Database Users

Touchwiz stock pre rooted kitkat 4.4.2 NB4(zip)

Disclaimer:
This is touchwiz rom.
supersu will fc but it works.
not my work or any leak.
use at own preference.
i will not be responsible.
do not share link anywhere to other sites. pls be this low and leaker anonymous.
no need bootloader.
do not ask for n3 features.
do not make mirrors even if its down.
Downloads:
http://goo.gl/rf0QMQ
Instructions :
full wipe recommended then flash using philz v6.15.4.0 or v6.19.3.0
make update binary in philz option from (x) to () then flash.will solve all errors and boot.
link to philz :http://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7100
P.S.
How to screen record ???
http://howto.cnet.com/8301-11310_39-57610905-285/how-to-record-your-screen-on-android-4.4-kitkat/
How to enable art??
(this will bootloop/stuck on samsung logo for sure 100%)
go to recovery mount /system and /data
then use adb
Code:
adb pull /data/property/persist.sys.dalvik.vm.lib
open the file and replace the "libart.so" with "libdvm.so" (no quotes) and vice versa.
for dalvik use "libdvm.so" ///////////// for art use "libart.so"
Code:
adb push persist.sys.dalvik.vm.lib /data/property/
Reboot
enjoy bootloop.
some files might be missing.
why?? bcoz if anyone can find how to enable art then it will be too beautiful.
Credits :
XDA for all guides and some materials.​

Reserved ?
Sent from my GT-N7100 using Tapatalk

Deleted

tryunus said:
Any more informations? TW/CM? Screenshots? That we know what we flash
Click to expand...
Click to collapse
no ss sorry. its tw rom.

Note- Those facing problem with bootloop, flash TWRP 2.6.3.1. You don't even need to select any option like in Philz as stated in OP. Just do a clean install (wipe system, data, dalvik, cache).

i'm hoping someone will post some screenshot :fingers-crossed:

Whatever....

Tnx ravi.

thank you so much ..

update : supersu will fc but it works.. only app needs to be updated i think from chainfire for this leak.
or kernel to be patched for permissive or disabled.

Thank you, @ravijani--it's too tempting an opportunity to miss.

does this have knox or any bootloader in the rom ?
and it is possible to go back to 4.3 if required

cc154 said:
does this have knox or any bootloader in the rom ?
and it is possible to go back to 4.3 if required
Click to expand...
Click to collapse
did i said its tar file?? i said flash with latest recovery.
knox wont be a problem.

cc154 said:
does this have knox or any bootloader in the rom ?
and it is possible to go back to 4.3 if required
Click to expand...
Click to collapse
No,its knox free and without BL
Yes,you can revert to 4.3

I guess there a zillion folks downloading right NOW--speeds are sloooooow.........patience, please.

mannyvinny said:
No,its knox free and without BL
Yes,you can revert to 4.3
Click to expand...
Click to collapse
Thanks for the reply - just wanted to be sure - Thank you

I have a problem , i came from stock 4.3 , i flashed the rom in philz with full wipe twice and still stuck at the samsung logo.
Any suggestions?

romica said:
I have a problem , i came from stock 4.3 , i flashed the rom in philz with full wipe twice and still stuck at the samsung logo.
Any suggestions?
Click to expand...
Click to collapse
flashed properly??

ravijani said:
flashed properly??
Click to expand...
Click to collapse
First time yes the rom flashed properly and stuck at samsung logo , then i flashed the latest philz recovery 6.19.3 and almost at the end of the flashing i had error 7.
I will try again , now i'm flashing via odin the official 4.3 ENA3 and i will try again

Silly question--but, did you make a Nandroid backup before flashing the 4.4.2 ROM?? If so, why not restore?

Nexus 10 does not boot after Update

After attempt at installing software update to Nexus 10 tablet will not boot. Have wiped Cache and even then did a factory reset. Nothing. Google appears and then twirling colorful dots and nothing. For hours just twirling dots., Samsung and Google and Best Buy geeks says nothing they can do. No longer under warranty but very upset since tablet was working great until update. I am not very tech savvy but can anyone help or do I just have a new paperweight? Thanks for any advice.
I have not made any modifications to the tablet.

Just flash the newest factory image. Get it and the instructions to flash it from here:
https://developers.google.com/android/nexus/images

yes flash the newest image

After getting a notification of the latest update I went and rebooted for the update to install but it went to the twrp recovery and nothing happens, is there a way to install the update?

VivaErBetis said:
Just flash the newest factory image. Get it and the instructions to flash it from here:
https://developers.google.com/android/nexus/images
Click to expand...
Click to collapse
Gibbothegreat said:
After getting a notification of the latest update I went and rebooted for the update to install but it went to the twrp recovery and nothing happens, is there a way to install the update?
Click to expand...
Click to collapse
Still having proble? what is your recovery ? stock? did you update the bootloader? depending on your answer I should be able to help you out, thx

Khaon said:
Still having proble? what is your recovery ? stock? did you update the bootloader? depending on your answer I should be able to help you out, thx
Click to expand...
Click to collapse
Hi Khaon, I have stock lollipop version 5.1.1 . (LMY47V) and latest twrp version. When upgrading it restarts and goes to recoverys main screen.
BTW how can I check which version my bootloader is?

same problem
VivaErBetis said:
Just flash the newest factory image. Get it and the instructions to flash it from here:
as a newbie .I'm not allowed to reference your link !!
I rooted my nexus 10 using xda instructions., installed CWM. All good. I tried backup and recovery and screwed something up in recovery. Got stuck in recovery mode reboot loop. Many gyrations, no fix, so I tried factory reset. Still no fix.
I decided to install a new version of the OS using the Mantaray tar you reference above. UBS connecting and fastboot. All messages look good. Now I have the problem reported in this thread. Stuck with flying balls and no boot. Very interested in any suggestions you may have.
Click to expand...
Click to collapse

Gibbothegreat said:
Hi Khaon, I have stock lollipop version 5.1.1 . (LMY47V) and latest twrp version. When upgrading it restarts and goes to recoverys main screen.
BTW how can I check which version my bootloader is?
Click to expand...
Click to collapse
So you keep just boot looping into twrp, right ?
Did you try installing a custom ROM through adb or just connecting your device?
If it keeps boot looping you gotta to wipe the full storage.

Khaon said:
So you keep just boot looping into twrp, right ?
Did you try installing a custom ROM through adb or just connecting your device?
If it keeps boot looping you gotta to wipe the full storage.
Click to expand...
Click to collapse
No, on a normal reboot or a shutdown/restart it's fine no problems there but when I try to install the update via system update it reboots into twrp. I attach a pic of my system.

Gibbothegreat said:
No, on a normal reboot or a shutdown/restart it's fine no problems there but when I try to install the update via system update it reboots into twrp. I attach a pic of my system.
Click to expand...
Click to collapse
Oh I see, well, you should just flash a custom ROM or if you want to stay with official factory images, you should just follow instruction there:
https://developers.google.com/android/nexus/images
What you do need is just have fastboot executable once you are into the bootloader.
You can easily access the bootloader from twrp : shutdown > reboot into booatloader

Cool thx for your continued help :good:

The problem is due to your attempting an OTA update with a custom recovery (TWRP). You can only do OTA with stock recovery. Once you are in this situation, your easiest way out of it is to simply apply the latest factory image using "fastboot", but this will also wipe your user data so backup any photos, music, etc. before you start. You will also have to reload programs from Playstore once the new image is installed.

7.1.1 (NMF26F, Dec 2016) - 7.0.0 (NRD91P, Dec 2016)

It's out. Download factory images on the official site. Yay!
Link : https://developers.google.com/android/ota#top_of_page

changelog? does it fix the battery loss over night?

i have a question.
i'm on N5D91L with twrp installed. do i have to flash NRD91P and then NMF26F or can i skip the NRD91P?
thanks for the help!

Turtl3z said:
i have a question.
i'm on N5D91L with twrp installed. do i have to flash NRD91P and then NMF26F or can i skip the NRD91P?
thanks for the help!
Click to expand...
Click to collapse
You don't have to flash NRD91P. Android updates are always cumulative; you never have to flash versions other than the latest.

I am on official 7.0 right now. Is it possible to go the easy route and just flash Cache, System and Vendor img? Don't wanna reflash TWRP/root.

chinesecooler said:
I am on official 7.0 right now. Is it possible to go the easy route and just flash Cache, System and Vendor img? Don't wanna reflash TWRP/root.
Click to expand...
Click to collapse
don't need to flash cache. just flash boot, system and vendor and you should be good to go.

metpage said:
don't need to flash cache. just flash boot, system and vendor and you should be good to go.
Click to expand...
Click to collapse
Thanks but I am trying to avoid flashing boot.img as it means I will have to flash recovery and root again.

chinesecooler said:
Thanks but I am trying to avoid flashing boot.img as it means I will have to flash recovery and root again.
Click to expand...
Click to collapse
You can use flashfire to save root

sideloading now
EDIT: done and running.

chinesecooler said:
Thanks but I am trying to avoid flashing boot.img as it means I will have to flash recovery and root again.
Click to expand...
Click to collapse
You wouldn't have a working camera if you skip out on flashing the 7.1.1 boot.img.
Sent from my Nexus 5X using Tapatalk

Same radio same bootloader as previous versions or need to upgrade ?

Thanks all. I was stuck at the boot animation after only doing Cache, System & Vendor.
Had to reflash the whole set (except userdata), TWRP and SU.

For anyone worried about re-rooting and all... Download the Full Firmware package and flash it with FlashFire, just did it and it works perfectly, if you have any mods like the google assistant or "surround sound" mod, you will need to re-flash them but thats all.... easy as pie....
EDIT.... You will also need to re-do your build.prop edits if you did any....

Zuk z1 stuck with teamwin recovery after clean wipe

hello,
so i was installing cm13 while installing i wiped entire partition(data,including system)
now i can only boot into recovery , i installed cm13, cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394 , after installing if i reboot it will again go to reovery only wont boot into phone..
please help
thank you

ancilary said:
i installed cm13, cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394 , after installing ..
Click to expand...
Click to collapse
That's doesn't make sense, can you explain what it means? Which recovery, which rom was installed and was working? You wipes system and data, ok. What did you do then?

strongst said:
That's doesn't make sense, can you explain what it means? Which recovery, which rom was installed and was working? You wipes system and data, ok. What did you do then?
Click to expand...
Click to collapse
hi , thanks for reply
i was using nought rom 7.0 & TEAMWIN recovery
i performed wipe ( data , cache , system , internal storage)
then installed cm13
it booted only to recovery , after that i tried flashing different rom , no use everytime it goes only to recovery..

What's with your other request? http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921
You need cm13 or stock rom? It's annoying to open several threads..

strongst said:
What's with your other request? http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921
You need cm13 or stock rom? It's annoying to open several threads..
Click to expand...
Click to collapse
that was different but i tried this and now im stuck here

ancilary said:
that was different but i tried this and now im stuck here
Click to expand...
Click to collapse
And what you need is a running cm13 now?

strongst said:
And what you need is a running cm13 now?
Click to expand...
Click to collapse
ya running cm or any other rom is fine..

ancilary said:
ya running cm or any other rom is fine..
Click to expand...
Click to collapse
seems you don't know what you need cm isn't the same as cos, the difference is huge.
For cos12.1 stock rom you can get it here http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921/post70007487
Flash it with all in one tool, it's the easiest way.
Cm13 you can flash it though twrp.

strongst said:
seems you don't know what you need cm isn't the same as cos, the difference is huge.
For cos12.1 stock rom you can get it here http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921/post70007487
Flash it with all in one tool, it's the easiest way.
Cm13 you can flash it though twrp.
Click to expand...
Click to collapse
i flashed cm-12.1-YOG4PAS3AJ-ham-signed.zip with twrp still i get booted to recovery only

ancilary said:
i flashed cm-12.1-YOG4PAS3AJ-ham-signed.zip with twrp still i get booted to recovery only
Click to expand...
Click to collapse
You didn't understand or read my post... You need to flash stock firmware with fastboot. I didn't wrote flash it with twrp.
Use the all in one tool. It's called so, because you can do all with it. Like downloading stock rom and flash it :good:

strongst said:
You didn't understand or read my post... You need to flash stock firmware with fastboot. I didn't wrote flash it with twrp.
Use the all in one tool. It's called so, because you can do all with it. Like downloading stock rom and flash it :good:
Click to expand...
Click to collapse
i tried flashing stock recovery using All in one tool but now its not booting to recovery only

ancilary said:
i tried flashing stock recovery using All in one tool but now its not booting to recovery only
Click to expand...
Click to collapse
Sorry mate, why you do that? It said to flash stock rom with all in one tool, not stock recovery

strongst said:
Sorry mate, why you do that? It said to flash stock rom with all in one tool, not stock recovery
Click to expand...
Click to collapse
i read it as recovery my bad...
now i cannot boot into recovery/fastboot.
powers on rarely too just shows zuk logo and goes off

ancilary said:
i read it as recovery my bad...
now i cannot boot into recovery/fastboot.
powers on rarely too just shows zuk logo and goes off
Click to expand...
Click to collapse
Use all in one tool to boot into bootloader. Read carefully or your next step is qfil method
Here's a good guide in case you're don't get it through aoi tool: http://forum.xda-developers.com/zuk-z1/general/qpst-method-how-to-unbrick-to-stock-t3506833
But better to check again if you can flash stock cos rom with tool

strongst said:
Use all in one tool to boot into bootloader. Read carefully or your next step is qfil method
Here's a good guide in case you're don't get it through aoi tool: http://forum.xda-developers.com/zuk-z1/general/qpst-method-how-to-unbrick-to-stock-t3506833
But better to check again if you can flash stock cos rom with tool
Click to expand...
Click to collapse
Nothing is happening in phone , no respone for any button press . its wont turn on also now

ancilary said:
Nothing is happening in phone , no respone for any button press . its wont turn on also now
Click to expand...
Click to collapse
Can you charge it?

Cannot get TWRP on Oreo, only on Nougat, phone keeps rebooting.

Hi,
I have a S8+, SM-G955F and I cannot have Android Oreo and TWRP (and then root). I only can have Android 7 and TWRP (and then root).
Current situation is: I have Android Oreo, Build G955FXXU1CRB7 is installed. Once I go to Download Mode and flash TWRP, I can boot into TWRP, but my device is not booting into Android anymore. It starts up, shows me the Samsung logo and reboots, then it shows samsung logo again and reboots.
It reboots and reboot and reboots...If I go to TWRP and make a factory reset or format data, it does not help, it only reboots when trying to start Android.
Even if I restore an older backup of boot, systems partition, it does not work...
So what do I do? I flash original Android Oreo firmware once again via Odin and get it back working, but: I loose TWRP again (and cannot flash SuperSU).
Any idea? I would like to have latest Oreo as well as TWRP recovery
Many thanks!

tobyffm said:
Hi,
I have a S8+, SM-G955F and I cannot have Android Oreo and TWRP (and then root). I only can have Android 7 and TWRP (and then root).
Current situation is: I have Android Oreo, Build G955FXXU1CRB7 is installed. Once I go to Download Mode and flash TWRP, I can boot into TWRP, but my device is not booting into Android anymore. It starts up, shows me the Samsung logo and reboots, then it shows samsung logo again and reboots.
It reboots and reboot and reboots...If I go to TWRP and make a factory reset or format data, it does not help, it only reboots when trying to start Android.
Even if I restore an older backup of boot, systems partition, it does not work...
So what do I do? I flash original Android Oreo firmware once again via Odin and get it back working, but: I loose TWRP again (and cannot flash SuperSU).
Any idea? I would like to have latest Oreo as well as TWRP recovery
Many thanks!
Click to expand...
Click to collapse
Hello, which instructions did you follow to flash again the firmware? ( i assume the firmware was the official )

StonebridgeGr said:
Hello, which instructions did you follow to flash again the firmware? ( i assume the firmware was the official )
Click to expand...
Click to collapse
Yes, it was the official one. Just searched the site, but cannot find it anymore. However, flashing the firmware does not need many steps. DOwnload the zip, extract the .tar files in it, open ODIN, load .tar files into Odin and click flash. Then it was flashed and Android was booting again.

tobyffm said:
Yes, it was the official one. Just searched the site, but cannot find it anymore. However, flashing the firmware does not need many steps. DOwnload the zip, extract the .tar files in it, open ODIN, load .tar files into Odin and click flash. Then it was flashed and Android was booting again.
Click to expand...
Click to collapse
you are right, when you flashed the official firmware, on odin did you select the Home_CSC or the CSC ?

StonebridgeGr said:
you are right, when you flashed the official firmware, on odin did you select the Home_CSC or the CSC ?
Click to expand...
Click to collapse
I think it was the CSC, but as far as I remember, I also tried the HOME_CSC in the past (not today) but the behaviour was also the same.
As far as I know difference is that with one of these files internal storage is wiped, with the other one it isn't, correct?
But what could this have to do that I get a restart-loop when flashing TWRP? I dont have a problem to flash original firmware, it works. But once I flash TWRP I cannot start Android anymore and have to reflash Android firmware again.

tobyffm said:
I think it was the CSC, but as far as I remember, I also tried the HOME_CSC in the past (not today) but the behaviour was also the same.
As far as I know difference is that with one of these files internal storage is wiped, with the other one it isn't, correct?
But what could this have to do that I get a restart-loop when flashing TWRP? I dont have a problem to flash original firmware, it works. But once I flash TWRP I cannot start Android anymore and have to reflash Android firmware again.
Click to expand...
Click to collapse
which guide did you follow to flash TWRP?
also yes the CSC not the HOME CSC wipes the internal storage

StonebridgeGr said:
which guide did you follow to flash TWRP?
also yes the CSC not the HOME CSC wipes the internal storage
Click to expand...
Click to collapse
I followed this guide: https://forum.xda-developers.com/galaxy-s8/how-to/guide-how-to-install-twrp-root-galaxy-t3752480
But also not much to follow...Download correct TWRP for S8+, load into Odin and click flash. TWRP is correct version and it works for me. But at same time, phone is not booting into Android anymore. This is why I end in reflashing original Android firmware again. I am in a loop :silly:

tobyffm said:
I followed this guide: https://forum.xda-developers.com/galaxy-s8/how-to/guide-how-to-install-twrp-root-galaxy-t3752480
But also not much to follow...Download correct TWRP for S8+, load into Odin and click flash. TWRP is correct version and it works for me. But at same time, phone is not booting into Android anymore. This is why I end in reflashing original Android firmware again. I am in a loop :silly:
Click to expand...
Click to collapse
Dude thats guide to flash and root S8 not S8+.. thats why you get bootloop, make sure to follow the correct guide next time
Here is the best guide i found for you https://www.androidinfotech.com/2018/02/root-samsung-galaxy-s8-plus-sm-g955f-oreo.html

StonebridgeGr said:
Dude thats guide to flash and root S8 not S8+.. thats why you get bootloop, make sure to follow the correct guide next time
Here is the best guide i found for you https://droidfeats.com/root-galaxy-s8-plus-variants-android-8-0-oreo-cf-auto-root/
Click to expand...
Click to collapse
thanks, but I dont think so.
From the thread I mentioned, yes, I can download TWRP for S8, not S8+, but I went to TWRP site and downloaded correct TWRP for my device. Loading into odin and flash is the same, doesnt matter which device I have.
CF Autoroot does not work for me as it is not available for Oreo firmware. I checked all this previously, I am not a that stupid guy :laugh:

tobyffm said:
thanks, but I dont think so.
From the thread I mentioned, yes, I can download TWRP for S8, not S8+, but I went to TWRP site and downloaded correct TWRP for my device. Loading into odin and flash is the same, doesnt matter which device I have.
CF Autoroot does not work for me as it is not available for Oreo firmware. I checked all this previously, I am not a that stupid guy :laugh:
Click to expand...
Click to collapse
then follow this guide, i am sure you did a wrong on the instructions, follow then without stress and do not rush . I never said you a stupid guy
https://androidjungles.com/root-samsung-galaxy-s8-plus-install-twrp-recovery-android-oreo-sm-g955f/
Download this TWRP image for your S8PLUS(twrp-3.2.1-0-dream2lte.img.tar 38.2M 2017-12-09 03:01:59 ES)
https://dl.twrp.me/dream2lte/

StonebridgeGr said:
then follow this guide, i am sure you did a wrong on the instructions, follow then without stress and do not rush . I never said you a stupid guy
https://androidjungles.com/root-samsung-galaxy-s8-plus-install-twrp-recovery-android-oreo-sm-g955f/
Download this TWRP image for your S8PLUS(twrp-3.2.1-0-dream2lte.img.tar 38.2M 2017-12-09 03:01:59 ES)
https://dl.twrp.me/dream2lte/
Click to expand...
Click to collapse
I used exactly that TWRP version today.
The only difference between my steps and the steps mentioned in your mentioned guide is that they use an older Odin version. But I already used different Odin version too
Ok, aynway, I will try it again with this guide tomorrow and will let you know about the result tomorrow. Thx so far

tobyffm said:
I used exactly that TWRP version today.
The only difference between my steps and the steps mentioned in your mentioned guide is that they use an older Odin version. But I already used different Odin version too
Ok, aynway, I will try it again with this guide tomorrow and will let you know about the result tomorrow. Thx so far
Click to expand...
Click to collapse
alright i will be waiting for you reply to my post here !!

StonebridgeGr said:
alright i will be waiting for you reply to my post here !!
Click to expand...
Click to collapse
Hi again,
I got an OTA Update this morning, so current build on phone was G955FXXU1CRC7.
I now downloaded the TWRP file you mentioned and followed the guide you mentioned.
TWRP was installed using latest Odin Version 3.13, then I tried to install SuperSU, but this failed, red error messages like failed to mount /data, unable to mount storage.
same for factory reset, does not work. I formated data, it worked. then I installed Super Su, it was possible. then I rebooted device and what shall I say, it booted into Android
Dont know what I did different now, maybe not trying to boot up Android before installing supersu.zip?
However, Now I have latest Oreo with TWRP and phone is rooted
Now I will go on and install xposed framework :good:
Many thanks for your help.

tobyffm said:
Hi again,
I got an OTA Update this morning, so current build on phone was G955FXXU1CRC7.
I now downloaded the TWRP file you mentioned and followed the guide you mentioned.
TWRP was installed using latest Odin Version 3.13, then I tried to install SuperSU, but this failed, red error messages like failed to mount /data, unable to mount storage.
same for factory reset, does not work. I formated data, it worked. then I installed Super Su, it was possible. then I rebooted device and what shall I say, it booted into Android
Dont know what I did different now, maybe not trying to boot up Android before installing supersu.zip?
However, Now I have latest Oreo with TWRP and phone is rooted
Now I will go on and install xposed framework :good:
Many thanks for your help.
Click to expand...
Click to collapse
Update: Just tried to flöash xposed framework via TWRP but it fails because of unable to mount data. Do you know why this appears?

tobyffm said:
Update: Just tried to flöash xposed framework via TWRP but it fails because of unable to mount data. Do you know why this appears?
Click to expand...
Click to collapse
Hello dude, u are gonna need to flash dm-verity 5.1 find it on google , flash it and then flash immediately flash Xposed , if the error appear again then format data, and there is a option to wipe cache and Data, wipe them too, flash dm-verity and flash immediately the Xposed, if I helped you please press thanks buttons

StonebridgeGr said:
Hello dude, u are gonna need to flash dm-verity 5.1 find it on google , flash it and then flash immediately flash Xposed , if the error appear again then format data, and there is a option to wipe cache and Data, wipe them too, flash dm-verity and flash immediately the Xposed, if I helped you please press thanks buttons
Click to expand...
Click to collapse
Hi,
I had to format data, then I wiped Cache and Data again. Tehn, I flashed dm-verity, directly after that SuperSU again and directly aafter this I flashed xposed.
Finally, all works
Many thanks for your kind help!

tobyffm said:
Hi,
I had to format data, then I wiped Cache and Data again. Tehn, I flashed dm-verity, directly after that SuperSU again and directly aafter this I flashed xposed.
Finally, all works
Many thanks for your kind help!
Click to expand...
Click to collapse
I told you you were missing something with the instructions, I am happy now everything is fine