (boot,system,efs,modem)
Save this backup somewhere safe.
---------- Post added at 12:14 PM ---------- Previous post was at 11:41 AM ----------
King Of Ego's Heart said:
sim are unlocked but i have no idea to odin and twrp flash yes other mobile i used custom rom but note 4 not use
Click to expand...
Click to collapse
Part 2. Info!
If your just looking to install stock Rom. All you need is Odin and the stock tar file. But you select auto reboot in Odin.
You only deselect auto reboot when flashing twrp, because it won't stick.
Also once you upgrade to ok1 there is no downgrading.
If your looking to instal custom roms, you should read what firmware they recommend to have before hand. But most of them should work on most current firmware. It just depends.
In general this is what you'll do.
1. Odin the stock firmware you want. Let it boot.
2. Odin twrp.
3. Once you have twrp, flash any Rom you want for your phone.
4. Use a Sprint kernel (Ram) and data fix for international roms.
Edit. Once you upgrade your firmware, it's a good idea to make another backup of it. Especially the EFS.

verification failed after root s7 edge nougat (CANT ROOT MY PHONE)

Hello I have the S7 edge g935f nougat 7.0 , I flashed the twrp last version, got into twrp, flashed the SuperSU, and then after reboot said verification failed etc.. I flashed a stock rom which has the December security patch probably that's the reason why says that... I tried to flash the rom again, then flash first a dm-verify zip and then SuperSU (tried with magisk too) but nothing changed.. what to do ?

This is for Exynos
1.Turn on Odin3 and connect your phone to PC in Download Mode (hold "Power & Home & Volume -" for a while).
2.Download lastest custom recovery correctly for your model from offical TWRP website then unpack zip to get flashable *.tar file.
3.Put twrp-3.2.1-x-xxxxxx.img.tar file to "AP" tab.
4.In Options tab check only "F. Reset Time". ATTENTION: rest options must be UNCHECKED!!!
5.Press "Start" and wait till finish flashing (you will see "PASS" info as on THAT screenshot when flashing will be finished).
6.Press and hold "Power & Home & Volume -" for a while to reboot your device. Directly while phone rebooting (when display is turned off/black) press and hold "Power & Home & Volume +" till custom TWRP recovery menu shows up.
7.Go to "Wipe" menu, and swipe to right for "Factory Reset".
8.Now you can flash any zip file to your phone, so all custom ROM's & kernels & mods etc and also you can ROOT with lastest Magisk.zip or SuperSU.zip, etc.
Click to expand...
Click to collapse
Point 7 will wipe ALL youre data, but is a necessary step to root your device.
https://forum.xda-developers.com/galaxy-s7/how-to/guide-onelatest-stock-fw-csc-root-t3702963

jbakers said:
This is for equinox
Point 7 will wipe ALL youre data, but is a necessary step to root your device.
https://forum.xda-developers.com/galaxy-s7/how-to/guide-onelatest-stock-fw-csc-root-t3702963
Click to expand...
Click to collapse
What is equinox?

I want to flash the stock rom not a custom one because it's says you can flash any custom rom , after all steps can I flash again the stock rom ?

after i swipe right to factory reset my device says failed to mount '/data' (invaliod argument)
...done
Unable to mount storage
tried to flash the no-verify-opt-encryption zip but nothing changed ..

You need to go into TWRP straight after installing it and do the following:
Click Wipe --> Click right button that says "Format Data".
Type "yes" to continue
If that doesnt help:
How to solve problem with mounting "/data" in TWRP?
1.Flash THAT package via TWRP or go to CF-Auto-Root website, download package for your model and stock firmware on which you are/were and just flash it via Odin3

StonebridgeGr said:
What is equinox?
Click to expand...
Click to collapse
Sorry Exynos, was half asleep...
Its which SOC it uses:
Samsung Exynos 8890 Model[edit]
SM-G935F (International Single Sim)
SM-G935FD (International Dual Sim)
SM-G935W8 (Canada)
SM-G935S (South Korea SK Telecom)
SM-G935K (South Korea KT)
SM-G935L (South Korea LG U+)
Qualcomm Snapdragon 820 Model[edit]
SM-G9350 (China Open Model, Hong Kong)
SM-G935V (USA Verizon Wireless)
SM-G935A (USA AT&T)
SM-G935P (USA Sprint)
SM-G935T (USA T-Mobile US)
SM-G935U (USA Samsung Unlocked)
SM-G935R4 (USA US Cellular)
SC-02H (Japan NTT DoCoMo)
SCV33 (Japan KDDI au)
SM-G935U (USA Unlocked)
https://en.wikipedia.org/wiki/Samsung_Galaxy_S7#Galaxy_S7_Edge

jbakers said:
You need to go into TWRP straight after installing it and do the following:
Click Wipe --> Click right button that says "Format Data".
Type "yes" to continue
If that doesnt help:
How to solve problem with mounting "/data" in TWRP?
1.Flash THAT package via TWRP or go to CF-Auto-Root website, download package for your model and stock firmware on which you are/were and just flash it via Odin3
Click to expand...
Click to collapse
After i flash that file i can go to the twrp again and flash the magisk or supersu??

jbakers said:
You need to go into TWRP straight after installing it and do the following:
Click Wipe --> Click right button that says "Format Data".
Type "yes" to continue
If that doesnt help:
How to solve problem with mounting "/data" in TWRP?
1.Flash THAT package via TWRP or go to CF-Auto-Root website, download package for your model and stock firmware on which you are/were and just flash it via Odin3
Click to expand...
Click to collapse
did that but after reboot the phone bootloop ..... restarted itself while its on samsung logo, i must flash the stock rom again , so nothing changed .. what to do ?

I need someone's help me i want so much to root my phone with magisk tool, also keep in mind the phone is second hand and it had a austria firmware . i dont know if that matters, now the current stock rom is a greek COSMOTE.. before that with the austria firmware i could normally flash the phone i tried only with SuperSU tho .. when i say greek or austria firmware i mean the CSC if i am right

StonebridgeGr said:
I need someone's help me i want so much to root my phone with magisk tool, also keep in mind the phone is second hand and it had a austria firmware . i dont know if that matters, now the current stock rom is a greek COSMOTE.. before that with the austria firmware i could normally flash the phone i tried only with SuperSU tho .. when i say greek or austria firmware i mean the CSC if i am right
Click to expand...
Click to collapse
Dont know where is the problem, are you following steps correctly? Install twrp > wipe all data > flash rom > flash super SU / magisk . Also don't flash carrier firmwares, flash the correct carrier free firmware for your region IF your phone is NOT carrier locked.
Sent from my S7 Edge using XDA Labs

shah22 said:
Dont know where is the problem, are you following steps correctly? Install twrp > wipe all data > flash rom > flash super SU / magisk . Also don't flash carrier firmwares, flash the correct carrier free firmware for your region IF your phone is NOT carrier locked.
Sent from my S7 Edge using XDA Labs
Click to expand...
Click to collapse
i dont want custom rom, only the stock

i cant any files throught twrp i tried multiple version of twrp.. if i try to flash something and then reboot my devices says that thing about encryption .. also i get error about mount /data tried to format data but if i format them then the firmware will be wiped , so i have to flash the firmware from begin ..

StonebridgeGr said:
i cant any files throught twrp i tried multiple version of twrp.. if i try to flash something and then reboot my devices says that thing about encryption .. also i get error about mount /data tried to format data but if i format them then the firmware will be wiped , so i have to flash the firmware from begin ..
Click to expand...
Click to collapse
See this https://forum.xda-developers.com/s7-edge/development/rom-s7-edge-rom-v1-1-t3356699
See the beginner section,
Also see this
https://forum.xda-developers.com/galaxy-s7/how-to/root-official-stock-nougat-7-0-100-t3540765
And this too
https://forum.xda-developers.com/s7-edge/development/samsung-systemless-devbase-encryption-t3517178
You should be doing a mistake somewhere. Good luck
Sent from my S7 Edge using XDA Labs

shah22 said:
See this https://forum.xda-developers.com/s7-edge/development/rom-s7-edge-rom-v1-1-t3356699
See the beginner section,
Also see this
https://forum.xda-developers.com/galaxy-s7/how-to/root-official-stock-nougat-7-0-100-t3540765
And this too
https://forum.xda-developers.com/s7-edge/development/samsung-systemless-devbase-encryption-t3517178
You should be doing a mistake somewhere. Good luck
Click to expand...
Click to collapse
Dude if i format the phone from twrp and then reboot the system says there is no OS....

StonebridgeGr said:
Dude if i format the phone from twrp and then reboot the system says there is no OS....
Click to expand...
Click to collapse
Bro, then you should flash the rom through twrp ! Put rom on sd card and flash. Then flash super su. I advise you to watch video tutorials on the links i provided above.
Sent from my S7 Edge using XDA Labs

shah22 said:
Bro, then you should flash the rom through twrp ! Put rom on sd card and flash. Then flash super su. I advise you to watch video tutorials on the links i provided above.
Click to expand...
Click to collapse
Ahahah you talk me like I don't know about android but you don't get it.. I want the stock ROM of Odin.. not a custom.. but I install the superman ROM you send above.. it helped me so far. Thank you so much

StonebridgeGr said:
Ahahah you talk me like I don't know about android but you don't get it.. I want the stock ROM of Odin.. not a custom.. but I install the superman ROM you send above.. it helped me so far. Thank you so much
Click to expand...
Click to collapse
No, i will never think that anyone has lesser knowledge than mine, i am a newbie myself. But why you wipe all internal memory ? If you want stock then only format data and cache/dalvik. Also use system less root or otherwise you will get dm verity fail error. You can also flash no verity opt encrypt to bypass this error if you don't want to use system less root.
Sent from my S7 Edge using XDA Labs

shah22 said:
No, i will never think that anyone has lesser knowledge than mine, i am a newbie myself. But why you wipe all internal memory ? If you want stock then only format data and cache/dalvik. Also use system less root or otherwise you will get dm verity fail error. You can also flash no verity opt encrypt to bypass this error if you don't want to use system less root.
Click to expand...
Click to collapse
I flashed the superman ROM which is like the stock the UI and it has more features.. but the battery is draining faster than the stock.. maybe a cpu governor can help that ?

StonebridgeGr said:
I flashed the superman ROM which is like the stock the UI and it has more features.. but the battery is draining faster than the stock.. maybe a cpu governor can help that ?
Click to expand...
Click to collapse
Ofcourse, there is a whole lot of tweaking when using custom kernels/roms. But be careful, as these tweakings requires much research as it could also damage the hardware if done the wrong way. My advice still is to go back to everything stock and then root it using twrp and super su. Again, don't wipe all internal storage, only data and dalvik cache. Good luck
Sent from my S7 Edge using XDA Labs