Device - SM-A205FN.
Firmware - A205FNXXSACVB1.
Custom ROM - AospExtended-v9.0-a20-UNOFFICIAL-20220225-2212.
TWRP version - 3.6.1_9-0 [official].
I can’t install this ROM in any way, because when flashing into TWRP, error 1 pops up. I tried to clear various partitions and also deleted the first two lines of the updater-script file.
ANFOR7 said:
Device - SM-A205FN.
Firmware - A205FNXXSACVB1.
Custom ROM - AospExtended-v9.0-a20-UNOFFICIAL-20220225-2212.
TWRP version - 3.6.1_9-0 [official].
I can’t install this ROM in any way, because when flashing into TWRP, error 1 pops up. I tried to clear various partitions and also deleted the first two lines of the updater-script file.
Click to expand...
Click to collapse
Is that latest stock already?
Used "format data" as well?
Changing file system to and fro helped me once when formatting didn't help.
bmwdroid said:
Is that latest stock already?
Used "format data" as well?
Changing file system to and fro helped me once when formatting didn't help.
Click to expand...
Click to collapse
Did you change the file system of the system and did it help you avoid error 1?
I use the latest official firmware and the latest version of the official TWRP and also format the data before installing a custom ROM.
ANFOR7 said:
Did you change the file system of the system and did it help you avoid error 1?
Click to expand...
Click to collapse
Yes. To f2fs and back to ext4.
ANFOR7 said:
I use the latest official firmware and the latest version of the official TWRP and also format the data before installing a custom ROM.
Click to expand...
Click to collapse
bmwdroid said:
Yes. To f2fs and back to ext4.
Click to expand...
Click to collapse
Did you reboot?
ANFOR7 said:
Did you reboot?
Click to expand...
Click to collapse
Yes to TWRP
bmwdroid said:
Yes to TWRP
Click to expand...
Click to collapse
Did not help(
ANFOR7 said:
Did not help(
Click to expand...
Click to collapse
Sorry to hear that.
Last thing I would try is flashing latest stock ROM and start from scratch.
bmwdroid said:
Sorry to hear that.
Last thing I would try is flashing latest stock ROM and start from scratch.
Click to expand...
Click to collapse
This is what I do before every attempt to install a custom ROM.
bmwdroid said:
Sorry to hear that.
Last thing I would try is flashing latest stock ROM and start from scratch.
Click to expand...
Click to collapse
Should I try to lock and then unlock the bootloader back? I heard it clears partitions completely. By the way, in the TWRP tar-archive, not only custom recovery.img, but also custom vbmeta.img to bypass protection. Could this be causing error 1?
ANFOR7 said:
Should I try to lock and then unlock the bootloader back?
Click to expand...
Click to collapse
can't give you any advice here. I'd search other threads before to learn more what happens then.
ANFOR7 said:
I heard it clears partitions completely.
Click to expand...
Click to collapse
afaik it's only doing a factory reset.
ANFOR7 said:
By the way, in the TWRP tar-archive, not only custom recovery.img, but also custom vbmeta.img to bypass protection. Could this be causing error 1?
Click to expand...
Click to collapse
Probably but I'm not sure
Edit: just had a look inside the official twrp-3.6.1_9-0-a20.img.tar and I see only recovery.img
Where did you get the TWRP you're using from.
bmwdroid said:
just had a look inside the official twrp-3.6.1_9-0-a20.img.tar and I see only recovery.img
Where did you get the TWRP you're using from.
Click to expand...
Click to collapse
Someone on another forum gave me an archive with recovery.img, boot.img and vbmeta.img. I extracted only vbmeta.img from there and put it in the archive with the official twrp.
Link to the file: https://ru.files.fm/f/wdzcpqbjd
ANFOR7 said:
Someone on another forum gave me an archive with recovery.img, boot.img and vbmeta.img. I extracted only vbmeta.img from there and put it in the archive with the official twrp.
Link to the file: https://ru.files.fm/f/wdzcpqbjd
Click to expand...
Click to collapse
I c
bmwdroid said:
I c
Click to expand...
Click to collapse
Sorry, I can't speak English, I communicate through Google Translate. I don't understand what "I c" means.
ANFOR7 said:
Sorry, I can't speak English, I communicate through Google Translate. I don't understand what "I c" means.
Click to expand...
Click to collapse
I c = I see
Related
So I have the Nexus 6P rooted and unlocked. For some reason when I try to access files on my phone I can't find them via TWRP such as downloads to flash something. I went to advance and DATA cannot be checked. What should I do in order to resolve this so I can flash files from data?
AquaticXi said:
So I have the Nexus 6P rooted and unlocked. For some reason when I try to access files on my phone I can't find them via TWRP such as downloads to flash something. I went to advance and DATA cannot be checked. What should I do in order to resolve this so I can flash files from data?
Click to expand...
Click to collapse
What version of TWRP are you using?
Heisenberg said:
What version of TWRP are you using?
Click to expand...
Click to collapse
2.8.7 the newest, I downloaded it from TWRP.
AquaticXi said:
2.8.7 the newest, I downloaded it from TWRP.
Click to expand...
Click to collapse
Did you mount the Internal SD as read only? I had a similar issue and needed to do that first.
Heisenberg said:
What version of TWRP are you using?
Click to expand...
Click to collapse
dratsablive said:
Did you mount the Internal SD as read only? I had a similar issue and needed to do that first.
Click to expand...
Click to collapse
I tried, but TWRP only allows me to mount the cache and OTG.
AquaticXi said:
2.8.7 the newest, I downloaded it from TWRP.
Click to expand...
Click to collapse
You missed a digit in the version number, can you please clarify exactly which version? Which modified boot.img are you using?
Heisenberg said:
You missed a digit in the version number, can you please clarify exactly which version? Which modified boot.img are you using?
Click to expand...
Click to collapse
I figured it out, I needed two things to update my TWRP to 2.8.7.2 so it can allow encrypting and also Banks Gapps which works best in case someone needs help in the future.
AquaticXi said:
I figured it out, I needed two things to update my TWRP to 2.8.7.2 so it can allow encrypting and also Banks Gapps which works best in case someone needs help in the future.
Click to expand...
Click to collapse
I'm having the same issue with TWRP. Can you please tell me how you fixed it?
Searched all over XDA, could not find one. The only one which is there is of an October build. Anyone has the flashable of the latest build including the January security fixes?
rajarshi10 said:
Searched all over XDA, could not find one. The only one which is there is of an October build. Anyone has the flashable of the latest build including the January security fixes?
Click to expand...
Click to collapse
Just download the factory image and use fastboot to flash the update.
Shockz said:
Just download the factory image and use fastboot to flash the update.
Click to expand...
Click to collapse
That is one thing that can be done, but I like keeping a backup zip in case something goes wrong. So you have it? Or know anyone who has it?
rajarshi10 said:
That is one thing that can be done, but I like keeping a backup zip in case something goes wrong. So you have it? Or know anyone who has it?
Click to expand...
Click to collapse
The image you download is yours to keep.
https://developers.google.com/android/nexus/images?hl=en#angler
Shockz said:
Just download the factory image and use fastboot to flash the update.
Click to expand...
Click to collapse
XxMORPHEOUSxX said:
The image you download is yours to keep.
https://developers.google.com/android/nexus/images?hl=en#angler
Click to expand...
Click to collapse
And doesn't this wipe the internal storage as well?
rajarshi10 said:
And doesn't this wipe the internal storage as well?
Click to expand...
Click to collapse
If you use the flash all script. Otherwise you can pick and choose what images you want to use.
I read that you can use the flash-all script without it deleting all your data. Just open the script with a text editor and remove "-w" from the last line. I personally did NOT do that, its just something I've read here on XDA. I followed Heisenberg's guide, step 10, to a T and everything went well. Remember you will have to reflash recovery and SuperSU again if you want those back.
Good night, I wanted to return from nougat to MM flashing for fastboot but when flashing the cust it appears "failed (remote partition error)" and when flashing the system it appears "failed (remote: sparse flash write failure)", someone who can help me to Flash again MM
just search, there's a guide
-edit- link: https://forum.xda-developers.com/hu...t/android-7-emui-5-0-vns-l31-l21-l23-t3513816
mjz2cool said:
just search, there's a guide
-edit- link: https://forum.xda-developers.com/hu...t/android-7-emui-5-0-vns-l31-l21-l23-t3513816
Click to expand...
Click to collapse
The problem is that I run out of operating system
Arn2305 said:
The problem is that I run out of operating system
Click to expand...
Click to collapse
what do you mean by running out of operating system?
mjz2cool said:
what do you mean by running out of operating system?
Click to expand...
Click to collapse
When I flash it I run out of system OS, just enter the recovery twrp revolution, it's practically bricketed.
Try to update the MM by three buttons but it seems as if it does not flash your recovery
Arn2305 said:
When I flash it I run out of system OS, just enter the recovery twrp revolution, it's practically bricketed.
Try to update the MM by three buttons but it seems as if it does not flash your recovery
Click to expand...
Click to collapse
you can't flash oeminfo in revolution twrp and then flash update.app with 3 buttons?
mjz2cool said:
you can't flash oeminfo in revolution twrp and then flash update.app with 3 buttons?
Click to expand...
Click to collapse
It appears that you can not flash the oeminfo because there is no system.
What previously was flashear MM recovery and could be installed the rom by three buttons, but now it appears that flashea the MM recovery but when I try to enter the cell appears as if it did not have recovery
Arn2305 said:
It appears that you can not flash the oeminfo because there is no system.
What previously was flashear MM recovery and could be installed the rom by three buttons, but now it appears that flashea the MM recovery but when I try to enter the cell appears as if it did not have recovery
Click to expand...
Click to collapse
just to be clear, what recovery have you got installed? you need revolution recovery
mjz2cool said:
just to be clear, what recovery have you got installed? you need revolution recovery
Click to expand...
Click to collapse
I only have recovery nougat revolution installed
Arn2305 said:
Yes, because I think I can install a backup by revolution since I can enter your recovery
Click to expand...
Click to collapse
and flashing the correct oeminfo doesn't work?
mjz2cool said:
and flashing the correct oeminfo doesn't work?
Click to expand...
Click to collapse
Correct does not flashea for not having system
mjz2cool said:
and flashing the correct oeminfo doesn't work?
Click to expand...
Click to collapse
Correct does not flashea for not having system
Arn2305 said:
Correct does not flashea for not having system
Click to expand...
Click to collapse
there are people with the same problem and got it solved, try to find those threads
mjz2cool said:
and flashing the correct oeminfo doesn't work?
Click to expand...
Click to collapse
I'm looking for but can not find a solution
Arn2305 said:
I'm looking for but can not find a solution
Click to expand...
Click to collapse
i can't give you a link, but it's there
mjz2cool said:
i can't give you a link, but it's there
Click to expand...
Click to collapse
thanks
So this week i hadn't time enough to install the august update since my phone is rooted so i decided to do it now. What i did before trying to download the update :
1.Deleted all magisk modules that i had then rebooted
2.Unistalled magisk using restore image then rebooted
3.Went to sys update downloaded and it says installation failed
What do to? I'm not rooted now and i don't have twrp installed.
PS. don't want to install it via fastboot/miflash
Follow this guide in future. https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
To fix your problem now, find a stock boot image for your update version you are currently on and flash it.
emiljano539 said:
PS. don't want to install it via fastboot/miflash
Click to expand...
Click to collapse
If you don't want to use Miflash (Why ?) you can boot temporary TWRP and flash .zip here:
https://forum.xda-developers.com/showpost.php?p=77353883&postcount=542
sipollo said:
If you don't want to use Miflash (Why ?) you can boot temporary TWRP and flash .zip here:
https://forum.xda-developers.com/showpost.php?p=77353883&postcount=542
Click to expand...
Click to collapse
Do i lose my data if i flash this via twrp?
Idk i don't really trust miflash
emiljano539 said:
Do i lose my data if i flash this via twrp?
Idk i don't really trust miflash
Click to expand...
Click to collapse
You won't lose your data.
ludditefornow said:
Follow this guide in future. https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
To fix your problem now, find a stock boot image for your update version you are currently on and flash it.
Click to expand...
Click to collapse
flashed the stock boot image tried to install it but again it shows that error , i guess the only thing i can do is to flash it manually via fastboot/miflash
sipollo said:
You won't lose your data.
Click to expand...
Click to collapse
Okay thanks, do i have to remove the magisk and flash the stock boot.img or it doesn't matter?
emiljano539 said:
Okay thanks, do i have to remove the magisk and flash the stock boot.img or it doesn't matter?
Click to expand...
Click to collapse
It doesn't matter. You'll have to reinstall Magisk (if you want to).
sipollo said:
It doesn't matter. You'll have to reinstall Magisk (if you want to).
Click to expand...
Click to collapse
which one should i install from them because there are 2 tissot-T files ( for twrp)
"tissot-T-OPM1.171019.026.8.8.23.zip" or "tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip" ?
emiljano539 said:
which one should i install from them because there are 2 tissot-T files ( for twrp)
"tissot-T-OPM1.171019.026.8.8.23.zip" or "tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip" ?
Click to expand...
Click to collapse
tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip
The other file is the latest beta.
sipollo said:
tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip
The other file is the latest beta.
Click to expand...
Click to collapse
I installed the zip from twrp and now after reboot i am stucked in bootloop now i can't even boot into twrp. What to do?
After i flashed it in the end says:
Failed to mount /system Invalid argument
Which TWRP did you use?
sipollo said:
Which TWRP did you use?
Click to expand...
Click to collapse
the official one. what version should i use?
its funny now that i flashed the stock rom via mi flash tool and now again the installation shows error..
ludditefornow said:
Follow this guide in future. https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
To fix your problem now, find a stock boot image for your update version you are currently on and flash it.
Click to expand...
Click to collapse
I'm facing same issue and I was following the guide.
Same here, can't install set Ota, even after remove magisk.
Other thing, cell won't show screen to put pin to boot, previous pin of sim so I think encryption is disable!? Any idea?
After Root and Install TWRP, when I want to wipe the data accidentally I also delete the system, and when I want to reboot the device there is a notification "NO os installed! are you sure wish to reboot?"
What should I do? sorry I'm still new to this.:crying:
thank you in advance
I think you need to flash system.img back
I don't think I seen anyone upload system.img for this phone here
watatara.102 said:
I think you need to flash system.img back
I don't think I seen anyone upload system.img for this phone here
Click to expand...
Click to collapse
yeah i think no. Is there any other way ?
Arown orton said:
yeah i think no. Is there any other way ?
Click to expand...
Click to collapse
You have twrp. Flash any available custom rom or modify the Updater script in stock rom and flash it via twrp.
Go to this thread for instructions regarding editing the updater script.
https://forum.xda-developers.com/max-pro-m2/how-to/unroot-relock-bootloader-max-pro-m2-t3885870
After flashing the stock rom flash the decrypt zip too.