Ok, here is the (Cell Tower ID) location based Sleep Management software (earlier called phone switcher).
Saves your battery and works automatically without any manual action once configured
Application is not memory resident so it does not keep running in the background. Does not write anything to registry etc so can be uninstalled cleanly.
Application can run in one of the following modes
• Flight Mode: System automatically switches to flight mode when you are at predefined location (Say Home) based on the time you setup. So when you are at home, say from 10:00 PM to morning 6:00 AM your phone is really sleeping so no one can call your mobile. But if you are not home, then phone remains ON even at night.
• Run Command*: You can configure separate command line applications while ‘entering’ and ‘exiting’ your Sleep Location. So if you want to perform some other actions such as enabling the sounds/vibrations/forwarding etc you need to configure this feature
Run Command* Notes:
• Run command has two settings
o Entering sleep locationo Exiting sleep location.• Either browse for the command line application or copy paste the short cuts on the file and any command line parameters
• Some programs require you to ‘Wake Up’ the device to run, so if needed use that option
• ‘Wait for completion’ is only for advanced configurations. Most of the time it will hang the application. So use if you absolutely need it.
• You can test your run commands from the ‘Test’ menu.
Update history
Update 1.0.3
• Bug Fixed : If you were out of sleep location and returned to sleep location after 12 mid night(with in the sleep period) application would skip the current sleep.
Update 1.0.2
• Better user friendly UI added
• Now the application supports running an external application on command line.
Update 1.0.1
• Multiple locations on the schedule: If you want to set more than one location as you 'Sleep Location' you can do it now.
• Now if you were not at home at set time, system will keep polling based on the poll time you specify. So as soon as you reach home your phone will be switched off.
• If you turned on your phone manually after the rk-Sleep set it to flight mode, then your phone remains on till next scheduled sleep session
It is working on Hermes(WM6), and I have tested it on WM5 emulators. Will NOT work on WM2003.
Setup Instructions:
• You need to be at ‘Sleep Location’ to setup the application.
• In the ‘Locations’ tab, the current location box shows some numbers corresponding to your location.
• Click the button ‘Set as Sleep location’ to add current location as your sleep location. You can add multiple locations as sleep locations.
• On the ‘Schedules’ tab configure the ‘From’ and ‘To’ time fields. (You need to specify time in military time format)
• From the tab ‘Action’ choose if you want to use flight mode or Run Command (you need to set up your enter and exit actions)
• Finally click ‘Enabled’ and click the ‘Save’ menu
That’s all now you are set for ‘Sleep’. You can safely exit rk-Sleep.
The status tab would show you the last action attempt log
Note: This application requires Compact Framework 2.0
You need compact framework 2.0 installed inorder to run this application. The compact framework is already part of WM6, so if your device is WM6 skip this step. But most of the WM5 devices do not have this update. So you must download here and run the installation on your desktop (then active sync to update your device). Only after completing this step install the application.
If you like the application please show your support by replies and or donation on paypal
Download from here
Update 1.0.1
Multiple location on the schedule: If you want to set more than one location as you 'Sleep Location' you can do it now. On the sleep location box bring the context menu up, and choose 'Append to location' now add the new location to the list. You can add any number of sleep locations!
Now if you were not at home at set time, system will keep polling based on the poll time you specify. So as soon as you reach home your phone will be switched off.
If you turned on your phone manually after the rk-Sleep set it to flight mode, then your phone remains on till next scheduled sleep session
Hello,
With this program there would be still another interesting option which one to insert could.
It would thus not have to be possible the flight mode to activate automatically with enters a stored potition dependent on the time.
If someone works in a hospital, he needs to store only the position and every time it is in the hospital the flight mode switched on.
That one could not do also at others locates to use at those handys permitted or desired is I thinks there also of cemeteries.
MfG
S64
Great idea!
Is it perhaps possible to tirgger an application (or better: mortscript) upon entering a given location?
(I use mortscript to change call profiles, by copying sound files to overwrite the soundfiles I assigned as ringtones for various contacts. So if I set a "work" profile, the ringtones for different people are overwritten with a soundfile that contains silence, while others are made more discrete. It would be great to be able to automate this!)
Jörg
Instead of enabling flight mode, why not just disabling sound or enabling vibrate only mode?
Thanks
V J said:
Great idea!
Is it perhaps possible to tirgger an application (or better: mortscript) upon entering a given location?
Jörg
Click to expand...
Click to collapse
Jörg,
I do not know about mortscripts, but if i make application to run some other exe(say with some command line, Will the mortscript be able to change sound settings, call forwarding etc?
tytnguy said:
... but if i make application to run some other exe(say with some command line, Will the mortscript be able to change sound settings, call forwarding etc?
Click to expand...
Click to collapse
Yes, it should be able to do that. Also, maybe it is better to write it this way, and have your "flight mode application" written as a seperate program to be triggered by your tower-based software. In this way, others can contribute to write any other programs (as plugins) to yours. Anyway, AFAIK, Mortscript can do most of the job and or VJ (not the one above) has some nice collection that you can paired with yours.
Next you can write some scheduling software that will run an application whenever there is a 'Busy' (e.g. meeting) in your schedule (e.g. activate vibrate only mode). Then, with your tower-based software and your scheduling software, you can have a nested tower-schedule, while others can have a bluetooth-pairing based (e.g. execute software when near a paired bt device - change mode when inside your car), then you can stack all these together that will schedule your stuff based on tower-schedule-bt pairing.. WOW... too much software engineering makes you crazy.
Very nice software, but pls if You can, make a addon to change profile based on id, that would be nice. Something like: when i go to work (cell id: XX) phone change profile to vibrate/silent, but when i go back to home phone (cell id:YY) will change profile to loud.
Thx
drivex said:
Very nice software, but pls if You can, make a addon to change profile based on id, that would be nice. Something like: when i go to work (cell id: XX) phone change profile to vibrate/silent, but when i go back to home phone (cell id:YY) will change profile to loud.
Thx
Click to expand...
Click to collapse
Yes I know that is where this software will lead to(Hopefully)
But to support multiple locations the progrma gets too complex. But I know that will be a perfect applicaton!
@VJ: I think using mortscript with the tool would defeat the purpose of the tool, because with mortscript you don't need the tool (The current tower, or BTS as I should refer to it to, is available in registry I think)
@tytnguy: kudos to you, great streak with so many useful programs.
Update 1.0.2
• Better user friendly UI added
• Now the application supports running an external application on command line.
• You can configure separate command line application while ‘entering’ and ‘exiting’ your Sleep Location
More info on the main thread.
Hi,
Great Application that seems to work perfectly. I can see myself using it to help save on battery life.. and also when I enter work where I cant have the phone on.
Don't suppose you'd share how you get the tower information? I tried a method posted on the forums but it doesn't work for me and only works when the data/voice is not connected.
I tried to implement this into an application I use as a backup to give a rough location if GPS location isnt available but never managed to read a sensible string for the towers ID.
(If you'd rather not say I understand fully)
Thanks,
sam
Great!, make a profile changer based on location also, that will be awesome
Update 1.0.3
• Bug Fixed : If you were out of sleep location and returned to sleep location after 12 mid night(with in the sleep period) application would skip the current sleep.
I LOVE it, actually I've been looking for something like this every since I switched from my Nokia communicator 9000
2 suggestions
1- would it be possible to "rename" locations to something more intuitive?
2- I'd like to be able to trigger an alarm on entering a location that way if u are on a train your phone can wake u up when you reach your destination
thanks
ArcticCat said:
I LOVE it, actually I've been looking for something like this every since I switched from my Nokia communicator 9000
2 suggestions
1- would it be possible to "rename" locations to something more intuitive?
2- I'd like to be able to trigger an alarm on entering a location that way if u are on a train your phone can wake u up when you reach your destination
thanks
Click to expand...
Click to collapse
Thanks for the reply,
But right now the application just supports one location, So you are not able to do multiple locations. If you use the slot of managing only alarms its fine. But if you want to do alarm and also in some other location some other action you can not.
But i have that featrue in my list though
To do it, right now you have to set to 'Run Mode' and in the run mode specify any media file, On entering your location the media will be played.
Hi tytnguy,
found a "mini minor" bug in latest version 1.0.3...
If you just append a new location and change nothin other
the Save function don't gets active and so if you just press
OK the new location won't saved and neither the window don't
pop up asking wether you want to save or not.
So you have always to tap any other function on/off additionally
to be able to save Hope you understand this
Next step in version profiles would be great
Best regards,
Olioaglio
Olioaglio said:
Hi tytnguy,
If you just append a new location and change nothin other
the Save function don't gets active and so if you just press
OK the new location won't saved and neither the window don't
pop up asking wether you want to save or not.
So you have always to tap any other function on/off additionally
to be able to save Hope you understand this
Olioaglio
Click to expand...
Click to collapse
Understood, For now to enable the save button you can Uncheck and Check the 'Enable' checkbox as you suggested
Olioaglio said:
Next step in version profiles would be great
Olioaglio
Click to expand...
Click to collapse
I know others also requested it, but what type of 'Profile' you are asking for? Is it changes the sound profiles to change between different sound modes? Or change lot of options such as sound+wifi+bluetooth+backlight+....etc?
tytnguy said:
Understood, For now to enable the save button you can Uncheck and Check the 'Enable' checkbox as you suggested
I know others also requested it, but what type of 'Profile' you are asking for? Is it changes the sound profiles to change between different sound modes? Or change lot of options such as sound+wifi+bluetooth+backlight+....etc?
Click to expand...
Click to collapse
I would like location based profiles with different schedule times,
so that you could e.g. install a "Home location" with flightmode from
11pm to 8am (like it is now) and a second profile maybe for work
with flightmode from 12am to 1pm. Or maybe a profile with 24/7 flightmode
on a certain location. Lets say you work in a hospital and while you
enter the lcation phone would turn to flightmode. If you leave phone would
switch on again.
The wifi+bluetooth+beam etc options would be also a geat thing to include
as an option with checkboxes, so one could save even more battery at night
and in sleep location would not be any electro smog.
But for now I can live very good with the program as the main function
works like it should now. One little thing: Found out, that if you reset the
phone within schedule time and phone was turned on (manually) rk-sleep
wont turn it off again. But this may be wanted as not to nag you if you
decide to manually turn on.
Olioaglio
What is the Net Compact framework that it needs! I'm running WM5, and it doesn't work on my device and I supose it has got something to do with what I mencioned earlier. Thanks.
anyone know how to do this? I live in an area that isnt in the weather database. when I am home I get to see the weather as it gets it from My Location, but when I am not there, I cant find any way to save the current My Location in the main list.
Anyone got any ideas on how to do this? Should be a 'Menu/ Add Current Location' Option
Search weather database editor and you should find an app that lets you edit and add new cities as you like.
Mektah said:
Search weather database editor and you should find an app that lets you edit and add new cities as you like.
Click to expand...
Click to collapse
There is a special version of weather database editor for the TP2 ( i think it"s the 2.2) You can give it a try.
But some reports says it doesn't work for all TP2 users. You can corrupt your database, so you must backup your database before.
i know about the editing of the weather database, what I am looking for is a simple add on to the menu that allows me to ADD wherever I currently am.
Me TOO!
I am looking for the same thing. How to add 'where I'm at right now' to the list of places I get weather for. It's not in the database. Where is this 2.2 weather database editor? Is it in the registry?
You can add just about any place you want to the weather database using the editor found at http://forum.xda-developers.com/showthread.php?t=546141.
It won't add your current location automatically, but it will let you do so manually as long as you know where you are.
accuweathercode
How to I find out the Accuweathercode for the city I want to add?
Go to settings and enable the AGPS service.
Enable the Location Service Settings
Enable Location Service
After that, go to the home screen and tap/click on your clock and select "my location".
This will enable the weather to be on "my location" and it will update regularly based on the intervals that you determine.
Hope it helps.
marduk79 said:
Go to settings and enable the AGPS service.
Enable the Location Service Settings
Enable Location Service
After that, go to the home screen and tap/click on your clock and select "my location".
This will enable the weather to be on "my location" and it will update regularly based on the intervals that you determine.
Hope it helps.
Click to expand...
Click to collapse
How or where to " Enable Location Service" , is it the same as "Enable the Location Service Settings" ? I cant find "My location" in the cities list.
Thanks for your reply.
vjajrj said:
How or where to " Enable Location Service" , is it the same as "Enable the Location Service Settings" ? I cant find "My location" in the cities list.
Thanks for your reply.
Click to expand...
Click to collapse
ok, I am lost... I loaded the file at the link above and installed it but it claims I need a newer version of microsoft.net compact framework...
the above link will let me add my city to the 'stock" weather tab on the tilt 2 (att) correct?
babarber said:
ok, I am lost... I loaded the file at the link above and installed it but it claims I need a newer version of microsoft.net compact framework...
the above link will let me add my city to the 'stock" weather tab on the tilt 2 (att) correct?
Click to expand...
Click to collapse
have you tried installing .NET Compact Framework 3.5? check this out.
check the first forum in applications and themes category.
the link in post #6 will enable you to add your city. But I am looking for some settings that will change the city automatically based on your location. Found that it wont work in CDMA but does work in Tilt2.
Thanks, I got it to work.
Hey Guys,
I'm running MightyROM6 (and loving it, thanks Mike) but as soon as I flashed it, I was missing the weather tab. I'm always looking at the weather for work, so I started searching for a weather tab.
I found Showaco TitaniumWeather 4.2 and read about them and installed. I read the reports from many people that they get nothing but the red icons....I do too.
Here is the process that I've done:
Download Cab.
Disable 'Windows Default' in the items tab of the system settings.
Install Cab.
Soft Reset.
Enable Windows Default.
It wasnt working so I did some more searching and found out about the mortscript deal, so I put the new mortscript file in the program files/titanium weather folder and it worked...sort of
Now I can have my current weather, and my weekly forecast but I still have the red X icons. Also, I dont know how to get the Radar to work. Additionally, when I click the widget, there is an error message.
I'm going to go through the whole process and repost all of the error messages I'm getting...
Thanks for reviewing this.
Mitch
message 1
immediately upon soft reset: ".mscr and .mortrun extensions registered. Please run any .mscr/.mortrun file or read the manual."
*my response to this is to overwrite the .mscr file called TitaniumWeather.mscr, then soft reset again.
**i still have the message
message 2
"setup needed" this is the first thing I see in the tab.
*my response is to click menu>enter my zip for the city, enable auto updates, choose my icons from the icon pack i downloaded, click save/exit>full update
and gull durn it I have my icons after like eight times of trying this...
BUT
message 3 (when selecting the radar)
"An error occurred on sub_main_nextimage_click. Value does not fall within the expected range. Continue? (I click yes)
*Now I'm going to press and hold on the radar 'map' (which is just a grey screen) until I get to edit the url. WHAT URL DO I USE! weird...
message 4
on clicking zoom out, a dialogue box flashed like eight times and then: "An error occurred on sub_main_zoomcontrol. StackOverflowException Continue?" (I'm going to assume that this is because I tried to zoom out of a map that doesnt exist)
message 5
on clicking the msn weather widget: "Error opening the shortcut or locating the target filename." I'm assuming this is because I need to enter another URL somewhere?
Hi there,
I Have made a small gps logger application for android, hope you like it.
Features:-
Get Latitude, longitude and altitude.
Change there format to Degree, Minutes, or Seconds.
Stop and Start GPS Service.
Add the location with date and name to a list.
Save the list to user defined file.
see the current location in map in both satellite view and map view.
ability to hide any of the parameters.
Get distance between two location form the list.
I have made it for my own use during ecological survey, but hope you might find it useful, so please if possible tell me what else should i add to it.
And yes the back key wont exit the application, implemented it so that accidentally we I don't exit it, Exit the application through exit option in menu.
Download it from my website:-
ww.planetngp.com/p/download.html
Click the GeoInfo Link.
Thanks for sharing. I was wondering if there was a way to log the accuracy of the GPS?
What I mean is that although I don't have any use for such an app I am always wondering how well a new Rom/Modem performs. I normally just use GPS test in the car and look at it while I am driving (still safely ).
If this feature is already in there just ignore my comment (and thank you for the app).
K.
I looked around and couldn't find a detailed guide on how to do this so I figured it out and decided to share..
Prerequisites:
Working Webtop
XFCE Desktop
or
AWN Manager
aLogcat > https://market.android.com/details?id=org.jtb.alogcat&hl=en
This is a simple proccess which will require you to use aLogcat to get the activity name of the item you want to launch and then simply make a new shortcut item on your launcher.
Getting our activity name:
Launch aLogcat
Hit the menu button on your phone
Select Filter
type "activityMan"
leave the option for regular expression unchecked
--Now that your application is logging and filtered you will see a window with alot of text. This is where we will be searching.
hit your menu button again
Select Clear
Now hit your home button and navigate to the icon you would like to be able to directly launch from your webtop and click it.
Go back to aLogcat
Hit the menu button on your phone.
Choose the pause option from ALogcat
***Now were going to search for the string we need to tell activity manager which activity to launch**
Look through your log for something that looks like this: "com.p1.chompsms/.activities.ConversationList" (this one will launch ChompSMS)
In my case the entire line looked like this: /ActivityManager( 1700): Starting: Intent { act=android.intent.action.MAIN cat=[android.intent.category.LAUNCHER] flg=0x10200000 cmp=com.p1.chompsms/.activities.MainActivity bnds=[5,343][115,483] } from pid 3088
copy the string that comes after "cmp=" (bolded above)
Creating the shortcut
Depending on which interface you are using this will differ slightly:
For AWN Manager
Open AWN Manager
Choose Launchers
Click Add
Set your name description and Icon
For Command add the following: androidlauncher --action "android.intent.action.MAIN" --cmp "<TEXT THAT YOU COPIED ABOVE>"
For XFCE
Right click on the task bar.
Choose "Customize Panels"
Next to where it says Panel 1 hit the + button to create a new Panel.
**Select the new panel and edit its options**
Set it to Normal Width | Fixed position | And then select the position where you would like to see it on your screen.
Change icon size to suit your taste. (Tip, if you would like to use the icon for the application an easy way to get it is to Google "AppName icon" and then use Google's image search. Choose an icon that's somewhere near 96*96 (you can sort by size), save it and select it from the menu.
Now that we have created a shortcut / panel
Right click the new panel / Icon
Add new Items
Launcher
Set your name description and Icon
For Command add the following: androidlauncher --action "android.intent.action.MAIN" --cmp "<TEXT THAT YOU COPIED ABOVE>"
you now have a working shortcut that will pull up the app or activity in "Mobile view" on your webtop!
Yay.
If anyone knows any more tricks with this please let me know! I have been wondering if it is possible to tell the app to come up in full screen.
** if this helped you please remember to hit the thanks button (help a guy boost his newb cred) **
Thanks for this. You probably saved me a lot of time because I was going to try to figure out how to do this.
Have all the apps on the phone worked without problems?
Also, does the Entertainment App work thru XFCE Desktop without the Awn dock?
blingmaster said:
Thanks for this. You probably saved me a lot of time because I was going to try to figure out how to do this.
Have all the apps on the phone worked without problems?
Also, does the Entertainment App work thru XFCE Desktop without the Awn dock?
Click to expand...
Click to collapse
I haven't tested enough to say whether everything works or not. I also haven't eve used the entertainment center . This was one of the primary reasons why I was frustrated with the original webtop. They gave use the ability to launch only a couple of their apps rather than just creating a mechanism for us to select apps for shortcuts. This is something I may look into developing in the future.
Awesome work! I was just going to look at this today after looking at XFCE menu editing yesterday and BAM you already did it!
Too bad I broke my webtop somehow and had to start over this morning. I'm getting so practiced I could do it in my sleep!
Upon further thinking, you could probably just create a .desktop file like the other ones have and then it would automagically get put in the XFCE menu. Then it could be scripted and added into webtopscripts or something.
stewartsoda said:
Awesome work! I was just going to look at this today after looking at XFCE menu editing yesterday and BAM you already did it!
Too bad I broke my webtop somehow and had to start over this morning. I'm getting so practiced I could do it in my sleep!
Upon further thinking, you could probably just create a .desktop file like the other ones have and then it would automagically get put in the XFCE menu. Then it could be scripted and added into webtopscripts or something.
Click to expand...
Click to collapse
Last night was my first night with a working webtop, being able to quickly launch ChompSMS , or pandora on my mobile view was top priority for me. Now that I have that mostly handled I guess I need to move on to learning XFCE tweaks. I'm really glad this helped, I was really surprised that this wasn't already hashed out and detailed, but I was glad to finally be able to contribute something over here!
Hi nineismine,
Mind to provide me a little bit of extra info on the below? Thank you in advance.
(1) How to "remove" the pre-installed short-cut apps in mobile view? For example the "Messaging". I rather prefer to replace this with the "Text Messaging" by following your tutorial.
(2) How to "remove" the pre-installed short-cut apps in webtop view? For example, mine Atrix is Asia Retail version and it build-in with the "Motorola Video" app-tray which I have no idea how to "remove" it.
I herewith attached the screenshot on my stock webtop for your reference (the stock webtop do support screenshot feature and I learn this from this link: http://forum.xda-developers.com/showpost.php?p=17093665&postcount=3)
Edited:
I found my solution by installing the webtop2SD. My issue solved. Thanks.