Database Users

Cant flash stock rom

Hi guys. M currently usimg Nephilim Rom V2. I was trying to flash b594 stock rom. Whenever i tried to install it with stock recovery it just says no update.app is found. Even though i extracted the update.zip file and put it in internal storage in dload folder. I cant even flash it through fastboot because it gives error even though i extracted the img files through Huawei extractor. Can anyone help!!!!

What kind of error fastboot method gives you? I always have went back to stock rom by flashing a rom in fastboot and never had problems with it

While flashing system.img i got error cant load system.img. even though it's in the same folder as adb is. There was also an error whule flashing recovery extracted from update.zip. i was flashing the recovery.img only and it says errot:too many links.

Try to re-download your adb and its related files

cheapster8 said:
Try to re-download your adb and its related files
Click to expand...
Click to collapse
Done that to same result...

So you want your original firmware correct ? If so , go here: http://consumer.huawei.com/nl-en/support/downloads/detail/index.htm?id=82749
Change region (if needed) find your phone and download that.
Once you downloaded it:
1. put it on your sd card
1.1 Since when you download the file, its gonna be in .zip or .rar format, you are gonna need to extract that and what you get out of that file (its gonna be a folder called dload) put that whole thing "dload" on to your sdcard. ( put in in a main folder of your sd card its called root folder, its where your main folders are like pictures, DCIM etc.)
2. turn off your phone leave it for a sec
3. then hold all 3 buttons ( power ,volume up , volume down) and it should start installing the thing.
Hope this helps.

Check this
https://forum.xda-developers.com/honor-4x/how-to/install-emui-4-1-4x-4c-g-play-g-play-t3515702
It's on honor 4x forum but it says it works on p8lite android 5.0 or higher.

Are you able to install stock recovery through adb? If you are, you can easily use Huawei's recovery to flash the stock firmware

cheapster8 said:
Are you able to install stock recovery through adb? If you are, you can easily use Huawei's recovery to flash the stock firmware
Click to expand...
Click to collapse
I guess u havent read my post coz i had clearly stated that i had tried flashing update through stock recovery but it says no update.app found.

keikari said:
Check this
https://forum.xda-developers.com/honor-4x/how-to/install-emui-4-1-4x-4c-g-play-g-play-t3515702
It's on honor 4x forum but it says it works on p8lite android 5.0 or higher.
Click to expand...
Click to collapse
Thanks man it was of some help. I now have b896.

hussam.aleem said:
I guess u havent read my post coz i had clearly stated that i had tried flashing update through stock recovery but it says no update.app found.
Click to expand...
Click to collapse
Ahh, sorry, I meant to say that you could try after flashing stock recovery to use EMUI updater to start the flashing.. anyway good that you got it to work

Accidentally deleted OS - how to fix?

Today, I installed TWRP and rooted my device. I tried to install Xposed but I couldn't get passed the logo screen after rebooting. To try and fix this I did an advanced wipe and got rid of everything...
I know this was very stupid! TWRP is telling me there is no OS if I try to reboot. Is there a ROM I can install to fix this? I was on the stock MM rom and have L31 version.

LeChuck85 said:
Today, I installed TWRP and rooted my device. I tried to install Xposed but I couldn't get passed the logo screen after rebooting. To try and fix this I did an advanced wipe and got rid of everything...
I know this was very stupid! TWRP is telling me there is no OS if I try to reboot. Is there a ROM I can install to fix this? I was on the stock MM rom and have L31 version.
Click to expand...
Click to collapse
I made the same mistake at some point, but managed to get it back up and running.
Download the correct version of "update.zip" for your phone.
In my case it is a L31C432 so I looked for a file called something like VNS-L31C432B160 (stock MM).
Download this (EU version) (if you have a L31C432)
Once the download is completed, rename the downloaded file to "update.zip".
While in Recovery on your phone, and it's connected to your pc, copy the "update.zip" to either the phone's internal memory or the sdcard (doesn't matter).
Grab your phone and go into "Install" in your recovery and find your "update.zip" file.
Slide and let it install it.
Once done, reboot.
Viola!
Remember the "Thanks" button if it helped :good:

SnowmanDK said:
I made the same mistake at some point, but managed to get it back up and running.
Download the correct version of "update.zip" for your phone.
In my case it is a L31C432 so I looked for a file called something like VNS-L31C432B160 (stock MM).
Download this (EU version) (if you have a L31C432)
Once the download is completed, rename the downloaded file to "update.zip".
While in Recovery on your phone, and it's connected to your pc, copy the "update.zip" to either the phone's internal memory or the sdcard (doesn't matter).
Grab your phone and go into "Install" in your recovery and find your "update.zip" file.
Slide and let it install it.
Once done, reboot.
Viola!
Remember the "Thanks" button if it helped :good:
Click to expand...
Click to collapse
Excellent, thank you! For some reason I had no way of signing into my Google account with that version, however I found a previous version in another thread on here and that works perfectly. Thanks.

how to open the recovery mode ????

Hi, why when I try to install the zip it says invalid zip format? I'm trying to install it from a TWRP

spyrkle said:
Hi, why when I try to install the zip it says invalid zip format? I'm trying to install it from a TWRP
Click to expand...
Click to collapse
It's meant to be unzipped and then flashed with the dload method. Hope that helps :good:

Bricket my Mediapad m3 w09

So after installing the new Nougat Update I bricked somehow my BTV-W09C100.
Just stuck at the bootlogo "Huawei Mediapad powered by android".
Can't enter Recovery Mode, only Fastboot (Rescue Mode). Recovery with Hisuite also don't work.
Any chance to unbrick? Somehow with Fastboot & Rescue Mode?
Thanks in advance.
Reggi
EDIT: Bought it at amazon few weeks ago. Do they replace it if I send it back to repair? Maybe someone tried it...

It can be flashed to MarshMallow if you can enter Recovery via the dload folder on the microSD card. Download the rollback package first, unpack it and then copy the dload folder from that archive to the microSD card. Start your tablet in Recovery mode and let it flash that. Then download the full package for the latest available MarshMallow package, delete the old dload folder from the microSD card and then copy the dload folder from the full firmware to it. Go into recovery one more time and after it finishes flashing you will be able to use your Mediapad again.
Packages are available here http://consumer.huawei.com/it/support/tablets/mediapadm3-it-sup.htm.

Doesn't work, I can't enter recovery mode. Only fastboot via USB connected to PC.

Use HUAWEI Multi-Tool.
In menu 6 pozition is Unbrick
On XDA

did the huawei multitool fixed.
wanna ask also if the tablet was on bootloop always charging and (1 min turned on stuck on mediapad logo)discharging

Hello
I am in this situation. Bootloop. 1 minute and then battery gone.
If I can go in fastboot I can flash the original recovery... But I can't (tablet unlocked)
I'll try with the multi tool.....
Bye

Do you have a some kind develope?

Quote:
Originally Posted by 30adi
Download and extract in dload folder on a external SD CARD - (BTV-W09 ,C100B006, EMUI4.1+ANDROID 6.0):
http://download-c1.huawei.com/downlo...40&siteCode=de
Turn off tablet.
Press volume up + volume down + power
It should start the update process.
If you had B006 on device, you should flash only this version.
Worked for me when nothing did.

The batterie didn.t died on you..i had the last beta rom And i was doing a roolback when ir happen.so don.t know What version to use.please HELP me

raul3at said:
The batterie didn.t died on you..i had the last beta rom And i was doing a roolback when ir happen.so don.t know What version to use.please HELP me
Click to expand...
Click to collapse
1) NEVER write "please help me". NEVER. We, all, are here to help others, when we are able, when we have time. A request to help is like an insult!
2) Even if English is not your mothertongue try to write WELL! One sentence per phrase, use commas and dots.
3) Use Google translator to CHECK what you wrote is translated back in your language in a understandable form!
Now, I have to admit that I don't understand what you wrote...
If the problem is the battery too low:
- you need a charger able to source 1A, an USB port it's not enough
- before doing anything let the tablet on charge for some hours, have patience!

I have the same problem, but my bootloader is locked. Am I screwed? I only have access to fastboot multi-tool won't work with a locked bootloader. Can't unlock the bootloader without the device ID which I obviously can't get. Any thoughts?

tmihai20 said:
It can be flashed to MarshMallow if you can enter Recovery via the dload folder on the microSD card. Download the rollback package first, unpack it and then copy the dload folder from that archive to the microSD card. Start your tablet in Recovery mode and let it flash that. Then download the full package for the latest available MarshMallow package, delete the old dload folder from the microSD card and then copy the dload folder from the full firmware to it. Go into recovery one more time and after it finishes flashing you will be able to use your Mediapad again.
Packages are available here http://consumer.huawei.com/it/support/tablets/mediapadm3-it-sup.htm.
Click to expand...
Click to collapse
Is anyone having issues with the rar f ile being corrupt and the update.app file not working do to that?

y2kdread said:
Is anyone having issues with the rar f ile being corrupt and the update.app file not working do to that?
Click to expand...
Click to collapse
Try using the latest WinRar version on PC or using 7zip. What file appears to be corrupted and what is its md5sum?

tmihai20 said:
Try using the latest WinRar version on PC or using 7zip. What file appears to be corrupted and what is its md5sum?
Click to expand...
Click to collapse
md5 sum is b1f88a1f7cafb11a7a11ba52fcbd9e89
the update.app appears to be corrupt. I am trying to extract the necessary files and get errors when I unrar it and when update extractor triers to extract system.img

y2kdread said:
md5 sum is b1f88a1f7cafb11a7a11ba52fcbd9e89
the update.app appears to be corrupt. I am trying to extract the necessary files and get errors when I unrar it and when update extractor triers to extract system.img
Click to expand...
Click to collapse
What is the filename?
Sent from my LG-H815 using Tapatalk

tmihai20 said:
What is the filename?
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
HUAWEI MediaPad M3 8 Firmware %28BTV-DL09 %2CC100B009%2C EMUI4.1%2BAndroid 6.0%29.rar

y2kdread said:
HUAWEI MediaPad M3 8 Firmware %28BTV-DL09 %2CC100B009%2C EMUI4.1%2BAndroid 6.0%29.rar
Click to expand...
Click to collapse
I just downloaded the same file from the same source and the md5sum on mine is 68962fa27d54444073b880a192c2a76a. I even tested the archive it is not corrupted. Try another browser.

tmihai20 said:
I just downloaded the same file from the same source and the md5sum on mine is 68962fa27d54444073b880a192c2a76a. I even tested the archive it is not corrupted. Try another browser.
Click to expand...
Click to collapse
I've downloaded the package with chrome, firefox, and IE and all three downloads fail to match the md5sum you provided. Can you upload your copy to dropbox/google drive and post the link so I can download it from that?
Thanks,
Eric

y2kdread said:
I've downloaded the package with chrome, firefox, and IE and all three downloads fail to match the md5sum you provided. Can you upload your copy to dropbox/google drive and post the link so I can download it from that?
Thanks,
Eric
Click to expand...
Click to collapse
I have re-checked the file again. I would really turn off the antivirus or anything related at least while the download is active if even this file is corrupted on your side. When you finish downloading it, let me know, so I can delete it. I do not even have the 4G Mediapad https://drive.google.com/file/d/0BwsY7NWt1tZHanZlSWxMdDM0QXM/view?usp=sharing

tmihai20 said:
I have re-checked the file again. I would really turn off the antivirus or anything related at least while the download is active if even this file is corrupted on your side. When you finish downloading it, let me know, so I can delete it. I do not even have the 4G Mediapad https://drive.google.com/file/d/0BwsY7NWt1tZHanZlSWxMdDM0QXM/view?usp=sharing
Click to expand...
Click to collapse
That worked, but I don't have the 4G media pad either! I just realized that firmware was for the wrong version of the tablet. Can you upload the version to google drive for the BTV-W09 so I can try that? I think my ISP and Huawei don't get along.

Oreo stock recovery ze520kl

Does anyone have the stock recovery Oreo for Asus Zenfone 3 ze520kl?
I need it to upgrade my rooted phone since I'm getting error "can't install this package on device version less than...".
I know I can download the .raw and extract it, but I don't have PC to do it. Using phone I couldn't find any app which allows me to extract.
Thanks for your attention

mvini_ab said:
Does anyone have the stock recovery Oreo for Asus Zenfone 3 ze520kl?
I need it to upgrade my rooted phone since I'm getting error "can't install this package on device version less than...".
I know I can download the .raw and extract it, but I don't have PC to do it. Using phone I couldn't find any app which allows me to extract.
Thanks for your attention
Click to expand...
Click to collapse
This folder will help everyone with the same problem:
https://mega.nz/#F!lw02CLpA!hpetR2-Sec1F__gHPNRE9Q!xhVEhCjB

mvini_ab said:
This folder will help everyone with the same problem:
https://mega.nz/#F!lw02CLpA!hpetR2-Sec1F__gHPNRE9Q!xhVEhCjB
Click to expand...
Click to collapse
Interesting this folder, but it is outdated, the latest firmware stock is WW-15.0410.1806.68
2018/07/13.
---------- Post added at 12:58 PM ---------- Previous post was at 12:57 PM ----------
mvini_ab said:
Does anyone have the stock recovery Oreo for Asus Zenfone 3 ze520kl?
I need it to upgrade my rooted phone since I'm getting error "can't install this package on device version less than...".
I know I can download the .raw and extract it, but I don't have PC to do it. Using phone I couldn't find any app which allows me to extract.
Thanks for your attention
Click to expand...
Click to collapse
what program do I use to extract firmware recovery?

kiq1702 said:
Interesting this folder, but it is outdated, the latest firmware stock is WW-15.0410.1806.68
2018/07/13.
---------- Post added at 12:58 PM ---------- Previous post was at 12:57 PM ----------
what program do I use to extract firmware recovery?
Click to expand...
Click to collapse
Yes, it is outdated, but it might be really useful because there are stock recoverys from ze520kl oreo version.
I believe you can extract files using 7-Zip.

mvini_ab said:
Yes, it is outdated, but it might be really useful because there are stock recoverys from ze520kl oreo version.
I believe you can extract files using 7-Zip.
Click to expand...
Click to collapse
I can not find any file that corresponds to recovery. Can you tell me what it is?

kiq1702 said:
I can not find any file that corresponds to recovery. Can you tell me what it is?
Click to expand...
Click to collapse
Sorry for answering so late.l, but here we go.
You don't have the correct file. What you have is just a file to update your phone. You need to download .RAW firmware if you want to extract stock recovery.
What are you planning to do? If you phone got bricked (like infinite loop) you can easily use that virtual folder and use the latest available (there) recovery to put your phone in normal, trust me, it'll solve the problem.
But if you really need the .RAW files, here you can some Oreo examples, not the lastest, but also work.
ZE520KL: https://drive.google.com/file/d/1Y5OVqmmAjb5PWZ6sKknzP0YnQHGyDxD0/view
ZE522KL:
https://drive.google.com/file/d/1DInYnZ4hLICjI_-cZ-NvUC_Vpzc_FnPO/view
And, in case you need some stock recovery for ZE520KL from that virtual folder, try these for ZE520KL:
[1803.55] https://mega.nz/#F!lw02CLpA!hpetR2-Sec1F__gHPNRE9Q!xhVEhCjB
[1804.61] https://mega.nz/#F!lw02CLpA!hpetR2-Sec1F__gHPNRE9Q!RgFnSKwZ
Again, I don't know what are planning to do, so my answer might not be useful. xD

mvini_ab said:
Sorry for answering so late.l, but here we go.
You don't have the correct file. What you have is just a file to update your phone. You need to download .RAW firmware if you want to extract stock recovery.
What are you planning to do? If you phone got bricked (like infinite loop) you can easily use that virtual folder and use the latest available (there) recovery to put your phone in normal, trust me, it'll solve the problem.
But if you really need the .RAW files, here you can some Oreo examples, not the lastest, but also work.
ZE520KL: https://drive.google.com/file/d/1Y5OVqmmAjb5PWZ6sKknzP0YnQHGyDxD0/view
ZE522KL:
https://drive.google.com/file/d/1DInYnZ4hLICjI_-cZ-NvUC_Vpzc_FnPO/view
And, in case you need some stock recovery for ZE520KL from that virtual folder, try these for ZE520KL:
[1803.55] https://mega.nz/#F!lw02CLpA!hpetR2-Sec1F__gHPNRE9Q!xhVEhCjB
[1804.61] https://mega.nz/#F!lw02CLpA!hpetR2-Sec1F__gHPNRE9Q!RgFnSKwZ
Again, I don't know what are planning to do, so my answer might not be useful. xD
Click to expand...
Click to collapse
Many thanks, I just wanted to know how to extract the "recovery.img" file from the .raw file.
But I realized that I was looking for the wrong file, this print I sent is from the stock rom firmware file that comes from the Asus website. (http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE552KL/UL-ASUS_Z012D-JP-15.0410.1806.68-user.zip).
Where can I find this ".RAW" file that you put there on the link, has it updated on the asus website?

@mvini_ab
Why don't you just skip the stock recovery and flash it thru twrp? Editing the updater-script bypasses the error you're getting. That's how I've been doing it for years, no issues, you just have to flash magisk or superSU afterwards.

kiq1702 said:
Many thanks, I just wanted to know how to extract the "recovery.img" file from the .raw file.
But I realized that I was looking for the wrong file, this print I sent is from the stock rom firmware file that comes from the Asus website. (http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE552KL/UL-ASUS_Z012D-JP-15.0410.1806.68-user.zip).
Where can I find this ".RAW" file that you put there on the link, has it updated on the asus website?
Click to expand...
Click to collapse
You can't find RAW files on official Asus website.
That was the most recent RAW firmware I could find.
You can flash that and update it through the phone in settings -> system -> update
Flash Tools: https://drive.google.com/file/d/0BzBzT9RsAkigcTlCSlZpMTRBV1U/view
Put your phone in droidboot mode by holding volume+ and power and then use flashtools.

wang1chung said:
@mvini_ab
Why don't you just skip the stock recovery and flash it thru twrp? Editing the updater-script bypasses the error you're getting. That's how I've been doing it for years, no issues, you just have to flash magisk or superSU afterwards.
Click to expand...
Click to collapse
I honestly don't know how to do it. Never read any tutorial teaching that. Furthermore, I don't have computer/laptop (poor enough for that), just my cellphone. =\

@mvini_ab
I've done it through my phone before with rootexplorer, it's annoying but it works. Open the updater-script in the rom zip, it's located in META-INF/com/google/android/. Be careful, there are two files in that directory, you want updater-script not updater-binary.
Open the file with a text editor, delete the first few lines, pretty much up to "ui_print target asus ww_phone release keys", and then save it back into the rom zip and flash it. I think I had to extract the script, delete it from the archive, and then add the edited script back to the archive when I was done.
Flashing magisk and wiping cache/dalvik is all you need after flashing the modified stock Rom through twrp.

wang1chung said:
@mvini_ab
I've done it through my phone before with rootexplorer, it's annoying but it works. Open the updater-script in the rom zip, it's located in META-INF/com/google/android/. Be careful, there are two files in that directory, you want updater-script not updater-binary.
Open the file with a text editor, delete the first few lines, pretty much up to "ui_print target asus ww_phone release keys", and then save it back into the rom zip and flash it. I think I had to extract the script, delete it from the archive, and then add the edited script back to the archive when I was done.
Flashing magisk and wiping cache/dalvik is all you need after flashing the modified stock Rom through twrp.
Click to expand...
Click to collapse
Nice! In the next update I'll try that. Thank you, that was really satisfying.

Thank you so much. It's really help me!! I'm going to take my phone to fixer! Thank you again! <3

HELP! Nova 3i / INE-LX2 TWRP Image

Hello All,
Is there an existing working TWRP for Nova 3i? I tried searching, I found one image that claims to be for Nova 3i from the site stupdroid . com.
I was able to flash it, but once I'm inside TWRP, the phone just restarts in maybe 5-10 seconds and just doesn't allow me to do anything.
So now I have an unlocked bootloader with no way to root
I hope someone can help.
P.S. I've asked Supersonic27543 but unfortunately, he/she doesn't have the copy anymore.

june.castillote said:
Hello All,
Is there an existing working TWRP for Nova 3i? I tried searching, I found one image that claims to be for Nova 3i from the site stupdroid . com.
I was able to flash it, but once I'm inside TWRP, the phone just restarts in maybe 5-10 seconds and just doesn't allow me to do anything.
So now I have an unlocked bootloader with no way to root
I hope someone can help.
P.S. I've asked Supersonic27543 but unfortunately, he/she doesn't have the copy anymore.
Click to expand...
Click to collapse
If you only want to root you can do that without TWRP. If you want to do that let me know in this thread.

how can i root the huawei nova 3i , modele ine-lx2, can i have help please

Supersonic27543 said:
If you only want to root you can do that without TWRP. If you want to do that let me know in this thread.
Click to expand...
Click to collapse
need to know how please

zenosteam said:
need to know how please
Click to expand...
Click to collapse
Has there been any further development on this?
I'm finding it quite hard to find a suitable TWRP image.

zenosteam said:
need to know how please
Click to expand...
Click to collapse
Sorry for the delay. Here's how, (Remember to unlock the bootloader before this!)
First, download the update.zip for this device (you can find it in Huawei Firmware Finder, remember to download the Full OTA)
Extract the update.zip, you'll see a file named update.app. Download "Huawei Update Extractor", and open the update.app with it.
Now you'll see a list of partitions. Extract the "ramdisk" partition (an . IMG file), and copy it to the Internal Storage of your device.
Download and Install Magisk Manager on your device. Open it, and press Install>Install>Patch Boot Image. Select the ramdisk image you copied to your Internal Storage. Magisk will save a patched image to /sdcard/Download/patched_boot.img.
Now install that image in Fastboot, by "fastboot flash ramdisk patched_boot.img".
Now your device should be rooted with Magisk. If for some reason your device doesn't boot, you can flash the stock ramdisk (before patching) by using the same command as above. (replace patched_boot. img with the image name) That'll cause loss of root.
Good luck!

june.castillote said:
Hello All,
Is there an existing working TWRP for Nova 3i? I tried searching, I found one image that claims to be for Nova 3i from the site stupdroid . com.
I was able to flash it, but once I'm inside TWRP, the phone just restarts in maybe 5-10 seconds and just doesn't allow me to do anything.
So now I have an unlocked bootloader with no way to root
I hope someone can help.
P.S. I've asked Supersonic27543 but unfortunately, he/she doesn't have the copy anymore.
Click to expand...
Click to collapse
How did you unlock bootloader?!?! which service???
I really need your help now..
---------- Post added at 07:44 AM ---------- Previous post was at 07:42 AM ----------
How did you unlock bootloadr?!?!? which service?
I really need your help now..

Supersonic27543 said:
Sorry for the delay. Here's how, (Remember to unlock the bootloader before this!)
First, download the update.zip for this device (you can find it in Huawei Firmware Finder, remember to download the Full OTA)
Extract the update.zip, you'll see a file named update.app. Download "Huawei Update Extractor", and open the update.app with it.
Now you'll see a list of partitions. Extract the "ramdisk" partition (an . IMG file), and copy it to the Internal Storage of your device.
Download and Install Magisk Manager on your device. Open it, and press Install>Install>Patch Boot Image. Select the ramdisk image you copied to your Internal Storage. Magisk will save a patched image to /sdcard/Download/patched_boot.img.
Now install that image in Fastboot, by "fastboot flash ramdisk patched_boot.img".
Now your device should be rooted with Magisk. If for some reason your device doesn't boot, you can flash the stock ramdisk (before patching) by using the same command as above. (replace patched_boot. img with the image name) That'll cause loss of root.
Good luck!
Click to expand...
Click to collapse
Has anyone tried this? Also, will this kill off OTA?
Currently running EMUI 9.0.1.130