Database Users

Honor 6 PLUS - NEW UPDATE!!

Hello everyone, today for the Honor 6 Plus is a new OTA is the C432B571 some people have jumped him via OTA and others not so you can download the update I put and upgrade to the latest version which is the PE-TL10C432B571.
Instructions: download, unzip and copy the folder dload update.app in SD.
LINK http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v55895/f1/full/update.zip

Awesome..!! This is just like the B190 OTA update for Honor 7.
So they are updating the Lollipop version for their devices too, this is the first approach like this I have seen.

This is an update improving mm is passed from the B560, B571 this new update

Does this work on honor 6 too?

Dynos said:
Does this work on honor 6 too?
Click to expand...
Click to collapse
No, it's for the plus

Damn, any word on when h6 gets this?

I'm on the PE-TL10C432B560 but when I tried to update it gave me "FAILED TO UPGRADE" and I was forced to restart my H6+.
Did you get the same error?
I placed my update.app in a dload folder, inside my External SD Card.
Thanks in advance

fefferico said:
I'm on the PE-TL10C432B560 but when I tried to update it gave me "FAILED TO UPGRADE" and I was forced to restart my H6+.
Did you get the same error?
I placed my update.app in a dload folder, inside my External SD Card.
Thanks in advance
Click to expand...
Click to collapse
Have you stock boot and recovery partitions? No root?
If you have, you must remove Supersu (select full unroot), flash stock partitions and then do the update.
If you don't have root, consider first and foremost a backup with Huawei Backup. Then download the zip file from here and follow the instructions.

zinko_pt said:
Have you stock boot and recovery partitions? No root?
If you have, you must remove Supersu (select full unroot), flash stock partitions and then do the update.
If you don't have root, consider first and foremost a backup with Huawei Backup. Then download the zip file from here and follow the instructions.
Click to expand...
Click to collapse
Thanks a lot mate!
With the link you provided I was able to successfully upgrade my H6+
Anyway I'm still official, no root, no unlocked bootloader.... strange considering that I lost my MotoG1 warranty after a week
Thanks again

I have downloaded the zip (didn't extract it) and i have created /dload file in internal memory and put that zip inside it, then i have open updater and select that zip and my 6+ enter in installing mode, but it stuck at 99% and it doesn't continue, someone knows whats wrong with it ?

You should have extracted it.
Extract the zip file unitl you have an update.app and put this into your dload folder. Then try updating again with force update method. If this doesn´t work

zinko_pt said:
Have you stock boot and recovery partitions? No root?
If you have, you must remove Supersu (select full unroot), flash stock partitions and then do the update.
If you don't have root, consider first and foremost a backup with Huawei Backup. Then download the zip file from here and follow the instructions.
Click to expand...
Click to collapse
Hello Zinko_pt,
I have the PE-TL10C900B331 and my phone shows me the PE-TL10C432B571 to update. If I run the automatic update it is not working. At 1% the installing stops and phone reboots.
I tried the german site with the zip and force installing but it is the same
Could you help me? No root phone
Thank you in advance

ofczi said:
Hello Zinko_pt,
I have the PE-TL10C900B331 and my phone shows me the PE-TL10C432B571 to update. If I run the automatic update it is not working. At 1% the installing stops and phone reboots.
I tried the german site with the zip and force installing but it is the same
Could you help me? No root phone
Thank you in advance
Click to expand...
Click to collapse
First I would try to get an update file that I could check its integrity either by MD5 or other form of verification. That would ruled out corrupted file cause.
Second, I would backup all my important things with native Huawei backup app into SD or PC. The I would perform a factory reset and setup just the Google account and Huawei ID if your ROM has one. Also setup HiCare app. Make sure all are updated. Then try to check update and if it works, great, if it doesn´t then try force update.
Only after update I would restore backup.

May I please ask what are the changes in this update? I am a huawei honor 6 plus user.
Thank you in advance for your response!

Does this work on PE-TL10C185B561 ?
As i worked on the steps but it stops at 5% although there is enough free space & battery charge

assemaskar said:
Does this work on PE-TL10C185B561 ?
As i worked on the steps but it stops at 5% although there is enough free space & battery charge
Click to expand...
Click to collapse
No, only it works in PE-TL10C432

zinko_pt said:
First I would try to get an update file that I could check its integrity either by MD5 or other form of verification. That would ruled out corrupted file cause.
Second, I would backup all my important things with native Huawei backup app into SD or PC. The I would perform a factory reset and setup just the Google account and Huawei ID if your ROM has one. Also setup HiCare app. Make sure all are updated. Then try to check update and if it works, great, if it doesn´t then try force update.
Only after update I would restore backup.
Click to expand...
Click to collapse
Thanks it works! Factory reset was needed. I think the problem was, that I encrypted the phone itself before.

ofczi said:
Thanks it works! Factory reset was needed. I think the problem was, that I encrypted the phone itself before.
Click to expand...
Click to collapse
From my experience, encrypted phones don´t go along with automatic turn on/off and updates.

oh.joan said:
May I please ask what are the changes in this update? I am a huawei honor 6 plus user.
Thank you in advance for your response!
Click to expand...
Click to collapse
If you're already on MM, it's just bug fixes and optimizations

Hi
my device run on PE-TL10C185B510, does this update work and what new features it will add?

Honour 7 PLK-AL10 after upgrde of software to 6 data service is not working

i want to downgrade the software to 5.1.1 lollipop and EMUI to 3.1
please help me i have down load the software when i give the command to upgrade from SD card the instillation start and fail

ashishpupri said:
i want to downgrade the software to 5.1.1 lollipop and EMUI to 3.1
please help me i have down load the software when i give the command to upgrade from SD card the instillation start and fail
Click to expand...
Click to collapse
Are you on MM? Did you download the rollback package or just the stock firmware for your device?
You need a rollback package to go back to LP from MM.

If you are on Marshmallow you have to flash the rollback first. Otherwise follow below steps.
Try to update it manually, assuming you were rooted, follow these steps:
Download your phone's lollipop firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
NOTE: If the manual flashing doesn't works or you get any errors, then first try only the force update method, i.e Putting the UPDATE.APP from which you extracted the files in dload folder of your external SDCARD and pressing Vol UP + Vol DOWN + Power button simultaneously after switching off your phone.
Sent from my PLK-L01 using Tapatalk

ashishpupri said:
i want to downgrade the software to 5.1.1 lollipop and EMUI to 3.1
please help me i have down load the software when i give the command to upgrade from SD card the instillation start and fail
Click to expand...
Click to collapse
I suggest you to backup all your stuff with Huawei native backup app. Copy it to a safe place or let it be at the SD card.
If you have root, unroot H7 in SuperSU (full unroot).
If you have TWRP recovery flash (fastboot flash recovery recovery.img) recovery file from (extracted) current version ROM.
Copy transitional package to dload folder in H7, and force update (from off state, press vol+- and power untill it shows a screen)
Then you can flash B180 full ROM and update to B190.
Restore your backup and your done.

zinko_pt said:
I suggest you to backup all your stuff with Huawei native backup app. Copy it to a safe place or let it be at the SD card.
If you have root, unroot H7 in SuperSU (full unroot).
If you have TWRP recovery flash (fastboot flash recovery recovery.img) recovery file from (extracted) current version ROM.
Copy transitional package to dload folder in H7, and force update (from off state, press vol+- and power untill it shows a screen)
Then you can flash B180 full ROM and update to B190.
Restore your backup and your done.
Click to expand...
Click to collapse
The linked transitional package is for PLK-L01 (European version), while ashishpupri has PLK-AL10 (Chinese) and he needs another rollback file, like I do. But I haven't found any rollback package that works with B380 (or B395) builds.
---------- Post added at 11:10 AM ---------- Previous post was at 11:07 AM ----------
DigiGoon said:
If you are on Marshmallow you have to flash the rollback first. Otherwise follow below steps.
Try to update it manually, assuming you were rooted, follow these steps:
Download your phone's lollipop firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
NOTE: If the manual flashing doesn't works or you get any errors, then first try only the force update method, i.e Putting the UPDATE.APP from which you extracted the files in dload folder of your external SDCARD and pressing Vol UP + Vol DOWN + Power button simultaneously after switching off your phone.
Sent from my PLK-L01 using Tapatalk
Click to expand...
Click to collapse
Is it possible to simply "overwrite" the current system with fastboot flash? You know we don't have rollback package for PLK-AL10 but want to go back to lollipop.

tgergo said:
The linked transitional package is for PLK-L01 (European version), while ashishpupri has PLK-AL10 (Chinese) and he needs another rollback file, like I do. But I haven't found any rollback package that works with B380 (or B395) builds.
---------- Post added at 11:10 AM ---------- Previous post was at 11:07 AM ----------
Flash all other extracted files similarly firing these commands.
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
NOTE: If the manual flashing doesn't works or you get any errors, then first try only the force update method, i.e Putting the UPDATE.APP from which you extracted the files in dload folder of your external SDCARD and pressing Vol UP + Vol DOWN + Power button simultaneously after switching off your phone.
Sent from my PLK-L01 using Tapatalk
Is it possible to simply "overwrite" the current system with fastboot flash? You know we don't have rollback package for PLK-AL10 but want to go back to lollipop.
Click to expand...
Click to collapse
I had the same question... The answer is in the following thread
http://forum.xda-developers.com/honor-7/help/manually-downgrading-mm-to-lp-t3469774/page1
Sent from my PLK-L01 using XDA Labs

What about "debranding"? How could it work?
It was suggested to me here:
http://forum.xda-developers.com/hon...to-android-5-emui-3-1-plk-al10-t3460784/page2

tgergo said:
Is it possible to simply "overwrite" the current system with fastboot flash? You know we don't have rollback package for PLK-AL10 but want to go back to lollipop.
Click to expand...
Click to collapse
I don't think it'll work, as rollback has some other packages too which needs to be flashed unlike the common ones.
Sent from my PLK-L01 using Tapatalk

DigiGoon said:
I don't think it'll work, as rollback has some other packages too which needs to be flashed unlike the common ones.
Sent from my PLK-L01 using Tapatalk
Click to expand...
Click to collapse
It will work, I´ve done it for PLK-01. The problem is the partitions will be messed up and you get first a nice bootloop. Then it´s a matter of trial-and-error to fash img files from full LP releases to see which work. Once I spent a whole Saturday and Sunday doing flashings and praying for the best. I got lucky.
I honestly don't recommend, AT ALL, this way. It´s a nice attempt to get your device bricked.

zinko_pt said:
It will work, I´ve done it for PLK-01. The problem is the partitions will be messed up and you get first a nice bootloop. Then it´s a matter of trial-and-error to fash img files from full LP releases to see which work. Once I spent a whole Saturday and Sunday doing flashings and praying for the best. I got lucky.
I honestly don't recommend, AT ALL, this way. It´s a nice attempt to get your device bricked.
Click to expand...
Click to collapse
The first bootloop only states that it doesn't work in a pattern, so no one should try or do it.

tgergo said:
What about "debranding"? How could it work?
It was suggested to me here:
http://forum.xda-developers.com/hon...to-android-5-emui-3-1-plk-al10-t3460784/page2
Click to expand...
Click to collapse
Yep. That is a valid strategy. Debrand and rollback.
Sent from my PLK-L01 using XDA Labs

muradulislam said:
Yep. That is a valid strategy. Debrand and rollback.
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
Can you tell me how to do it? What are the steps? How does it work? Thanks.

tgergo said:
Can you tell me how to do it? What are the steps? How does it work? Thanks.
Click to expand...
Click to collapse
I am sorry buddy. Checked multi-tool options to write the post for you but I got this (you can see it under model names in the pic below)
"Change model possible only on version of Android 5.0"
And moreover I don't see honor 7 plus supported here in the tool as you can see in the image.
If you want to check it out for yourself, head to the thread
http://forum.xda-developers.com/honor-7/general/honor-7-multi-tool-t3281176/page1
and download multi-tool but it will unlock your bootloader, root your phone and in the end, you will not get what you want. (IMHO)
The only possible way I can think of is to contact Huawei customer service with your problem via email but most likely they will ask you to take your phone to a customer service center.
Sent from my PLK-L01 using XDA Labs

Try the Huawei firmware finder. You may find the complete and transitional packages if available.
http://forum.xda-developers.com/honor-7/general/huawei-firmware-finder-team-mt-t3469621

zinko_pt said:
Try the Huawei firmware finder. You may find the complete and transitional packages if available.
http://forum.xda-developers.com/honor-7/general/huawei-firmware-finder-team-mt-t3469621
Click to expand...
Click to collapse
Thank you. I found the version B396 and its change log says it can be rollbacked to emui 3.1. However it did not find (search for) rollback packages, hopefully it will work with the existing ones.

I unrooted my phone yesterday, installed B396 rom but none of the rollback packages work. Still "software install failed". Any more idea what could be done?
Who makes the rollback packages? They are only 18-19 kB.

What is the realistic size of a rollback file? What I found for PLK-AL10 are only 17-18kB (!), while on official honor site the rollback file made for the European (L01) version is 200-300 MB.

tgergo said:
What is the realistic size of a rollback file? What I found for PLK-AL10 are only 17-18kB (!), while on official honor site the rollback file made for the European (L01) version is 200-300 MB.
Click to expand...
Click to collapse
It should be anywhere from 100 to 300 MB. That is the size I usually observed.
But 18-19 KB is not possible coz it has to has multiple partitions inside it.
Sent from my PLK-L01 using XDA Labs

muradulislam said:
It should be anywhere from 100 to 300 MB. That is the size I usually observed.
But 18-19 KB is not possible coz it has to has multiple partitions inside it.
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
Hmmm... Then I don't understand why these files are so small...

DigiGoon said:
I don't think it'll work, as rollback has some other packages too which needs to be flashed unlike the common ones.
Sent from my PLK-L01 using Tapatalk
Click to expand...
Click to collapse
Hi friend,
The problem is still how to go back from Android 6 to 5 on PLK-AL10.
Another guy suggested me a simple solution: format (wipe) my phone and then any operating system can be flashed. Here is the way he did:
http://forum.xda-developers.com/showpost.php?p=69187959&postcount=13
Do you think it can work?
Thanks in advance.

Cant flash stock rom

Hi guys. M currently usimg Nephilim Rom V2. I was trying to flash b594 stock rom. Whenever i tried to install it with stock recovery it just says no update.app is found. Even though i extracted the update.zip file and put it in internal storage in dload folder. I cant even flash it through fastboot because it gives error even though i extracted the img files through Huawei extractor. Can anyone help!!!!

What kind of error fastboot method gives you? I always have went back to stock rom by flashing a rom in fastboot and never had problems with it

While flashing system.img i got error cant load system.img. even though it's in the same folder as adb is. There was also an error whule flashing recovery extracted from update.zip. i was flashing the recovery.img only and it says errot:too many links.

Try to re-download your adb and its related files

cheapster8 said:
Try to re-download your adb and its related files
Click to expand...
Click to collapse
Done that to same result...

So you want your original firmware correct ? If so , go here: http://consumer.huawei.com/nl-en/support/downloads/detail/index.htm?id=82749
Change region (if needed) find your phone and download that.
Once you downloaded it:
1. put it on your sd card
1.1 Since when you download the file, its gonna be in .zip or .rar format, you are gonna need to extract that and what you get out of that file (its gonna be a folder called dload) put that whole thing "dload" on to your sdcard. ( put in in a main folder of your sd card its called root folder, its where your main folders are like pictures, DCIM etc.)
2. turn off your phone leave it for a sec
3. then hold all 3 buttons ( power ,volume up , volume down) and it should start installing the thing.
Hope this helps.

Check this
https://forum.xda-developers.com/honor-4x/how-to/install-emui-4-1-4x-4c-g-play-g-play-t3515702
It's on honor 4x forum but it says it works on p8lite android 5.0 or higher.

Are you able to install stock recovery through adb? If you are, you can easily use Huawei's recovery to flash the stock firmware

cheapster8 said:
Are you able to install stock recovery through adb? If you are, you can easily use Huawei's recovery to flash the stock firmware
Click to expand...
Click to collapse
I guess u havent read my post coz i had clearly stated that i had tried flashing update through stock recovery but it says no update.app found.

keikari said:
Check this
https://forum.xda-developers.com/honor-4x/how-to/install-emui-4-1-4x-4c-g-play-g-play-t3515702
It's on honor 4x forum but it says it works on p8lite android 5.0 or higher.
Click to expand...
Click to collapse
Thanks man it was of some help. I now have b896.

hussam.aleem said:
I guess u havent read my post coz i had clearly stated that i had tried flashing update through stock recovery but it says no update.app found.
Click to expand...
Click to collapse
Ahh, sorry, I meant to say that you could try after flashing stock recovery to use EMUI updater to start the flashing.. anyway good that you got it to work

BAC-L21 stock firmware

https://drive.google.com/open?id=1tGuu5Y6Qfo5baHjEO_-tJ3irXAXIWa53

Please make detaliled guide how to flash

rameezyp007 said:
Please make detaliled guide how to flash
Click to expand...
Click to collapse
you probably have a newer version of software than the one i posted, thats just to help to fix bricked phones .. dont flash if your phone is fine

Hi my friend i have chinese bac-00al phone i couldt install google play apps,, bootloader is unlocked and installed twrp,, what you offer to me?? Thanks

turkishboy07 said:
Hi my friend i have chinese bac-00al phone i couldt install google play apps,, bootloader is unlocked and installed twrp,, what you offer to me?? Thanks
Click to expand...
Click to collapse
Install GMS Core first:
http://www.qt6.com/app/com.huawei.gmsinstaller
then install google play

turkishboy07 said:
Hi my friend i have chinese bac-00al phone i couldt install google play apps,, bootloader is unlocked and installed twrp,, what you offer to me?? Thanks
Click to expand...
Click to collapse
install gms core

bejan89 said:
install gms core
Click to expand...
Click to collapse
i install all every thing not result,, what is wrong with this phone?? how can l downgrade system? i think on this system impossible install GAPPS
---------- Post added at 08:03 PM ---------- Previous post was at 08:00 PM ----------
jangale_asrar said:
Install GMS Core first:
http://www.qt6.com/app/com.huawei.gmsinstaller
then install google play
Click to expand...
Click to collapse
this is too not resut

Hello and thank you very much for this useful download link
During the rooting method, my phone (nova 2 plus) became soft brick!
I tried to solve it!
I've done following steps but they didn't work (with your full rom - was linked):
1.
1.1. extract .zip file with winrar
1.2. extract update.app file using HuaweiUpdateExtractor
1.3. Put all extracted file to sd-card
1.4. power+volume up + volume down to update it but after 5 percent, appears "update fail"
2.
2.1. extract .zip file with winrar
2.2. extract update.app file using HuaweiUpdateExtractor
2.3. Flash the rom via fastboot (it completed successfully without any errors but phone reboot loop till huawei logo)
Now my questions:
1. The extracted file doesn't have "cust.img" is it OK or it should have it?
2. What can I do to solve my problem? (I've access fastboot and custom recovery)
Thanks for your patience and your answering.

Hi i have nova 2 plus bac-l21c185 and after wipe system my mobile never boots and always show error when trying to setup update.zip by twrp so please tell me if this rom will help me and able to setup correctly , if not ! So any idea will be useful .

engineer.sy said:
Hi i have nova 2 plus bac-l21c185 and after wipe system my mobile never boots and always show error when trying to setup update.zip by twrp so please tell me if this rom will help me and able to setup correctly , if not ! So any idea will be useful .
Click to expand...
Click to collapse
Well.. If u wipedbsystem thats mean there is no system files in your mobile...
There is 2bways tonsolve this
1.send it to repair it will cost you money.
2. The way i used.
A. Download a full firmware its in here someone shared it.
B.u need at least 8 giga sdcard and formated.
D. Move firmware to sdcard and reboot to huawei recovery.
E. Everything in your mobile will be wiped and restored to stuck
Hope your problem will be solved

hosbh said:
hello and thank you very much for this useful download link
during the rooting method, my phone (nova 2 plus) became soft brick!
I tried to solve it!
I've done following steps but they didn't work (with your full rom - was linked):
1.
1.1. Extract .zip file with winrar
1.2. Extract update.app file using huaweiupdateextractor
1.3. Put all extracted file to sd-card
1.4. Power+volume up + volume down to update it but after 5 percent, appears "update fail"
2.
2.1. Extract .zip file with winrar
2.2. Extract update.app file using huaweiupdateextractor
2.3. Flash the rom via fastboot (it completed successfully without any errors but phone reboot loop till huawei logo)
now my questions:
1. The extracted file doesn't have "cust.img" is it ok or it should have it?
2. What can i do to solve my problem? (i've access fastboot and custom recovery)
thanks for your patience and your answering.
Click to expand...
Click to collapse
dont extract update.app , just make dload folder in your sd card and put update.app in it .

Software Install Failed - WAS-LX1A SINGLE SIM 4GB

Hello,
Got a WAS-LX1A SINGLE SIM 4GB UK (with an updated WAS-LX1AC432B185 firmware).
Trying to go back to stock but all firmware (WAS-LX1AC432B179, WAS-LX1AC432B186, WAS-LX1AC432B187) which has been downloaded using Firmware Finder is failing via dload method: "Software Install Failed"
Any ideas or a link would to a firmware where I can start would be good,
Thanks

buddimanv said:
Hello,
Got a WAS-LX1A SINGLE SIM 4GB UK (with an updated WAS-LX1AC432B185 firmware).
Trying to go back to stock but all firmware (WAS-LX1AC432B179, WAS-LX1AC432B186, WAS-LX1AC432B187) which has been downloaded using Firmware Finder is failing via dload method: "Software Install Failed"
Any ideas or a link would to a firmware where I can start would be good,
Thanks
Click to expand...
Click to collapse
hi:
check this:
b182 =ds: 182, 184, 186 and so on....
b183= ss: 179, 183, 185, 187 so on...
-------------------------------------===== follow instructions of below if is bricked
now:
you need unlock bootloader
oeminfo ss
srom b183
twrp
sdcard
1- with a sdcard, create dload folder, then extract b183 and copy update.app + all was folders.
2- enable developer settings and enable oem unlock, poweroff and press vol-+power, then fastboot oem unlock code, then follow the screen(configs)
3- move twrp to c:/adb, with a cmd opened type cd c:/adb press enter, and type fatboot flash recovery recovery.img, finished type fastboot reboot plus pressing vol + till erecovery screen, shutdown and unplug, press vol+ power.
4- insert sdcard and make only a backup of your oeminfo, extract downloaded oem and copy/replace in twrp back folder, then restore in twrp. power off now only do 3buttons method

Thanks foliaje, I have tried WAS-LX1AC432B179 and its not working. The phone boots fine. Basically, I rooted and it tried to update via TWRP and failed. Now trying to restore to stock and getting this error. DO you have a link to the exact firmware that I can try - tried several of them now and its failing.

Ok, I managed to go back to stock by downloading via Firmware Finder. So, dload method via SD Card don't work with this phone or what? Would appreciate if someone can confirm?

buddimanv said:
Thanks foliaje, I have tried WAS-LX1AC432B179 and its not working. The phone boots fine. Basically, I rooted and it tried to update via TWRP and failed. Now trying to restore to stock and getting this error. DO you have a link to the exact firmware that I can try - tried several of them now and its failing.
Click to expand...
Click to collapse
links below and follow the guide of above, by the way otas doesnt work with twrp or/and root.
if your p10lite came with b183(confirm please) now you must have installed b185 or b187
https://drive.google.com/open?id=0B-k_1rnfFeEvTjkyLXNSVjVTSm8 oeminfo
https://forum.xda-developers.com/p10-lite/help/original-service-rom-huawei-p10-lite-t3688097 download servicerom b183

foliaje said:
links below and follow the guide of above, by the way otas doesnt work with twrp or/and root.
if your p10lite came with b183(confirm please) now you must have installed b185 or b187
https://drive.google.com/open?id=0B-k_1rnfFeEvTjkyLXNSVjVTSm8 oeminfo
https://forum.xda-developers.com/p10-lite/help/original-service-rom-huawei-p10-lite-t3688097 download servicerom b183
Click to expand...
Click to collapse
Hey foliaje, Thanks for your help, appreciate it.
Let me explain my issue: I have purchased my phone yesterday, it upgraded to 185 (I am assuming it was B183, didn't check) via OTA. Then I almost finished setting up the phone including ROOT but a b187 OTA appeared little bit later but failed because I had TWRP already installed. That's fine, no problem. So wanted to start again like I usually do - download the firmware, put on sd card and off you go......
But the problem with this phone is (and I had quite few Huawei one's including tablets) when I downloaded the full firmware, using the SD card dload method I get "Software Install Failed" but it seemed to have worked when I did it via Firmware Finder (I am on B187 now). So something not right - either something has changed or I need to do something else.
So what's the issue? The only think I can think of here is that you are saying that this phone require a 'service' firmware that does not do authentication or something? Right? I am downloading C432B183 from your link and will see what happens (bit slow).
I really would like to know now so I can get back to stock when I mess things up

OK...I followed as below:
Downloaded http://androidhost.ru/JS
(1) Copied main UPDATE.APP to dload folder
(2) Then renamed WAS-L01A_hw_eu\update_WAS-L01A_hw_eu.app to UPDATE.APP and copied to dload folder
Is above method correct, can we do it in one go?
Anyway, I think it has worked (had to do few reset) but the firmware version was showing WAS-LX1AC432B179 - is that correct? OTA upgraded to WAS-LX1AC432B185

buddimanv said:
WAS-LX1AC432B179 - is that correct
Click to expand...
Click to collapse
yeah it is correct, by the way in 2) is not necesary rename the update.app only copy all folders to sdcard

foliaje said:
yeah it is correct, by the way in 2) is not necesary rename the update.app only copy all folders to sdcard
Click to expand...
Click to collapse
Thanks dude, appreciate your help.
Now - any ideas why the firmware finder firmware's don't work on this phone via dload method?

buddimanv said:
Thanks dude, appreciate your help.
Now - any ideas why the firmware finder firmware's don't work on this phone via dload method?
Click to expand...
Click to collapse
In the UK and have exact same model. Filmware finder did not work for me also. The one in the link below did though! Its the first download you need. Copy the update.app and the folder 'L01A' to the 'dload' folder on your sd card. Does your phone boot? If so in the dialer type *#*#2846579#*#* and choose software upgrade then sd card update, it will then flash the filmware to pure stock.
https://forum.xda-developers.com/p10-lite/help/original-service-rom-huawei-p10-lite-t3688097

stonedpsycho said:
In the UK and have exact same model. Filmware finder did not work for me also. The one in the link below did though! Its the first download you need. Copy the update.app and the folder 'L01A' to the 'dload' folder on your sd card. Does your phone boot? If so in the dialer type *#*#2846579#*#* and choose software upgrade then sd card update, it will then flash the filmware to pure stock.
https://forum.xda-developers.com/p10-lite/help/original-service-rom-huawei-p10-lite-t3688097
Click to expand...
Click to collapse
Yes, its all good now. Bizarre - Huawei making things difficult now. Which TWRP are you using? Can the TWRP backup function works for you i.e. encryption disabled?