Attempting to push a 5.7gb system.img file to my phone in recovery and it is painfully slow.. as in an hour+ slow. Is there something I can do/update to improve this? h910 ATT variant.
Plug into a USB 3 port
Related
I am trying to connect my Note 3 to my computer and it will not mount as a device that is visible under windows. It was taken for service and when it came back it only connects to the PC as an ADB device, but not MTP when it is fully booted. I can flash firmware while in Odin, I can connect in bootloader mode, I just can not make it visible to transfer files from the computer directly to the phone via cable. Under device manager it says 'SAMSUNG Android ADB Interface'. USB debugging changes nothing either. My S3 shows ADB and MTP but the Note does not. I have attempted with multiple cables on 2 computers and get the same result. If anyone has a suggestion of a way to fix this without having to wipe again, I'd love to hear it. Thanks in advance.
I'm running Vanir 5.0.2 right now and im trying to go back to stock so i want to take everything out of the internal memory through adb since MTP doesn't work at all. I can't use adb through download mode (i can enter download mode though) nor through TWRP. I've installed the drivers on my pc and my pc recognizes the phone but not in a way that it should. I'm thinking that something is wrong within my phone because when i connect my other lg phone my pc recognizes it as an ADB device.. Any help is greatly appreciated.
One thing to note is that ADB over network is working but it won't pull all files from internal.
I managed to get ADB working by going to stock based rom. CloudyG2 to be exact.
Hello Everyone,
I have an issue with my nexus 6p screen all of a sudden being unresponsive to touch. The big error on my part was not setting up my videos and images to automatically backup. So now what i'm trying to do is unlock the phone using ADB and a usb cable but haven't had any luck. I've gotten as far as listing my devices, which show up an unauthorized and seem I can only authorize it from my phone. Q1. is this true? Could there be any other way to authorize my phone, or am I out of luck and my data is kaput? I've also tried an OTG cable but it doesn't load since i'm guessing the OS has to fully load for the cable work.
Do I have any choice on saving my data with a USB cable and command line or can someone suggest a tool that would help me out of this situation?
Put it into fastboot/download mode and flash the latest TWRP recovery.
Use TWRP's file manager or ADB Pull commands to pull your data off. Use ADB push to push a new ROM image and flash over everything except userdata (back it up just in case).
Hello!
The phone stops charging couple days ago.
Before that it's suddenly switch off and not charge, and I thought the battery is dead. But after long charge its turned on again. Now when Android is booted, there is no charging and no seen by PC in ADB or MTP modes.
But if I power phone off, charging is back again, but slower than usual.
Flash Tool is also work, I tried to flash two times, the flashing was successful and without any changes about charging when its on
And when phone in fastboot mode, it says "cable NOT connected", however recovery flashing is OK.
Then i found
Code:
Charger exist but USB is host
Message in the boot log.
Don't know how to deal with this USB state. And no matter cable connected or not while booting. I use original USB cable from phone's package.
How to fix that? Is it software or hardware issue? I'm confused.
PS. Sorry for my bad English.
Hi, I really need help. three months ago, some weeks after my Mi 9T overheated on sun (don't know if that has some relation to the issue), it suddenly stopped charging while on, unless I rebooted or turned off. Also, it had difficulties to transfer files to PC and connect to a flash drive by OTG.
Then, I took it to a guy and he said I needed to replace the charging port, and so I did. But only now, after a serious issue. I was changing my rom from MiRoom (MIUI 12) to Evolution X, since the MiRoom's developer ended the rom's support. But It didn't work, It boots into Fastboot mode. I tried to connect to PC and OTG, on recovery mode, but neither worked. The PC doesn't recognize my phone, and the OTG flash drive isn't recognized by the phone.
I bought the charging connector online and paid that guy to replace it. The port feels better, the connector feels way steadier when pluged in, but I still can't know if it charges while on and file transfer to PC or OTG is still not working. So, I'm stuck on recovery mode, in a rom that doesn't boot and a USB port that doesn't work properly. If anyone has a clue of what part I might take to replace or a repair, or maybe a software solution, if that's the case, I would be really thankful.