Related
So for the last 5 days I had some very weird problems with my phone. About 2 weeks ago I started with my first Cronos Rom and it worked great. I flashed 1.5 and 1.5.1 without problems and I used it without an ext partition all the time. But then the problems started. When I wiped my whole phone and tried to reinstall 1.5.1 JIT, the phone didnt boot anymore (stuck on the "Android" bootscreen). I wiped again and again, tried 1.5.1 without JIT, 1.5 etc, but I couldt get the phone to work. Nothing worked, so I created an ext partition and tried again. It worked. My phone started and I was able to use it for about a day without problems though I didnt want apps2sd. But then some other weird things happened. 3 Days ago I bought a bigger SD Card, partitioned it, wiped the whole phone and flashed 1.5.1 JIT. The phone started, but after I installed a few apps, I got an error message (installing xxx failed). I found out that theres an "repair ext" function, and it worked, but after I installed some more apps, the problem was back. The second problem was, that after rebooting the phone, more and more apps wouldnt start anymore (FC). The last problem that occured was an FC of the market app. After that, I wiped everything again, tried to flash 1.5.1 JIT, but it happened exactly the same like on the first time. Problems installing apps, FCs, stuck on boot etc.
I am totally down at the moment because I killed my whole weekend trying to get my phone working again. Could anyone please help my with this? I just dont understand what I did wrong. Shouldnt a complete wipe fix almost every problem? And I dont understand why I suddenly cant use my phone without an ext partition. Any Cronos version I try freezes on bootscreen without an ext patition. Is there any way to get my hero working again? Please please help me.
(PS: I also posted this on the Cronos Board.)
I would take out the sd card, wipe system and dalvik cache, and install some custom rom.
well, to make sure it is NOT your phone, did you try another ROM? Eliminate possible problems?
At least try something that is known and stable, like a stock rom, the Taiwain-rooted-repacks (not a rom based on it, but just the taiwan rom rooted) or good ol' MoDaCo 3.2 (based on 1.5 stock).
Til now I just tried the last 2 or 3 Cronos Roms, and as I said, they didnt work, but when I get home from work I'll try the Modaco Rom I used before.
I dont understand what this has to do with the Rom I use. I always wiped the whole phone, dalvik, etc. so shouldnt it just work like the first time I flashed it? No matter what Rom I use?
Another weird thing (could have something to do with this): After I wiped everything and flashed Cronos 1.5.1 JIT, the market still knew what apps I had installed last time. It showed my bought apps AND the apps I was able to install before the latest crash. So does this mean the phone wasnt wiped completely?
The market tracks your purchases and (free) downloads through your google account. So that's normal that the download-list is full.
But it might very well be that you didn't wipe correctly, although I'm curious how you manage to accomplish that. What is your current recovery?
The whole point about trying another ROM is elimination. It doesn't need to make sense, but you need to check things of the list.
There is something weird going on, so trying to solve it logically will only get you so far . Keep trying to narrow down the list of causes. Might well be a bug with Cronos 1.5, or the overclock not working these days because your phone is just a bit hotter than before, who knows.. Like I said: eliminate causes!
I'm using the newest AmonRa recovery to wipe the phone.
Theres one thing I forgot: Yesterday I flashed 1.5.1 without JIT, and then 1.5.1 JIT right after it (just rebooted a few times between). The phone worked great until my SD card crashed. In the taskbar it always showed me "checking for errors"(something like that, my phone's in german ), but in my PC and in the recovery the card worked like always, so I had to wipe the card and start again from the beginning.
Try another ROM , and if that doesn't work, try without SD card.
tombond said:
I'm using the newest AmonRa recovery to wipe the phone.
Theres one thing I forgot: Yesterday I flashed 1.5.1 without JIT, and then 1.5.1 JIT right after it (just rebooted a few times between). The phone worked great until my SD card crashed. In the taskbar it always showed me "checking for errors"(something like that, my phone's in german ), but in my PC and in the recovery the card worked like always, so I had to wipe the card and start again from the beginning.
Click to expand...
Click to collapse
Maybe sdcard faulty? What are the logs you get when booting up the phone?
Soooo, I wiped everything again and flashed Modaco 2.8 without an ext partition. It booted correctly, so I wiped the dalvik cache and flashed Cronos 1.5.1 JIT. It also booted (wow, first time it booted without ext since all the problems started to occur) but I instantly got FC's (phone app for example). Now I wiped completely again and flashed 1.5.1 JIT. I hope it boots, as I still dont have an ext partition. As soon as I know something new, I'm gonna tell you.
So now it seems like its working again. I was able to install all the apps I need without a single error and now I'm restoring my settings and contacts. Suddenly it even works without ext again.
I guess there was something very big f*ked up that I couldnt repair by simple wiping the phone. Very weird that just flashing Modaco got it running again. Now I have back my working phone with ultrafast Cronos Rom and without App2SD, perfect. At least till now I hope it keeps working.
Thanks for your help guys, I think I would have smashed the phone to the wall sooner or later. I never thought about flashing Modaco so I'm happy there are people like you.
Thanks again, and thanks to Feeyo for his unbelievable Rom.
PS: Can I uninstall, Facebook and Footprints without destroying everything again?
Yes, just delete both apps using ADB or use a root explorer, search both apps in System/app and delete them.
Or you could use the MoDaCo online kitchen for removing those apps.
I have been running my a7 with dexter's mod 1.4 for about 1 1/2 weeks...everything has gone well. This afternoon I turned on the device and it failed to complete boot. The word Android would come up and then nothing. I tried to reboot, reset, but device would do neither...nor would it turn off completely. I kept trying to take it into recovery mode and then after several tries was able to wipe, do update again, and get everything back as before. What would cause this and should I look for this to happen again? deepmagic
My a7 was running well for about a week since it quit...but today when I booted up device, it failed to recognize sd card...same card used for updating to mod 1.4...same card I've been using to listen to my music, etc...but now won't recognize...I've tried two different micro sdhc cards..formatted, reformatted, but device continues to display mount sd card...all else works fine! Does anyone have any new ideas? I can't even reinstall mod since a7 can't read my cards. Thanks for any input that would be helpful. I understand these issues are ongoing for many out there...what to do?
deepmagic said:
I have been running my a7 with dexter's mod 1.4 for about 1 1/2 weeks...everything has gone well. This afternoon I turned on the device and it failed to complete boot. The word Android would come up and then nothing. I tried to reboot, reset, but device would do neither...nor would it turn off completely. I kept trying to take it into recovery mode and then after several tries was able to wipe, do update again, and get everything back as before. What would cause this and should I look for this to happen again? deepmagic
Click to expand...
Click to collapse
Mine has hung on a black screen on me. Seemed that it didn't fully come out of sleep mode.
I was able to recover by holding the power button for 15 seconds to hard power down. No data loss.
deepmagic said:
I have been running my a7 with dexter's mod 1.4 for about 1 1/2 weeks...everything has gone well. This afternoon I turned on the device and it failed to complete boot. The word Android would come up and then nothing. I tried to reboot, reset, but device would do neither...nor would it turn off completely. I kept trying to take it into recovery mode and then after several tries was able to wipe, do update again, and get everything back as before. What would cause this and should I look for this to happen again? deepmagic
Click to expand...
Click to collapse
Exact same thing happened to me this morning. Tried to reset - not happening. Hard powered down. Don't have time to try anything else right now. I'm new to the forums and new to android. Wish me luck! I've been loving my A7, and much appreciation to Dexter and all the other knowledgeable hackers/modders/posters.
hey the same thing happened 2 me twice. Once the first day after i got it, since i had only had it for 1 day i wiped it reinstalled dexter's mod 1.41 and it worked. First app i installed was backup root. Now, a week later the exact same thing is happening. This time i dont want to wipe it because of all of the apps i have installed, games ive played etc. Any ideas? Could we just try reinstalling dexter's md without wiping? Or wiping reinstalling and recover from a backup?
Also have you installed busybox? I had just installed it both times before it failed to turn on. Maybe its just coincidence but you never know..
-D
Thanks to anyone who can help! and also thanks Dexter for all your hard work as well as everyone else that has contributed to the elocity, im lovin it! (when it works )
success!!!!
I got it to work! I don't have a permanent fix but if it happens again just boot into recovery and reinstall the dexter's mod update 1.41 and it works again! No wiping required. This isn't a permanent fix but it will work until we find one
-Dylan
Hasn't happened to me (yet) but I didn't upgrade to the newest ROM. I'm still using 1.3and it has been very stable. Only issue I've had was when I tried to use Killswitch to go to sleep mode when the cover is shut (great idea) but it didn't work and froze all except the live wallpaper. Weird.
Good luck, guys.
in the event it does happen to you, you might want to check out my apx thread for reflashing the factory firmware if you can't get your tablet unstuck. theres alternatives if you don't want to get stuck again.
The method you outline seems so complex...way above my abilities, but makes me wish I had followed though on some early programming training opportunities. That was the road not travelled.
okantomi; while i wouldn't encourage others to follow thru with procedures they fear would cause more harm, i would mention that if you google up my nick you'll find i've been able to do much w/ android software and devices while not knowing anything about programming. if i can do it, anyone can. i just wanted some themes for my phone.
i'm just an android hobbyist by night (and when i get a chance during the day), and a computer tech by day. no programming expertise, but i can reasonably reverse engineer and port software and components using simple file managers like ztreewin(trialware).
don't be mistaken that the folks out there providing you solutions necessarily know anything about programming or software development. just how to chef up files at different levels. i understand this doesn't go for everybody.
Thanks for the encouragement. I'm impressed with what you've been able to do. It is also nice to read upbeat comments about the A7. There is something sort of special about a device that you really almost have to build yourself... putting so much into it... biting your fingernails to nubs with each ROM flashing. You don't get as attached to any device that is 100 percent complete right out of the box, though of course there would be a lot less aggravation.
Hey everyone.
I would appreciate some help or suggestions. Maybe someone will know the problem, which I can't seem to figure out. First thing first, I couldn't post in the release thread because I don't have the proper post count.
Anyways, I am not new to installing ROMs on my phone. I can install and run CyanogenMOD easily, and have done so many times. My phone is rooted. So I went from the stock ROM on the MyTouch 4G to CyanogenMOD 7, with no problems. I used it for a while, and then when I saw Virtuous Fusion come out, I wanted that installed. I had tons of trouble getting it to work, even though I was doing everything I was supposed to do. Reset my phone, cleared all caches and data, pretty much cleared everything out. I tried installing from the zip several times in clockwork recovery, and it wouldn't get me past the boot screen. The boot screen would either loop forever, and never get past it, or the boot screen would load up for 3 seconds and then the screen would go completely black (in a state where it looked like the phone turned off).
Eventually, after about the 10th install (which were done all the same exact way), the Fusion ROM decided to work on me and everything went perfectly. This was the first day it was released. I saw the ROM has been through some updates, so I decided to do the recommended clean install of the new version. I am having the same problem as I did before with the boot screen. I temporarily flashed Cyanogenmod so I can have a working phone again, but I would really like to be on Fusion. My favorite ROM out of all the ones I have tried. Does anyone know what could be causing this?
What version of ClockworkMod are you using? Make sure you're on 3.0.2.4 to insure ultimate reliability. Also verify the MD5 hash that eViL provides before flashing. Not doing so means you could have any number of problems caused by a corrupt file download.
Are you rebooting into ROM MANAGER. This ROM is not suppose to be loaded while in the Android OS.
Hi Guys,
I am not sure if I am posting in the right place, but I could use some assistance on the Team EOS nightlies. They won't let me post in the DEV section yet, becuase I am mostly reader, not a poster. Anyway....
I've been running the EOS roms for a while, but I can't seem to run any nightly past 74. 74 runs great, when I tried to update to 75 (rom/gapps/wipe cache) it won't get past the "DUAL CORE" logo. I thought I bricked my xoom, but I am able to boot to recovery, reflash 74 (gapps/wipe) and it boot with no issue. I did a full wipe, and tried again with 76 but no joy (77 wasn't out at the time). I thought it was a problem with n75 and n76. I flashed back to n14 and it works fine, and I can upgrade back to n74. Tonight I tried to update again to n77, but still no dice. I let it sit for 15 minutes at the "Dual Core" logo, and all I noticed is that is got warm, but still no boot.
Any thoughts? All advise is welcome!
BTW, this is for a Stingray 4g xoom
And while I have your attention, I love the work you guys do, and this community, it really makes Android something special!
Weird. Try going into fastboot and do a full wipe of userdata, cache, and system. Then install. If need be, do a backup. This will totally wipe your device.
Wipe cache, wipe dalvik, flash ROM, flash GAPPS, fix permissions. Do it in that order and you should be fine.
Also make sure your using the latest GAPPS. It should be dated 2012-03-17.
Good Luck.
Still not working right, very frustrated, but I have new information
dellenrules said:
Wipe cache, wipe dalvik, flash ROM, flash GAPPS, fix permissions. Do it in that order and you should be fine.
Also make sure your using the latest GAPPS. It should be dated 2012-03-17.
Good Luck.
Click to expand...
Click to collapse
bigrushdog said:
Weird. Try going into fastboot and do a full wipe of userdata, cache, and system. Then install. If need be, do a backup. This will totally wipe your device.
Click to expand...
Click to collapse
Thanks to both of you. I did try this. What I have discovered so far is that some of the flashing fun I have been doing with my may have caused so minor issues with my external SD Card. I backed up the internal to it, and pulled it. I went through the process of nuking the xoom entirely. I.E. Wiped Cache, dalvik, full wipe, factory reset, reset permission, and deleted everything off the internal SD (wasn't in this order, but it all got done) I was able to flash N77, without GAPPS fine. It seemed to run faster with nothing else installed. Rebooted a few times, no problem. I was stoked. I flashed gapps, 03-17 version (the latest). factory reset again so that it was fresh and wiped the cache (just in case). It booted again no problems, ran me through initial config, and then began downloading my apps back. It seemed to run much faster than it ever did before.
Then I rebooted it, without doing any titanium backup restores, just fresh tablet, N77 with my 90 or so apps freshly installed from the market, and it froze again at the "Dual Core" boot screen. I waited hoping for some delayed joy, but none came.
So I went back through the process once again, factory reset, N77 install, wipe cache, install GAPPs. Booted.....initial config, auto downloaded 90 apps from market, reboot......dead.
So then I just flashed N74 again, wiped cache, install GAPPS, initial config, app download.....reboot.......works fine.
<general frustration directed at tablet, not anyone here/>
What gives???? I can't tell what the difference in internal apps in the ROM are that could be conflicting with the ones installed from the market.
Why the hell is N74 working and N77 not, when the apps in both ROMs look the same?
Why does N77 work great when the apps aren't restored?????
Why don't I make a million dollars?????
Why aren't I emperor of the universe???????????????
</general frustration directed at tablet, not anyone here>
Thanks much for all your help!
alright.... i have 2 suggestions these may not work and the second one is a pain in the butt to do but it got me out of a jam way back when i lost my softkeys no matter what i flashed
firstly.. in the sequence of your flashing throw in the 'format /system' see if that has any effect it is 'possible' the system is not being flashed correctly or it could be possible that it is getting corrupted and causing the bootloops (i always format system when full wiping)
second... and this is a pain.. but you can always try flashing back to STOCK... there could be other factors that aren't being flashed or fixed correctly causing ya problems... you can then go through the process and flash directly to the latest build... as i noted earlier this fixed a problem that nothing else could for me and has helped others but really this is a last last resort as it takes alot of time and screwing around
lastly... i have no idea sorry these are all i can input.. if possible can always try and use logcat while booting to see what is causing the crash if im not mistaken and upload a log and one of the devs may be able to have a look at it...
I Would stop dinking around with n77 and go to n90 I had the same issues around those nightly numbers, so I went all the way back to stock... (honeycomb) didn't fix it but I redid the whole install on a higher number and it seems to work itself out..... long story short try another maybe the 1.0 stable by them.
fkntwizted said:
I Would stop dinking around with n77 and go to n90 I had the same issues around those nightly numbers, so I went all the way back to stock... (honeycomb) didn't fix it but I redid the whole install on a higher number and it seems to work itself out..... long story short try another maybe the 1.0 stable by them.
Click to expand...
Click to collapse
He has the STINGRAY not the WINGRAY Xoom.
N77 is the latest for the 4G version. The version he has.
Read the OP
EOS Nightlies hate my xoom, my Xoom wanted CM9 I guess
joshndroid said:
alright.... i have 2 suggestions these may not work and the second one is a pain in the butt to do but it got me out of a jam way back when i lost my softkeys no matter what i flashed
firstly.. in the sequence of your flashing throw in the 'format /system' see if that has any effect it is 'possible' the system is not being flashed correctly or it could be possible that it is getting corrupted and causing the bootloops (i always format system when full wiping)
second... and this is a pain.. but you can always try flashing back to STOCK... there could be other factors that aren't being flashed or fixed correctly causing ya problems... you can then go through the process and flash directly to the latest build... as i noted earlier this fixed a problem that nothing else could for me and has helped others but really this is a last last resort as it takes alot of time and screwing around
lastly... i have no idea sorry these are all i can input.. if possible can always try and use logcat while booting to see what is causing the crash if im not mistaken and upload a log and one of the devs may be able to have a look at it...
Click to expand...
Click to collapse
Thanks much for this. I had already attempted the formatting of everything except the SD card before.....but for sh*ts and giggles I tried it one more time. unfortunately that didn't work.
Using the second option, of reverting stock, I went through sleeplessnija's tutorial on reverting. It really didn't seem that bad, taking me longer to setup my work machine than it did to send the fastboot commands. I was able to get it to boot stock (of course I didn't re-lock it) just fine, and it was quick....so it seems like my hardware is fine.
I used fastboot to put the replacement tiamat recovery, and formatted everything in the mounts menu again. I also mounted my SD card as USB storage and used the full format for it under windows. Then i copied N77 and GAPPS back to it, and re-installed them. It got to the second boot logo (first was the shaking team eos, the second is the square thing with rounded corners that moves). It hung for about 10 minutes, and I shut it off. annoyed.
So I went back into recovery, mounted my SD for USB access from my desktop, and copied the unofficial (which I think is now official) CM9 distro from Team Rogue (Steady's Rom I believe?). I formatted everything, and wiped everything (except the SD) again, and installed CM9 and gapps. Booted fine. Configured account, downloaded 90 apps, rebooted, no problems. Played with it for a while, rebooted....no problems.
I like that my xoom is back up and running......however it seemed that Steadies rom is just a little less fully featured than Team EOS. THAT IS NOT A KNOCK AGAINST TEAM ROGUE OR CM9.....my Xoom is working again (so far) thanks to him (them), and I run CM9 on my AT&T GSII. I just really like Team EOS on my Xoom, and have been with them since the beginning. I would love to know why my xoom suddenly hates the latest nightlies (everything since 74).
Edit: I forgot to ask, Joshndroid.....you mentioned running logcat to see what going on. If it can't boot past the dual core logo or the second boot logo from Team EOS....how do I get the logs? I am not familiar with android's logging.....even though I am a flash-a-holic. I am just thinking that if this is happening to me, maybe I can help out the devs (and myself, and maybe someone else) with the log output.
Edit 2: And Josh.....I forgot to tell you .....good call on the revert to stock answer. I didn't think about that before and thought I was screwed!
Thanks!!
Thanks to XDA, I've been running LineageOS 14.1 on my LEX727 for months now, updating to most nightly releases with no issues. However, when the phone rebooted after updating to the 10/20/17 nightly, it got stuck on the boot animation screen (green circle moving right to left on the arc) and would go no further. I rebooted into TWRP and flashed back to 10/13 which has been working fine. Same results after attempted updates to the 10/27 and 11/3 releases. I even tried a manual update from TWRP using USB OTG with the same result.
Any ideas of what's gone wrong here? Anything I can try? All I know to do at this point is wipe and install clean but I'd rather not if possible. Thanks!
fraxby79 said:
Thanks to XDA, I've been running LineageOS 14.1 on my LEX727 for months now, updating to most nightly releases with no issues. However, when the phone rebooted after updating to the 10/20/17 nightly, it got stuck on the boot animation screen (green circle moving right to left on the arc) and would go no further. I rebooted into TWRP and flashed back to 10/13 which has been working fine. Same results after attempted updates to the 10/27 and 11/3 releases. I even tried a manual update from TWRP using USB OTG with the same result.
Any ideas of what's gone wrong here? Anything I can try? All I know to do at this point is wipe and install clean but I'd rather not if possible. Thanks!
Click to expand...
Click to collapse
I'd say do a clean install. If i have any issues with a rom booting i'll factory reset and install again. If i still have issues i'll just use another rom.
fraxby79 said:
Thanks to XDA, I've been running LineageOS 14.1 on my LEX727 for months now, updating to most nightly releases with no issues. However, when the phone rebooted after updating to the 10/20/17 nightly, it got stuck on the boot animation screen (green circle moving right to left on the arc) and would go no further. I rebooted into TWRP and flashed back to 10/13 which has been working fine. Same results after attempted updates to the 10/27 and 11/3 releases. I even tried a manual update from TWRP using USB OTG with the same result.
Any ideas of what's gone wrong here? Anything I can try? All I know to do at this point is wipe and install clean but I'd rather not if possible. Thanks!
Click to expand...
Click to collapse
I am in the same situation. Have tried all combinations of wiping and resetting with all 3 of the latest nightlies and still cannot boot. I can successfully boot into a stock rom but, I'd rather not. I guess I will go back to the 10/13 nightly since it worked (mostly) before this debacle. Hopefully next week's update will solve this problem.
Thanks for your reply, islandlife98. I'm not super-confident at this ROM thing yet so backing up, wiping and reinstalling is something I'd undertake reluctantly. I was hoping this was a common situation with a simple fix that I just had been unable to find. Always prefer to actually solve a problem if possible rather than just wipe it out. (Although when it comes to tech, wiping it out is often the best or only solution. Almost always the quickest.)
JBealZy, thank you for letting me know you're in the same boat! After seeing no mention of this issue here, I assumed it was some weird glitch with my phone rather than a problem with the updates. If you've done a full wipe and re-install but still haven't been able to boot into any of the last three releases then I'm glad I hesitated. (That was a concern I'd had: that it might not work even after a clean install.) Think I'll stick with 10/13 for now and keep trying the new releases; easy enough to roll back if it fails now that I've figured it out.
Lmao same problem here with the 2017-11-11 and 2017-11-03 udpate. Not tested yet with 2017-10-27 or 2017-10-20 but that's my last choice because after 2017-10-13 update all links are removed. I do a clean install every time .. What other rom is better ?
Problem resolved .. i have wiped internal storage too and able to install the last version. I think i'm gonna use another ROM because i don't really want to reinstall all of my applications everytime i do an update. :/
Deediezi said:
Lmao same problem here with the 2017-11-11 and 2017-11-03 udpate. Not tested yet with 2017-10-27 or 2017-10-20 but that's my last choice because after 2017-10-13 update all links are removed. I do a clean install every time .. What other rom is better ?
Problem resolved .. i have wiped internal storage too and able to install the last version. I think i'm gonna use another ROM because i don't really want to reinstall all of my applications everytime i do an update. :/
Click to expand...
Click to collapse
I am using Paranoid ( latest version) and everything works flawlessly.
Sent from my LEX727 using XDA Labs
Deediezi said:
Lmao same problem here with the 2017-11-11 and 2017-11-03 udpate. Not tested yet with 2017-10-27 or 2017-10-20 but that's my last choice because after 2017-10-13 update all links are removed. I do a clean install every time .. What other rom is better ?
Problem resolved .. i have wiped internal storage too and able to install the last version. I think i'm gonna use another ROM because i don't really want to reinstall all of my applications everytime i do an update. :/
Click to expand...
Click to collapse
Another victim! So weird, I wonder what's going on there. None of the updates since my original post have worked so I've come to the conclusion that I'm going to have to do a clean install. Just need to find a time do it. Good to hear it worked for you.
LineageOS is the only ROM I've tried but since I have to wipe my phone anyway I may try some others. Paranoid Android looks interesting and Tsongming says it's working well.
fraxby79 said:
Another victim! So weird, I wonder what's going on there. None of the updates since my original post have worked so I've come to the conclusion that I'm going to have to do a clean install. Just need to find a time do it. Good to hear it worked for you.
LineageOS is the only ROM I've tried but since I have to wipe my phone anyway I may try some others. Paranoid Android looks interesting and Tsongming says it's working well.
Click to expand...
Click to collapse
Yea i'm downloading Paranoïd right now for testing it .. Don't want a broken operating system on my phone haha
If anyone's still interested, I first tried flashing Lineage after wiping all but internal storage and still couldn't get past the boot animation. Then did a full factory-reset wipe including the internal storage, re-flashed, and it finally booted. The first OTA update since then came through today and went off without a hitch so all seems well for now.
I did take a look at Paranoid before going back to Lineage. One big reason I use a custom ROM is to get security updates quickly and LOS reports the security patch level in the settings; I couldn't find this info in PA. Also, I use a pattern to unlock my phone and there didn't appear to be a way use a larger grid than the default 3x3. On the plus side (sort of), PA includes the LeEco remote control app, which seems to be the only way to use the IR hardware on this phone, but it asks for more permissions than I want to give (which, of course, is not PA's fault). So admittedly I didn't really give it a full and fair trial but those few little issues sent me back to the (usually) reliable familiarity of LOS.
I received a new LEX722 yesterday. The TWRP for zl1 is working fine, but I cannot get lineagos working.
I deleted:
- dalvik,
- system,
- cache
- data
- and also the internal storage
after rebooting into twrp I enabled usb debugguung and pushed the lineageos and gapps images via adb push to the phone.
I installed lineageos and gapps nano, but after booting to system, I get stuck in a black screen looping to a dark grey luminated display (no graphics at all).
Heistergand said:
I received a new LEX722 yesterday. The TWRP for zl1 is working fine, but I cannot get lineagos working.
I deleted:
- dalvik,
- system,
- cache
- data
- and also the internal storage
after rebooting into twrp I enabled usb debugguung and pushed the lineageos and gapps images via adb push to the phone.
I installed lineageos and gapps nano, but after booting to system, I get stuck in a black screen looping to a dark grey luminated display (no graphics at all).
Click to expand...
Click to collapse
Sorry, can't help you with that since I have a LEX727 which is apparently quite different from the LEX722. Official LineageOS is only supported on the LEX720 and LEX727: [ https://wiki.lineageos.org/devices/zl1 ]. The LEX722 (Elite) has it's own section here on the LeEco Pro 3 forum so check that out and see what they've come up with.