hello master
i am nubie
i got problem in my device
i instaled rom miui 8, and instal exposed for flat bar notificaton app
after restarting the phone, i got a bootloop, and cant enter recovery
i try to instal recovery.img again but in cmd writed "failed (remote : dtb not found)"
how to fix it,
pls help. i not use phone now, so i have not ss
Blank266 said:
hello master
i am nubie
i got problem in my device
i instaled rom miui 8, and instal exposed for flat bar notificaton app
after restarting the phone, i got a bootloop, and cant enter recovery
i try to instal recovery.img again but in cmd writed "failed (remote : dtb not found)"
how to fix it,
pls help. i not use phone now, so i have not ss
Click to expand...
Click to collapse
Try to flash stock recovery using fastboot, that should work. Then flash stock rom.
Now i cant fix it. And use miui9 Rom :good:
Related
Hello,
I have serious problem with my phone. I bought HTC with windows mobile and some time ago I have installed Android from this topic http://forum.xda-developers.com/showthread.php?t=1455555 I chose nand-boot option so windows had been deleted from hard memory. Then 5days ago I decided to do an upgrade of Android. Downloaded new version of Android and tried to install it from old Android, system crashed and I can’t do anything in bootloader know. It's only this message:
nand id: 0x5500bcec maker=0xeo device=0xbc
press VOLUME UP for RECOVERY
press VOLUME DOWN for FASTBOOT
flash_read_image: failed (319 errors)
ERROR: Cannot read recovery_header
flash_read_image: failed (5056 errors)
ERROR: Cannot read kernel image verting to fastboot mode.
ENTERING FASTBOOT MODE
udc_start()
Click to expand...
Click to collapse
When I press Volume Up or Down nothing happens. So I decided back to windows but I have problem with install it. When I try to install original ROMs have this ERROR 294 -> Invalid vendor id. When try to install custom ROM with using SSPL I have other ERROR [262] -> Update error. I tried to installation from SD card but nothing happens in 3 colors bootloader.
Please help me…
http://forum.xda-developers.com/wiki/RUU_Errors#ERROR_.5B294.5D_:_INVALID_VENDOR_ID
are you sure you followed the steps correctly when you tried to install from sd card?(explain what you did and nothing happened)
tzacapaca said:
http://forum.xda-developers.com/wiki/RUU_Errors#ERROR_.5B294.5D_:_INVALID_VENDOR_ID
are you sure you followed the steps correctly when you tried to install from sd card?(explain what you did and nothing happened)
Click to expand...
Click to collapse
Hi I've the same problem, I don't know what to do, is there anyone who has got an hint?
I cannot reinstall the ROM because the damn INVALID VENDOR, I canno use SSPL_RUU.exe as suggested in this forum because it must be run from WM and not from the coloured strips screen..
is there a solution? please!
you should try your original WM ROM, or for android these aren't any problem.. it's because bad installation,
i broke my bootloader too. cant enter recovery or something else. someone an idea? :/
reinstall recovery from windows>usb>htcHDmini
Hay guys, i really hope u can help my.
Yesterday I bought the P8 Lite, i wanted to install android 6, after this failed I tried to get root.
I dont know why, but i went into bootloop.
After flashing everything with Fastboot I went into Rescue Mode.. I installed the StockRecovery (B204 wich i had at the beginning) and now im in bootloop again..
When I try to flash 'boot.img' from the Original B204 i says 'writing 'boot'...
FAILED (remote: flash write failure)'
My bootloader is unlocked.
Hope u guys can help me
With stock recovery try a forced update
http://forum.xda-developers.com/p8lite/general/guide-debranding-converting-single-sim-t3305977
Look at the part 2,maybe this will help you
ItalianWolf said:
With stock recovery try a forced update
Click to expand...
Click to collapse
I tried already :/
Sheldd said:
http://forum.xda-developers.com/p8lite/general/guide-debranding-converting-single-sim-t3305977
Look at the part 2,maybe this will help you
Click to expand...
Click to collapse
I did the whole Part 2, everything run through without an error, but now the phone wont boot nevertheless, it starts to boot and then the screen turns black and nothing happens..
sorry for bad english :/
Hello,
Ok, here is the situation
I have a Zuk Z1 with last COS update 12.1 with locked bootloader, no root etc ... (I didn't touch anything).
Yesterday, it reboot by itself but I got bootloop (starting apps then again lenovo boot image ...)
I try to factory reset by using the recovery metohd, it's start normally (optimizing apps ...) but then reboot and again bootloop ...
So I try to sideload the official COS ROM from Cyanogen Support (cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394.zip), but the sideload stuck at 47% and saying total xfer: 1.00x and the phone go back to recovery but still have boot loop ...
I try to boot in fastboot and use the All In One tool to flash official ROM but didn't work (Its say that the bootloader is lock)
I find without knowing this menu a debugging hardware tool test, and then I run the test, its say SD : Fail and in another I got SD : Fail and no sd fuse in dir
I saw many thread here and on google, and some say that we have to use qfil/qpst method, and find this which seems complete : http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/
But as I don't know if its hardware issue or soft brick ...
Could someone help me to recover my phone to COS or CM by using the right method ?
Thank you !
wackou said:
Hello,
Ok, here is the situation
I have a Zuk Z1 with last COS update 12.1 with locked bootloader, no root etc ... (I didn't touch anything).
Yesterday, it reboot by itself but I got bootloop (starting apps then again lenovo boot image ...)
I try to factory reset by using the recovery metohd, it's start normally (optimizing apps ...) but then reboot and again bootloop ...
So I try to sideload the official COS ROM from Cyanogen Support (cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394.zip), but the sideload stuck at 47% and saying total xfer: 1.00x and the phone go back to recovery but still have boot loop ...
I try to boot in fastboot and use the All In One tool to flash official ROM but didn't work (Its say that the bootloader is lock)
I find without knowing this menu a debugging hardware tool test, and then I run the test, its say SD : Fail and in another I got SD : Fail and no sd fuse in dir
I saw many thread here and on google, and some say that we have to use qfil/qpst method, and find this which seems complete : http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/
But as I don't know if its hardware issue or soft brick ...
Could someone help me to recover my phone to COS or CM by using the right method ?
Thank you !
Click to expand...
Click to collapse
Go with qpst/qfil method to recover your phone
And did you tried changing the USB port or cable while side loading cos ROM .. Cause most of issues are solved by the changing USB port or cable.. So try this.. Or else qfil is the option
shubhambhise said:
Go with qpst/qfil method to recover your phone
And did you tried changing the USB port or cable while side loading cos ROM .. Cause most of issues are solved by the changing USB port or cable.. So try this.. Or else qfil is the option
Click to expand...
Click to collapse
Hello,
I got help on the telegram group, we try many thing, the result is that I can only get ZUI working, if flashing COS via QFIL, I get the same result, if I flash ZUI, unlock bootloader, flash TWRP, wipe everything, then sideload CM13, TWRP say that no os is installed and I get a bootloop at the bootloader ...
ZUI is good, but I get some error regarding notification.
If you have any other idea ?
wackou said:
Hello,
Ok, here is the situation
I have a Zuk Z1 with last COS update 12.1 with locked bootloader, no root etc ... (I didn't touch anything).
Yesterday, it reboot by itself but I got bootloop (starting apps then again lenovo boot image ...)
I try to factory reset by using the recovery metohd, it's start normally (optimizing apps ...) but then reboot and again bootloop ...
So I try to sideload the official COS ROM from Cyanogen Support (cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394.zip), but the sideload stuck at 47% and saying total xfer: 1.00x and the phone go back to recovery but still have boot loop ...
I try to boot in fastboot and use the All In One tool to flash official ROM but didn't work (Its say that the bootloader is lock)
I find without knowing this menu a debugging hardware tool test, and then I run the test, its say SD : Fail and in another I got SD : Fail and no sd fuse in dir
I saw many thread here and on google, and some say that we have to use qfil/qpst method, and find this which seems complete : http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/
But as I don't know if its hardware issue or soft brick ...
Could someone help me to recover my phone to COS or CM by using the right method ?
Thank you !
Click to expand...
Click to collapse
Hope this will help you
Check this out
http://forum.xda-developers.com/zuk-z1/help/helpppp-t3505990
http://forum.xda-developers.com/zuk-z1/general/guide-how-to-unlock-root-install-twrp-t3394037
This will help you
Hello GUYS.. So I was on the latest nougat update and I wanted to try CM13 on my P9 Lite VNS-L31 but someone told me that I need to downgrade to 6.0 before I install CM13 So I downloaded oeminfo and 6.0 rom from update finder.. and first I wiped system, data, cache and dalvik cache..okay so now I have no os installed.. Then I tried to install oeminfo with TWRP.. But it can't mount product/vendor/version (invalid argument) And I was like wtf does this mean? so I flashed stock rom image with fastboot again.. it said it's installed but twrp says no os is installed.. ugh I just tried everything to fix that..I tried to extract vendor.img and product.img and flashed them from fastboot.. But it said command not allowed and still twrp gives me the same errors when i try to wipe data or install system.. I asked people on another site and they told me I should install stock boot and recovery images from twrp and install system with 3 buttons method.. So I did but it said failed.. And when I wanted to flash twrp again the bootloader was locked wtf? so then I tried to unlock it again it asked me if i really wanna unlock it and I choose yes..the phone rebooted and I got this
Error Mode
Attention
Please update system again
(Android Logo)
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed)
now I can't boot into recovery or fastboot it just stays in this screen
I tried to install system with the 3 button method but it just won't boot to anything.. I also tried to connect the cable and boot to fastboot..But it. just shows the huawei logo and then goes back to error mode.. please tell me what I should I do now?
hi, did you solve this issue?
You should've just downloaded the rollback package and stock mm rom. Flash the roll back package and then the mm rom in eRecovery. Btw if you are going for meticulus Cm13 rom then ot has been removed from his website and in the beanstalk rom of meticulus when you call someone or someone calls you then the UI restarts. Thats a major bug
Hi everyone,
My zuk doesnt start and it show me only Blue LED and if I plug in to my PC only in recovery mode can i transfer something.it can go into twrp and when i try to flash stock rom ie PAS7FDF rooted it goes to bootanimation and then reboots and again and again.I tried QFIL for both cyanogen Stock ROm and Zui .Zui does boot up but is heating very badly and no radio services what so ever.Right now its on cyanogen from Qfil and i managed to flash twrp . I tried fastboot commands but getting errors like "command Write Failed(No Error) .I can access also "edl mode" and can flash the stock rom again but it doesnt help what can I do? hope someone can help me. thank you in advance PLS HELP