Thanks to XDA, I've been running LineageOS 14.1 on my LEX727 for months now, updating to most nightly releases with no issues. However, when the phone rebooted after updating to the 10/20/17 nightly, it got stuck on the boot animation screen (green circle moving right to left on the arc) and would go no further. I rebooted into TWRP and flashed back to 10/13 which has been working fine. Same results after attempted updates to the 10/27 and 11/3 releases. I even tried a manual update from TWRP using USB OTG with the same result.
Any ideas of what's gone wrong here? Anything I can try? All I know to do at this point is wipe and install clean but I'd rather not if possible. Thanks!
fraxby79 said:
Thanks to XDA, I've been running LineageOS 14.1 on my LEX727 for months now, updating to most nightly releases with no issues. However, when the phone rebooted after updating to the 10/20/17 nightly, it got stuck on the boot animation screen (green circle moving right to left on the arc) and would go no further. I rebooted into TWRP and flashed back to 10/13 which has been working fine. Same results after attempted updates to the 10/27 and 11/3 releases. I even tried a manual update from TWRP using USB OTG with the same result.
Any ideas of what's gone wrong here? Anything I can try? All I know to do at this point is wipe and install clean but I'd rather not if possible. Thanks!
Click to expand...
Click to collapse
I'd say do a clean install. If i have any issues with a rom booting i'll factory reset and install again. If i still have issues i'll just use another rom.
fraxby79 said:
Thanks to XDA, I've been running LineageOS 14.1 on my LEX727 for months now, updating to most nightly releases with no issues. However, when the phone rebooted after updating to the 10/20/17 nightly, it got stuck on the boot animation screen (green circle moving right to left on the arc) and would go no further. I rebooted into TWRP and flashed back to 10/13 which has been working fine. Same results after attempted updates to the 10/27 and 11/3 releases. I even tried a manual update from TWRP using USB OTG with the same result.
Any ideas of what's gone wrong here? Anything I can try? All I know to do at this point is wipe and install clean but I'd rather not if possible. Thanks!
Click to expand...
Click to collapse
I am in the same situation. Have tried all combinations of wiping and resetting with all 3 of the latest nightlies and still cannot boot. I can successfully boot into a stock rom but, I'd rather not. I guess I will go back to the 10/13 nightly since it worked (mostly) before this debacle. Hopefully next week's update will solve this problem.
Thanks for your reply, islandlife98. I'm not super-confident at this ROM thing yet so backing up, wiping and reinstalling is something I'd undertake reluctantly. I was hoping this was a common situation with a simple fix that I just had been unable to find. Always prefer to actually solve a problem if possible rather than just wipe it out. (Although when it comes to tech, wiping it out is often the best or only solution. Almost always the quickest.)
JBealZy, thank you for letting me know you're in the same boat! After seeing no mention of this issue here, I assumed it was some weird glitch with my phone rather than a problem with the updates. If you've done a full wipe and re-install but still haven't been able to boot into any of the last three releases then I'm glad I hesitated. (That was a concern I'd had: that it might not work even after a clean install.) Think I'll stick with 10/13 for now and keep trying the new releases; easy enough to roll back if it fails now that I've figured it out.
Lmao same problem here with the 2017-11-11 and 2017-11-03 udpate. Not tested yet with 2017-10-27 or 2017-10-20 but that's my last choice because after 2017-10-13 update all links are removed. I do a clean install every time .. What other rom is better ?
Problem resolved .. i have wiped internal storage too and able to install the last version. I think i'm gonna use another ROM because i don't really want to reinstall all of my applications everytime i do an update. :/
Deediezi said:
Lmao same problem here with the 2017-11-11 and 2017-11-03 udpate. Not tested yet with 2017-10-27 or 2017-10-20 but that's my last choice because after 2017-10-13 update all links are removed. I do a clean install every time .. What other rom is better ?
Problem resolved .. i have wiped internal storage too and able to install the last version. I think i'm gonna use another ROM because i don't really want to reinstall all of my applications everytime i do an update. :/
Click to expand...
Click to collapse
I am using Paranoid ( latest version) and everything works flawlessly.
Sent from my LEX727 using XDA Labs
Deediezi said:
Lmao same problem here with the 2017-11-11 and 2017-11-03 udpate. Not tested yet with 2017-10-27 or 2017-10-20 but that's my last choice because after 2017-10-13 update all links are removed. I do a clean install every time .. What other rom is better ?
Problem resolved .. i have wiped internal storage too and able to install the last version. I think i'm gonna use another ROM because i don't really want to reinstall all of my applications everytime i do an update. :/
Click to expand...
Click to collapse
Another victim! So weird, I wonder what's going on there. None of the updates since my original post have worked so I've come to the conclusion that I'm going to have to do a clean install. Just need to find a time do it. Good to hear it worked for you.
LineageOS is the only ROM I've tried but since I have to wipe my phone anyway I may try some others. Paranoid Android looks interesting and Tsongming says it's working well.
fraxby79 said:
Another victim! So weird, I wonder what's going on there. None of the updates since my original post have worked so I've come to the conclusion that I'm going to have to do a clean install. Just need to find a time do it. Good to hear it worked for you.
LineageOS is the only ROM I've tried but since I have to wipe my phone anyway I may try some others. Paranoid Android looks interesting and Tsongming says it's working well.
Click to expand...
Click to collapse
Yea i'm downloading Paranoïd right now for testing it .. Don't want a broken operating system on my phone haha
If anyone's still interested, I first tried flashing Lineage after wiping all but internal storage and still couldn't get past the boot animation. Then did a full factory-reset wipe including the internal storage, re-flashed, and it finally booted. The first OTA update since then came through today and went off without a hitch so all seems well for now.
I did take a look at Paranoid before going back to Lineage. One big reason I use a custom ROM is to get security updates quickly and LOS reports the security patch level in the settings; I couldn't find this info in PA. Also, I use a pattern to unlock my phone and there didn't appear to be a way use a larger grid than the default 3x3. On the plus side (sort of), PA includes the LeEco remote control app, which seems to be the only way to use the IR hardware on this phone, but it asks for more permissions than I want to give (which, of course, is not PA's fault). So admittedly I didn't really give it a full and fair trial but those few little issues sent me back to the (usually) reliable familiarity of LOS.
I received a new LEX722 yesterday. The TWRP for zl1 is working fine, but I cannot get lineagos working.
I deleted:
- dalvik,
- system,
- cache
- data
- and also the internal storage
after rebooting into twrp I enabled usb debugguung and pushed the lineageos and gapps images via adb push to the phone.
I installed lineageos and gapps nano, but after booting to system, I get stuck in a black screen looping to a dark grey luminated display (no graphics at all).
Heistergand said:
I received a new LEX722 yesterday. The TWRP for zl1 is working fine, but I cannot get lineagos working.
I deleted:
- dalvik,
- system,
- cache
- data
- and also the internal storage
after rebooting into twrp I enabled usb debugguung and pushed the lineageos and gapps images via adb push to the phone.
I installed lineageos and gapps nano, but after booting to system, I get stuck in a black screen looping to a dark grey luminated display (no graphics at all).
Click to expand...
Click to collapse
Sorry, can't help you with that since I have a LEX727 which is apparently quite different from the LEX722. Official LineageOS is only supported on the LEX720 and LEX727: [ https://wiki.lineageos.org/devices/zl1 ]. The LEX722 (Elite) has it's own section here on the LeEco Pro 3 forum so check that out and see what they've come up with.
Related
Hi Guys,
I am not sure if I am posting in the right place, but I could use some assistance on the Team EOS nightlies. They won't let me post in the DEV section yet, becuase I am mostly reader, not a poster. Anyway....
I've been running the EOS roms for a while, but I can't seem to run any nightly past 74. 74 runs great, when I tried to update to 75 (rom/gapps/wipe cache) it won't get past the "DUAL CORE" logo. I thought I bricked my xoom, but I am able to boot to recovery, reflash 74 (gapps/wipe) and it boot with no issue. I did a full wipe, and tried again with 76 but no joy (77 wasn't out at the time). I thought it was a problem with n75 and n76. I flashed back to n14 and it works fine, and I can upgrade back to n74. Tonight I tried to update again to n77, but still no dice. I let it sit for 15 minutes at the "Dual Core" logo, and all I noticed is that is got warm, but still no boot.
Any thoughts? All advise is welcome!
BTW, this is for a Stingray 4g xoom
And while I have your attention, I love the work you guys do, and this community, it really makes Android something special!
Weird. Try going into fastboot and do a full wipe of userdata, cache, and system. Then install. If need be, do a backup. This will totally wipe your device.
Wipe cache, wipe dalvik, flash ROM, flash GAPPS, fix permissions. Do it in that order and you should be fine.
Also make sure your using the latest GAPPS. It should be dated 2012-03-17.
Good Luck.
Still not working right, very frustrated, but I have new information
dellenrules said:
Wipe cache, wipe dalvik, flash ROM, flash GAPPS, fix permissions. Do it in that order and you should be fine.
Also make sure your using the latest GAPPS. It should be dated 2012-03-17.
Good Luck.
Click to expand...
Click to collapse
bigrushdog said:
Weird. Try going into fastboot and do a full wipe of userdata, cache, and system. Then install. If need be, do a backup. This will totally wipe your device.
Click to expand...
Click to collapse
Thanks to both of you. I did try this. What I have discovered so far is that some of the flashing fun I have been doing with my may have caused so minor issues with my external SD Card. I backed up the internal to it, and pulled it. I went through the process of nuking the xoom entirely. I.E. Wiped Cache, dalvik, full wipe, factory reset, reset permission, and deleted everything off the internal SD (wasn't in this order, but it all got done) I was able to flash N77, without GAPPS fine. It seemed to run faster with nothing else installed. Rebooted a few times, no problem. I was stoked. I flashed gapps, 03-17 version (the latest). factory reset again so that it was fresh and wiped the cache (just in case). It booted again no problems, ran me through initial config, and then began downloading my apps back. It seemed to run much faster than it ever did before.
Then I rebooted it, without doing any titanium backup restores, just fresh tablet, N77 with my 90 or so apps freshly installed from the market, and it froze again at the "Dual Core" boot screen. I waited hoping for some delayed joy, but none came.
So I went back through the process once again, factory reset, N77 install, wipe cache, install GAPPs. Booted.....initial config, auto downloaded 90 apps from market, reboot......dead.
So then I just flashed N74 again, wiped cache, install GAPPS, initial config, app download.....reboot.......works fine.
<general frustration directed at tablet, not anyone here/>
What gives???? I can't tell what the difference in internal apps in the ROM are that could be conflicting with the ones installed from the market.
Why the hell is N74 working and N77 not, when the apps in both ROMs look the same?
Why does N77 work great when the apps aren't restored?????
Why don't I make a million dollars?????
Why aren't I emperor of the universe???????????????
</general frustration directed at tablet, not anyone here>
Thanks much for all your help!
alright.... i have 2 suggestions these may not work and the second one is a pain in the butt to do but it got me out of a jam way back when i lost my softkeys no matter what i flashed
firstly.. in the sequence of your flashing throw in the 'format /system' see if that has any effect it is 'possible' the system is not being flashed correctly or it could be possible that it is getting corrupted and causing the bootloops (i always format system when full wiping)
second... and this is a pain.. but you can always try flashing back to STOCK... there could be other factors that aren't being flashed or fixed correctly causing ya problems... you can then go through the process and flash directly to the latest build... as i noted earlier this fixed a problem that nothing else could for me and has helped others but really this is a last last resort as it takes alot of time and screwing around
lastly... i have no idea sorry these are all i can input.. if possible can always try and use logcat while booting to see what is causing the crash if im not mistaken and upload a log and one of the devs may be able to have a look at it...
I Would stop dinking around with n77 and go to n90 I had the same issues around those nightly numbers, so I went all the way back to stock... (honeycomb) didn't fix it but I redid the whole install on a higher number and it seems to work itself out..... long story short try another maybe the 1.0 stable by them.
fkntwizted said:
I Would stop dinking around with n77 and go to n90 I had the same issues around those nightly numbers, so I went all the way back to stock... (honeycomb) didn't fix it but I redid the whole install on a higher number and it seems to work itself out..... long story short try another maybe the 1.0 stable by them.
Click to expand...
Click to collapse
He has the STINGRAY not the WINGRAY Xoom.
N77 is the latest for the 4G version. The version he has.
Read the OP
EOS Nightlies hate my xoom, my Xoom wanted CM9 I guess
joshndroid said:
alright.... i have 2 suggestions these may not work and the second one is a pain in the butt to do but it got me out of a jam way back when i lost my softkeys no matter what i flashed
firstly.. in the sequence of your flashing throw in the 'format /system' see if that has any effect it is 'possible' the system is not being flashed correctly or it could be possible that it is getting corrupted and causing the bootloops (i always format system when full wiping)
second... and this is a pain.. but you can always try flashing back to STOCK... there could be other factors that aren't being flashed or fixed correctly causing ya problems... you can then go through the process and flash directly to the latest build... as i noted earlier this fixed a problem that nothing else could for me and has helped others but really this is a last last resort as it takes alot of time and screwing around
lastly... i have no idea sorry these are all i can input.. if possible can always try and use logcat while booting to see what is causing the crash if im not mistaken and upload a log and one of the devs may be able to have a look at it...
Click to expand...
Click to collapse
Thanks much for this. I had already attempted the formatting of everything except the SD card before.....but for sh*ts and giggles I tried it one more time. unfortunately that didn't work.
Using the second option, of reverting stock, I went through sleeplessnija's tutorial on reverting. It really didn't seem that bad, taking me longer to setup my work machine than it did to send the fastboot commands. I was able to get it to boot stock (of course I didn't re-lock it) just fine, and it was quick....so it seems like my hardware is fine.
I used fastboot to put the replacement tiamat recovery, and formatted everything in the mounts menu again. I also mounted my SD card as USB storage and used the full format for it under windows. Then i copied N77 and GAPPS back to it, and re-installed them. It got to the second boot logo (first was the shaking team eos, the second is the square thing with rounded corners that moves). It hung for about 10 minutes, and I shut it off. annoyed.
So I went back into recovery, mounted my SD for USB access from my desktop, and copied the unofficial (which I think is now official) CM9 distro from Team Rogue (Steady's Rom I believe?). I formatted everything, and wiped everything (except the SD) again, and installed CM9 and gapps. Booted fine. Configured account, downloaded 90 apps, rebooted, no problems. Played with it for a while, rebooted....no problems.
I like that my xoom is back up and running......however it seemed that Steadies rom is just a little less fully featured than Team EOS. THAT IS NOT A KNOCK AGAINST TEAM ROGUE OR CM9.....my Xoom is working again (so far) thanks to him (them), and I run CM9 on my AT&T GSII. I just really like Team EOS on my Xoom, and have been with them since the beginning. I would love to know why my xoom suddenly hates the latest nightlies (everything since 74).
Edit: I forgot to ask, Joshndroid.....you mentioned running logcat to see what going on. If it can't boot past the dual core logo or the second boot logo from Team EOS....how do I get the logs? I am not familiar with android's logging.....even though I am a flash-a-holic. I am just thinking that if this is happening to me, maybe I can help out the devs (and myself, and maybe someone else) with the log output.
Edit 2: And Josh.....I forgot to tell you .....good call on the revert to stock answer. I didn't think about that before and thought I was screwed!
Thanks!!
Hey guys. I'm trying to figure out what's going wrong with my Transformer. I'm not experienced with Android development/ROM's so please bare with me.
Rooted my first Android device about a month ago. Made a stupid mistake placing the ROM I was planning to use on the external SD card & didn't backup the install I wiped. Recovered with an official Asus ROM & after about two hours fiddling around I managed to root & load my first ROM (Revolver, whoot!). Very pleased with myself!
Have been using the Revolver ROM for a month without any problems. No deep sleep etc, everything worked perfectly. Using the latest version of Clockworkmod, also no issues so far. Strange thing is that since last monday everytime I (re)boot the device it loads CWM instead of the Android OS. I can get back into Android bij holding volume down during boot & choose to cold boot. Not a big issue but very annoying & can't seem to find the fix.
Searched Google & XDA for a solution. Updated Revolver to 1.3.1 beta, also found the repack by Koush for CWM. Tried fixing permissions, clearing cache, clearing dalvik, wiping & starting over, etc. Everything I tried so far does not fix the CWM-loop I seem to be stuck in.
Would really appreciate some help, I'm probably looking in the wrong direction here. Thanks in advance.
Found something
Finally got out of the CWM loop, found a solution here: http://forum.xda-developers.com/showthread.php?t=1622814&page=2
Strange thing is that after I flashed it with the fix CWM changed to the touch mod I recently installed but never seemed to work. If I understand correctly the fix only deleted the first few lines in the config where the boot in recovery flag should be.
Afterwards I factory wiped the unit & flashed it with a clean ROM. Currently re-installing my apps. I do not have a good feeling on this, tablet seems sluggish last couple of days & I can hear a soft click when the unit reboots. Same sort of click a laptop hdd would make.
Think it's dying on me...
My i9505 was running stock KitKat from Samsung and I tried to install CM13 ROM.
So I used Odin to root the phone and installed TWRP 2.8.6.0. After that I flashed the CM13 ROM and the Gapps Nano.
I got as far as rebooting into CM13. But then the "Google Play Store has stopped working" message keeps popping up starting from the initial setup phase. I ignored the message and went on to setup the wifi but couldn't progress any further. The wifi was detected and connected but then it was stuck on the Checking Connection/Software Update step.
I tried to reflash the rom and gapps again to no avail. The third time to Format Data from TWRP before reflashing - still didn't make a difference.
What's worst is now I cannot even get into TWRP! Whenever I press Vol Up + Power + Home, it will show the small 'entering recovery' message momentarily on the top left corner but then it phone simply restarted again.
I tried re-flashing TWRP using Odin, but still didn't work.
I'm stuck now, cannot get into the OS nor the recovery. Any suggestion as to what to do?
Thank you.
vizavalk said:
My i9505 was running stock KitKat from Samsung and I tried to install CM13 ROM.
So I used Odin to root the phone and installed TWRP 2.8.6.0. After that I flashed the CM13 ROM and the Gapps Nano.
I got as far as rebooting into CM13. But then the "Google Play Store has stopped working" message keeps popping up starting from the initial setup phase. I ignored the message and went on to setup the wifi but couldn't progress any further. The wifi was detected and connected but then it was stuck on the Checking Connection/Software Update step.
I tried to reflash the rom and gapps again to no avail. The third time to Format Data from TWRP before reflashing - still didn't make a difference.
What's worst is now I cannot even get into TWRP! Whenever I press Vol Up + Power + Home, it will show the small 'entering recovery' message momentarily on the top left corner but then it phone simply restarted again.
I tried re-flashing TWRP using Odin, but still didn't work.
I'm stuck now, cannot get into the OS nor the recovery. Any suggestion as to what to do?
Thank you.
Click to expand...
Click to collapse
Format Data from twrp sometime corrupts the file system and brick the phone. (It's happened to me once)
The best way is to flash official firmware via odin and start from there.
I see - I'll try re-flashing the official rom. Btw, would you recommend CWM recovery instead then? Honestly, I'm not very proficient with this whole thing. The reason why I formatted was because I still could see all of my old folders in the phone memory. So I thought Factory Reset didn't really clean up my old rom data.
What do I have to do if I want to start with a really clean slate with CM13 (after reflashing the official one first)?
Also, I still have the issue of CM13 setup being stuck at the Software Update step (right after Wifi setup). Any clue why that happened?
Thanks for taking the time to reply.
vizavalk said:
I see - I'll try re-flashing the official rom. Btw, would you recommend CWM recovery instead then? Honestly, I'm not very proficient with this whole thing. The reason why I formatted was because I still could see all of my old folders in the phone memory. So I thought Factory Reset didn't really clean up my old rom data.
What do I have to do if I want to start with a really clean slate with CM13 (after reflashing the official one first)?
Also, I still have the issue of CM13 setup being stuck at the Software Update step (right after Wifi setup). Any clue why that happened?
Thanks for taking the time to reply.
Click to expand...
Click to collapse
CWM is outdated. Your best bet is TWRP. Try version 3.0.0.
Factory reset doesn't wipe your internal memory, if that's what you mean, you will have to do it manually.
Also, I recommend wiping data, cache, dalvik and system partitions manually from the advanced wipe menu. Factory reset only wipes data and caches, not system.
Oh, and about that stuck at setup issue, just skip that step if possible, you can still change that crap later
If you are unable to set up the ROM, you could flash back to a completely stock ROM and start over.
OK, I'm back on stock Android now.
Before I try flashing CM13 again, I just need suggestions about these two issues I had from previous try:
Unfortunately, Google Play Store has stopped
I have searched for similar issues but can't quite pinpoint the cause. I used the correct GApps for my device and I also removed my SD card prior to installing.
Stuck on Check Connection/Software Update step
Last time I was stuck at this point and, responding to GDReaper, this step couldn't be skipped. The option was grayed out.
vizavalk said:
OK, I'm back on stock Android now.
Before I try flashing CM13 again, I just need suggestions about these two issues I had from previous try:
Unfortunately, Google Play Store has stopped
I have searched for similar issues but can't quite pinpoint the cause. I used the correct GApps for my device and I also removed my SD card prior to installing.
Stuck on Check Connection/Software Update step
Last time I was stuck at this point and, responding to GDReaper, this step couldn't be skipped. The option was grayed out.
Click to expand...
Click to collapse
The sd card has nothing to do with it.
Sometimes gapps don't work on certain roms.
Just try another package.
If you use A-Gapps, the whole first time setup step will be skipped altogether. So that means that you won't run into the risk of getting stuck at that step again.
Or, after flashing the rom, you could use the recovery file manager to delete the setupwizard.apk after you flashed gapps. That should also prevent the initial setup process from initializing at first boot.
vizavalk said:
OK, I'm back on stock Android now.
Before I try flashing CM13 again, I just need suggestions about these two issues I had from previous try:
Unfortunately, Google Play Store has stopped
I have searched for similar issues but can't quite pinpoint the cause. I used the correct GApps for my device and I also removed my SD card prior to installing.
Stuck on Check Connection/Software Update step
Last time I was stuck at this point and, responding to GDReaper, this step couldn't be skipped. The option was grayed out.
Click to expand...
Click to collapse
You probably used Opengapps. That also gives me a lot of errors.
Use Bankgs Gapps instead. They always work for me.
http://download.dirtyunicorns.com/files/gapps/banks_gapps/
GDReaper said:
The sd card has nothing to do with it.
Sometimes gapps don't work on certain roms.
Just try another package.
If you use A-Gapps, the whole first time setup step will be skipped altogether. So that means that you won't run into the risk of getting stuck at that step again.
Or, after flashing the rom, you could use the recovery file manager to delete the setupwizard.apk after you flashed gapps. That should also prevent the initial setup process from initializing at first boot.
Click to expand...
Click to collapse
I used Open GApps, as was recommended in the CM13 post. So are you saying that my two issues were caused solely by the GApps? Because I thought me being stuck at Software Update was due to something else.
Lennyz1988 said:
You probably used Opengapps. That also gives me a lot of errors.
Use Bankgs Gapps instead. They always work for me.
http://download.dirtyunicorns.com/files/gapps/banks_gapps/
Click to expand...
Click to collapse
There are two files - one says Dynamic. But the file sizes are exactly the same. Is there any difference?
vizavalk said:
I used Open GApps, as was recommended in the CM13 post. So are you saying that my two issues were caused solely by the GApps? Because I thought me being stuck at Software Update was due to something else.
There are two files - one says Dynamic. But the file sizes are exactly the same. Is there any difference?
Click to expand...
Click to collapse
Not that I know. Just pick the one without Dynamic.
vizavalk said:
I used Open GApps, as was recommended in the CM13 post. So are you saying that my two issues were caused solely by the GApps? Because I thought me being stuck at Software Update was due to something else.
Click to expand...
Click to collapse
The initial setup process is related to gapps. And I don't recall there being any software update requests during the initial setup. It tells me to wait while it scans for network and WiFis, but I always skip those steps.
Open gapps sometimes work and sometimes they don't. It varies from day to day, since they are updated daily.
Just find a gapps package that works and stick to it until another version of android.
I just want to report back that my CM13 works perfectly with Banks GApps. Thanks to everyone who has helped!
Hello!
I am using LOS 13... no gapps!
I update only when Android Security Bulletin (ASB) gets merged...
I was on July ASB nightly... everything was fine...
Updated from around July 22 nightly to August 12 nightly... Big Mistake! Things went bad.
Oh, I have to flash LOS SU binary everytime, which I did.
Getting bootloops, taking too long, and it goes to optimizing apps, then, before finishing, reboots!
I tried flashing older nightly and newer, 26 aug, one from feb, and again 12 aug, ... with and without SU binary... no luck!
Same problem as mentioned above! When I do manage to get in, apps are force closing, Trebuchet errors, settings options freeze/close, file manager, etc. Some apps works, some force close. And, root is not available even when flashed.
Is this even related to related to current SUPERSU problems being reported?
I looked at recovery.log and kernel.log -- don't know wtf to look for.
I am going to factory reset and start fresh... pain in the A$#
I am asking if anyone else had problems and what could be the cause because I don't want this to happen again when I flash an update next month. I have had no problems since Jan this year!
Thanks!
Identical situation here, never had problems before... Still hoping to avoid factory reset...
Same problem for me, on DU rom, had random reboots constantly since a few days ago. Tried doing a factory reset first, then a factory reset and reinstalled rom and gapps, but every time before the optimizing apps dialog disappears it reboots. I'm going to try installing a different rom.
Update: Wiped system/cache/dalvik/data, installed RR, same problems as before. Tried skipping account setup, android worked fine. Logged in and again the constant reboots.
I guess the nexus is unusable for now.. Hope someone comes with a solution asap
Same here as well... Factory reset didn't help... Every attempt seemed to work in the beginning but bootloops started again soon afterwards.
Thank for replying!
Thanks: Thank you guys for replying! At least now I feel like I am not crazy or alone... especially with such an old device!
What I did: factory reset+Complete wipe (data, cache, system, etc.)/+factory reset... installed TWRP (update), then, LOS 13 8/26 nightly, (no GAPPS), alternative store... and then, apps <--- pain in the ass to do but I got there!
Things are working fine... but I fear still! I am running the basic (minimal, essential) config+apps, just in case things go wrong again!
Rant: I just don't understand how hard it could be to simply patch monthly security updates carefully, while keeping things stable. [I complain, but of course, I am not doing it ; ) ] I blame Oreo coming out 22 aug, as all eye balls moved to LOS 15 bring up!
Future: I might have to look into an alternative ROM myself... with ROOT and without GAPPS... but most important an active community. Let me know if you guys have any suggestions -- something working well with better (active) community support!
PS: August ASB has been merged (LOS 13) but no zip file has been generated yet! I hope that does not fsck things up again, when I flash!
Thanks!
Now it got me too. Yesterday i flashed the current / official LOS13 nightly 09/9 and since reboot i've constant bootloops.
Help! I've got a bootloop problem, the Nexus 10 will not hard reset, it just goes back into android os then re boots.
I first tried to backup and reset from within the device by using settings backup and reset
that sent it into an endless bootloop which then led me to try the hard reset with power and vol up down then power and vol up to access the erase all data setting but that still goes back to the android os, and before you have a chance to do anything re boots. So the hard reset is not working, what do I need to flash it via windows or mac and how do I do that? This is my 1st post so if anyone can help me thanks in advance. I am hoping that something along the lines of this will fix it. https://forum.xda-developers.com/nexus-10/general/guide-how-to-install-android-t3312390 any help is great appreciated
For me, it turned out that the latest nightly of LOS seems to have a problem with additional launchers. For me Nova was installed. After the factory reset and reinstalling of all apps I installed Lawnchair-Launcher and the problems started again. I managed to deinstall it and everything is running smoothly again.
In my case it's happening even without additional launchers installed, I just have Trebuchet that comes with LOS13...
Update from 8/26 to 9/9 -- all good, so far!
Hello!
The instructions from your link on how to clean install and update Nexus 10 are excellent!
I clean wiped and installed LOS 13 on Nexus 10 -- 8/26 nightly and then, updated to 9/9 nightly with August ASB merged! -- I have had it going for a few days -- and so far not experiencing any problems! I have additionally flashed SU to have root access and no GAPPS!
Some one else has a thread [https://forum.xda-developers.com/nexus-10/help/nexus-10-manta-lineage-os-13-bootloop-t3672215] and thinks that not launchers (or other apps) but something else within the system is the problem. I think I agree, because, I had basic LOS 13 running all along, with SU root and no GAPPS. Going from July to August, I had bootloop/force close/app crash problems!
Something is definitely going on -- so, I am running just a basic setup for now! Not sure if we will get LOS 14.1... maybe! I am going to update carefully and only after backing up data, when new ASBs get merged -- just in case this happens again!
Thanks!~
Da71 said:
Help! I've got a bootloop problem, the Nexus 10 will not hard reset, it just goes back into android os then re boots.
I first tried to backup and reset from within the device by using settings backup and reset
that sent it into an endless bootloop which then led me to try the hard reset with power and vol up down then power and vol up to access the erase all data setting but that still goes back to the android os, and before you have a chance to do anything re boots. So the hard reset is not working, what do I need to flash it via windows or mac and how do I do that? This is my 1st post so if anyone can help me thanks in advance. I am hoping that something along the lines of this will fix it. https://forum.xda-developers.com/nexus-10/general/guide-how-to-install-android-t3312390 any help is great appreciated
Click to expand...
Click to collapse
Folks, there is a defect open in the official lineage bug tracking system. please add your comments there - maybe this needs some more support to get looked at:
https://jira.lineageos.org/browse/BUGBASH-1075
So I recently flashed my Axon 7 A2017U with LOS 15.1. There were a couple of issues, like getting a corrupted device warning and having to wait for my phone to boot, but once it booted it was all fine.
Since I felt confident enough to have flashed LOS, I thought I could get rid of the annoying black warning screen (following forum advice). Alas, I wasn't able to, so I tried to do a manual update of LOS, but I couldn't do that either, plus I lost my previous LOS version.
Once I was finally able to reflash LOS, GBoard didn't appear in the initial settings to connect to wifi. And this is where I'm at right now.
Does anybody know of anything I can try out? Much appreciated.
AngelMons said:
So I recently flashed my Axon 7 A2017U with LOS 15.1. There were a couple of issues, like getting a corrupted device warning and having to wait for my phone to boot, but once it booted it was all fine.
Since I felt confident enough to have flashed LOS, I thought I could get rid of the annoying black warning screen (following forum advice). Alas, I wasn't able to, so I tried to do a manual update of LOS, but I couldn't do that either, plus I lost my previous LOS version.
Once I was finally able to reflash LOS, GBoard didn't appear in the initial settings to connect to wifi. And this is where I'm at right now.
Does anybody know of anything I can try out? Much appreciated.
Click to expand...
Click to collapse
Maybe you can try wipe data (factory reset), and or install gapps?
ttkian said:
Maybe you can try wipe data (factory reset), and or install gapps?
Click to expand...
Click to collapse
I had to restart the flashing from zero, and even downloaded gapps again just in case. After flashing everything again I finally got a keyboard!