Database Users

Yu Yureka USB Connection Problem

Since many guys are not able to connect their yureka phone to PC so for them this thread might be helpful. I was also facing the same problem, even USB computer connection setting was not popping up. So following are the steps to resolve that problem.
1. Go to Settings -> About Phone -> Tap several times on Build Number to enable developer Options if you haven't enabled it yet.
2. Now You can see one setting titled "{ } Developer options" under Settings Menu. Tap on developer options and enable "Android Debugging".
3. Now connect your phone to PC via USB cable. Now You will see that your phone is successfully connected for debugging. Now without disconnection your phone from PC, go to settings->Storage->Menu (Three vertical Dots at top right corner of the screen). Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox.
4. Now you are ready to access your internal and external sd cards of your phone. Enjoy

U saved me BRO!!..was tired of using OTH
U saved me BRO!!..was tired of using OTH

Applying all things you said but yureka not connect with computer

USB Computer Connection is still not popping
Hi, I have tried all that is said above, but still I am unable to connect my Yureka to PC. USB Computer Connection is still not popping any options.. Please help

RAUSHAN0704 said:
Since many guys are not able to connect their yureka phone to PC so for them this thread might be helpful. I was also facing the same problem, even USB computer connection setting was not popping up. So following are the steps to resolve that problem.
1. Go to Settings -> About Phone -> Tap several times on Build Number to enable developer Options if you haven't enabled it yet.
2. Now You can see one setting titled "{ } Developer options" under Settings Menu. Tap on developer options and enable "Android Debugging".
3. Now connect your phone to PC via USB cable. Now You will see that your phone is successfully connected for debugging. Now without disconnection your phone from PC, go to settings->Storage->Menu (Three vertical Dots at top right corner of the screen). Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox.
4. Now you are ready to access your internal and external sd cards of your phone. Enjoy
Click to expand...
Click to collapse
well i have tried that but it wont even detect my yureka. IT DOESNT EvEN SHOW A UN RECOGNIZED DEVICE. HOW TO RESOLVe
?

Problem Solved
1. Proceed as Above.
2. Reboot your Phone.
3. Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox.
Problem Solved...

The problem is not in the phone, or can't be solved by it
Actually you have to do this via pc.
1)search update drivers and find the update device drivers option
2)in other devices find Android and double click
3)click the driver tab
4)click update driver
Worked for me ?????

PC connection Still its not working
RAUSHAN0704 said:
Since many guys are not able to connect their yureka phone to PC so for them this thread might be helpful. I was also facing the same problem, even USB computer connection setting was not popping up. So following are the steps to resolve that problem.
1. Go to Settings -> About Phone -> Tap several times on Build Number to enable developer Options if you haven't enabled it yet.
2. Now You can see one setting titled "{ } Developer options" under Settings Menu. Tap on developer options and enable "Android Debugging".
3. Now connect your phone to PC via USB cable. Now You will see that your phone is successfully connected for debugging. Now without disconnection your phone from PC, go to settings->Storage->Menu (Three vertical Dots at top right corner of the screen). Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox.
4. Now you are ready to access your internal and external sd cards of your phone. Enjoy
Click to expand...
Click to collapse
Hi..
After pressing "USB computer connection" USB setting Popup is not coming. and it says "USB is now Disconnected"
can any one please help me ?
---------- Post added at 08:05 AM ---------- Previous post was at 07:59 AM ----------
Sahil Badal said:
1. Proceed as Above.
2. Reboot your Phone.
3. Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox.
Problem Solved...
Click to expand...
Click to collapse
After pressing "USB computer connection" USB setting Popup is not coming. and it says "USB is now Disconnected"

Yureka not connect to PC
[[/B][/B]
RAUSHAN0704 said:
Since many guys are not able to connect their yureka phone to PC so for them this thread might be helpful. I was also facing the same problem, even USB computer connection setting was not popping up. So following are the steps to resolve that problem.
1. Go to Settings -> About Phone -> Tap several times on Build Number to enable developer Options if you haven't enabled it yet.
2. Now You can see one setting titled "{ } Developer options" under Settings Menu. Tap on developer options and enable "Android Debugging".
3. Now connect your phone to PC via USB cable. Now You will see that your phone is successfully connected for debugging. Now without disconnection your phone from PC, go to settings->Storage->Menu (Three vertical Dots at top right corner of the screen). Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox.
4. Now you are ready to access your internal and external sd cards of your phone. Enjoy
Click to expand...
Click to collapse
I have followed all above steps, but not shows USB connection.

I am also getting the same problem "After pressing "USB computer connection" USB setting Popup is not coming. and it says "USB is now Disconnected" ", this problem is after getting my replacement handset.

Hi, I have tried all that is said a, but still I am unable to connect my Yureka to PC. USB Computer Connection is still not popping any options.. Please help vikas meena 9694746144

Dear Sir,
As per your instruction i go to the setting but as u written
"Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox. "
after tapping computer connection nothing pop up arises. I can not enable Media Device (MTP)
Please guide me.
Suresh

vertexpac said:
I am also getting the same problem "After pressing "USB computer connection" USB setting Popup is not coming. and it says "USB is now Disconnected" ", this problem is after getting my replacement handset.
Click to expand...
Click to collapse
did u get any solution bro????..... i cant copy files to pc and root
---------- Post added at 05:33 AM ---------- Previous post was at 05:30 AM ----------
shadowkill97 said:
well i have tried that but it wont even detect my yureka. IT DOESNT EvEN SHOW A UN RECOGNIZED DEVICE. HOW TO RESOLVe
?
Click to expand...
Click to collapse
did u got any solution bro... i cant connect my yureka to pc. i want to root it. But i cant connect it

USB connection problem
I am also getting the same problem "After pressing "USB computer connection" USB setting Popup is not coming. and it says "USB is now Disconnected" ", plz help me

yureka AO 5510
Sir,
My yureka AO 5510 hardbricked and i used emmc image and enter into fastboot mode ( by only pressing power button it can switch on and work) but to flash this is not shown in device manager. I tried with usb driver, adb driver, nothing happend.... and gave to shop and changed its usb port.... but no use....
i can power on it with this memory card or go to fastboot mode.... can not connect to PC.... Please help me....

thank you for your practical guidance, because since so many days and several times I tried to connect with my laptop, last i thought to install some yu drives in my laptop, but this is a very useful points, you are putforth in this moment. once again thank you for the substantial helping tendency you have shown. may proceed it in future to help others,

i am using yu yereka lolipop os and windows 10 x64 pro and tried all method to install drivers but even when i connect my yu yureka ao5510 then it shows me (device disciptor request fail)error code 43.i did all thing from disable driver enforcement and various adb drivers but not success yet..
and when normally connet phone to pc it also not showing the adb option and mtp driver.i aslo tried with different pc but same problem....
plz guy help me!!!!

Got ot developer tools and enable the android debugging.. reboot the mobile
After reboot a pop up window will be opening and asks for disable the android debugging .. disable it in developer tools and then connect the usb cable again . then the pop up will be coming as usual ...and problem got solved

Yureka not connect to any pc
Pc shows popup that the device is malfunctioned.
In device manager it says device dicriptor request failed.

vrishabhv2 said:
i am using yu yereka lolipop os and windows 10 x64 pro and tried all method to install drivers but even when i connect my yu yureka ao5510 then it shows me (device disciptor request fail)error code 43.i did all thing from disable driver enforcement and various adb drivers but not success yet..
and when normally connet phone to pc it also not showing the adb option and mtp driver.i aslo tried with different pc but same problem....
plz guy help me!!!!
Click to expand...
Click to collapse
did you find any solution?

USB Problem

Dear All,
I share my story with my Note 4 about the USB connection error:
So I had some problem with my Note 4, and the service changed the phone to a new one.
After that I tried to copy back my archived files from my Windows PC to the phone.
When I connected the phone to my PC (Windows OS), the Windows installed the drivers, but not connected to the Kies 3 or to the Smart Switch, and I didn't see my phone in the Windows Explorer too... Of course with the charging has not any problem.
Maybe at the service, the expert forgot to setting back the mode of the USB, and its not possible to set from the Android settings.
The Solution:
1. Go to the dialer, and type *#0808#
2. The upper section of the screen select the "AP";
3. The bottom section of the screen select the"MTP + ADB"
4. Press the REBOOT button.
After the rebooting, everything works fine via USB.
Thats all.
If you are knowing this, sorry! I am using Note 4 since 6 mounts ago, but former I never met with this problem...

Oneplus 5 not recognised in Windows 10

Hi,
I've received a couple of days ago two Onplus 5.
They both work great but when I try to connect them to my desktop, they get detected as "qualcomm hs-usb diagnostics 900e" by windows 10 that states the USB device is not recognised.
The issue is reproduced on a laptop, although it did get picked up once by the laptop, only to fail on a second attempt with the same device name "qualcomm hs-usb diagnostics 900e" after I installed the driver provided by Oneplus.
I read on the forum that "qualcomm hs-usb diagnostics 900e" is normally related to Bricked phone issues, which is not my case and I don't know what to do to resolve this.
I also tried to activate the USB debug mode on the phone, but this didn't change the problem.
My windows are all up to date and my phones as well (running Android 7.1.1, OxygenOS 4.5.2)
Has anyone experienced this issue with that phone or any other?
I would greatly appreciate some help and I thank you in advance for reading this and offering advice.

Unplug phone, restart windows.
Go to settings / about phone / press build number 5-6 time (don't remember exactly how many times) to enable developer options
turn on USB debugging
select USB configuration MTP (media transfer protocol)
plug it in
Install drivers
And now on you should have it working every time you plug it to your laptop.

dcrnic said:
Unplug phone, restart windows.
Go to settings / about phone / press build number 5-6 time (don't remember exactly how many times) to enable developer options
turn on USB debugging
select USB configuration MTP (media transfer protocol)
plug it in
Install drivers
And now on you should have it working every time you plug it to your laptop.
Click to expand...
Click to collapse
Thanks dcrnic, I must have skipped a step with the debugging mode because your procedure did the trick.
Is this a normal process to have to go to Dev mode and Debug mode to be able to connect to a PC?
Thanks again for your help!:good:

Win 10 do not recognize device as it is so new. Probably in the future this will be solved on Windows end.
I found online link for drivers
https://drive.google.com/file/d/0B-LgkimFUEksbjRCY1BkWnduVW8/view?usp=sharing

Moderators
Please delete ... Today forum is so slow, and it do double posting for some reason even I press reply just once.
Thank you.

FIXED: Use stock op5 cable. The other cable that gave me issues works just fine for op2.
The phone used to be seen by win10, but since oem unlock and superSU, the computer at work doesn't recognize it. Ran the 4.5.2 update with same results. I noticed that in Developer Options -> Select USB configurations charging is selected and greyed out. Going in selecting anything else returns is to Charing.

Device Manager > Find the phone > Right click > Update drivers (or something like that) > Select driver from Computer > Select "MTP USB Device" Enjoy

I'm having the same issue. If I manage to get it to connect to the PC, then after I unplug and plug it again it gives the same not recognised balloon. It only seems to work with USB Debugging On

I ended up using the original op5 cable and it recognizes the phone right away.The cable that didn't work for op5 is not stock, but worked perfectly fine for op2.

Same issue
Even I'm facing the exact same issue on my op5

dcrnic said:
Win 10 do not recognize device as it is so new. Probably in the future this will be solved on Windows end.
I found online link for drivers
https://drive.google.com/file/d/0B-LgkimFUEksbjRCY1BkWnduVW8/view?usp=sharing
Click to expand...
Click to collapse
The drivers are on the phone, they're mounted as a drive when you plug the phone in? They even add ADB tools when you install them, they're in C:\Program Files (x86)\OnePlus USB Drivers and the ADB tools are in the Android folder within there.

djsubterrain said:
The drivers are on the phone, they're mounted as a drive when you plug the phone in? They even add ADB tools when you install them, they're in C:\Program Files (x86)\OnePlus USB Drivers and the ADB tools are in the Android folder within there.
Click to expand...
Click to collapse
Yes, they are on the phone, but computer need to recognize device to see it. It does not, so the drivers on the phone are useless in this case.

I compared this to my ZTE Axon 7. If you choose "Charge only" the Axon 7 is recognized as a USB input device. This should also happen for our OP5 but the driver (which btw. is a windows standard driver) does not contain PID 900E and also does not like to have it forced to a USB input device.
The Axon 7's PID is F006.
However, the real issue is when Windows decides to use Qualcomm's HS USB Diagnostic Interface driver which seems to give even more trouble (at least for me). When I tried to switch to MTP this would not work and my Windows 10 hung itself up when rebooting or shuting down. For now I just disabled the "Unknown device" to prevent such things from happening. Charging still works this way and the phone is correctly recognized when changing to MTP.
If you are facing the same issue, disconnect the Oneplus 5 from your PC, reboot the PC and after that launch the device manager. You need to enable hidden devices in the view menu of the device manager to see disconnected devices. Now remove the device "Qualcomm HS USB Device Interface" and also choose to uninstall the driver itself. After that you can connect your device again and it should pop up as "Unknown device". Then simply disable the device.
Regarding the drivers from Oneplus: this package is lacking a driver for the device we are seeing (VID_05C6&PID_900E).

Does anyone know if the latest update (OxygenOS 4.5.5 update) addresses this issue? It says the following as one of the bug fixes:
"To restore connectivity to a Windows 10 PC, please turn off USB debugging prior to the upgrade"

aa_chow said:
Does anyone know if the latest update (OxygenOS 4.5.5 update) addresses this issue? It says the following as one of the bug fixes:
"To restore connectivity to a Windows 10 PC, please turn off USB debugging prior to the upgrade"
Click to expand...
Click to collapse
Worked for me, only remember to Uncheck usb debugging BEFORE the update....

Hmm, didn't work for me, same behavior as before the update...Qualcomm HS-USB as soon as phone is plugged in...USB debug was off.
Sent from my ONEPLUS A5000 using Tapatalk

try changing port (and remember to restart the pc)

Just got my phone today. It updated to 4.5.5 immediately. All I did was connect it to the computer (windows 10) and everything works.

bricky23 said:
Just got my phone today. It updated to 4.5.5 immediately. All I did was connect it to the computer (windows 10) and everything works.
Click to expand...
Click to collapse
It worked the first time too, but not the second time...at that point connected detected as Qualcomm HS-USB Diagnostic, and computer won't shut down.
And yes I installed it a few time, and it works the first time connecting, but not the second time around.
Sent from my ONEPLUS A5000 using Tapatalk

I don't have my OP5 yet, but I had a very similar and difficult experience with my OP3 when I first received it on Windows 10 Pro. On top of installing the proper drivers, I also had to go into Device Manager and run some steps (I'm going off on memory so they may not be entirely accurate). The root cause is driver signature check enforced in Windows 8+. So by going into Device Manager and seeing "kedacom USB driver", right click and find the oneplus USB driver you installed above and also need to disable the driver signature enforcement (in windows 10 go to advanced startup settings, reboot and choose (I think) #7 then reboot). Then plug in the phone usb go to device mgr right click on kedacom USB driver and choose the oneplus driver.
I don't have all the steps in the right order but it should fix your issue.

Official rom important bug

I've installed official room using OSTLA, before i install my nokia6 ta1000 can connect pc such as MTP or midi or just charging, after successfully flashed and update till now in oct update no pop up when i connect to pc my nokia 6 just charging, no pop up mtp or midi or charge just charging like using adapter, does anyone feeling too? Or just me, and i need someone to fix this ps: this happen from the first flashed on jully update till oct update, i've been using much cable and reinstall windows the problem still, *sorry for bad english

And i cant connect otg fdd, please help did my usb conmector broken or this rom kernel problem? Before october update in september update my otg is normal, but my charging still normal and i can go into recovery using micro sd from charger with up volume and power button

have u enable USB debugging on Developer Option ??

hawwin88 said:
have u enable USB debugging on Developer Option ??
Click to expand...
Click to collapse
i enabled but nothing changed, do your nokia 6 TA-1000 normal when connecting to pc such as MTP mode? And can you try to using otg on nokia 6 october update?

forward12315 said:
i enabled but nothing changed, do your nokia 6 TA-1000 normal when connecting to pc such as MTP mode? And can you try to using otg on nokia 6 october update?
Click to expand...
Click to collapse
my nokia 6 TA-1000 work as normally bro, MTP mode work fine and OTG work fine too, maybe u can try this :
1. change your cable data or try on another PC
2. install app named "es explorer" on play store to OTG mode
3. install adb driver on your PC
good luck

hawwin88 said:
my nokia 6 TA-1000 work as normally bro, MTP mode work fine and OTG work fine too, maybe u can try this :
1. change your cable data or try on another PC
2. install app named "es explorer" on play store to OTG mode
3. install adb driver on your PC
good luck
Click to expand...
Click to collapse
It doesnt help..., do your nokia 6 ta 1000 on october update?

Up

forward12315 said:
I've installed official room using OSTLA, before i install my nokia6 ta1000 can connect pc such as MTP or midi or just charging, after successfully flashed and update till now in oct update no pop up when i connect to pc my nokia 6 just charging, no pop up mtp or midi or charge just charging like using adapter, does anyone feeling too? Or just me, and i need someone to fix this ps: this happen from the first flashed on jully update till oct update, i've been using much cable and reinstall windows the problem still, *sorry for bad english
Click to expand...
Click to collapse
huh? That's strange..Have tried installing the drivers? (Which pops up when you plug your phone to the pc)

DinethIrusha said:
huh? That's strange..Have tried installing the drivers? (Which pops up when you plug your phone to the pc)
Click to expand...
Click to collapse
No driver installing in pc when pluged, no pops up in my phone, my phone just charging, otg not function too, did my usb connector broken?

Hey,
Goto
Developer Option > Select USB Configuration > set it MTP
then try plugging it on your PC
(To turn Developer Options goto Settings>About and keep touching the Build Number for 5 times)
Settings > Developer Options..
I included the Screenshots below

DinethIrusha said:
Hey,
Goto
Developer Option > Select USB Configuration > set it MTP
then try plugging it on your PC
(To turn Developer Options goto Settings>About and keep touching the Build Number for 5 times)
Settings > Developer Options..
I included the Screenshots below
Click to expand...
Click to collapse
After flashed rom using ostla developer option setted on automatic with mtp mode(no need press build number), when i plugged on pc just charging and when i set to mtp and charging again no changes, and why my otg doesnt work but at early update otg working and now in november update still not working, i think its usb connector problem but i dont know is usb connector same machine with pc connection and otg or just on power management?

Connect to PC not working

Hello,
I have VNS-L21 with stock Nougat and when I connect my phone to PC it only charging my Huawei. My PC doesn't see that something is connected to him. Do you got any ideas?
P.S. I tried to reinstall HiSuite, restore to default, installed google drivers and change USB settings in dialer :/

Connect the USB cable and check your phone. I get a notification to select file transfer or charge only. HiSuite won't connect until you select file transfer mode.

Wilbo2016 said:
Connect the USB cable and check your phone. I get a notification to select file transfer or charge only. HiSuite won't connect until you select file transfer mode.
Click to expand...
Click to collapse
I did that 100 times. Could it be a software bug?

i have the same problem with that

I have some problem, computers not detect my phone but only charging, maybe hardware problem ?

same problem here