Hi all
I'm running Hyperion ROM and merruk kernel
when i connect my phone to my pc, it shows usb connected, touch for mass storage (which works fine)
but not 'usb debugging mode connected' notification
the check box in development menu is ticked
and when i plug in usb "without" checking the box
it automatically checks the box, but it still doesn't show "usb debugging mode connected' notification
my os is windows 8 consumer preview
please help
There's no such notification as "USB Debugging Mode connected". It's only "USB Mass Storage".
Anyways, just check the USB Debugging box in Settings - Applications - Development, and make sure you have the drivers installed in your PC. Then go on to do what you were about to.
||I'm just a PM away for help||
Thanks! I was on my laptop and it didnt have the samsung usb drivers
Works fine now
Hello for all.
Sorry for bad English i am french.
I have a Note 3 N9005 in 4.3 android with the rom seem XXUBMI6 (Base band).
Is someone have find USB DEBUG in the menu to activate an use some apllication like myphone for synchonyse with my PC.
Is somepne have a tutorial for make a root (safe as possible).
Thank for all can be help me.
For the USB debugging menu go to settings / about phone and click on build number like 7 times. That will enable developer options. There you will find the USB debugging option.
apascual89 said:
For the USB debugging menu go to settings / about phone and click on build number like 7 times. That will enable developer options. There you will find the USB debugging option.
Click to expand...
Click to collapse
Hello and thank you for this reponse, USB debug activate on my note 3.
Thanksssss
apascual89 said:
For the USB debugging menu go to settings / about phone and click on build number like 7 times. That will enable developer options. There you will find the USB debugging option.
Click to expand...
Click to collapse
*sigh* This is the height of sillyness... What's next?
Galaxy Note 4: To enable debugging on the new-new Note 4 you'll need to -
1. Place phone on 33° surface
2. Insert S-Pen into headphone port
3. Click Volume Up and Down 6 1/2 times
4. Whistle dixey
NOTE: Must be completed after midnight, or your Note 4 will revert to a Note 3 and start cloning rabid versions of itself
btw - thx apascual89 for the help on the Note 3 tho, it worked. :good: Now TB is happy to backup!
p.s. I knew something was up when that new search function with settings wasn't finding any hits or partial hits on any of the developer settings i'm used to seeing (at first I thought it had just been moved or maybe relabeled)
Hi Guys.
I have one Redmi Note 3 and I am having a problem to connect it to my pcs.
Before everything was ok. I connected the USB cable and I could transfer files between my pc and the Redmi Note 3 using My Computer.
Now, I connect the Note 3 and I cannot see the storage anymore. So, it's impossible to copy anything between pc or note 3.
I checked with several cables and different ports and in two different pcs. I cannot connect with MIPC Suite either. The Note 3 recharges normally.
I believe it's a driver version problem.
I am using Windows 10 and MIUI 7.1.6.0 Stable Version.
Thanks for all help.
Check if the drivers are updated to win10
The best way is to download them from miui.com or mi.com
Enamorado de mi Redmi Note 3 ?
English version not work.Install Chinese version
xylos9 said:
English version not work.Install Chinese version
Click to expand...
Click to collapse
My friend, thanks for your kind help. Could you post the link for us? I have no idea about chinese. Sorry
xylos9 said:
English version not work.Install Chinese version
Click to expand...
Click to collapse
Thanx mate..
Go to the Setting> Additional Setting and look for the "developer options"
if you cant see that option, go to the Setting> About phone and tap five times on "MIUI version", you'll see a little popup message "you a developer now", then go to Setting> Additional > Developer options and enable "developer options" and "USB debugging"
Hey Guys, even i faced the same problem but it got fixed so easily than i ever thought . As soon as you connect your phone to laptop using data cable, you will find an option called " Touch for more option" in your phone, when you touch on that option, it will prompt you with three option > Charging only , Thasfer files (MTP) and Transfer photos (PTP), when you click on these you will be able to see Internal storage, then you can copy paste whatever files you want Hope it helps.
Even after usb debugging, i can not see the storage in my pc
I had same issue with my Xiaomi Redmi 3s prime as i can not get it to connect to my PC but got it fixed .
1. enable developer option and enable USB debugging
2. reinstall MTP driver on windows using wpdmtp.inf in windows folder while your phone is connected
read full details here: [Solution] Xiaomi Phone not connecting to PC via USB
Thank you so much. I tried all the above, your suggestion worked
Perfect, Thanks it worked !
This matter works for me ! thanks
yes, it works
Thanx Alot
Thnx Alot buddy
very very thankful
Tried everything
Visited MI service center
Contacted their helpline
Tried every website
Nthing worked
Bt ur small Suggestion worked perfectly
Was trying it since last 3 days
thanks alot bro..it also worked for me
Solution to Xiaomi Phone not connecting to PC via USB
Enable developer option: go to settings>About Phone and tap MIUI version about 6 times then you will see a pop up notification that you are now a developer.
Enable USB debugging: after enabling developer option you should go to settings>additional settings>Developer options then enable USB debugging
Now connect your xiaomi phone to your PC via USB cable
On your computer go to PC>C drive>windows >INF > and look for wpdmtp.inf (make sure your xiaomi phone is connect via usb) then right click on the file wpdmtp and click install with your phone plugged in.
Note: when you connect via cable you have an option on the top notification to select either to charge only, transfer files or photos. you should select transfer file.
After this steps your Xiaomi Phone will be detected by your computer and you can access the internal memory.
you can share this steps with friends experiecing the same problem of xiaomi phone not connecting to pc
hello guys,
my red mi note 3 phone is not connecting to the pc for the recent update version 8.1.1.0 to windows 10.
I tried installing wpdmtp.inf file on windows but I get a prompt saying, INF file you have selected doesn't support this method of installation
can't connect in pc for flashing my phone
same like my redmi note 1w can't connect to my pc (no detect anything),
first i think problem with usb port in phone cz i played game with charging, but im try to jumper usb in hardware it's not problem solved. and now my phone bricked i can't do anything.... try to flashing with sp flashtool but phone not connect to pc....
my phone just in recovery mode....latest i'm try to update.zip in recovery mode always failed cz update.zip is not detect on sd card (file must in internal memory)...
pls help me
cyrilcyril70 said:
Solution to Xiaomi Phone not connecting to PC via USB
Enable developer option: go to settings>About Phone and tap MIUI version about 6 times then you will see a pop up notification that you are now a developer.
Enable USB debugging: after enabling developer option you should go to settings>additional settings>Developer options then enable USB debugging
Now connect your xiaomi phone to your PC via USB cable
On your computer go to PC>C drive>windows >INF > and look for wpdmtp.inf (make sure your xiaomi phone is connect via usb) then right click on the file wpdmtp and click install with your phone plugged in.
Note: when you connect via cable you have an option on the top notification to select either to charge only, transfer files or photos. you should select transfer file.
After this steps your Xiaomi Phone will be detected by your computer and you can access the internal memory.
you can share this steps with friends experiecing the same problem of xiaomi phone not connecting to pc
Click to expand...
Click to collapse
Thanks! This procedure worked for me on windows 10
hello everyone can anyone help me in this issue with my lenovo A600
i cant connect to PC using USB cable but it charge
when i connect it to PC the storage option not appear
when i go to developer mode the USB debugging is in grey and it cant be checked
i have the problem
me too
Revoke usb authorization from developer mode
Go to storage, select usb connection and set it to mtp.
Hey everyone,
Ive recently had a problem trying to use a few root apps with my phone that require USB debugging and to my surprise found out it turns itself off after I leave the options screen.
Is this a normal security feature? Is there a way to keep it on?
Obviously it stays on when activated and connected to USB on a PC, but that does not help me when an app needs it. I have never seen this behavior before yet everything in USB debugging sticks (except some options after re-boot like DPI)
And thats another question,
How do we keep DPI changes in developer mode to stick after reboot.
Maybe there is a config XML somewhere in the system as normal DPI changes to the sparse Build.prop do not work since dpi is controlled via rom level.
Any help or input would be appreciated if this usb debugging thing is not normal for everyone.
If anyone knows about the DPI thing that would ne also helpful