Related
hello,
so i was installing cm13 while installing i wiped entire partition(data,including system)
now i can only boot into recovery , i installed cm13, cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394 , after installing if i reboot it will again go to reovery only wont boot into phone..
please help
thank you
ancilary said:
i installed cm13, cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394 , after installing ..
Click to expand...
Click to collapse
That's doesn't make sense, can you explain what it means? Which recovery, which rom was installed and was working? You wipes system and data, ok. What did you do then?
strongst said:
That's doesn't make sense, can you explain what it means? Which recovery, which rom was installed and was working? You wipes system and data, ok. What did you do then?
Click to expand...
Click to collapse
hi , thanks for reply
i was using nought rom 7.0 & TEAMWIN recovery
i performed wipe ( data , cache , system , internal storage)
then installed cm13
it booted only to recovery , after that i tried flashing different rom , no use everytime it goes only to recovery..
What's with your other request? http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921
You need cm13 or stock rom? It's annoying to open several threads..
strongst said:
What's with your other request? http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921
You need cm13 or stock rom? It's annoying to open several threads..
Click to expand...
Click to collapse
that was different but i tried this and now im stuck here
ancilary said:
that was different but i tried this and now im stuck here
Click to expand...
Click to collapse
And what you need is a running cm13 now?
strongst said:
And what you need is a running cm13 now?
Click to expand...
Click to collapse
ya running cm or any other rom is fine..
ancilary said:
ya running cm or any other rom is fine..
Click to expand...
Click to collapse
seems you don't know what you need cm isn't the same as cos, the difference is huge.
For cos12.1 stock rom you can get it here http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921/post70007487
Flash it with all in one tool, it's the easiest way.
Cm13 you can flash it though twrp.
strongst said:
seems you don't know what you need cm isn't the same as cos, the difference is huge.
For cos12.1 stock rom you can get it here http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921/post70007487
Flash it with all in one tool, it's the easiest way.
Cm13 you can flash it though twrp.
Click to expand...
Click to collapse
i flashed cm-12.1-YOG4PAS3AJ-ham-signed.zip with twrp still i get booted to recovery only
ancilary said:
i flashed cm-12.1-YOG4PAS3AJ-ham-signed.zip with twrp still i get booted to recovery only
Click to expand...
Click to collapse
You didn't understand or read my post... You need to flash stock firmware with fastboot. I didn't wrote flash it with twrp.
Use the all in one tool. It's called so, because you can do all with it. Like downloading stock rom and flash it :good:
strongst said:
You didn't understand or read my post... You need to flash stock firmware with fastboot. I didn't wrote flash it with twrp.
Use the all in one tool. It's called so, because you can do all with it. Like downloading stock rom and flash it :good:
Click to expand...
Click to collapse
i tried flashing stock recovery using All in one tool but now its not booting to recovery only
ancilary said:
i tried flashing stock recovery using All in one tool but now its not booting to recovery only
Click to expand...
Click to collapse
Sorry mate, why you do that? It said to flash stock rom with all in one tool, not stock recovery
strongst said:
Sorry mate, why you do that? It said to flash stock rom with all in one tool, not stock recovery
Click to expand...
Click to collapse
i read it as recovery my bad...
now i cannot boot into recovery/fastboot.
powers on rarely too just shows zuk logo and goes off
ancilary said:
i read it as recovery my bad...
now i cannot boot into recovery/fastboot.
powers on rarely too just shows zuk logo and goes off
Click to expand...
Click to collapse
Use all in one tool to boot into bootloader. Read carefully or your next step is qfil method
Here's a good guide in case you're don't get it through aoi tool: http://forum.xda-developers.com/zuk-z1/general/qpst-method-how-to-unbrick-to-stock-t3506833
But better to check again if you can flash stock cos rom with tool
strongst said:
Use all in one tool to boot into bootloader. Read carefully or your next step is qfil method
Here's a good guide in case you're don't get it through aoi tool: http://forum.xda-developers.com/zuk-z1/general/qpst-method-how-to-unbrick-to-stock-t3506833
But better to check again if you can flash stock cos rom with tool
Click to expand...
Click to collapse
Nothing is happening in phone , no respone for any button press . its wont turn on also now
ancilary said:
Nothing is happening in phone , no respone for any button press . its wont turn on also now
Click to expand...
Click to collapse
Can you charge it?
I have OEM unlocked, TWRP flashed, and yeah.
Trying to flash Resurrection Remix and once it's done and I reboot, I get a yellow screen with a couple lines and it gets much worse.
http: // i. imgur . com/ IZ9o3eX .jpg
Which Android version are you using?
Ragazzza said:
Which Android version are you using?
Click to expand...
Click to collapse
6.0.1.
That is the reason, you need to be on 5.1 Lollipop to flash that ROM
All you can do now is flash stock ROM, and start all over
Ragazzza said:
That is the reason, you need to be on 5.1 Lollipop to flash that ROM
All you can do now is flash stock ROM, and start all over
Click to expand...
Click to collapse
AH, so, can I downgrade to 5.1, then flash it?
iiCarelessness said:
AH, so, can I downgrade to 5.1, then flash it?
Click to expand...
Click to collapse
Sure thing fam, you can, download ODIN, and go to sammobile.com and choose 5.1 Lollipop for your country, and flash it. Root you phone after that and install twrp then flash the RR ROM, it will work, good luck
And next time, read the thread better before flashing ROM, next time it could be worst.
Ragazzza said:
Sure thing fam, you can, download ODIN, and go to sammobile.com and choose 5.1 Lollipop for your country, and flash it. Root you phone after that and install twrp then flash the RR ROM, it will work, good luck
And next time, read the thread better before flashing ROM, next time it could be worst.
Click to expand...
Click to collapse
Thank you so much, I appreciate it.
I just skimmed over aha.
iiCarelessness said:
Thank you so much, I appreciate it.
I just skimmed over aha.
Click to expand...
Click to collapse
np bro, report back results so i can know you suceeded
Ragazzza said:
np bro, report back results so i can know you suceeded
Click to expand...
Click to collapse
"Unfortunately, SystemUI has stopped."
I can boot the phone, just can't do anything with it.
Can't use 5.1.1 on my J500FN at all, which is disappointing.
The ROM just hangs on the boot logo, even after I've cleaned system, cache, and data.
iiCarelessness said:
Can't use 5.1.1 on my J500FN at all, which is disappointing.
The ROM just hangs on the boot logo, even after I've cleaned system, cache, and data.
Click to expand...
Click to collapse
1) Go to recovery and wipe /system , /data , /cache and dalvik-cache
2) Power off the phone (from recovery).
3) Boot in Download mode and flash the Lollipop 5.1.1 firmware you want.
3) Wait until phone boots succesfully. Then you can flash TWRP for Lollipop 5.1.1: https://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j5-t3468844 .
Always do the step 1) before upgrading / downgrading Android version, but also when reflashing stock rom with same Android version.
#Henkate said:
1) Go to recovery and wipe /system , /data , /cache and dalvik-cache
2) Power off the phone (from recovery).
3) Boot in Download mode and flash the Lollipop 5.1.1 firmware you want.
3) Wait until phone boots succesfully. Then you can flash TWRP for Lollipop 5.1.1: https://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j5-t3468844 .
Always do the step 1) before upgrading / downgrading Android version, but also when reflashing stock rom with same Android version.
Click to expand...
Click to collapse
This worked, but I'm having issues with /system not being found while flashing RR 6.0.1.
iiCarelessness said:
This worked, but I'm having issues with /system not being found while flashing RR 6.0.1.
Click to expand...
Click to collapse
Try to mount /system manually before flashing it.
#Henkate said:
Try to mount /system manually before flashing it.
Click to expand...
Click to collapse
I got it fixed, I wasn't on the right version of TWRP.
Good night, I wanted to return from nougat to MM flashing for fastboot but when flashing the cust it appears "failed (remote partition error)" and when flashing the system it appears "failed (remote: sparse flash write failure)", someone who can help me to Flash again MM
just search, there's a guide
-edit- link: https://forum.xda-developers.com/hu...t/android-7-emui-5-0-vns-l31-l21-l23-t3513816
mjz2cool said:
just search, there's a guide
-edit- link: https://forum.xda-developers.com/hu...t/android-7-emui-5-0-vns-l31-l21-l23-t3513816
Click to expand...
Click to collapse
The problem is that I run out of operating system
Arn2305 said:
The problem is that I run out of operating system
Click to expand...
Click to collapse
what do you mean by running out of operating system?
mjz2cool said:
what do you mean by running out of operating system?
Click to expand...
Click to collapse
When I flash it I run out of system OS, just enter the recovery twrp revolution, it's practically bricketed.
Try to update the MM by three buttons but it seems as if it does not flash your recovery
Arn2305 said:
When I flash it I run out of system OS, just enter the recovery twrp revolution, it's practically bricketed.
Try to update the MM by three buttons but it seems as if it does not flash your recovery
Click to expand...
Click to collapse
you can't flash oeminfo in revolution twrp and then flash update.app with 3 buttons?
mjz2cool said:
you can't flash oeminfo in revolution twrp and then flash update.app with 3 buttons?
Click to expand...
Click to collapse
It appears that you can not flash the oeminfo because there is no system.
What previously was flashear MM recovery and could be installed the rom by three buttons, but now it appears that flashea the MM recovery but when I try to enter the cell appears as if it did not have recovery
Arn2305 said:
It appears that you can not flash the oeminfo because there is no system.
What previously was flashear MM recovery and could be installed the rom by three buttons, but now it appears that flashea the MM recovery but when I try to enter the cell appears as if it did not have recovery
Click to expand...
Click to collapse
just to be clear, what recovery have you got installed? you need revolution recovery
mjz2cool said:
just to be clear, what recovery have you got installed? you need revolution recovery
Click to expand...
Click to collapse
I only have recovery nougat revolution installed
Arn2305 said:
Yes, because I think I can install a backup by revolution since I can enter your recovery
Click to expand...
Click to collapse
and flashing the correct oeminfo doesn't work?
mjz2cool said:
and flashing the correct oeminfo doesn't work?
Click to expand...
Click to collapse
Correct does not flashea for not having system
mjz2cool said:
and flashing the correct oeminfo doesn't work?
Click to expand...
Click to collapse
Correct does not flashea for not having system
Arn2305 said:
Correct does not flashea for not having system
Click to expand...
Click to collapse
there are people with the same problem and got it solved, try to find those threads
mjz2cool said:
and flashing the correct oeminfo doesn't work?
Click to expand...
Click to collapse
I'm looking for but can not find a solution
Arn2305 said:
I'm looking for but can not find a solution
Click to expand...
Click to collapse
i can't give you a link, but it's there
mjz2cool said:
i can't give you a link, but it's there
Click to expand...
Click to collapse
thanks
So this week i hadn't time enough to install the august update since my phone is rooted so i decided to do it now. What i did before trying to download the update :
1.Deleted all magisk modules that i had then rebooted
2.Unistalled magisk using restore image then rebooted
3.Went to sys update downloaded and it says installation failed
What do to? I'm not rooted now and i don't have twrp installed.
PS. don't want to install it via fastboot/miflash
Follow this guide in future. https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
To fix your problem now, find a stock boot image for your update version you are currently on and flash it.
emiljano539 said:
PS. don't want to install it via fastboot/miflash
Click to expand...
Click to collapse
If you don't want to use Miflash (Why ?) you can boot temporary TWRP and flash .zip here:
https://forum.xda-developers.com/showpost.php?p=77353883&postcount=542
sipollo said:
If you don't want to use Miflash (Why ?) you can boot temporary TWRP and flash .zip here:
https://forum.xda-developers.com/showpost.php?p=77353883&postcount=542
Click to expand...
Click to collapse
Do i lose my data if i flash this via twrp?
Idk i don't really trust miflash
emiljano539 said:
Do i lose my data if i flash this via twrp?
Idk i don't really trust miflash
Click to expand...
Click to collapse
You won't lose your data.
ludditefornow said:
Follow this guide in future. https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
To fix your problem now, find a stock boot image for your update version you are currently on and flash it.
Click to expand...
Click to collapse
flashed the stock boot image tried to install it but again it shows that error , i guess the only thing i can do is to flash it manually via fastboot/miflash
sipollo said:
You won't lose your data.
Click to expand...
Click to collapse
Okay thanks, do i have to remove the magisk and flash the stock boot.img or it doesn't matter?
emiljano539 said:
Okay thanks, do i have to remove the magisk and flash the stock boot.img or it doesn't matter?
Click to expand...
Click to collapse
It doesn't matter. You'll have to reinstall Magisk (if you want to).
sipollo said:
It doesn't matter. You'll have to reinstall Magisk (if you want to).
Click to expand...
Click to collapse
which one should i install from them because there are 2 tissot-T files ( for twrp)
"tissot-T-OPM1.171019.026.8.8.23.zip" or "tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip" ?
emiljano539 said:
which one should i install from them because there are 2 tissot-T files ( for twrp)
"tissot-T-OPM1.171019.026.8.8.23.zip" or "tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip" ?
Click to expand...
Click to collapse
tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip
The other file is the latest beta.
sipollo said:
tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip
The other file is the latest beta.
Click to expand...
Click to collapse
I installed the zip from twrp and now after reboot i am stucked in bootloop now i can't even boot into twrp. What to do?
After i flashed it in the end says:
Failed to mount /system Invalid argument
Which TWRP did you use?
sipollo said:
Which TWRP did you use?
Click to expand...
Click to collapse
the official one. what version should i use?
its funny now that i flashed the stock rom via mi flash tool and now again the installation shows error..
ludditefornow said:
Follow this guide in future. https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
To fix your problem now, find a stock boot image for your update version you are currently on and flash it.
Click to expand...
Click to collapse
I'm facing same issue and I was following the guide.
Same here, can't install set Ota, even after remove magisk.
Other thing, cell won't show screen to put pin to boot, previous pin of sim so I think encryption is disable!? Any idea?
Device - SM-A205FN.
Firmware - A205FNXXSACVB1.
Custom ROM - AospExtended-v9.0-a20-UNOFFICIAL-20220225-2212.
TWRP version - 3.6.1_9-0 [official].
I can’t install this ROM in any way, because when flashing into TWRP, error 1 pops up. I tried to clear various partitions and also deleted the first two lines of the updater-script file.
ANFOR7 said:
Device - SM-A205FN.
Firmware - A205FNXXSACVB1.
Custom ROM - AospExtended-v9.0-a20-UNOFFICIAL-20220225-2212.
TWRP version - 3.6.1_9-0 [official].
I can’t install this ROM in any way, because when flashing into TWRP, error 1 pops up. I tried to clear various partitions and also deleted the first two lines of the updater-script file.
Click to expand...
Click to collapse
Is that latest stock already?
Used "format data" as well?
Changing file system to and fro helped me once when formatting didn't help.
bmwdroid said:
Is that latest stock already?
Used "format data" as well?
Changing file system to and fro helped me once when formatting didn't help.
Click to expand...
Click to collapse
Did you change the file system of the system and did it help you avoid error 1?
I use the latest official firmware and the latest version of the official TWRP and also format the data before installing a custom ROM.
ANFOR7 said:
Did you change the file system of the system and did it help you avoid error 1?
Click to expand...
Click to collapse
Yes. To f2fs and back to ext4.
ANFOR7 said:
I use the latest official firmware and the latest version of the official TWRP and also format the data before installing a custom ROM.
Click to expand...
Click to collapse
bmwdroid said:
Yes. To f2fs and back to ext4.
Click to expand...
Click to collapse
Did you reboot?
ANFOR7 said:
Did you reboot?
Click to expand...
Click to collapse
Yes to TWRP
bmwdroid said:
Yes to TWRP
Click to expand...
Click to collapse
Did not help(
ANFOR7 said:
Did not help(
Click to expand...
Click to collapse
Sorry to hear that.
Last thing I would try is flashing latest stock ROM and start from scratch.
bmwdroid said:
Sorry to hear that.
Last thing I would try is flashing latest stock ROM and start from scratch.
Click to expand...
Click to collapse
This is what I do before every attempt to install a custom ROM.
bmwdroid said:
Sorry to hear that.
Last thing I would try is flashing latest stock ROM and start from scratch.
Click to expand...
Click to collapse
Should I try to lock and then unlock the bootloader back? I heard it clears partitions completely. By the way, in the TWRP tar-archive, not only custom recovery.img, but also custom vbmeta.img to bypass protection. Could this be causing error 1?
ANFOR7 said:
Should I try to lock and then unlock the bootloader back?
Click to expand...
Click to collapse
can't give you any advice here. I'd search other threads before to learn more what happens then.
ANFOR7 said:
I heard it clears partitions completely.
Click to expand...
Click to collapse
afaik it's only doing a factory reset.
ANFOR7 said:
By the way, in the TWRP tar-archive, not only custom recovery.img, but also custom vbmeta.img to bypass protection. Could this be causing error 1?
Click to expand...
Click to collapse
Probably but I'm not sure
Edit: just had a look inside the official twrp-3.6.1_9-0-a20.img.tar and I see only recovery.img
Where did you get the TWRP you're using from.
bmwdroid said:
just had a look inside the official twrp-3.6.1_9-0-a20.img.tar and I see only recovery.img
Where did you get the TWRP you're using from.
Click to expand...
Click to collapse
Someone on another forum gave me an archive with recovery.img, boot.img and vbmeta.img. I extracted only vbmeta.img from there and put it in the archive with the official twrp.
Link to the file: https://ru.files.fm/f/wdzcpqbjd
ANFOR7 said:
Someone on another forum gave me an archive with recovery.img, boot.img and vbmeta.img. I extracted only vbmeta.img from there and put it in the archive with the official twrp.
Link to the file: https://ru.files.fm/f/wdzcpqbjd
Click to expand...
Click to collapse
I c
bmwdroid said:
I c
Click to expand...
Click to collapse
Sorry, I can't speak English, I communicate through Google Translate. I don't understand what "I c" means.
ANFOR7 said:
Sorry, I can't speak English, I communicate through Google Translate. I don't understand what "I c" means.
Click to expand...
Click to collapse
I c = I see