Hello GUYS.. So I was on the latest nougat update and I wanted to try CM13 on my P9 Lite VNS-L31 but someone told me that I need to downgrade to 6.0 before I install CM13 So I downloaded oeminfo and 6.0 rom from update finder.. and first I wiped system, data, cache and dalvik cache..okay so now I have no os installed.. Then I tried to install oeminfo with TWRP.. But it can't mount product/vendor/version (invalid argument) And I was like wtf does this mean? so I flashed stock rom image with fastboot again.. it said it's installed but twrp says no os is installed.. ugh I just tried everything to fix that..I tried to extract vendor.img and product.img and flashed them from fastboot.. But it said command not allowed and still twrp gives me the same errors when i try to wipe data or install system.. I asked people on another site and they told me I should install stock boot and recovery images from twrp and install system with 3 buttons method.. So I did but it said failed.. And when I wanted to flash twrp again the bootloader was locked wtf? so then I tried to unlock it again it asked me if i really wanna unlock it and I choose yes..the phone rebooted and I got this
Error Mode
Attention
Please update system again
(Android Logo)
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed)
now I can't boot into recovery or fastboot it just stays in this screen
I tried to install system with the 3 button method but it just won't boot to anything.. I also tried to connect the cable and boot to fastboot..But it. just shows the huawei logo and then goes back to error mode.. please tell me what I should I do now?
hi, did you solve this issue?
You should've just downloaded the rollback package and stock mm rom. Flash the roll back package and then the mm rom in eRecovery. Btw if you are going for meticulus Cm13 rom then ot has been removed from his website and in the beanstalk rom of meticulus when you call someone or someone calls you then the UI restarts. Thats a major bug
Related
Hello everyone, I have a huawei p8 vodafone it branded.
I decided to root it, unblocked the bootloader and everything was good so far...
I tried to flash a custom recovery but failed for some reason and I decided to stick with stock recovery.
Now I installed an app as system app and my phone got bricked. my fault..
At first It went trough a bootloop and I was not able to access the huawei recovery or the fastboot, after a while it started to boot into a error message where it was saying that it was impossible to read user data partition, and give me some choices like backup, update to the latest version, or data factory.. I choose data factory twice but it went trough a bootloop again only to give me back to the same page after a while.
I can access huawei erecovery but it gives me getting info package failed when it says that I have to update it with wifi.
I can access fastboot mode and it says me that the phone is unlocked.
I really don't know what to do as I'm not expert, I tried to read various topics but never saw anyone with this message where it was saying impossible to read user data partition..
I had emui 3.1 5.1.1 with vodafone it brand... In case I have to flash it which firmware I should look for? Or is there a way to get my phone alive again without flashing?
http://forum.xda-developers.com/huawei-p8/how-to/guide-how-to-unbrick-huawei-p8-failed-t3260704
silvano2 said:
http://forum.xda-developers.com/huawei-p8/how-to/guide-how-to-unbrick-huawei-p8-failed-t3260704
Click to expand...
Click to collapse
Hey thank you silvano, can you tell me which firmware I need to flash it? Is it okay if I use a b170 even if I had the 5.1.1 emui 3.1 version?
Nothing, I can't seem to make it work, I've flashed the boot.img recovery.img system.img and cust.img successfully(b170) but still stuck in bootloop, I can enter bootloader mode, and recovery.. but when I enter recovery it says me that I need to update it and I can't update it because it says me that getting info package failed... tried with different wifis, same result..... The excatly same thing happens with the b132 stock rom too and I cant factory reset or even wipe cache if I dont make this update first as is the only option avaible on huawei eRecovery.
As last attemp I tried to force an upgrade with putting UPDATE.APP inside the sdcard and press vol up vol down and power for booting but this combination of buttons doesnt work...
I'm hopeless, I really don't know what to do... any help would be much appreciated
So where do I start ... I have a VNS-L31 that was running on C185B130, I flashed meticulus's CM13 after making a full dump and a TWRP backup but since it couldn't handle dual sim properly I decided to roll back to stock, the first issue was that data couldn't be mounted (some encryption problem ... I can't quite remember) but somehow the phone booted successfully to stock, I tried to relock the bootloader so I can flash a clean stock using dload but I got 'FAILED (remote: root type is risk)' ... tried to flash with dload anyway but it didn't work because it was a c432 update.app file, then I flashed C432OemInfo-DUALSIM-P9LITE (using recovery terminal "dd" since I had no root ... maybe I shouldn't have ??) anyway the dload worked fine but after reboot => black screen ! I flashed C432B160 and B161 but still the same, no fastboot only stock recovery and nothing, wipe data/factory reset and wipe cache work fine but nothing is changing ! Your help would be much appreciated ! Thanks in advance
edit : I managed to re-unlock the bootloader, flashed twrp but still getting the same error while mounting data : 'failed to mount '/data' (mounted without encryption...)
Hello,
I have a problem that I can flash TWRP wich works fine. I can go to fastboot. But however I am not able to install any ROMs. Tried Lineage 14.1 and Stock rom.
I tried to flash stock recovery and tried to flash it back by "dload" method - error "Package firmware is not compatible" and when I tried to flash Lineage 14.1, everything seemed fine until boot logo where I was stuck for half an hour before I gave up. Also I am not sure but I think I havent managed to root my phone - tested with "adb shell su" wich gives error messages.'
Even tried hisuite recovery but it said that my phone is not supported.
Tried erecovery wich said "Getting package info failed"
I also can enter stock recovery
Im also getting
Failed to mount /vendor (invalid argument) in olddroid TWRP
and when trying to flash system I get FAILED (remote: sparse flash write failure)
So basically only thing I can do is be in TWRP without root, fastboot and stock recovery.
I have european VNS-21. Used to have stock nougat with EMUI 5.0
Any ideas how to get back any kind of rom?
Edited original post instead of posting new replies. Sorry. Dont know how to delete.
Hello,
I have an issue with my brand new G6.
It is in a loop "Your device is corrupt it cannot be trusted and will not boot" , no more recovery available.
What i did:
I unlocked the bootloader and flashed Magisk via TWRP the device displayed that the partition was corrupt and need to be erased.
After that the device was in a loop to twrp, whatever the wipe or ... no system boot.
I read that i had to format the data partition so i adapted a what i found here to my available partitions
https://forum.xda-developers.com/tmobile-lg-g3/general/fix-recovery-loop-twrp-computer-t2873386
the device is now in a constant loop.
Does someone can help me please ?
is there any way to recover it ? download mode ? how ?
Update : I succeed to boot into download mode but LGUP gives me an error while trying to flash
error 0x2000 ... ... cefs::initialize()
docizoc said:
Hello,
I have an issue with my brand new G6.
It is in a loop "Your device is corrupt it cannot be trusted and will not boot" , no more recovery available.
What i did:
I unlocked the bootloader and flashed Magisk via TWRP the device displayed that the partition was corrupt and need to be erased.
After that the device was in a loop to twrp, whatever the wipe or ... no system boot.
I read that i had to format the data partition so i adapted a what i found here to my available partitions
https://forum.xda-developers.com/tmobile-lg-g3/general/fix-recovery-loop-twrp-computer-t2873386
the device is now in a constant loop.
Does someone can help me please ?
is there any way to recover it ? download mode ? how ?
Update : I succeed to boot into download mode but LGUP gives me an error while trying to flash
error 0x2000 ... ... cefs::initialize()
Click to expand...
Click to collapse
Can you boot to TWRP?
Did you make a backup and have access to it? Especially the EFS partition? If you do, restore the EFS partition.
If you can boot to TWRP, try the following:
- wipe everything (the option where you have to type 'yes').
- download lineageOS and flash it. If this is working fine, install whatever ROM you want to install.
no access to twrp anymore , no backup , only access to download mode now
is there a way to flash back twrp or stock recovery from download mode ? boot into fastboot ?
(i know... i have no excuses , but made that so many times without issues ...)
thank you in advance
Maybe you should go in download mode and flash stock Rom with LGUP.
LGUP gives me an error while trying to flash the rom error 0x2000 ... ... cefs::initialize()
Can you flash twrp through lgup or fastboot?
For those that could be in the same situation i finally succeed to flash with LGUP last version but without the 8894DLL
the error was probably coming from the dll.
Cheers and thanks all for the answers
docizoc said:
LGUP gives me an error while trying to flash the rom error 0x2000 ... ... cefs::initialize()
Click to expand...
Click to collapse
It's probably a problem with the DLL, try to extract it from the kdz and input it in Lgup folder (I don't remember where and I'm not home, check the main thread for that) and after that retry flashing
EDIT : well you were faster than my phone glad it worked for you.
hello, yesterday i intalled Oreo on my p10 lite (4gb variant wsa-lx1a) with hwota, everything went fine, after installing a bad file (idk how this happened) my phone bricked..can someone help me?
i can Access fastboot and recovery ...i tried to install it again but it crashes all the time...someone got a solution?
(it Always jumps to "error mode" if i try to boot)
Are you oreo, or try install oreo
If you not running oreo, only try install, then check https://forum.xda-developers.com/showpost.php?p=76235187&postcount=5
I try install oreo and only TWRP install with HWOTA and then hang. Till the end system files was missing (my fault swipe all system files with twrp).
I fixed it with my link. If you change file system maybe oreo files fix it with same method but not sure.
If bootloader is open, it display first warning, but tell reason.
oreo
i was on Oreo, then i installed magisk it worked….after rebooting phone again it bricked
and now it says :"FAILED (remote: Command not allowed)" if i try to install an recovery again (it reinstalls twrp everytime) man i am so ****ed up
if someone got discord can you help me?
ShadowShaco
#9467