I'm just starting to learn about different network connections and I'm trying to find out why netstat would show the IP address 0.0.0.0 listening to my external IP address on a specific port and also listening to 127.0.0.1 and my ipv6 address? I've tried googling it but I'm just not understanding...
0.0.0.0 is all IPs bound on any interface. 127.0.0.1 is loopback.
Related
Hey,
Are there any cool proxies, ports or node-IPs I should know about when it comes to T-Mobile GPRS?
A number of people seem to enjoy various degrees of "free" datacom though nobody has posted the IP environment that actually works. below is what I get, and it royally does not work.
Could we discuss what IPs are received, if tracert seem to work and other useful bits about GPRS?
By simply connecting and running vxUtil http://www.cam.com/vxutil_pers.html, your IP environment can be explored. Global DNS can be found here http://www.zoneedit.com/lookup.html
Phone settings
Modem: Cellular Line (GPRS)
Access point name: wap.voicestream.com
User name: n/a
Password: n/a
Domain: n/a
Use server-assigned IP address
No software compression
No IP header compression
Use server-assign addresses for DNS and WINS
Connects to the Internet, no proxy
Connection Behavior
Connects: 2s "Connecting…" 12s Connected
Disconnects: 0 seconds.
IP environment
IP: 10.173.148.198 (not a public IP)
Subnet: 255.0.0.0
Default gateway: 192.168.111.111 (not accessible address due to subnet)
Primary DNS: 66.94.9.120 (T-Mobile USA - does not respond to ping)
Secondary DNS: 66.94.25.120 (T-Mobile USA - does not respond to ping)
Primary WINS: n/a
Secondary WINS: n/a
DHCP Server: n/a
Service Response
Ping does not work.
DNS works.
HTTP does not work (Google)
I tried various WAP and proxy settings but it's kind of dead...
-Le geek
internet2.voicestream.com for gprs
internet3.voi..... for VPN
I believe you have to pay for all of them although
Hi,
When I connect my O2 XDA Mini S (Wizard) via USB to my desktop my internet connection stops working. Nothing actually "drops" but all connections simply timeout. 2 minutes after removing the XDA it all starts working again.
When I do a "route print" , the routing table is changed. This is added:
Network Destination Netmask Gateway Interface Metric
169.254.2.0 255.255.255.0 169.254.2.2 169.254.2.2 30
169.254.2.2 255.255.255.255 127.0.0.1 127.0.0.1 30
169.254.255.255 255.255.255.255 169.254.2.2 169.254.2.2 30
but more worringly, these are modified/added to:
Network Destination Netmask Gateway Interface Metric
224.0.0.0 240.0.0.0 169.254.2.2 169.254.2.2 30
255.255.255.255 255.255.255.255 169.254.2.2 169.254.2.2 1
Even thought the "default" gateway remains the same (my ethernet card).
This is the table after connecting:
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 10.92.14.129 10.92.14.167 20
10.92.14.128 255.255.255.128 10.92.14.167 10.92.14.167 20
10.92.14.167 255.255.255.255 127.0.0.1 127.0.0.1 20
10.255.255.255 255.255.255.255 10.92.14.167 10.92.14.167 20
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
169.254.2.0 255.255.255.0 169.254.2.2 169.254.2.2 30
169.254.2.2 255.255.255.255 127.0.0.1 127.0.0.1 30
169.254.255.255 255.255.255.255 169.254.2.2 169.254.2.2 30
224.0.0.0 240.0.0.0 10.92.14.167 10.92.14.167 20
224.0.0.0 240.0.0.0 169.254.2.2 169.254.2.2 30
255.255.255.255 255.255.255.255 10.92.14.167 10.92.14.167 1
255.255.255.255 255.255.255.255 169.254.2.2 169.254.2.2 1
Default Gateway: 10.92.14.129
I've got Activesync 4.1.0
As this been a problem to anyone else?
Thanks,
sky
I have ActiveSync 4.2 - and have not had any problems at all...
Might be worth upgrading and trying again?
Ok, I found a solution.
It's not activesync, and it may affect other PDA's, connections etc.
The order in which the networks are used is in the Advanced Settings under Network Connections. I just moved the "Local Area Connection" to the top of the list, above "Local Area Connection 4". Previously it was the other way around.
Here's a screenshot attached.
Thanks for the help!
sky
Maybe very basic, but have you checked your activesync connection settings?
Just rightclick on the green icon and select "connection settings"
Then choose internet at "This computer is connected to:"
But you can only choose that if you have a direct (=NAT) connection.
If you use a proxy, you need to choose Work and enter your proxysettings in your lansettings on your device.
thank you rohn, but i've fixed this by doing what I described on my previous post.
Cheers!
sky
I hope some one can help, I have searched the forum and tried all the settings that have been posted
The settings on my Xda Exec are as follows
Under My ISP I have
Access point name payandgo.o2.co.uk
User name payandgo
Password password
DNS 193.113.200
Alt DNS 193.113.200
Under My Work Network I have
Access point name payandgo.o2.co.uk
User name payandgo
password password
Under MMS configuration I have
Server name
O2UK
Gateway 193.113.200.195
Port number 9201
Server address http://mmsc.mms.o2.co.uk:8002
However when I try and connect to the internet, I get a connection but when I try and visit any websites I get the following error 'The page cannot be displayed or downloaded because the connection was lost. Check the connection and try later'
Can anyone help? as I seem to be banging my head against a wall !
Thanks in advance
there's an actual cab file of the settings on the forum somewhere if you do a search
I'm trying to configure my blackstone for mobile internet use on the 2 degrees network in New Zealand. The 2 degrees website gives the following config info:
WAP Gateway Settings
WAP gateway IP: 118.148.1.118
WAP Gateway Port (WAP2): 8080
WAP Gateway Port (WAP1): 9201
Homepage: http://m.2degreesmobile.co.nz/
APN: 2degrees
MMS Settings
WAP Gateway Port (WAP2): 8080
WAP Gateway Port (WAP1): 9201
WAP gateway IP: 118.148.1.118
Homepage: http://mms.2degreesmobile.net.nz:48090
APN: mms
Internet Settings
Homepage: http://m.2degreesmobile.co.nz/
APN: internet
Going through Start > Settings > Connections > Connections > Add
I entered http://m.2degreesmobile.co.nz/ into the Access Point Name field and proceeded to completion (leaving the Username and Password fields empty).
Unfortunately when trying to connect to the internet I get a 'can not connect for an unknown reason' error.
I can't see anywhere to configure WAP or MMS but I don't believe it's this that is preventing me from access the internet.
If anyone has any suggestions on how to get it working................
oh very useful thank you very much
i used 2degree too with HTC Desire
try that
I'm using two degrees in nz and the olly settings are:
in connection type use "cellular line 3G"
for the access point "internet"
QUOTE=Karearea;4795184]I'm trying to configure my blackstone for mobile internet use on the 2 degrees network in New Zealand. The 2 degrees website gives the following config info:
WAP Gateway Settings
WAP gateway IP: 1i18.148.1.118
WAP Gateway Port (WAP2): 8080
WAP Gateway Port (WAP1): 9201
Homepage: http://m.2degreesmobile.co.nz/
APN: 2degrees
MMS Settings
WAP Gateway Port (WAP2): 8080
WAP Gateway Port (WAP1): 9201
WAP gateway IP: 118.148.1.118
Homepage: http://mms.2degreesmobile.net.nz:48090
APN: mms
Internet Settings
Homepage: http://m.2degreesmobile.co.nz/
APN: internet
Going through Start > Settings > Connections > Connections > Add
I entered http://m.2degreesmobile.co.nz/ into the Access Point Name field and proceeded to completion (leaving the Username and Password fields empty).
Unfortunately when trying to connect to the internet I get a 'can not connect for an unknown reason' error.
I can't see anywhere to configure WAP or MMS but I don't believe it's this that is preventing me from access the internet.
If anyone has any suggestions on how to get it working................[/QUOTE]
no doubt you have solved this problem already but for anyone who hasn't, 2degrees website is very helpful and there is a section were you write in your phone number and some other details and they send you a bunch of txt msgs containing updates and settings changes that will fix the 3g problems.
I need help understanding why my SSH tunnel connection isn't hiding my public IP address no matter which SSH tunneling provider I use. Psiphon Pro VPN app cloaks my IP just fine though.
Moto G4+ Android Nougat 7.0 (rooted), Google Chrome app, SSH Tunnel 1.5.6 app
I made successful SSH connections using accounts with the following free SSH providers: www.sshagan.net, www.fastssh.com, www.freevpn.us
Example setup:
Host IP: x-usa1.sshservers.us
OpenSSH port: 22
Username: myusername-freevpn.us
Password: ********
Use SOCKS proxy: enabled
Local Port: 1984
Global Proxy: enabled
Enable DNS Proxy: enabled/disabled (both worked with same results)
When I use the IP address site at www.expressvpn.com/what-is-my-ip (or any other such site), it always displays the same public IP with or without SSH tunneling. Can someone advise me as to what I'm doing wrong? Any help appreciated. Thanks.
I was able to cloak my IP by using the ProxyDroid app in conjunction with the SSH Tunnel app as follows:
Configured and connected SSH Tunnel as above
Configured ProxyDroid as follows:
- Host: 127.0.0.1
- Port: 1984 (same local port used with SSH Tunnel)
- Proxy Type: SOCKS5
- Global Proxy: enabled
Connected ProxyDroid
My IP address at https://whoer.net was now different from my public IP.