hi. i am facing two problems, so please help me. i am using c9 pro from last 6 months... earlier i rooted my phone with cf autoroot and it worked fine. few days ago i recieved a message that c9 pro recieved nougat update so i flashed stock rom agian to unroot my phone and updated it to nougat version. i tried to root it again with cf autoroot but it failed... so i tried twrp and supersu method. i used twrp and supersu which i downloaded from xda forums for marshmallow device..... root was succesfull but now i face some issues......please help me and guide me regarding these-
1- i use mobogenie to install apps to my sd card and apps2sd to link apps data to sd card. now after nougat update both are encountering problem.... firstly when i install aps through mobogenie my phone restarts the midway and app installation is interrupted everytime.... earlier this was not happening. it starts after nougat update...
2- when i try to move any app to sd card of try to remove unnecessary apps through apps2sd. i crashes... every time i click uninstall or move to sd card apps2sd automatically restarts and nothing happened. i tried to repartition my sd card but nothing happened.
please tell me why these problem occur ? is it because i rooted device with twrp and supersu which was meant for marshmallow version ???? if yes then what is the solution ??? is there any version of twrp and supersu available which is compatible with c9 pro nougat or should i wait for them for release?????
Downgrade your phone on Marshmallow simple
Maria D'cruzz said:
Downgrade your phone on Marshmallow simple
Click to expand...
Click to collapse
I was thinking of the same.... but few nougat featues i like most. So dont want to downgrade.... but if dnt get any solution then i will surely downgrade
drvish said:
I was thinking of the same.... but few nougat featues i like most. So dont want to downgrade.... but if dnt get any solution then i will surely downgrade
Click to expand...
Click to collapse
So u have indian variant c9 pro did u read my post..? Can u give me SamsungIME.Apk And libswiftkeysdk-java.so file i mean i want Indian variant keyboard u can easily find it in your phone by Root Explorer
what are avantages of N rom vs M rom ?
maria >>> https://ufile.io/f196j
put in system /app and set permision 644, reboot
criszz said:
what are avantages of N rom vs M rom ?
maria >>> https://ufile.io/f196j
put in system /app and set permision 644, reboot
Click to expand...
Click to collapse
@criszz thanks does it not need the libswiftkeysdk-java.so file..? In the lib folder..? I mean would it work only by SamsungIME.Apk I'm asking about libswiftkeysdk-java.so file because i have C9 Hk variant
Maria D'cruzz said:
So u have indian variant c9 pro did u read my post..? Can u give me SamsungIME.Apk And libswiftkeysdk-java.so file i mean i want Indian variant keyboard u can easily find it in your phone by Root Explorer
Click to expand...
Click to collapse
Can u pls tell me where to find libswiftkeyadk file. I will send u if found
@criszz its not working which u gave
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------- Post added at 06:43 PM ---------- Previous post was at 06:36 PM ----------
drvish said:
Can u pls tell me where to find libswiftkeyadk file. I will send u if found
Click to expand...
Click to collapse
@drvish open Root Explorer goto System--> App--->SamsungIME there will be SamsungIME.Apk
Then goto System-->Lib-->there would be libswiftkeysdk-java.so file
Maria D'cruzz said:
@criszz its not working which u gave
---------- Post added at 06:43 PM ---------- Previous post was at 06:36 PM ----------
@drvish open Root Explorer goto System--> App--->SamsungIME there will be SamsungIME.Apk
Then goto System-->Lib-->there would be libswiftkeysdk-java.so file
Click to expand...
Click to collapse
I found samsungIME.Apk but didnt find libswiftkeysdk file.
drvish said:
I found samsungIME.Apk but didnt find libswiftkeysdk file.
Click to expand...
Click to collapse
Tell me ur email id i will mail u. Dont know how to share here on xda forum. Also can u do me a favour... can u or others pls provide me modified mixer path file to boost volume or just tell me which file to modify and which string. There are so many mixer path files.
drvish said:
I found samsungIME.Apk but didnt find libswiftkeysdk file.
Click to expand...
Click to collapse
Ohk Thanks
---------- Post added at 10:31 PM ---------- Previous post was at 10:29 PM ----------
drvish said:
Tell me ur email id i will mail u. Dont know how to share here on xda forum. Also can u do me a favour... can u or others pls provide me modified mixer path file to boost volume or just tell me which file to modify and which string. There are so many mixer path files.
Click to expand...
Click to collapse
U can upload on Google Drive [email protected] its my Gmail
Maria don't try to install, just copy to system priv-app and set permision. It will work without any adițional file
Maria D'cruzz said:
Ohk Thanks
---------- Post added at 10:31 PM ---------- Previous post was at 10:29 PM ----------
U can upload on Google Drive [email protected] its my Gmail
Click to expand...
Click to collapse
I shared it with u. Check.it
criszz said:
Maria don't try to install, just copy to system priv-app and set permision. It will work without any adițional file
Click to expand...
Click to collapse
I have put it in system priv-app and set the permission but its still showing old keyboard Chinese HK keyboard ? ? ? ? i also replace it with old keyboard but not working i think its Nougat keyboard and i have Marshmallow the old keyboards and all keyboards apk's showing like this
And this which u send showing like this
Maria D'cruzz said:
I have put it in system priv-app and set the permission but its still showing old keyboard Chinese HK keyboard ? ? ?
Click to expand...
Click to collapse
Related
Read instructions before ask silly questions!
This is the latest Jelly Bean Leak - XXDLH6.
Lots of the users couldn't install the OTA, so here's the full version.
How to install:
Extract the zip in SDCard --> clockworkmod --> folder (for example JB) --> files here
Go to CWM --> Backup & Restore --> Restore from internal storage
The ROM is NOT rooted.
You should root it yourself.
Enjoy
Google Drive download: https://docs.google.com/open?id=0B03kuDevWNTFUkgzY2hPWDZQYm8
Multiupload download: http://www.multiupload.nl/D958B28I97
Please say thanks If this helped you!
I recommend you to wipe dalvik cache, battery stats & cache partition before you run the rom (for best smoothness and no FC)
If for some reason you can't find clockworkmod folder (to restore the backup), make a new backup and then replace the files from your backup with the files from the ZIP I provided.
MD5 checksum mismatch only happens when you try to install the whole zip file which is wrong! Extract like it's stated in the instructions.
You can restore this backup over every rom you want.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credits: Samsung-Updates.com
could you share XXDLH6' modem.bin also please?
thanks.
Having a problem on the link
Edit: Nevermind . Silly me
Repulsa said:
Having a problem on the link
Click to expand...
Click to collapse
Link is working.
radeonxt said:
could you share XXDLH6' modem.bin also please?
thanks.
Click to expand...
Click to collapse
I've just tried to extract it and get some ridiculous sizes sort of 76 MB (second time was 114). So probably I'm making mistake somewhere.
Let's wait for CyanogenMod Team to release the modem.
support chinese language ?
THX
To root this after doing the nandroid backup, I should use CF-Root for SGS3 v6.4 and flash using desktop odin?
dereknas said:
To root this after doing the nandroid backup, I should use CF-Root for SGS3 v6.4 and flash using desktop odin?
Click to expand...
Click to collapse
I don't know how many times this have been repeated. Yes!
dereknas said:
To root this after doing the nandroid backup, I should use CF-Root for SGS3 v6.4 and flash using desktop odin?
Click to expand...
Click to collapse
Yes
yangkwong said:
support chinese language ?
THX
Click to expand...
Click to collapse
The last language is with some symbols - looks like chinese or japanese (I don't make difference sorry). I'm not sure.
Jack Barrett said:
The last language is with some symbols - looks like chinese or japanese (I don't make difference sorry). I'm not sure.
Click to expand...
Click to collapse
OK, let me try it
thanks man...the other download was damn slow.!!!
Can somebody confirm it's working? WiFi issues?
very sad to say......no chinese language support:crying:
---------- Post added at 05:33 PM ---------- Previous post was at 05:28 PM ----------
Jack Barrett said:
Can somebody confirm it's working? WiFi issues?
Click to expand...
Click to collapse
no problem for wifi.....
yangkwong said:
very sad to say......no chinese language support:crying:
---------- Post added at 05:33 PM ---------- Previous post was at 05:28 PM ----------
no problem for wifi.....
Click to expand...
Click to collapse
Don't worry. 1 more week until we get the final official version.:laugh:
can this be flashed on the latest I9300XXBLH1_I9300ODDBLG2_INU ?
Jack Barrett said:
Don't worry. 1 more week until we get the final official version.:laugh:
Click to expand...
Click to collapse
I hope so.....
---------- Post added at 05:39 PM ---------- Previous post was at 05:38 PM ----------
lastword112 said:
can this be flashed on the latest I9300XXBLH1_I9300ODDBLG2_INU ?
Click to expand...
Click to collapse
Any kind of firmware, use CWM recovery:good:
lastword112 said:
can this be flashed on the latest I9300XXBLH1_I9300ODDBLG2_INU ?
Click to expand...
Click to collapse
Questions like this are answered in the first post. People who don't read make me sick.
Jack Barrett said:
Questions like this are answered in the first post. People who don't read make me sick.
Click to expand...
Click to collapse
couldn't of said it better
pls can someone make a flashable XP of the new modem pls thanks
Sent from my GT-I9300 using xda premium
Hi!
I got a honor 7 PLK-AL10 64GB version and I just upgraded it to Android 5.1.1 with the site/download of EMUi huawei com in the chinese version.
Has anyone done this also? Why is it not noted here before?
Is this fine with you? As thats the CN version, not a europe version, but it works fine so far.
Has anyone got the Huawei Cloud got to run and download themes?
thank you,
echelon
Most people here have the 16gb European version, not the Chinese version, and I'm not sure if they are inter-compatible.
I have PLK-UL00 16GB,,,Can i install 5.1.1?I am rooted and bootloader unlocked with english twrp recovery
frago21ps said:
I have PLK-UL00 16GB,,,Can i install 5.1.1?I am rooted and bootloader unlocked with english twrp recovery
Click to expand...
Click to collapse
Yes you can, but first you have to do unroot and install stock recovery.
5.1.1 ROM is a Developer Edition, but it works for me as a stable version.
You did not write what is your rom and I do not know if there is a valid order of installation:
B173 (5.0.2) - B708 (5.1.1) - 5.11.1 (5.1.1)
http://www.emui.com/plugin.php?id=hwdownload&mod=detail&mid=171
I have b173, thanks!are they any difference from 5.0.2?
frago21ps said:
I have b173, thanks!are they any difference from 5.0.2?
Click to expand...
Click to collapse
Use google translate:
http://club.huawei.com/thread-6034047-1-17.html
Regards
I'm try update B708 my plk-al10 with local update, but my phone reboot and start twrp, how I can do, any solution?
Using fastboot you can flash the stock recovery and update or flash the rom itself
I have a Honor 7 16gb EU (PLK-L01). Does this works in my phone and how this can be installed? I do not have rooted phone. Can you tell the installation instructions? sry my bad english.
keila said:
I have a Honor 7 16gb EU (PLK-L01). Does this works in my phone and how this can be installed? I do not have rooted phone. Can you tell the installation instructions? sry my bad english.
Click to expand...
Click to collapse
If your device is not root, you download the rom version suitable for your device.
1-Unzip the downloaded file ( Recommended use 7z to extract).
2-Copy the folder dload in to Internal Storage or SD card.
3-Go to Setting app : Setting All> Updater>Menu>Local update.
4-Your device will reboot and update.
5-Enjoy
@ancola66, thanks, but where do we download the ROM from for our version, PLK-L01?
I've been on the Chinese web site with Google translate but can find any reference to the PLK-L01.
Using Chinese 64gb as well, but i haven't yet moved to developer roms because kind of lazy to update the rom every 15 days. Any new features on that ?
rotmistr said:
Using fastboot you can flash the stock recovery and update or flash the rom itself
Click to expand...
Click to collapse
Thank for your answer can you describe more detailed?
Can someone share the Firmware???
I just install it,,,but im trying to install twrp,all the time succesc but when im trying to boot into twrp from adb is making reboot,,,the twrp for 173 doesnt work in 5.1.1?
frago21ps said:
I just install it,,,but im trying to install twrp,all the time succesc but when im trying to boot into twrp from adb is making reboot,,,the twrp for 173 doesnt work in 5.1.1?
Click to expand...
Click to collapse
Chinese TWRP for 5.1.1 (2.8.6.0)
https://mega.nz/#!hdgmBCrA!llYgb8oQAn2OOM9Bqs_ZdYinFn-HgnCwhvsWDXVjZgg
ui.zip (TWRP theme in english - thanks to LePocketPc -
http://forum.xda-developers.com/showpost.php?p=62856109&postcount=5)
in phone put in - folder TWRP - folder theme
@ancola66 Thanks to installation instructions Can you say where do i download the ROM from for our version, PLK-L01?
waliej said:
Chinese TWRP for 5.1.1 (2.8.6.0)
https://mega.nz/#fm/JZ5XmZ7A
ui.zip (TWRP theme in english - thanks to LePocketPc -
http://forum.xda-developers.com/showpost.php?p=62856109&postcount=5)
in phone put in - folder TWRP - folder theme
Click to expand...
Click to collapse
Thanks but link with twrp doesnt work
---------- Post added at 10:07 PM ---------- Previous post was at 09:48 PM ----------
Someone please can share twrp for 5.5.1????
---------- Post added at 10:08 PM ---------- Previous post was at 10:07 PM ----------
Someone please can share twrp for 5.5.1????
frago21ps said:
Thanks but link with twrp doesnt work
---------- Post added at 10:07 PM ---------- Previous post was at 09:48 PM ----------
Someone please can share twrp for 5.5.1????
---------- Post added at 10:08 PM ---------- Previous post was at 10:07 PM ----------
Someone please can share twrp for 5.5.1????
Click to expand...
Click to collapse
edit link
echeloni2p said:
Hi!
I got a honor 7 PLK-AL10 64GB version and I just upgraded it to Android 5.1.1 with the site/download of EMUi huawei com in the chinese version.
Has anyone done this also? Why is it not noted here before?
Is this fine with you? As thats the CN version, not a europe version, but it works fine so far.
Has anyone got the Huawei Cloud got to run and download themes?
thank you,
echelon
Click to expand...
Click to collapse
Hi bro i m also using64gb AL10 gold
I m using themes but not using clod services also i m running the lates update..and it work fine..but really upset with contacts need +91 for whatsapp and for dialing.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i have to remove+91
Sent from my PLK-AL10 using Tapatalk
---------- Post added at 10:18 AM ---------- Previous post was at 10:16 AM ----------
Can someone tell me with root can i reduce navibar size coz xposed is not working with H7
Sent from my PLK-AL10 using Tapatalk
Hello!
Today i want to share with you guys a way to control your screen color for stock kernel
THIS IS NOT MY WORK! ALL CREDITS GOES TO savoca I JUST SHARE THIS FOR OUR LG G3!
Most important thing you must have your phone rooted!
Here are the steps:
- download kppd file, unzip, then with a root explorer cut and paste the kppd file in system/bin with permission 755
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- download postproc.conf, unzip, then with a root explorer cut and paste the postproc.conf file in system/etc with permission 644
- install from playstore ROM Toolbox Lite, open the app and go to Scripter and create new script file
- after you create the file you have to set at boot
This is all.
For edit colors, saturation and contrast you can edit the values in postproc.conf, save and reboot.:good:
UPDATE - If you dont like to use ROM Toolbox Lite or any other program to execute the file at boot you can try this method:
- with file explorer go to system/etc/ open "init.qcom.post_boot.sh" with text a editor, copy and paste this text "busybox run-parts /system/etc/init.d/" at the end of the file very important after you paste the text at the end of the file put an empty row(after the "busybox run-parts /system/etc/init.d/")
- now go to system/etc/ and create a folder with the name "init.d" with permissions 755
- after you create the init.d folder download kcal.zip (at the end of the post) and extract the kcal file, copy the file in init.d folder and set permissions 755
- the final step is to reboot the phone
enjoy
Confirmed working on my G3 D855 using Fulmics 3.5 ROM and stock kernel.
Work great thnx a lot.
PS: I find something i think is good. If anybody need to give a try.
red=245
green=245
blue=256
Hue 19
saturation 295
value 260
contrast 262
invert 0
is there a setup to make the screen look like super amoled??
I think i found a good one based on Amaranth's config:
red=249
green=245
blue=256
hue=10
sat=285
value=255
contrast=258
it works very well. Thanks .
yazilimcionline said:
it works very well. Thanks .
Click to expand...
Click to collapse
??? script is right...file is ok...
http://forum.xda-developers.com/showthread.php?t=3285025
D851. MM
OMG this was great .... Great job.... Thanks man
---------- Post added at 04:57 PM ---------- Previous post was at 04:54 PM ----------
sachs said:
??? script is right...file is ok...
http://forum.xda-developers.com/showthread.php?t=3285025
D851. MM
Click to expand...
Click to collapse
You have to put a space between kppd and /system ..... Note the space kppd /system/etc
---------- Post added at 05:00 PM ---------- Previous post was at 04:57 PM ----------
Amaranth` said:
Work great thnx a lot.
PS: I find something i think is good. If anybody need to give a try.
red=245
green=245
blue=256
Hue 19
saturation 295
value 260
contrast 262
invert 0
Click to expand...
Click to collapse
Tried and great config
thanks I'll give it a shot
So how does this look?
cm13 test
Will this work with cm 13?
r3mixXDA said:
Will this work with cm 13?
Click to expand...
Click to collapse
i don't know if this work but why won't you use kernel auditor instead? you have CM installed and ofcourse CM used custom kernel.. hmmm
r3mixXDA said:
Will this work with cm 13?
Click to expand...
Click to collapse
Yes...I install XOSP 5.2 and all good.
Sent from my LG-D851 using XDA-Developers mobile app
Can we put the script in init.id folder to auto execute it without the need to ROM Toolbox app?
IT WORKED
Thank you brah
This will work on flumics 4.2 stock kernel ?
Sent from my LG-D855 using XDA-Developers mobile app
Mercz23 said:
This will work on flumics 4.2 stock kernel ?
Sent from my LG-D855 using XDA-Developers mobile app
Click to expand...
Click to collapse
Yes...100%
Sent from my LG-D851 using XDA-Developers mobile app
Hello,
This method works on MarshMallow V30C stock ROM ?
Rom said:
Hello,
This method works on MarshMallow V30C stock ROM ?
Click to expand...
Click to collapse
Yes.. Also in Fulmics 5.0 also working very well!
Sent from my LG-F400L using XDA-Developers mobile app
daniLaLaLaLaLa said:
Yes.. Also in Fulmics 5.0 also working very well!
Sent from my LG-F400L using XDA-Developers mobile app
Click to expand...
Click to collapse
Can you tell me the best set up for best display on flumics 5.0
Sent from my LG-D855 using XDA-Developers mobile app
---------- Post added at 05:15 AM ---------- Previous post was at 04:44 AM ----------
Mercz23 said:
Can you tell me the best set up for best display on flumics 5.0
Click to expand...
Click to collapse
hello bro. can i use this file CF-Auto-Root-tre3g-tre3gxx-smn910h.zip to root my devices note 4 n910h with stock marshmallow 6.0.1
if not any root process?? thx adv
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
up
The cf-root work for android 6.0+ since verc 1.68...and yes work for me! Its verc 1.72, i have 910(H) from.nepal.
See image.
I.imgur.com/k7IqmUh.png
zocool said:
The cf-root work for android 6.0+ since verc 1.68...and yes work for me! Its verc 1.72, i have 910(H) from.nepal.
See image.
I.imgur.com/k7IqmUh.png
Click to expand...
Click to collapse
5.1.1 cf-root works flawlessly for SM-N910S 6.0.1 too.
zocool said:
The cf-root work for android 6.0+ since verc 1.68...and yes work for me! Its verc 1.72, i have 910(H) from.nepal.
See image.
I.imgur.com/k7IqmUh.png
Click to expand...
Click to collapse
Thanks for help. it's done.
more 1 question: after root do you know how to install exposed?
csc1969 said:
Thanks for help. it's done.
more 1 question: after root do you know how to install exposed?
Click to expand...
Click to collapse
Yes..sorry my english
( imgur.com/DpoiEsH )
Remember use 910H or 910C are the same for us, and dont care if say "lollipop" work for me.
1-install twrp with odin (use twrp 3.0.0, dont use 3.0.2)
Main post of xposed: (use wannan xposed is more compatible)
forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
2-install xposed.zip with twrp sdk23 32bits " forum.xda-developers.com/attachment.php?attachmentid=3730247&d=1461597143 ")
3-install .apk ( forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440 )
Here u have unistaller if u have some problem ( forum.xda-developers.com/attachment.php?attachmentid=3715847&d=1460447786 )
zocool said:
1-install twrp with odin (use twrp 3.0.0, dont use 3.0.2)
Main post of xposed: (use wannan xposed is more compatible)
forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
2-install xposed.zip with twrp sdk23 32bits " forum.xda-developers.com/attachment.php?attachmentid=3730247&d=1461597143 ")
3-install .apk ( forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440 )
Here u have unistaller if u have some problem ( forum.xda-developers.com/attachment.php?attachmentid=3715847&d=1460447786 )
Click to expand...
Click to collapse
I have twrp 3.0.2, can i install twrp 3.0.0 over 3.0.2 ???
csc1969 said:
I have twrp 3.0.2, can i install twrp 3.0.0 over 3.0.2 ???
Click to expand...
Click to collapse
I think yes! I never has to do a downgrade,...u can use 3.0.2 but is beta, my experience with 3.0.2 is a problem with MicroSd, that is i dont use 3.0.2 (Random notification on "damaged memory")
My brother have a note4 and work fine for him.
Use 3.0.2 and see how its work on you. Maybe u find some bug or not.
Again...sorry my english.
zocool said:
I think yes! I never has to do a downgrade,...u can use 3.0.2 but is beta, my experience with 3.0.2 is a problem with MicroSd, that is i dont use 3.0.2 (Random notification on "damaged memory")
My brother have a note4 and work fine for him.
Use 3.0.2 and see how its work on you. Maybe u find some bug or not.
Again...sorry my english.
Click to expand...
Click to collapse
installing failed. i got this error. can hlp
csc1969 said:
installing failed. i got this error. can hlp
Click to expand...
Click to collapse
Maybe is the twrp...is strange that xposed give error.
Use FlashFire u CAN'T miss with that ( forum.xda-developers.com/general/paid-software/flashfire-t3075433 )
...how to use?
1-Donwload from Google play, become a "tester" download & install.
2-Grant supersu acces press "+" and select "flash file or OTA".
3-select file and tilt "mount/system read/write" and press the OK tilt .
4- is gonna be black screen then alot of number and then wait around 5min on logo "samsung".
5- update system screen and done!!
Pd: on logo "samsung" just wait...dont touch and do anything. I wait 6min.
I use this program cuz i dont like recovery. 3.0.2 is beta...maybe have some error.
---------- Post added at 10:18 PM ---------- Previous post was at 10:11 PM ----------
See https://imgur.com/cQZMngZ
zocool said:
Maybe is the twrp...is strange that xposed give error.
Use FlashFire u CAN'T miss with that ( forum.xda-developers.com/general/paid-software/flashfire-t3075433 )
...how to use?
1-Donwload from Google play, become a "tester" download & install.
2-Grant supersu acces press "+" and select "flash file or OTA".
3-select file and tilt "mount/system read/write" and press the OK tilt .
4- is gonna be black screen then alot of number and then wait around 5min on logo "samsung".
5- update system screen and done!!
Pd: on logo "samsung" just wait...dont touch and do anything. I wait 6min.
I use this program cuz i dont like recovery. 3.0.2 is beta...maybe have some error.
---------- Post added at 10:18 PM ---------- Previous post was at 10:11 PM ----------
See https://imgur.com/cQZMngZ
Click to expand...
Click to collapse
1: thank you very much
2:i downgrade to twrp 3.0.0 and flash framwork and get this error.
3: i install flashfire and do the steps whille reboot nothing happen.
csc1969 said:
1: thank you very much
2:i downgrade to twrp 3.0.0 and flash framwork and get this error.
3: i install flashfire and do the steps whille reboot nothing happen.
Click to expand...
Click to collapse
Mmm that is strange...some security on? As knox? Are u sure are rooted?...what rare error.
zocool said:
Mmm that is strange...some security on? As knox? Are u sure are rooted?...what rare error.
Click to expand...
Click to collapse
Thank you for caring. it was file damaged, i redownload files and its done.
csc1969 said:
Thank you for caring. it was file damaged, i redownload files and its done.
Click to expand...
Click to collapse
lol, thanks to god was a stupid problem and not a big error... ur welcome.
#Nougat #Mate8 #Root #droidth
www.facebook.com/droidth
Download
- superuser-r275.zip from http://phhusson.free.fr/superuser-r275.zip
- Superuser 2.0 Beta 9.apk from http://forum.xda-developers.com/showpost.php?p=69224582&postcount=1896&nocache=1&z=9811859473848826
then copy it to external sdcard or with the same address nougat zip file
HOW-TO ROOT YOUR MATE 8
1. After you installed all Nougat version from TWRP don't reboot
.
2. Install superuser-r275.zip via TWRP and reboot
.
4. After reboot to system install Superuser 2.0 Beta 9.apk
.
5. Download Root checker to check rooted
.
6. Enjoy
VDO Install Nougat L29C185B520 (on C185B320) + ROOT
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
credit :
http://forum.xda-developers.com/mate-9/development/recovery-unofficial-twrp-huawei-mate-9-t3515617
Hello, it is a systemless version of root ?
Video Plz I don't understand Method 2 We will use this root method: Phh's superuser? Plz upload video how to root and Thanx ???
misho_20063 said:
Video Plz I don't understand Method 2 We will use this root method: Phh's superuser? Plz upload video how to root and Thanx ???
Click to expand...
Click to collapse
Skip number 2 it's for reference to original thread
updated instruction for easy understand.
misho_20063 said:
Video Plz I don't understand Method 2 We will use this root method: Phh's superuser? Plz upload video how to root and Thanx ???
Click to expand...
Click to collapse
ีupdated VDO
Very Thnx
somboons said:
ีupdated VDO
Click to expand...
Click to collapse
Very Thnx To upload This Video I need Asked Another Question Are This Root Turn Off Ota Update From Huawei Or no because it Bootloader On
misho_20063 said:
Very Thnx To upload This Video I need Asked Another Question Are This Root Turn Off Ota Update From Huawei Or no because it Bootloader On
Click to expand...
Click to collapse
To be honest, I don't know.
somboons said:
To be honest, I don't know.
Click to expand...
Click to collapse
Do we have full root with this method? I flash the superuser.zip in Nougat and I only have partial root even though the rootchecker confirms the phone is rooted.
Veryyy tnx.... its work on b562
Sent from my NXT-L29 using Tapatalk
mr.reza.reza said:
Veryyy tnx.... its work on b562
Sent from my NXT-L29 using Tapatalk
Click to expand...
Click to collapse
Can you cut and paste in the system partition?
[email protected] said:
Can you cut and paste in the system partition?
Click to expand...
Click to collapse
Yes
Sent from my NXT-L29 using Tapatalk
All work except titanium backup. Can't restore apps its just stuck. But if you install from play store then restore data backup from titanium backup works. Weird. Any idea?
Sent from my HUAWEI NXT-AL10 using XDA-Developers mobile app
need systemless root i guess( system is not writable ) , i dnt know why luckypatcher and adb pc cant detect root access in my device; adaway not working also busybox is weird
any idea how to move superSU app to system? i think superSU will work better than superuser
i tried disabling and updating binary via superSu but got error also corrupted the superuser app
I have twrp fot nouget mate 8
---------- Post added at 09:04 PM ---------- Previous post was at 09:00 PM ----------
Busybox apps not work in nouget I want update app..
And I want font for nougrt .
Thanks
mr.reza.reza said:
Yes
Sent from my NXT-L29 using Tapatalk
Click to expand...
Click to collapse
I follow the procedure in post #1. However I cannot cut and paste in the system partition although I can use some apk that requires root and I can cut and pass in the data partition. Is there anything that you did differently than in post #1 to be able to cut and paste in the system partition?
First of all , let me thank you for this working method to root Mate 8 that runs Android 7 EMUI 5...
But is there any way else to flash the super su itself as before in EMUI 4 through TWRP
---------- Post added at 01:01 PM ---------- Previous post was at 12:58 PM ----------
Why We Can't Flash Supersu in android 7 .. Thanks
hanygrandaton said:
First of all , let me thank you for this working method to root Mate 8 that runs Android 7 EMUI 5...
But is there any way else to flash the super su itself as before in EMUI 4 through TWRP
---------- Post added at 01:01 PM ---------- Previous post was at 12:58 PM ----------
Why We Can't Flash Supersu in android 7 .. Thanks
Click to expand...
Click to collapse
Yes we can flash - superuser-r275.zip in android 7 using twrp from http://forum.xda-developers.com/honor-8/how-to/twrp-nougat-edition-t3504140
After that we can run Superuser 2.0 Beta 9.apk from http://forum.xda-developers.com/show...11859473848826
However I only obtain partial root. I cannot cut and paste in the system partition however I can cut and paste in the data partition and run some apk like reboot manager that requires root.
When I follow the procedure suggested by post #1, I get the same result, only partial root.
[email protected] said:
Yes we can flash - superuser-r275.zip in android 7 using twrp from http://forum.xda-developers.com/honor-8/how-to/twrp-nougat-edition-t3504140
After that we can run Superuser 2.0 Beta 9.apk from http://forum.xda-developers.com/show...11859473848826
However I only obtain partial root. I cannot cut and paste in the system partition however I can cut and paste in the data partition and run some apk like reboot manager that requires root.
When I follow the procedure suggested by post #1, I get the same result, only partial root.
Click to expand...
Click to collapse
I also get partial root, cannot install busybox, can this be fixed? any workaround for this issue?