Database Users

o2 uk internet settings after upgrade to t-mobile wm2003

hello xda people,
i ve been browsing the forum for the past three hours looking for the o2 internet settings without success.
i now have the new t mobile rom wm 2003 cooked in lumpistefan's kitchen
rom 4.01.16 ENG
but i am with o2 uk and apparently in o2 website there is no word about connections settings( :shock: weird...).
can anyone post them pls?
thanks

if your previous rom contained the settings after a hard reset, chances are, theres a cabfile there in the ExtRom which has it. my xda had asia settings which ran an app "autoconfig.exe" which in turn, ran specific cabfiles. just check the autoconfig.txt to see what you need (since you mentioned you came from an O2).
if you DONT have it, then you could also use wince cabmanager & check out the registry settings of the cabs you think are what you need 2 get an idea what they install (usually in the registry settings)

the access point is the only think i've seen differ when it comes to grps settings in general and even those are most often just internet
and possible the login and password even
though they too are often left blank since the grps server know
which user who are connecting because it can see the number

someone has emaild em to me so i thought it might help some of you.so these are the settings for 02 xda uk:
Start > Settings > Connections > Connections >
Under My ISP tap Manage Existing Connections
Tap Edit
The Select a Modem drop-down box should be set to Cellular Line (GPRS)
Tap Next
Access Point Name: mobile.o2.co.uk
Tap Next
Username: web
Password: web
Domain: leave blank
Tap Advanced
On the TCP/IP tab, only Use Server-assigned IP Address should be selected
Tap the Servers tab
Use Specific Server Addresses should be selected
DNS: 193.113.200.200
Alt DNS: 193.113.200.201
Tap OK
Tap Finish
O2 GPRS settings (WAP):
Note: Different settings for contract and PAYG (Pay as you go)
Homepage: http://wap.o2.co.uk/
APN address (contract): wap.o2.co.uk
APN address (PAYG): payandgo.o2.co.uk
Gateway (IP) address : 193.113.200.195
Username : o2wap (contract) / payandgo (PAYG)
Password: password
Session type: Continuous / permanent
Authentication: Normal
Security: Off
Port number: 9201
O2 GPRS settings (Email/Web):
Homepage: http://pda.o2.co.uk/
APN address: mobile.o2.co.uk
Username: mobileweb
Password: password
Session type: Continuous / permanent
Authentication: Normal
Security: Off
Email servers (POP): mail.o2.co.uk
Email servers (SMTP): smtp.o2.co.uk
DNS Servers: 193.113.200.200 and 193.113.200.201
Note: The "Mobile Web" service must be enabled for these settings to work.
Contact O2 Customer Services to have this enabled
and there is the address i could not find in the o2 web site:
http://www.o2.co.uk/productsservices/ota2/select/0,,184,00.html
good surfing to all of you... :wink:

NEW ROM AND paug O2 GPRS SETTINGS

ok ive just installed the new imate rom and finaly decided it was time to get my gprs settings set up but im haveing a bit of a problem.
this is what im doing, i am trying to use the o2 payg gprs data settings
im making a new connection
"enter a name for the connection"
o2 gprs
"select a modem"
cellular libe (gprs,3g)
clicked next
"access point name" 02 gprs
clicked next
"uaer name" payandgo
"password" password
now for domain ive been told on 3 calls to use payandgo.02.co.uk
this is where my problem is because the box only allowes me to type payandgo.02.co.
as for the advanced tab i was told to leave them as use server assigned ip address on both tabs
i havent gotten any further than this and if i leave it as payandgo.02.co. i cant get it to connect to the gprs network at all
o2 said they cant help me as its not there software all they will do is give me the settings .... bahhhh stupid customer support lol
well any help is apreciated guys ........ thyis board has been a life saver since i got the phone

your access point name doesn't look right. Most probably that's where payandgo.02.co.uk needs to go.

well according to
http://www.filesaveas.com/gprs.html
its this
Code:
O2 GPRS settings (Email/Web):
Homepage: http://pda.o2.co.uk/
APN address: mobile.o2.co.uk
Username: mobileweb
Password: password
Session type: Continuous / permanent
Authentication: Normal
Security: Off
HTTP Proxy: 193.113.200.195
Port number: 8080
Email servers (POP): mail.o2.co.uk
Email servers (SMTP): smtp.o2.co.uk
DNS Servers: 193.113.200.200 and 193.113.200.201
and that looks decidedly different to what you have been told. According to the site there is no difference between PAYG and Contact like there is on Vodafone
Ive used the settings from this page to setup my gprs so i dont doubt the info is correct, but cannot confirm the o2 settings, im on Voda
try them, worth a shot

ive tryed with those settings and it just says that it cant connect. is any body else useing o2 payg uk gprs on there phone wo could tell me what they have
chears guys

Try this :-
O2 GPRS settings (WAP):
Note: Different settings for contract and PAYG (Pay as you go)
Homepage: http://wap.o2.co.uk/
APN address (contract): wap.o2.co.uk
APN address (PAYG): payandgo.o2.co.uk
Gateway (IP) address : 193.113.200.195
Username : o2wap (contract) / payandgo (PAYG)
Password: password
Session type: Continuous / permanent
Authentication: Normal
Security: Off
Port number: 9201
Its from : http://www.filesaveas.com/gprs.html
You will also find MMS settings etc there as well.
Also do a search in this forum, somewhere there is a cab file to download that will set it all up for you correctly.

why did you install the imate rom BTW?

i updated to the imate rom as i had problems with the o2 rom,
still havent got it to work yet. i mite take it in to an o2 store and see if they can set it up for me ... the people on the o2 help desk are idiots lol

Multi Media Messages O2 EXEC

I have set my exec phone up to non o2 settings (by taking the battery out before it started to load the o2 settings after a hard reset)I have everything working mobile internet etc apart from mms, I have set up the mms settings as per the o2 website but when I take a picture and try to send it mms the phone freezes and I have to do a soft reset, I am not that bothered about mms but I was wondering does it not work because the o2 settings are not on the phone ??
any way around this , I do send the odd one if it cant be got to work id rather have a fast phone than a sluggish one....

mancuk29 said:
I have set my exec phone up to non o2 settings (by taking the battery out before it started to load the o2 settings after a hard reset)I have everything working mobile internet etc apart from mms, I have set up the mms settings as per the o2 website but when I take a picture and try to send it mms the phone freezes and I have to do a soft reset, I am not that bothered about mms but I was wondering does it not work because the o2 settings are not on the phone ??
any way around this , I do send the odd one if it cant be got to work id rather have a fast phone than a sluggish one....
Click to expand...
Click to collapse
Did you set up the settings for My Work Network as well as the O2 mobile internet? Also, have you checked the IP addresses and gateways carefully?
The appropriate settings for MMS are:
MMS:
Server Name O2UK
Gateway: 193.113.200.195
Port 9201
Address http://mmsc.mms.o2.co.uk:8002
Via My Work Network
Size 100k
Wap 1.2
My Work Network settings:
O2 Active
Cellular GPRS, 3G
APN: wap.o2.co.uk
user o2wap
p/w: password
Advanced: Server Assigned IP address and DNS
For completeness, the O2UK 3G settings are:
Connection Name: O2 Internet
Access Point: mobile.o2.co.uk
Username: faster
Password: password
DNS: 193.113.200.200
Alternative DNS: 193.113.200.201

apd said:
Did you set up the settings for My Work Network as well as the O2 mobile internet? Also, have you checked the IP addresses and gateways carefully?
The appropriate settings for MMS are:
MMS:
Server Name O2UK
Gateway: 193.113.200.195
Port 9201
Address http://mmsc.mms.o2.co.uk:8002
Via My Work Network
Size 100k
Wap 1.2
My Work Network settings:
O2 Active
Cellular GPRS, 3G
APN: wap.o2.co.uk
user o2wap
p/w: password
Advanced: Server Assigned IP address and DNS
For completeness, the O2UK 3G settings are:
Connection Name: O2 Internet
Access Point: mobile.o2.co.uk
Username: faster
Password: password
DNS: 193.113.200.200
Alternative DNS: 193.113.200.201
Click to expand...
Click to collapse
I have the MMS and My Work Network settings set up correctly , where do I do the o2uk 3g settings ?? - I have no o2 rubbish on my phone and i pulled the battery after a hard reset before the o2 stuff loaded so I have set the internet settings from this forum , I presume the o2 internet stuff goes in the my isp settings ??
I have blackberry unlimited data on my exec I presume that the above which is different from the settings I found elsewhere on this forum
CONNECTION Mobile Web
MODEM CELLULAR LINE (GPRS 3G)
ACCESS POINT mobile.o2.co.uk
USER NAME O2web
PASSWORD password
then the same dns and alt dns ??

apd said:
Did you set up the settings for My Work Network as well as the O2 mobile internet? Also, have you checked the IP addresses and gateways carefully?
The appropriate settings for MMS are:
MMS:
Server Name O2UK
Gateway: 193.113.200.195
Port 9201
Address http://mmsc.mms.o2.co.uk:8002
Via My Work Network
Size 100k
Wap 1.2
My Work Network settings:
O2 Active
Cellular GPRS, 3G
APN: wap.o2.co.uk
user o2wap
p/w: password
Advanced: Server Assigned IP address and DNS
For completeness, the O2UK 3G settings are:
Connection Name: O2 Internet
Access Point: mobile.o2.co.uk
Username: faster
Password: password
DNS: 193.113.200.200
Alternative DNS: 193.113.200.201
Click to expand...
Click to collapse
Many thanks, I haven't been able to get MMS working & I had O2 give me the settings.

only a suggestion but call o2 and find out if your still provisioned for gprs mobile web etc, as sometimes the settings just dissapear from there system for your account, this happened to me a couple of times .
also have a look at http://forum.xda-developers.com/showthread.php?p=1200467#post1200467
might help.

vodafone v1605 wap password help

Hi everyone
having a nightmare with the wap password on my phone. Im using these settings
Make an internet connection,
use cellular line GPRS 3G
Access Point NAME: wap.vodafone.co.uk
username: wap
Password: wap
Http: 212.183.137.12
but whe i enter wap as the password and click finish all good but if i go and look at the password again its changed to 15 letters long. So no matter what i do the password will not stay to wap..
Can anyone help please, iv searched the forum without much luck
Beamer

Beamerj said:
Hi everyone
having a nightmare with the wap password on my phone. Im using these settings
Make an internet connection,
use cellular line GPRS 3G
Access Point NAME: wap.vodafone.co.uk
username: wap
Password: wap
Http: 212.183.137.12
but whe i enter wap as the password and click finish all good but if i go and look at the password again its changed to 15 letters long. So no matter what i do the password will not stay to wap..
Can anyone help please, iv searched the forum without much luck
Beamer
Click to expand...
Click to collapse
With many password entries you cannot count the asterisks. Often the program is set to obscure the number of characters by inserting a fixed number of asterisks for security reasons. So if you cannot connect I doubt it is for that reason.
Mike

Hi mike
i did wonder that but iv tried lots of setting without much luck can you confirm the settings are correct plz.
ta beamer

O2 MMS settings for HTC Kaiser (TyTn II)

Any one out there know how to configure MMS for O2 on WM6?
I asked O2 for help and they said my phone was not compatible. I find that hard to believe as it's just a variant on XDA. I have seen several settings muted on various sites but it’s hard to piece it all together on WM6. Any help from some one who’s got it working would be well received
Neil

click on start > messages click on options, a new screen opens click on mms then click the server tab at the bottom. Click new and add the mms settings below, not sure if these are the same for all countries, but these are the uk settings. Once you have created the server press and hold the stylus on it ,in the server list window and click set as default and then delete the old one if there is one there.
Access point name: wap.o2.co.uk (contract customers) or payandgo.o2.co.uk (pay-as-you-go customers)
Username: o2wap (contract customers) or payandgo (pay-as-you-go customers)
Password: password
Authentication: Normal
Data bearer: GPRS
Gateway IP (proxy) address: 193.113.200.195
Session mode: Permanent
URL address: http://mmsc.mms.o2.co.uk:8002

Thanks
Thanks,
I think those are the settings that I have. There is a slight complexity in that I can't enter all this under MMS settings. For some reason on my HTC there is an extra level of indirection.
So under MMS settings-> servers
I can enter
Gateway IP (proxy) address: 193.113.200.195
URL address: http://mmsc.mms.o2.co.uk:8002
I am also invited to enter a port number (for the gateway I think) that defaults to 8080
A Wap Version that defaults to wap 2.0
and "connect Via" which is a drop down.
In this drop down I choose "O2 active".
when I go hunting I can find ... hold your breath.....
start->settings->connections->connections->advanced->select networks
Then in the "programs that automatically connect to the network" drop down I find "o2 active"... and eventually under here I find the settings
Access point name: wap.o2.co.uk
Username: o2wap
Password: password
Data bearer: GPRS
So it sort of hangs together
But alas when I send an MMS it connects to o2 active.... tries 3 times to send then gives up
If you have any ideas i would love to hear them
Neil

Got it sorted
On my second attempt at calling O2 they realised that they had not provisioned my account for MMS. If you have similiar problems make sure you are very insistent with O2. If they get hung up about sending you the settings over the air make it clear that you are happy to set it up manualy.
The setting in the previuos reply work well

These settings also work fine on my TyTN II: If anyone else has problems, remember to always select 'use server-assigned IP address' in the advanced settings, and to set your GPRS to PAP authentication! CHAP doesnt work!

nwimbledon said:
Any one out there know how to configure MMS for O2 on WM6?
I asked O2 for help and they said my phone was not compatible. I find that hard to believe as it's just a variant on XDA. I have seen several settings muted on various sites but it’s hard to piece it all together on WM6. Any help from some one who’s got it working would be well received
Neil
Click to expand...
Click to collapse
hi there, if you please explain the o2 settings for me on pay as you go, this would be great, my handset is : O2 MMS settings for HTC Kaiser (TyTn II)
i cant seem to st it up.
my email address is [email protected]
Thanks